x86/amd-iommu: Add per IOMMU reference counting
[linux/fpc-iii.git] / drivers / macintosh / via-pmu.c
blob6f308a4757ee60dd6aa8acd4881745efc4eb4521
1 /*
2 * Device driver for the via-pmu on Apple Powermacs.
4 * The VIA (versatile interface adapter) interfaces to the PMU,
5 * a 6805 microprocessor core whose primary function is to control
6 * battery charging and system power on the PowerBook 3400 and 2400.
7 * The PMU also controls the ADB (Apple Desktop Bus) which connects
8 * to the keyboard and mouse, as well as the non-volatile RAM
9 * and the RTC (real time clock) chip.
11 * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
12 * Copyright (C) 2001-2002 Benjamin Herrenschmidt
13 * Copyright (C) 2006-2007 Johannes Berg
15 * THIS DRIVER IS BECOMING A TOTAL MESS !
16 * - Cleanup atomically disabling reply to PMU events after
17 * a sleep or a freq. switch
20 #include <stdarg.h>
21 #include <linux/smp_lock.h>
22 #include <linux/types.h>
23 #include <linux/errno.h>
24 #include <linux/kernel.h>
25 #include <linux/delay.h>
26 #include <linux/sched.h>
27 #include <linux/miscdevice.h>
28 #include <linux/blkdev.h>
29 #include <linux/pci.h>
30 #include <linux/slab.h>
31 #include <linux/poll.h>
32 #include <linux/adb.h>
33 #include <linux/pmu.h>
34 #include <linux/cuda.h>
35 #include <linux/module.h>
36 #include <linux/spinlock.h>
37 #include <linux/pm.h>
38 #include <linux/proc_fs.h>
39 #include <linux/init.h>
40 #include <linux/interrupt.h>
41 #include <linux/device.h>
42 #include <linux/sysdev.h>
43 #include <linux/freezer.h>
44 #include <linux/syscalls.h>
45 #include <linux/suspend.h>
46 #include <linux/cpu.h>
47 #include <asm/prom.h>
48 #include <asm/machdep.h>
49 #include <asm/io.h>
50 #include <asm/pgtable.h>
51 #include <asm/system.h>
52 #include <asm/sections.h>
53 #include <asm/irq.h>
54 #include <asm/pmac_feature.h>
55 #include <asm/pmac_pfunc.h>
56 #include <asm/pmac_low_i2c.h>
57 #include <asm/uaccess.h>
58 #include <asm/mmu_context.h>
59 #include <asm/cputable.h>
60 #include <asm/time.h>
61 #include <asm/backlight.h>
63 #include "via-pmu-event.h"
65 /* Some compile options */
66 #undef DEBUG_SLEEP
68 /* Misc minor number allocated for /dev/pmu */
69 #define PMU_MINOR 154
71 /* How many iterations between battery polls */
72 #define BATTERY_POLLING_COUNT 2
74 static volatile unsigned char __iomem *via;
76 /* VIA registers - spaced 0x200 bytes apart */
77 #define RS 0x200 /* skip between registers */
78 #define B 0 /* B-side data */
79 #define A RS /* A-side data */
80 #define DIRB (2*RS) /* B-side direction (1=output) */
81 #define DIRA (3*RS) /* A-side direction (1=output) */
82 #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
83 #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
84 #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
85 #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
86 #define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
87 #define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
88 #define SR (10*RS) /* Shift register */
89 #define ACR (11*RS) /* Auxiliary control register */
90 #define PCR (12*RS) /* Peripheral control register */
91 #define IFR (13*RS) /* Interrupt flag register */
92 #define IER (14*RS) /* Interrupt enable register */
93 #define ANH (15*RS) /* A-side data, no handshake */
95 /* Bits in B data register: both active low */
96 #define TACK 0x08 /* Transfer acknowledge (input) */
97 #define TREQ 0x10 /* Transfer request (output) */
99 /* Bits in ACR */
100 #define SR_CTRL 0x1c /* Shift register control bits */
101 #define SR_EXT 0x0c /* Shift on external clock */
102 #define SR_OUT 0x10 /* Shift out if 1 */
104 /* Bits in IFR and IER */
105 #define IER_SET 0x80 /* set bits in IER */
106 #define IER_CLR 0 /* clear bits in IER */
107 #define SR_INT 0x04 /* Shift register full/empty */
108 #define CB2_INT 0x08
109 #define CB1_INT 0x10 /* transition on CB1 input */
111 static volatile enum pmu_state {
112 idle,
113 sending,
114 intack,
115 reading,
116 reading_intr,
117 locked,
118 } pmu_state;
120 static volatile enum int_data_state {
121 int_data_empty,
122 int_data_fill,
123 int_data_ready,
124 int_data_flush
125 } int_data_state[2] = { int_data_empty, int_data_empty };
127 static struct adb_request *current_req;
128 static struct adb_request *last_req;
129 static struct adb_request *req_awaiting_reply;
130 static unsigned char interrupt_data[2][32];
131 static int interrupt_data_len[2];
132 static int int_data_last;
133 static unsigned char *reply_ptr;
134 static int data_index;
135 static int data_len;
136 static volatile int adb_int_pending;
137 static volatile int disable_poll;
138 static struct device_node *vias;
139 static int pmu_kind = PMU_UNKNOWN;
140 static int pmu_fully_inited;
141 static int pmu_has_adb;
142 static struct device_node *gpio_node;
143 static unsigned char __iomem *gpio_reg;
144 static int gpio_irq = NO_IRQ;
145 static int gpio_irq_enabled = -1;
146 static volatile int pmu_suspended;
147 static spinlock_t pmu_lock;
148 static u8 pmu_intr_mask;
149 static int pmu_version;
150 static int drop_interrupts;
151 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
152 static int option_lid_wakeup = 1;
153 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
154 static unsigned long async_req_locks;
155 static unsigned int pmu_irq_stats[11];
157 static struct proc_dir_entry *proc_pmu_root;
158 static struct proc_dir_entry *proc_pmu_info;
159 static struct proc_dir_entry *proc_pmu_irqstats;
160 static struct proc_dir_entry *proc_pmu_options;
161 static int option_server_mode;
163 int pmu_battery_count;
164 int pmu_cur_battery;
165 unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT;
166 struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
167 static int query_batt_timer = BATTERY_POLLING_COUNT;
168 static struct adb_request batt_req;
169 static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
171 int __fake_sleep;
172 int asleep;
174 #ifdef CONFIG_ADB
175 static int adb_dev_map;
176 static int pmu_adb_flags;
178 static int pmu_probe(void);
179 static int pmu_init(void);
180 static int pmu_send_request(struct adb_request *req, int sync);
181 static int pmu_adb_autopoll(int devs);
182 static int pmu_adb_reset_bus(void);
183 #endif /* CONFIG_ADB */
185 static int init_pmu(void);
186 static void pmu_start(void);
187 static irqreturn_t via_pmu_interrupt(int irq, void *arg);
188 static irqreturn_t gpio1_interrupt(int irq, void *arg);
189 static int proc_get_info(char *page, char **start, off_t off,
190 int count, int *eof, void *data);
191 static int proc_get_irqstats(char *page, char **start, off_t off,
192 int count, int *eof, void *data);
193 static void pmu_pass_intr(unsigned char *data, int len);
194 static int proc_get_batt(char *page, char **start, off_t off,
195 int count, int *eof, void *data);
196 static int proc_read_options(char *page, char **start, off_t off,
197 int count, int *eof, void *data);
198 static int proc_write_options(struct file *file, const char __user *buffer,
199 unsigned long count, void *data);
201 #ifdef CONFIG_ADB
202 struct adb_driver via_pmu_driver = {
203 "PMU",
204 pmu_probe,
205 pmu_init,
206 pmu_send_request,
207 pmu_adb_autopoll,
208 pmu_poll_adb,
209 pmu_adb_reset_bus
211 #endif /* CONFIG_ADB */
213 extern void low_sleep_handler(void);
214 extern void enable_kernel_altivec(void);
215 extern void enable_kernel_fp(void);
217 #ifdef DEBUG_SLEEP
218 int pmu_polled_request(struct adb_request *req);
219 void pmu_blink(int n);
220 #endif
223 * This table indicates for each PMU opcode:
224 * - the number of data bytes to be sent with the command, or -1
225 * if a length byte should be sent,
226 * - the number of response bytes which the PMU will return, or
227 * -1 if it will send a length byte.
229 static const s8 pmu_data_len[256][2] = {
230 /* 0 1 2 3 4 5 6 7 */
231 /*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
232 /*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
233 /*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
234 /*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
235 /*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
236 /*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
237 /*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
238 /*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
239 /*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
240 /*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
241 /*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
242 /*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
243 /*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
244 /*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
245 /*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
246 /*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
247 /*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
248 /*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
249 /*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
250 /*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
251 /*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
252 /*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
253 /*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
254 /*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
255 /*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
256 /*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
257 /*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
258 /*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
259 /*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
260 /*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
261 /*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
262 /*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
265 static char *pbook_type[] = {
266 "Unknown PowerBook",
267 "PowerBook 2400/3400/3500(G3)",
268 "PowerBook G3 Series",
269 "1999 PowerBook G3",
270 "Core99"
273 int __init find_via_pmu(void)
275 u64 taddr;
276 const u32 *reg;
278 if (via != 0)
279 return 1;
280 vias = of_find_node_by_name(NULL, "via-pmu");
281 if (vias == NULL)
282 return 0;
284 reg = of_get_property(vias, "reg", NULL);
285 if (reg == NULL) {
286 printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
287 goto fail;
289 taddr = of_translate_address(vias, reg);
290 if (taddr == OF_BAD_ADDR) {
291 printk(KERN_ERR "via-pmu: Can't translate address !\n");
292 goto fail;
295 spin_lock_init(&pmu_lock);
297 pmu_has_adb = 1;
299 pmu_intr_mask = PMU_INT_PCEJECT |
300 PMU_INT_SNDBRT |
301 PMU_INT_ADB |
302 PMU_INT_TICK;
304 if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
305 || of_device_is_compatible(vias->parent, "ohare")))
306 pmu_kind = PMU_OHARE_BASED;
307 else if (of_device_is_compatible(vias->parent, "paddington"))
308 pmu_kind = PMU_PADDINGTON_BASED;
309 else if (of_device_is_compatible(vias->parent, "heathrow"))
310 pmu_kind = PMU_HEATHROW_BASED;
311 else if (of_device_is_compatible(vias->parent, "Keylargo")
312 || of_device_is_compatible(vias->parent, "K2-Keylargo")) {
313 struct device_node *gpiop;
314 struct device_node *adbp;
315 u64 gaddr = OF_BAD_ADDR;
317 pmu_kind = PMU_KEYLARGO_BASED;
318 adbp = of_find_node_by_type(NULL, "adb");
319 pmu_has_adb = (adbp != NULL);
320 of_node_put(adbp);
321 pmu_intr_mask = PMU_INT_PCEJECT |
322 PMU_INT_SNDBRT |
323 PMU_INT_ADB |
324 PMU_INT_TICK |
325 PMU_INT_ENVIRONMENT;
327 gpiop = of_find_node_by_name(NULL, "gpio");
328 if (gpiop) {
329 reg = of_get_property(gpiop, "reg", NULL);
330 if (reg)
331 gaddr = of_translate_address(gpiop, reg);
332 if (gaddr != OF_BAD_ADDR)
333 gpio_reg = ioremap(gaddr, 0x10);
335 if (gpio_reg == NULL) {
336 printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
337 goto fail_gpio;
339 } else
340 pmu_kind = PMU_UNKNOWN;
342 via = ioremap(taddr, 0x2000);
343 if (via == NULL) {
344 printk(KERN_ERR "via-pmu: Can't map address !\n");
345 goto fail;
348 out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
349 out_8(&via[IFR], 0x7f); /* clear IFR */
351 pmu_state = idle;
353 if (!init_pmu()) {
354 via = NULL;
355 return 0;
358 printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
359 PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
361 sys_ctrler = SYS_CTRLER_PMU;
363 return 1;
364 fail:
365 of_node_put(vias);
366 iounmap(gpio_reg);
367 gpio_reg = NULL;
368 fail_gpio:
369 vias = NULL;
370 return 0;
373 #ifdef CONFIG_ADB
374 static int pmu_probe(void)
376 return vias == NULL? -ENODEV: 0;
379 static int __init pmu_init(void)
381 if (vias == NULL)
382 return -ENODEV;
383 return 0;
385 #endif /* CONFIG_ADB */
388 * We can't wait until pmu_init gets called, that happens too late.
389 * It happens after IDE and SCSI initialization, which can take a few
390 * seconds, and by that time the PMU could have given up on us and
391 * turned us off.
392 * Thus this is called with arch_initcall rather than device_initcall.
394 static int __init via_pmu_start(void)
396 unsigned int irq;
398 if (vias == NULL)
399 return -ENODEV;
401 batt_req.complete = 1;
403 irq = irq_of_parse_and_map(vias, 0);
404 if (irq == NO_IRQ) {
405 printk(KERN_ERR "via-pmu: can't map interrupt\n");
406 return -ENODEV;
408 /* We set IRQF_TIMER because we don't want the interrupt to be disabled
409 * between the 2 passes of driver suspend, we control our own disabling
410 * for that one
412 if (request_irq(irq, via_pmu_interrupt, IRQF_TIMER, "VIA-PMU", (void *)0)) {
413 printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
414 return -ENODEV;
417 if (pmu_kind == PMU_KEYLARGO_BASED) {
418 gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
419 if (gpio_node == NULL)
420 gpio_node = of_find_node_by_name(NULL,
421 "pmu-interrupt");
422 if (gpio_node)
423 gpio_irq = irq_of_parse_and_map(gpio_node, 0);
425 if (gpio_irq != NO_IRQ) {
426 if (request_irq(gpio_irq, gpio1_interrupt, IRQF_TIMER,
427 "GPIO1 ADB", (void *)0))
428 printk(KERN_ERR "pmu: can't get irq %d"
429 " (GPIO1)\n", gpio_irq);
430 else
431 gpio_irq_enabled = 1;
435 /* Enable interrupts */
436 out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
438 pmu_fully_inited = 1;
440 /* Make sure PMU settle down before continuing. This is _very_ important
441 * since the IDE probe may shut interrupts down for quite a bit of time. If
442 * a PMU communication is pending while this happens, the PMU may timeout
443 * Not that on Core99 machines, the PMU keeps sending us environement
444 * messages, we should find a way to either fix IDE or make it call
445 * pmu_suspend() before masking interrupts. This can also happens while
446 * scolling with some fbdevs.
448 do {
449 pmu_poll();
450 } while (pmu_state != idle);
452 return 0;
455 arch_initcall(via_pmu_start);
458 * This has to be done after pci_init, which is a subsys_initcall.
460 static int __init via_pmu_dev_init(void)
462 if (vias == NULL)
463 return -ENODEV;
465 #ifdef CONFIG_PMAC_BACKLIGHT
466 /* Initialize backlight */
467 pmu_backlight_init();
468 #endif
470 #ifdef CONFIG_PPC32
471 if (machine_is_compatible("AAPL,3400/2400") ||
472 machine_is_compatible("AAPL,3500")) {
473 int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
474 NULL, PMAC_MB_INFO_MODEL, 0);
475 pmu_battery_count = 1;
476 if (mb == PMAC_TYPE_COMET)
477 pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
478 else
479 pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
480 } else if (machine_is_compatible("AAPL,PowerBook1998") ||
481 machine_is_compatible("PowerBook1,1")) {
482 pmu_battery_count = 2;
483 pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
484 pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
485 } else {
486 struct device_node* prim =
487 of_find_node_by_name(NULL, "power-mgt");
488 const u32 *prim_info = NULL;
489 if (prim)
490 prim_info = of_get_property(prim, "prim-info", NULL);
491 if (prim_info) {
492 /* Other stuffs here yet unknown */
493 pmu_battery_count = (prim_info[6] >> 16) & 0xff;
494 pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
495 if (pmu_battery_count > 1)
496 pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
498 of_node_put(prim);
500 #endif /* CONFIG_PPC32 */
502 /* Create /proc/pmu */
503 proc_pmu_root = proc_mkdir("pmu", NULL);
504 if (proc_pmu_root) {
505 long i;
507 for (i=0; i<pmu_battery_count; i++) {
508 char title[16];
509 sprintf(title, "battery_%ld", i);
510 proc_pmu_batt[i] = create_proc_read_entry(title, 0, proc_pmu_root,
511 proc_get_batt, (void *)i);
514 proc_pmu_info = create_proc_read_entry("info", 0, proc_pmu_root,
515 proc_get_info, NULL);
516 proc_pmu_irqstats = create_proc_read_entry("interrupts", 0, proc_pmu_root,
517 proc_get_irqstats, NULL);
518 proc_pmu_options = create_proc_entry("options", 0600, proc_pmu_root);
519 if (proc_pmu_options) {
520 proc_pmu_options->read_proc = proc_read_options;
521 proc_pmu_options->write_proc = proc_write_options;
524 return 0;
527 device_initcall(via_pmu_dev_init);
529 static int
530 init_pmu(void)
532 int timeout;
533 struct adb_request req;
535 out_8(&via[B], via[B] | TREQ); /* negate TREQ */
536 out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK); /* TACK in, TREQ out */
538 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
539 timeout = 100000;
540 while (!req.complete) {
541 if (--timeout < 0) {
542 printk(KERN_ERR "init_pmu: no response from PMU\n");
543 return 0;
545 udelay(10);
546 pmu_poll();
549 /* ack all pending interrupts */
550 timeout = 100000;
551 interrupt_data[0][0] = 1;
552 while (interrupt_data[0][0] || pmu_state != idle) {
553 if (--timeout < 0) {
554 printk(KERN_ERR "init_pmu: timed out acking intrs\n");
555 return 0;
557 if (pmu_state == idle)
558 adb_int_pending = 1;
559 via_pmu_interrupt(0, NULL);
560 udelay(10);
563 /* Tell PMU we are ready. */
564 if (pmu_kind == PMU_KEYLARGO_BASED) {
565 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
566 while (!req.complete)
567 pmu_poll();
570 /* Read PMU version */
571 pmu_request(&req, NULL, 1, PMU_GET_VERSION);
572 pmu_wait_complete(&req);
573 if (req.reply_len > 0)
574 pmu_version = req.reply[0];
576 /* Read server mode setting */
577 if (pmu_kind == PMU_KEYLARGO_BASED) {
578 pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
579 PMU_PWR_GET_POWERUP_EVENTS);
580 pmu_wait_complete(&req);
581 if (req.reply_len == 2) {
582 if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
583 option_server_mode = 1;
584 printk(KERN_INFO "via-pmu: Server Mode is %s\n",
585 option_server_mode ? "enabled" : "disabled");
588 return 1;
592 pmu_get_model(void)
594 return pmu_kind;
597 static void pmu_set_server_mode(int server_mode)
599 struct adb_request req;
601 if (pmu_kind != PMU_KEYLARGO_BASED)
602 return;
604 option_server_mode = server_mode;
605 pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
606 pmu_wait_complete(&req);
607 if (req.reply_len < 2)
608 return;
609 if (server_mode)
610 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
611 PMU_PWR_SET_POWERUP_EVENTS,
612 req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
613 else
614 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
615 PMU_PWR_CLR_POWERUP_EVENTS,
616 req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
617 pmu_wait_complete(&req);
620 /* This new version of the code for 2400/3400/3500 powerbooks
621 * is inspired from the implementation in gkrellm-pmu
623 static void
624 done_battery_state_ohare(struct adb_request* req)
626 /* format:
627 * [0] : flags
628 * 0x01 : AC indicator
629 * 0x02 : charging
630 * 0x04 : battery exist
631 * 0x08 :
632 * 0x10 :
633 * 0x20 : full charged
634 * 0x40 : pcharge reset
635 * 0x80 : battery exist
637 * [1][2] : battery voltage
638 * [3] : CPU temperature
639 * [4] : battery temperature
640 * [5] : current
641 * [6][7] : pcharge
642 * --tkoba
644 unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
645 long pcharge, charge, vb, vmax, lmax;
646 long vmax_charging, vmax_charged;
647 long amperage, voltage, time, max;
648 int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
649 NULL, PMAC_MB_INFO_MODEL, 0);
651 if (req->reply[0] & 0x01)
652 pmu_power_flags |= PMU_PWR_AC_PRESENT;
653 else
654 pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
656 if (mb == PMAC_TYPE_COMET) {
657 vmax_charged = 189;
658 vmax_charging = 213;
659 lmax = 6500;
660 } else {
661 vmax_charged = 330;
662 vmax_charging = 330;
663 lmax = 6500;
665 vmax = vmax_charged;
667 /* If battery installed */
668 if (req->reply[0] & 0x04) {
669 bat_flags |= PMU_BATT_PRESENT;
670 if (req->reply[0] & 0x02)
671 bat_flags |= PMU_BATT_CHARGING;
672 vb = (req->reply[1] << 8) | req->reply[2];
673 voltage = (vb * 265 + 72665) / 10;
674 amperage = req->reply[5];
675 if ((req->reply[0] & 0x01) == 0) {
676 if (amperage > 200)
677 vb += ((amperage - 200) * 15)/100;
678 } else if (req->reply[0] & 0x02) {
679 vb = (vb * 97) / 100;
680 vmax = vmax_charging;
682 charge = (100 * vb) / vmax;
683 if (req->reply[0] & 0x40) {
684 pcharge = (req->reply[6] << 8) + req->reply[7];
685 if (pcharge > lmax)
686 pcharge = lmax;
687 pcharge *= 100;
688 pcharge = 100 - pcharge / lmax;
689 if (pcharge < charge)
690 charge = pcharge;
692 if (amperage > 0)
693 time = (charge * 16440) / amperage;
694 else
695 time = 0;
696 max = 100;
697 amperage = -amperage;
698 } else
699 charge = max = amperage = voltage = time = 0;
701 pmu_batteries[pmu_cur_battery].flags = bat_flags;
702 pmu_batteries[pmu_cur_battery].charge = charge;
703 pmu_batteries[pmu_cur_battery].max_charge = max;
704 pmu_batteries[pmu_cur_battery].amperage = amperage;
705 pmu_batteries[pmu_cur_battery].voltage = voltage;
706 pmu_batteries[pmu_cur_battery].time_remaining = time;
708 clear_bit(0, &async_req_locks);
711 static void
712 done_battery_state_smart(struct adb_request* req)
714 /* format:
715 * [0] : format of this structure (known: 3,4,5)
716 * [1] : flags
718 * format 3 & 4:
720 * [2] : charge
721 * [3] : max charge
722 * [4] : current
723 * [5] : voltage
725 * format 5:
727 * [2][3] : charge
728 * [4][5] : max charge
729 * [6][7] : current
730 * [8][9] : voltage
733 unsigned int bat_flags = PMU_BATT_TYPE_SMART;
734 int amperage;
735 unsigned int capa, max, voltage;
737 if (req->reply[1] & 0x01)
738 pmu_power_flags |= PMU_PWR_AC_PRESENT;
739 else
740 pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
743 capa = max = amperage = voltage = 0;
745 if (req->reply[1] & 0x04) {
746 bat_flags |= PMU_BATT_PRESENT;
747 switch(req->reply[0]) {
748 case 3:
749 case 4: capa = req->reply[2];
750 max = req->reply[3];
751 amperage = *((signed char *)&req->reply[4]);
752 voltage = req->reply[5];
753 break;
754 case 5: capa = (req->reply[2] << 8) | req->reply[3];
755 max = (req->reply[4] << 8) | req->reply[5];
756 amperage = *((signed short *)&req->reply[6]);
757 voltage = (req->reply[8] << 8) | req->reply[9];
758 break;
759 default:
760 printk(KERN_WARNING "pmu.c : unrecognized battery info, len: %d, %02x %02x %02x %02x\n",
761 req->reply_len, req->reply[0], req->reply[1], req->reply[2], req->reply[3]);
762 break;
766 if ((req->reply[1] & 0x01) && (amperage > 0))
767 bat_flags |= PMU_BATT_CHARGING;
769 pmu_batteries[pmu_cur_battery].flags = bat_flags;
770 pmu_batteries[pmu_cur_battery].charge = capa;
771 pmu_batteries[pmu_cur_battery].max_charge = max;
772 pmu_batteries[pmu_cur_battery].amperage = amperage;
773 pmu_batteries[pmu_cur_battery].voltage = voltage;
774 if (amperage) {
775 if ((req->reply[1] & 0x01) && (amperage > 0))
776 pmu_batteries[pmu_cur_battery].time_remaining
777 = ((max-capa) * 3600) / amperage;
778 else
779 pmu_batteries[pmu_cur_battery].time_remaining
780 = (capa * 3600) / (-amperage);
781 } else
782 pmu_batteries[pmu_cur_battery].time_remaining = 0;
784 pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
786 clear_bit(0, &async_req_locks);
789 static void
790 query_battery_state(void)
792 if (test_and_set_bit(0, &async_req_locks))
793 return;
794 if (pmu_kind == PMU_OHARE_BASED)
795 pmu_request(&batt_req, done_battery_state_ohare,
796 1, PMU_BATTERY_STATE);
797 else
798 pmu_request(&batt_req, done_battery_state_smart,
799 2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
802 static int
803 proc_get_info(char *page, char **start, off_t off,
804 int count, int *eof, void *data)
806 char* p = page;
808 p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
809 p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
810 p += sprintf(p, "AC Power : %d\n",
811 ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
812 p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
814 return p - page;
817 static int
818 proc_get_irqstats(char *page, char **start, off_t off,
819 int count, int *eof, void *data)
821 int i;
822 char* p = page;
823 static const char *irq_names[] = {
824 "Total CB1 triggered events",
825 "Total GPIO1 triggered events",
826 "PC-Card eject button",
827 "Sound/Brightness button",
828 "ADB message",
829 "Battery state change",
830 "Environment interrupt",
831 "Tick timer",
832 "Ghost interrupt (zero len)",
833 "Empty interrupt (empty mask)",
834 "Max irqs in a row"
837 for (i=0; i<11; i++) {
838 p += sprintf(p, " %2u: %10u (%s)\n",
839 i, pmu_irq_stats[i], irq_names[i]);
841 return p - page;
844 static int
845 proc_get_batt(char *page, char **start, off_t off,
846 int count, int *eof, void *data)
848 long batnum = (long)data;
849 char *p = page;
851 p += sprintf(p, "\n");
852 p += sprintf(p, "flags : %08x\n",
853 pmu_batteries[batnum].flags);
854 p += sprintf(p, "charge : %d\n",
855 pmu_batteries[batnum].charge);
856 p += sprintf(p, "max_charge : %d\n",
857 pmu_batteries[batnum].max_charge);
858 p += sprintf(p, "current : %d\n",
859 pmu_batteries[batnum].amperage);
860 p += sprintf(p, "voltage : %d\n",
861 pmu_batteries[batnum].voltage);
862 p += sprintf(p, "time rem. : %d\n",
863 pmu_batteries[batnum].time_remaining);
865 return p - page;
868 static int
869 proc_read_options(char *page, char **start, off_t off,
870 int count, int *eof, void *data)
872 char *p = page;
874 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
875 if (pmu_kind == PMU_KEYLARGO_BASED &&
876 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
877 p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
878 #endif
879 if (pmu_kind == PMU_KEYLARGO_BASED)
880 p += sprintf(p, "server_mode=%d\n", option_server_mode);
882 return p - page;
885 static int
886 proc_write_options(struct file *file, const char __user *buffer,
887 unsigned long count, void *data)
889 char tmp[33];
890 char *label, *val;
891 unsigned long fcount = count;
893 if (!count)
894 return -EINVAL;
895 if (count > 32)
896 count = 32;
897 if (copy_from_user(tmp, buffer, count))
898 return -EFAULT;
899 tmp[count] = 0;
901 label = tmp;
902 while(*label == ' ')
903 label++;
904 val = label;
905 while(*val && (*val != '=')) {
906 if (*val == ' ')
907 *val = 0;
908 val++;
910 if ((*val) == 0)
911 return -EINVAL;
912 *(val++) = 0;
913 while(*val == ' ')
914 val++;
915 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
916 if (pmu_kind == PMU_KEYLARGO_BASED &&
917 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
918 if (!strcmp(label, "lid_wakeup"))
919 option_lid_wakeup = ((*val) == '1');
920 #endif
921 if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
922 int new_value;
923 new_value = ((*val) == '1');
924 if (new_value != option_server_mode)
925 pmu_set_server_mode(new_value);
927 return fcount;
930 #ifdef CONFIG_ADB
931 /* Send an ADB command */
932 static int pmu_send_request(struct adb_request *req, int sync)
934 int i, ret;
936 if ((vias == NULL) || (!pmu_fully_inited)) {
937 req->complete = 1;
938 return -ENXIO;
941 ret = -EINVAL;
943 switch (req->data[0]) {
944 case PMU_PACKET:
945 for (i = 0; i < req->nbytes - 1; ++i)
946 req->data[i] = req->data[i+1];
947 --req->nbytes;
948 if (pmu_data_len[req->data[0]][1] != 0) {
949 req->reply[0] = ADB_RET_OK;
950 req->reply_len = 1;
951 } else
952 req->reply_len = 0;
953 ret = pmu_queue_request(req);
954 break;
955 case CUDA_PACKET:
956 switch (req->data[1]) {
957 case CUDA_GET_TIME:
958 if (req->nbytes != 2)
959 break;
960 req->data[0] = PMU_READ_RTC;
961 req->nbytes = 1;
962 req->reply_len = 3;
963 req->reply[0] = CUDA_PACKET;
964 req->reply[1] = 0;
965 req->reply[2] = CUDA_GET_TIME;
966 ret = pmu_queue_request(req);
967 break;
968 case CUDA_SET_TIME:
969 if (req->nbytes != 6)
970 break;
971 req->data[0] = PMU_SET_RTC;
972 req->nbytes = 5;
973 for (i = 1; i <= 4; ++i)
974 req->data[i] = req->data[i+1];
975 req->reply_len = 3;
976 req->reply[0] = CUDA_PACKET;
977 req->reply[1] = 0;
978 req->reply[2] = CUDA_SET_TIME;
979 ret = pmu_queue_request(req);
980 break;
982 break;
983 case ADB_PACKET:
984 if (!pmu_has_adb)
985 return -ENXIO;
986 for (i = req->nbytes - 1; i > 1; --i)
987 req->data[i+2] = req->data[i];
988 req->data[3] = req->nbytes - 2;
989 req->data[2] = pmu_adb_flags;
990 /*req->data[1] = req->data[1];*/
991 req->data[0] = PMU_ADB_CMD;
992 req->nbytes += 2;
993 req->reply_expected = 1;
994 req->reply_len = 0;
995 ret = pmu_queue_request(req);
996 break;
998 if (ret) {
999 req->complete = 1;
1000 return ret;
1003 if (sync)
1004 while (!req->complete)
1005 pmu_poll();
1007 return 0;
1010 /* Enable/disable autopolling */
1011 static int __pmu_adb_autopoll(int devs)
1013 struct adb_request req;
1015 if (devs) {
1016 pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
1017 adb_dev_map >> 8, adb_dev_map);
1018 pmu_adb_flags = 2;
1019 } else {
1020 pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
1021 pmu_adb_flags = 0;
1023 while (!req.complete)
1024 pmu_poll();
1025 return 0;
1028 static int pmu_adb_autopoll(int devs)
1030 if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
1031 return -ENXIO;
1033 adb_dev_map = devs;
1034 return __pmu_adb_autopoll(devs);
1037 /* Reset the ADB bus */
1038 static int pmu_adb_reset_bus(void)
1040 struct adb_request req;
1041 int save_autopoll = adb_dev_map;
1043 if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
1044 return -ENXIO;
1046 /* anyone got a better idea?? */
1047 __pmu_adb_autopoll(0);
1049 req.nbytes = 4;
1050 req.done = NULL;
1051 req.data[0] = PMU_ADB_CMD;
1052 req.data[1] = ADB_BUSRESET;
1053 req.data[2] = 0;
1054 req.data[3] = 0;
1055 req.data[4] = 0;
1056 req.reply_len = 0;
1057 req.reply_expected = 1;
1058 if (pmu_queue_request(&req) != 0) {
1059 printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
1060 return -EIO;
1062 pmu_wait_complete(&req);
1064 if (save_autopoll != 0)
1065 __pmu_adb_autopoll(save_autopoll);
1067 return 0;
1069 #endif /* CONFIG_ADB */
1071 /* Construct and send a pmu request */
1073 pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
1074 int nbytes, ...)
1076 va_list list;
1077 int i;
1079 if (vias == NULL)
1080 return -ENXIO;
1082 if (nbytes < 0 || nbytes > 32) {
1083 printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
1084 req->complete = 1;
1085 return -EINVAL;
1087 req->nbytes = nbytes;
1088 req->done = done;
1089 va_start(list, nbytes);
1090 for (i = 0; i < nbytes; ++i)
1091 req->data[i] = va_arg(list, int);
1092 va_end(list);
1093 req->reply_len = 0;
1094 req->reply_expected = 0;
1095 return pmu_queue_request(req);
1099 pmu_queue_request(struct adb_request *req)
1101 unsigned long flags;
1102 int nsend;
1104 if (via == NULL) {
1105 req->complete = 1;
1106 return -ENXIO;
1108 if (req->nbytes <= 0) {
1109 req->complete = 1;
1110 return 0;
1112 nsend = pmu_data_len[req->data[0]][0];
1113 if (nsend >= 0 && req->nbytes != nsend + 1) {
1114 req->complete = 1;
1115 return -EINVAL;
1118 req->next = NULL;
1119 req->sent = 0;
1120 req->complete = 0;
1122 spin_lock_irqsave(&pmu_lock, flags);
1123 if (current_req != 0) {
1124 last_req->next = req;
1125 last_req = req;
1126 } else {
1127 current_req = req;
1128 last_req = req;
1129 if (pmu_state == idle)
1130 pmu_start();
1132 spin_unlock_irqrestore(&pmu_lock, flags);
1134 return 0;
1137 static inline void
1138 wait_for_ack(void)
1140 /* Sightly increased the delay, I had one occurrence of the message
1141 * reported
1143 int timeout = 4000;
1144 while ((in_8(&via[B]) & TACK) == 0) {
1145 if (--timeout < 0) {
1146 printk(KERN_ERR "PMU not responding (!ack)\n");
1147 return;
1149 udelay(10);
1153 /* New PMU seems to be very sensitive to those timings, so we make sure
1154 * PCI is flushed immediately */
1155 static inline void
1156 send_byte(int x)
1158 volatile unsigned char __iomem *v = via;
1160 out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT);
1161 out_8(&v[SR], x);
1162 out_8(&v[B], in_8(&v[B]) & ~TREQ); /* assert TREQ */
1163 (void)in_8(&v[B]);
1166 static inline void
1167 recv_byte(void)
1169 volatile unsigned char __iomem *v = via;
1171 out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT);
1172 in_8(&v[SR]); /* resets SR */
1173 out_8(&v[B], in_8(&v[B]) & ~TREQ);
1174 (void)in_8(&v[B]);
1177 static inline void
1178 pmu_done(struct adb_request *req)
1180 void (*done)(struct adb_request *) = req->done;
1181 mb();
1182 req->complete = 1;
1183 /* Here, we assume that if the request has a done member, the
1184 * struct request will survive to setting req->complete to 1
1186 if (done)
1187 (*done)(req);
1190 static void
1191 pmu_start(void)
1193 struct adb_request *req;
1195 /* assert pmu_state == idle */
1196 /* get the packet to send */
1197 req = current_req;
1198 if (req == 0 || pmu_state != idle
1199 || (/*req->reply_expected && */req_awaiting_reply))
1200 return;
1202 pmu_state = sending;
1203 data_index = 1;
1204 data_len = pmu_data_len[req->data[0]][0];
1206 /* Sounds safer to make sure ACK is high before writing. This helped
1207 * kill a problem with ADB and some iBooks
1209 wait_for_ack();
1210 /* set the shift register to shift out and send a byte */
1211 send_byte(req->data[0]);
1214 void
1215 pmu_poll(void)
1217 if (!via)
1218 return;
1219 if (disable_poll)
1220 return;
1221 via_pmu_interrupt(0, NULL);
1224 void
1225 pmu_poll_adb(void)
1227 if (!via)
1228 return;
1229 if (disable_poll)
1230 return;
1231 /* Kicks ADB read when PMU is suspended */
1232 adb_int_pending = 1;
1233 do {
1234 via_pmu_interrupt(0, NULL);
1235 } while (pmu_suspended && (adb_int_pending || pmu_state != idle
1236 || req_awaiting_reply));
1239 void
1240 pmu_wait_complete(struct adb_request *req)
1242 if (!via)
1243 return;
1244 while((pmu_state != idle && pmu_state != locked) || !req->complete)
1245 via_pmu_interrupt(0, NULL);
1248 /* This function loops until the PMU is idle and prevents it from
1249 * anwsering to ADB interrupts. pmu_request can still be called.
1250 * This is done to avoid spurrious shutdowns when we know we'll have
1251 * interrupts switched off for a long time
1253 void
1254 pmu_suspend(void)
1256 unsigned long flags;
1258 if (!via)
1259 return;
1261 spin_lock_irqsave(&pmu_lock, flags);
1262 pmu_suspended++;
1263 if (pmu_suspended > 1) {
1264 spin_unlock_irqrestore(&pmu_lock, flags);
1265 return;
1268 do {
1269 spin_unlock_irqrestore(&pmu_lock, flags);
1270 if (req_awaiting_reply)
1271 adb_int_pending = 1;
1272 via_pmu_interrupt(0, NULL);
1273 spin_lock_irqsave(&pmu_lock, flags);
1274 if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
1275 if (gpio_irq >= 0)
1276 disable_irq_nosync(gpio_irq);
1277 out_8(&via[IER], CB1_INT | IER_CLR);
1278 spin_unlock_irqrestore(&pmu_lock, flags);
1279 break;
1281 } while (1);
1284 void
1285 pmu_resume(void)
1287 unsigned long flags;
1289 if (!via || (pmu_suspended < 1))
1290 return;
1292 spin_lock_irqsave(&pmu_lock, flags);
1293 pmu_suspended--;
1294 if (pmu_suspended > 0) {
1295 spin_unlock_irqrestore(&pmu_lock, flags);
1296 return;
1298 adb_int_pending = 1;
1299 if (gpio_irq >= 0)
1300 enable_irq(gpio_irq);
1301 out_8(&via[IER], CB1_INT | IER_SET);
1302 spin_unlock_irqrestore(&pmu_lock, flags);
1303 pmu_poll();
1306 /* Interrupt data could be the result data from an ADB cmd */
1307 static void
1308 pmu_handle_data(unsigned char *data, int len)
1310 unsigned char ints, pirq;
1311 int i = 0;
1313 asleep = 0;
1314 if (drop_interrupts || len < 1) {
1315 adb_int_pending = 0;
1316 pmu_irq_stats[8]++;
1317 return;
1320 /* Get PMU interrupt mask */
1321 ints = data[0];
1323 /* Record zero interrupts for stats */
1324 if (ints == 0)
1325 pmu_irq_stats[9]++;
1327 /* Hack to deal with ADB autopoll flag */
1328 if (ints & PMU_INT_ADB)
1329 ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
1331 next:
1333 if (ints == 0) {
1334 if (i > pmu_irq_stats[10])
1335 pmu_irq_stats[10] = i;
1336 return;
1339 for (pirq = 0; pirq < 8; pirq++)
1340 if (ints & (1 << pirq))
1341 break;
1342 pmu_irq_stats[pirq]++;
1343 i++;
1344 ints &= ~(1 << pirq);
1346 /* Note: for some reason, we get an interrupt with len=1,
1347 * data[0]==0 after each normal ADB interrupt, at least
1348 * on the Pismo. Still investigating... --BenH
1350 if ((1 << pirq) & PMU_INT_ADB) {
1351 if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
1352 struct adb_request *req = req_awaiting_reply;
1353 if (req == 0) {
1354 printk(KERN_ERR "PMU: extra ADB reply\n");
1355 return;
1357 req_awaiting_reply = NULL;
1358 if (len <= 2)
1359 req->reply_len = 0;
1360 else {
1361 memcpy(req->reply, data + 1, len - 1);
1362 req->reply_len = len - 1;
1364 pmu_done(req);
1365 } else {
1366 if (len == 4 && data[1] == 0x2c) {
1367 extern int xmon_wants_key, xmon_adb_keycode;
1368 if (xmon_wants_key) {
1369 xmon_adb_keycode = data[2];
1370 return;
1373 #ifdef CONFIG_ADB
1375 * XXX On the [23]400 the PMU gives us an up
1376 * event for keycodes 0x74 or 0x75 when the PC
1377 * card eject buttons are released, so we
1378 * ignore those events.
1380 if (!(pmu_kind == PMU_OHARE_BASED && len == 4
1381 && data[1] == 0x2c && data[3] == 0xff
1382 && (data[2] & ~1) == 0xf4))
1383 adb_input(data+1, len-1, 1);
1384 #endif /* CONFIG_ADB */
1387 /* Sound/brightness button pressed */
1388 else if ((1 << pirq) & PMU_INT_SNDBRT) {
1389 #ifdef CONFIG_PMAC_BACKLIGHT
1390 if (len == 3)
1391 pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
1392 #endif
1394 /* Tick interrupt */
1395 else if ((1 << pirq) & PMU_INT_TICK) {
1396 /* Environement or tick interrupt, query batteries */
1397 if (pmu_battery_count) {
1398 if ((--query_batt_timer) == 0) {
1399 query_battery_state();
1400 query_batt_timer = BATTERY_POLLING_COUNT;
1404 else if ((1 << pirq) & PMU_INT_ENVIRONMENT) {
1405 if (pmu_battery_count)
1406 query_battery_state();
1407 pmu_pass_intr(data, len);
1408 /* len == 6 is probably a bad check. But how do I
1409 * know what PMU versions send what events here? */
1410 if (len == 6) {
1411 via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
1412 via_pmu_event(PMU_EVT_LID, data[1]&1);
1414 } else {
1415 pmu_pass_intr(data, len);
1417 goto next;
1420 static struct adb_request*
1421 pmu_sr_intr(void)
1423 struct adb_request *req;
1424 int bite = 0;
1426 if (via[B] & TREQ) {
1427 printk(KERN_ERR "PMU: spurious SR intr (%x)\n", via[B]);
1428 out_8(&via[IFR], SR_INT);
1429 return NULL;
1431 /* The ack may not yet be low when we get the interrupt */
1432 while ((in_8(&via[B]) & TACK) != 0)
1435 /* if reading grab the byte, and reset the interrupt */
1436 if (pmu_state == reading || pmu_state == reading_intr)
1437 bite = in_8(&via[SR]);
1439 /* reset TREQ and wait for TACK to go high */
1440 out_8(&via[B], in_8(&via[B]) | TREQ);
1441 wait_for_ack();
1443 switch (pmu_state) {
1444 case sending:
1445 req = current_req;
1446 if (data_len < 0) {
1447 data_len = req->nbytes - 1;
1448 send_byte(data_len);
1449 break;
1451 if (data_index <= data_len) {
1452 send_byte(req->data[data_index++]);
1453 break;
1455 req->sent = 1;
1456 data_len = pmu_data_len[req->data[0]][1];
1457 if (data_len == 0) {
1458 pmu_state = idle;
1459 current_req = req->next;
1460 if (req->reply_expected)
1461 req_awaiting_reply = req;
1462 else
1463 return req;
1464 } else {
1465 pmu_state = reading;
1466 data_index = 0;
1467 reply_ptr = req->reply + req->reply_len;
1468 recv_byte();
1470 break;
1472 case intack:
1473 data_index = 0;
1474 data_len = -1;
1475 pmu_state = reading_intr;
1476 reply_ptr = interrupt_data[int_data_last];
1477 recv_byte();
1478 if (gpio_irq >= 0 && !gpio_irq_enabled) {
1479 enable_irq(gpio_irq);
1480 gpio_irq_enabled = 1;
1482 break;
1484 case reading:
1485 case reading_intr:
1486 if (data_len == -1) {
1487 data_len = bite;
1488 if (bite > 32)
1489 printk(KERN_ERR "PMU: bad reply len %d\n", bite);
1490 } else if (data_index < 32) {
1491 reply_ptr[data_index++] = bite;
1493 if (data_index < data_len) {
1494 recv_byte();
1495 break;
1498 if (pmu_state == reading_intr) {
1499 pmu_state = idle;
1500 int_data_state[int_data_last] = int_data_ready;
1501 interrupt_data_len[int_data_last] = data_len;
1502 } else {
1503 req = current_req;
1505 * For PMU sleep and freq change requests, we lock the
1506 * PMU until it's explicitly unlocked. This avoids any
1507 * spurrious event polling getting in
1509 current_req = req->next;
1510 req->reply_len += data_index;
1511 if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
1512 pmu_state = locked;
1513 else
1514 pmu_state = idle;
1515 return req;
1517 break;
1519 default:
1520 printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
1521 pmu_state);
1523 return NULL;
1526 static irqreturn_t
1527 via_pmu_interrupt(int irq, void *arg)
1529 unsigned long flags;
1530 int intr;
1531 int nloop = 0;
1532 int int_data = -1;
1533 struct adb_request *req = NULL;
1534 int handled = 0;
1536 /* This is a bit brutal, we can probably do better */
1537 spin_lock_irqsave(&pmu_lock, flags);
1538 ++disable_poll;
1540 for (;;) {
1541 intr = in_8(&via[IFR]) & (SR_INT | CB1_INT);
1542 if (intr == 0)
1543 break;
1544 handled = 1;
1545 if (++nloop > 1000) {
1546 printk(KERN_DEBUG "PMU: stuck in intr loop, "
1547 "intr=%x, ier=%x pmu_state=%d\n",
1548 intr, in_8(&via[IER]), pmu_state);
1549 break;
1551 out_8(&via[IFR], intr);
1552 if (intr & CB1_INT) {
1553 adb_int_pending = 1;
1554 pmu_irq_stats[0]++;
1556 if (intr & SR_INT) {
1557 req = pmu_sr_intr();
1558 if (req)
1559 break;
1563 recheck:
1564 if (pmu_state == idle) {
1565 if (adb_int_pending) {
1566 if (int_data_state[0] == int_data_empty)
1567 int_data_last = 0;
1568 else if (int_data_state[1] == int_data_empty)
1569 int_data_last = 1;
1570 else
1571 goto no_free_slot;
1572 pmu_state = intack;
1573 int_data_state[int_data_last] = int_data_fill;
1574 /* Sounds safer to make sure ACK is high before writing.
1575 * This helped kill a problem with ADB and some iBooks
1577 wait_for_ack();
1578 send_byte(PMU_INT_ACK);
1579 adb_int_pending = 0;
1580 } else if (current_req)
1581 pmu_start();
1583 no_free_slot:
1584 /* Mark the oldest buffer for flushing */
1585 if (int_data_state[!int_data_last] == int_data_ready) {
1586 int_data_state[!int_data_last] = int_data_flush;
1587 int_data = !int_data_last;
1588 } else if (int_data_state[int_data_last] == int_data_ready) {
1589 int_data_state[int_data_last] = int_data_flush;
1590 int_data = int_data_last;
1592 --disable_poll;
1593 spin_unlock_irqrestore(&pmu_lock, flags);
1595 /* Deal with completed PMU requests outside of the lock */
1596 if (req) {
1597 pmu_done(req);
1598 req = NULL;
1601 /* Deal with interrupt datas outside of the lock */
1602 if (int_data >= 0) {
1603 pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]);
1604 spin_lock_irqsave(&pmu_lock, flags);
1605 ++disable_poll;
1606 int_data_state[int_data] = int_data_empty;
1607 int_data = -1;
1608 goto recheck;
1611 return IRQ_RETVAL(handled);
1614 void
1615 pmu_unlock(void)
1617 unsigned long flags;
1619 spin_lock_irqsave(&pmu_lock, flags);
1620 if (pmu_state == locked)
1621 pmu_state = idle;
1622 adb_int_pending = 1;
1623 spin_unlock_irqrestore(&pmu_lock, flags);
1627 static irqreturn_t
1628 gpio1_interrupt(int irq, void *arg)
1630 unsigned long flags;
1632 if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
1633 spin_lock_irqsave(&pmu_lock, flags);
1634 if (gpio_irq_enabled > 0) {
1635 disable_irq_nosync(gpio_irq);
1636 gpio_irq_enabled = 0;
1638 pmu_irq_stats[1]++;
1639 adb_int_pending = 1;
1640 spin_unlock_irqrestore(&pmu_lock, flags);
1641 via_pmu_interrupt(0, NULL);
1642 return IRQ_HANDLED;
1644 return IRQ_NONE;
1647 void
1648 pmu_enable_irled(int on)
1650 struct adb_request req;
1652 if (vias == NULL)
1653 return ;
1654 if (pmu_kind == PMU_KEYLARGO_BASED)
1655 return ;
1657 pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
1658 (on ? PMU_POW_ON : PMU_POW_OFF));
1659 pmu_wait_complete(&req);
1662 void
1663 pmu_restart(void)
1665 struct adb_request req;
1667 if (via == NULL)
1668 return;
1670 local_irq_disable();
1672 drop_interrupts = 1;
1674 if (pmu_kind != PMU_KEYLARGO_BASED) {
1675 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1676 PMU_INT_TICK );
1677 while(!req.complete)
1678 pmu_poll();
1681 pmu_request(&req, NULL, 1, PMU_RESET);
1682 pmu_wait_complete(&req);
1683 for (;;)
1687 void
1688 pmu_shutdown(void)
1690 struct adb_request req;
1692 if (via == NULL)
1693 return;
1695 local_irq_disable();
1697 drop_interrupts = 1;
1699 if (pmu_kind != PMU_KEYLARGO_BASED) {
1700 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1701 PMU_INT_TICK );
1702 pmu_wait_complete(&req);
1703 } else {
1704 /* Disable server mode on shutdown or we'll just
1705 * wake up again
1707 pmu_set_server_mode(0);
1710 pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
1711 'M', 'A', 'T', 'T');
1712 pmu_wait_complete(&req);
1713 for (;;)
1718 pmu_present(void)
1720 return via != 0;
1723 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
1725 * Put the powerbook to sleep.
1728 static u32 save_via[8];
1730 static void
1731 save_via_state(void)
1733 save_via[0] = in_8(&via[ANH]);
1734 save_via[1] = in_8(&via[DIRA]);
1735 save_via[2] = in_8(&via[B]);
1736 save_via[3] = in_8(&via[DIRB]);
1737 save_via[4] = in_8(&via[PCR]);
1738 save_via[5] = in_8(&via[ACR]);
1739 save_via[6] = in_8(&via[T1CL]);
1740 save_via[7] = in_8(&via[T1CH]);
1742 static void
1743 restore_via_state(void)
1745 out_8(&via[ANH], save_via[0]);
1746 out_8(&via[DIRA], save_via[1]);
1747 out_8(&via[B], save_via[2]);
1748 out_8(&via[DIRB], save_via[3]);
1749 out_8(&via[PCR], save_via[4]);
1750 out_8(&via[ACR], save_via[5]);
1751 out_8(&via[T1CL], save_via[6]);
1752 out_8(&via[T1CH], save_via[7]);
1753 out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
1754 out_8(&via[IFR], 0x7f); /* clear IFR */
1755 out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
1758 #define GRACKLE_PM (1<<7)
1759 #define GRACKLE_DOZE (1<<5)
1760 #define GRACKLE_NAP (1<<4)
1761 #define GRACKLE_SLEEP (1<<3)
1763 static int powerbook_sleep_grackle(void)
1765 unsigned long save_l2cr;
1766 unsigned short pmcr1;
1767 struct adb_request req;
1768 struct pci_dev *grackle;
1770 grackle = pci_get_bus_and_slot(0, 0);
1771 if (!grackle)
1772 return -ENODEV;
1774 /* Turn off various things. Darwin does some retry tests here... */
1775 pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
1776 pmu_wait_complete(&req);
1777 pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1778 PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1779 pmu_wait_complete(&req);
1781 /* For 750, save backside cache setting and disable it */
1782 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
1784 if (!__fake_sleep) {
1785 /* Ask the PMU to put us to sleep */
1786 pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1787 pmu_wait_complete(&req);
1790 /* The VIA is supposed not to be restored correctly*/
1791 save_via_state();
1792 /* We shut down some HW */
1793 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
1795 pci_read_config_word(grackle, 0x70, &pmcr1);
1796 /* Apparently, MacOS uses NAP mode for Grackle ??? */
1797 pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP);
1798 pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
1799 pci_write_config_word(grackle, 0x70, pmcr1);
1801 /* Call low-level ASM sleep handler */
1802 if (__fake_sleep)
1803 mdelay(5000);
1804 else
1805 low_sleep_handler();
1807 /* We're awake again, stop grackle PM */
1808 pci_read_config_word(grackle, 0x70, &pmcr1);
1809 pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP);
1810 pci_write_config_word(grackle, 0x70, pmcr1);
1812 pci_dev_put(grackle);
1814 /* Make sure the PMU is idle */
1815 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
1816 restore_via_state();
1818 /* Restore L2 cache */
1819 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
1820 _set_L2CR(save_l2cr);
1822 /* Restore userland MMU context */
1823 switch_mmu_context(NULL, current->active_mm);
1825 /* Power things up */
1826 pmu_unlock();
1827 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
1828 pmu_wait_complete(&req);
1829 pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
1830 PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
1831 pmu_wait_complete(&req);
1832 pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1833 PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1834 pmu_wait_complete(&req);
1836 return 0;
1839 static int
1840 powerbook_sleep_Core99(void)
1842 unsigned long save_l2cr;
1843 unsigned long save_l3cr;
1844 struct adb_request req;
1846 if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
1847 printk(KERN_ERR "Sleep mode not supported on this machine\n");
1848 return -ENOSYS;
1851 if (num_online_cpus() > 1 || cpu_is_offline(0))
1852 return -EAGAIN;
1854 /* Stop environment and ADB interrupts */
1855 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
1856 pmu_wait_complete(&req);
1858 /* Tell PMU what events will wake us up */
1859 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
1860 0xff, 0xff);
1861 pmu_wait_complete(&req);
1862 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
1863 0, PMU_PWR_WAKEUP_KEY |
1864 (option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
1865 pmu_wait_complete(&req);
1867 /* Save the state of the L2 and L3 caches */
1868 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
1869 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
1871 if (!__fake_sleep) {
1872 /* Ask the PMU to put us to sleep */
1873 pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1874 pmu_wait_complete(&req);
1877 /* The VIA is supposed not to be restored correctly*/
1878 save_via_state();
1880 /* Shut down various ASICs. There's a chance that we can no longer
1881 * talk to the PMU after this, so I moved it to _after_ sending the
1882 * sleep command to it. Still need to be checked.
1884 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
1886 /* Call low-level ASM sleep handler */
1887 if (__fake_sleep)
1888 mdelay(5000);
1889 else
1890 low_sleep_handler();
1892 /* Restore Apple core ASICs state */
1893 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
1895 /* Restore VIA */
1896 restore_via_state();
1898 /* tweak LPJ before cpufreq is there */
1899 loops_per_jiffy *= 2;
1901 /* Restore video */
1902 pmac_call_early_video_resume();
1904 /* Restore L2 cache */
1905 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
1906 _set_L2CR(save_l2cr);
1907 /* Restore L3 cache */
1908 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
1909 _set_L3CR(save_l3cr);
1911 /* Restore userland MMU context */
1912 switch_mmu_context(NULL, current->active_mm);
1914 /* Tell PMU we are ready */
1915 pmu_unlock();
1916 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
1917 pmu_wait_complete(&req);
1918 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
1919 pmu_wait_complete(&req);
1921 /* Restore LPJ, cpufreq will adjust the cpu frequency */
1922 loops_per_jiffy /= 2;
1924 return 0;
1927 #define PB3400_MEM_CTRL 0xf8000000
1928 #define PB3400_MEM_CTRL_SLEEP 0x70
1930 static void __iomem *pb3400_mem_ctrl;
1932 static void powerbook_sleep_init_3400(void)
1934 /* map in the memory controller registers */
1935 pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
1936 if (pb3400_mem_ctrl == NULL)
1937 printk(KERN_WARNING "ioremap failed: sleep won't be possible");
1940 static int powerbook_sleep_3400(void)
1942 int i, x;
1943 unsigned int hid0;
1944 unsigned long msr;
1945 struct adb_request sleep_req;
1946 unsigned int __iomem *mem_ctrl_sleep;
1948 if (pb3400_mem_ctrl == NULL)
1949 return -ENOMEM;
1950 mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
1952 /* Set the memory controller to keep the memory refreshed
1953 while we're asleep */
1954 for (i = 0x403f; i >= 0x4000; --i) {
1955 out_be32(mem_ctrl_sleep, i);
1956 do {
1957 x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
1958 } while (x == 0);
1959 if (x >= 0x100)
1960 break;
1963 /* Ask the PMU to put us to sleep */
1964 pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1965 pmu_wait_complete(&sleep_req);
1966 pmu_unlock();
1968 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
1970 asleep = 1;
1972 /* Put the CPU into sleep mode */
1973 hid0 = mfspr(SPRN_HID0);
1974 hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
1975 mtspr(SPRN_HID0, hid0);
1976 local_irq_enable();
1977 msr = mfmsr() | MSR_POW;
1978 while (asleep) {
1979 mb();
1980 mtmsr(msr);
1981 isync();
1983 local_irq_disable();
1985 /* OK, we're awake again, start restoring things */
1986 out_be32(mem_ctrl_sleep, 0x3f);
1987 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
1989 return 0;
1992 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
1995 * Support for /dev/pmu device
1997 #define RB_SIZE 0x10
1998 struct pmu_private {
1999 struct list_head list;
2000 int rb_get;
2001 int rb_put;
2002 struct rb_entry {
2003 unsigned short len;
2004 unsigned char data[16];
2005 } rb_buf[RB_SIZE];
2006 wait_queue_head_t wait;
2007 spinlock_t lock;
2008 #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2009 int backlight_locker;
2010 #endif
2013 static LIST_HEAD(all_pmu_pvt);
2014 static DEFINE_SPINLOCK(all_pvt_lock);
2016 static void
2017 pmu_pass_intr(unsigned char *data, int len)
2019 struct pmu_private *pp;
2020 struct list_head *list;
2021 int i;
2022 unsigned long flags;
2024 if (len > sizeof(pp->rb_buf[0].data))
2025 len = sizeof(pp->rb_buf[0].data);
2026 spin_lock_irqsave(&all_pvt_lock, flags);
2027 for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
2028 pp = list_entry(list, struct pmu_private, list);
2029 spin_lock(&pp->lock);
2030 i = pp->rb_put + 1;
2031 if (i >= RB_SIZE)
2032 i = 0;
2033 if (i != pp->rb_get) {
2034 struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
2035 rp->len = len;
2036 memcpy(rp->data, data, len);
2037 pp->rb_put = i;
2038 wake_up_interruptible(&pp->wait);
2040 spin_unlock(&pp->lock);
2042 spin_unlock_irqrestore(&all_pvt_lock, flags);
2045 static int
2046 pmu_open(struct inode *inode, struct file *file)
2048 struct pmu_private *pp;
2049 unsigned long flags;
2051 pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
2052 if (pp == 0)
2053 return -ENOMEM;
2054 pp->rb_get = pp->rb_put = 0;
2055 spin_lock_init(&pp->lock);
2056 init_waitqueue_head(&pp->wait);
2057 lock_kernel();
2058 spin_lock_irqsave(&all_pvt_lock, flags);
2059 #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2060 pp->backlight_locker = 0;
2061 #endif
2062 list_add(&pp->list, &all_pmu_pvt);
2063 spin_unlock_irqrestore(&all_pvt_lock, flags);
2064 file->private_data = pp;
2065 unlock_kernel();
2066 return 0;
2069 static ssize_t
2070 pmu_read(struct file *file, char __user *buf,
2071 size_t count, loff_t *ppos)
2073 struct pmu_private *pp = file->private_data;
2074 DECLARE_WAITQUEUE(wait, current);
2075 unsigned long flags;
2076 int ret = 0;
2078 if (count < 1 || pp == 0)
2079 return -EINVAL;
2080 if (!access_ok(VERIFY_WRITE, buf, count))
2081 return -EFAULT;
2083 spin_lock_irqsave(&pp->lock, flags);
2084 add_wait_queue(&pp->wait, &wait);
2085 current->state = TASK_INTERRUPTIBLE;
2087 for (;;) {
2088 ret = -EAGAIN;
2089 if (pp->rb_get != pp->rb_put) {
2090 int i = pp->rb_get;
2091 struct rb_entry *rp = &pp->rb_buf[i];
2092 ret = rp->len;
2093 spin_unlock_irqrestore(&pp->lock, flags);
2094 if (ret > count)
2095 ret = count;
2096 if (ret > 0 && copy_to_user(buf, rp->data, ret))
2097 ret = -EFAULT;
2098 if (++i >= RB_SIZE)
2099 i = 0;
2100 spin_lock_irqsave(&pp->lock, flags);
2101 pp->rb_get = i;
2103 if (ret >= 0)
2104 break;
2105 if (file->f_flags & O_NONBLOCK)
2106 break;
2107 ret = -ERESTARTSYS;
2108 if (signal_pending(current))
2109 break;
2110 spin_unlock_irqrestore(&pp->lock, flags);
2111 schedule();
2112 spin_lock_irqsave(&pp->lock, flags);
2114 current->state = TASK_RUNNING;
2115 remove_wait_queue(&pp->wait, &wait);
2116 spin_unlock_irqrestore(&pp->lock, flags);
2118 return ret;
2121 static ssize_t
2122 pmu_write(struct file *file, const char __user *buf,
2123 size_t count, loff_t *ppos)
2125 return 0;
2128 static unsigned int
2129 pmu_fpoll(struct file *filp, poll_table *wait)
2131 struct pmu_private *pp = filp->private_data;
2132 unsigned int mask = 0;
2133 unsigned long flags;
2135 if (pp == 0)
2136 return 0;
2137 poll_wait(filp, &pp->wait, wait);
2138 spin_lock_irqsave(&pp->lock, flags);
2139 if (pp->rb_get != pp->rb_put)
2140 mask |= POLLIN;
2141 spin_unlock_irqrestore(&pp->lock, flags);
2142 return mask;
2145 static int
2146 pmu_release(struct inode *inode, struct file *file)
2148 struct pmu_private *pp = file->private_data;
2149 unsigned long flags;
2151 if (pp != 0) {
2152 file->private_data = NULL;
2153 spin_lock_irqsave(&all_pvt_lock, flags);
2154 list_del(&pp->list);
2155 spin_unlock_irqrestore(&all_pvt_lock, flags);
2157 #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2158 if (pp->backlight_locker)
2159 pmac_backlight_enable();
2160 #endif
2162 kfree(pp);
2164 return 0;
2167 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2168 static void pmac_suspend_disable_irqs(void)
2170 /* Call platform functions marked "on sleep" */
2171 pmac_pfunc_i2c_suspend();
2172 pmac_pfunc_base_suspend();
2175 static int powerbook_sleep(suspend_state_t state)
2177 int error = 0;
2179 /* Wait for completion of async requests */
2180 while (!batt_req.complete)
2181 pmu_poll();
2183 /* Giveup the lazy FPU & vec so we don't have to back them
2184 * up from the low level code
2186 enable_kernel_fp();
2188 #ifdef CONFIG_ALTIVEC
2189 if (cpu_has_feature(CPU_FTR_ALTIVEC))
2190 enable_kernel_altivec();
2191 #endif /* CONFIG_ALTIVEC */
2193 switch (pmu_kind) {
2194 case PMU_OHARE_BASED:
2195 error = powerbook_sleep_3400();
2196 break;
2197 case PMU_HEATHROW_BASED:
2198 case PMU_PADDINGTON_BASED:
2199 error = powerbook_sleep_grackle();
2200 break;
2201 case PMU_KEYLARGO_BASED:
2202 error = powerbook_sleep_Core99();
2203 break;
2204 default:
2205 return -ENOSYS;
2208 if (error)
2209 return error;
2211 mdelay(100);
2213 return 0;
2216 static void pmac_suspend_enable_irqs(void)
2218 /* Force a poll of ADB interrupts */
2219 adb_int_pending = 1;
2220 via_pmu_interrupt(0, NULL);
2222 mdelay(10);
2224 /* Call platform functions marked "on wake" */
2225 pmac_pfunc_base_resume();
2226 pmac_pfunc_i2c_resume();
2229 static int pmu_sleep_valid(suspend_state_t state)
2231 return state == PM_SUSPEND_MEM
2232 && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
2235 static struct platform_suspend_ops pmu_pm_ops = {
2236 .enter = powerbook_sleep,
2237 .valid = pmu_sleep_valid,
2240 static int register_pmu_pm_ops(void)
2242 if (pmu_kind == PMU_OHARE_BASED)
2243 powerbook_sleep_init_3400();
2244 ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs;
2245 ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs;
2246 suspend_set_ops(&pmu_pm_ops);
2248 return 0;
2251 device_initcall(register_pmu_pm_ops);
2252 #endif
2254 static int
2255 pmu_ioctl(struct inode * inode, struct file *filp,
2256 u_int cmd, u_long arg)
2258 __u32 __user *argp = (__u32 __user *)arg;
2259 int error = -EINVAL;
2261 switch (cmd) {
2262 case PMU_IOC_SLEEP:
2263 if (!capable(CAP_SYS_ADMIN))
2264 return -EACCES;
2265 return pm_suspend(PM_SUSPEND_MEM);
2266 case PMU_IOC_CAN_SLEEP:
2267 if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)
2268 return put_user(0, argp);
2269 else
2270 return put_user(1, argp);
2272 #ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
2273 /* Compatibility ioctl's for backlight */
2274 case PMU_IOC_GET_BACKLIGHT:
2276 int brightness;
2278 brightness = pmac_backlight_get_legacy_brightness();
2279 if (brightness < 0)
2280 return brightness;
2281 else
2282 return put_user(brightness, argp);
2285 case PMU_IOC_SET_BACKLIGHT:
2287 int brightness;
2289 error = get_user(brightness, argp);
2290 if (error)
2291 return error;
2293 return pmac_backlight_set_legacy_brightness(brightness);
2295 #ifdef CONFIG_INPUT_ADBHID
2296 case PMU_IOC_GRAB_BACKLIGHT: {
2297 struct pmu_private *pp = filp->private_data;
2299 if (pp->backlight_locker)
2300 return 0;
2302 pp->backlight_locker = 1;
2303 pmac_backlight_disable();
2305 return 0;
2307 #endif /* CONFIG_INPUT_ADBHID */
2308 #endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */
2310 case PMU_IOC_GET_MODEL:
2311 return put_user(pmu_kind, argp);
2312 case PMU_IOC_HAS_ADB:
2313 return put_user(pmu_has_adb, argp);
2315 return error;
2318 static const struct file_operations pmu_device_fops = {
2319 .read = pmu_read,
2320 .write = pmu_write,
2321 .poll = pmu_fpoll,
2322 .ioctl = pmu_ioctl,
2323 .open = pmu_open,
2324 .release = pmu_release,
2327 static struct miscdevice pmu_device = {
2328 PMU_MINOR, "pmu", &pmu_device_fops
2331 static int pmu_device_init(void)
2333 if (!via)
2334 return 0;
2335 if (misc_register(&pmu_device) < 0)
2336 printk(KERN_ERR "via-pmu: cannot register misc device.\n");
2337 return 0;
2339 device_initcall(pmu_device_init);
2342 #ifdef DEBUG_SLEEP
2343 static inline void
2344 polled_handshake(volatile unsigned char __iomem *via)
2346 via[B] &= ~TREQ; eieio();
2347 while ((via[B] & TACK) != 0)
2349 via[B] |= TREQ; eieio();
2350 while ((via[B] & TACK) == 0)
2354 static inline void
2355 polled_send_byte(volatile unsigned char __iomem *via, int x)
2357 via[ACR] |= SR_OUT | SR_EXT; eieio();
2358 via[SR] = x; eieio();
2359 polled_handshake(via);
2362 static inline int
2363 polled_recv_byte(volatile unsigned char __iomem *via)
2365 int x;
2367 via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
2368 x = via[SR]; eieio();
2369 polled_handshake(via);
2370 x = via[SR]; eieio();
2371 return x;
2375 pmu_polled_request(struct adb_request *req)
2377 unsigned long flags;
2378 int i, l, c;
2379 volatile unsigned char __iomem *v = via;
2381 req->complete = 1;
2382 c = req->data[0];
2383 l = pmu_data_len[c][0];
2384 if (l >= 0 && req->nbytes != l + 1)
2385 return -EINVAL;
2387 local_irq_save(flags);
2388 while (pmu_state != idle)
2389 pmu_poll();
2391 while ((via[B] & TACK) == 0)
2393 polled_send_byte(v, c);
2394 if (l < 0) {
2395 l = req->nbytes - 1;
2396 polled_send_byte(v, l);
2398 for (i = 1; i <= l; ++i)
2399 polled_send_byte(v, req->data[i]);
2401 l = pmu_data_len[c][1];
2402 if (l < 0)
2403 l = polled_recv_byte(v);
2404 for (i = 0; i < l; ++i)
2405 req->reply[i + req->reply_len] = polled_recv_byte(v);
2407 if (req->done)
2408 (*req->done)(req);
2410 local_irq_restore(flags);
2411 return 0;
2414 /* N.B. This doesn't work on the 3400 */
2415 void pmu_blink(int n)
2417 struct adb_request req;
2419 memset(&req, 0, sizeof(req));
2421 for (; n > 0; --n) {
2422 req.nbytes = 4;
2423 req.done = NULL;
2424 req.data[0] = 0xee;
2425 req.data[1] = 4;
2426 req.data[2] = 0;
2427 req.data[3] = 1;
2428 req.reply[0] = ADB_RET_OK;
2429 req.reply_len = 1;
2430 req.reply_expected = 0;
2431 pmu_polled_request(&req);
2432 mdelay(50);
2433 req.nbytes = 4;
2434 req.done = NULL;
2435 req.data[0] = 0xee;
2436 req.data[1] = 4;
2437 req.data[2] = 0;
2438 req.data[3] = 0;
2439 req.reply[0] = ADB_RET_OK;
2440 req.reply_len = 1;
2441 req.reply_expected = 0;
2442 pmu_polled_request(&req);
2443 mdelay(50);
2445 mdelay(50);
2447 #endif /* DEBUG_SLEEP */
2449 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2450 int pmu_sys_suspended;
2452 static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
2454 if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended)
2455 return 0;
2457 /* Suspend PMU event interrupts */\
2458 pmu_suspend();
2459 pmu_sys_suspended = 1;
2461 #ifdef CONFIG_PMAC_BACKLIGHT
2462 /* Tell backlight code not to muck around with the chip anymore */
2463 pmu_backlight_set_sleep(1);
2464 #endif
2466 return 0;
2469 static int pmu_sys_resume(struct sys_device *sysdev)
2471 struct adb_request req;
2473 if (!pmu_sys_suspended)
2474 return 0;
2476 /* Tell PMU we are ready */
2477 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
2478 pmu_wait_complete(&req);
2480 #ifdef CONFIG_PMAC_BACKLIGHT
2481 /* Tell backlight code it can use the chip again */
2482 pmu_backlight_set_sleep(0);
2483 #endif
2484 /* Resume PMU event interrupts */
2485 pmu_resume();
2486 pmu_sys_suspended = 0;
2488 return 0;
2491 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2493 static struct sysdev_class pmu_sysclass = {
2494 .name = "pmu",
2497 static struct sys_device device_pmu = {
2498 .cls = &pmu_sysclass,
2501 static struct sysdev_driver driver_pmu = {
2502 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2503 .suspend = &pmu_sys_suspend,
2504 .resume = &pmu_sys_resume,
2505 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2508 static int __init init_pmu_sysfs(void)
2510 int rc;
2512 rc = sysdev_class_register(&pmu_sysclass);
2513 if (rc) {
2514 printk(KERN_ERR "Failed registering PMU sys class\n");
2515 return -ENODEV;
2517 rc = sysdev_register(&device_pmu);
2518 if (rc) {
2519 printk(KERN_ERR "Failed registering PMU sys device\n");
2520 return -ENODEV;
2522 rc = sysdev_driver_register(&pmu_sysclass, &driver_pmu);
2523 if (rc) {
2524 printk(KERN_ERR "Failed registering PMU sys driver\n");
2525 return -ENODEV;
2527 return 0;
2530 subsys_initcall(init_pmu_sysfs);
2532 EXPORT_SYMBOL(pmu_request);
2533 EXPORT_SYMBOL(pmu_queue_request);
2534 EXPORT_SYMBOL(pmu_poll);
2535 EXPORT_SYMBOL(pmu_poll_adb);
2536 EXPORT_SYMBOL(pmu_wait_complete);
2537 EXPORT_SYMBOL(pmu_suspend);
2538 EXPORT_SYMBOL(pmu_resume);
2539 EXPORT_SYMBOL(pmu_unlock);
2540 #if defined(CONFIG_PPC32)
2541 EXPORT_SYMBOL(pmu_enable_irled);
2542 EXPORT_SYMBOL(pmu_battery_count);
2543 EXPORT_SYMBOL(pmu_batteries);
2544 EXPORT_SYMBOL(pmu_power_flags);
2545 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */