mm: make wait_on_page_writeback() wait for multiple pending writebacks
[linux/fpc-iii.git] / arch / arm / mach-omap1 / ams-delta-fiq.c
blob4eea3e39e633655a764a404bbdaa7955a65a96aa
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Amstrad E3 FIQ handling
5 * Copyright (C) 2009 Janusz Krzysztofik
6 * Copyright (c) 2006 Matt Callow
7 * Copyright (c) 2004 Amstrad Plc
8 * Copyright (C) 2001 RidgeRun, Inc.
10 * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
11 * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
13 #include <linux/gpio/consumer.h>
14 #include <linux/gpio/machine.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/interrupt.h>
17 #include <linux/irq.h>
18 #include <linux/module.h>
19 #include <linux/io.h>
20 #include <linux/platform_data/ams-delta-fiq.h>
21 #include <linux/platform_device.h>
23 #include <asm/fiq.h>
25 #include "ams-delta-fiq.h"
26 #include "board-ams-delta.h"
28 static struct fiq_handler fh = {
29 .name = "ams-delta-fiq"
33 * This buffer is shared between FIQ and IRQ contexts.
34 * The FIQ and IRQ isrs can both read and write it.
35 * It is structured as a header section several 32bit slots,
36 * followed by the circular buffer where the FIQ isr stores
37 * keystrokes received from the qwerty keyboard. See
38 * <linux/platform_data/ams-delta-fiq.h> for details of offsets.
40 static unsigned int fiq_buffer[1024];
42 static struct irq_chip *irq_chip;
43 static struct irq_data *irq_data[16];
44 static unsigned int irq_counter[16];
46 static const char *pin_name[16] __initconst = {
47 [AMS_DELTA_GPIO_PIN_KEYBRD_DATA] = "keybrd_data",
48 [AMS_DELTA_GPIO_PIN_KEYBRD_CLK] = "keybrd_clk",
51 static irqreturn_t deferred_fiq(int irq, void *dev_id)
53 struct irq_data *d;
54 int gpio, irq_num, fiq_count;
57 * For each handled GPIO interrupt, keep calling its interrupt handler
58 * until the IRQ counter catches the FIQ incremented interrupt counter.
60 for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
61 gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
62 d = irq_data[gpio];
63 irq_num = d->irq;
64 fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
66 if (irq_counter[gpio] < fiq_count &&
67 gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
69 * handle_simple_irq() that OMAP GPIO edge
70 * interrupts default to since commit 80ac93c27441
71 * requires interrupt already acked and unmasked.
73 if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
74 irq_chip->irq_unmask(d);
76 for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
77 generic_handle_irq(irq_num);
79 return IRQ_HANDLED;
82 void __init ams_delta_init_fiq(struct gpio_chip *chip,
83 struct platform_device *serio)
85 struct gpio_desc *gpiod, *data = NULL, *clk = NULL;
86 void *fiqhandler_start;
87 unsigned int fiqhandler_length;
88 struct pt_regs FIQ_regs;
89 unsigned long val, offset;
90 int i, retval;
92 /* Store irq_chip location for IRQ handler use */
93 irq_chip = chip->irq.chip;
94 if (!irq_chip) {
95 pr_err("%s: GPIO chip %s is missing IRQ function\n", __func__,
96 chip->label);
97 return;
100 for (i = 0; i < ARRAY_SIZE(irq_data); i++) {
101 gpiod = gpiochip_request_own_desc(chip, i, pin_name[i],
102 GPIO_ACTIVE_HIGH, GPIOD_IN);
103 if (IS_ERR(gpiod)) {
104 pr_err("%s: failed to get GPIO pin %d (%ld)\n",
105 __func__, i, PTR_ERR(gpiod));
106 return;
108 /* Store irq_data location for IRQ handler use */
109 irq_data[i] = irq_get_irq_data(gpiod_to_irq(gpiod));
112 * FIQ handler takes full control over serio data and clk GPIO
113 * pins. Initialize them and keep requested so nobody can
114 * interfere. Fail if any of those two couldn't be requested.
116 switch (i) {
117 case AMS_DELTA_GPIO_PIN_KEYBRD_DATA:
118 data = gpiod;
119 gpiod_direction_input(data);
120 break;
121 case AMS_DELTA_GPIO_PIN_KEYBRD_CLK:
122 clk = gpiod;
123 gpiod_direction_input(clk);
124 break;
125 default:
126 gpiochip_free_own_desc(gpiod);
127 break;
130 if (!data || !clk)
131 goto out_gpio;
133 fiqhandler_start = &qwerty_fiqin_start;
134 fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
135 pr_info("Installing fiq handler from %p, length 0x%x\n",
136 fiqhandler_start, fiqhandler_length);
138 retval = claim_fiq(&fh);
139 if (retval) {
140 pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
141 retval);
142 goto out_gpio;
145 retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
146 IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL);
147 if (retval < 0) {
148 pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
149 release_fiq(&fh);
150 goto out_gpio;
153 * Since no set_type() method is provided by OMAP irq chip,
154 * switch to edge triggered interrupt type manually.
156 offset = IRQ_ILR0_REG_OFFSET +
157 ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4;
158 val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
159 omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
161 set_fiq_handler(fiqhandler_start, fiqhandler_length);
164 * Initialise the buffer which is shared
165 * between FIQ mode and IRQ mode
167 fiq_buffer[FIQ_GPIO_INT_MASK] = 0;
168 fiq_buffer[FIQ_MASK] = 0;
169 fiq_buffer[FIQ_STATE] = 0;
170 fiq_buffer[FIQ_KEY] = 0;
171 fiq_buffer[FIQ_KEYS_CNT] = 0;
172 fiq_buffer[FIQ_KEYS_HICNT] = 0;
173 fiq_buffer[FIQ_TAIL_OFFSET] = 0;
174 fiq_buffer[FIQ_HEAD_OFFSET] = 0;
175 fiq_buffer[FIQ_BUF_LEN] = 256;
176 fiq_buffer[FIQ_MISSED_KEYS] = 0;
177 fiq_buffer[FIQ_BUFFER_START] =
178 (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
180 for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
181 fiq_buffer[i] = 0;
184 * FIQ mode r9 always points to the fiq_buffer, because the FIQ isr
185 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
186 * only means of communication with the IRQ level and other kernel
187 * context code.
189 FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
190 set_fiq_regs(&FIQ_regs);
192 pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
195 * Redirect GPIO interrupts to FIQ
197 offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4;
198 val = omap_readl(OMAP_IH1_BASE + offset) | 1;
199 omap_writel(val, OMAP_IH1_BASE + offset);
201 /* Initialize serio device IRQ resource and platform_data */
202 serio->resource[0].start = gpiod_to_irq(clk);
203 serio->resource[0].end = serio->resource[0].start;
204 serio->dev.platform_data = fiq_buffer;
207 * Since FIQ handler performs handling of GPIO registers for
208 * "keybrd_clk" IRQ pin, ams_delta_serio driver used to set
209 * handle_simple_irq() as active IRQ handler for that pin to avoid
210 * bad interaction with gpio-omap driver. This is no longer needed
211 * as handle_simple_irq() is now the default handler for OMAP GPIO
212 * edge interrupts.
213 * This comment replaces the obsolete code which has been removed
214 * from the ams_delta_serio driver and stands here only as a reminder
215 * of that dependency on gpio-omap driver behavior.
218 return;
220 out_gpio:
221 if (data)
222 gpiochip_free_own_desc(data);
223 if (clk)
224 gpiochip_free_own_desc(clk);