?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/amd-iommu: Add per IOMMU reference counting
[linux/fpc-iii.git] / drivers / net / amd8111e.c
blob4e6359fff0e121beca678ed96f15f471a9466274
1
2 /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver
3 * Copyright (C) 2004 Advanced Micro Devices
4 *
5 *
6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
10 * Copyright 1993 United States Government as represented by the
11 * Director, National Security Agency.[ pcnet32.c ]
12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
14 *
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
29 * USA
30
31 Module Name:
32
33 amd8111e.c
34
35 Abstract:
36
37 AMD8111 based 10/100 Ethernet Controller Driver.
38
39 Environment:
40
41 Kernel Mode
42
43 Revision History:
44 3.0.0
45 Initial Revision.
46 3.0.1
47 1. Dynamic interrupt coalescing.
48 2. Removed prev_stats.
49 3. MII support.
50 4. Dynamic IPG support
51 3.0.2 05/29/2003
52 1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
53 2. Bug fix: Fixed VLAN support failure.
54 3. Bug fix: Fixed receive interrupt coalescing bug.
55 4. Dynamic IPG support is disabled by default.
56 3.0.3 06/05/2003
57 1. Bug fix: Fixed failure to close the interface if SMP is enabled.
58 3.0.4 12/09/2003
59 1. Added set_mac_address routine for bonding driver support.
60 2. Tested the driver for bonding support
61 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
62 indicated to the h/w.
63 4. Modified amd8111e_rx() routine to receive all the received packets
64 in the first interrupt.
65 5. Bug fix: Corrected rx_errors reported in get_stats() function.
66 3.0.5 03/22/2004
67 1. Added NAPI support
68
69 */
70
71
72 #include <linux/module.h>
73 #include <linux/kernel.h>
74 #include <linux/types.h>
75 #include <linux/compiler.h>
76 #include <linux/slab.h>
77 #include <linux/delay.h>
78 #include <linux/init.h>
79 #include <linux/ioport.h>
80 #include <linux/pci.h>
81 #include <linux/netdevice.h>
82 #include <linux/etherdevice.h>
83 #include <linux/skbuff.h>
84 #include <linux/ethtool.h>
85 #include <linux/mii.h>
86 #include <linux/if_vlan.h>
87 #include <linux/ctype.h>
88 #include <linux/crc32.h>
89 #include <linux/dma-mapping.h>
90
91 #include <asm/system.h>
92 #include <asm/io.h>
93 #include <asm/byteorder.h>
94 #include <asm/uaccess.h>
95
96 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
97 #define AMD8111E_VLAN_TAG_USED 1
98 #else
99 #define AMD8111E_VLAN_TAG_USED 0
100 #endif
101
102 #include "amd8111e.h"
103 #define MODULE_NAME "amd8111e"
104 #define MODULE_VERS "3.0.7"
105 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
106 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
107 MODULE_LICENSE("GPL");
108 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
109 module_param_array(speed_duplex, int, NULL, 0);
110 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
111 module_param_array(coalesce, bool, NULL, 0);
112 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
113 module_param_array(dynamic_ipg, bool, NULL, 0);
114 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
115
116 static struct pci_device_id amd8111e_pci_tbl[] = {
117
118 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
119 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
120 { 0, }
121
122 };
123 /*
124 This function will read the PHY registers.
125 */
126 static int amd8111e_read_phy(struct amd8111e_priv* lp, int phy_id, int reg, u32* val)
127 {
128 void __iomem *mmio = lp->mmio;
129 unsigned int reg_val;
130 unsigned int repeat= REPEAT_CNT;
131
132 reg_val = readl(mmio + PHY_ACCESS);
133 while (reg_val & PHY_CMD_ACTIVE)
134 reg_val = readl( mmio + PHY_ACCESS );
135
136 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
137 ((reg & 0x1f) << 16), mmio +PHY_ACCESS);
138 do{
139 reg_val = readl(mmio + PHY_ACCESS);
140 udelay(30); /* It takes 30 us to read/write data */
141 } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
142 if(reg_val & PHY_RD_ERR)
143 goto err_phy_read;
144
145 *val = reg_val & 0xffff;
146 return 0;
147 err_phy_read:
148 *val = 0;
149 return -EINVAL;
150
151 }
152
153 /*
154 This function will write into PHY registers.
155 */
156 static int amd8111e_write_phy(struct amd8111e_priv* lp,int phy_id, int reg, u32 val)
157 {
158 unsigned int repeat = REPEAT_CNT;
159 void __iomem *mmio = lp->mmio;
160 unsigned int reg_val;
161
162 reg_val = readl(mmio + PHY_ACCESS);
163 while (reg_val & PHY_CMD_ACTIVE)
164 reg_val = readl( mmio + PHY_ACCESS );
165
166 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
167 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
168
169 do{
170 reg_val = readl(mmio + PHY_ACCESS);
171 udelay(30); /* It takes 30 us to read/write the data */
172 } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
173
174 if(reg_val & PHY_RD_ERR)
175 goto err_phy_write;
176
177 return 0;
178
179 err_phy_write:
180 return -EINVAL;
181
182 }
183 /*
184 This is the mii register read function provided to the mii interface.
185 */
186 static int amd8111e_mdio_read(struct net_device * dev, int phy_id, int reg_num)
187 {
188 struct amd8111e_priv* lp = netdev_priv(dev);
189 unsigned int reg_val;
190
191 amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
192 return reg_val;
193
194 }
195
196 /*
197 This is the mii register write function provided to the mii interface.
198 */
199 static void amd8111e_mdio_write(struct net_device * dev, int phy_id, int reg_num, int val)
200 {
201 struct amd8111e_priv* lp = netdev_priv(dev);
202
203 amd8111e_write_phy(lp, phy_id, reg_num, val);
204 }
205
206 /*
207 This function will set PHY speed. During initialization sets the original speed to 100 full.
208 */
209 static void amd8111e_set_ext_phy(struct net_device *dev)
210 {
211 struct amd8111e_priv *lp = netdev_priv(dev);
212 u32 bmcr,advert,tmp;
213
214 /* Determine mii register values to set the speed */
215 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
216 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
217 switch (lp->ext_phy_option){
218
219 default:
220 case SPEED_AUTONEG: /* advertise all values */
221 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
222 ADVERTISE_100HALF|ADVERTISE_100FULL) ;
223 break;
224 case SPEED10_HALF:
225 tmp |= ADVERTISE_10HALF;
226 break;
227 case SPEED10_FULL:
228 tmp |= ADVERTISE_10FULL;
229 break;
230 case SPEED100_HALF:
231 tmp |= ADVERTISE_100HALF;
232 break;
233 case SPEED100_FULL:
234 tmp |= ADVERTISE_100FULL;
235 break;
236 }
237
238 if(advert != tmp)
239 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
240 /* Restart auto negotiation */
241 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
242 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
243 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
244
245 }
246
247 /*
248 This function will unmap skb->data space and will free
249 all transmit and receive skbuffs.
250 */
251 static int amd8111e_free_skbs(struct net_device *dev)
252 {
253 struct amd8111e_priv *lp = netdev_priv(dev);
254 struct sk_buff* rx_skbuff;
255 int i;
256
257 /* Freeing transmit skbs */
258 for(i = 0; i < NUM_TX_BUFFERS; i++){
259 if(lp->tx_skbuff[i]){
260 pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
261 dev_kfree_skb (lp->tx_skbuff[i]);
262 lp->tx_skbuff[i] = NULL;
263 lp->tx_dma_addr[i] = 0;
264 }
265 }
266 /* Freeing previously allocated receive buffers */
267 for (i = 0; i < NUM_RX_BUFFERS; i++){
268 rx_skbuff = lp->rx_skbuff[i];
269 if(rx_skbuff != NULL){
270 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
271 lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
272 dev_kfree_skb(lp->rx_skbuff[i]);
273 lp->rx_skbuff[i] = NULL;
274 lp->rx_dma_addr[i] = 0;
275 }
276 }
277
278 return 0;
279 }
280
281 /*
282 This will set the receive buffer length corresponding to the mtu size of networkinterface.
283 */
284 static inline void amd8111e_set_rx_buff_len(struct net_device* dev)
285 {
286 struct amd8111e_priv* lp = netdev_priv(dev);
287 unsigned int mtu = dev->mtu;
288
289 if (mtu > ETH_DATA_LEN){
290 /* MTU + ethernet header + FCS
291 + optional VLAN tag + skb reserve space 2 */
292
293 lp->rx_buff_len = mtu + ETH_HLEN + 10;
294 lp->options |= OPTION_JUMBO_ENABLE;
295 } else{
296 lp->rx_buff_len = PKT_BUFF_SZ;
297 lp->options &= ~OPTION_JUMBO_ENABLE;
298 }
299 }
300
301 /*
302 This function will free all the previously allocated buffers, determine new receive buffer length and will allocate new receive buffers. This function also allocates and initializes both the transmitter and receive hardware descriptors.
303 */
304 static int amd8111e_init_ring(struct net_device *dev)
305 {
306 struct amd8111e_priv *lp = netdev_priv(dev);
307 int i;
308
309 lp->rx_idx = lp->tx_idx = 0;
310 lp->tx_complete_idx = 0;
311 lp->tx_ring_idx = 0;
312
313
314 if(lp->opened)
315 /* Free previously allocated transmit and receive skbs */
316 amd8111e_free_skbs(dev);
317
318 else{
319 /* allocate the tx and rx descriptors */
320 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
321 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
322 &lp->tx_ring_dma_addr)) == NULL)
323
324 goto err_no_mem;
325
326 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
327 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
328 &lp->rx_ring_dma_addr)) == NULL)
329
330 goto err_free_tx_ring;
331
332 }
333 /* Set new receive buff size */
334 amd8111e_set_rx_buff_len(dev);
335
336 /* Allocating receive skbs */
337 for (i = 0; i < NUM_RX_BUFFERS; i++) {
338
339 if (!(lp->rx_skbuff[i] = dev_alloc_skb(lp->rx_buff_len))) {
340 /* Release previos allocated skbs */
341 for(--i; i >= 0 ;i--)
342 dev_kfree_skb(lp->rx_skbuff[i]);
343 goto err_free_rx_ring;
344 }
345 skb_reserve(lp->rx_skbuff[i],2);
346 }
347 /* Initilaizing receive descriptors */
348 for (i = 0; i < NUM_RX_BUFFERS; i++) {
349 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
350 lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
351
352 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
353 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
354 wmb();
355 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
356 }
357
358 /* Initializing transmit descriptors */
359 for (i = 0; i < NUM_TX_RING_DR; i++) {
360 lp->tx_ring[i].buff_phy_addr = 0;
361 lp->tx_ring[i].tx_flags = 0;
362 lp->tx_ring[i].buff_count = 0;
363 }
364
365 return 0;
366
367 err_free_rx_ring:
368
369 pci_free_consistent(lp->pci_dev,
370 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
371 lp->rx_ring_dma_addr);
372
373 err_free_tx_ring:
374
375 pci_free_consistent(lp->pci_dev,
376 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
377 lp->tx_ring_dma_addr);
378
379 err_no_mem:
380 return -ENOMEM;
381 }
382 /* This function will set the interrupt coalescing according to the input arguments */
383 static int amd8111e_set_coalesce(struct net_device * dev, enum coal_mode cmod)
384 {
385 unsigned int timeout;
386 unsigned int event_count;
387
388 struct amd8111e_priv *lp = netdev_priv(dev);
389 void __iomem *mmio = lp->mmio;
390 struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
391
392
393 switch(cmod)
394 {
395 case RX_INTR_COAL :
396 timeout = coal_conf->rx_timeout;
397 event_count = coal_conf->rx_event_count;
398 if( timeout > MAX_TIMEOUT ||
399 event_count > MAX_EVENT_COUNT )
400 return -EINVAL;
401
402 timeout = timeout * DELAY_TIMER_CONV;
403 writel(VAL0|STINTEN, mmio+INTEN0);
404 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
405 mmio+DLY_INT_A);
406 break;
407
408 case TX_INTR_COAL :
409 timeout = coal_conf->tx_timeout;
410 event_count = coal_conf->tx_event_count;
411 if( timeout > MAX_TIMEOUT ||
412 event_count > MAX_EVENT_COUNT )
413 return -EINVAL;
414
415
416 timeout = timeout * DELAY_TIMER_CONV;
417 writel(VAL0|STINTEN,mmio+INTEN0);
418 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
419 mmio+DLY_INT_B);
420 break;
421
422 case DISABLE_COAL:
423 writel(0,mmio+STVAL);
424 writel(STINTEN, mmio+INTEN0);
425 writel(0, mmio +DLY_INT_B);
426 writel(0, mmio+DLY_INT_A);
427 break;
428 case ENABLE_COAL:
429 /* Start the timer */
430 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */
431 writel(VAL0|STINTEN, mmio+INTEN0);
432 break;
433 default:
434 break;
435
436 }
437 return 0;
438
439 }
440
441 /*
442 This function initializes the device registers and starts the device.
443 */
444 static int amd8111e_restart(struct net_device *dev)
445 {
446 struct amd8111e_priv *lp = netdev_priv(dev);
447 void __iomem *mmio = lp->mmio;
448 int i,reg_val;
449
450 /* stop the chip */
451 writel(RUN, mmio + CMD0);
452
453 if(amd8111e_init_ring(dev))
454 return -ENOMEM;
455
456 /* enable the port manager and set auto negotiation always */
457 writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
458 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
459
460 amd8111e_set_ext_phy(dev);
461
462 /* set control registers */
463 reg_val = readl(mmio + CTRL1);
464 reg_val &= ~XMTSP_MASK;
465 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
466
467 /* enable interrupt */
468 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
469 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
470 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
471
472 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
473
474 /* initialize tx and rx ring base addresses */
475 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
476 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
477
478 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
479 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
480
481 /* set default IPG to 96 */
482 writew((u32)DEFAULT_IPG,mmio+IPG);
483 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
484
485 if(lp->options & OPTION_JUMBO_ENABLE){
486 writel((u32)VAL2|JUMBO, mmio + CMD3);
487 /* Reset REX_UFLO */
488 writel( REX_UFLO, mmio + CMD2);
489 /* Should not set REX_UFLO for jumbo frames */
490 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
491 }else{
492 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
493 writel((u32)JUMBO, mmio + CMD3);
494 }
495
496 #if AMD8111E_VLAN_TAG_USED
497 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
498 #endif
499 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
500
501 /* Setting the MAC address to the device */
502 for(i = 0; i < ETH_ADDR_LEN; i++)
503 writeb( dev->dev_addr[i], mmio + PADR + i );
504
505 /* Enable interrupt coalesce */
506 if(lp->options & OPTION_INTR_COAL_ENABLE){
507 printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n",
508 dev->name);
509 amd8111e_set_coalesce(dev,ENABLE_COAL);
510 }
511
512 /* set RUN bit to start the chip */
513 writel(VAL2 | RDMD0, mmio + CMD0);
514 writel(VAL0 | INTREN | RUN, mmio + CMD0);
515
516 /* To avoid PCI posting bug */
517 readl(mmio+CMD0);
518 return 0;
519 }
520 /*
521 This function clears necessary the device registers.
522 */
523 static void amd8111e_init_hw_default( struct amd8111e_priv* lp)
524 {
525 unsigned int reg_val;
526 unsigned int logic_filter[2] ={0,};
527 void __iomem *mmio = lp->mmio;
528
529
530 /* stop the chip */
531 writel(RUN, mmio + CMD0);
532
533 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
534 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
535
536 /* Clear RCV_RING_BASE_ADDR */
537 writel(0, mmio + RCV_RING_BASE_ADDR0);
538
539 /* Clear XMT_RING_BASE_ADDR */
540 writel(0, mmio + XMT_RING_BASE_ADDR0);
541 writel(0, mmio + XMT_RING_BASE_ADDR1);
542 writel(0, mmio + XMT_RING_BASE_ADDR2);
543 writel(0, mmio + XMT_RING_BASE_ADDR3);
544
545 /* Clear CMD0 */
546 writel(CMD0_CLEAR,mmio + CMD0);
547
548 /* Clear CMD2 */
549 writel(CMD2_CLEAR, mmio +CMD2);
550
551 /* Clear CMD7 */
552 writel(CMD7_CLEAR , mmio + CMD7);
553
554 /* Clear DLY_INT_A and DLY_INT_B */
555 writel(0x0, mmio + DLY_INT_A);
556 writel(0x0, mmio + DLY_INT_B);
557
558 /* Clear FLOW_CONTROL */
559 writel(0x0, mmio + FLOW_CONTROL);
560
561 /* Clear INT0 write 1 to clear register */
562 reg_val = readl(mmio + INT0);
563 writel(reg_val, mmio + INT0);
564
565 /* Clear STVAL */
566 writel(0x0, mmio + STVAL);
567
568 /* Clear INTEN0 */
569 writel( INTEN0_CLEAR, mmio + INTEN0);
570
571 /* Clear LADRF */
572 writel(0x0 , mmio + LADRF);
573
574 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */
575 writel( 0x80010,mmio + SRAM_SIZE);
576
577 /* Clear RCV_RING0_LEN */
578 writel(0x0, mmio + RCV_RING_LEN0);
579
580 /* Clear XMT_RING0/1/2/3_LEN */
581 writel(0x0, mmio + XMT_RING_LEN0);
582 writel(0x0, mmio + XMT_RING_LEN1);
583 writel(0x0, mmio + XMT_RING_LEN2);
584 writel(0x0, mmio + XMT_RING_LEN3);
585
586 /* Clear XMT_RING_LIMIT */
587 writel(0x0, mmio + XMT_RING_LIMIT);
588
589 /* Clear MIB */
590 writew(MIB_CLEAR, mmio + MIB_ADDR);
591
592 /* Clear LARF */
593 amd8111e_writeq(*(u64*)logic_filter,mmio+LADRF);
594
595 /* SRAM_SIZE register */
596 reg_val = readl(mmio + SRAM_SIZE);
597
598 if(lp->options & OPTION_JUMBO_ENABLE)
599 writel( VAL2|JUMBO, mmio + CMD3);
600 #if AMD8111E_VLAN_TAG_USED
601 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
602 #endif
603 /* Set default value to CTRL1 Register */
604 writel(CTRL1_DEFAULT, mmio + CTRL1);
605
606 /* To avoid PCI posting bug */
607 readl(mmio + CMD2);
608
609 }
610
611 /*
612 This function disables the interrupt and clears all the pending
613 interrupts in INT0
614 */
615 static void amd8111e_disable_interrupt(struct amd8111e_priv* lp)
616 {
617 u32 intr0;
618
619 /* Disable interrupt */
620 writel(INTREN, lp->mmio + CMD0);
621
622 /* Clear INT0 */
623 intr0 = readl(lp->mmio + INT0);
624 writel(intr0, lp->mmio + INT0);
625
626 /* To avoid PCI posting bug */
627 readl(lp->mmio + INT0);
628
629 }
630
631 /*
632 This function stops the chip.
633 */
634 static void amd8111e_stop_chip(struct amd8111e_priv* lp)
635 {
636 writel(RUN, lp->mmio + CMD0);
637
638 /* To avoid PCI posting bug */
639 readl(lp->mmio + CMD0);
640 }
641
642 /*
643 This function frees the transmiter and receiver descriptor rings.
644 */
645 static void amd8111e_free_ring(struct amd8111e_priv* lp)
646 {
647 /* Free transmit and receive descriptor rings */
648 if(lp->rx_ring){
649 pci_free_consistent(lp->pci_dev,
650 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
651 lp->rx_ring, lp->rx_ring_dma_addr);
652 lp->rx_ring = NULL;
653 }
654
655 if(lp->tx_ring){
656 pci_free_consistent(lp->pci_dev,
657 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
658 lp->tx_ring, lp->tx_ring_dma_addr);
659
660 lp->tx_ring = NULL;
661 }
662
663 }
664 #if AMD8111E_VLAN_TAG_USED
665 /*
666 This is the receive indication function for packets with vlan tag.
667 */
668 static int amd8111e_vlan_rx(struct amd8111e_priv *lp, struct sk_buff *skb, u16 vlan_tag)
669 {
670 return vlan_hwaccel_receive_skb(skb, lp->vlgrp,vlan_tag);
671 }
672 #endif
673
674 /*
675 This function will free all the transmit skbs that are actually transmitted by the device. It will check the ownership of the skb before freeing the skb.
676 */
677 static int amd8111e_tx(struct net_device *dev)
678 {
679 struct amd8111e_priv* lp = netdev_priv(dev);
680 int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
681 int status;
682 /* Complete all the transmit packet */
683 while (lp->tx_complete_idx != lp->tx_idx){
684 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
685 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
686
687 if(status & OWN_BIT)
688 break; /* It still hasn't been Txed */
689
690 lp->tx_ring[tx_index].buff_phy_addr = 0;
691
692 /* We must free the original skb */
693 if (lp->tx_skbuff[tx_index]) {
694 pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
695 lp->tx_skbuff[tx_index]->len,
696 PCI_DMA_TODEVICE);
697 dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
698 lp->tx_skbuff[tx_index] = NULL;
699 lp->tx_dma_addr[tx_index] = 0;
700 }
701 lp->tx_complete_idx++;
702 /*COAL update tx coalescing parameters */
703 lp->coal_conf.tx_packets++;
704 lp->coal_conf.tx_bytes +=
705 le16_to_cpu(lp->tx_ring[tx_index].buff_count);
706
707 if (netif_queue_stopped(dev) &&
708 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
709 /* The ring is no longer full, clear tbusy. */
710 /* lp->tx_full = 0; */
711 netif_wake_queue (dev);
712 }
713 }
714 return 0;
715 }
716
717 /* This function handles the driver receive operation in polling mode */
718 static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
719 {
720 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
721 struct net_device *dev = lp->amd8111e_net_dev;
722 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
723 void __iomem *mmio = lp->mmio;
724 struct sk_buff *skb,*new_skb;
725 int min_pkt_len, status;
726 unsigned int intr0;
727 int num_rx_pkt = 0;
728 short pkt_len;
729 #if AMD8111E_VLAN_TAG_USED
730 short vtag;
731 #endif
732 int rx_pkt_limit = budget;
733 unsigned long flags;
734
735 do{
736 /* process receive packets until we use the quota*/
737 /* If we own the next entry, it's a new packet. Send it up. */
738 while(1) {
739 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
740 if (status & OWN_BIT)
741 break;
742
743 /*
744 * There is a tricky error noted by John Murphy,
745 * <murf@perftech.com> to Russ Nelson: Even with
746 * full-sized * buffers it's possible for a
747 * jabber packet to use two buffers, with only
748 * the last correctly noting the error.
749 */
750
751 if(status & ERR_BIT) {
752 /* reseting flags */
753 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
754 goto err_next_pkt;
755 }
756 /* check for STP and ENP */
757 if(!((status & STP_BIT) && (status & ENP_BIT))){
758 /* reseting flags */
759 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
760 goto err_next_pkt;
761 }
762 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
763
764 #if AMD8111E_VLAN_TAG_USED
765 vtag = status & TT_MASK;
766 /*MAC will strip vlan tag*/
767 if(lp->vlgrp != NULL && vtag !=0)
768 min_pkt_len =MIN_PKT_LEN - 4;
769 else
770 #endif
771 min_pkt_len =MIN_PKT_LEN;
772
773 if (pkt_len < min_pkt_len) {
774 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
775 lp->drv_rx_errors++;
776 goto err_next_pkt;
777 }
778 if(--rx_pkt_limit < 0)
779 goto rx_not_empty;
780 if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){
781 /* if allocation fail,
782 ignore that pkt and go to next one */
783 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
784 lp->drv_rx_errors++;
785 goto err_next_pkt;
786 }
787
788 skb_reserve(new_skb, 2);
789 skb = lp->rx_skbuff[rx_index];
790 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
791 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
792 skb_put(skb, pkt_len);
793 lp->rx_skbuff[rx_index] = new_skb;
794 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
795 new_skb->data,
796 lp->rx_buff_len-2,
797 PCI_DMA_FROMDEVICE);
798
799 skb->protocol = eth_type_trans(skb, dev);
800
801 #if AMD8111E_VLAN_TAG_USED
802 if(lp->vlgrp != NULL && (vtag == TT_VLAN_TAGGED)){
803 amd8111e_vlan_rx(lp, skb,
804 le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info));
805 } else
806 #endif
807 netif_receive_skb(skb);
808 /*COAL update rx coalescing parameters*/
809 lp->coal_conf.rx_packets++;
810 lp->coal_conf.rx_bytes += pkt_len;
811 num_rx_pkt++;
812
813 err_next_pkt:
814 lp->rx_ring[rx_index].buff_phy_addr
815 = cpu_to_le32(lp->rx_dma_addr[rx_index]);
816 lp->rx_ring[rx_index].buff_count =
817 cpu_to_le16(lp->rx_buff_len-2);
818 wmb();
819 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
820 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
821 }
822 /* Check the interrupt status register for more packets in the
823 mean time. Process them since we have not used up our quota.*/
824
825 intr0 = readl(mmio + INT0);
826 /*Ack receive packets */
827 writel(intr0 & RINT0,mmio + INT0);
828
829 } while(intr0 & RINT0);
830
831 if (rx_pkt_limit > 0) {
832 /* Receive descriptor is empty now */
833 spin_lock_irqsave(&lp->lock, flags);
834 __napi_complete(napi);
835 writel(VAL0|RINTEN0, mmio + INTEN0);
836 writel(VAL2 | RDMD0, mmio + CMD0);
837 spin_unlock_irqrestore(&lp->lock, flags);
838 }
839
840 rx_not_empty:
841 return num_rx_pkt;
842 }
843
844 /*
845 This function will indicate the link status to the kernel.
846 */
847 static int amd8111e_link_change(struct net_device* dev)
848 {
849 struct amd8111e_priv *lp = netdev_priv(dev);
850 int status0,speed;
851
852 /* read the link change */
853 status0 = readl(lp->mmio + STAT0);
854
855 if(status0 & LINK_STATS){
856 if(status0 & AUTONEG_COMPLETE)
857 lp->link_config.autoneg = AUTONEG_ENABLE;
858 else
859 lp->link_config.autoneg = AUTONEG_DISABLE;
860
861 if(status0 & FULL_DPLX)
862 lp->link_config.duplex = DUPLEX_FULL;
863 else
864 lp->link_config.duplex = DUPLEX_HALF;
865 speed = (status0 & SPEED_MASK) >> 7;
866 if(speed == PHY_SPEED_10)
867 lp->link_config.speed = SPEED_10;
868 else if(speed == PHY_SPEED_100)
869 lp->link_config.speed = SPEED_100;
870
871 printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n", dev->name,
872 (lp->link_config.speed == SPEED_100) ? "100": "10",
873 (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half");
874 netif_carrier_on(dev);
875 }
876 else{
877 lp->link_config.speed = SPEED_INVALID;
878 lp->link_config.duplex = DUPLEX_INVALID;
879 lp->link_config.autoneg = AUTONEG_INVALID;
880 printk(KERN_INFO "%s: Link is Down.\n",dev->name);
881 netif_carrier_off(dev);
882 }
883
884 return 0;
885 }
886 /*
887 This function reads the mib counters.
888 */
889 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
890 {
891 unsigned int status;
892 unsigned int data;
893 unsigned int repeat = REPEAT_CNT;
894
895 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
896 do {
897 status = readw(mmio + MIB_ADDR);
898 udelay(2); /* controller takes MAX 2 us to get mib data */
899 }
900 while (--repeat && (status & MIB_CMD_ACTIVE));
901
902 data = readl(mmio + MIB_DATA);
903 return data;
904 }
905
906 /*
907 This function reads the mib registers and returns the hardware statistics. It updates previous internal driver statistics with new values.
908 */
909 static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
910 {
911 struct amd8111e_priv *lp = netdev_priv(dev);
912 void __iomem *mmio = lp->mmio;
913 unsigned long flags;
914 /* struct net_device_stats *prev_stats = &lp->prev_stats; */
915 struct net_device_stats* new_stats = &lp->stats;
916
917 if(!lp->opened)
918 return &lp->stats;
919 spin_lock_irqsave (&lp->lock, flags);
920
921 /* stats.rx_packets */
922 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
923 amd8111e_read_mib(mmio, rcv_multicast_pkts)+
924 amd8111e_read_mib(mmio, rcv_unicast_pkts);
925
926 /* stats.tx_packets */
927 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
928
929 /*stats.rx_bytes */
930 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
931
932 /* stats.tx_bytes */
933 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
934
935 /* stats.rx_errors */
936 /* hw errors + errors driver reported */
937 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
938 amd8111e_read_mib(mmio, rcv_fragments)+
939 amd8111e_read_mib(mmio, rcv_jabbers)+
940 amd8111e_read_mib(mmio, rcv_alignment_errors)+
941 amd8111e_read_mib(mmio, rcv_fcs_errors)+
942 amd8111e_read_mib(mmio, rcv_miss_pkts)+
943 lp->drv_rx_errors;
944
945 /* stats.tx_errors */
946 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
947
948 /* stats.rx_dropped*/
949 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
950
951 /* stats.tx_dropped*/
952 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts);
953
954 /* stats.multicast*/
955 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
956
957 /* stats.collisions*/
958 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
959
960 /* stats.rx_length_errors*/
961 new_stats->rx_length_errors =
962 amd8111e_read_mib(mmio, rcv_undersize_pkts)+
963 amd8111e_read_mib(mmio, rcv_oversize_pkts);
964
965 /* stats.rx_over_errors*/
966 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
967
968 /* stats.rx_crc_errors*/
969 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
970
971 /* stats.rx_frame_errors*/
972 new_stats->rx_frame_errors =
973 amd8111e_read_mib(mmio, rcv_alignment_errors);
974
975 /* stats.rx_fifo_errors */
976 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
977
978 /* stats.rx_missed_errors */
979 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
980
981 /* stats.tx_aborted_errors*/
982 new_stats->tx_aborted_errors =
983 amd8111e_read_mib(mmio, xmt_excessive_collision);
984
985 /* stats.tx_carrier_errors*/
986 new_stats->tx_carrier_errors =
987 amd8111e_read_mib(mmio, xmt_loss_carrier);
988
989 /* stats.tx_fifo_errors*/
990 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
991
992 /* stats.tx_window_errors*/
993 new_stats->tx_window_errors =
994 amd8111e_read_mib(mmio, xmt_late_collision);
995
996 /* Reset the mibs for collecting new statistics */
997 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
998
999 spin_unlock_irqrestore (&lp->lock, flags);
1000
1001 return new_stats;
1002 }
1003 /* This function recalculate the interrupt coalescing mode on every interrupt
1004 according to the datarate and the packet rate.
1005 */
1006 static int amd8111e_calc_coalesce(struct net_device *dev)
1007 {
1008 struct amd8111e_priv *lp = netdev_priv(dev);
1009 struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
1010 int tx_pkt_rate;
1011 int rx_pkt_rate;
1012 int tx_data_rate;
1013 int rx_data_rate;
1014 int rx_pkt_size;
1015 int tx_pkt_size;
1016
1017 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
1018 coal_conf->tx_prev_packets = coal_conf->tx_packets;
1019
1020 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
1021 coal_conf->tx_prev_bytes = coal_conf->tx_bytes;
1022
1023 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
1024 coal_conf->rx_prev_packets = coal_conf->rx_packets;
1025
1026 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
1027 coal_conf->rx_prev_bytes = coal_conf->rx_bytes;
1028
1029 if(rx_pkt_rate < 800){
1030 if(coal_conf->rx_coal_type != NO_COALESCE){
1031
1032 coal_conf->rx_timeout = 0x0;
1033 coal_conf->rx_event_count = 0;
1034 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1035 coal_conf->rx_coal_type = NO_COALESCE;
1036 }
1037 }
1038 else{
1039
1040 rx_pkt_size = rx_data_rate/rx_pkt_rate;
1041 if (rx_pkt_size < 128){
1042 if(coal_conf->rx_coal_type != NO_COALESCE){
1043
1044 coal_conf->rx_timeout = 0;
1045 coal_conf->rx_event_count = 0;
1046 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1047 coal_conf->rx_coal_type = NO_COALESCE;
1048 }
1049
1050 }
1051 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
1052
1053 if(coal_conf->rx_coal_type != LOW_COALESCE){
1054 coal_conf->rx_timeout = 1;
1055 coal_conf->rx_event_count = 4;
1056 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1057 coal_conf->rx_coal_type = LOW_COALESCE;
1058 }
1059 }
1060 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1061
1062 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){
1063 coal_conf->rx_timeout = 1;
1064 coal_conf->rx_event_count = 4;
1065 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1066 coal_conf->rx_coal_type = MEDIUM_COALESCE;
1067 }
1068
1069 }
1070 else if(rx_pkt_size >= 1024){
1071 if(coal_conf->rx_coal_type != HIGH_COALESCE){
1072 coal_conf->rx_timeout = 2;
1073 coal_conf->rx_event_count = 3;
1074 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1075 coal_conf->rx_coal_type = HIGH_COALESCE;
1076 }
1077 }
1078 }
1079 /* NOW FOR TX INTR COALESC */
1080 if(tx_pkt_rate < 800){
1081 if(coal_conf->tx_coal_type != NO_COALESCE){
1082
1083 coal_conf->tx_timeout = 0x0;
1084 coal_conf->tx_event_count = 0;
1085 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1086 coal_conf->tx_coal_type = NO_COALESCE;
1087 }
1088 }
1089 else{
1090
1091 tx_pkt_size = tx_data_rate/tx_pkt_rate;
1092 if (tx_pkt_size < 128){
1093
1094 if(coal_conf->tx_coal_type != NO_COALESCE){
1095
1096 coal_conf->tx_timeout = 0;
1097 coal_conf->tx_event_count = 0;
1098 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1099 coal_conf->tx_coal_type = NO_COALESCE;
1100 }
1101
1102 }
1103 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1104
1105 if(coal_conf->tx_coal_type != LOW_COALESCE){
1106 coal_conf->tx_timeout = 1;
1107 coal_conf->tx_event_count = 2;
1108 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1109 coal_conf->tx_coal_type = LOW_COALESCE;
1110
1111 }
1112 }
1113 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1114
1115 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){
1116 coal_conf->tx_timeout = 2;
1117 coal_conf->tx_event_count = 5;
1118 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1119 coal_conf->tx_coal_type = MEDIUM_COALESCE;
1120 }
1121
1122 }
1123 else if(tx_pkt_size >= 1024){
1124 if (tx_pkt_size >= 1024){
1125 if(coal_conf->tx_coal_type != HIGH_COALESCE){
1126 coal_conf->tx_timeout = 4;
1127 coal_conf->tx_event_count = 8;
1128 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1129 coal_conf->tx_coal_type = HIGH_COALESCE;
1130 }
1131 }
1132 }
1133 }
1134 return 0;
1135
1136 }
1137 /*
1138 This is device interrupt function. It handles transmit, receive,link change and hardware timer interrupts.
1139 */
1140 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1141 {
1142
1143 struct net_device * dev = (struct net_device *) dev_id;
1144 struct amd8111e_priv *lp = netdev_priv(dev);
1145 void __iomem *mmio = lp->mmio;
1146 unsigned int intr0, intren0;
1147 unsigned int handled = 1;
1148
1149 if(unlikely(dev == NULL))
1150 return IRQ_NONE;
1151
1152 spin_lock(&lp->lock);
1153
1154 /* disabling interrupt */
1155 writel(INTREN, mmio + CMD0);
1156
1157 /* Read interrupt status */
1158 intr0 = readl(mmio + INT0);
1159 intren0 = readl(mmio + INTEN0);
1160
1161 /* Process all the INT event until INTR bit is clear. */
1162
1163 if (!(intr0 & INTR)){
1164 handled = 0;
1165 goto err_no_interrupt;
1166 }
1167
1168 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1169 writel(intr0, mmio + INT0);
1170
1171 /* Check if Receive Interrupt has occurred. */
1172 if (intr0 & RINT0) {
1173 if (napi_schedule_prep(&lp->napi)) {
1174 /* Disable receive interupts */
1175 writel(RINTEN0, mmio + INTEN0);
1176 /* Schedule a polling routine */
1177 __napi_schedule(&lp->napi);
1178 } else if (intren0 & RINTEN0) {
1179 printk("************Driver bug! \
1180 interrupt while in poll\n");
1181 /* Fix by disable receive interrupts */
1182 writel(RINTEN0, mmio + INTEN0);
1183 }
1184 }
1185
1186 /* Check if Transmit Interrupt has occurred. */
1187 if (intr0 & TINT0)
1188 amd8111e_tx(dev);
1189
1190 /* Check if Link Change Interrupt has occurred. */
1191 if (intr0 & LCINT)
1192 amd8111e_link_change(dev);
1193
1194 /* Check if Hardware Timer Interrupt has occurred. */
1195 if (intr0 & STINT)
1196 amd8111e_calc_coalesce(dev);
1197
1198 err_no_interrupt:
1199 writel( VAL0 | INTREN,mmio + CMD0);
1200
1201 spin_unlock(&lp->lock);
1202
1203 return IRQ_RETVAL(handled);
1204 }
1205
1206 #ifdef CONFIG_NET_POLL_CONTROLLER
1207 static void amd8111e_poll(struct net_device *dev)
1208 {
1209 unsigned long flags;
1210 local_irq_save(flags);
1211 amd8111e_interrupt(0, dev);
1212 local_irq_restore(flags);
1213 }
1214 #endif
1215
1216
1217 /*
1218 This function closes the network interface and updates the statistics so that most recent statistics will be available after the interface is down.
1219 */
1220 static int amd8111e_close(struct net_device * dev)
1221 {
1222 struct amd8111e_priv *lp = netdev_priv(dev);
1223 netif_stop_queue(dev);
1224
1225 napi_disable(&lp->napi);
1226
1227 spin_lock_irq(&lp->lock);
1228
1229 amd8111e_disable_interrupt(lp);
1230 amd8111e_stop_chip(lp);
1231
1232 /* Free transmit and receive skbs */
1233 amd8111e_free_skbs(lp->amd8111e_net_dev);
1234
1235 netif_carrier_off(lp->amd8111e_net_dev);
1236
1237 /* Delete ipg timer */
1238 if(lp->options & OPTION_DYN_IPG_ENABLE)
1239 del_timer_sync(&lp->ipg_data.ipg_timer);
1240
1241 spin_unlock_irq(&lp->lock);
1242 free_irq(dev->irq, dev);
1243 amd8111e_free_ring(lp);
1244
1245 /* Update the statistics before closing */
1246 amd8111e_get_stats(dev);
1247 lp->opened = 0;
1248 return 0;
1249 }
1250 /* This function opens new interface.It requests irq for the device, initializes the device,buffers and descriptors, and starts the device.
1251 */
1252 static int amd8111e_open(struct net_device * dev )
1253 {
1254 struct amd8111e_priv *lp = netdev_priv(dev);
1255
1256 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1257 dev->name, dev))
1258 return -EAGAIN;
1259
1260 napi_enable(&lp->napi);
1261
1262 spin_lock_irq(&lp->lock);
1263
1264 amd8111e_init_hw_default(lp);
1265
1266 if(amd8111e_restart(dev)){
1267 spin_unlock_irq(&lp->lock);
1268 napi_disable(&lp->napi);
1269 if (dev->irq)
1270 free_irq(dev->irq, dev);
1271 return -ENOMEM;
1272 }
1273 /* Start ipg timer */
1274 if(lp->options & OPTION_DYN_IPG_ENABLE){
1275 add_timer(&lp->ipg_data.ipg_timer);
1276 printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name);
1277 }
1278
1279 lp->opened = 1;
1280
1281 spin_unlock_irq(&lp->lock);
1282
1283 netif_start_queue(dev);
1284
1285 return 0;
1286 }
1287 /*
1288 This function checks if there is any transmit descriptors available to queue more packet.
1289 */
1290 static int amd8111e_tx_queue_avail(struct amd8111e_priv* lp )
1291 {
1292 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1293 if (lp->tx_skbuff[tx_index])
1294 return -1;
1295 else
1296 return 0;
1297
1298 }
1299 /*
1300 This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
1301 */
1302
1303 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
1304 struct net_device * dev)
1305 {
1306 struct amd8111e_priv *lp = netdev_priv(dev);
1307 int tx_index;
1308 unsigned long flags;
1309
1310 spin_lock_irqsave(&lp->lock, flags);
1311
1312 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1313
1314 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1315
1316 lp->tx_skbuff[tx_index] = skb;
1317 lp->tx_ring[tx_index].tx_flags = 0;
1318
1319 #if AMD8111E_VLAN_TAG_USED
1320 if((lp->vlgrp != NULL) && vlan_tx_tag_present(skb)){
1321 lp->tx_ring[tx_index].tag_ctrl_cmd |=
1322 cpu_to_le16(TCC_VLAN_INSERT);
1323 lp->tx_ring[tx_index].tag_ctrl_info =
1324 cpu_to_le16(vlan_tx_tag_get(skb));
1325
1326 }
1327 #endif
1328 lp->tx_dma_addr[tx_index] =
1329 pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1330 lp->tx_ring[tx_index].buff_phy_addr =
1331 cpu_to_le32(lp->tx_dma_addr[tx_index]);
1332
1333 /* Set FCS and LTINT bits */
1334 wmb();
1335 lp->tx_ring[tx_index].tx_flags |=
1336 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1337
1338 lp->tx_idx++;
1339
1340 /* Trigger an immediate send poll. */
1341 writel( VAL1 | TDMD0, lp->mmio + CMD0);
1342 writel( VAL2 | RDMD0,lp->mmio + CMD0);
1343
1344 dev->trans_start = jiffies;
1345
1346 if(amd8111e_tx_queue_avail(lp) < 0){
1347 netif_stop_queue(dev);
1348 }
1349 spin_unlock_irqrestore(&lp->lock, flags);
1350 return NETDEV_TX_OK;
1351 }
1352 /*
1353 This function returns all the memory mapped registers of the device.
1354 */
1355 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1356 {
1357 void __iomem *mmio = lp->mmio;
1358 /* Read only necessary registers */
1359 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1360 buf[1] = readl(mmio + XMT_RING_LEN0);
1361 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1362 buf[3] = readl(mmio + RCV_RING_LEN0);
1363 buf[4] = readl(mmio + CMD0);
1364 buf[5] = readl(mmio + CMD2);
1365 buf[6] = readl(mmio + CMD3);
1366 buf[7] = readl(mmio + CMD7);
1367 buf[8] = readl(mmio + INT0);
1368 buf[9] = readl(mmio + INTEN0);
1369 buf[10] = readl(mmio + LADRF);
1370 buf[11] = readl(mmio + LADRF+4);
1371 buf[12] = readl(mmio + STAT0);
1372 }
1373
1374
1375 /*
1376 This function sets promiscuos mode, all-multi mode or the multicast address
1377 list to the device.
1378 */
1379 static void amd8111e_set_multicast_list(struct net_device *dev)
1380 {
1381 struct dev_mc_list* mc_ptr;
1382 struct amd8111e_priv *lp = netdev_priv(dev);
1383 u32 mc_filter[2] ;
1384 int i,bit_num;
1385 if(dev->flags & IFF_PROMISC){
1386 writel( VAL2 | PROM, lp->mmio + CMD2);
1387 return;
1388 }
1389 else
1390 writel( PROM, lp->mmio + CMD2);
1391 if(dev->flags & IFF_ALLMULTI || dev->mc_count > MAX_FILTER_SIZE){
1392 /* get all multicast packet */
1393 mc_filter[1] = mc_filter[0] = 0xffffffff;
1394 lp->mc_list = dev->mc_list;
1395 lp->options |= OPTION_MULTICAST_ENABLE;
1396 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1397 return;
1398 }
1399 if( dev->mc_count == 0 ){
1400 /* get only own packets */
1401 mc_filter[1] = mc_filter[0] = 0;
1402 lp->mc_list = NULL;
1403 lp->options &= ~OPTION_MULTICAST_ENABLE;
1404 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1405 /* disable promiscous mode */
1406 writel(PROM, lp->mmio + CMD2);
1407 return;
1408 }
1409 /* load all the multicast addresses in the logic filter */
1410 lp->options |= OPTION_MULTICAST_ENABLE;
1411 lp->mc_list = dev->mc_list;
1412 mc_filter[1] = mc_filter[0] = 0;
1413 for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
1414 i++, mc_ptr = mc_ptr->next) {
1415 bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
1416 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1417 }
1418 amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);
1419
1420 /* To eliminate PCI posting bug */
1421 readl(lp->mmio + CMD2);
1422
1423 }
1424
1425 static void amd8111e_get_drvinfo(struct net_device* dev, struct ethtool_drvinfo *info)
1426 {
1427 struct amd8111e_priv *lp = netdev_priv(dev);
1428 struct pci_dev *pci_dev = lp->pci_dev;
1429 strcpy (info->driver, MODULE_NAME);
1430 strcpy (info->version, MODULE_VERS);
1431 sprintf(info->fw_version,"%u",chip_version);
1432 strcpy (info->bus_info, pci_name(pci_dev));
1433 }
1434
1435 static int amd8111e_get_regs_len(struct net_device *dev)
1436 {
1437 return AMD8111E_REG_DUMP_LEN;
1438 }
1439
1440 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1441 {
1442 struct amd8111e_priv *lp = netdev_priv(dev);
1443 regs->version = 0;
1444 amd8111e_read_regs(lp, buf);
1445 }
1446
1447 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1448 {
1449 struct amd8111e_priv *lp = netdev_priv(dev);
1450 spin_lock_irq(&lp->lock);
1451 mii_ethtool_gset(&lp->mii_if, ecmd);
1452 spin_unlock_irq(&lp->lock);
1453 return 0;
1454 }
1455
1456 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1457 {
1458 struct amd8111e_priv *lp = netdev_priv(dev);
1459 int res;
1460 spin_lock_irq(&lp->lock);
1461 res = mii_ethtool_sset(&lp->mii_if, ecmd);
1462 spin_unlock_irq(&lp->lock);
1463 return res;
1464 }
1465
1466 static int amd8111e_nway_reset(struct net_device *dev)
1467 {
1468 struct amd8111e_priv *lp = netdev_priv(dev);
1469 return mii_nway_restart(&lp->mii_if);
1470 }
1471
1472 static u32 amd8111e_get_link(struct net_device *dev)
1473 {
1474 struct amd8111e_priv *lp = netdev_priv(dev);
1475 return mii_link_ok(&lp->mii_if);
1476 }
1477
1478 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1479 {
1480 struct amd8111e_priv *lp = netdev_priv(dev);
1481 wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1482 if (lp->options & OPTION_WOL_ENABLE)
1483 wol_info->wolopts = WAKE_MAGIC;
1484 }
1485
1486 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1487 {
1488 struct amd8111e_priv *lp = netdev_priv(dev);
1489 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1490 return -EINVAL;
1491 spin_lock_irq(&lp->lock);
1492 if (wol_info->wolopts & WAKE_MAGIC)
1493 lp->options |=
1494 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1495 else if(wol_info->wolopts & WAKE_PHY)
1496 lp->options |=
1497 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1498 else
1499 lp->options &= ~OPTION_WOL_ENABLE;
1500 spin_unlock_irq(&lp->lock);
1501 return 0;
1502 }
1503
1504 static const struct ethtool_ops ops = {
1505 .get_drvinfo = amd8111e_get_drvinfo,
1506 .get_regs_len = amd8111e_get_regs_len,
1507 .get_regs = amd8111e_get_regs,
1508 .get_settings = amd8111e_get_settings,
1509 .set_settings = amd8111e_set_settings,
1510 .nway_reset = amd8111e_nway_reset,
1511 .get_link = amd8111e_get_link,
1512 .get_wol = amd8111e_get_wol,
1513 .set_wol = amd8111e_set_wol,
1514 };
1515
1516 /*
1517 This function handles all the ethtool ioctls. It gives driver info, gets/sets driver speed, gets memory mapped register values, forces auto negotiation, sets/gets WOL options for ethtool application.
1518 */
1519
1520 static int amd8111e_ioctl(struct net_device * dev , struct ifreq *ifr, int cmd)
1521 {
1522 struct mii_ioctl_data *data = if_mii(ifr);
1523 struct amd8111e_priv *lp = netdev_priv(dev);
1524 int err;
1525 u32 mii_regval;
1526
1527 switch(cmd) {
1528 case SIOCGMIIPHY:
1529 data->phy_id = lp->ext_phy_addr;
1530
1531 /* fallthru */
1532 case SIOCGMIIREG:
1533
1534 spin_lock_irq(&lp->lock);
1535 err = amd8111e_read_phy(lp, data->phy_id,
1536 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1537 spin_unlock_irq(&lp->lock);
1538
1539 data->val_out = mii_regval;
1540 return err;
1541
1542 case SIOCSMIIREG:
1543
1544 spin_lock_irq(&lp->lock);
1545 err = amd8111e_write_phy(lp, data->phy_id,
1546 data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1547 spin_unlock_irq(&lp->lock);
1548
1549 return err;
1550
1551 default:
1552 /* do nothing */
1553 break;
1554 }
1555 return -EOPNOTSUPP;
1556 }
1557 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1558 {
1559 struct amd8111e_priv *lp = netdev_priv(dev);
1560 int i;
1561 struct sockaddr *addr = p;
1562
1563 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1564 spin_lock_irq(&lp->lock);
1565 /* Setting the MAC address to the device */
1566 for(i = 0; i < ETH_ADDR_LEN; i++)
1567 writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1568
1569 spin_unlock_irq(&lp->lock);
1570
1571 return 0;
1572 }
1573
1574 /*
1575 This function changes the mtu of the device. It restarts the device to initialize the descriptor with new receive buffers.
1576 */
1577 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1578 {
1579 struct amd8111e_priv *lp = netdev_priv(dev);
1580 int err;
1581
1582 if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
1583 return -EINVAL;
1584
1585 if (!netif_running(dev)) {
1586 /* new_mtu will be used
1587 when device starts netxt time */
1588 dev->mtu = new_mtu;
1589 return 0;
1590 }
1591
1592 spin_lock_irq(&lp->lock);
1593
1594 /* stop the chip */
1595 writel(RUN, lp->mmio + CMD0);
1596
1597 dev->mtu = new_mtu;
1598
1599 err = amd8111e_restart(dev);
1600 spin_unlock_irq(&lp->lock);
1601 if(!err)
1602 netif_start_queue(dev);
1603 return err;
1604 }
1605
1606 #if AMD8111E_VLAN_TAG_USED
1607 static void amd8111e_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1608 {
1609 struct amd8111e_priv *lp = netdev_priv(dev);
1610 spin_lock_irq(&lp->lock);
1611 lp->vlgrp = grp;
1612 spin_unlock_irq(&lp->lock);
1613 }
1614 #endif
1615
1616 static int amd8111e_enable_magicpkt(struct amd8111e_priv* lp)
1617 {
1618 writel( VAL1|MPPLBA, lp->mmio + CMD3);
1619 writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1620
1621 /* To eliminate PCI posting bug */
1622 readl(lp->mmio + CMD7);
1623 return 0;
1624 }
1625
1626 static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
1627 {
1628
1629 /* Adapter is already stoped/suspended/interrupt-disabled */
1630 writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1631
1632 /* To eliminate PCI posting bug */
1633 readl(lp->mmio + CMD7);
1634 return 0;
1635 }
1636 /* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */
1637
1638 static void amd8111e_tx_timeout(struct net_device *dev)
1639 {
1640 struct amd8111e_priv* lp = netdev_priv(dev);
1641 int err;
1642
1643 printk(KERN_ERR "%s: transmit timed out, resetting\n",
1644 dev->name);
1645 spin_lock_irq(&lp->lock);
1646 err = amd8111e_restart(dev);
1647 spin_unlock_irq(&lp->lock);
1648 if(!err)
1649 netif_wake_queue(dev);
1650 }
1651 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1652 {
1653 struct net_device *dev = pci_get_drvdata(pci_dev);
1654 struct amd8111e_priv *lp = netdev_priv(dev);
1655
1656 if (!netif_running(dev))
1657 return 0;
1658
1659 /* disable the interrupt */
1660 spin_lock_irq(&lp->lock);
1661 amd8111e_disable_interrupt(lp);
1662 spin_unlock_irq(&lp->lock);
1663
1664 netif_device_detach(dev);
1665
1666 /* stop chip */
1667 spin_lock_irq(&lp->lock);
1668 if(lp->options & OPTION_DYN_IPG_ENABLE)
1669 del_timer_sync(&lp->ipg_data.ipg_timer);
1670 amd8111e_stop_chip(lp);
1671 spin_unlock_irq(&lp->lock);
1672
1673 if(lp->options & OPTION_WOL_ENABLE){
1674 /* enable wol */
1675 if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1676 amd8111e_enable_magicpkt(lp);
1677 if(lp->options & OPTION_WAKE_PHY_ENABLE)
1678 amd8111e_enable_link_change(lp);
1679
1680 pci_enable_wake(pci_dev, PCI_D3hot, 1);
1681 pci_enable_wake(pci_dev, PCI_D3cold, 1);
1682
1683 }
1684 else{
1685 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1686 pci_enable_wake(pci_dev, PCI_D3cold, 0);
1687 }
1688
1689 pci_save_state(pci_dev);
1690 pci_set_power_state(pci_dev, PCI_D3hot);
1691
1692 return 0;
1693 }
1694 static int amd8111e_resume(struct pci_dev *pci_dev)
1695 {
1696 struct net_device *dev = pci_get_drvdata(pci_dev);
1697 struct amd8111e_priv *lp = netdev_priv(dev);
1698
1699 if (!netif_running(dev))
1700 return 0;
1701
1702 pci_set_power_state(pci_dev, PCI_D0);
1703 pci_restore_state(pci_dev);
1704
1705 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1706 pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1707
1708 netif_device_attach(dev);
1709
1710 spin_lock_irq(&lp->lock);
1711 amd8111e_restart(dev);
1712 /* Restart ipg timer */
1713 if(lp->options & OPTION_DYN_IPG_ENABLE)
1714 mod_timer(&lp->ipg_data.ipg_timer,
1715 jiffies + IPG_CONVERGE_JIFFIES);
1716 spin_unlock_irq(&lp->lock);
1717
1718 return 0;
1719 }
1720
1721
1722 static void __devexit amd8111e_remove_one(struct pci_dev *pdev)
1723 {
1724 struct net_device *dev = pci_get_drvdata(pdev);
1725 if (dev) {
1726 unregister_netdev(dev);
1727 iounmap(((struct amd8111e_priv *)netdev_priv(dev))->mmio);
1728 free_netdev(dev);
1729 pci_release_regions(pdev);
1730 pci_disable_device(pdev);
1731 pci_set_drvdata(pdev, NULL);
1732 }
1733 }
1734 static void amd8111e_config_ipg(struct net_device* dev)
1735 {
1736 struct amd8111e_priv *lp = netdev_priv(dev);
1737 struct ipg_info* ipg_data = &lp->ipg_data;
1738 void __iomem *mmio = lp->mmio;
1739 unsigned int prev_col_cnt = ipg_data->col_cnt;
1740 unsigned int total_col_cnt;
1741 unsigned int tmp_ipg;
1742
1743 if(lp->link_config.duplex == DUPLEX_FULL){
1744 ipg_data->ipg = DEFAULT_IPG;
1745 return;
1746 }
1747
1748 if(ipg_data->ipg_state == SSTATE){
1749
1750 if(ipg_data->timer_tick == IPG_STABLE_TIME){
1751
1752 ipg_data->timer_tick = 0;
1753 ipg_data->ipg = MIN_IPG - IPG_STEP;
1754 ipg_data->current_ipg = MIN_IPG;
1755 ipg_data->diff_col_cnt = 0xFFFFFFFF;
1756 ipg_data->ipg_state = CSTATE;
1757 }
1758 else
1759 ipg_data->timer_tick++;
1760 }
1761
1762 if(ipg_data->ipg_state == CSTATE){
1763
1764 /* Get the current collision count */
1765
1766 total_col_cnt = ipg_data->col_cnt =
1767 amd8111e_read_mib(mmio, xmt_collisions);
1768
1769 if ((total_col_cnt - prev_col_cnt) <
1770 (ipg_data->diff_col_cnt)){
1771
1772 ipg_data->diff_col_cnt =
1773 total_col_cnt - prev_col_cnt ;
1774
1775 ipg_data->ipg = ipg_data->current_ipg;
1776 }
1777
1778 ipg_data->current_ipg += IPG_STEP;
1779
1780 if (ipg_data->current_ipg <= MAX_IPG)
1781 tmp_ipg = ipg_data->current_ipg;
1782 else{
1783 tmp_ipg = ipg_data->ipg;
1784 ipg_data->ipg_state = SSTATE;
1785 }
1786 writew((u32)tmp_ipg, mmio + IPG);
1787 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1788 }
1789 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1790 return;
1791
1792 }
1793
1794 static void __devinit amd8111e_probe_ext_phy(struct net_device* dev)
1795 {
1796 struct amd8111e_priv *lp = netdev_priv(dev);
1797 int i;
1798
1799 for (i = 0x1e; i >= 0; i--) {
1800 u32 id1, id2;
1801
1802 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1803 continue;
1804 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1805 continue;
1806 lp->ext_phy_id = (id1 << 16) | id2;
1807 lp->ext_phy_addr = i;
1808 return;
1809 }
1810 lp->ext_phy_id = 0;
1811 lp->ext_phy_addr = 1;
1812 }
1813
1814 static const struct net_device_ops amd8111e_netdev_ops = {
1815 .ndo_open = amd8111e_open,
1816 .ndo_stop = amd8111e_close,
1817 .ndo_start_xmit = amd8111e_start_xmit,
1818 .ndo_tx_timeout = amd8111e_tx_timeout,
1819 .ndo_get_stats = amd8111e_get_stats,
1820 .ndo_set_multicast_list = amd8111e_set_multicast_list,
1821 .ndo_validate_addr = eth_validate_addr,
1822 .ndo_set_mac_address = amd8111e_set_mac_address,
1823 .ndo_do_ioctl = amd8111e_ioctl,
1824 .ndo_change_mtu = amd8111e_change_mtu,
1825 #if AMD8111E_VLAN_TAG_USED
1826 .ndo_vlan_rx_register = amd8111e_vlan_rx_register,
1827 #endif
1828 #ifdef CONFIG_NET_POLL_CONTROLLER
1829 .ndo_poll_controller = amd8111e_poll,
1830 #endif
1831 };
1832
1833 static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
1834 const struct pci_device_id *ent)
1835 {
1836 int err,i,pm_cap;
1837 unsigned long reg_addr,reg_len;
1838 struct amd8111e_priv* lp;
1839 struct net_device* dev;
1840
1841 err = pci_enable_device(pdev);
1842 if(err){
1843 printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
1844 "exiting.\n");
1845 return err;
1846 }
1847
1848 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1849 printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
1850 "exiting.\n");
1851 err = -ENODEV;
1852 goto err_disable_pdev;
1853 }
1854
1855 err = pci_request_regions(pdev, MODULE_NAME);
1856 if(err){
1857 printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, "
1858 "exiting.\n");
1859 goto err_disable_pdev;
1860 }
1861
1862 pci_set_master(pdev);
1863
1864 /* Find power-management capability. */
1865 if((pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM))==0){
1866 printk(KERN_ERR "amd8111e: No Power Management capability, "
1867 "exiting.\n");
1868 goto err_free_reg;
1869 }
1870
1871 /* Initialize DMA */
1872 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
1873 printk(KERN_ERR "amd8111e: DMA not supported,"
1874 "exiting.\n");
1875 goto err_free_reg;
1876 }
1877
1878 reg_addr = pci_resource_start(pdev, 0);
1879 reg_len = pci_resource_len(pdev, 0);
1880
1881 dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1882 if (!dev) {
1883 printk(KERN_ERR "amd8111e: Etherdev alloc failed, exiting.\n");
1884 err = -ENOMEM;
1885 goto err_free_reg;
1886 }
1887
1888 SET_NETDEV_DEV(dev, &pdev->dev);
1889
1890 #if AMD8111E_VLAN_TAG_USED
1891 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX ;
1892 #endif
1893
1894 lp = netdev_priv(dev);
1895 lp->pci_dev = pdev;
1896 lp->amd8111e_net_dev = dev;
1897 lp->pm_cap = pm_cap;
1898
1899 spin_lock_init(&lp->lock);
1900
1901 lp->mmio = ioremap(reg_addr, reg_len);
1902 if (!lp->mmio) {
1903 printk(KERN_ERR "amd8111e: Cannot map device registers, "
1904 "exiting\n");
1905 err = -ENOMEM;
1906 goto err_free_dev;
1907 }
1908
1909 /* Initializing MAC address */
1910 for(i = 0; i < ETH_ADDR_LEN; i++)
1911 dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1912
1913 /* Setting user defined parametrs */
1914 lp->ext_phy_option = speed_duplex[card_idx];
1915 if(coalesce[card_idx])
1916 lp->options |= OPTION_INTR_COAL_ENABLE;
1917 if(dynamic_ipg[card_idx++])
1918 lp->options |= OPTION_DYN_IPG_ENABLE;
1919
1920
1921 /* Initialize driver entry points */
1922 dev->netdev_ops = &amd8111e_netdev_ops;
1923 SET_ETHTOOL_OPS(dev, &ops);
1924 dev->irq =pdev->irq;
1925 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1926 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1927
1928 #if AMD8111E_VLAN_TAG_USED
1929 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
1930 #endif
1931 /* Probe the external PHY */
1932 amd8111e_probe_ext_phy(dev);
1933
1934 /* setting mii default values */
1935 lp->mii_if.dev = dev;
1936 lp->mii_if.mdio_read = amd8111e_mdio_read;
1937 lp->mii_if.mdio_write = amd8111e_mdio_write;
1938 lp->mii_if.phy_id = lp->ext_phy_addr;
1939
1940 /* Set receive buffer length and set jumbo option*/
1941 amd8111e_set_rx_buff_len(dev);
1942
1943
1944 err = register_netdev(dev);
1945 if (err) {
1946 printk(KERN_ERR "amd8111e: Cannot register net device, "
1947 "exiting.\n");
1948 goto err_iounmap;
1949 }
1950
1951 pci_set_drvdata(pdev, dev);
1952
1953 /* Initialize software ipg timer */
1954 if(lp->options & OPTION_DYN_IPG_ENABLE){
1955 init_timer(&lp->ipg_data.ipg_timer);
1956 lp->ipg_data.ipg_timer.data = (unsigned long) dev;
1957 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
1958 lp->ipg_data.ipg_timer.expires = jiffies +
1959 IPG_CONVERGE_JIFFIES;
1960 lp->ipg_data.ipg = DEFAULT_IPG;
1961 lp->ipg_data.ipg_state = CSTATE;
1962 };
1963
1964 /* display driver and device information */
1965
1966 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
1967 printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",
1968 dev->name,MODULE_VERS);
1969 printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
1970 dev->name, chip_version, dev->dev_addr);
1971 if (lp->ext_phy_id)
1972 printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
1973 dev->name, lp->ext_phy_id, lp->ext_phy_addr);
1974 else
1975 printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n",
1976 dev->name);
1977 return 0;
1978 err_iounmap:
1979 iounmap(lp->mmio);
1980
1981 err_free_dev:
1982 free_netdev(dev);
1983
1984 err_free_reg:
1985 pci_release_regions(pdev);
1986
1987 err_disable_pdev:
1988 pci_disable_device(pdev);
1989 pci_set_drvdata(pdev, NULL);
1990 return err;
1991
1992 }
1993
1994 static struct pci_driver amd8111e_driver = {
1995 .name = MODULE_NAME,
1996 .id_table = amd8111e_pci_tbl,
1997 .probe = amd8111e_probe_one,
1998 .remove = __devexit_p(amd8111e_remove_one),
1999 .suspend = amd8111e_suspend,
2000 .resume = amd8111e_resume
2001 };
2002
2003 static int __init amd8111e_init(void)
2004 {
2005 return pci_register_driver(&amd8111e_driver);
2006 }
2007
2008 static void __exit amd8111e_cleanup(void)
2009 {
2010 pci_unregister_driver(&amd8111e_driver);
2011 }
2012
2013 module_init(amd8111e_init);
2014 module_exit(amd8111e_cleanup);
Linux with added FPC-III support