2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/pci.h>
29 #include <linux/mc146818rtc.h>
30 #include <linux/compiler.h>
31 #include <linux/acpi.h>
32 #include <linux/module.h>
33 #include <linux/syscore_ops.h>
34 #include <linux/msi.h>
35 #include <linux/htirq.h>
36 #include <linux/freezer.h>
37 #include <linux/kthread.h>
38 #include <linux/jiffies.h> /* time_after() */
39 #include <linux/slab.h>
41 #include <acpi/acpi_bus.h>
43 #include <linux/bootmem.h>
44 #include <linux/dmar.h>
45 #include <linux/hpet.h>
52 #include <asm/proto.h>
55 #include <asm/timer.h>
56 #include <asm/i8259.h>
57 #include <asm/msidef.h>
58 #include <asm/hypertransport.h>
59 #include <asm/setup.h>
60 #include <asm/irq_remapping.h>
62 #include <asm/hw_irq.h>
66 #define __apicdebuginit(type) static type __init
68 #define for_each_irq_pin(entry, head) \
69 for (entry = head; entry; entry = entry->next)
71 #ifdef CONFIG_IRQ_REMAP
72 static void irq_remap_modify_chip_defaults(struct irq_chip
*chip
);
73 static inline bool irq_remapped(struct irq_cfg
*cfg
)
75 return cfg
->irq_2_iommu
.iommu
!= NULL
;
78 static inline bool irq_remapped(struct irq_cfg
*cfg
)
82 static inline void irq_remap_modify_chip_defaults(struct irq_chip
*chip
)
88 * Is the SiS APIC rmw bug present ?
89 * -1 = don't know, 0 = no, 1 = yes
91 int sis_apic_bug
= -1;
93 static DEFINE_RAW_SPINLOCK(ioapic_lock
);
94 static DEFINE_RAW_SPINLOCK(vector_lock
);
96 static struct ioapic
{
98 * # of IRQ routing registers
102 * Saved state during suspend/resume, or while enabling intr-remap.
104 struct IO_APIC_route_entry
*saved_registers
;
105 /* I/O APIC config */
106 struct mpc_ioapic mp_config
;
107 /* IO APIC gsi routing info */
108 struct mp_ioapic_gsi gsi_config
;
109 DECLARE_BITMAP(pin_programmed
, MP_MAX_IOAPIC_PIN
+ 1);
110 } ioapics
[MAX_IO_APICS
];
112 #define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver
114 int mpc_ioapic_id(int ioapic_idx
)
116 return ioapics
[ioapic_idx
].mp_config
.apicid
;
119 unsigned int mpc_ioapic_addr(int ioapic_idx
)
121 return ioapics
[ioapic_idx
].mp_config
.apicaddr
;
124 struct mp_ioapic_gsi
*mp_ioapic_gsi_routing(int ioapic_idx
)
126 return &ioapics
[ioapic_idx
].gsi_config
;
131 /* The one past the highest gsi number used */
134 /* MP IRQ source entries */
135 struct mpc_intsrc mp_irqs
[MAX_IRQ_SOURCES
];
137 /* # of MP IRQ source entries */
141 static int nr_irqs_gsi
= NR_IRQS_LEGACY
;
144 int mp_bus_id_to_type
[MAX_MP_BUSSES
];
147 DECLARE_BITMAP(mp_bus_not_pci
, MAX_MP_BUSSES
);
149 int skip_ioapic_setup
;
152 * disable_ioapic_support() - disables ioapic support at runtime
154 void disable_ioapic_support(void)
158 noioapicreroute
= -1;
160 skip_ioapic_setup
= 1;
163 static int __init
parse_noapic(char *str
)
165 /* disable IO-APIC */
166 disable_ioapic_support();
169 early_param("noapic", parse_noapic
);
171 static int io_apic_setup_irq_pin(unsigned int irq
, int node
,
172 struct io_apic_irq_attr
*attr
);
174 /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
175 void mp_save_irq(struct mpc_intsrc
*m
)
179 apic_printk(APIC_VERBOSE
, "Int: type %d, pol %d, trig %d, bus %02x,"
180 " IRQ %02x, APIC ID %x, APIC INT %02x\n",
181 m
->irqtype
, m
->irqflag
& 3, (m
->irqflag
>> 2) & 3, m
->srcbus
,
182 m
->srcbusirq
, m
->dstapic
, m
->dstirq
);
184 for (i
= 0; i
< mp_irq_entries
; i
++) {
185 if (!memcmp(&mp_irqs
[i
], m
, sizeof(*m
)))
189 memcpy(&mp_irqs
[mp_irq_entries
], m
, sizeof(*m
));
190 if (++mp_irq_entries
== MAX_IRQ_SOURCES
)
191 panic("Max # of irq sources exceeded!!\n");
194 struct irq_pin_list
{
196 struct irq_pin_list
*next
;
199 static struct irq_pin_list
*alloc_irq_pin_list(int node
)
201 return kzalloc_node(sizeof(struct irq_pin_list
), GFP_KERNEL
, node
);
205 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
206 static struct irq_cfg irq_cfgx
[NR_IRQS_LEGACY
];
208 int __init
arch_early_irq_init(void)
213 if (!legacy_pic
->nr_legacy_irqs
)
216 for (i
= 0; i
< nr_ioapics
; i
++) {
217 ioapics
[i
].saved_registers
=
218 kzalloc(sizeof(struct IO_APIC_route_entry
) *
219 ioapics
[i
].nr_registers
, GFP_KERNEL
);
220 if (!ioapics
[i
].saved_registers
)
221 pr_err("IOAPIC %d: suspend/resume impossible!\n", i
);
225 count
= ARRAY_SIZE(irq_cfgx
);
226 node
= cpu_to_node(0);
228 /* Make sure the legacy interrupts are marked in the bitmap */
229 irq_reserve_irqs(0, legacy_pic
->nr_legacy_irqs
);
231 for (i
= 0; i
< count
; i
++) {
232 irq_set_chip_data(i
, &cfg
[i
]);
233 zalloc_cpumask_var_node(&cfg
[i
].domain
, GFP_KERNEL
, node
);
234 zalloc_cpumask_var_node(&cfg
[i
].old_domain
, GFP_KERNEL
, node
);
236 * For legacy IRQ's, start with assigning irq0 to irq15 to
237 * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0.
239 if (i
< legacy_pic
->nr_legacy_irqs
) {
240 cfg
[i
].vector
= IRQ0_VECTOR
+ i
;
241 cpumask_set_cpu(0, cfg
[i
].domain
);
248 static struct irq_cfg
*irq_cfg(unsigned int irq
)
250 return irq_get_chip_data(irq
);
253 static struct irq_cfg
*alloc_irq_cfg(unsigned int irq
, int node
)
257 cfg
= kzalloc_node(sizeof(*cfg
), GFP_KERNEL
, node
);
260 if (!zalloc_cpumask_var_node(&cfg
->domain
, GFP_KERNEL
, node
))
262 if (!zalloc_cpumask_var_node(&cfg
->old_domain
, GFP_KERNEL
, node
))
266 free_cpumask_var(cfg
->domain
);
272 static void free_irq_cfg(unsigned int at
, struct irq_cfg
*cfg
)
276 irq_set_chip_data(at
, NULL
);
277 free_cpumask_var(cfg
->domain
);
278 free_cpumask_var(cfg
->old_domain
);
282 static struct irq_cfg
*alloc_irq_and_cfg_at(unsigned int at
, int node
)
284 int res
= irq_alloc_desc_at(at
, node
);
290 cfg
= irq_get_chip_data(at
);
295 cfg
= alloc_irq_cfg(at
, node
);
297 irq_set_chip_data(at
, cfg
);
303 static int alloc_irq_from(unsigned int from
, int node
)
305 return irq_alloc_desc_from(from
, node
);
308 static void free_irq_at(unsigned int at
, struct irq_cfg
*cfg
)
310 free_irq_cfg(at
, cfg
);
317 unsigned int unused
[3];
319 unsigned int unused2
[11];
323 static __attribute_const__
struct io_apic __iomem
*io_apic_base(int idx
)
325 return (void __iomem
*) __fix_to_virt(FIX_IO_APIC_BASE_0
+ idx
)
326 + (mpc_ioapic_addr(idx
) & ~PAGE_MASK
);
329 static inline void io_apic_eoi(unsigned int apic
, unsigned int vector
)
331 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
332 writel(vector
, &io_apic
->eoi
);
335 unsigned int native_io_apic_read(unsigned int apic
, unsigned int reg
)
337 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
338 writel(reg
, &io_apic
->index
);
339 return readl(&io_apic
->data
);
342 void native_io_apic_write(unsigned int apic
, unsigned int reg
, unsigned int value
)
344 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
346 writel(reg
, &io_apic
->index
);
347 writel(value
, &io_apic
->data
);
351 * Re-write a value: to be used for read-modify-write
352 * cycles where the read already set up the index register.
354 * Older SiS APIC requires we rewrite the index register
356 void native_io_apic_modify(unsigned int apic
, unsigned int reg
, unsigned int value
)
358 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
361 writel(reg
, &io_apic
->index
);
362 writel(value
, &io_apic
->data
);
366 struct { u32 w1
, w2
; };
367 struct IO_APIC_route_entry entry
;
370 static struct IO_APIC_route_entry
__ioapic_read_entry(int apic
, int pin
)
372 union entry_union eu
;
374 eu
.w1
= io_apic_read(apic
, 0x10 + 2 * pin
);
375 eu
.w2
= io_apic_read(apic
, 0x11 + 2 * pin
);
380 static struct IO_APIC_route_entry
ioapic_read_entry(int apic
, int pin
)
382 union entry_union eu
;
385 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
386 eu
.entry
= __ioapic_read_entry(apic
, pin
);
387 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
393 * When we write a new IO APIC routing entry, we need to write the high
394 * word first! If the mask bit in the low word is clear, we will enable
395 * the interrupt, and we need to make sure the entry is fully populated
396 * before that happens.
398 static void __ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
400 union entry_union eu
= {{0, 0}};
403 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
404 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
407 static void ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
411 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
412 __ioapic_write_entry(apic
, pin
, e
);
413 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
417 * When we mask an IO APIC routing entry, we need to write the low
418 * word first, in order to set the mask bit before we change the
421 static void ioapic_mask_entry(int apic
, int pin
)
424 union entry_union eu
= { .entry
.mask
= 1 };
426 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
427 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
428 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
429 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
433 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
434 * shared ISA-space IRQs, so we have to support them. We are super
435 * fast in the common case, and fast for shared ISA-space IRQs.
437 static int __add_pin_to_irq_node(struct irq_cfg
*cfg
, int node
, int apic
, int pin
)
439 struct irq_pin_list
**last
, *entry
;
441 /* don't allow duplicates */
442 last
= &cfg
->irq_2_pin
;
443 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
444 if (entry
->apic
== apic
&& entry
->pin
== pin
)
449 entry
= alloc_irq_pin_list(node
);
451 pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
462 static void add_pin_to_irq_node(struct irq_cfg
*cfg
, int node
, int apic
, int pin
)
464 if (__add_pin_to_irq_node(cfg
, node
, apic
, pin
))
465 panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
469 * Reroute an IRQ to a different pin.
471 static void __init
replace_pin_at_irq_node(struct irq_cfg
*cfg
, int node
,
472 int oldapic
, int oldpin
,
473 int newapic
, int newpin
)
475 struct irq_pin_list
*entry
;
477 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
478 if (entry
->apic
== oldapic
&& entry
->pin
== oldpin
) {
479 entry
->apic
= newapic
;
481 /* every one is different, right? */
486 /* old apic/pin didn't exist, so just add new ones */
487 add_pin_to_irq_node(cfg
, node
, newapic
, newpin
);
490 static void __io_apic_modify_irq(struct irq_pin_list
*entry
,
491 int mask_and
, int mask_or
,
492 void (*final
)(struct irq_pin_list
*entry
))
494 unsigned int reg
, pin
;
497 reg
= io_apic_read(entry
->apic
, 0x10 + pin
* 2);
500 io_apic_modify(entry
->apic
, 0x10 + pin
* 2, reg
);
505 static void io_apic_modify_irq(struct irq_cfg
*cfg
,
506 int mask_and
, int mask_or
,
507 void (*final
)(struct irq_pin_list
*entry
))
509 struct irq_pin_list
*entry
;
511 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
512 __io_apic_modify_irq(entry
, mask_and
, mask_or
, final
);
515 static void io_apic_sync(struct irq_pin_list
*entry
)
518 * Synchronize the IO-APIC and the CPU by doing
519 * a dummy read from the IO-APIC
521 struct io_apic __iomem
*io_apic
;
523 io_apic
= io_apic_base(entry
->apic
);
524 readl(&io_apic
->data
);
527 static void mask_ioapic(struct irq_cfg
*cfg
)
531 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
532 io_apic_modify_irq(cfg
, ~0, IO_APIC_REDIR_MASKED
, &io_apic_sync
);
533 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
536 static void mask_ioapic_irq(struct irq_data
*data
)
538 mask_ioapic(data
->chip_data
);
541 static void __unmask_ioapic(struct irq_cfg
*cfg
)
543 io_apic_modify_irq(cfg
, ~IO_APIC_REDIR_MASKED
, 0, NULL
);
546 static void unmask_ioapic(struct irq_cfg
*cfg
)
550 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
551 __unmask_ioapic(cfg
);
552 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
555 static void unmask_ioapic_irq(struct irq_data
*data
)
557 unmask_ioapic(data
->chip_data
);
561 * IO-APIC versions below 0x20 don't support EOI register.
562 * For the record, here is the information about various versions:
564 * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant
565 * 2Xh I/O(x)APIC which is PCI 2.2 Compliant
568 * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
569 * version as 0x2. This is an error with documentation and these ICH chips
570 * use io-apic's of version 0x20.
572 * For IO-APIC's with EOI register, we use that to do an explicit EOI.
573 * Otherwise, we simulate the EOI message manually by changing the trigger
574 * mode to edge and then back to level, with RTE being masked during this.
576 static void __eoi_ioapic_pin(int apic
, int pin
, int vector
, struct irq_cfg
*cfg
)
578 if (mpc_ioapic_ver(apic
) >= 0x20) {
580 * Intr-remapping uses pin number as the virtual vector
581 * in the RTE. Actual vector is programmed in
582 * intr-remapping table entry. Hence for the io-apic
583 * EOI we use the pin number.
585 if (cfg
&& irq_remapped(cfg
))
586 io_apic_eoi(apic
, pin
);
588 io_apic_eoi(apic
, vector
);
590 struct IO_APIC_route_entry entry
, entry1
;
592 entry
= entry1
= __ioapic_read_entry(apic
, pin
);
595 * Mask the entry and change the trigger mode to edge.
598 entry1
.trigger
= IOAPIC_EDGE
;
600 __ioapic_write_entry(apic
, pin
, entry1
);
603 * Restore the previous level triggered entry.
605 __ioapic_write_entry(apic
, pin
, entry
);
609 static void eoi_ioapic_irq(unsigned int irq
, struct irq_cfg
*cfg
)
611 struct irq_pin_list
*entry
;
614 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
615 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
616 __eoi_ioapic_pin(entry
->apic
, entry
->pin
, cfg
->vector
, cfg
);
617 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
620 static void clear_IO_APIC_pin(unsigned int apic
, unsigned int pin
)
622 struct IO_APIC_route_entry entry
;
624 /* Check delivery_mode to be sure we're not clearing an SMI pin */
625 entry
= ioapic_read_entry(apic
, pin
);
626 if (entry
.delivery_mode
== dest_SMI
)
630 * Make sure the entry is masked and re-read the contents to check
631 * if it is a level triggered pin and if the remote-IRR is set.
635 ioapic_write_entry(apic
, pin
, entry
);
636 entry
= ioapic_read_entry(apic
, pin
);
643 * Make sure the trigger mode is set to level. Explicit EOI
644 * doesn't clear the remote-IRR if the trigger mode is not
647 if (!entry
.trigger
) {
648 entry
.trigger
= IOAPIC_LEVEL
;
649 ioapic_write_entry(apic
, pin
, entry
);
652 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
653 __eoi_ioapic_pin(apic
, pin
, entry
.vector
, NULL
);
654 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
658 * Clear the rest of the bits in the IO-APIC RTE except for the mask
661 ioapic_mask_entry(apic
, pin
);
662 entry
= ioapic_read_entry(apic
, pin
);
664 pr_err("Unable to reset IRR for apic: %d, pin :%d\n",
665 mpc_ioapic_id(apic
), pin
);
668 static void clear_IO_APIC (void)
672 for (apic
= 0; apic
< nr_ioapics
; apic
++)
673 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++)
674 clear_IO_APIC_pin(apic
, pin
);
679 * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
680 * specific CPU-side IRQs.
684 static int pirq_entries
[MAX_PIRQS
] = {
685 [0 ... MAX_PIRQS
- 1] = -1
688 static int __init
ioapic_pirq_setup(char *str
)
691 int ints
[MAX_PIRQS
+1];
693 get_options(str
, ARRAY_SIZE(ints
), ints
);
695 apic_printk(APIC_VERBOSE
, KERN_INFO
696 "PIRQ redirection, working around broken MP-BIOS.\n");
698 if (ints
[0] < MAX_PIRQS
)
701 for (i
= 0; i
< max
; i
++) {
702 apic_printk(APIC_VERBOSE
, KERN_DEBUG
703 "... PIRQ%d -> IRQ %d\n", i
, ints
[i
+1]);
705 * PIRQs are mapped upside down, usually.
707 pirq_entries
[MAX_PIRQS
-i
-1] = ints
[i
+1];
712 __setup("pirq=", ioapic_pirq_setup
);
713 #endif /* CONFIG_X86_32 */
716 * Saves all the IO-APIC RTE's
718 int save_ioapic_entries(void)
723 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
724 if (!ioapics
[apic
].saved_registers
) {
729 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++)
730 ioapics
[apic
].saved_registers
[pin
] =
731 ioapic_read_entry(apic
, pin
);
738 * Mask all IO APIC entries.
740 void mask_ioapic_entries(void)
744 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
745 if (!ioapics
[apic
].saved_registers
)
748 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++) {
749 struct IO_APIC_route_entry entry
;
751 entry
= ioapics
[apic
].saved_registers
[pin
];
754 ioapic_write_entry(apic
, pin
, entry
);
761 * Restore IO APIC entries which was saved in the ioapic structure.
763 int restore_ioapic_entries(void)
767 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
768 if (!ioapics
[apic
].saved_registers
)
771 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++)
772 ioapic_write_entry(apic
, pin
,
773 ioapics
[apic
].saved_registers
[pin
]);
779 * Find the IRQ entry number of a certain pin.
781 static int find_irq_entry(int ioapic_idx
, int pin
, int type
)
785 for (i
= 0; i
< mp_irq_entries
; i
++)
786 if (mp_irqs
[i
].irqtype
== type
&&
787 (mp_irqs
[i
].dstapic
== mpc_ioapic_id(ioapic_idx
) ||
788 mp_irqs
[i
].dstapic
== MP_APIC_ALL
) &&
789 mp_irqs
[i
].dstirq
== pin
)
796 * Find the pin to which IRQ[irq] (ISA) is connected
798 static int __init
find_isa_irq_pin(int irq
, int type
)
802 for (i
= 0; i
< mp_irq_entries
; i
++) {
803 int lbus
= mp_irqs
[i
].srcbus
;
805 if (test_bit(lbus
, mp_bus_not_pci
) &&
806 (mp_irqs
[i
].irqtype
== type
) &&
807 (mp_irqs
[i
].srcbusirq
== irq
))
809 return mp_irqs
[i
].dstirq
;
814 static int __init
find_isa_irq_apic(int irq
, int type
)
818 for (i
= 0; i
< mp_irq_entries
; i
++) {
819 int lbus
= mp_irqs
[i
].srcbus
;
821 if (test_bit(lbus
, mp_bus_not_pci
) &&
822 (mp_irqs
[i
].irqtype
== type
) &&
823 (mp_irqs
[i
].srcbusirq
== irq
))
827 if (i
< mp_irq_entries
) {
830 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
831 if (mpc_ioapic_id(ioapic_idx
) == mp_irqs
[i
].dstapic
)
840 * EISA Edge/Level control register, ELCR
842 static int EISA_ELCR(unsigned int irq
)
844 if (irq
< legacy_pic
->nr_legacy_irqs
) {
845 unsigned int port
= 0x4d0 + (irq
>> 3);
846 return (inb(port
) >> (irq
& 7)) & 1;
848 apic_printk(APIC_VERBOSE
, KERN_INFO
849 "Broken MPtable reports ISA irq %d\n", irq
);
855 /* ISA interrupts are always polarity zero edge triggered,
856 * when listed as conforming in the MP table. */
858 #define default_ISA_trigger(idx) (0)
859 #define default_ISA_polarity(idx) (0)
861 /* EISA interrupts are always polarity zero and can be edge or level
862 * trigger depending on the ELCR value. If an interrupt is listed as
863 * EISA conforming in the MP table, that means its trigger type must
864 * be read in from the ELCR */
866 #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq))
867 #define default_EISA_polarity(idx) default_ISA_polarity(idx)
869 /* PCI interrupts are always polarity one level triggered,
870 * when listed as conforming in the MP table. */
872 #define default_PCI_trigger(idx) (1)
873 #define default_PCI_polarity(idx) (1)
875 static int irq_polarity(int idx
)
877 int bus
= mp_irqs
[idx
].srcbus
;
881 * Determine IRQ line polarity (high active or low active):
883 switch (mp_irqs
[idx
].irqflag
& 3)
885 case 0: /* conforms, ie. bus-type dependent polarity */
886 if (test_bit(bus
, mp_bus_not_pci
))
887 polarity
= default_ISA_polarity(idx
);
889 polarity
= default_PCI_polarity(idx
);
891 case 1: /* high active */
896 case 2: /* reserved */
898 pr_warn("broken BIOS!!\n");
902 case 3: /* low active */
907 default: /* invalid */
909 pr_warn("broken BIOS!!\n");
917 static int irq_trigger(int idx
)
919 int bus
= mp_irqs
[idx
].srcbus
;
923 * Determine IRQ trigger mode (edge or level sensitive):
925 switch ((mp_irqs
[idx
].irqflag
>>2) & 3)
927 case 0: /* conforms, ie. bus-type dependent */
928 if (test_bit(bus
, mp_bus_not_pci
))
929 trigger
= default_ISA_trigger(idx
);
931 trigger
= default_PCI_trigger(idx
);
933 switch (mp_bus_id_to_type
[bus
]) {
934 case MP_BUS_ISA
: /* ISA pin */
936 /* set before the switch */
939 case MP_BUS_EISA
: /* EISA pin */
941 trigger
= default_EISA_trigger(idx
);
944 case MP_BUS_PCI
: /* PCI pin */
946 /* set before the switch */
951 pr_warn("broken BIOS!!\n");
963 case 2: /* reserved */
965 pr_warn("broken BIOS!!\n");
974 default: /* invalid */
976 pr_warn("broken BIOS!!\n");
984 static int pin_2_irq(int idx
, int apic
, int pin
)
987 int bus
= mp_irqs
[idx
].srcbus
;
988 struct mp_ioapic_gsi
*gsi_cfg
= mp_ioapic_gsi_routing(apic
);
991 * Debugging check, we are in big trouble if this message pops up!
993 if (mp_irqs
[idx
].dstirq
!= pin
)
994 pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");
996 if (test_bit(bus
, mp_bus_not_pci
)) {
997 irq
= mp_irqs
[idx
].srcbusirq
;
999 u32 gsi
= gsi_cfg
->gsi_base
+ pin
;
1001 if (gsi
>= NR_IRQS_LEGACY
)
1004 irq
= gsi_top
+ gsi
;
1007 #ifdef CONFIG_X86_32
1009 * PCI IRQ command line redirection. Yes, limits are hardcoded.
1011 if ((pin
>= 16) && (pin
<= 23)) {
1012 if (pirq_entries
[pin
-16] != -1) {
1013 if (!pirq_entries
[pin
-16]) {
1014 apic_printk(APIC_VERBOSE
, KERN_DEBUG
1015 "disabling PIRQ%d\n", pin
-16);
1017 irq
= pirq_entries
[pin
-16];
1018 apic_printk(APIC_VERBOSE
, KERN_DEBUG
1019 "using PIRQ%d -> IRQ %d\n",
1030 * Find a specific PCI IRQ entry.
1031 * Not an __init, possibly needed by modules
1033 int IO_APIC_get_PCI_irq_vector(int bus
, int slot
, int pin
,
1034 struct io_apic_irq_attr
*irq_attr
)
1036 int ioapic_idx
, i
, best_guess
= -1;
1038 apic_printk(APIC_DEBUG
,
1039 "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
1041 if (test_bit(bus
, mp_bus_not_pci
)) {
1042 apic_printk(APIC_VERBOSE
,
1043 "PCI BIOS passed nonexistent PCI bus %d!\n", bus
);
1046 for (i
= 0; i
< mp_irq_entries
; i
++) {
1047 int lbus
= mp_irqs
[i
].srcbus
;
1049 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1050 if (mpc_ioapic_id(ioapic_idx
) == mp_irqs
[i
].dstapic
||
1051 mp_irqs
[i
].dstapic
== MP_APIC_ALL
)
1054 if (!test_bit(lbus
, mp_bus_not_pci
) &&
1055 !mp_irqs
[i
].irqtype
&&
1057 (slot
== ((mp_irqs
[i
].srcbusirq
>> 2) & 0x1f))) {
1058 int irq
= pin_2_irq(i
, ioapic_idx
, mp_irqs
[i
].dstirq
);
1060 if (!(ioapic_idx
|| IO_APIC_IRQ(irq
)))
1063 if (pin
== (mp_irqs
[i
].srcbusirq
& 3)) {
1064 set_io_apic_irq_attr(irq_attr
, ioapic_idx
,
1071 * Use the first all-but-pin matching entry as a
1072 * best-guess fuzzy result for broken mptables.
1074 if (best_guess
< 0) {
1075 set_io_apic_irq_attr(irq_attr
, ioapic_idx
,
1085 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector
);
1087 void lock_vector_lock(void)
1089 /* Used to the online set of cpus does not change
1090 * during assign_irq_vector.
1092 raw_spin_lock(&vector_lock
);
1095 void unlock_vector_lock(void)
1097 raw_spin_unlock(&vector_lock
);
1101 __assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
)
1104 * NOTE! The local APIC isn't very good at handling
1105 * multiple interrupts at the same interrupt level.
1106 * As the interrupt level is determined by taking the
1107 * vector number and shifting that right by 4, we
1108 * want to spread these out a bit so that they don't
1109 * all fall in the same interrupt level.
1111 * Also, we've got to be careful not to trash gate
1112 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1114 static int current_vector
= FIRST_EXTERNAL_VECTOR
+ VECTOR_OFFSET_START
;
1115 static int current_offset
= VECTOR_OFFSET_START
% 16;
1117 cpumask_var_t tmp_mask
;
1119 if (cfg
->move_in_progress
)
1122 if (!alloc_cpumask_var(&tmp_mask
, GFP_ATOMIC
))
1125 /* Only try and allocate irqs on cpus that are present */
1127 cpumask_clear(cfg
->old_domain
);
1128 cpu
= cpumask_first_and(mask
, cpu_online_mask
);
1129 while (cpu
< nr_cpu_ids
) {
1130 int new_cpu
, vector
, offset
;
1132 apic
->vector_allocation_domain(cpu
, tmp_mask
, mask
);
1134 if (cpumask_subset(tmp_mask
, cfg
->domain
)) {
1136 if (cpumask_equal(tmp_mask
, cfg
->domain
))
1139 * New cpumask using the vector is a proper subset of
1140 * the current in use mask. So cleanup the vector
1141 * allocation for the members that are not used anymore.
1143 cpumask_andnot(cfg
->old_domain
, cfg
->domain
, tmp_mask
);
1144 cfg
->move_in_progress
= 1;
1145 cpumask_and(cfg
->domain
, cfg
->domain
, tmp_mask
);
1149 vector
= current_vector
;
1150 offset
= current_offset
;
1153 if (vector
>= first_system_vector
) {
1154 offset
= (offset
+ 1) % 16;
1155 vector
= FIRST_EXTERNAL_VECTOR
+ offset
;
1158 if (unlikely(current_vector
== vector
)) {
1159 cpumask_or(cfg
->old_domain
, cfg
->old_domain
, tmp_mask
);
1160 cpumask_andnot(tmp_mask
, mask
, cfg
->old_domain
);
1161 cpu
= cpumask_first_and(tmp_mask
, cpu_online_mask
);
1165 if (test_bit(vector
, used_vectors
))
1168 for_each_cpu_and(new_cpu
, tmp_mask
, cpu_online_mask
)
1169 if (per_cpu(vector_irq
, new_cpu
)[vector
] != -1)
1172 current_vector
= vector
;
1173 current_offset
= offset
;
1175 cfg
->move_in_progress
= 1;
1176 cpumask_copy(cfg
->old_domain
, cfg
->domain
);
1178 for_each_cpu_and(new_cpu
, tmp_mask
, cpu_online_mask
)
1179 per_cpu(vector_irq
, new_cpu
)[vector
] = irq
;
1180 cfg
->vector
= vector
;
1181 cpumask_copy(cfg
->domain
, tmp_mask
);
1185 free_cpumask_var(tmp_mask
);
1189 int assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
)
1192 unsigned long flags
;
1194 raw_spin_lock_irqsave(&vector_lock
, flags
);
1195 err
= __assign_irq_vector(irq
, cfg
, mask
);
1196 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
1200 static void __clear_irq_vector(int irq
, struct irq_cfg
*cfg
)
1204 BUG_ON(!cfg
->vector
);
1206 vector
= cfg
->vector
;
1207 for_each_cpu(cpu
, cfg
->domain
)
1208 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1211 cpumask_clear(cfg
->domain
);
1213 if (likely(!cfg
->move_in_progress
))
1215 for_each_cpu(cpu
, cfg
->old_domain
) {
1216 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
;
1218 if (per_cpu(vector_irq
, cpu
)[vector
] != irq
)
1220 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1224 cfg
->move_in_progress
= 0;
1227 void __setup_vector_irq(int cpu
)
1229 /* Initialize vector_irq on a new cpu */
1231 struct irq_cfg
*cfg
;
1234 * vector_lock will make sure that we don't run into irq vector
1235 * assignments that might be happening on another cpu in parallel,
1236 * while we setup our initial vector to irq mappings.
1238 raw_spin_lock(&vector_lock
);
1239 /* Mark the inuse vectors */
1240 for_each_active_irq(irq
) {
1241 cfg
= irq_get_chip_data(irq
);
1245 * If it is a legacy IRQ handled by the legacy PIC, this cpu
1246 * will be part of the irq_cfg's domain.
1248 if (irq
< legacy_pic
->nr_legacy_irqs
&& !IO_APIC_IRQ(irq
))
1249 cpumask_set_cpu(cpu
, cfg
->domain
);
1251 if (!cpumask_test_cpu(cpu
, cfg
->domain
))
1253 vector
= cfg
->vector
;
1254 per_cpu(vector_irq
, cpu
)[vector
] = irq
;
1256 /* Mark the free vectors */
1257 for (vector
= 0; vector
< NR_VECTORS
; ++vector
) {
1258 irq
= per_cpu(vector_irq
, cpu
)[vector
];
1263 if (!cpumask_test_cpu(cpu
, cfg
->domain
))
1264 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1266 raw_spin_unlock(&vector_lock
);
1269 static struct irq_chip ioapic_chip
;
1271 #ifdef CONFIG_X86_32
1272 static inline int IO_APIC_irq_trigger(int irq
)
1276 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
1277 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++) {
1278 idx
= find_irq_entry(apic
, pin
, mp_INT
);
1279 if ((idx
!= -1) && (irq
== pin_2_irq(idx
, apic
, pin
)))
1280 return irq_trigger(idx
);
1284 * nonexistent IRQs are edge default
1289 static inline int IO_APIC_irq_trigger(int irq
)
1295 static void ioapic_register_intr(unsigned int irq
, struct irq_cfg
*cfg
,
1296 unsigned long trigger
)
1298 struct irq_chip
*chip
= &ioapic_chip
;
1299 irq_flow_handler_t hdl
;
1302 if ((trigger
== IOAPIC_AUTO
&& IO_APIC_irq_trigger(irq
)) ||
1303 trigger
== IOAPIC_LEVEL
) {
1304 irq_set_status_flags(irq
, IRQ_LEVEL
);
1307 irq_clear_status_flags(irq
, IRQ_LEVEL
);
1311 if (irq_remapped(cfg
)) {
1312 irq_set_status_flags(irq
, IRQ_MOVE_PCNTXT
);
1313 irq_remap_modify_chip_defaults(chip
);
1314 fasteoi
= trigger
!= 0;
1317 hdl
= fasteoi
? handle_fasteoi_irq
: handle_edge_irq
;
1318 irq_set_chip_and_handler_name(irq
, chip
, hdl
,
1319 fasteoi
? "fasteoi" : "edge");
1322 static int setup_ioapic_entry(int irq
, struct IO_APIC_route_entry
*entry
,
1323 unsigned int destination
, int vector
,
1324 struct io_apic_irq_attr
*attr
)
1326 if (irq_remapping_enabled
)
1327 return setup_ioapic_remapped_entry(irq
, entry
, destination
,
1330 memset(entry
, 0, sizeof(*entry
));
1332 entry
->delivery_mode
= apic
->irq_delivery_mode
;
1333 entry
->dest_mode
= apic
->irq_dest_mode
;
1334 entry
->dest
= destination
;
1335 entry
->vector
= vector
;
1336 entry
->mask
= 0; /* enable IRQ */
1337 entry
->trigger
= attr
->trigger
;
1338 entry
->polarity
= attr
->polarity
;
1341 * Mask level triggered irqs.
1342 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
1350 static void setup_ioapic_irq(unsigned int irq
, struct irq_cfg
*cfg
,
1351 struct io_apic_irq_attr
*attr
)
1353 struct IO_APIC_route_entry entry
;
1356 if (!IO_APIC_IRQ(irq
))
1359 if (assign_irq_vector(irq
, cfg
, apic
->target_cpus()))
1362 if (apic
->cpu_mask_to_apicid_and(cfg
->domain
, apic
->target_cpus(),
1364 pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n",
1365 mpc_ioapic_id(attr
->ioapic
), attr
->ioapic_pin
);
1366 __clear_irq_vector(irq
, cfg
);
1371 apic_printk(APIC_VERBOSE
,KERN_DEBUG
1372 "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
1373 "IRQ %d Mode:%i Active:%i Dest:%d)\n",
1374 attr
->ioapic
, mpc_ioapic_id(attr
->ioapic
), attr
->ioapic_pin
,
1375 cfg
->vector
, irq
, attr
->trigger
, attr
->polarity
, dest
);
1377 if (setup_ioapic_entry(irq
, &entry
, dest
, cfg
->vector
, attr
)) {
1378 pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
1379 mpc_ioapic_id(attr
->ioapic
), attr
->ioapic_pin
);
1380 __clear_irq_vector(irq
, cfg
);
1385 ioapic_register_intr(irq
, cfg
, attr
->trigger
);
1386 if (irq
< legacy_pic
->nr_legacy_irqs
)
1387 legacy_pic
->mask(irq
);
1389 ioapic_write_entry(attr
->ioapic
, attr
->ioapic_pin
, entry
);
1392 static bool __init
io_apic_pin_not_connected(int idx
, int ioapic_idx
, int pin
)
1397 apic_printk(APIC_VERBOSE
, KERN_DEBUG
" apic %d pin %d not connected\n",
1398 mpc_ioapic_id(ioapic_idx
), pin
);
1402 static void __init
__io_apic_setup_irqs(unsigned int ioapic_idx
)
1404 int idx
, node
= cpu_to_node(0);
1405 struct io_apic_irq_attr attr
;
1406 unsigned int pin
, irq
;
1408 for (pin
= 0; pin
< ioapics
[ioapic_idx
].nr_registers
; pin
++) {
1409 idx
= find_irq_entry(ioapic_idx
, pin
, mp_INT
);
1410 if (io_apic_pin_not_connected(idx
, ioapic_idx
, pin
))
1413 irq
= pin_2_irq(idx
, ioapic_idx
, pin
);
1415 if ((ioapic_idx
> 0) && (irq
> 16))
1419 * Skip the timer IRQ if there's a quirk handler
1420 * installed and if it returns 1:
1422 if (apic
->multi_timer_check
&&
1423 apic
->multi_timer_check(ioapic_idx
, irq
))
1426 set_io_apic_irq_attr(&attr
, ioapic_idx
, pin
, irq_trigger(idx
),
1429 io_apic_setup_irq_pin(irq
, node
, &attr
);
1433 static void __init
setup_IO_APIC_irqs(void)
1435 unsigned int ioapic_idx
;
1437 apic_printk(APIC_VERBOSE
, KERN_DEBUG
"init IO_APIC IRQs\n");
1439 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1440 __io_apic_setup_irqs(ioapic_idx
);
1444 * for the gsit that is not in first ioapic
1445 * but could not use acpi_register_gsi()
1446 * like some special sci in IBM x3330
1448 void setup_IO_APIC_irq_extra(u32 gsi
)
1450 int ioapic_idx
= 0, pin
, idx
, irq
, node
= cpu_to_node(0);
1451 struct io_apic_irq_attr attr
;
1454 * Convert 'gsi' to 'ioapic.pin'.
1456 ioapic_idx
= mp_find_ioapic(gsi
);
1460 pin
= mp_find_ioapic_pin(ioapic_idx
, gsi
);
1461 idx
= find_irq_entry(ioapic_idx
, pin
, mp_INT
);
1465 irq
= pin_2_irq(idx
, ioapic_idx
, pin
);
1467 /* Only handle the non legacy irqs on secondary ioapics */
1468 if (ioapic_idx
== 0 || irq
< NR_IRQS_LEGACY
)
1471 set_io_apic_irq_attr(&attr
, ioapic_idx
, pin
, irq_trigger(idx
),
1474 io_apic_setup_irq_pin_once(irq
, node
, &attr
);
1478 * Set up the timer pin, possibly with the 8259A-master behind.
1480 static void __init
setup_timer_IRQ0_pin(unsigned int ioapic_idx
,
1481 unsigned int pin
, int vector
)
1483 struct IO_APIC_route_entry entry
;
1486 if (irq_remapping_enabled
)
1489 memset(&entry
, 0, sizeof(entry
));
1492 * We use logical delivery to get the timer IRQ
1495 if (unlikely(apic
->cpu_mask_to_apicid_and(apic
->target_cpus(),
1496 apic
->target_cpus(), &dest
)))
1499 entry
.dest_mode
= apic
->irq_dest_mode
;
1500 entry
.mask
= 0; /* don't mask IRQ for edge */
1502 entry
.delivery_mode
= apic
->irq_delivery_mode
;
1505 entry
.vector
= vector
;
1508 * The timer IRQ doesn't have to know that behind the
1509 * scene we may have a 8259A-master in AEOI mode ...
1511 irq_set_chip_and_handler_name(0, &ioapic_chip
, handle_edge_irq
,
1515 * Add it to the IO-APIC irq-routing table:
1517 ioapic_write_entry(ioapic_idx
, pin
, entry
);
1520 __apicdebuginit(void) print_IO_APIC(int ioapic_idx
)
1523 union IO_APIC_reg_00 reg_00
;
1524 union IO_APIC_reg_01 reg_01
;
1525 union IO_APIC_reg_02 reg_02
;
1526 union IO_APIC_reg_03 reg_03
;
1527 unsigned long flags
;
1529 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
1530 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
1531 reg_01
.raw
= io_apic_read(ioapic_idx
, 1);
1532 if (reg_01
.bits
.version
>= 0x10)
1533 reg_02
.raw
= io_apic_read(ioapic_idx
, 2);
1534 if (reg_01
.bits
.version
>= 0x20)
1535 reg_03
.raw
= io_apic_read(ioapic_idx
, 3);
1536 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
1538 printk(KERN_DEBUG
"IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx
));
1539 printk(KERN_DEBUG
".... register #00: %08X\n", reg_00
.raw
);
1540 printk(KERN_DEBUG
"....... : physical APIC id: %02X\n", reg_00
.bits
.ID
);
1541 printk(KERN_DEBUG
"....... : Delivery Type: %X\n", reg_00
.bits
.delivery_type
);
1542 printk(KERN_DEBUG
"....... : LTS : %X\n", reg_00
.bits
.LTS
);
1544 printk(KERN_DEBUG
".... register #01: %08X\n", *(int *)®_01
);
1545 printk(KERN_DEBUG
"....... : max redirection entries: %02X\n",
1546 reg_01
.bits
.entries
);
1548 printk(KERN_DEBUG
"....... : PRQ implemented: %X\n", reg_01
.bits
.PRQ
);
1549 printk(KERN_DEBUG
"....... : IO APIC version: %02X\n",
1550 reg_01
.bits
.version
);
1553 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1554 * but the value of reg_02 is read as the previous read register
1555 * value, so ignore it if reg_02 == reg_01.
1557 if (reg_01
.bits
.version
>= 0x10 && reg_02
.raw
!= reg_01
.raw
) {
1558 printk(KERN_DEBUG
".... register #02: %08X\n", reg_02
.raw
);
1559 printk(KERN_DEBUG
"....... : arbitration: %02X\n", reg_02
.bits
.arbitration
);
1563 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1564 * or reg_03, but the value of reg_0[23] is read as the previous read
1565 * register value, so ignore it if reg_03 == reg_0[12].
1567 if (reg_01
.bits
.version
>= 0x20 && reg_03
.raw
!= reg_02
.raw
&&
1568 reg_03
.raw
!= reg_01
.raw
) {
1569 printk(KERN_DEBUG
".... register #03: %08X\n", reg_03
.raw
);
1570 printk(KERN_DEBUG
"....... : Boot DT : %X\n", reg_03
.bits
.boot_DT
);
1573 printk(KERN_DEBUG
".... IRQ redirection table:\n");
1575 if (irq_remapping_enabled
) {
1576 printk(KERN_DEBUG
" NR Indx Fmt Mask Trig IRR"
1577 " Pol Stat Indx2 Zero Vect:\n");
1579 printk(KERN_DEBUG
" NR Dst Mask Trig IRR Pol"
1580 " Stat Dmod Deli Vect:\n");
1583 for (i
= 0; i
<= reg_01
.bits
.entries
; i
++) {
1584 if (irq_remapping_enabled
) {
1585 struct IO_APIC_route_entry entry
;
1586 struct IR_IO_APIC_route_entry
*ir_entry
;
1588 entry
= ioapic_read_entry(ioapic_idx
, i
);
1589 ir_entry
= (struct IR_IO_APIC_route_entry
*) &entry
;
1590 printk(KERN_DEBUG
" %02x %04X ",
1594 pr_cont("%1d %1d %1d %1d %1d "
1595 "%1d %1d %X %02X\n",
1601 ir_entry
->delivery_status
,
1607 struct IO_APIC_route_entry entry
;
1609 entry
= ioapic_read_entry(ioapic_idx
, i
);
1610 printk(KERN_DEBUG
" %02x %02X ",
1614 pr_cont("%1d %1d %1d %1d %1d "
1620 entry
.delivery_status
,
1622 entry
.delivery_mode
,
1629 __apicdebuginit(void) print_IO_APICs(void)
1632 struct irq_cfg
*cfg
;
1634 struct irq_chip
*chip
;
1636 printk(KERN_DEBUG
"number of MP IRQ sources: %d.\n", mp_irq_entries
);
1637 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1638 printk(KERN_DEBUG
"number of IO-APIC #%d registers: %d.\n",
1639 mpc_ioapic_id(ioapic_idx
),
1640 ioapics
[ioapic_idx
].nr_registers
);
1643 * We are a bit conservative about what we expect. We have to
1644 * know about every hardware change ASAP.
1646 printk(KERN_INFO
"testing the IO APIC.......................\n");
1648 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1649 print_IO_APIC(ioapic_idx
);
1651 printk(KERN_DEBUG
"IRQ to pin mappings:\n");
1652 for_each_active_irq(irq
) {
1653 struct irq_pin_list
*entry
;
1655 chip
= irq_get_chip(irq
);
1656 if (chip
!= &ioapic_chip
)
1659 cfg
= irq_get_chip_data(irq
);
1662 entry
= cfg
->irq_2_pin
;
1665 printk(KERN_DEBUG
"IRQ%d ", irq
);
1666 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
1667 pr_cont("-> %d:%d", entry
->apic
, entry
->pin
);
1671 printk(KERN_INFO
".................................... done.\n");
1674 __apicdebuginit(void) print_APIC_field(int base
)
1680 for (i
= 0; i
< 8; i
++)
1681 pr_cont("%08x", apic_read(base
+ i
*0x10));
1686 __apicdebuginit(void) print_local_APIC(void *dummy
)
1688 unsigned int i
, v
, ver
, maxlvt
;
1691 printk(KERN_DEBUG
"printing local APIC contents on CPU#%d/%d:\n",
1692 smp_processor_id(), hard_smp_processor_id());
1693 v
= apic_read(APIC_ID
);
1694 printk(KERN_INFO
"... APIC ID: %08x (%01x)\n", v
, read_apic_id());
1695 v
= apic_read(APIC_LVR
);
1696 printk(KERN_INFO
"... APIC VERSION: %08x\n", v
);
1697 ver
= GET_APIC_VERSION(v
);
1698 maxlvt
= lapic_get_maxlvt();
1700 v
= apic_read(APIC_TASKPRI
);
1701 printk(KERN_DEBUG
"... APIC TASKPRI: %08x (%02x)\n", v
, v
& APIC_TPRI_MASK
);
1703 if (APIC_INTEGRATED(ver
)) { /* !82489DX */
1704 if (!APIC_XAPIC(ver
)) {
1705 v
= apic_read(APIC_ARBPRI
);
1706 printk(KERN_DEBUG
"... APIC ARBPRI: %08x (%02x)\n", v
,
1707 v
& APIC_ARBPRI_MASK
);
1709 v
= apic_read(APIC_PROCPRI
);
1710 printk(KERN_DEBUG
"... APIC PROCPRI: %08x\n", v
);
1714 * Remote read supported only in the 82489DX and local APIC for
1715 * Pentium processors.
1717 if (!APIC_INTEGRATED(ver
) || maxlvt
== 3) {
1718 v
= apic_read(APIC_RRR
);
1719 printk(KERN_DEBUG
"... APIC RRR: %08x\n", v
);
1722 v
= apic_read(APIC_LDR
);
1723 printk(KERN_DEBUG
"... APIC LDR: %08x\n", v
);
1724 if (!x2apic_enabled()) {
1725 v
= apic_read(APIC_DFR
);
1726 printk(KERN_DEBUG
"... APIC DFR: %08x\n", v
);
1728 v
= apic_read(APIC_SPIV
);
1729 printk(KERN_DEBUG
"... APIC SPIV: %08x\n", v
);
1731 printk(KERN_DEBUG
"... APIC ISR field:\n");
1732 print_APIC_field(APIC_ISR
);
1733 printk(KERN_DEBUG
"... APIC TMR field:\n");
1734 print_APIC_field(APIC_TMR
);
1735 printk(KERN_DEBUG
"... APIC IRR field:\n");
1736 print_APIC_field(APIC_IRR
);
1738 if (APIC_INTEGRATED(ver
)) { /* !82489DX */
1739 if (maxlvt
> 3) /* Due to the Pentium erratum 3AP. */
1740 apic_write(APIC_ESR
, 0);
1742 v
= apic_read(APIC_ESR
);
1743 printk(KERN_DEBUG
"... APIC ESR: %08x\n", v
);
1746 icr
= apic_icr_read();
1747 printk(KERN_DEBUG
"... APIC ICR: %08x\n", (u32
)icr
);
1748 printk(KERN_DEBUG
"... APIC ICR2: %08x\n", (u32
)(icr
>> 32));
1750 v
= apic_read(APIC_LVTT
);
1751 printk(KERN_DEBUG
"... APIC LVTT: %08x\n", v
);
1753 if (maxlvt
> 3) { /* PC is LVT#4. */
1754 v
= apic_read(APIC_LVTPC
);
1755 printk(KERN_DEBUG
"... APIC LVTPC: %08x\n", v
);
1757 v
= apic_read(APIC_LVT0
);
1758 printk(KERN_DEBUG
"... APIC LVT0: %08x\n", v
);
1759 v
= apic_read(APIC_LVT1
);
1760 printk(KERN_DEBUG
"... APIC LVT1: %08x\n", v
);
1762 if (maxlvt
> 2) { /* ERR is LVT#3. */
1763 v
= apic_read(APIC_LVTERR
);
1764 printk(KERN_DEBUG
"... APIC LVTERR: %08x\n", v
);
1767 v
= apic_read(APIC_TMICT
);
1768 printk(KERN_DEBUG
"... APIC TMICT: %08x\n", v
);
1769 v
= apic_read(APIC_TMCCT
);
1770 printk(KERN_DEBUG
"... APIC TMCCT: %08x\n", v
);
1771 v
= apic_read(APIC_TDCR
);
1772 printk(KERN_DEBUG
"... APIC TDCR: %08x\n", v
);
1774 if (boot_cpu_has(X86_FEATURE_EXTAPIC
)) {
1775 v
= apic_read(APIC_EFEAT
);
1776 maxlvt
= (v
>> 16) & 0xff;
1777 printk(KERN_DEBUG
"... APIC EFEAT: %08x\n", v
);
1778 v
= apic_read(APIC_ECTRL
);
1779 printk(KERN_DEBUG
"... APIC ECTRL: %08x\n", v
);
1780 for (i
= 0; i
< maxlvt
; i
++) {
1781 v
= apic_read(APIC_EILVTn(i
));
1782 printk(KERN_DEBUG
"... APIC EILVT%d: %08x\n", i
, v
);
1788 __apicdebuginit(void) print_local_APICs(int maxcpu
)
1796 for_each_online_cpu(cpu
) {
1799 smp_call_function_single(cpu
, print_local_APIC
, NULL
, 1);
1804 __apicdebuginit(void) print_PIC(void)
1807 unsigned long flags
;
1809 if (!legacy_pic
->nr_legacy_irqs
)
1812 printk(KERN_DEBUG
"\nprinting PIC contents\n");
1814 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
1816 v
= inb(0xa1) << 8 | inb(0x21);
1817 printk(KERN_DEBUG
"... PIC IMR: %04x\n", v
);
1819 v
= inb(0xa0) << 8 | inb(0x20);
1820 printk(KERN_DEBUG
"... PIC IRR: %04x\n", v
);
1824 v
= inb(0xa0) << 8 | inb(0x20);
1828 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
1830 printk(KERN_DEBUG
"... PIC ISR: %04x\n", v
);
1832 v
= inb(0x4d1) << 8 | inb(0x4d0);
1833 printk(KERN_DEBUG
"... PIC ELCR: %04x\n", v
);
1836 static int __initdata show_lapic
= 1;
1837 static __init
int setup_show_lapic(char *arg
)
1841 if (strcmp(arg
, "all") == 0) {
1842 show_lapic
= CONFIG_NR_CPUS
;
1844 get_option(&arg
, &num
);
1851 __setup("show_lapic=", setup_show_lapic
);
1853 __apicdebuginit(int) print_ICs(void)
1855 if (apic_verbosity
== APIC_QUIET
)
1860 /* don't print out if apic is not there */
1861 if (!cpu_has_apic
&& !apic_from_smp_config())
1864 print_local_APICs(show_lapic
);
1870 late_initcall(print_ICs
);
1873 /* Where if anywhere is the i8259 connect in external int mode */
1874 static struct { int pin
, apic
; } ioapic_i8259
= { -1, -1 };
1876 void __init
enable_IO_APIC(void)
1878 int i8259_apic
, i8259_pin
;
1881 if (!legacy_pic
->nr_legacy_irqs
)
1884 for(apic
= 0; apic
< nr_ioapics
; apic
++) {
1886 /* See if any of the pins is in ExtINT mode */
1887 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++) {
1888 struct IO_APIC_route_entry entry
;
1889 entry
= ioapic_read_entry(apic
, pin
);
1891 /* If the interrupt line is enabled and in ExtInt mode
1892 * I have found the pin where the i8259 is connected.
1894 if ((entry
.mask
== 0) && (entry
.delivery_mode
== dest_ExtINT
)) {
1895 ioapic_i8259
.apic
= apic
;
1896 ioapic_i8259
.pin
= pin
;
1902 /* Look to see what if the MP table has reported the ExtINT */
1903 /* If we could not find the appropriate pin by looking at the ioapic
1904 * the i8259 probably is not connected the ioapic but give the
1905 * mptable a chance anyway.
1907 i8259_pin
= find_isa_irq_pin(0, mp_ExtINT
);
1908 i8259_apic
= find_isa_irq_apic(0, mp_ExtINT
);
1909 /* Trust the MP table if nothing is setup in the hardware */
1910 if ((ioapic_i8259
.pin
== -1) && (i8259_pin
>= 0)) {
1911 printk(KERN_WARNING
"ExtINT not setup in hardware but reported by MP table\n");
1912 ioapic_i8259
.pin
= i8259_pin
;
1913 ioapic_i8259
.apic
= i8259_apic
;
1915 /* Complain if the MP table and the hardware disagree */
1916 if (((ioapic_i8259
.apic
!= i8259_apic
) || (ioapic_i8259
.pin
!= i8259_pin
)) &&
1917 (i8259_pin
>= 0) && (ioapic_i8259
.pin
>= 0))
1919 printk(KERN_WARNING
"ExtINT in hardware and MP table differ\n");
1923 * Do not trust the IO-APIC being empty at bootup
1929 * Not an __init, needed by the reboot code
1931 void disable_IO_APIC(void)
1934 * Clear the IO-APIC before rebooting:
1938 if (!legacy_pic
->nr_legacy_irqs
)
1942 * If the i8259 is routed through an IOAPIC
1943 * Put that IOAPIC in virtual wire mode
1944 * so legacy interrupts can be delivered.
1946 * With interrupt-remapping, for now we will use virtual wire A mode,
1947 * as virtual wire B is little complex (need to configure both
1948 * IOAPIC RTE as well as interrupt-remapping table entry).
1949 * As this gets called during crash dump, keep this simple for now.
1951 if (ioapic_i8259
.pin
!= -1 && !irq_remapping_enabled
) {
1952 struct IO_APIC_route_entry entry
;
1954 memset(&entry
, 0, sizeof(entry
));
1955 entry
.mask
= 0; /* Enabled */
1956 entry
.trigger
= 0; /* Edge */
1958 entry
.polarity
= 0; /* High */
1959 entry
.delivery_status
= 0;
1960 entry
.dest_mode
= 0; /* Physical */
1961 entry
.delivery_mode
= dest_ExtINT
; /* ExtInt */
1963 entry
.dest
= read_apic_id();
1966 * Add it to the IO-APIC irq-routing table:
1968 ioapic_write_entry(ioapic_i8259
.apic
, ioapic_i8259
.pin
, entry
);
1972 * Use virtual wire A mode when interrupt remapping is enabled.
1974 if (cpu_has_apic
|| apic_from_smp_config())
1975 disconnect_bsp_APIC(!irq_remapping_enabled
&&
1976 ioapic_i8259
.pin
!= -1);
1979 #ifdef CONFIG_X86_32
1981 * function to set the IO-APIC physical IDs based on the
1982 * values stored in the MPC table.
1984 * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
1986 void __init
setup_ioapic_ids_from_mpc_nocheck(void)
1988 union IO_APIC_reg_00 reg_00
;
1989 physid_mask_t phys_id_present_map
;
1992 unsigned char old_id
;
1993 unsigned long flags
;
1996 * This is broken; anything with a real cpu count has to
1997 * circumvent this idiocy regardless.
1999 apic
->ioapic_phys_id_map(&phys_cpu_present_map
, &phys_id_present_map
);
2002 * Set the IOAPIC ID to the value stored in the MPC table.
2004 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++) {
2005 /* Read the register 0 value */
2006 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2007 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
2008 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2010 old_id
= mpc_ioapic_id(ioapic_idx
);
2012 if (mpc_ioapic_id(ioapic_idx
) >= get_physical_broadcast()) {
2013 printk(KERN_ERR
"BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
2014 ioapic_idx
, mpc_ioapic_id(ioapic_idx
));
2015 printk(KERN_ERR
"... fixing up to %d. (tell your hw vendor)\n",
2017 ioapics
[ioapic_idx
].mp_config
.apicid
= reg_00
.bits
.ID
;
2021 * Sanity check, is the ID really free? Every APIC in a
2022 * system must have a unique ID or we get lots of nice
2023 * 'stuck on smp_invalidate_needed IPI wait' messages.
2025 if (apic
->check_apicid_used(&phys_id_present_map
,
2026 mpc_ioapic_id(ioapic_idx
))) {
2027 printk(KERN_ERR
"BIOS bug, IO-APIC#%d ID %d is already used!...\n",
2028 ioapic_idx
, mpc_ioapic_id(ioapic_idx
));
2029 for (i
= 0; i
< get_physical_broadcast(); i
++)
2030 if (!physid_isset(i
, phys_id_present_map
))
2032 if (i
>= get_physical_broadcast())
2033 panic("Max APIC ID exceeded!\n");
2034 printk(KERN_ERR
"... fixing up to %d. (tell your hw vendor)\n",
2036 physid_set(i
, phys_id_present_map
);
2037 ioapics
[ioapic_idx
].mp_config
.apicid
= i
;
2040 apic
->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx
),
2042 apic_printk(APIC_VERBOSE
, "Setting %d in the "
2043 "phys_id_present_map\n",
2044 mpc_ioapic_id(ioapic_idx
));
2045 physids_or(phys_id_present_map
, phys_id_present_map
, tmp
);
2049 * We need to adjust the IRQ routing table
2050 * if the ID changed.
2052 if (old_id
!= mpc_ioapic_id(ioapic_idx
))
2053 for (i
= 0; i
< mp_irq_entries
; i
++)
2054 if (mp_irqs
[i
].dstapic
== old_id
)
2056 = mpc_ioapic_id(ioapic_idx
);
2059 * Update the ID register according to the right value
2060 * from the MPC table if they are different.
2062 if (mpc_ioapic_id(ioapic_idx
) == reg_00
.bits
.ID
)
2065 apic_printk(APIC_VERBOSE
, KERN_INFO
2066 "...changing IO-APIC physical APIC ID to %d ...",
2067 mpc_ioapic_id(ioapic_idx
));
2069 reg_00
.bits
.ID
= mpc_ioapic_id(ioapic_idx
);
2070 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2071 io_apic_write(ioapic_idx
, 0, reg_00
.raw
);
2072 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2077 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2078 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
2079 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2080 if (reg_00
.bits
.ID
!= mpc_ioapic_id(ioapic_idx
))
2081 pr_cont("could not set ID!\n");
2083 apic_printk(APIC_VERBOSE
, " ok.\n");
2087 void __init
setup_ioapic_ids_from_mpc(void)
2093 * Don't check I/O APIC IDs for xAPIC systems. They have
2094 * no meaning without the serial APIC bus.
2096 if (!(boot_cpu_data
.x86_vendor
== X86_VENDOR_INTEL
)
2097 || APIC_XAPIC(apic_version
[boot_cpu_physical_apicid
]))
2099 setup_ioapic_ids_from_mpc_nocheck();
2103 int no_timer_check __initdata
;
2105 static int __init
notimercheck(char *s
)
2110 __setup("no_timer_check", notimercheck
);
2113 * There is a nasty bug in some older SMP boards, their mptable lies
2114 * about the timer IRQ. We do the following to work around the situation:
2116 * - timer IRQ defaults to IO-APIC IRQ
2117 * - if this function detects that timer IRQs are defunct, then we fall
2118 * back to ISA timer IRQs
2120 static int __init
timer_irq_works(void)
2122 unsigned long t1
= jiffies
;
2123 unsigned long flags
;
2128 local_save_flags(flags
);
2130 /* Let ten ticks pass... */
2131 mdelay((10 * 1000) / HZ
);
2132 local_irq_restore(flags
);
2135 * Expect a few ticks at least, to be sure some possible
2136 * glue logic does not lock up after one or two first
2137 * ticks in a non-ExtINT mode. Also the local APIC
2138 * might have cached one ExtINT interrupt. Finally, at
2139 * least one tick may be lost due to delays.
2143 if (time_after(jiffies
, t1
+ 4))
2149 * In the SMP+IOAPIC case it might happen that there are an unspecified
2150 * number of pending IRQ events unhandled. These cases are very rare,
2151 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
2152 * better to do it this way as thus we do not have to be aware of
2153 * 'pending' interrupts in the IRQ path, except at this point.
2156 * Edge triggered needs to resend any interrupt
2157 * that was delayed but this is now handled in the device
2162 * Starting up a edge-triggered IO-APIC interrupt is
2163 * nasty - we need to make sure that we get the edge.
2164 * If it is already asserted for some reason, we need
2165 * return 1 to indicate that is was pending.
2167 * This is not complete - we should be able to fake
2168 * an edge even if it isn't on the 8259A...
2171 static unsigned int startup_ioapic_irq(struct irq_data
*data
)
2173 int was_pending
= 0, irq
= data
->irq
;
2174 unsigned long flags
;
2176 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2177 if (irq
< legacy_pic
->nr_legacy_irqs
) {
2178 legacy_pic
->mask(irq
);
2179 if (legacy_pic
->irq_pending(irq
))
2182 __unmask_ioapic(data
->chip_data
);
2183 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2188 static int ioapic_retrigger_irq(struct irq_data
*data
)
2190 struct irq_cfg
*cfg
= data
->chip_data
;
2191 unsigned long flags
;
2193 raw_spin_lock_irqsave(&vector_lock
, flags
);
2194 apic
->send_IPI_mask(cpumask_of(cpumask_first(cfg
->domain
)), cfg
->vector
);
2195 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
2201 * Level and edge triggered IO-APIC interrupts need different handling,
2202 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
2203 * handled with the level-triggered descriptor, but that one has slightly
2204 * more overhead. Level-triggered interrupts cannot be handled with the
2205 * edge-triggered handler, without risking IRQ storms and other ugly
2210 void send_cleanup_vector(struct irq_cfg
*cfg
)
2212 cpumask_var_t cleanup_mask
;
2214 if (unlikely(!alloc_cpumask_var(&cleanup_mask
, GFP_ATOMIC
))) {
2216 for_each_cpu_and(i
, cfg
->old_domain
, cpu_online_mask
)
2217 apic
->send_IPI_mask(cpumask_of(i
), IRQ_MOVE_CLEANUP_VECTOR
);
2219 cpumask_and(cleanup_mask
, cfg
->old_domain
, cpu_online_mask
);
2220 apic
->send_IPI_mask(cleanup_mask
, IRQ_MOVE_CLEANUP_VECTOR
);
2221 free_cpumask_var(cleanup_mask
);
2223 cfg
->move_in_progress
= 0;
2226 asmlinkage
void smp_irq_move_cleanup_interrupt(void)
2228 unsigned vector
, me
;
2234 me
= smp_processor_id();
2235 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
; vector
++) {
2238 struct irq_desc
*desc
;
2239 struct irq_cfg
*cfg
;
2240 irq
= __this_cpu_read(vector_irq
[vector
]);
2245 desc
= irq_to_desc(irq
);
2250 raw_spin_lock(&desc
->lock
);
2253 * Check if the irq migration is in progress. If so, we
2254 * haven't received the cleanup request yet for this irq.
2256 if (cfg
->move_in_progress
)
2259 if (vector
== cfg
->vector
&& cpumask_test_cpu(me
, cfg
->domain
))
2262 irr
= apic_read(APIC_IRR
+ (vector
/ 32 * 0x10));
2264 * Check if the vector that needs to be cleanedup is
2265 * registered at the cpu's IRR. If so, then this is not
2266 * the best time to clean it up. Lets clean it up in the
2267 * next attempt by sending another IRQ_MOVE_CLEANUP_VECTOR
2270 if (irr
& (1 << (vector
% 32))) {
2271 apic
->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR
);
2274 __this_cpu_write(vector_irq
[vector
], -1);
2276 raw_spin_unlock(&desc
->lock
);
2282 static void __irq_complete_move(struct irq_cfg
*cfg
, unsigned vector
)
2286 if (likely(!cfg
->move_in_progress
))
2289 me
= smp_processor_id();
2291 if (vector
== cfg
->vector
&& cpumask_test_cpu(me
, cfg
->domain
))
2292 send_cleanup_vector(cfg
);
2295 static void irq_complete_move(struct irq_cfg
*cfg
)
2297 __irq_complete_move(cfg
, ~get_irq_regs()->orig_ax
);
2300 void irq_force_complete_move(int irq
)
2302 struct irq_cfg
*cfg
= irq_get_chip_data(irq
);
2307 __irq_complete_move(cfg
, cfg
->vector
);
2310 static inline void irq_complete_move(struct irq_cfg
*cfg
) { }
2313 static void __target_IO_APIC_irq(unsigned int irq
, unsigned int dest
, struct irq_cfg
*cfg
)
2316 struct irq_pin_list
*entry
;
2317 u8 vector
= cfg
->vector
;
2319 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
2325 * With interrupt-remapping, destination information comes
2326 * from interrupt-remapping table entry.
2328 if (!irq_remapped(cfg
))
2329 io_apic_write(apic
, 0x11 + pin
*2, dest
);
2330 reg
= io_apic_read(apic
, 0x10 + pin
*2);
2331 reg
&= ~IO_APIC_REDIR_VECTOR_MASK
;
2333 io_apic_modify(apic
, 0x10 + pin
*2, reg
);
2338 * Either sets data->affinity to a valid value, and returns
2339 * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and
2340 * leaves data->affinity untouched.
2342 int __ioapic_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
2343 unsigned int *dest_id
)
2345 struct irq_cfg
*cfg
= data
->chip_data
;
2346 unsigned int irq
= data
->irq
;
2349 if (!config_enabled(CONFIG_SMP
))
2352 if (!cpumask_intersects(mask
, cpu_online_mask
))
2355 err
= assign_irq_vector(irq
, cfg
, mask
);
2359 err
= apic
->cpu_mask_to_apicid_and(mask
, cfg
->domain
, dest_id
);
2361 if (assign_irq_vector(irq
, cfg
, data
->affinity
))
2362 pr_err("Failed to recover vector for irq %d\n", irq
);
2366 cpumask_copy(data
->affinity
, mask
);
2372 ioapic_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
2375 unsigned int dest
, irq
= data
->irq
;
2376 unsigned long flags
;
2379 if (!config_enabled(CONFIG_SMP
))
2382 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2383 ret
= __ioapic_set_affinity(data
, mask
, &dest
);
2385 /* Only the high 8 bits are valid. */
2386 dest
= SET_APIC_LOGICAL_ID(dest
);
2387 __target_IO_APIC_irq(irq
, dest
, data
->chip_data
);
2388 ret
= IRQ_SET_MASK_OK_NOCOPY
;
2390 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2394 static void ack_apic_edge(struct irq_data
*data
)
2396 irq_complete_move(data
->chip_data
);
2401 atomic_t irq_mis_count
;
2403 #ifdef CONFIG_GENERIC_PENDING_IRQ
2404 static bool io_apic_level_ack_pending(struct irq_cfg
*cfg
)
2406 struct irq_pin_list
*entry
;
2407 unsigned long flags
;
2409 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2410 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
2415 reg
= io_apic_read(entry
->apic
, 0x10 + pin
*2);
2416 /* Is the remote IRR bit set? */
2417 if (reg
& IO_APIC_REDIR_REMOTE_IRR
) {
2418 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2422 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2427 static inline bool ioapic_irqd_mask(struct irq_data
*data
, struct irq_cfg
*cfg
)
2429 /* If we are moving the irq we need to mask it */
2430 if (unlikely(irqd_is_setaffinity_pending(data
))) {
2437 static inline void ioapic_irqd_unmask(struct irq_data
*data
,
2438 struct irq_cfg
*cfg
, bool masked
)
2440 if (unlikely(masked
)) {
2441 /* Only migrate the irq if the ack has been received.
2443 * On rare occasions the broadcast level triggered ack gets
2444 * delayed going to ioapics, and if we reprogram the
2445 * vector while Remote IRR is still set the irq will never
2448 * To prevent this scenario we read the Remote IRR bit
2449 * of the ioapic. This has two effects.
2450 * - On any sane system the read of the ioapic will
2451 * flush writes (and acks) going to the ioapic from
2453 * - We get to see if the ACK has actually been delivered.
2455 * Based on failed experiments of reprogramming the
2456 * ioapic entry from outside of irq context starting
2457 * with masking the ioapic entry and then polling until
2458 * Remote IRR was clear before reprogramming the
2459 * ioapic I don't trust the Remote IRR bit to be
2460 * completey accurate.
2462 * However there appears to be no other way to plug
2463 * this race, so if the Remote IRR bit is not
2464 * accurate and is causing problems then it is a hardware bug
2465 * and you can go talk to the chipset vendor about it.
2467 if (!io_apic_level_ack_pending(cfg
))
2468 irq_move_masked_irq(data
);
2473 static inline bool ioapic_irqd_mask(struct irq_data
*data
, struct irq_cfg
*cfg
)
2477 static inline void ioapic_irqd_unmask(struct irq_data
*data
,
2478 struct irq_cfg
*cfg
, bool masked
)
2483 static void ack_apic_level(struct irq_data
*data
)
2485 struct irq_cfg
*cfg
= data
->chip_data
;
2486 int i
, irq
= data
->irq
;
2490 irq_complete_move(cfg
);
2491 masked
= ioapic_irqd_mask(data
, cfg
);
2494 * It appears there is an erratum which affects at least version 0x11
2495 * of I/O APIC (that's the 82093AA and cores integrated into various
2496 * chipsets). Under certain conditions a level-triggered interrupt is
2497 * erroneously delivered as edge-triggered one but the respective IRR
2498 * bit gets set nevertheless. As a result the I/O unit expects an EOI
2499 * message but it will never arrive and further interrupts are blocked
2500 * from the source. The exact reason is so far unknown, but the
2501 * phenomenon was observed when two consecutive interrupt requests
2502 * from a given source get delivered to the same CPU and the source is
2503 * temporarily disabled in between.
2505 * A workaround is to simulate an EOI message manually. We achieve it
2506 * by setting the trigger mode to edge and then to level when the edge
2507 * trigger mode gets detected in the TMR of a local APIC for a
2508 * level-triggered interrupt. We mask the source for the time of the
2509 * operation to prevent an edge-triggered interrupt escaping meanwhile.
2510 * The idea is from Manfred Spraul. --macro
2512 * Also in the case when cpu goes offline, fixup_irqs() will forward
2513 * any unhandled interrupt on the offlined cpu to the new cpu
2514 * destination that is handling the corresponding interrupt. This
2515 * interrupt forwarding is done via IPI's. Hence, in this case also
2516 * level-triggered io-apic interrupt will be seen as an edge
2517 * interrupt in the IRR. And we can't rely on the cpu's EOI
2518 * to be broadcasted to the IO-APIC's which will clear the remoteIRR
2519 * corresponding to the level-triggered interrupt. Hence on IO-APIC's
2520 * supporting EOI register, we do an explicit EOI to clear the
2521 * remote IRR and on IO-APIC's which don't have an EOI register,
2522 * we use the above logic (mask+edge followed by unmask+level) from
2523 * Manfred Spraul to clear the remote IRR.
2526 v
= apic_read(APIC_TMR
+ ((i
& ~0x1f) >> 1));
2529 * We must acknowledge the irq before we move it or the acknowledge will
2530 * not propagate properly.
2535 * Tail end of clearing remote IRR bit (either by delivering the EOI
2536 * message via io-apic EOI register write or simulating it using
2537 * mask+edge followed by unnask+level logic) manually when the
2538 * level triggered interrupt is seen as the edge triggered interrupt
2541 if (!(v
& (1 << (i
& 0x1f)))) {
2542 atomic_inc(&irq_mis_count
);
2544 eoi_ioapic_irq(irq
, cfg
);
2547 ioapic_irqd_unmask(data
, cfg
, masked
);
2550 #ifdef CONFIG_IRQ_REMAP
2551 static void ir_ack_apic_edge(struct irq_data
*data
)
2556 static void ir_ack_apic_level(struct irq_data
*data
)
2559 eoi_ioapic_irq(data
->irq
, data
->chip_data
);
2562 static void ir_print_prefix(struct irq_data
*data
, struct seq_file
*p
)
2564 seq_printf(p
, " IR-%s", data
->chip
->name
);
2567 static void irq_remap_modify_chip_defaults(struct irq_chip
*chip
)
2569 chip
->irq_print_chip
= ir_print_prefix
;
2570 chip
->irq_ack
= ir_ack_apic_edge
;
2571 chip
->irq_eoi
= ir_ack_apic_level
;
2573 chip
->irq_set_affinity
= set_remapped_irq_affinity
;
2575 #endif /* CONFIG_IRQ_REMAP */
2577 static struct irq_chip ioapic_chip __read_mostly
= {
2579 .irq_startup
= startup_ioapic_irq
,
2580 .irq_mask
= mask_ioapic_irq
,
2581 .irq_unmask
= unmask_ioapic_irq
,
2582 .irq_ack
= ack_apic_edge
,
2583 .irq_eoi
= ack_apic_level
,
2584 .irq_set_affinity
= ioapic_set_affinity
,
2585 .irq_retrigger
= ioapic_retrigger_irq
,
2588 static inline void init_IO_APIC_traps(void)
2590 struct irq_cfg
*cfg
;
2594 * NOTE! The local APIC isn't very good at handling
2595 * multiple interrupts at the same interrupt level.
2596 * As the interrupt level is determined by taking the
2597 * vector number and shifting that right by 4, we
2598 * want to spread these out a bit so that they don't
2599 * all fall in the same interrupt level.
2601 * Also, we've got to be careful not to trash gate
2602 * 0x80, because int 0x80 is hm, kind of importantish. ;)
2604 for_each_active_irq(irq
) {
2605 cfg
= irq_get_chip_data(irq
);
2606 if (IO_APIC_IRQ(irq
) && cfg
&& !cfg
->vector
) {
2608 * Hmm.. We don't have an entry for this,
2609 * so default to an old-fashioned 8259
2610 * interrupt if we can..
2612 if (irq
< legacy_pic
->nr_legacy_irqs
)
2613 legacy_pic
->make_irq(irq
);
2615 /* Strange. Oh, well.. */
2616 irq_set_chip(irq
, &no_irq_chip
);
2622 * The local APIC irq-chip implementation:
2625 static void mask_lapic_irq(struct irq_data
*data
)
2629 v
= apic_read(APIC_LVT0
);
2630 apic_write(APIC_LVT0
, v
| APIC_LVT_MASKED
);
2633 static void unmask_lapic_irq(struct irq_data
*data
)
2637 v
= apic_read(APIC_LVT0
);
2638 apic_write(APIC_LVT0
, v
& ~APIC_LVT_MASKED
);
2641 static void ack_lapic_irq(struct irq_data
*data
)
2646 static struct irq_chip lapic_chip __read_mostly
= {
2647 .name
= "local-APIC",
2648 .irq_mask
= mask_lapic_irq
,
2649 .irq_unmask
= unmask_lapic_irq
,
2650 .irq_ack
= ack_lapic_irq
,
2653 static void lapic_register_intr(int irq
)
2655 irq_clear_status_flags(irq
, IRQ_LEVEL
);
2656 irq_set_chip_and_handler_name(irq
, &lapic_chip
, handle_edge_irq
,
2661 * This looks a bit hackish but it's about the only one way of sending
2662 * a few INTA cycles to 8259As and any associated glue logic. ICR does
2663 * not support the ExtINT mode, unfortunately. We need to send these
2664 * cycles as some i82489DX-based boards have glue logic that keeps the
2665 * 8259A interrupt line asserted until INTA. --macro
2667 static inline void __init
unlock_ExtINT_logic(void)
2670 struct IO_APIC_route_entry entry0
, entry1
;
2671 unsigned char save_control
, save_freq_select
;
2673 pin
= find_isa_irq_pin(8, mp_INT
);
2678 apic
= find_isa_irq_apic(8, mp_INT
);
2684 entry0
= ioapic_read_entry(apic
, pin
);
2685 clear_IO_APIC_pin(apic
, pin
);
2687 memset(&entry1
, 0, sizeof(entry1
));
2689 entry1
.dest_mode
= 0; /* physical delivery */
2690 entry1
.mask
= 0; /* unmask IRQ now */
2691 entry1
.dest
= hard_smp_processor_id();
2692 entry1
.delivery_mode
= dest_ExtINT
;
2693 entry1
.polarity
= entry0
.polarity
;
2697 ioapic_write_entry(apic
, pin
, entry1
);
2699 save_control
= CMOS_READ(RTC_CONTROL
);
2700 save_freq_select
= CMOS_READ(RTC_FREQ_SELECT
);
2701 CMOS_WRITE((save_freq_select
& ~RTC_RATE_SELECT
) | 0x6,
2703 CMOS_WRITE(save_control
| RTC_PIE
, RTC_CONTROL
);
2708 if ((CMOS_READ(RTC_INTR_FLAGS
) & RTC_PF
) == RTC_PF
)
2712 CMOS_WRITE(save_control
, RTC_CONTROL
);
2713 CMOS_WRITE(save_freq_select
, RTC_FREQ_SELECT
);
2714 clear_IO_APIC_pin(apic
, pin
);
2716 ioapic_write_entry(apic
, pin
, entry0
);
2719 static int disable_timer_pin_1 __initdata
;
2720 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
2721 static int __init
disable_timer_pin_setup(char *arg
)
2723 disable_timer_pin_1
= 1;
2726 early_param("disable_timer_pin_1", disable_timer_pin_setup
);
2728 int timer_through_8259 __initdata
;
2731 * This code may look a bit paranoid, but it's supposed to cooperate with
2732 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
2733 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
2734 * fanatically on his truly buggy board.
2736 * FIXME: really need to revamp this for all platforms.
2738 static inline void __init
check_timer(void)
2740 struct irq_cfg
*cfg
= irq_get_chip_data(0);
2741 int node
= cpu_to_node(0);
2742 int apic1
, pin1
, apic2
, pin2
;
2743 unsigned long flags
;
2746 local_irq_save(flags
);
2749 * get/set the timer IRQ vector:
2751 legacy_pic
->mask(0);
2752 assign_irq_vector(0, cfg
, apic
->target_cpus());
2755 * As IRQ0 is to be enabled in the 8259A, the virtual
2756 * wire has to be disabled in the local APIC. Also
2757 * timer interrupts need to be acknowledged manually in
2758 * the 8259A for the i82489DX when using the NMI
2759 * watchdog as that APIC treats NMIs as level-triggered.
2760 * The AEOI mode will finish them in the 8259A
2763 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_EXTINT
);
2764 legacy_pic
->init(1);
2766 pin1
= find_isa_irq_pin(0, mp_INT
);
2767 apic1
= find_isa_irq_apic(0, mp_INT
);
2768 pin2
= ioapic_i8259
.pin
;
2769 apic2
= ioapic_i8259
.apic
;
2771 apic_printk(APIC_QUIET
, KERN_INFO
"..TIMER: vector=0x%02X "
2772 "apic1=%d pin1=%d apic2=%d pin2=%d\n",
2773 cfg
->vector
, apic1
, pin1
, apic2
, pin2
);
2776 * Some BIOS writers are clueless and report the ExtINTA
2777 * I/O APIC input from the cascaded 8259A as the timer
2778 * interrupt input. So just in case, if only one pin
2779 * was found above, try it both directly and through the
2783 if (irq_remapping_enabled
)
2784 panic("BIOS bug: timer not connected to IO-APIC");
2788 } else if (pin2
== -1) {
2795 * Ok, does IRQ0 through the IOAPIC work?
2798 add_pin_to_irq_node(cfg
, node
, apic1
, pin1
);
2799 setup_timer_IRQ0_pin(apic1
, pin1
, cfg
->vector
);
2801 /* for edge trigger, setup_ioapic_irq already
2802 * leave it unmasked.
2803 * so only need to unmask if it is level-trigger
2804 * do we really have level trigger timer?
2807 idx
= find_irq_entry(apic1
, pin1
, mp_INT
);
2808 if (idx
!= -1 && irq_trigger(idx
))
2811 if (timer_irq_works()) {
2812 if (disable_timer_pin_1
> 0)
2813 clear_IO_APIC_pin(0, pin1
);
2816 if (irq_remapping_enabled
)
2817 panic("timer doesn't work through Interrupt-remapped IO-APIC");
2818 local_irq_disable();
2819 clear_IO_APIC_pin(apic1
, pin1
);
2821 apic_printk(APIC_QUIET
, KERN_ERR
"..MP-BIOS bug: "
2822 "8254 timer not connected to IO-APIC\n");
2824 apic_printk(APIC_QUIET
, KERN_INFO
"...trying to set up timer "
2825 "(IRQ0) through the 8259A ...\n");
2826 apic_printk(APIC_QUIET
, KERN_INFO
2827 "..... (found apic %d pin %d) ...\n", apic2
, pin2
);
2829 * legacy devices should be connected to IO APIC #0
2831 replace_pin_at_irq_node(cfg
, node
, apic1
, pin1
, apic2
, pin2
);
2832 setup_timer_IRQ0_pin(apic2
, pin2
, cfg
->vector
);
2833 legacy_pic
->unmask(0);
2834 if (timer_irq_works()) {
2835 apic_printk(APIC_QUIET
, KERN_INFO
"....... works.\n");
2836 timer_through_8259
= 1;
2840 * Cleanup, just in case ...
2842 local_irq_disable();
2843 legacy_pic
->mask(0);
2844 clear_IO_APIC_pin(apic2
, pin2
);
2845 apic_printk(APIC_QUIET
, KERN_INFO
"....... failed.\n");
2848 apic_printk(APIC_QUIET
, KERN_INFO
2849 "...trying to set up timer as Virtual Wire IRQ...\n");
2851 lapic_register_intr(0);
2852 apic_write(APIC_LVT0
, APIC_DM_FIXED
| cfg
->vector
); /* Fixed mode */
2853 legacy_pic
->unmask(0);
2855 if (timer_irq_works()) {
2856 apic_printk(APIC_QUIET
, KERN_INFO
"..... works.\n");
2859 local_irq_disable();
2860 legacy_pic
->mask(0);
2861 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_FIXED
| cfg
->vector
);
2862 apic_printk(APIC_QUIET
, KERN_INFO
"..... failed.\n");
2864 apic_printk(APIC_QUIET
, KERN_INFO
2865 "...trying to set up timer as ExtINT IRQ...\n");
2867 legacy_pic
->init(0);
2868 legacy_pic
->make_irq(0);
2869 apic_write(APIC_LVT0
, APIC_DM_EXTINT
);
2871 unlock_ExtINT_logic();
2873 if (timer_irq_works()) {
2874 apic_printk(APIC_QUIET
, KERN_INFO
"..... works.\n");
2877 local_irq_disable();
2878 apic_printk(APIC_QUIET
, KERN_INFO
"..... failed :(.\n");
2879 if (x2apic_preenabled
)
2880 apic_printk(APIC_QUIET
, KERN_INFO
2881 "Perhaps problem with the pre-enabled x2apic mode\n"
2882 "Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
2883 panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
2884 "report. Then try booting with the 'noapic' option.\n");
2886 local_irq_restore(flags
);
2890 * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
2891 * to devices. However there may be an I/O APIC pin available for
2892 * this interrupt regardless. The pin may be left unconnected, but
2893 * typically it will be reused as an ExtINT cascade interrupt for
2894 * the master 8259A. In the MPS case such a pin will normally be
2895 * reported as an ExtINT interrupt in the MP table. With ACPI
2896 * there is no provision for ExtINT interrupts, and in the absence
2897 * of an override it would be treated as an ordinary ISA I/O APIC
2898 * interrupt, that is edge-triggered and unmasked by default. We
2899 * used to do this, but it caused problems on some systems because
2900 * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
2901 * the same ExtINT cascade interrupt to drive the local APIC of the
2902 * bootstrap processor. Therefore we refrain from routing IRQ2 to
2903 * the I/O APIC in all cases now. No actual device should request
2904 * it anyway. --macro
2906 #define PIC_IRQS (1UL << PIC_CASCADE_IR)
2908 void __init
setup_IO_APIC(void)
2912 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
2914 io_apic_irqs
= legacy_pic
->nr_legacy_irqs
? ~PIC_IRQS
: ~0UL;
2916 apic_printk(APIC_VERBOSE
, "ENABLING IO-APIC IRQs\n");
2918 * Set up IO-APIC IRQ routing.
2920 x86_init
.mpparse
.setup_ioapic_ids();
2923 setup_IO_APIC_irqs();
2924 init_IO_APIC_traps();
2925 if (legacy_pic
->nr_legacy_irqs
)
2930 * Called after all the initialization is done. If we didn't find any
2931 * APIC bugs then we can allow the modify fast path
2934 static int __init
io_apic_bug_finalize(void)
2936 if (sis_apic_bug
== -1)
2941 late_initcall(io_apic_bug_finalize
);
2943 static void resume_ioapic_id(int ioapic_idx
)
2945 unsigned long flags
;
2946 union IO_APIC_reg_00 reg_00
;
2948 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2949 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
2950 if (reg_00
.bits
.ID
!= mpc_ioapic_id(ioapic_idx
)) {
2951 reg_00
.bits
.ID
= mpc_ioapic_id(ioapic_idx
);
2952 io_apic_write(ioapic_idx
, 0, reg_00
.raw
);
2954 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2957 static void ioapic_resume(void)
2961 for (ioapic_idx
= nr_ioapics
- 1; ioapic_idx
>= 0; ioapic_idx
--)
2962 resume_ioapic_id(ioapic_idx
);
2964 restore_ioapic_entries();
2967 static struct syscore_ops ioapic_syscore_ops
= {
2968 .suspend
= save_ioapic_entries
,
2969 .resume
= ioapic_resume
,
2972 static int __init
ioapic_init_ops(void)
2974 register_syscore_ops(&ioapic_syscore_ops
);
2979 device_initcall(ioapic_init_ops
);
2982 * Dynamic irq allocate and deallocation
2984 unsigned int create_irq_nr(unsigned int from
, int node
)
2986 struct irq_cfg
*cfg
;
2987 unsigned long flags
;
2988 unsigned int ret
= 0;
2991 if (from
< nr_irqs_gsi
)
2994 irq
= alloc_irq_from(from
, node
);
2997 cfg
= alloc_irq_cfg(irq
, node
);
2999 free_irq_at(irq
, NULL
);
3003 raw_spin_lock_irqsave(&vector_lock
, flags
);
3004 if (!__assign_irq_vector(irq
, cfg
, apic
->target_cpus()))
3006 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
3009 irq_set_chip_data(irq
, cfg
);
3010 irq_clear_status_flags(irq
, IRQ_NOREQUEST
);
3012 free_irq_at(irq
, cfg
);
3017 int create_irq(void)
3019 int node
= cpu_to_node(0);
3020 unsigned int irq_want
;
3023 irq_want
= nr_irqs_gsi
;
3024 irq
= create_irq_nr(irq_want
, node
);
3032 void destroy_irq(unsigned int irq
)
3034 struct irq_cfg
*cfg
= irq_get_chip_data(irq
);
3035 unsigned long flags
;
3037 irq_set_status_flags(irq
, IRQ_NOREQUEST
|IRQ_NOPROBE
);
3039 if (irq_remapped(cfg
))
3040 free_remapped_irq(irq
);
3041 raw_spin_lock_irqsave(&vector_lock
, flags
);
3042 __clear_irq_vector(irq
, cfg
);
3043 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
3044 free_irq_at(irq
, cfg
);
3048 * MSI message composition
3050 #ifdef CONFIG_PCI_MSI
3051 static int msi_compose_msg(struct pci_dev
*pdev
, unsigned int irq
,
3052 struct msi_msg
*msg
, u8 hpet_id
)
3054 struct irq_cfg
*cfg
;
3062 err
= assign_irq_vector(irq
, cfg
, apic
->target_cpus());
3066 err
= apic
->cpu_mask_to_apicid_and(cfg
->domain
,
3067 apic
->target_cpus(), &dest
);
3071 if (irq_remapped(cfg
)) {
3072 compose_remapped_msi_msg(pdev
, irq
, dest
, msg
, hpet_id
);
3076 if (x2apic_enabled())
3077 msg
->address_hi
= MSI_ADDR_BASE_HI
|
3078 MSI_ADDR_EXT_DEST_ID(dest
);
3080 msg
->address_hi
= MSI_ADDR_BASE_HI
;
3084 ((apic
->irq_dest_mode
== 0) ?
3085 MSI_ADDR_DEST_MODE_PHYSICAL
:
3086 MSI_ADDR_DEST_MODE_LOGICAL
) |
3087 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3088 MSI_ADDR_REDIRECTION_CPU
:
3089 MSI_ADDR_REDIRECTION_LOWPRI
) |
3090 MSI_ADDR_DEST_ID(dest
);
3093 MSI_DATA_TRIGGER_EDGE
|
3094 MSI_DATA_LEVEL_ASSERT
|
3095 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3096 MSI_DATA_DELIVERY_FIXED
:
3097 MSI_DATA_DELIVERY_LOWPRI
) |
3098 MSI_DATA_VECTOR(cfg
->vector
);
3104 msi_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
, bool force
)
3106 struct irq_cfg
*cfg
= data
->chip_data
;
3110 if (__ioapic_set_affinity(data
, mask
, &dest
))
3113 __get_cached_msi_msg(data
->msi_desc
, &msg
);
3115 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3116 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3117 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3118 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3120 __write_msi_msg(data
->msi_desc
, &msg
);
3122 return IRQ_SET_MASK_OK_NOCOPY
;
3126 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
3127 * which implement the MSI or MSI-X Capability Structure.
3129 static struct irq_chip msi_chip
= {
3131 .irq_unmask
= unmask_msi_irq
,
3132 .irq_mask
= mask_msi_irq
,
3133 .irq_ack
= ack_apic_edge
,
3134 .irq_set_affinity
= msi_set_affinity
,
3135 .irq_retrigger
= ioapic_retrigger_irq
,
3138 static int setup_msi_irq(struct pci_dev
*dev
, struct msi_desc
*msidesc
, int irq
)
3140 struct irq_chip
*chip
= &msi_chip
;
3144 ret
= msi_compose_msg(dev
, irq
, &msg
, -1);
3148 irq_set_msi_desc(irq
, msidesc
);
3149 write_msi_msg(irq
, &msg
);
3151 if (irq_remapped(irq_get_chip_data(irq
))) {
3152 irq_set_status_flags(irq
, IRQ_MOVE_PCNTXT
);
3153 irq_remap_modify_chip_defaults(chip
);
3156 irq_set_chip_and_handler_name(irq
, chip
, handle_edge_irq
, "edge");
3158 dev_printk(KERN_DEBUG
, &dev
->dev
, "irq %d for MSI/MSI-X\n", irq
);
3163 int native_setup_msi_irqs(struct pci_dev
*dev
, int nvec
, int type
)
3165 int node
, ret
, sub_handle
, index
= 0;
3166 unsigned int irq
, irq_want
;
3167 struct msi_desc
*msidesc
;
3169 /* x86 doesn't support multiple MSI yet */
3170 if (type
== PCI_CAP_ID_MSI
&& nvec
> 1)
3173 node
= dev_to_node(&dev
->dev
);
3174 irq_want
= nr_irqs_gsi
;
3176 list_for_each_entry(msidesc
, &dev
->msi_list
, list
) {
3177 irq
= create_irq_nr(irq_want
, node
);
3181 if (!irq_remapping_enabled
)
3186 * allocate the consecutive block of IRTE's
3189 index
= msi_alloc_remapped_irq(dev
, irq
, nvec
);
3195 ret
= msi_setup_remapped_irq(dev
, irq
, index
,
3201 ret
= setup_msi_irq(dev
, msidesc
, irq
);
3213 void native_teardown_msi_irq(unsigned int irq
)
3218 #ifdef CONFIG_DMAR_TABLE
3220 dmar_msi_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
3223 struct irq_cfg
*cfg
= data
->chip_data
;
3224 unsigned int dest
, irq
= data
->irq
;
3227 if (__ioapic_set_affinity(data
, mask
, &dest
))
3230 dmar_msi_read(irq
, &msg
);
3232 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3233 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3234 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3235 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3236 msg
.address_hi
= MSI_ADDR_BASE_HI
| MSI_ADDR_EXT_DEST_ID(dest
);
3238 dmar_msi_write(irq
, &msg
);
3240 return IRQ_SET_MASK_OK_NOCOPY
;
3243 static struct irq_chip dmar_msi_type
= {
3245 .irq_unmask
= dmar_msi_unmask
,
3246 .irq_mask
= dmar_msi_mask
,
3247 .irq_ack
= ack_apic_edge
,
3248 .irq_set_affinity
= dmar_msi_set_affinity
,
3249 .irq_retrigger
= ioapic_retrigger_irq
,
3252 int arch_setup_dmar_msi(unsigned int irq
)
3257 ret
= msi_compose_msg(NULL
, irq
, &msg
, -1);
3260 dmar_msi_write(irq
, &msg
);
3261 irq_set_chip_and_handler_name(irq
, &dmar_msi_type
, handle_edge_irq
,
3267 #ifdef CONFIG_HPET_TIMER
3269 static int hpet_msi_set_affinity(struct irq_data
*data
,
3270 const struct cpumask
*mask
, bool force
)
3272 struct irq_cfg
*cfg
= data
->chip_data
;
3276 if (__ioapic_set_affinity(data
, mask
, &dest
))
3279 hpet_msi_read(data
->handler_data
, &msg
);
3281 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3282 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3283 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3284 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3286 hpet_msi_write(data
->handler_data
, &msg
);
3288 return IRQ_SET_MASK_OK_NOCOPY
;
3291 static struct irq_chip hpet_msi_type
= {
3293 .irq_unmask
= hpet_msi_unmask
,
3294 .irq_mask
= hpet_msi_mask
,
3295 .irq_ack
= ack_apic_edge
,
3296 .irq_set_affinity
= hpet_msi_set_affinity
,
3297 .irq_retrigger
= ioapic_retrigger_irq
,
3300 int arch_setup_hpet_msi(unsigned int irq
, unsigned int id
)
3302 struct irq_chip
*chip
= &hpet_msi_type
;
3306 if (irq_remapping_enabled
) {
3307 if (!setup_hpet_msi_remapped(irq
, id
))
3311 ret
= msi_compose_msg(NULL
, irq
, &msg
, id
);
3315 hpet_msi_write(irq_get_handler_data(irq
), &msg
);
3316 irq_set_status_flags(irq
, IRQ_MOVE_PCNTXT
);
3317 if (irq_remapped(irq_get_chip_data(irq
)))
3318 irq_remap_modify_chip_defaults(chip
);
3320 irq_set_chip_and_handler_name(irq
, chip
, handle_edge_irq
, "edge");
3325 #endif /* CONFIG_PCI_MSI */
3327 * Hypertransport interrupt support
3329 #ifdef CONFIG_HT_IRQ
3331 static void target_ht_irq(unsigned int irq
, unsigned int dest
, u8 vector
)
3333 struct ht_irq_msg msg
;
3334 fetch_ht_irq_msg(irq
, &msg
);
3336 msg
.address_lo
&= ~(HT_IRQ_LOW_VECTOR_MASK
| HT_IRQ_LOW_DEST_ID_MASK
);
3337 msg
.address_hi
&= ~(HT_IRQ_HIGH_DEST_ID_MASK
);
3339 msg
.address_lo
|= HT_IRQ_LOW_VECTOR(vector
) | HT_IRQ_LOW_DEST_ID(dest
);
3340 msg
.address_hi
|= HT_IRQ_HIGH_DEST_ID(dest
);
3342 write_ht_irq_msg(irq
, &msg
);
3346 ht_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
, bool force
)
3348 struct irq_cfg
*cfg
= data
->chip_data
;
3351 if (__ioapic_set_affinity(data
, mask
, &dest
))
3354 target_ht_irq(data
->irq
, dest
, cfg
->vector
);
3355 return IRQ_SET_MASK_OK_NOCOPY
;
3358 static struct irq_chip ht_irq_chip
= {
3360 .irq_mask
= mask_ht_irq
,
3361 .irq_unmask
= unmask_ht_irq
,
3362 .irq_ack
= ack_apic_edge
,
3363 .irq_set_affinity
= ht_set_affinity
,
3364 .irq_retrigger
= ioapic_retrigger_irq
,
3367 int arch_setup_ht_irq(unsigned int irq
, struct pci_dev
*dev
)
3369 struct irq_cfg
*cfg
;
3370 struct ht_irq_msg msg
;
3378 err
= assign_irq_vector(irq
, cfg
, apic
->target_cpus());
3382 err
= apic
->cpu_mask_to_apicid_and(cfg
->domain
,
3383 apic
->target_cpus(), &dest
);
3387 msg
.address_hi
= HT_IRQ_HIGH_DEST_ID(dest
);
3391 HT_IRQ_LOW_DEST_ID(dest
) |
3392 HT_IRQ_LOW_VECTOR(cfg
->vector
) |
3393 ((apic
->irq_dest_mode
== 0) ?
3394 HT_IRQ_LOW_DM_PHYSICAL
:
3395 HT_IRQ_LOW_DM_LOGICAL
) |
3396 HT_IRQ_LOW_RQEOI_EDGE
|
3397 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3398 HT_IRQ_LOW_MT_FIXED
:
3399 HT_IRQ_LOW_MT_ARBITRATED
) |
3400 HT_IRQ_LOW_IRQ_MASKED
;
3402 write_ht_irq_msg(irq
, &msg
);
3404 irq_set_chip_and_handler_name(irq
, &ht_irq_chip
,
3405 handle_edge_irq
, "edge");
3407 dev_printk(KERN_DEBUG
, &dev
->dev
, "irq %d for HT\n", irq
);
3411 #endif /* CONFIG_HT_IRQ */
3414 io_apic_setup_irq_pin(unsigned int irq
, int node
, struct io_apic_irq_attr
*attr
)
3416 struct irq_cfg
*cfg
= alloc_irq_and_cfg_at(irq
, node
);
3421 ret
= __add_pin_to_irq_node(cfg
, node
, attr
->ioapic
, attr
->ioapic_pin
);
3423 setup_ioapic_irq(irq
, cfg
, attr
);
3427 int io_apic_setup_irq_pin_once(unsigned int irq
, int node
,
3428 struct io_apic_irq_attr
*attr
)
3430 unsigned int ioapic_idx
= attr
->ioapic
, pin
= attr
->ioapic_pin
;
3433 /* Avoid redundant programming */
3434 if (test_bit(pin
, ioapics
[ioapic_idx
].pin_programmed
)) {
3435 pr_debug("Pin %d-%d already programmed\n",
3436 mpc_ioapic_id(ioapic_idx
), pin
);
3439 ret
= io_apic_setup_irq_pin(irq
, node
, attr
);
3441 set_bit(pin
, ioapics
[ioapic_idx
].pin_programmed
);
3445 static int __init
io_apic_get_redir_entries(int ioapic
)
3447 union IO_APIC_reg_01 reg_01
;
3448 unsigned long flags
;
3450 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3451 reg_01
.raw
= io_apic_read(ioapic
, 1);
3452 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3454 /* The register returns the maximum index redir index
3455 * supported, which is one less than the total number of redir
3458 return reg_01
.bits
.entries
+ 1;
3461 static void __init
probe_nr_irqs_gsi(void)
3465 nr
= gsi_top
+ NR_IRQS_LEGACY
;
3466 if (nr
> nr_irqs_gsi
)
3469 printk(KERN_DEBUG
"nr_irqs_gsi: %d\n", nr_irqs_gsi
);
3472 int get_nr_irqs_gsi(void)
3477 int __init
arch_probe_nr_irqs(void)
3481 if (nr_irqs
> (NR_VECTORS
* nr_cpu_ids
))
3482 nr_irqs
= NR_VECTORS
* nr_cpu_ids
;
3484 nr
= nr_irqs_gsi
+ 8 * nr_cpu_ids
;
3485 #if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
3487 * for MSI and HT dyn irq
3489 nr
+= nr_irqs_gsi
* 16;
3494 return NR_IRQS_LEGACY
;
3497 int io_apic_set_pci_routing(struct device
*dev
, int irq
,
3498 struct io_apic_irq_attr
*irq_attr
)
3502 if (!IO_APIC_IRQ(irq
)) {
3503 apic_printk(APIC_QUIET
,KERN_ERR
"IOAPIC[%d]: Invalid reference to IRQ 0\n",
3508 node
= dev
? dev_to_node(dev
) : cpu_to_node(0);
3510 return io_apic_setup_irq_pin_once(irq
, node
, irq_attr
);
3513 #ifdef CONFIG_X86_32
3514 static int __init
io_apic_get_unique_id(int ioapic
, int apic_id
)
3516 union IO_APIC_reg_00 reg_00
;
3517 static physid_mask_t apic_id_map
= PHYSID_MASK_NONE
;
3519 unsigned long flags
;
3523 * The P4 platform supports up to 256 APIC IDs on two separate APIC
3524 * buses (one for LAPICs, one for IOAPICs), where predecessors only
3525 * supports up to 16 on one shared APIC bus.
3527 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
3528 * advantage of new APIC bus architecture.
3531 if (physids_empty(apic_id_map
))
3532 apic
->ioapic_phys_id_map(&phys_cpu_present_map
, &apic_id_map
);
3534 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3535 reg_00
.raw
= io_apic_read(ioapic
, 0);
3536 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3538 if (apic_id
>= get_physical_broadcast()) {
3539 printk(KERN_WARNING
"IOAPIC[%d]: Invalid apic_id %d, trying "
3540 "%d\n", ioapic
, apic_id
, reg_00
.bits
.ID
);
3541 apic_id
= reg_00
.bits
.ID
;
3545 * Every APIC in a system must have a unique ID or we get lots of nice
3546 * 'stuck on smp_invalidate_needed IPI wait' messages.
3548 if (apic
->check_apicid_used(&apic_id_map
, apic_id
)) {
3550 for (i
= 0; i
< get_physical_broadcast(); i
++) {
3551 if (!apic
->check_apicid_used(&apic_id_map
, i
))
3555 if (i
== get_physical_broadcast())
3556 panic("Max apic_id exceeded!\n");
3558 printk(KERN_WARNING
"IOAPIC[%d]: apic_id %d already used, "
3559 "trying %d\n", ioapic
, apic_id
, i
);
3564 apic
->apicid_to_cpu_present(apic_id
, &tmp
);
3565 physids_or(apic_id_map
, apic_id_map
, tmp
);
3567 if (reg_00
.bits
.ID
!= apic_id
) {
3568 reg_00
.bits
.ID
= apic_id
;
3570 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3571 io_apic_write(ioapic
, 0, reg_00
.raw
);
3572 reg_00
.raw
= io_apic_read(ioapic
, 0);
3573 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3576 if (reg_00
.bits
.ID
!= apic_id
) {
3577 pr_err("IOAPIC[%d]: Unable to change apic_id!\n",
3583 apic_printk(APIC_VERBOSE
, KERN_INFO
3584 "IOAPIC[%d]: Assigned apic_id %d\n", ioapic
, apic_id
);
3589 static u8 __init
io_apic_unique_id(u8 id
)
3591 if ((boot_cpu_data
.x86_vendor
== X86_VENDOR_INTEL
) &&
3592 !APIC_XAPIC(apic_version
[boot_cpu_physical_apicid
]))
3593 return io_apic_get_unique_id(nr_ioapics
, id
);
3598 static u8 __init
io_apic_unique_id(u8 id
)
3601 DECLARE_BITMAP(used
, 256);
3603 bitmap_zero(used
, 256);
3604 for (i
= 0; i
< nr_ioapics
; i
++) {
3605 __set_bit(mpc_ioapic_id(i
), used
);
3607 if (!test_bit(id
, used
))
3609 return find_first_zero_bit(used
, 256);
3613 static int __init
io_apic_get_version(int ioapic
)
3615 union IO_APIC_reg_01 reg_01
;
3616 unsigned long flags
;
3618 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3619 reg_01
.raw
= io_apic_read(ioapic
, 1);
3620 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3622 return reg_01
.bits
.version
;
3625 int acpi_get_override_irq(u32 gsi
, int *trigger
, int *polarity
)
3627 int ioapic
, pin
, idx
;
3629 if (skip_ioapic_setup
)
3632 ioapic
= mp_find_ioapic(gsi
);
3636 pin
= mp_find_ioapic_pin(ioapic
, gsi
);
3640 idx
= find_irq_entry(ioapic
, pin
, mp_INT
);
3644 *trigger
= irq_trigger(idx
);
3645 *polarity
= irq_polarity(idx
);
3650 * This function currently is only a helper for the i386 smp boot process where
3651 * we need to reprogram the ioredtbls to cater for the cpus which have come online
3652 * so mask in all cases should simply be apic->target_cpus()
3655 void __init
setup_ioapic_dest(void)
3657 int pin
, ioapic
, irq
, irq_entry
;
3658 const struct cpumask
*mask
;
3659 struct irq_data
*idata
;
3661 if (skip_ioapic_setup
== 1)
3664 for (ioapic
= 0; ioapic
< nr_ioapics
; ioapic
++)
3665 for (pin
= 0; pin
< ioapics
[ioapic
].nr_registers
; pin
++) {
3666 irq_entry
= find_irq_entry(ioapic
, pin
, mp_INT
);
3667 if (irq_entry
== -1)
3669 irq
= pin_2_irq(irq_entry
, ioapic
, pin
);
3671 if ((ioapic
> 0) && (irq
> 16))
3674 idata
= irq_get_irq_data(irq
);
3677 * Honour affinities which have been set in early boot
3679 if (!irqd_can_balance(idata
) || irqd_affinity_was_set(idata
))
3680 mask
= idata
->affinity
;
3682 mask
= apic
->target_cpus();
3684 if (irq_remapping_enabled
)
3685 set_remapped_irq_affinity(idata
, mask
, false);
3687 ioapic_set_affinity(idata
, mask
, false);
3693 #define IOAPIC_RESOURCE_NAME_SIZE 11
3695 static struct resource
*ioapic_resources
;
3697 static struct resource
* __init
ioapic_setup_resources(int nr_ioapics
)
3700 struct resource
*res
;
3704 if (nr_ioapics
<= 0)
3707 n
= IOAPIC_RESOURCE_NAME_SIZE
+ sizeof(struct resource
);
3710 mem
= alloc_bootmem(n
);
3713 mem
+= sizeof(struct resource
) * nr_ioapics
;
3715 for (i
= 0; i
< nr_ioapics
; i
++) {
3717 res
[i
].flags
= IORESOURCE_MEM
| IORESOURCE_BUSY
;
3718 snprintf(mem
, IOAPIC_RESOURCE_NAME_SIZE
, "IOAPIC %u", i
);
3719 mem
+= IOAPIC_RESOURCE_NAME_SIZE
;
3722 ioapic_resources
= res
;
3727 void __init
native_io_apic_init_mappings(void)
3729 unsigned long ioapic_phys
, idx
= FIX_IO_APIC_BASE_0
;
3730 struct resource
*ioapic_res
;
3733 ioapic_res
= ioapic_setup_resources(nr_ioapics
);
3734 for (i
= 0; i
< nr_ioapics
; i
++) {
3735 if (smp_found_config
) {
3736 ioapic_phys
= mpc_ioapic_addr(i
);
3737 #ifdef CONFIG_X86_32
3740 "WARNING: bogus zero IO-APIC "
3741 "address found in MPTABLE, "
3742 "disabling IO/APIC support!\n");
3743 smp_found_config
= 0;
3744 skip_ioapic_setup
= 1;
3745 goto fake_ioapic_page
;
3749 #ifdef CONFIG_X86_32
3752 ioapic_phys
= (unsigned long)alloc_bootmem_pages(PAGE_SIZE
);
3753 ioapic_phys
= __pa(ioapic_phys
);
3755 set_fixmap_nocache(idx
, ioapic_phys
);
3756 apic_printk(APIC_VERBOSE
, "mapped IOAPIC to %08lx (%08lx)\n",
3757 __fix_to_virt(idx
) + (ioapic_phys
& ~PAGE_MASK
),
3761 ioapic_res
->start
= ioapic_phys
;
3762 ioapic_res
->end
= ioapic_phys
+ IO_APIC_SLOT_SIZE
- 1;
3766 probe_nr_irqs_gsi();
3769 void __init
ioapic_insert_resources(void)
3772 struct resource
*r
= ioapic_resources
;
3777 "IO APIC resources couldn't be allocated.\n");
3781 for (i
= 0; i
< nr_ioapics
; i
++) {
3782 insert_resource(&iomem_resource
, r
);
3787 int mp_find_ioapic(u32 gsi
)
3791 if (nr_ioapics
== 0)
3794 /* Find the IOAPIC that manages this GSI. */
3795 for (i
= 0; i
< nr_ioapics
; i
++) {
3796 struct mp_ioapic_gsi
*gsi_cfg
= mp_ioapic_gsi_routing(i
);
3797 if ((gsi
>= gsi_cfg
->gsi_base
)
3798 && (gsi
<= gsi_cfg
->gsi_end
))
3802 printk(KERN_ERR
"ERROR: Unable to locate IOAPIC for GSI %d\n", gsi
);
3806 int mp_find_ioapic_pin(int ioapic
, u32 gsi
)
3808 struct mp_ioapic_gsi
*gsi_cfg
;
3810 if (WARN_ON(ioapic
== -1))
3813 gsi_cfg
= mp_ioapic_gsi_routing(ioapic
);
3814 if (WARN_ON(gsi
> gsi_cfg
->gsi_end
))
3817 return gsi
- gsi_cfg
->gsi_base
;
3820 static __init
int bad_ioapic(unsigned long address
)
3822 if (nr_ioapics
>= MAX_IO_APICS
) {
3823 pr_warn("WARNING: Max # of I/O APICs (%d) exceeded (found %d), skipping\n",
3824 MAX_IO_APICS
, nr_ioapics
);
3828 pr_warn("WARNING: Bogus (zero) I/O APIC address found in table, skipping!\n");
3834 static __init
int bad_ioapic_register(int idx
)
3836 union IO_APIC_reg_00 reg_00
;
3837 union IO_APIC_reg_01 reg_01
;
3838 union IO_APIC_reg_02 reg_02
;
3840 reg_00
.raw
= io_apic_read(idx
, 0);
3841 reg_01
.raw
= io_apic_read(idx
, 1);
3842 reg_02
.raw
= io_apic_read(idx
, 2);
3844 if (reg_00
.raw
== -1 && reg_01
.raw
== -1 && reg_02
.raw
== -1) {
3845 pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n",
3846 mpc_ioapic_addr(idx
));
3853 void __init
mp_register_ioapic(int id
, u32 address
, u32 gsi_base
)
3857 struct mp_ioapic_gsi
*gsi_cfg
;
3859 if (bad_ioapic(address
))
3864 ioapics
[idx
].mp_config
.type
= MP_IOAPIC
;
3865 ioapics
[idx
].mp_config
.flags
= MPC_APIC_USABLE
;
3866 ioapics
[idx
].mp_config
.apicaddr
= address
;
3868 set_fixmap_nocache(FIX_IO_APIC_BASE_0
+ idx
, address
);
3870 if (bad_ioapic_register(idx
)) {
3871 clear_fixmap(FIX_IO_APIC_BASE_0
+ idx
);
3875 ioapics
[idx
].mp_config
.apicid
= io_apic_unique_id(id
);
3876 ioapics
[idx
].mp_config
.apicver
= io_apic_get_version(idx
);
3879 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
3880 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
3882 entries
= io_apic_get_redir_entries(idx
);
3883 gsi_cfg
= mp_ioapic_gsi_routing(idx
);
3884 gsi_cfg
->gsi_base
= gsi_base
;
3885 gsi_cfg
->gsi_end
= gsi_base
+ entries
- 1;
3888 * The number of IO-APIC IRQ registers (== #pins):
3890 ioapics
[idx
].nr_registers
= entries
;
3892 if (gsi_cfg
->gsi_end
>= gsi_top
)
3893 gsi_top
= gsi_cfg
->gsi_end
+ 1;
3895 pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n",
3896 idx
, mpc_ioapic_id(idx
),
3897 mpc_ioapic_ver(idx
), mpc_ioapic_addr(idx
),
3898 gsi_cfg
->gsi_base
, gsi_cfg
->gsi_end
);
3903 /* Enable IOAPIC early just for system timer */
3904 void __init
pre_init_apic_IRQ0(void)
3906 struct io_apic_irq_attr attr
= { 0, 0, 0, 0 };
3908 printk(KERN_INFO
"Early APIC setup for system timer0\n");
3910 physid_set_mask_of_physid(boot_cpu_physical_apicid
,
3911 &phys_cpu_present_map
);
3915 io_apic_setup_irq_pin(0, 0, &attr
);
3916 irq_set_chip_and_handler_name(0, &ioapic_chip
, handle_edge_irq
,