1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
36 #include "drm_pciids.h"
37 #include <linux/console.h>
38 #include "drm_crtc_helper.h"
40 static int i915_modeset
= -1;
41 module_param_named(modeset
, i915_modeset
, int, 0400);
43 unsigned int i915_fbpercrtc
= 0;
44 module_param_named(fbpercrtc
, i915_fbpercrtc
, int, 0400);
46 unsigned int i915_powersave
= 1;
47 module_param_named(powersave
, i915_powersave
, int, 0400);
49 static struct drm_driver driver
;
51 static struct pci_device_id pciidlist
[] = {
55 #if defined(CONFIG_DRM_I915_KMS)
56 MODULE_DEVICE_TABLE(pci
, pciidlist
);
59 static int i915_suspend(struct drm_device
*dev
, pm_message_t state
)
61 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
63 if (!dev
|| !dev_priv
) {
64 DRM_ERROR("dev: %p, dev_priv: %p\n", dev
, dev_priv
);
65 DRM_ERROR("DRM not initialized, aborting suspend.\n");
69 if (state
.event
== PM_EVENT_PRETHAW
)
72 pci_save_state(dev
->pdev
);
74 /* If KMS is active, we do the leavevt stuff here */
75 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
76 if (i915_gem_idle(dev
))
77 dev_err(&dev
->pdev
->dev
,
78 "GEM idle failed, resume may fail\n");
79 drm_irq_uninstall(dev
);
84 intel_opregion_free(dev
, 1);
86 if (state
.event
== PM_EVENT_SUSPEND
) {
87 /* Shut down the device */
88 pci_disable_device(dev
->pdev
);
89 pci_set_power_state(dev
->pdev
, PCI_D3hot
);
92 /* Modeset on resume, not lid events */
93 dev_priv
->modeset_on_lid
= 0;
98 static int i915_resume(struct drm_device
*dev
)
100 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
103 if (pci_enable_device(dev
->pdev
))
105 pci_set_master(dev
->pdev
);
107 i915_restore_state(dev
);
109 intel_opregion_init(dev
, 1);
111 /* KMS EnterVT equivalent */
112 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
113 mutex_lock(&dev
->struct_mutex
);
114 dev_priv
->mm
.suspended
= 0;
116 ret
= i915_gem_init_ringbuffer(dev
);
119 mutex_unlock(&dev
->struct_mutex
);
121 drm_irq_install(dev
);
123 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
124 /* Resume the modeset for every activated CRTC */
125 drm_helper_resume_force_mode(dev
);
128 dev_priv
->modeset_on_lid
= 0;
134 * i965_reset - reset chip after a hang
135 * @dev: drm device to reset
136 * @flags: reset domains
138 * Reset the chip. Useful if a hang is detected. Returns zero on successful
139 * reset or otherwise an error code.
141 * Procedure is fairly simple:
142 * - reset the chip using the reset reg
143 * - re-init context state
144 * - re-init hardware status page
145 * - re-init ring buffer
146 * - re-init interrupt state
149 int i965_reset(struct drm_device
*dev
, u8 flags
)
151 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
152 unsigned long timeout
;
155 * We really should only reset the display subsystem if we actually
158 bool need_display
= true;
160 mutex_lock(&dev
->struct_mutex
);
165 i915_gem_retire_requests(dev
);
168 i915_save_display(dev
);
170 if (IS_I965G(dev
) || IS_G4X(dev
)) {
172 * Set the domains we want to reset, then the reset bit (bit 0).
173 * Clear the reset bit after a while and wait for hardware status
174 * bit (bit 1) to be set
176 pci_read_config_byte(dev
->pdev
, GDRST
, &gdrst
);
177 pci_write_config_byte(dev
->pdev
, GDRST
, gdrst
| flags
| ((flags
== GDRST_FULL
) ? 0x1 : 0x0));
179 pci_write_config_byte(dev
->pdev
, GDRST
, gdrst
& 0xfe);
181 /* ...we don't want to loop forever though, 500ms should be plenty */
182 timeout
= jiffies
+ msecs_to_jiffies(500);
185 pci_read_config_byte(dev
->pdev
, GDRST
, &gdrst
);
186 } while ((gdrst
& 0x1) && time_after(timeout
, jiffies
));
189 WARN(true, "i915: Failed to reset chip\n");
190 mutex_unlock(&dev
->struct_mutex
);
194 DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
198 /* Ok, now get things going again... */
201 * Everything depends on having the GTT running, so we need to start
202 * there. Fortunately we don't need to do this unless we reset the
203 * chip at a PCI level.
205 * Next we need to restore the context, but we don't use those
208 * Ring buffer needs to be re-initialized in the KMS case, or if X
209 * was running at the time of the reset (i.e. we weren't VT
212 if (drm_core_check_feature(dev
, DRIVER_MODESET
) ||
213 !dev_priv
->mm
.suspended
) {
214 drm_i915_ring_buffer_t
*ring
= &dev_priv
->ring
;
215 struct drm_gem_object
*obj
= ring
->ring_obj
;
216 struct drm_i915_gem_object
*obj_priv
= obj
->driver_private
;
217 dev_priv
->mm
.suspended
= 0;
219 /* Stop the ring if it's running. */
220 I915_WRITE(PRB0_CTL
, 0);
221 I915_WRITE(PRB0_TAIL
, 0);
222 I915_WRITE(PRB0_HEAD
, 0);
224 /* Initialize the ring. */
225 I915_WRITE(PRB0_START
, obj_priv
->gtt_offset
);
227 ((obj
->size
- 4096) & RING_NR_PAGES
) |
230 if (!drm_core_check_feature(dev
, DRIVER_MODESET
))
231 i915_kernel_lost_context(dev
);
233 ring
->head
= I915_READ(PRB0_HEAD
) & HEAD_ADDR
;
234 ring
->tail
= I915_READ(PRB0_TAIL
) & TAIL_ADDR
;
235 ring
->space
= ring
->head
- (ring
->tail
+ 8);
237 ring
->space
+= ring
->Size
;
240 mutex_unlock(&dev
->struct_mutex
);
241 drm_irq_uninstall(dev
);
242 drm_irq_install(dev
);
243 mutex_lock(&dev
->struct_mutex
);
247 * Display needs restore too...
250 i915_restore_display(dev
);
252 mutex_unlock(&dev
->struct_mutex
);
258 i915_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
260 return drm_get_dev(pdev
, ent
, &driver
);
264 i915_pci_remove(struct pci_dev
*pdev
)
266 struct drm_device
*dev
= pci_get_drvdata(pdev
);
272 i915_pci_suspend(struct pci_dev
*pdev
, pm_message_t state
)
274 struct drm_device
*dev
= pci_get_drvdata(pdev
);
276 return i915_suspend(dev
, state
);
280 i915_pci_resume(struct pci_dev
*pdev
)
282 struct drm_device
*dev
= pci_get_drvdata(pdev
);
284 return i915_resume(dev
);
287 static struct vm_operations_struct i915_gem_vm_ops
= {
288 .fault
= i915_gem_fault
,
289 .open
= drm_gem_vm_open
,
290 .close
= drm_gem_vm_close
,
293 static struct drm_driver driver
= {
294 /* don't use mtrr's here, the Xserver or user space app should
295 * deal with them for intel hardware.
298 DRIVER_USE_AGP
| DRIVER_REQUIRE_AGP
| /* DRIVER_USE_MTRR |*/
299 DRIVER_HAVE_IRQ
| DRIVER_IRQ_SHARED
| DRIVER_GEM
,
300 .load
= i915_driver_load
,
301 .unload
= i915_driver_unload
,
302 .open
= i915_driver_open
,
303 .lastclose
= i915_driver_lastclose
,
304 .preclose
= i915_driver_preclose
,
305 .postclose
= i915_driver_postclose
,
306 .suspend
= i915_suspend
,
307 .resume
= i915_resume
,
308 .device_is_agp
= i915_driver_device_is_agp
,
309 .enable_vblank
= i915_enable_vblank
,
310 .disable_vblank
= i915_disable_vblank
,
311 .irq_preinstall
= i915_driver_irq_preinstall
,
312 .irq_postinstall
= i915_driver_irq_postinstall
,
313 .irq_uninstall
= i915_driver_irq_uninstall
,
314 .irq_handler
= i915_driver_irq_handler
,
315 .reclaim_buffers
= drm_core_reclaim_buffers
,
316 .get_map_ofs
= drm_core_get_map_ofs
,
317 .get_reg_ofs
= drm_core_get_reg_ofs
,
318 .master_create
= i915_master_create
,
319 .master_destroy
= i915_master_destroy
,
320 #if defined(CONFIG_DEBUG_FS)
321 .debugfs_init
= i915_debugfs_init
,
322 .debugfs_cleanup
= i915_debugfs_cleanup
,
324 .gem_init_object
= i915_gem_init_object
,
325 .gem_free_object
= i915_gem_free_object
,
326 .gem_vm_ops
= &i915_gem_vm_ops
,
327 .ioctls
= i915_ioctls
,
329 .owner
= THIS_MODULE
,
331 .release
= drm_release
,
333 .mmap
= drm_gem_mmap
,
335 .fasync
= drm_fasync
,
337 .compat_ioctl
= i915_compat_ioctl
,
343 .id_table
= pciidlist
,
344 .probe
= i915_pci_probe
,
345 .remove
= i915_pci_remove
,
347 .resume
= i915_pci_resume
,
348 .suspend
= i915_pci_suspend
,
355 .major
= DRIVER_MAJOR
,
356 .minor
= DRIVER_MINOR
,
357 .patchlevel
= DRIVER_PATCHLEVEL
,
360 static int __init
i915_init(void)
362 driver
.num_ioctls
= i915_max_ioctl
;
364 i915_gem_shrinker_init();
367 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
368 * explicitly disabled with the module pararmeter.
370 * Otherwise, just follow the parameter (defaulting to off).
372 * Allow optional vga_text_mode_force boot option to override
373 * the default behavior.
375 #if defined(CONFIG_DRM_I915_KMS)
376 if (i915_modeset
!= 0)
377 driver
.driver_features
|= DRIVER_MODESET
;
379 if (i915_modeset
== 1)
380 driver
.driver_features
|= DRIVER_MODESET
;
382 #ifdef CONFIG_VGA_CONSOLE
383 if (vgacon_text_force() && i915_modeset
== -1)
384 driver
.driver_features
&= ~DRIVER_MODESET
;
387 return drm_init(&driver
);
390 static void __exit
i915_exit(void)
392 i915_gem_shrinker_exit();
396 module_init(i915_init
);
397 module_exit(i915_exit
);
399 MODULE_AUTHOR(DRIVER_AUTHOR
);
400 MODULE_DESCRIPTION(DRIVER_DESC
);
401 MODULE_LICENSE("GPL and additional rights");