mm: make wait_on_page_writeback() wait for multiple pending writebacks
[linux/fpc-iii.git] / arch / arm / mach-omap1 / io.c
blob5a173fc2a1ca1a5153538cbcd4603e9fa95a8bc7
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/mach-omap1/io.c
5 * OMAP1 I/O mapping code
6 */
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
13 #include <asm/tlb.h>
14 #include <asm/mach/map.h>
16 #include <mach/mux.h>
17 #include <mach/tc.h>
18 #include <linux/omap-dma.h>
20 #include "iomap.h"
21 #include "common.h"
22 #include "clock.h"
25 * The machine specific code may provide the extra mapping besides the
26 * default mapping provided here.
28 static struct map_desc omap_io_desc[] __initdata = {
30 .virtual = OMAP1_IO_VIRT,
31 .pfn = __phys_to_pfn(OMAP1_IO_PHYS),
32 .length = OMAP1_IO_SIZE,
33 .type = MT_DEVICE
37 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
38 static struct map_desc omap7xx_io_desc[] __initdata = {
40 .virtual = OMAP7XX_DSP_BASE,
41 .pfn = __phys_to_pfn(OMAP7XX_DSP_START),
42 .length = OMAP7XX_DSP_SIZE,
43 .type = MT_DEVICE
44 }, {
45 .virtual = OMAP7XX_DSPREG_BASE,
46 .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START),
47 .length = OMAP7XX_DSPREG_SIZE,
48 .type = MT_DEVICE
51 #endif
53 #ifdef CONFIG_ARCH_OMAP15XX
54 static struct map_desc omap1510_io_desc[] __initdata = {
56 .virtual = OMAP1510_DSP_BASE,
57 .pfn = __phys_to_pfn(OMAP1510_DSP_START),
58 .length = OMAP1510_DSP_SIZE,
59 .type = MT_DEVICE
60 }, {
61 .virtual = OMAP1510_DSPREG_BASE,
62 .pfn = __phys_to_pfn(OMAP1510_DSPREG_START),
63 .length = OMAP1510_DSPREG_SIZE,
64 .type = MT_DEVICE
67 #endif
69 #if defined(CONFIG_ARCH_OMAP16XX)
70 static struct map_desc omap16xx_io_desc[] __initdata = {
72 .virtual = OMAP16XX_DSP_BASE,
73 .pfn = __phys_to_pfn(OMAP16XX_DSP_START),
74 .length = OMAP16XX_DSP_SIZE,
75 .type = MT_DEVICE
76 }, {
77 .virtual = OMAP16XX_DSPREG_BASE,
78 .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START),
79 .length = OMAP16XX_DSPREG_SIZE,
80 .type = MT_DEVICE
83 #endif
86 * Maps common IO regions for omap1
88 static void __init omap1_map_common_io(void)
90 iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
93 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
94 void __init omap7xx_map_io(void)
96 omap1_map_common_io();
97 iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
99 #endif
101 #ifdef CONFIG_ARCH_OMAP15XX
102 void __init omap15xx_map_io(void)
104 omap1_map_common_io();
105 iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
107 #endif
109 #if defined(CONFIG_ARCH_OMAP16XX)
110 void __init omap16xx_map_io(void)
112 omap1_map_common_io();
113 iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
115 #endif
118 * Common low-level hardware init for omap1.
120 void __init omap1_init_early(void)
122 omap_check_revision();
124 /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
125 * on a Posted Write in the TIPB Bridge".
127 omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
128 omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
130 /* Must init clocks early to assure that timer interrupt works
132 omap1_clk_init();
133 omap1_mux_init();
136 void __init omap1_init_late(void)
138 omap_serial_wakeup_init();
142 * NOTE: Please use ioremap + __raw_read/write where possible instead of these
145 u8 omap_readb(u32 pa)
147 return __raw_readb(OMAP1_IO_ADDRESS(pa));
149 EXPORT_SYMBOL(omap_readb);
151 u16 omap_readw(u32 pa)
153 return __raw_readw(OMAP1_IO_ADDRESS(pa));
155 EXPORT_SYMBOL(omap_readw);
157 u32 omap_readl(u32 pa)
159 return __raw_readl(OMAP1_IO_ADDRESS(pa));
161 EXPORT_SYMBOL(omap_readl);
163 void omap_writeb(u8 v, u32 pa)
165 __raw_writeb(v, OMAP1_IO_ADDRESS(pa));
167 EXPORT_SYMBOL(omap_writeb);
169 void omap_writew(u16 v, u32 pa)
171 __raw_writew(v, OMAP1_IO_ADDRESS(pa));
173 EXPORT_SYMBOL(omap_writew);
175 void omap_writel(u32 v, u32 pa)
177 __raw_writel(v, OMAP1_IO_ADDRESS(pa));
179 EXPORT_SYMBOL(omap_writel);