arch/arm/mach-imx/mach-mx27ads.c

   1 /*
   2  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   3  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
   4  *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16 #include <linux/gpio/driver.h>
  17 /* Needed for gpio_to_irq() */
  18 #include <linux/gpio.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/mtd/mtd.h>
  21 #include <linux/mtd/map.h>
  22 #include <linux/mtd/partitions.h>
  23 #include <linux/mtd/physmap.h>
  24 #include <linux/i2c.h>
  25 #include <linux/irq.h>
  26
  27 #include <linux/regulator/fixed.h>
  28 #include <linux/regulator/machine.h>
  29
  30 #include <asm/mach-types.h>
  31 #include <asm/mach/arch.h>
  32 #include <asm/mach/time.h>
  33 #include <asm/mach/map.h>
  34
  35 #include "common.h"
  36 #include "devices-imx27.h"
  37 #include "hardware.h"
  38 #include "iomux-mx27.h"
  39
  40 /*
  41  * Base address of PBC controller, CS4
  42  */
  43 #define PBC_BASE_ADDRESS        0xf4300000
  44 #define PBC_REG_ADDR(offset)    (void __force __iomem *) \
  45                 (PBC_BASE_ADDRESS + (offset))
  46
  47 /* When the PBC address connection is fixed in h/w, defined as 1 */
  48 #define PBC_ADDR_SH             0
  49
  50 /* Offsets for the PBC Controller register */
  51 /*
  52  * PBC Board version register offset
  53  */
  54 #define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
  55 /*
  56  * PBC Board control register 1 set address.
  57  */
  58 #define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
  59 /*
  60  * PBC Board control register 1 clear address.
  61  */
  62 #define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
  63
  64 /* PBC Board Control Register 1 bit definitions */
  65 #define PBC_BCTRL1_LCDON        0x0800  /* Enable the LCD */
  66
  67 /* to determine the correct external crystal reference */
  68 #define CKIH_27MHZ_BIT_SET      (1 << 3)
  69
  70 static const int mx27ads_pins[] __initconst = {
  71         /* UART0 */
  72         PE12_PF_UART1_TXD,
  73         PE13_PF_UART1_RXD,
  74         PE14_PF_UART1_CTS,
  75         PE15_PF_UART1_RTS,
  76         /* UART1 */
  77         PE3_PF_UART2_CTS,
  78         PE4_PF_UART2_RTS,
  79         PE6_PF_UART2_TXD,
  80         PE7_PF_UART2_RXD,
  81         /* UART2 */
  82         PE8_PF_UART3_TXD,
  83         PE9_PF_UART3_RXD,
  84         PE10_PF_UART3_CTS,
  85         PE11_PF_UART3_RTS,
  86         /* UART3 */
  87         PB26_AF_UART4_RTS,
  88         PB28_AF_UART4_TXD,
  89         PB29_AF_UART4_CTS,
  90         PB31_AF_UART4_RXD,
  91         /* UART4 */
  92         PB18_AF_UART5_TXD,
  93         PB19_AF_UART5_RXD,
  94         PB20_AF_UART5_CTS,
  95         PB21_AF_UART5_RTS,
  96         /* UART5 */
  97         PB10_AF_UART6_TXD,
  98         PB12_AF_UART6_CTS,
  99         PB11_AF_UART6_RXD,
 100         PB13_AF_UART6_RTS,
 101         /* FEC */
 102         PD0_AIN_FEC_TXD0,
 103         PD1_AIN_FEC_TXD1,
 104         PD2_AIN_FEC_TXD2,
 105         PD3_AIN_FEC_TXD3,
 106         PD4_AOUT_FEC_RX_ER,
 107         PD5_AOUT_FEC_RXD1,
 108         PD6_AOUT_FEC_RXD2,
 109         PD7_AOUT_FEC_RXD3,
 110         PD8_AF_FEC_MDIO,
 111         PD9_AIN_FEC_MDC,
 112         PD10_AOUT_FEC_CRS,
 113         PD11_AOUT_FEC_TX_CLK,
 114         PD12_AOUT_FEC_RXD0,
 115         PD13_AOUT_FEC_RX_DV,
 116         PD14_AOUT_FEC_RX_CLK,
 117         PD15_AOUT_FEC_COL,
 118         PD16_AIN_FEC_TX_ER,
 119         PF23_AIN_FEC_TX_EN,
 120         /* I2C2 */
 121         PC5_PF_I2C2_SDA,
 122         PC6_PF_I2C2_SCL,
 123         /* FB */
 124         PA5_PF_LSCLK,
 125         PA6_PF_LD0,
 126         PA7_PF_LD1,
 127         PA8_PF_LD2,
 128         PA9_PF_LD3,
 129         PA10_PF_LD4,
 130         PA11_PF_LD5,
 131         PA12_PF_LD6,
 132         PA13_PF_LD7,
 133         PA14_PF_LD8,
 134         PA15_PF_LD9,
 135         PA16_PF_LD10,
 136         PA17_PF_LD11,
 137         PA18_PF_LD12,
 138         PA19_PF_LD13,
 139         PA20_PF_LD14,
 140         PA21_PF_LD15,
 141         PA22_PF_LD16,
 142         PA23_PF_LD17,
 143         PA24_PF_REV,
 144         PA25_PF_CLS,
 145         PA26_PF_PS,
 146         PA27_PF_SPL_SPR,
 147         PA28_PF_HSYNC,
 148         PA29_PF_VSYNC,
 149         PA30_PF_CONTRAST,
 150         PA31_PF_OE_ACD,
 151         /* OWIRE */
 152         PE16_AF_OWIRE,
 153         /* SDHC1*/
 154         PE18_PF_SD1_D0,
 155         PE19_PF_SD1_D1,
 156         PE20_PF_SD1_D2,
 157         PE21_PF_SD1_D3,
 158         PE22_PF_SD1_CMD,
 159         PE23_PF_SD1_CLK,
 160         /* SDHC2*/
 161         PB4_PF_SD2_D0,
 162         PB5_PF_SD2_D1,
 163         PB6_PF_SD2_D2,
 164         PB7_PF_SD2_D3,
 165         PB8_PF_SD2_CMD,
 166         PB9_PF_SD2_CLK,
 167 };
 168
 169 static const struct mxc_nand_platform_data
 170 mx27ads_nand_board_info __initconst = {
 171         .width = 1,
 172         .hw_ecc = 1,
 173 };
 174
 175 /* ADS's NOR flash */
 176 static struct physmap_flash_data mx27ads_flash_data = {
 177         .width = 2,
 178 };
 179
 180 static struct resource mx27ads_flash_resource = {
 181         .start = 0xc0000000,
 182         .end = 0xc0000000 + 0x02000000 - 1,
 183         .flags = IORESOURCE_MEM,
 184
 185 };
 186
 187 static struct platform_device mx27ads_nor_mtd_device = {
 188         .name = "physmap-flash",
 189         .id = 0,
 190         .dev = {
 191                 .platform_data = &mx27ads_flash_data,
 192         },
 193         .num_resources = 1,
 194         .resource = &mx27ads_flash_resource,
 195 };
 196
 197 static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
 198         .bitrate = 100000,
 199 };
 200
 201 static struct i2c_board_info mx27ads_i2c_devices[] = {
 202 };
 203
 204 static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
 205 {
 206         if (value)
 207                 imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
 208         else
 209                 imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 210 }
 211
 212 static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
 213 {
 214         return 0;
 215 }
 216
 217 #define MX27ADS_LCD_GPIO        (6 * 32)
 218
 219 static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
 220         REGULATOR_SUPPLY("lcd", "imx-fb.0");
 221
 222 static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
 223         .constraints    = {
 224                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
 225 },
 226         .consumer_supplies      = &mx27ads_lcd_regulator_consumer,
 227         .num_consumer_supplies  = 1,
 228 };
 229
 230 static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
 231         .supply_name    = "LCD",
 232         .microvolts     = 3300000,
 233         .gpio           = MX27ADS_LCD_GPIO,
 234         .init_data      = &mx27ads_lcd_regulator_init_data,
 235 };
 236
 237 static void __init mx27ads_regulator_init(void)
 238 {
 239         struct gpio_chip *vchip;
 240
 241         vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
 242         vchip->owner            = THIS_MODULE;
 243         vchip->label            = "LCD";
 244         vchip->base             = MX27ADS_LCD_GPIO;
 245         vchip->ngpio            = 1;
 246         vchip->direction_output = vgpio_dir_out;
 247         vchip->set              = vgpio_set;
 248         gpiochip_add_data(vchip, NULL);
 249
 250         platform_device_register_data(NULL, "reg-fixed-voltage",
 251                                       PLATFORM_DEVID_AUTO,
 252                                       &mx27ads_lcd_regulator_pdata,
 253                                       sizeof(mx27ads_lcd_regulator_pdata));
 254 }
 255
 256 static struct imx_fb_videomode mx27ads_modes[] = {
 257         {
 258                 .mode = {
 259                         .name           = "Sharp-LQ035Q7",
 260                         .refresh        = 60,
 261                         .xres           = 240,
 262                         .yres           = 320,
 263                         .pixclock       = 188679, /* in ps (5.3MHz) */
 264                         .hsync_len      = 1,
 265                         .left_margin    = 9,
 266                         .right_margin   = 16,
 267                         .vsync_len      = 1,
 268                         .upper_margin   = 7,
 269                         .lower_margin   = 9,
 270                 },
 271                 .bpp            = 16,
 272                 .pcr            = 0xFB008BC0,
 273         },
 274 };
 275
 276 static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
 277         .mode = mx27ads_modes,
 278         .num_modes = ARRAY_SIZE(mx27ads_modes),
 279
 280         /*
 281          * - HSYNC active high
 282          * - VSYNC active high
 283          * - clk notenabled while idle
 284          * - clock inverted
 285          * - data not inverted
 286          * - data enable low active
 287          * - enable sharp mode
 288          */
 289         .pwmr           = 0x00A903FF,
 290         .lscr1          = 0x00120300,
 291         .dmacr          = 0x00020010,
 292 };
 293
 294 static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 295                               void *data)
 296 {
 297         return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
 298                            IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
 299 }
 300
 301 static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 302                               void *data)
 303 {
 304         return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
 305                            IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
 306 }
 307
 308 static void mx27ads_sdhc1_exit(struct device *dev, void *data)
 309 {
 310         free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
 311 }
 312
 313 static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 314 {
 315         free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
 316 }
 317
 318 static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 319         .init = mx27ads_sdhc1_init,
 320         .exit = mx27ads_sdhc1_exit,
 321 };
 322
 323 static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 324         .init = mx27ads_sdhc2_init,
 325         .exit = mx27ads_sdhc2_exit,
 326 };
 327
 328 static struct platform_device *platform_devices[] __initdata = {
 329         &mx27ads_nor_mtd_device,
 330 };
 331
 332 static const struct imxuart_platform_data uart_pdata __initconst = {
 333         .flags = IMXUART_HAVE_RTSCTS,
 334 };
 335
 336 static void __init mx27ads_board_init(void)
 337 {
 338         imx27_soc_init();
 339
 340         mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
 341                         "mx27ads");
 342
 343         imx27_add_imx_uart0(&uart_pdata);
 344         imx27_add_imx_uart1(&uart_pdata);
 345         imx27_add_imx_uart2(&uart_pdata);
 346         imx27_add_imx_uart3(&uart_pdata);
 347         imx27_add_imx_uart4(&uart_pdata);
 348         imx27_add_imx_uart5(&uart_pdata);
 349         imx27_add_mxc_nand(&mx27ads_nand_board_info);
 350
 351         /* only the i2c master 1 is used on this CPU card */
 352         i2c_register_board_info(1, mx27ads_i2c_devices,
 353                                 ARRAY_SIZE(mx27ads_i2c_devices));
 354         imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
 355         imx27_add_imx_fb(&mx27ads_fb_data);
 356
 357         imx27_add_fec(NULL);
 358         imx27_add_mxc_w1();
 359 }
 360
 361 static void __init mx27ads_late_init(void)
 362 {
 363         mx27ads_regulator_init();
 364
 365         imx27_add_mxc_mmc(0, &sdhc1_pdata);
 366         imx27_add_mxc_mmc(1, &sdhc2_pdata);
 367
 368         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 369 }
 370
 371 static void __init mx27ads_timer_init(void)
 372 {
 373         unsigned long fref = 26000000;
 374
 375         if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
 376                 fref = 27000000;
 377
 378         mx27_clocks_init(fref);
 379 }
 380
 381 static struct map_desc mx27ads_io_desc[] __initdata = {
 382         {
 383                 .virtual = PBC_BASE_ADDRESS,
 384                 .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
 385                 .length = SZ_1M,
 386                 .type = MT_DEVICE,
 387         },
 388 };
 389
 390 static void __init mx27ads_map_io(void)
 391 {
 392         mx27_map_io();
 393         iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
 394 }
 395
 396 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 397         /* maintainer: Freescale Semiconductor, Inc. */
 398         .atag_offset = 0x100,
 399         .map_io = mx27ads_map_io,
 400         .init_early = imx27_init_early,
 401         .init_irq = mx27_init_irq,
 402         .init_time      = mx27ads_timer_init,
 403         .init_machine = mx27ads_board_init,
 404         .init_late      = mx27ads_late_init,
 405         .restart        = mxc_restart,
 406 MACHINE_END