| blob | 61ce82aca6f0d6033e7357d2ea0f940da8def0c3 |
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon
4 *
5 * Heavily based on proc-arm926.S
6 * Maintainer: Assaf Hoffman <hoffman@marvell.com>
7 */
9 #include <linux/linkage.h>
10 #include <linux/init.h>
11 #include <linux/pgtable.h>
12 #include <asm/assembler.h>
13 #include <asm/hwcap.h>
14 #include <asm/pgtable-hwdef.h>
15 #include <asm/page.h>
16 #include <asm/ptrace.h>
17 #include "proc-macros.S"
19 /*
20 * This is the maximum size of an area which will be invalidated
21 * using the single invalidate entry instructions. Anything larger
22 * than this, and we go for the whole cache.
23 *
24 * This value should be chosen such that we choose the cheapest
25 * alternative.
26 */
27 #define CACHE_DLIMIT 16384
29 /*
30 * the cache line size of the I and D cache
31 */
32 #define CACHE_DLINESIZE 32
34 .bss
35 .align 3
36 __cache_params_loc:
37 .space 8
39 .text
40 __cache_params:
41 .word __cache_params_loc
43 /*
44 * cpu_feroceon_proc_init()
45 */
46 ENTRY(cpu_feroceon_proc_init)
47 mrc p15, 0, r0, c0, c0, 1 @ read cache type register
48 ldr r1, __cache_params
49 mov r2, #(16 << 5)
50 tst r0, #(1 << 16) @ get way
51 mov r0, r0, lsr #18 @ get cache size order
52 movne r3, #((4 - 1) << 30) @ 4-way
53 and r0, r0, #0xf
54 moveq r3, #0 @ 1-way
55 mov r2, r2, lsl r0 @ actual cache size
56 movne r2, r2, lsr #2 @ turned into # of sets
57 sub r2, r2, #(1 << 5)
58 stmia r1, {r2, r3}
59 ret lr
61 /*
62 * cpu_feroceon_proc_fin()
63 */
64 ENTRY(cpu_feroceon_proc_fin)
65 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
66 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
67 mov r0, #0
68 mcr p15, 1, r0, c15, c9, 0 @ clean L2
69 mcr p15, 0, r0, c7, c10, 4 @ drain WB
70 #endif
72 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
73 bic r0, r0, #0x1000 @ ...i............
74 bic r0, r0, #0x000e @ ............wca.
75 mcr p15, 0, r0, c1, c0, 0 @ disable caches
76 ret lr
78 /*
79 * cpu_feroceon_reset(loc)
80 *
81 * Perform a soft reset of the system. Put the CPU into the
82 * same state as it would be if it had been reset, and branch
83 * to what would be the reset vector.
84 *
85 * loc: location to jump to for soft reset
86 */
87 .align 5
88 .pushsection .idmap.text, "ax"
89 ENTRY(cpu_feroceon_reset)
90 mov ip, #0
91 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
92 mcr p15, 0, ip, c7, c10, 4 @ drain WB
93 #ifdef CONFIG_MMU
94 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
95 #endif
96 mrc p15, 0, ip, c1, c0, 0 @ ctrl register
97 bic ip, ip, #0x000f @ ............wcam
98 bic ip, ip, #0x1100 @ ...i...s........
99 mcr p15, 0, ip, c1, c0, 0 @ ctrl register
100 ret r0
101 ENDPROC(cpu_feroceon_reset)
102 .popsection
104 /*
105 * cpu_feroceon_do_idle()
106 *
107 * Called with IRQs disabled
108 */
109 .align 5
110 ENTRY(cpu_feroceon_do_idle)
111 mov r0, #0
112 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
113 mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
114 ret lr
116 /*
117 * flush_icache_all()
118 *
119 * Unconditionally clean and invalidate the entire icache.
120 */
121 ENTRY(feroceon_flush_icache_all)
122 mov r0, #0
123 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
124 ret lr
125 ENDPROC(feroceon_flush_icache_all)
127 /*
128 * flush_user_cache_all()
129 *
130 * Clean and invalidate all cache entries in a particular
131 * address space.
132 */
133 .align 5
134 ENTRY(feroceon_flush_user_cache_all)
135 /* FALLTHROUGH */
137 /*
138 * flush_kern_cache_all()
139 *
140 * Clean and invalidate the entire cache.
141 */
142 ENTRY(feroceon_flush_kern_cache_all)
143 mov r2, #VM_EXEC
145 __flush_whole_cache:
146 ldr r1, __cache_params
147 ldmia r1, {r1, r3}
148 1: orr ip, r1, r3
149 2: mcr p15, 0, ip, c7, c14, 2 @ clean + invalidate D set/way
150 subs ip, ip, #(1 << 30) @ next way
151 bcs 2b
152 subs r1, r1, #(1 << 5) @ next set
153 bcs 1b
155 tst r2, #VM_EXEC
156 mov ip, #0
157 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
158 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
159 ret lr
161 /*
162 * flush_user_cache_range(start, end, flags)
163 *
164 * Clean and invalidate a range of cache entries in the
165 * specified address range.
166 *
167 * - start - start address (inclusive)
168 * - end - end address (exclusive)
169 * - flags - vm_flags describing address space
170 */
171 .align 5
172 ENTRY(feroceon_flush_user_cache_range)
173 sub r3, r1, r0 @ calculate total size
174 cmp r3, #CACHE_DLIMIT
175 bgt __flush_whole_cache
176 1: tst r2, #VM_EXEC
177 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
178 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
179 add r0, r0, #CACHE_DLINESIZE
180 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
181 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
182 add r0, r0, #CACHE_DLINESIZE
183 cmp r0, r1
184 blo 1b
185 tst r2, #VM_EXEC
186 mov ip, #0
187 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
188 ret lr
190 /*
191 * coherent_kern_range(start, end)
192 *
193 * Ensure coherency between the Icache and the Dcache in the
194 * region described by start, end. If you have non-snooping
195 * Harvard caches, you need to implement this function.
196 *
197 * - start - virtual start address
198 * - end - virtual end address
199 */
200 .align 5
201 ENTRY(feroceon_coherent_kern_range)
202 /* FALLTHROUGH */
204 /*
205 * coherent_user_range(start, end)
206 *
207 * Ensure coherency between the Icache and the Dcache in the
208 * region described by start, end. If you have non-snooping
209 * Harvard caches, you need to implement this function.
210 *
211 * - start - virtual start address
212 * - end - virtual end address
213 */
214 ENTRY(feroceon_coherent_user_range)
215 bic r0, r0, #CACHE_DLINESIZE - 1
216 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
217 mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
218 add r0, r0, #CACHE_DLINESIZE
219 cmp r0, r1
220 blo 1b
221 mcr p15, 0, r0, c7, c10, 4 @ drain WB
222 mov r0, #0
223 ret lr
225 /*
226 * flush_kern_dcache_area(void *addr, size_t size)
227 *
228 * Ensure no D cache aliasing occurs, either with itself or
229 * the I cache
230 *
231 * - addr - kernel address
232 * - size - region size
233 */
234 .align 5
235 ENTRY(feroceon_flush_kern_dcache_area)
236 add r1, r0, r1
237 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
238 add r0, r0, #CACHE_DLINESIZE
239 cmp r0, r1
240 blo 1b
241 mov r0, #0
242 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
243 mcr p15, 0, r0, c7, c10, 4 @ drain WB
244 ret lr
246 .align 5
247 ENTRY(feroceon_range_flush_kern_dcache_area)
248 mrs r2, cpsr
249 add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive
250 orr r3, r2, #PSR_I_BIT
251 msr cpsr_c, r3 @ disable interrupts
252 mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
253 mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
254 msr cpsr_c, r2 @ restore interrupts
255 mov r0, #0
256 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
257 mcr p15, 0, r0, c7, c10, 4 @ drain WB
258 ret lr
260 /*
261 * dma_inv_range(start, end)
262 *
263 * Invalidate (discard) the specified virtual address range.
264 * May not write back any entries. If 'start' or 'end'
265 * are not cache line aligned, those lines must be written
266 * back.
267 *
268 * - start - virtual start address
269 * - end - virtual end address
270 *
271 * (same as v4wb)
272 */
273 .align 5
274 feroceon_dma_inv_range:
275 tst r0, #CACHE_DLINESIZE - 1
276 bic r0, r0, #CACHE_DLINESIZE - 1
277 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
278 tst r1, #CACHE_DLINESIZE - 1
279 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
280 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
281 add r0, r0, #CACHE_DLINESIZE
282 cmp r0, r1
283 blo 1b
284 mcr p15, 0, r0, c7, c10, 4 @ drain WB
285 ret lr
287 .align 5
288 feroceon_range_dma_inv_range:
289 mrs r2, cpsr
290 tst r0, #CACHE_DLINESIZE - 1
291 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
292 tst r1, #CACHE_DLINESIZE - 1
293 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
294 cmp r1, r0
295 subne r1, r1, #1 @ top address is inclusive
296 orr r3, r2, #PSR_I_BIT
297 msr cpsr_c, r3 @ disable interrupts
298 mcr p15, 5, r0, c15, c14, 0 @ D inv range start
299 mcr p15, 5, r1, c15, c14, 1 @ D inv range top
300 msr cpsr_c, r2 @ restore interrupts
301 ret lr
303 /*
304 * dma_clean_range(start, end)
305 *
306 * Clean the specified virtual address range.
307 *
308 * - start - virtual start address
309 * - end - virtual end address
310 *
311 * (same as v4wb)
312 */
313 .align 5
314 feroceon_dma_clean_range:
315 bic r0, r0, #CACHE_DLINESIZE - 1
316 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
317 add r0, r0, #CACHE_DLINESIZE
318 cmp r0, r1
319 blo 1b
320 mcr p15, 0, r0, c7, c10, 4 @ drain WB
321 ret lr
323 .align 5
324 feroceon_range_dma_clean_range:
325 mrs r2, cpsr
326 cmp r1, r0
327 subne r1, r1, #1 @ top address is inclusive
328 orr r3, r2, #PSR_I_BIT
329 msr cpsr_c, r3 @ disable interrupts
330 mcr p15, 5, r0, c15, c13, 0 @ D clean range start
331 mcr p15, 5, r1, c15, c13, 1 @ D clean range top
332 msr cpsr_c, r2 @ restore interrupts
333 mcr p15, 0, r0, c7, c10, 4 @ drain WB
334 ret lr
336 /*
337 * dma_flush_range(start, end)
338 *
339 * Clean and invalidate the specified virtual address range.
340 *
341 * - start - virtual start address
342 * - end - virtual end address
343 */
344 .align 5
345 ENTRY(feroceon_dma_flush_range)
346 bic r0, r0, #CACHE_DLINESIZE - 1
347 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
348 add r0, r0, #CACHE_DLINESIZE
349 cmp r0, r1
350 blo 1b
351 mcr p15, 0, r0, c7, c10, 4 @ drain WB
352 ret lr
354 .align 5
355 ENTRY(feroceon_range_dma_flush_range)
356 mrs r2, cpsr
357 cmp r1, r0
358 subne r1, r1, #1 @ top address is inclusive
359 orr r3, r2, #PSR_I_BIT
360 msr cpsr_c, r3 @ disable interrupts
361 mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
362 mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
363 msr cpsr_c, r2 @ restore interrupts
364 mcr p15, 0, r0, c7, c10, 4 @ drain WB
365 ret lr
367 /*
368 * dma_map_area(start, size, dir)
369 * - start - kernel virtual start address
370 * - size - size of region
371 * - dir - DMA direction
372 */
373 ENTRY(feroceon_dma_map_area)
374 add r1, r1, r0
375 cmp r2, #DMA_TO_DEVICE
376 beq feroceon_dma_clean_range
377 bcs feroceon_dma_inv_range
378 b feroceon_dma_flush_range
379 ENDPROC(feroceon_dma_map_area)
381 /*
382 * dma_map_area(start, size, dir)
383 * - start - kernel virtual start address
384 * - size - size of region
385 * - dir - DMA direction
386 */
387 ENTRY(feroceon_range_dma_map_area)
388 add r1, r1, r0
389 cmp r2, #DMA_TO_DEVICE
390 beq feroceon_range_dma_clean_range
391 bcs feroceon_range_dma_inv_range
392 b feroceon_range_dma_flush_range
393 ENDPROC(feroceon_range_dma_map_area)
395 /*
396 * dma_unmap_area(start, size, dir)
397 * - start - kernel virtual start address
398 * - size - size of region
399 * - dir - DMA direction
400 */
401 ENTRY(feroceon_dma_unmap_area)
402 ret lr
403 ENDPROC(feroceon_dma_unmap_area)
405 .globl feroceon_flush_kern_cache_louis
406 .equ feroceon_flush_kern_cache_louis, feroceon_flush_kern_cache_all
408 @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
409 define_cache_functions feroceon
411 .macro range_alias basename
412 .globl feroceon_range_\basename
413 .type feroceon_range_\basename , %function
414 .equ feroceon_range_\basename , feroceon_\basename
415 .endm
417 /*
418 * Most of the cache functions are unchanged for this case.
419 * Export suitable alias symbols for the unchanged functions:
420 */
421 range_alias flush_icache_all
422 range_alias flush_user_cache_all
423 range_alias flush_kern_cache_all
424 range_alias flush_kern_cache_louis
425 range_alias flush_user_cache_range
426 range_alias coherent_kern_range
427 range_alias coherent_user_range
428 range_alias dma_unmap_area
430 define_cache_functions feroceon_range
432 .align 5
433 ENTRY(cpu_feroceon_dcache_clean_area)
434 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
435 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
436 mov r2, r0
437 mov r3, r1
438 #endif
439 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
440 add r0, r0, #CACHE_DLINESIZE
441 subs r1, r1, #CACHE_DLINESIZE
442 bhi 1b
443 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
444 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
445 1: mcr p15, 1, r2, c15, c9, 1 @ clean L2 entry
446 add r2, r2, #CACHE_DLINESIZE
447 subs r3, r3, #CACHE_DLINESIZE
448 bhi 1b
449 #endif
450 mcr p15, 0, r0, c7, c10, 4 @ drain WB
451 ret lr
453 /* =============================== PageTable ============================== */
455 /*
456 * cpu_feroceon_switch_mm(pgd)
457 *
458 * Set the translation base pointer to be as described by pgd.
459 *
460 * pgd: new page tables
461 */
462 .align 5
463 ENTRY(cpu_feroceon_switch_mm)
464 #ifdef CONFIG_MMU
465 /*
466 * Note: we wish to call __flush_whole_cache but we need to preserve
467 * lr to do so. The only way without touching main memory is to
468 * use r2 which is normally used to test the VM_EXEC flag, and
469 * compensate locally for the skipped ops if it is not set.
470 */
471 mov r2, lr @ abuse r2 to preserve lr
472 bl __flush_whole_cache
473 @ if r2 contains the VM_EXEC bit then the next 2 ops are done already
474 tst r2, #VM_EXEC
475 mcreq p15, 0, ip, c7, c5, 0 @ invalidate I cache
476 mcreq p15, 0, ip, c7, c10, 4 @ drain WB
478 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
479 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
480 ret r2
481 #else
482 ret lr
483 #endif
485 /*
486 * cpu_feroceon_set_pte_ext(ptep, pte, ext)
487 *
488 * Set a PTE and flush it out
489 */
490 .align 5
491 ENTRY(cpu_feroceon_set_pte_ext)
492 #ifdef CONFIG_MMU
493 armv3_set_pte_ext wc_disable=0
494 mov r0, r0
495 mcr p15, 0, r0, c7, c10, 1 @ clean D entry
496 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
497 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
498 mcr p15, 1, r0, c15, c9, 1 @ clean L2 entry
499 #endif
500 mcr p15, 0, r0, c7, c10, 4 @ drain WB
501 #endif
502 ret lr
504 /* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */
505 .globl cpu_feroceon_suspend_size
506 .equ cpu_feroceon_suspend_size, 4 * 3
507 #ifdef CONFIG_ARM_CPU_SUSPEND
508 ENTRY(cpu_feroceon_do_suspend)
509 stmfd sp!, {r4 - r6, lr}
510 mrc p15, 0, r4, c13, c0, 0 @ PID
511 mrc p15, 0, r5, c3, c0, 0 @ Domain ID
512 mrc p15, 0, r6, c1, c0, 0 @ Control register
513 stmia r0, {r4 - r6}
514 ldmfd sp!, {r4 - r6, pc}
515 ENDPROC(cpu_feroceon_do_suspend)
517 ENTRY(cpu_feroceon_do_resume)
518 mov ip, #0
519 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
520 mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
521 ldmia r0, {r4 - r6}
522 mcr p15, 0, r4, c13, c0, 0 @ PID
523 mcr p15, 0, r5, c3, c0, 0 @ Domain ID
524 mcr p15, 0, r1, c2, c0, 0 @ TTB address
525 mov r0, r6 @ control register
526 b cpu_resume_mmu
527 ENDPROC(cpu_feroceon_do_resume)
528 #endif
530 .type __feroceon_setup, #function
531 __feroceon_setup:
532 mov r0, #0
533 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
534 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
535 #ifdef CONFIG_MMU
536 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
537 #endif
539 adr r5, feroceon_crval
540 ldmia r5, {r5, r6}
541 mrc p15, 0, r0, c1, c0 @ get control register v4
542 bic r0, r0, r5
543 orr r0, r0, r6
544 ret lr
545 .size __feroceon_setup, . - __feroceon_setup
547 /*
548 * B
549 * R P
550 * .RVI UFRS BLDP WCAM
551 * .011 .001 ..11 0101
552 *
553 */
554 .type feroceon_crval, #object
555 feroceon_crval:
556 crval clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
558 __INITDATA
560 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
561 define_processor_functions feroceon, dabort=v5t_early_abort, pabort=legacy_pabort
563 .section ".rodata"
565 string cpu_arch_name, "armv5te"
566 string cpu_elf_name, "v5"
567 string cpu_feroceon_name, "Feroceon"
568 string cpu_88fr531_name, "Feroceon 88FR531-vd"
569 string cpu_88fr571_name, "Feroceon 88FR571-vd"
570 string cpu_88fr131_name, "Feroceon 88FR131"
572 .align
574 .section ".proc.info.init", "a"
576 .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
577 .type __\name\()_proc_info,#object
578 __\name\()_proc_info:
579 .long \cpu_val
580 .long \cpu_mask
581 .long PMD_TYPE_SECT | \
582 PMD_SECT_BUFFERABLE | \
583 PMD_SECT_CACHEABLE | \
584 PMD_BIT4 | \
585 PMD_SECT_AP_WRITE | \
586 PMD_SECT_AP_READ
587 .long PMD_TYPE_SECT | \
588 PMD_BIT4 | \
589 PMD_SECT_AP_WRITE | \
590 PMD_SECT_AP_READ
591 initfn __feroceon_setup, __\name\()_proc_info
592 .long cpu_arch_name
593 .long cpu_elf_name
594 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
595 .long \cpu_name
596 .long feroceon_processor_functions
597 .long v4wbi_tlb_fns
598 .long feroceon_user_fns
599 .long \cache
600 .size __\name\()_proc_info, . - __\name\()_proc_info
601 .endm
603 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
604 feroceon_proc_info feroceon_old_id, 0x41009260, 0xff00fff0, \
605 cpu_name=cpu_feroceon_name, cache=feroceon_cache_fns
606 #endif
608 feroceon_proc_info 88fr531, 0x56055310, 0xfffffff0, cpu_88fr531_name, \
609 cache=feroceon_cache_fns
610 feroceon_proc_info 88fr571, 0x56155710, 0xfffffff0, cpu_88fr571_name, \
611 cache=feroceon_range_cache_fns
612 feroceon_proc_info 88fr131, 0x56251310, 0xfffffff0, cpu_88fr131_name, \
613 cache=feroceon_range_cache_fns