x86/amd-iommu: Add per IOMMU reference counting
[linux/fpc-iii.git] / drivers / ata / pata_netcell.c
blobf0d52f72f5bb0b9d88800f0db89f4cccba40069f
1 /*
2 * pata_netcell.c - Netcell PATA driver
4 * (c) 2006 Red Hat
5 */
7 #include <linux/kernel.h>
8 #include <linux/module.h>
9 #include <linux/pci.h>
10 #include <linux/init.h>
11 #include <linux/blkdev.h>
12 #include <linux/delay.h>
13 #include <linux/device.h>
14 #include <scsi/scsi_host.h>
15 #include <linux/libata.h>
16 #include <linux/ata.h>
18 #define DRV_NAME "pata_netcell"
19 #define DRV_VERSION "0.1.7"
21 /* No PIO or DMA methods needed for this device */
23 static unsigned int netcell_read_id(struct ata_device *adev,
24 struct ata_taskfile *tf, u16 *id)
26 unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
27 /* Firmware forgets to mark words 85-87 valid */
28 if (err_mask == 0)
29 id[ATA_ID_CSF_DEFAULT] |= 0x4000;
30 return err_mask;
33 static struct scsi_host_template netcell_sht = {
34 ATA_BMDMA_SHT(DRV_NAME),
37 static struct ata_port_operations netcell_ops = {
38 .inherits = &ata_bmdma_port_ops,
39 .cable_detect = ata_cable_80wire,
40 .read_id = netcell_read_id,
44 /**
45 * netcell_init_one - Register Netcell ATA PCI device with kernel services
46 * @pdev: PCI device to register
47 * @ent: Entry in netcell_pci_tbl matching with @pdev
49 * Called from kernel PCI layer.
51 * LOCKING:
52 * Inherited from PCI layer (may sleep).
54 * RETURNS:
55 * Zero on success, or -ERRNO value.
58 static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
60 static int printed_version;
61 static const struct ata_port_info info = {
62 .flags = ATA_FLAG_SLAVE_POSS,
63 /* Actually we don't really care about these as the
64 firmware deals with it */
65 .pio_mask = ATA_PIO4,
66 .mwdma_mask = ATA_MWDMA2,
67 .udma_mask = ATA_UDMA5, /* UDMA 133 */
68 .port_ops = &netcell_ops,
70 const struct ata_port_info *port_info[] = { &info, NULL };
71 int rc;
73 if (!printed_version++)
74 dev_printk(KERN_DEBUG, &pdev->dev,
75 "version " DRV_VERSION "\n");
77 rc = pcim_enable_device(pdev);
78 if (rc)
79 return rc;
81 /* Any chip specific setup/optimisation/messages here */
82 ata_pci_bmdma_clear_simplex(pdev);
84 /* And let the library code do the work */
85 return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
88 static const struct pci_device_id netcell_pci_tbl[] = {
89 { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), },
91 { } /* terminate list */
94 static struct pci_driver netcell_pci_driver = {
95 .name = DRV_NAME,
96 .id_table = netcell_pci_tbl,
97 .probe = netcell_init_one,
98 .remove = ata_pci_remove_one,
99 #ifdef CONFIG_PM
100 .suspend = ata_pci_device_suspend,
101 .resume = ata_pci_device_resume,
102 #endif
105 static int __init netcell_init(void)
107 return pci_register_driver(&netcell_pci_driver);
110 static void __exit netcell_exit(void)
112 pci_unregister_driver(&netcell_pci_driver);
115 module_init(netcell_init);
116 module_exit(netcell_exit);
118 MODULE_AUTHOR("Alan Cox");
119 MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
120 MODULE_LICENSE("GPL");
121 MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
122 MODULE_VERSION(DRV_VERSION);