arch/arm/mach-s3c/pm-s3c64xx.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright 2008 Openmoko, Inc.
   4 // Copyright 2008 Simtec Electronics
   5 //      Ben Dooks <ben@simtec.co.uk>
   6 //      http://armlinux.simtec.co.uk/
   7 //
   8 // S3C64XX CPU PM support.
   9
  10 #include <linux/init.h>
  11 #include <linux/suspend.h>
  12 #include <linux/serial_core.h>
  13 #include <linux/io.h>
  14 #include <linux/gpio.h>
  15 #include <linux/pm_domain.h>
  16
  17 #include "map.h"
  18 #include <mach/irqs.h>
  19
  20 #include "cpu.h"
  21 #include "devs.h"
  22 #include "pm.h"
  23 #include "wakeup-mask.h"
  24
  25 #include "regs-gpio.h"
  26 #include "regs-clock.h"
  27 #include "gpio-samsung.h"
  28
  29 #include "regs-gpio-memport-s3c64xx.h"
  30 #include "regs-modem-s3c64xx.h"
  31 #include "regs-sys-s3c64xx.h"
  32 #include "regs-syscon-power-s3c64xx.h"
  33
  34 struct s3c64xx_pm_domain {
  35         char *const name;
  36         u32 ena;
  37         u32 pwr_stat;
  38         struct generic_pm_domain pd;
  39 };
  40
  41 static int s3c64xx_pd_off(struct generic_pm_domain *domain)
  42 {
  43         struct s3c64xx_pm_domain *pd;
  44         u32 val;
  45
  46         pd = container_of(domain, struct s3c64xx_pm_domain, pd);
  47
  48         val = __raw_readl(S3C64XX_NORMAL_CFG);
  49         val &= ~(pd->ena);
  50         __raw_writel(val, S3C64XX_NORMAL_CFG);
  51
  52         return 0;
  53 }
  54
  55 static int s3c64xx_pd_on(struct generic_pm_domain *domain)
  56 {
  57         struct s3c64xx_pm_domain *pd;
  58         u32 val;
  59         long retry = 1000000L;
  60
  61         pd = container_of(domain, struct s3c64xx_pm_domain, pd);
  62
  63         val = __raw_readl(S3C64XX_NORMAL_CFG);
  64         val |= pd->ena;
  65         __raw_writel(val, S3C64XX_NORMAL_CFG);
  66
  67         /* Not all domains provide power status readback */
  68         if (pd->pwr_stat) {
  69                 do {
  70                         cpu_relax();
  71                         if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
  72                                 break;
  73                 } while (retry--);
  74
  75                 if (!retry) {
  76                         pr_err("Failed to start domain %s\n", pd->name);
  77                         return -EBUSY;
  78                 }
  79         }
  80
  81         return 0;
  82 }
  83
  84 static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
  85         .name = "IROM",
  86         .ena = S3C64XX_NORMALCFG_IROM_ON,
  87         .pd = {
  88                 .power_off = s3c64xx_pd_off,
  89                 .power_on = s3c64xx_pd_on,
  90         },
  91 };
  92
  93 static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
  94         .name = "ETM",
  95         .ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
  96         .pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
  97         .pd = {
  98                 .power_off = s3c64xx_pd_off,
  99                 .power_on = s3c64xx_pd_on,
 100         },
 101 };
 102
 103 static struct s3c64xx_pm_domain s3c64xx_pm_s = {
 104         .name = "S",
 105         .ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
 106         .pwr_stat = S3C64XX_BLKPWRSTAT_S,
 107         .pd = {
 108                 .power_off = s3c64xx_pd_off,
 109                 .power_on = s3c64xx_pd_on,
 110         },
 111 };
 112
 113 static struct s3c64xx_pm_domain s3c64xx_pm_f = {
 114         .name = "F",
 115         .ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
 116         .pwr_stat = S3C64XX_BLKPWRSTAT_F,
 117         .pd = {
 118                 .power_off = s3c64xx_pd_off,
 119                 .power_on = s3c64xx_pd_on,
 120         },
 121 };
 122
 123 static struct s3c64xx_pm_domain s3c64xx_pm_p = {
 124         .name = "P",
 125         .ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
 126         .pwr_stat = S3C64XX_BLKPWRSTAT_P,
 127         .pd = {
 128                 .power_off = s3c64xx_pd_off,
 129                 .power_on = s3c64xx_pd_on,
 130         },
 131 };
 132
 133 static struct s3c64xx_pm_domain s3c64xx_pm_i = {
 134         .name = "I",
 135         .ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
 136         .pwr_stat = S3C64XX_BLKPWRSTAT_I,
 137         .pd = {
 138                 .power_off = s3c64xx_pd_off,
 139                 .power_on = s3c64xx_pd_on,
 140         },
 141 };
 142
 143 static struct s3c64xx_pm_domain s3c64xx_pm_g = {
 144         .name = "G",
 145         .ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
 146         .pd = {
 147                 .power_off = s3c64xx_pd_off,
 148                 .power_on = s3c64xx_pd_on,
 149         },
 150 };
 151
 152 static struct s3c64xx_pm_domain s3c64xx_pm_v = {
 153         .name = "V",
 154         .ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
 155         .pwr_stat = S3C64XX_BLKPWRSTAT_V,
 156         .pd = {
 157                 .power_off = s3c64xx_pd_off,
 158                 .power_on = s3c64xx_pd_on,
 159         },
 160 };
 161
 162 static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
 163         &s3c64xx_pm_irom,
 164 };
 165
 166 static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
 167         &s3c64xx_pm_etm,
 168         &s3c64xx_pm_g,
 169         &s3c64xx_pm_v,
 170         &s3c64xx_pm_i,
 171         &s3c64xx_pm_p,
 172         &s3c64xx_pm_s,
 173         &s3c64xx_pm_f,
 174 };
 175
 176 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 177 void s3c_pm_debug_smdkled(u32 set, u32 clear)
 178 {
 179         unsigned long flags;
 180         int i;
 181
 182         local_irq_save(flags);
 183         for (i = 0; i < 4; i++) {
 184                 if (clear & (1 << i))
 185                         gpio_set_value(S3C64XX_GPN(12 + i), 0);
 186                 if (set & (1 << i))
 187                         gpio_set_value(S3C64XX_GPN(12 + i), 1);
 188         }
 189         local_irq_restore(flags);
 190 }
 191 #endif
 192
 193 #ifdef CONFIG_PM_SLEEP
 194 static struct sleep_save core_save[] = {
 195         SAVE_ITEM(S3C64XX_MEM0DRVCON),
 196         SAVE_ITEM(S3C64XX_MEM1DRVCON),
 197 };
 198
 199 static struct sleep_save misc_save[] = {
 200         SAVE_ITEM(S3C64XX_AHB_CON0),
 201         SAVE_ITEM(S3C64XX_AHB_CON1),
 202         SAVE_ITEM(S3C64XX_AHB_CON2),
 203
 204         SAVE_ITEM(S3C64XX_SPCON),
 205
 206         SAVE_ITEM(S3C64XX_MEM0CONSTOP),
 207         SAVE_ITEM(S3C64XX_MEM1CONSTOP),
 208         SAVE_ITEM(S3C64XX_MEM0CONSLP0),
 209         SAVE_ITEM(S3C64XX_MEM0CONSLP1),
 210         SAVE_ITEM(S3C64XX_MEM1CONSLP),
 211
 212         SAVE_ITEM(S3C64XX_SDMA_SEL),
 213         SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
 214
 215         SAVE_ITEM(S3C64XX_NORMAL_CFG),
 216 };
 217
 218 void s3c_pm_configure_extint(void)
 219 {
 220         __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
 221 }
 222
 223 void s3c_pm_restore_core(void)
 224 {
 225         __raw_writel(0, S3C64XX_EINT_MASK);
 226
 227         s3c_pm_debug_smdkled(1 << 2, 0);
 228
 229         s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 230         s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 231 }
 232
 233 void s3c_pm_save_core(void)
 234 {
 235         s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 236         s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 237 }
 238 #endif
 239
 240 /* since both s3c6400 and s3c6410 share the same sleep pm calls, we
 241  * put the per-cpu code in here until any new cpu comes along and changes
 242  * this.
 243  */
 244
 245 static int s3c64xx_cpu_suspend(unsigned long arg)
 246 {
 247         unsigned long tmp;
 248
 249         /* set our standby method to sleep */
 250
 251         tmp = __raw_readl(S3C64XX_PWR_CFG);
 252         tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
 253         tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
 254         __raw_writel(tmp, S3C64XX_PWR_CFG);
 255
 256         /* clear any old wakeup */
 257
 258         __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
 259                      S3C64XX_WAKEUP_STAT);
 260
 261         /* set the LED state to 0110 over sleep */
 262         s3c_pm_debug_smdkled(3 << 1, 0xf);
 263
 264         /* issue the standby signal into the pm unit. Note, we
 265          * issue a write-buffer drain just in case */
 266
 267         tmp = 0;
 268
 269         asm("b 1f\n\t"
 270             ".align 5\n\t"
 271             "1:\n\t"
 272             "mcr p15, 0, %0, c7, c10, 5\n\t"
 273             "mcr p15, 0, %0, c7, c10, 4\n\t"
 274             "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
 275
 276         /* we should never get past here */
 277
 278         pr_info("Failed to suspend the system\n");
 279         return 1; /* Aborting suspend */
 280 }
 281
 282 /* mapping of interrupts to parts of the wakeup mask */
 283 static const struct samsung_wakeup_mask wake_irqs[] = {
 284         { .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
 285         { .irq = IRQ_RTC_TIC,   .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
 286         { .irq = IRQ_PENDN,     .bit = S3C64XX_PWRCFG_TS_DISABLE, },
 287         { .irq = IRQ_HSMMC0,    .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
 288         { .irq = IRQ_HSMMC1,    .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
 289         { .irq = IRQ_HSMMC2,    .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
 290         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
 291         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
 292         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
 293         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
 294 };
 295
 296 static void s3c64xx_pm_prepare(void)
 297 {
 298         samsung_sync_wakemask(S3C64XX_PWR_CFG,
 299                               wake_irqs, ARRAY_SIZE(wake_irqs));
 300
 301         /* store address of resume. */
 302         __raw_writel(__pa_symbol(s3c_cpu_resume), S3C64XX_INFORM0);
 303
 304         /* ensure previous wakeup state is cleared before sleeping */
 305         __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
 306 }
 307
 308 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 309 void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
 310 {
 311         u32 ucon;
 312         u32 ucon_clk
 313         u32 save_clk;
 314         u32 new_ucon;
 315         u32 delta;
 316
 317         if (!soc_is_s3c64xx())
 318                 return;
 319
 320         ucon = __raw_readl(regs + S3C2410_UCON);
 321         ucon_clk = ucon & S3C6400_UCON_CLKMASK;
 322         sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
 323
 324         /* S3C64XX UART blocks only support level interrupts, so ensure that
 325          * when we restore unused UART blocks we force the level interrupt
 326          * settigs. */
 327         save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
 328
 329         /* We have a constraint on changing the clock type of the UART
 330          * between UCLKx and PCLK, so ensure that when we restore UCON
 331          * that the CLK field is correctly modified if the bootloader
 332          * has changed anything.
 333          */
 334         if (ucon_clk != save_clk) {
 335                 new_ucon = save->ucon;
 336                 delta = ucon_clk ^ save_clk;
 337
 338                 /* change from UCLKx => wrong PCLK,
 339                  * either UCLK can be tested for by a bit-test
 340                  * with UCLK0 */
 341                 if (ucon_clk & S3C6400_UCON_UCLK0 &&
 342                     !(save_clk & S3C6400_UCON_UCLK0) &&
 343                     delta & S3C6400_UCON_PCLK2) {
 344                         new_ucon &= ~S3C6400_UCON_UCLK0;
 345                 } else if (delta == S3C6400_UCON_PCLK2) {
 346                         /* as an precaution, don't change from
 347                          * PCLK2 => PCLK or vice-versa */
 348                         new_ucon ^= S3C6400_UCON_PCLK2;
 349                 }
 350
 351                 S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
 352                           ucon, new_ucon, save->ucon);
 353                 save->ucon = new_ucon;
 354         }
 355 }
 356 #endif
 357
 358 int __init s3c64xx_pm_init(void)
 359 {
 360         int i;
 361
 362         s3c_pm_init();
 363
 364         for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
 365                 pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
 366                               &pm_domain_always_on_gov, false);
 367
 368         for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
 369                 pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
 370
 371 #ifdef CONFIG_S3C_DEV_FB
 372         if (dev_get_platdata(&s3c_device_fb.dev))
 373                 pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
 374 #endif
 375
 376         return 0;
 377 }
 378
 379 static __init int s3c64xx_pm_initcall(void)
 380 {
 381         if (!soc_is_s3c64xx())
 382                 return 0;
 383
 384         pm_cpu_prep = s3c64xx_pm_prepare;
 385         pm_cpu_sleep = s3c64xx_cpu_suspend;
 386
 387 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 388         gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
 389         gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
 390         gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
 391         gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
 392         gpio_direction_output(S3C64XX_GPN(12), 0);
 393         gpio_direction_output(S3C64XX_GPN(13), 0);
 394         gpio_direction_output(S3C64XX_GPN(14), 0);
 395         gpio_direction_output(S3C64XX_GPN(15), 0);
 396 #endif
 397
 398         return 0;
 399 }
 400 arch_initcall(s3c64xx_pm_initcall);