arch/arm/mach-omap2/control.c

   1 /*
   2  * OMAP2/3 System Control Module register access
   3  *
   4  * Copyright (C) 2007, 2012 Texas Instruments, Inc.
   5  * Copyright (C) 2007 Nokia Corporation
   6  *
   7  * Written by Paul Walmsley
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13 #undef DEBUG
  14
  15 #include <linux/kernel.h>
  16 #include <linux/io.h>
  17 #include <linux/of_address.h>
  18 #include <linux/regmap.h>
  19 #include <linux/mfd/syscon.h>
  20
  21 #include "soc.h"
  22 #include "iomap.h"
  23 #include "common.h"
  24 #include "cm-regbits-34xx.h"
  25 #include "prm-regbits-34xx.h"
  26 #include "prm3xxx.h"
  27 #include "cm3xxx.h"
  28 #include "sdrc.h"
  29 #include "pm.h"
  30 #include "control.h"
  31 #include "clock.h"
  32
  33 /* Used by omap3_ctrl_save_padconf() */
  34 #define START_PADCONF_SAVE              0x2
  35 #define PADCONF_SAVE_DONE               0x1
  36
  37 static void __iomem *omap2_ctrl_base;
  38 static s16 omap2_ctrl_offset;
  39
  40 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
  41 struct omap3_scratchpad {
  42         u32 boot_config_ptr;
  43         u32 public_restore_ptr;
  44         u32 secure_ram_restore_ptr;
  45         u32 sdrc_module_semaphore;
  46         u32 prcm_block_offset;
  47         u32 sdrc_block_offset;
  48 };
  49
  50 struct omap3_scratchpad_prcm_block {
  51         u32 prm_contents[2];
  52         u32 cm_contents[11];
  53         u32 prcm_block_size;
  54 };
  55
  56 struct omap3_scratchpad_sdrc_block {
  57         u16 sysconfig;
  58         u16 cs_cfg;
  59         u16 sharing;
  60         u16 err_type;
  61         u32 dll_a_ctrl;
  62         u32 dll_b_ctrl;
  63         u32 power;
  64         u32 cs_0;
  65         u32 mcfg_0;
  66         u16 mr_0;
  67         u16 emr_1_0;
  68         u16 emr_2_0;
  69         u16 emr_3_0;
  70         u32 actim_ctrla_0;
  71         u32 actim_ctrlb_0;
  72         u32 rfr_ctrl_0;
  73         u32 cs_1;
  74         u32 mcfg_1;
  75         u16 mr_1;
  76         u16 emr_1_1;
  77         u16 emr_2_1;
  78         u16 emr_3_1;
  79         u32 actim_ctrla_1;
  80         u32 actim_ctrlb_1;
  81         u32 rfr_ctrl_1;
  82         u16 dcdl_1_ctrl;
  83         u16 dcdl_2_ctrl;
  84         u32 flags;
  85         u32 block_size;
  86 };
  87
  88 void *omap3_secure_ram_storage;
  89
  90 /*
  91  * This is used to store ARM registers in SDRAM before attempting
  92  * an MPU OFF. The save and restore happens from the SRAM sleep code.
  93  * The address is stored in scratchpad, so that it can be used
  94  * during the restore path.
  95  */
  96 u32 omap3_arm_context[128];
  97
  98 struct omap3_control_regs {
  99         u32 sysconfig;
 100         u32 devconf0;
 101         u32 mem_dftrw0;
 102         u32 mem_dftrw1;
 103         u32 msuspendmux_0;
 104         u32 msuspendmux_1;
 105         u32 msuspendmux_2;
 106         u32 msuspendmux_3;
 107         u32 msuspendmux_4;
 108         u32 msuspendmux_5;
 109         u32 sec_ctrl;
 110         u32 devconf1;
 111         u32 csirxfe;
 112         u32 iva2_bootaddr;
 113         u32 iva2_bootmod;
 114         u32 wkup_ctrl;
 115         u32 debobs_0;
 116         u32 debobs_1;
 117         u32 debobs_2;
 118         u32 debobs_3;
 119         u32 debobs_4;
 120         u32 debobs_5;
 121         u32 debobs_6;
 122         u32 debobs_7;
 123         u32 debobs_8;
 124         u32 prog_io0;
 125         u32 prog_io1;
 126         u32 dss_dpll_spreading;
 127         u32 core_dpll_spreading;
 128         u32 per_dpll_spreading;
 129         u32 usbhost_dpll_spreading;
 130         u32 pbias_lite;
 131         u32 temp_sensor;
 132         u32 sramldo4;
 133         u32 sramldo5;
 134         u32 csi;
 135         u32 padconf_sys_nirq;
 136 };
 137
 138 static struct omap3_control_regs control_context;
 139 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 140
 141 void __init omap2_set_globals_control(void __iomem *ctrl)
 142 {
 143         omap2_ctrl_base = ctrl;
 144 }
 145
 146 u8 omap_ctrl_readb(u16 offset)
 147 {
 148         u32 val;
 149         u8 byte_offset = offset & 0x3;
 150
 151         val = omap_ctrl_readl(offset);
 152
 153         return (val >> (byte_offset * 8)) & 0xff;
 154 }
 155
 156 u16 omap_ctrl_readw(u16 offset)
 157 {
 158         u32 val;
 159         u16 byte_offset = offset & 0x2;
 160
 161         val = omap_ctrl_readl(offset);
 162
 163         return (val >> (byte_offset * 8)) & 0xffff;
 164 }
 165
 166 u32 omap_ctrl_readl(u16 offset)
 167 {
 168         offset &= 0xfffc;
 169
 170         return readl_relaxed(omap2_ctrl_base + offset);
 171 }
 172
 173 void omap_ctrl_writeb(u8 val, u16 offset)
 174 {
 175         u32 tmp;
 176         u8 byte_offset = offset & 0x3;
 177
 178         tmp = omap_ctrl_readl(offset);
 179
 180         tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
 181         tmp |= val << (byte_offset * 8);
 182
 183         omap_ctrl_writel(tmp, offset);
 184 }
 185
 186 void omap_ctrl_writew(u16 val, u16 offset)
 187 {
 188         u32 tmp;
 189         u8 byte_offset = offset & 0x2;
 190
 191         tmp = omap_ctrl_readl(offset);
 192
 193         tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
 194         tmp |= val << (byte_offset * 8);
 195
 196         omap_ctrl_writel(tmp, offset);
 197 }
 198
 199 void omap_ctrl_writel(u32 val, u16 offset)
 200 {
 201         offset &= 0xfffc;
 202         writel_relaxed(val, omap2_ctrl_base + offset);
 203 }
 204
 205 #ifdef CONFIG_ARCH_OMAP3
 206
 207 /**
 208  * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
 209  * @bootmode: 8-bit value to pass to some boot code
 210  *
 211  * Set the bootmode in the scratchpad RAM.  This is used after the
 212  * system restarts.  Not sure what actually uses this - it may be the
 213  * bootloader, rather than the boot ROM - contrary to the preserved
 214  * comment below.  No return value.
 215  */
 216 void omap3_ctrl_write_boot_mode(u8 bootmode)
 217 {
 218         u32 l;
 219
 220         l = ('B' << 24) | ('M' << 16) | bootmode;
 221
 222         /*
 223          * Reserve the first word in scratchpad for communicating
 224          * with the boot ROM. A pointer to a data structure
 225          * describing the boot process can be stored there,
 226          * cf. OMAP34xx TRM, Initialization / Software Booting
 227          * Configuration.
 228          *
 229          * XXX This should use some omap_ctrl_writel()-type function
 230          */
 231         writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
 232 }
 233
 234 #endif
 235
 236 /**
 237  * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
 238  * @bootaddr: physical address of the boot loader
 239  *
 240  * Set boot address for the boot loader of a supported processor
 241  * when a power ON sequence occurs.
 242  */
 243 void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
 244 {
 245         u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
 246                      cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
 247                      cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
 248                      soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
 249                      0;
 250
 251         if (!offset) {
 252                 pr_err("%s: unsupported omap type\n", __func__);
 253                 return;
 254         }
 255
 256         omap_ctrl_writel(bootaddr, offset);
 257 }
 258
 259 /**
 260  * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
 261  * @bootmode: 8-bit value to pass to some boot code
 262  *
 263  * Sets boot mode for the boot loader of a supported processor
 264  * when a power ON sequence occurs.
 265  */
 266 void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
 267 {
 268         u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
 269                      cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
 270                      0;
 271
 272         if (!offset) {
 273                 pr_err("%s: unsupported omap type\n", __func__);
 274                 return;
 275         }
 276
 277         omap_ctrl_writel(bootmode, offset);
 278 }
 279
 280 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 281 /*
 282  * Clears the scratchpad contents in case of cold boot-
 283  * called during bootup
 284  */
 285 void omap3_clear_scratchpad_contents(void)
 286 {
 287         u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
 288         void __iomem *v_addr;
 289         u32 offset = 0;
 290
 291         v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
 292         if (omap3xxx_prm_clear_global_cold_reset()) {
 293                 for ( ; offset <= max_offset; offset += 0x4)
 294                         writel_relaxed(0x0, (v_addr + offset));
 295         }
 296 }
 297
 298 /* Populate the scratchpad structure with restore structure */
 299 void omap3_save_scratchpad_contents(void)
 300 {
 301         void  __iomem *scratchpad_address;
 302         u32 arm_context_addr;
 303         struct omap3_scratchpad scratchpad_contents;
 304         struct omap3_scratchpad_prcm_block prcm_block_contents;
 305         struct omap3_scratchpad_sdrc_block sdrc_block_contents;
 306
 307         /*
 308          * Populate the Scratchpad contents
 309          *
 310          * The "get_*restore_pointer" functions are used to provide a
 311          * physical restore address where the ROM code jumps while waking
 312          * up from MPU OFF/OSWR state.
 313          * The restore pointer is stored into the scratchpad.
 314          */
 315         scratchpad_contents.boot_config_ptr = 0x0;
 316         if (cpu_is_omap3630())
 317                 scratchpad_contents.public_restore_ptr =
 318                         __pa_symbol(omap3_restore_3630);
 319         else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 320                                         omap_rev() != OMAP3430_REV_ES3_1 &&
 321                                         omap_rev() != OMAP3430_REV_ES3_1_2)
 322                 scratchpad_contents.public_restore_ptr =
 323                         __pa_symbol(omap3_restore);
 324         else
 325                 scratchpad_contents.public_restore_ptr =
 326                         __pa_symbol(omap3_restore_es3);
 327
 328         if (omap_type() == OMAP2_DEVICE_TYPE_GP)
 329                 scratchpad_contents.secure_ram_restore_ptr = 0x0;
 330         else
 331                 scratchpad_contents.secure_ram_restore_ptr =
 332                         (u32) __pa(omap3_secure_ram_storage);
 333         scratchpad_contents.sdrc_module_semaphore = 0x0;
 334         scratchpad_contents.prcm_block_offset = 0x2C;
 335         scratchpad_contents.sdrc_block_offset = 0x64;
 336
 337         /* Populate the PRCM block contents */
 338         omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
 339         omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
 340
 341         prcm_block_contents.prcm_block_size = 0x0;
 342
 343         /* Populate the SDRC block contents */
 344         sdrc_block_contents.sysconfig =
 345                         (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
 346         sdrc_block_contents.cs_cfg =
 347                         (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
 348         sdrc_block_contents.sharing =
 349                         (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
 350         sdrc_block_contents.err_type =
 351                         (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
 352         sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
 353         sdrc_block_contents.dll_b_ctrl = 0x0;
 354         /*
 355          * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
 356          * be programed to issue automatic self refresh on timeout
 357          * of AUTO_CNT = 1 prior to any transition to OFF mode.
 358          */
 359         if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
 360                         && (omap_rev() >= OMAP3430_REV_ES3_0))
 361                 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
 362                                 ~(SDRC_POWER_AUTOCOUNT_MASK|
 363                                 SDRC_POWER_CLKCTRL_MASK)) |
 364                                 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
 365                                 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
 366         else
 367                 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
 368
 369         sdrc_block_contents.cs_0 = 0x0;
 370         sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
 371         sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
 372         sdrc_block_contents.emr_1_0 = 0x0;
 373         sdrc_block_contents.emr_2_0 = 0x0;
 374         sdrc_block_contents.emr_3_0 = 0x0;
 375         sdrc_block_contents.actim_ctrla_0 =
 376                         sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
 377         sdrc_block_contents.actim_ctrlb_0 =
 378                         sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
 379         sdrc_block_contents.rfr_ctrl_0 =
 380                         sdrc_read_reg(SDRC_RFR_CTRL_0);
 381         sdrc_block_contents.cs_1 = 0x0;
 382         sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
 383         sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
 384         sdrc_block_contents.emr_1_1 = 0x0;
 385         sdrc_block_contents.emr_2_1 = 0x0;
 386         sdrc_block_contents.emr_3_1 = 0x0;
 387         sdrc_block_contents.actim_ctrla_1 =
 388                         sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
 389         sdrc_block_contents.actim_ctrlb_1 =
 390                         sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
 391         sdrc_block_contents.rfr_ctrl_1 =
 392                         sdrc_read_reg(SDRC_RFR_CTRL_1);
 393         sdrc_block_contents.dcdl_1_ctrl = 0x0;
 394         sdrc_block_contents.dcdl_2_ctrl = 0x0;
 395         sdrc_block_contents.flags = 0x0;
 396         sdrc_block_contents.block_size = 0x0;
 397
 398         arm_context_addr = __pa_symbol(omap3_arm_context);
 399
 400         /* Copy all the contents to the scratchpad location */
 401         scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
 402         memcpy_toio(scratchpad_address, &scratchpad_contents,
 403                  sizeof(scratchpad_contents));
 404         /* Scratchpad contents being 32 bits, a divide by 4 done here */
 405         memcpy_toio(scratchpad_address +
 406                 scratchpad_contents.prcm_block_offset,
 407                 &prcm_block_contents, sizeof(prcm_block_contents));
 408         memcpy_toio(scratchpad_address +
 409                 scratchpad_contents.sdrc_block_offset,
 410                 &sdrc_block_contents, sizeof(sdrc_block_contents));
 411         /*
 412          * Copies the address of the location in SDRAM where ARM
 413          * registers get saved during a MPU OFF transition.
 414          */
 415         memcpy_toio(scratchpad_address +
 416                 scratchpad_contents.sdrc_block_offset +
 417                 sizeof(sdrc_block_contents), &arm_context_addr, 4);
 418 }
 419
 420 void omap3_control_save_context(void)
 421 {
 422         control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
 423         control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 424         control_context.mem_dftrw0 =
 425                         omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
 426         control_context.mem_dftrw1 =
 427                         omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
 428         control_context.msuspendmux_0 =
 429                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
 430         control_context.msuspendmux_1 =
 431                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
 432         control_context.msuspendmux_2 =
 433                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
 434         control_context.msuspendmux_3 =
 435                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
 436         control_context.msuspendmux_4 =
 437                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
 438         control_context.msuspendmux_5 =
 439                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
 440         control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
 441         control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
 442         control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
 443         control_context.iva2_bootaddr =
 444                         omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
 445         control_context.iva2_bootmod =
 446                         omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
 447         control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
 448         control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
 449         control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
 450         control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
 451         control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
 452         control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
 453         control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
 454         control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
 455         control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
 456         control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
 457         control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
 458         control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
 459         control_context.dss_dpll_spreading =
 460                         omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
 461         control_context.core_dpll_spreading =
 462                         omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
 463         control_context.per_dpll_spreading =
 464                         omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
 465         control_context.usbhost_dpll_spreading =
 466                 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
 467         control_context.pbias_lite =
 468                         omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
 469         control_context.temp_sensor =
 470                         omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
 471         control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
 472         control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
 473         control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
 474         control_context.padconf_sys_nirq =
 475                 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
 476 }
 477
 478 void omap3_control_restore_context(void)
 479 {
 480         omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
 481         omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
 482         omap_ctrl_writel(control_context.mem_dftrw0,
 483                                         OMAP343X_CONTROL_MEM_DFTRW0);
 484         omap_ctrl_writel(control_context.mem_dftrw1,
 485                                         OMAP343X_CONTROL_MEM_DFTRW1);
 486         omap_ctrl_writel(control_context.msuspendmux_0,
 487                                         OMAP2_CONTROL_MSUSPENDMUX_0);
 488         omap_ctrl_writel(control_context.msuspendmux_1,
 489                                         OMAP2_CONTROL_MSUSPENDMUX_1);
 490         omap_ctrl_writel(control_context.msuspendmux_2,
 491                                         OMAP2_CONTROL_MSUSPENDMUX_2);
 492         omap_ctrl_writel(control_context.msuspendmux_3,
 493                                         OMAP2_CONTROL_MSUSPENDMUX_3);
 494         omap_ctrl_writel(control_context.msuspendmux_4,
 495                                         OMAP2_CONTROL_MSUSPENDMUX_4);
 496         omap_ctrl_writel(control_context.msuspendmux_5,
 497                                         OMAP2_CONTROL_MSUSPENDMUX_5);
 498         omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
 499         omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
 500         omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
 501         omap_ctrl_writel(control_context.iva2_bootaddr,
 502                                         OMAP343X_CONTROL_IVA2_BOOTADDR);
 503         omap_ctrl_writel(control_context.iva2_bootmod,
 504                                         OMAP343X_CONTROL_IVA2_BOOTMOD);
 505         omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
 506         omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
 507         omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
 508         omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
 509         omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
 510         omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
 511         omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
 512         omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
 513         omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
 514         omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
 515         omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
 516         omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
 517         omap_ctrl_writel(control_context.dss_dpll_spreading,
 518                                         OMAP343X_CONTROL_DSS_DPLL_SPREADING);
 519         omap_ctrl_writel(control_context.core_dpll_spreading,
 520                                         OMAP343X_CONTROL_CORE_DPLL_SPREADING);
 521         omap_ctrl_writel(control_context.per_dpll_spreading,
 522                                         OMAP343X_CONTROL_PER_DPLL_SPREADING);
 523         omap_ctrl_writel(control_context.usbhost_dpll_spreading,
 524                                 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
 525         omap_ctrl_writel(control_context.pbias_lite,
 526                                         OMAP343X_CONTROL_PBIAS_LITE);
 527         omap_ctrl_writel(control_context.temp_sensor,
 528                                         OMAP343X_CONTROL_TEMP_SENSOR);
 529         omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
 530         omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
 531         omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
 532         omap_ctrl_writel(control_context.padconf_sys_nirq,
 533                          OMAP343X_CONTROL_PADCONF_SYSNIRQ);
 534 }
 535
 536 void omap3630_ctrl_disable_rta(void)
 537 {
 538         if (!cpu_is_omap3630())
 539                 return;
 540         omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
 541 }
 542
 543 /**
 544  * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
 545  *
 546  * Tell the SCM to start saving the padconf registers, then wait for
 547  * the process to complete.  Returns 0 unconditionally, although it
 548  * should also eventually be able to return -ETIMEDOUT, if the save
 549  * does not complete.
 550  *
 551  * XXX This function is missing a timeout.  What should it be?
 552  */
 553 int omap3_ctrl_save_padconf(void)
 554 {
 555         u32 cpo;
 556
 557         /* Save the padconf registers */
 558         cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
 559         cpo |= START_PADCONF_SAVE;
 560         omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
 561
 562         /* wait for the save to complete */
 563         while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
 564                  & PADCONF_SAVE_DONE))
 565                 udelay(1);
 566
 567         return 0;
 568 }
 569
 570 /**
 571  * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
 572  *
 573  * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
 574  * force disable IVA2 so that it does not prevent any low-power states.
 575  */
 576 static void __init omap3_ctrl_set_iva_bootmode_idle(void)
 577 {
 578         omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 579                          OMAP343X_CONTROL_IVA2_BOOTMOD);
 580 }
 581
 582 /**
 583  * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
 584  *
 585  * Sets up the pads controlling the stacked modem in such way that the
 586  * device can enter idle.
 587  */
 588 static void __init omap3_ctrl_setup_d2d_padconf(void)
 589 {
 590         u16 mask, padconf;
 591
 592         /*
 593          * In a stand alone OMAP3430 where there is not a stacked
 594          * modem for the D2D Idle Ack and D2D MStandby must be pulled
 595          * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
 596          * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
 597          */
 598         mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
 599         padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
 600         padconf |= mask;
 601         omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
 602
 603         padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
 604         padconf |= mask;
 605         omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 606 }
 607
 608 /**
 609  * omap3_ctrl_init - does static initializations for control module
 610  *
 611  * Initializes system control module. This sets up the sysconfig autoidle,
 612  * and sets up modem and iva2 so that they can be idled properly.
 613  */
 614 void __init omap3_ctrl_init(void)
 615 {
 616         omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 617
 618         omap3_ctrl_set_iva_bootmode_idle();
 619
 620         omap3_ctrl_setup_d2d_padconf();
 621 }
 622 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 623
 624 struct control_init_data {
 625         int index;
 626         s16 offset;
 627 };
 628
 629 static struct control_init_data ctrl_data = {
 630         .index = TI_CLKM_CTRL,
 631 };
 632
 633 static const struct control_init_data omap2_ctrl_data = {
 634         .index = TI_CLKM_CTRL,
 635         .offset = -OMAP2_CONTROL_GENERAL,
 636 };
 637
 638 static const struct of_device_id omap_scrm_dt_match_table[] = {
 639         { .compatible = "ti,am3-scm", .data = &ctrl_data },
 640         { .compatible = "ti,am4-scm", .data = &ctrl_data },
 641         { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
 642         { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
 643         { .compatible = "ti,dm814-scm", .data = &ctrl_data },
 644         { .compatible = "ti,dm816-scrm", .data = &ctrl_data },
 645         { .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
 646         { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
 647         { .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
 648         { }
 649 };
 650
 651 /**
 652  * omap2_control_base_init - initialize iomappings for the control driver
 653  *
 654  * Detects and initializes the iomappings for the control driver, based
 655  * on the DT data. Returns 0 in success, negative error value
 656  * otherwise.
 657  */
 658 int __init omap2_control_base_init(void)
 659 {
 660         struct device_node *np;
 661         const struct of_device_id *match;
 662         struct control_init_data *data;
 663
 664         for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 665                 data = (struct control_init_data *)match->data;
 666
 667                 omap2_ctrl_base = of_iomap(np, 0);
 668                 if (!omap2_ctrl_base)
 669                         return -ENOMEM;
 670
 671                 omap2_ctrl_offset = data->offset;
 672         }
 673
 674         return 0;
 675 }
 676
 677 /**
 678  * omap_control_init - low level init for the control driver
 679  *
 680  * Initializes the low level clock infrastructure for control driver.
 681  * Returns 0 in success, negative error value in failure.
 682  */
 683 int __init omap_control_init(void)
 684 {
 685         struct device_node *np, *scm_conf;
 686         const struct of_device_id *match;
 687         const struct omap_prcm_init_data *data;
 688         int ret;
 689         struct regmap *syscon;
 690
 691         for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 692                 data = match->data;
 693
 694                 /*
 695                  * Check if we have scm_conf node, if yes, use this to
 696                  * access clock registers.
 697                  */
 698                 scm_conf = of_get_child_by_name(np, "scm_conf");
 699
 700                 if (scm_conf) {
 701                         syscon = syscon_node_to_regmap(scm_conf);
 702
 703                         if (IS_ERR(syscon))
 704                                 return PTR_ERR(syscon);
 705
 706                         if (of_get_child_by_name(scm_conf, "clocks")) {
 707                                 ret = omap2_clk_provider_init(scm_conf,
 708                                                               data->index,
 709                                                               syscon, NULL);
 710                                 if (ret)
 711                                         return ret;
 712                         }
 713                 } else {
 714                         /* No scm_conf found, direct access */
 715                         ret = omap2_clk_provider_init(np, data->index, NULL,
 716                                                       omap2_ctrl_base);
 717                         if (ret)
 718                                 return ret;
 719                 }
 720         }
 721
 722         return 0;
 723 }
 724
 725 /**
 726  * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
 727  *
 728  * Legacy iomap init for clock provider. Needed only by legacy boot mode,
 729  * where the base addresses are not parsed from DT, but still required
 730  * by the clock driver to be setup properly.
 731  */
 732 void __init omap3_control_legacy_iomap_init(void)
 733 {
 734         omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
 735 }