?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/amd-iommu: Add per IOMMU reference counting
[linux/fpc-iii.git] / drivers / net / atarilance.c
blob0c0deceb693875d6efcf3d2419c74d33297cd495
1 /* atarilance.c: Ethernet driver for VME Lance cards on the Atari */
2 /*
3 Written 1995/96 by Roman Hodek (Roman.Hodek@informatik.uni-erlangen.de)
4
5 This software may be used and distributed according to the terms
6 of the GNU General Public License, incorporated herein by reference.
7
8 This drivers was written with the following sources of reference:
9 - The driver for the Riebl Lance card by the TU Vienna.
10 - The modified TUW driver for PAM's VME cards
11 - The PC-Linux driver for Lance cards (but this is for bus master
12 cards, not the shared memory ones)
13 - The Amiga Ariadne driver
14
15 v1.0: (in 1.2.13pl4/0.9.13)
16 Initial version
17 v1.1: (in 1.2.13pl5)
18 more comments
19 deleted some debugging stuff
20 optimized register access (keep AREG pointing to CSR0)
21 following AMD, CSR0_STRT should be set only after IDON is detected
22 use memcpy() for data transfers, that also employs long word moves
23 better probe procedure for 24-bit systems
24 non-VME-RieblCards need extra delays in memcpy
25 must also do write test, since 0xfxe00000 may hit ROM
26 use 8/32 tx/rx buffers, which should give better NFS performance;
27 this is made possible by shifting the last packet buffer after the
28 RieblCard reserved area
29 v1.2: (in 1.2.13pl8)
30 again fixed probing for the Falcon; 0xfe01000 hits phys. 0x00010000
31 and thus RAM, in case of no Lance found all memory contents have to
32 be restored!
33 Now possible to compile as module.
34 v1.3: 03/30/96 Jes Sorensen, Roman (in 1.3)
35 Several little 1.3 adaptions
36 When the lance is stopped it jumps back into little-endian
37 mode. It is therefore necessary to put it back where it
38 belongs, in big endian mode, in order to make things work.
39 This might be the reason why multicast-mode didn't work
40 before, but I'm not able to test it as I only got an Amiga
41 (we had similar problems with the A2065 driver).
42
43 */
44
45 static char version[] = "atarilance.c: v1.3 04/04/96 "
46 "Roman.Hodek@informatik.uni-erlangen.de\n";
47
48 #include <linux/netdevice.h>
49 #include <linux/etherdevice.h>
50 #include <linux/module.h>
51 #include <linux/stddef.h>
52 #include <linux/kernel.h>
53 #include <linux/string.h>
54 #include <linux/errno.h>
55 #include <linux/skbuff.h>
56 #include <linux/slab.h>
57 #include <linux/interrupt.h>
58 #include <linux/init.h>
59 #include <linux/bitops.h>
60
61 #include <asm/setup.h>
62 #include <asm/irq.h>
63 #include <asm/atarihw.h>
64 #include <asm/atariints.h>
65 #include <asm/io.h>
66
67 /* Debug level:
68 * 0 = silent, print only serious errors
69 * 1 = normal, print error messages
70 * 2 = debug, print debug infos
71 * 3 = debug, print even more debug infos (packet data)
72 */
73
74 #define LANCE_DEBUG 1
75
76 #ifdef LANCE_DEBUG
77 static int lance_debug = LANCE_DEBUG;
78 #else
79 static int lance_debug = 1;
80 #endif
81 module_param(lance_debug, int, 0);
82 MODULE_PARM_DESC(lance_debug, "atarilance debug level (0-3)");
83 MODULE_LICENSE("GPL");
84
85 /* Print debug messages on probing? */
86 #undef LANCE_DEBUG_PROBE
87
88 #define DPRINTK(n,a) \
89 do { \
90 if (lance_debug >= n) \
91 printk a; \
92 } while( 0 )
93
94 #ifdef LANCE_DEBUG_PROBE
95 # define PROBE_PRINT(a) printk a
96 #else
97 # define PROBE_PRINT(a)
98 #endif
99
100 /* These define the number of Rx and Tx buffers as log2. (Only powers
101 * of two are valid)
102 * Much more rx buffers (32) are reserved than tx buffers (8), since receiving
103 * is more time critical then sending and packets may have to remain in the
104 * board's memory when main memory is low.
105 */
106
107 #define TX_LOG_RING_SIZE 3
108 #define RX_LOG_RING_SIZE 5
109
110 /* These are the derived values */
111
112 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
113 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
114 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
115
116 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
117 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
118 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
119
120 #define TX_TIMEOUT 20
121
122 /* The LANCE Rx and Tx ring descriptors. */
123 struct lance_rx_head {
124 unsigned short base; /* Low word of base addr */
125 volatile unsigned char flag;
126 unsigned char base_hi; /* High word of base addr (unused) */
127 short buf_length; /* This length is 2s complement! */
128 volatile short msg_length; /* This length is "normal". */
129 };
130
131 struct lance_tx_head {
132 unsigned short base; /* Low word of base addr */
133 volatile unsigned char flag;
134 unsigned char base_hi; /* High word of base addr (unused) */
135 short length; /* Length is 2s complement! */
136 volatile short misc;
137 };
138
139 struct ringdesc {
140 unsigned short adr_lo; /* Low 16 bits of address */
141 unsigned char len; /* Length bits */
142 unsigned char adr_hi; /* High 8 bits of address (unused) */
143 };
144
145 /* The LANCE initialization block, described in databook. */
146 struct lance_init_block {
147 unsigned short mode; /* Pre-set mode */
148 unsigned char hwaddr[6]; /* Physical ethernet address */
149 unsigned filter[2]; /* Multicast filter (unused). */
150 /* Receive and transmit ring base, along with length bits. */
151 struct ringdesc rx_ring;
152 struct ringdesc tx_ring;
153 };
154
155 /* The whole layout of the Lance shared memory */
156 struct lance_memory {
157 struct lance_init_block init;
158 struct lance_tx_head tx_head[TX_RING_SIZE];
159 struct lance_rx_head rx_head[RX_RING_SIZE];
160 char packet_area[0]; /* packet data follow after the
161 * init block and the ring
162 * descriptors and are located
163 * at runtime */
164 };
165
166 /* RieblCard specifics:
167 * The original TOS driver for these cards reserves the area from offset
168 * 0xee70 to 0xeebb for storing configuration data. Of interest to us is the
169 * Ethernet address there, and the magic for verifying the data's validity.
170 * The reserved area isn't touch by packet buffers. Furthermore, offset 0xfffe
171 * is reserved for the interrupt vector number.
172 */
173 #define RIEBL_RSVD_START 0xee70
174 #define RIEBL_RSVD_END 0xeec0
175 #define RIEBL_MAGIC 0x09051990
176 #define RIEBL_MAGIC_ADDR ((unsigned long *)(((char *)MEM) + 0xee8a))
177 #define RIEBL_HWADDR_ADDR ((unsigned char *)(((char *)MEM) + 0xee8e))
178 #define RIEBL_IVEC_ADDR ((unsigned short *)(((char *)MEM) + 0xfffe))
179
180 /* This is a default address for the old RieblCards without a battery
181 * that have no ethernet address at boot time. 00:00:36:04 is the
182 * prefix for Riebl cards, the 00:00 at the end is arbitrary.
183 */
184
185 static unsigned char OldRieblDefHwaddr[6] = {
186 0x00, 0x00, 0x36, 0x04, 0x00, 0x00
187 };
188
189
190 /* I/O registers of the Lance chip */
191
192 struct lance_ioreg {
193 /* base+0x0 */ volatile unsigned short data;
194 /* base+0x2 */ volatile unsigned short addr;
195 unsigned char _dummy1[3];
196 /* base+0x7 */ volatile unsigned char ivec;
197 unsigned char _dummy2[5];
198 /* base+0xd */ volatile unsigned char eeprom;
199 unsigned char _dummy3;
200 /* base+0xf */ volatile unsigned char mem;
201 };
202
203 /* Types of boards this driver supports */
204
205 enum lance_type {
206 OLD_RIEBL, /* old Riebl card without battery */
207 NEW_RIEBL, /* new Riebl card with battery */
208 PAM_CARD /* PAM card with EEPROM */
209 };
210
211 static char *lance_names[] = {
212 "Riebl-Card (without battery)",
213 "Riebl-Card (with battery)",
214 "PAM intern card"
215 };
216
217 /* The driver's private device structure */
218
219 struct lance_private {
220 enum lance_type cardtype;
221 struct lance_ioreg *iobase;
222 struct lance_memory *mem;
223 int cur_rx, cur_tx; /* The next free ring entry */
224 int dirty_tx; /* Ring entries to be freed. */
225 /* copy function */
226 void *(*memcpy_f)( void *, const void *, size_t );
227 /* This must be long for set_bit() */
228 long tx_full;
229 spinlock_t devlock;
230 };
231
232 /* I/O register access macros */
233
234 #define MEM lp->mem
235 #define DREG IO->data
236 #define AREG IO->addr
237 #define REGA(a) (*( AREG = (a), &DREG ))
238
239 /* Definitions for packet buffer access: */
240 #define PKT_BUF_SZ 1544
241 /* Get the address of a packet buffer corresponding to a given buffer head */
242 #define PKTBUF_ADDR(head) (((unsigned char *)(MEM)) + (head)->base)
243
244 /* Possible memory/IO addresses for probing */
245
246 static struct lance_addr {
247 unsigned long memaddr;
248 unsigned long ioaddr;
249 int slow_flag;
250 } lance_addr_list[] = {
251 { 0xfe010000, 0xfe00fff0, 0 }, /* RieblCard VME in TT */
252 { 0xffc10000, 0xffc0fff0, 0 }, /* RieblCard VME in MegaSTE
253 (highest byte stripped) */
254 { 0xffe00000, 0xffff7000, 1 }, /* RieblCard in ST
255 (highest byte stripped) */
256 { 0xffd00000, 0xffff7000, 1 }, /* RieblCard in ST with hw modif. to
257 avoid conflict with ROM
258 (highest byte stripped) */
259 { 0xffcf0000, 0xffcffff0, 0 }, /* PAMCard VME in TT and MSTE
260 (highest byte stripped) */
261 { 0xfecf0000, 0xfecffff0, 0 }, /* Rhotron's PAMCard VME in TT and MSTE
262 (highest byte stripped) */
263 };
264
265 #define N_LANCE_ADDR ARRAY_SIZE(lance_addr_list)
266
267
268 /* Definitions for the Lance */
269
270 /* tx_head flags */
271 #define TMD1_ENP 0x01 /* end of packet */
272 #define TMD1_STP 0x02 /* start of packet */
273 #define TMD1_DEF 0x04 /* deferred */
274 #define TMD1_ONE 0x08 /* one retry needed */
275 #define TMD1_MORE 0x10 /* more than one retry needed */
276 #define TMD1_ERR 0x40 /* error summary */
277 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
278
279 #define TMD1_OWN_CHIP TMD1_OWN
280 #define TMD1_OWN_HOST 0
281
282 /* tx_head misc field */
283 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
284 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
285 #define TMD3_LCAR 0x0800 /* carrier lost */
286 #define TMD3_LCOL 0x1000 /* late collision */
287 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
288 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
289
290 /* rx_head flags */
291 #define RMD1_ENP 0x01 /* end of packet */
292 #define RMD1_STP 0x02 /* start of packet */
293 #define RMD1_BUFF 0x04 /* buffer error */
294 #define RMD1_CRC 0x08 /* CRC error */
295 #define RMD1_OFLO 0x10 /* overflow */
296 #define RMD1_FRAM 0x20 /* framing error */
297 #define RMD1_ERR 0x40 /* error summary */
298 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
299
300 #define RMD1_OWN_CHIP RMD1_OWN
301 #define RMD1_OWN_HOST 0
302
303 /* register names */
304 #define CSR0 0 /* mode/status */
305 #define CSR1 1 /* init block addr (low) */
306 #define CSR2 2 /* init block addr (high) */
307 #define CSR3 3 /* misc */
308 #define CSR8 8 /* address filter */
309 #define CSR15 15 /* promiscuous mode */
310
311 /* CSR0 */
312 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
313 #define CSR0_INIT 0x0001 /* initialize (RS) */
314 #define CSR0_STRT 0x0002 /* start (RS) */
315 #define CSR0_STOP 0x0004 /* stop (RS) */
316 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
317 #define CSR0_TXON 0x0010 /* transmitter on (R) */
318 #define CSR0_RXON 0x0020 /* receiver on (R) */
319 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
320 #define CSR0_INTR 0x0080 /* interrupt active (R) */
321 #define CSR0_IDON 0x0100 /* initialization done (RC) */
322 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
323 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
324 #define CSR0_MERR 0x0800 /* memory error (RC) */
325 #define CSR0_MISS 0x1000 /* missed frame (RC) */
326 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
327 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
328 #define CSR0_ERR 0x8000 /* error (RC) */
329
330 /* CSR3 */
331 #define CSR3_BCON 0x0001 /* byte control */
332 #define CSR3_ACON 0x0002 /* ALE control */
333 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
334
335
336
337 /***************************** Prototypes *****************************/
338
339 static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
340 *init_rec );
341 static int lance_open( struct net_device *dev );
342 static void lance_init_ring( struct net_device *dev );
343 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
344 static irqreturn_t lance_interrupt( int irq, void *dev_id );
345 static int lance_rx( struct net_device *dev );
346 static int lance_close( struct net_device *dev );
347 static void set_multicast_list( struct net_device *dev );
348 static int lance_set_mac_address( struct net_device *dev, void *addr );
349 static void lance_tx_timeout (struct net_device *dev);
350
351 /************************* End of Prototypes **************************/
352
353
354
355
356
357 static void *slow_memcpy( void *dst, const void *src, size_t len )
358
359 { char *cto = dst;
360 const char *cfrom = src;
361
362 while( len-- ) {
363 *cto++ = *cfrom++;
364 MFPDELAY();
365 }
366 return( dst );
367 }
368
369
370 struct net_device * __init atarilance_probe(int unit)
371 {
372 int i;
373 static int found;
374 struct net_device *dev;
375 int err = -ENODEV;
376
377 if (!MACH_IS_ATARI || found)
378 /* Assume there's only one board possible... That seems true, since
379 * the Riebl/PAM board's address cannot be changed. */
380 return ERR_PTR(-ENODEV);
381
382 dev = alloc_etherdev(sizeof(struct lance_private));
383 if (!dev)
384 return ERR_PTR(-ENOMEM);
385 if (unit >= 0) {
386 sprintf(dev->name, "eth%d", unit);
387 netdev_boot_setup_check(dev);
388 }
389
390 for( i = 0; i < N_LANCE_ADDR; ++i ) {
391 if (lance_probe1( dev, &lance_addr_list[i] )) {
392 found = 1;
393 err = register_netdev(dev);
394 if (!err)
395 return dev;
396 free_irq(dev->irq, dev);
397 break;
398 }
399 }
400 free_netdev(dev);
401 return ERR_PTR(err);
402 }
403
404
405 /* Derived from hwreg_present() in atari/config.c: */
406
407 static noinline int __init addr_accessible(volatile void *regp, int wordflag,
408 int writeflag)
409 {
410 int ret;
411 long flags;
412 long *vbr, save_berr;
413
414 local_irq_save(flags);
415
416 __asm__ __volatile__ ( "movec %/vbr,%0" : "=r" (vbr) : );
417 save_berr = vbr[2];
418
419 __asm__ __volatile__
420 ( "movel %/sp,%/d1\n\t"
421 "movel #Lberr,%2@\n\t"
422 "moveq #0,%0\n\t"
423 "tstl %3\n\t"
424 "bne 1f\n\t"
425 "moveb %1@,%/d0\n\t"
426 "nop \n\t"
427 "bra 2f\n"
428 "1: movew %1@,%/d0\n\t"
429 "nop \n"
430 "2: tstl %4\n\t"
431 "beq 2f\n\t"
432 "tstl %3\n\t"
433 "bne 1f\n\t"
434 "clrb %1@\n\t"
435 "nop \n\t"
436 "moveb %/d0,%1@\n\t"
437 "nop \n\t"
438 "bra 2f\n"
439 "1: clrw %1@\n\t"
440 "nop \n\t"
441 "movew %/d0,%1@\n\t"
442 "nop \n"
443 "2: moveq #1,%0\n"
444 "Lberr: movel %/d1,%/sp"
445 : "=&d" (ret)
446 : "a" (regp), "a" (&vbr[2]), "rm" (wordflag), "rm" (writeflag)
447 : "d0", "d1", "memory"
448 );
449
450 vbr[2] = save_berr;
451 local_irq_restore(flags);
452
453 return( ret );
454 }
455
456 static const struct net_device_ops lance_netdev_ops = {
457 .ndo_open = lance_open,
458 .ndo_stop = lance_close,
459 .ndo_start_xmit = lance_start_xmit,
460 .ndo_set_multicast_list = set_multicast_list,
461 .ndo_set_mac_address = lance_set_mac_address,
462 .ndo_tx_timeout = lance_tx_timeout,
463 .ndo_validate_addr = eth_validate_addr,
464 .ndo_change_mtu = eth_change_mtu,
465 };
466
467 static unsigned long __init lance_probe1( struct net_device *dev,
468 struct lance_addr *init_rec )
469 {
470 volatile unsigned short *memaddr =
471 (volatile unsigned short *)init_rec->memaddr;
472 volatile unsigned short *ioaddr =
473 (volatile unsigned short *)init_rec->ioaddr;
474 struct lance_private *lp;
475 struct lance_ioreg *IO;
476 int i;
477 static int did_version;
478 unsigned short save1, save2;
479
480 PROBE_PRINT(( "Probing for Lance card at mem %#lx io %#lx\n",
481 (long)memaddr, (long)ioaddr ));
482
483 /* Test whether memory readable and writable */
484 PROBE_PRINT(( "lance_probe1: testing memory to be accessible\n" ));
485 if (!addr_accessible( memaddr, 1, 1 )) goto probe_fail;
486
487 /* Written values should come back... */
488 PROBE_PRINT(( "lance_probe1: testing memory to be writable (1)\n" ));
489 save1 = *memaddr;
490 *memaddr = 0x0001;
491 if (*memaddr != 0x0001) goto probe_fail;
492 PROBE_PRINT(( "lance_probe1: testing memory to be writable (2)\n" ));
493 *memaddr = 0x0000;
494 if (*memaddr != 0x0000) goto probe_fail;
495 *memaddr = save1;
496
497 /* First port should be readable and writable */
498 PROBE_PRINT(( "lance_probe1: testing ioport to be accessible\n" ));
499 if (!addr_accessible( ioaddr, 1, 1 )) goto probe_fail;
500
501 /* and written values should be readable */
502 PROBE_PRINT(( "lance_probe1: testing ioport to be writeable\n" ));
503 save2 = ioaddr[1];
504 ioaddr[1] = 0x0001;
505 if (ioaddr[1] != 0x0001) goto probe_fail;
506
507 /* The CSR0_INIT bit should not be readable */
508 PROBE_PRINT(( "lance_probe1: testing CSR0 register function (1)\n" ));
509 save1 = ioaddr[0];
510 ioaddr[1] = CSR0;
511 ioaddr[0] = CSR0_INIT | CSR0_STOP;
512 if (ioaddr[0] != CSR0_STOP) {
513 ioaddr[0] = save1;
514 ioaddr[1] = save2;
515 goto probe_fail;
516 }
517 PROBE_PRINT(( "lance_probe1: testing CSR0 register function (2)\n" ));
518 ioaddr[0] = CSR0_STOP;
519 if (ioaddr[0] != CSR0_STOP) {
520 ioaddr[0] = save1;
521 ioaddr[1] = save2;
522 goto probe_fail;
523 }
524
525 /* Now ok... */
526 PROBE_PRINT(( "lance_probe1: Lance card detected\n" ));
527 goto probe_ok;
528
529 probe_fail:
530 return( 0 );
531
532 probe_ok:
533 lp = netdev_priv(dev);
534 MEM = (struct lance_memory *)memaddr;
535 IO = lp->iobase = (struct lance_ioreg *)ioaddr;
536 dev->base_addr = (unsigned long)ioaddr; /* informational only */
537 lp->memcpy_f = init_rec->slow_flag ? slow_memcpy : memcpy;
538
539 REGA( CSR0 ) = CSR0_STOP;
540
541 /* Now test for type: If the eeprom I/O port is readable, it is a
542 * PAM card */
543 if (addr_accessible( &(IO->eeprom), 0, 0 )) {
544 /* Switch back to Ram */
545 i = IO->mem;
546 lp->cardtype = PAM_CARD;
547 }
548 else if (*RIEBL_MAGIC_ADDR == RIEBL_MAGIC) {
549 lp->cardtype = NEW_RIEBL;
550 }
551 else
552 lp->cardtype = OLD_RIEBL;
553
554 if (lp->cardtype == PAM_CARD ||
555 memaddr == (unsigned short *)0xffe00000) {
556 /* PAMs card and Riebl on ST use level 5 autovector */
557 if (request_irq(IRQ_AUTO_5, lance_interrupt, IRQ_TYPE_PRIO,
558 "PAM/Riebl-ST Ethernet", dev)) {
559 printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
560 return( 0 );
561 }
562 dev->irq = (unsigned short)IRQ_AUTO_5;
563 }
564 else {
565 /* For VME-RieblCards, request a free VME int;
566 * (This must be unsigned long, since dev->irq is short and the
567 * IRQ_MACHSPEC bit would be cut off...)
568 */
569 unsigned long irq = atari_register_vme_int();
570 if (!irq) {
571 printk( "Lance: request for VME interrupt failed\n" );
572 return( 0 );
573 }
574 if (request_irq(irq, lance_interrupt, IRQ_TYPE_PRIO,
575 "Riebl-VME Ethernet", dev)) {
576 printk( "Lance: request for irq %ld failed\n", irq );
577 return( 0 );
578 }
579 dev->irq = irq;
580 }
581
582 printk("%s: %s at io %#lx, mem %#lx, irq %d%s, hwaddr ",
583 dev->name, lance_names[lp->cardtype],
584 (unsigned long)ioaddr,
585 (unsigned long)memaddr,
586 dev->irq,
587 init_rec->slow_flag ? " (slow memcpy)" : "" );
588
589 /* Get the ethernet address */
590 switch( lp->cardtype ) {
591 case OLD_RIEBL:
592 /* No ethernet address! (Set some default address) */
593 memcpy( dev->dev_addr, OldRieblDefHwaddr, 6 );
594 break;
595 case NEW_RIEBL:
596 lp->memcpy_f( dev->dev_addr, RIEBL_HWADDR_ADDR, 6 );
597 break;
598 case PAM_CARD:
599 i = IO->eeprom;
600 for( i = 0; i < 6; ++i )
601 dev->dev_addr[i] =
602 ((((unsigned short *)MEM)[i*2] & 0x0f) << 4) |
603 ((((unsigned short *)MEM)[i*2+1] & 0x0f));
604 i = IO->mem;
605 break;
606 }
607 printk("%pM\n", dev->dev_addr);
608 if (lp->cardtype == OLD_RIEBL) {
609 printk( "%s: Warning: This is a default ethernet address!\n",
610 dev->name );
611 printk( " Use \"ifconfig hw ether ...\" to set the address.\n" );
612 }
613
614 spin_lock_init(&lp->devlock);
615
616 MEM->init.mode = 0x0000; /* Disable Rx and Tx. */
617 for( i = 0; i < 6; i++ )
618 MEM->init.hwaddr[i] = dev->dev_addr[i^1]; /* <- 16 bit swap! */
619 MEM->init.filter[0] = 0x00000000;
620 MEM->init.filter[1] = 0x00000000;
621 MEM->init.rx_ring.adr_lo = offsetof( struct lance_memory, rx_head );
622 MEM->init.rx_ring.adr_hi = 0;
623 MEM->init.rx_ring.len = RX_RING_LEN_BITS;
624 MEM->init.tx_ring.adr_lo = offsetof( struct lance_memory, tx_head );
625 MEM->init.tx_ring.adr_hi = 0;
626 MEM->init.tx_ring.len = TX_RING_LEN_BITS;
627
628 if (lp->cardtype == PAM_CARD)
629 IO->ivec = IRQ_SOURCE_TO_VECTOR(dev->irq);
630 else
631 *RIEBL_IVEC_ADDR = IRQ_SOURCE_TO_VECTOR(dev->irq);
632
633 if (did_version++ == 0)
634 DPRINTK( 1, ( version ));
635
636 dev->netdev_ops = &lance_netdev_ops;
637
638 /* XXX MSch */
639 dev->watchdog_timeo = TX_TIMEOUT;
640
641 return( 1 );
642 }
643
644
645 static int lance_open( struct net_device *dev )
646 {
647 struct lance_private *lp = netdev_priv(dev);
648 struct lance_ioreg *IO = lp->iobase;
649 int i;
650
651 DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
652
653 lance_init_ring(dev);
654 /* Re-initialize the LANCE, and start it when done. */
655
656 REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0);
657 REGA( CSR2 ) = 0;
658 REGA( CSR1 ) = 0;
659 REGA( CSR0 ) = CSR0_INIT;
660 /* From now on, AREG is kept to point to CSR0 */
661
662 i = 1000000;
663 while (--i > 0)
664 if (DREG & CSR0_IDON)
665 break;
666 if (i < 0 || (DREG & CSR0_ERR)) {
667 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
668 dev->name, i, DREG ));
669 DREG = CSR0_STOP;
670 return( -EIO );
671 }
672 DREG = CSR0_IDON;
673 DREG = CSR0_STRT;
674 DREG = CSR0_INEA;
675
676 netif_start_queue (dev);
677
678 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
679
680 return( 0 );
681 }
682
683
684 /* Initialize the LANCE Rx and Tx rings. */
685
686 static void lance_init_ring( struct net_device *dev )
687 {
688 struct lance_private *lp = netdev_priv(dev);
689 int i;
690 unsigned offset;
691
692 lp->tx_full = 0;
693 lp->cur_rx = lp->cur_tx = 0;
694 lp->dirty_tx = 0;
695
696 offset = offsetof( struct lance_memory, packet_area );
697
698 /* If the packet buffer at offset 'o' would conflict with the reserved area
699 * of RieblCards, advance it */
700 #define CHECK_OFFSET(o) \
701 do { \
702 if (lp->cardtype == OLD_RIEBL || lp->cardtype == NEW_RIEBL) { \
703 if (((o) < RIEBL_RSVD_START) ? (o)+PKT_BUF_SZ > RIEBL_RSVD_START \
704 : (o) < RIEBL_RSVD_END) \
705 (o) = RIEBL_RSVD_END; \
706 } \
707 } while(0)
708
709 for( i = 0; i < TX_RING_SIZE; i++ ) {
710 CHECK_OFFSET(offset);
711 MEM->tx_head[i].base = offset;
712 MEM->tx_head[i].flag = TMD1_OWN_HOST;
713 MEM->tx_head[i].base_hi = 0;
714 MEM->tx_head[i].length = 0;
715 MEM->tx_head[i].misc = 0;
716 offset += PKT_BUF_SZ;
717 }
718
719 for( i = 0; i < RX_RING_SIZE; i++ ) {
720 CHECK_OFFSET(offset);
721 MEM->rx_head[i].base = offset;
722 MEM->rx_head[i].flag = TMD1_OWN_CHIP;
723 MEM->rx_head[i].base_hi = 0;
724 MEM->rx_head[i].buf_length = -PKT_BUF_SZ;
725 MEM->rx_head[i].msg_length = 0;
726 offset += PKT_BUF_SZ;
727 }
728 }
729
730
731 /* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
732
733
734 static void lance_tx_timeout (struct net_device *dev)
735 {
736 struct lance_private *lp = netdev_priv(dev);
737 struct lance_ioreg *IO = lp->iobase;
738
739 AREG = CSR0;
740 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
741 dev->name, DREG ));
742 DREG = CSR0_STOP;
743 /*
744 * Always set BSWP after a STOP as STOP puts it back into
745 * little endian mode.
746 */
747 REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0);
748 dev->stats.tx_errors++;
749 #ifndef final_version
750 { int i;
751 DPRINTK( 2, ( "Ring data: dirty_tx %d cur_tx %d%s cur_rx %d\n",
752 lp->dirty_tx, lp->cur_tx,
753 lp->tx_full ? " (full)" : "",
754 lp->cur_rx ));
755 for( i = 0 ; i < RX_RING_SIZE; i++ )
756 DPRINTK( 2, ( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
757 i, MEM->rx_head[i].base,
758 -MEM->rx_head[i].buf_length,
759 MEM->rx_head[i].msg_length ));
760 for( i = 0 ; i < TX_RING_SIZE; i++ )
761 DPRINTK( 2, ( "tx #%d: base=%04x len=%04x misc=%04x\n",
762 i, MEM->tx_head[i].base,
763 -MEM->tx_head[i].length,
764 MEM->tx_head[i].misc ));
765 }
766 #endif
767 /* XXX MSch: maybe purge/reinit ring here */
768 /* lance_restart, essentially */
769 lance_init_ring(dev);
770 REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
771 dev->trans_start = jiffies;
772 netif_wake_queue (dev);
773 }
774
775 /* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
776
777 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
778 {
779 struct lance_private *lp = netdev_priv(dev);
780 struct lance_ioreg *IO = lp->iobase;
781 int entry, len;
782 struct lance_tx_head *head;
783 unsigned long flags;
784
785 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
786 dev->name, DREG ));
787
788
789 /* The old LANCE chips doesn't automatically pad buffers to min. size. */
790 len = skb->len;
791 if (len < ETH_ZLEN)
792 len = ETH_ZLEN;
793 /* PAM-Card has a bug: Can only send packets with even number of bytes! */
794 else if (lp->cardtype == PAM_CARD && (len & 1))
795 ++len;
796
797 if (len > skb->len) {
798 if (skb_padto(skb, len))
799 return NETDEV_TX_OK;
800 }
801
802 netif_stop_queue (dev);
803
804 /* Fill in a Tx ring entry */
805 if (lance_debug >= 3) {
806 printk( "%s: TX pkt type 0x%04x from %pM to %pM"
807 " data at 0x%08x len %d\n",
808 dev->name, ((u_short *)skb->data)[6],
809 &skb->data[6], skb->data,
810 (int)skb->data, (int)skb->len );
811 }
812
813 /* We're not prepared for the int until the last flags are set/reset. And
814 * the int may happen already after setting the OWN_CHIP... */
815 spin_lock_irqsave (&lp->devlock, flags);
816
817 /* Mask to ring buffer boundary. */
818 entry = lp->cur_tx & TX_RING_MOD_MASK;
819 head = &(MEM->tx_head[entry]);
820
821 /* Caution: the write order is important here, set the "ownership" bits
822 * last.
823 */
824
825
826 head->length = -len;
827 head->misc = 0;
828 lp->memcpy_f( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
829 head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
830 dev->stats.tx_bytes += skb->len;
831 dev_kfree_skb( skb );
832 lp->cur_tx++;
833 while( lp->cur_tx >= TX_RING_SIZE && lp->dirty_tx >= TX_RING_SIZE ) {
834 lp->cur_tx -= TX_RING_SIZE;
835 lp->dirty_tx -= TX_RING_SIZE;
836 }
837
838 /* Trigger an immediate send poll. */
839 DREG = CSR0_INEA | CSR0_TDMD;
840 dev->trans_start = jiffies;
841
842 if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
843 TMD1_OWN_HOST)
844 netif_start_queue (dev);
845 else
846 lp->tx_full = 1;
847 spin_unlock_irqrestore (&lp->devlock, flags);
848
849 return NETDEV_TX_OK;
850 }
851
852 /* The LANCE interrupt handler. */
853
854 static irqreturn_t lance_interrupt( int irq, void *dev_id )
855 {
856 struct net_device *dev = dev_id;
857 struct lance_private *lp;
858 struct lance_ioreg *IO;
859 int csr0, boguscnt = 10;
860 int handled = 0;
861
862 if (dev == NULL) {
863 DPRINTK( 1, ( "lance_interrupt(): interrupt for unknown device.\n" ));
864 return IRQ_NONE;
865 }
866
867 lp = netdev_priv(dev);
868 IO = lp->iobase;
869 spin_lock (&lp->devlock);
870
871 AREG = CSR0;
872
873 while( ((csr0 = DREG) & (CSR0_ERR | CSR0_TINT | CSR0_RINT)) &&
874 --boguscnt >= 0) {
875 handled = 1;
876 /* Acknowledge all of the current interrupt sources ASAP. */
877 DREG = csr0 & ~(CSR0_INIT | CSR0_STRT | CSR0_STOP |
878 CSR0_TDMD | CSR0_INEA);
879
880 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
881 dev->name, csr0, DREG ));
882
883 if (csr0 & CSR0_RINT) /* Rx interrupt */
884 lance_rx( dev );
885
886 if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
887 int dirty_tx = lp->dirty_tx;
888
889 while( dirty_tx < lp->cur_tx) {
890 int entry = dirty_tx & TX_RING_MOD_MASK;
891 int status = MEM->tx_head[entry].flag;
892
893 if (status & TMD1_OWN_CHIP)
894 break; /* It still hasn't been Txed */
895
896 MEM->tx_head[entry].flag = 0;
897
898 if (status & TMD1_ERR) {
899 /* There was an major error, log it. */
900 int err_status = MEM->tx_head[entry].misc;
901 dev->stats.tx_errors++;
902 if (err_status & TMD3_RTRY) dev->stats.tx_aborted_errors++;
903 if (err_status & TMD3_LCAR) dev->stats.tx_carrier_errors++;
904 if (err_status & TMD3_LCOL) dev->stats.tx_window_errors++;
905 if (err_status & TMD3_UFLO) {
906 /* Ackk! On FIFO errors the Tx unit is turned off! */
907 dev->stats.tx_fifo_errors++;
908 /* Remove this verbosity later! */
909 DPRINTK( 1, ( "%s: Tx FIFO error! Status %04x\n",
910 dev->name, csr0 ));
911 /* Restart the chip. */
912 DREG = CSR0_STRT;
913 }
914 } else {
915 if (status & (TMD1_MORE | TMD1_ONE | TMD1_DEF))
916 dev->stats.collisions++;
917 dev->stats.tx_packets++;
918 }
919
920 /* XXX MSch: free skb?? */
921 dirty_tx++;
922 }
923
924 #ifndef final_version
925 if (lp->cur_tx - dirty_tx >= TX_RING_SIZE) {
926 DPRINTK( 0, ( "out-of-sync dirty pointer,"
927 " %d vs. %d, full=%ld.\n",
928 dirty_tx, lp->cur_tx, lp->tx_full ));
929 dirty_tx += TX_RING_SIZE;
930 }
931 #endif
932
933 if (lp->tx_full && (netif_queue_stopped(dev))
934 && dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
935 /* The ring is no longer full, clear tbusy. */
936 lp->tx_full = 0;
937 netif_wake_queue (dev);
938 }
939
940 lp->dirty_tx = dirty_tx;
941 }
942
943 /* Log misc errors. */
944 if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */
945 if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */
946 if (csr0 & CSR0_MERR) {
947 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
948 "status %04x.\n", dev->name, csr0 ));
949 /* Restart the chip. */
950 DREG = CSR0_STRT;
951 }
952 }
953
954 /* Clear any other interrupt, and set interrupt enable. */
955 DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
956 CSR0_IDON | CSR0_INEA;
957
958 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
959 dev->name, DREG ));
960
961 spin_unlock (&lp->devlock);
962 return IRQ_RETVAL(handled);
963 }
964
965
966 static int lance_rx( struct net_device *dev )
967 {
968 struct lance_private *lp = netdev_priv(dev);
969 int entry = lp->cur_rx & RX_RING_MOD_MASK;
970 int i;
971
972 DPRINTK( 2, ( "%s: rx int, flag=%04x\n", dev->name,
973 MEM->rx_head[entry].flag ));
974
975 /* If we own the next entry, it's a new packet. Send it up. */
976 while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
977 struct lance_rx_head *head = &(MEM->rx_head[entry]);
978 int status = head->flag;
979
980 if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
981 /* There is a tricky error noted by John Murphy,
982 <murf@perftech.com> to Russ Nelson: Even with full-sized
983 buffers it's possible for a jabber packet to use two
984 buffers, with only the last correctly noting the error. */
985 if (status & RMD1_ENP) /* Only count a general error at the */
986 dev->stats.rx_errors++; /* end of a packet.*/
987 if (status & RMD1_FRAM) dev->stats.rx_frame_errors++;
988 if (status & RMD1_OFLO) dev->stats.rx_over_errors++;
989 if (status & RMD1_CRC) dev->stats.rx_crc_errors++;
990 if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++;
991 head->flag &= (RMD1_ENP|RMD1_STP);
992 } else {
993 /* Malloc up new buffer, compatible with net-3. */
994 short pkt_len = head->msg_length & 0xfff;
995 struct sk_buff *skb;
996
997 if (pkt_len < 60) {
998 printk( "%s: Runt packet!\n", dev->name );
999 dev->stats.rx_errors++;
1000 }
1001 else {
1002 skb = dev_alloc_skb( pkt_len+2 );
1003 if (skb == NULL) {
1004 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
1005 dev->name ));
1006 for( i = 0; i < RX_RING_SIZE; i++ )
1007 if (MEM->rx_head[(entry+i) & RX_RING_MOD_MASK].flag &
1008 RMD1_OWN_CHIP)
1009 break;
1010
1011 if (i > RX_RING_SIZE - 2) {
1012 dev->stats.rx_dropped++;
1013 head->flag |= RMD1_OWN_CHIP;
1014 lp->cur_rx++;
1015 }
1016 break;
1017 }
1018
1019 if (lance_debug >= 3) {
1020 u_char *data = PKTBUF_ADDR(head);
1021
1022 printk(KERN_DEBUG "%s: RX pkt type 0x%04x from %pM to %pM "
1023 "data %02x %02x %02x %02x %02x %02x %02x %02x "
1024 "len %d\n",
1025 dev->name, ((u_short *)data)[6],
1026 &data[6], data,
1027 data[15], data[16], data[17], data[18],
1028 data[19], data[20], data[21], data[22],
1029 pkt_len);
1030 }
1031
1032 skb_reserve( skb, 2 ); /* 16 byte align */
1033 skb_put( skb, pkt_len ); /* Make room */
1034 lp->memcpy_f( skb->data, PKTBUF_ADDR(head), pkt_len );
1035 skb->protocol = eth_type_trans( skb, dev );
1036 netif_rx( skb );
1037 dev->stats.rx_packets++;
1038 dev->stats.rx_bytes += pkt_len;
1039 }
1040 }
1041
1042 head->flag |= RMD1_OWN_CHIP;
1043 entry = (++lp->cur_rx) & RX_RING_MOD_MASK;
1044 }
1045 lp->cur_rx &= RX_RING_MOD_MASK;
1046
1047 /* From lance.c (Donald Becker): */
1048 /* We should check that at least two ring entries are free. If not,
1049 we should free one and mark stats->rx_dropped++. */
1050
1051 return 0;
1052 }
1053
1054
1055 static int lance_close( struct net_device *dev )
1056 {
1057 struct lance_private *lp = netdev_priv(dev);
1058 struct lance_ioreg *IO = lp->iobase;
1059
1060 netif_stop_queue (dev);
1061
1062 AREG = CSR0;
1063
1064 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
1065 dev->name, DREG ));
1066
1067 /* We stop the LANCE here -- it occasionally polls
1068 memory if we don't. */
1069 DREG = CSR0_STOP;
1070
1071 return 0;
1072 }
1073
1074
1075 /* Set or clear the multicast filter for this adaptor.
1076 num_addrs == -1 Promiscuous mode, receive all packets
1077 num_addrs == 0 Normal mode, clear multicast list
1078 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
1079 best-effort filtering.
1080 */
1081
1082 static void set_multicast_list( struct net_device *dev )
1083 {
1084 struct lance_private *lp = netdev_priv(dev);
1085 struct lance_ioreg *IO = lp->iobase;
1086
1087 if (netif_running(dev))
1088 /* Only possible if board is already started */
1089 return;
1090
1091 /* We take the simple way out and always enable promiscuous mode. */
1092 DREG = CSR0_STOP; /* Temporarily stop the lance. */
1093
1094 if (dev->flags & IFF_PROMISC) {
1095 /* Log any net taps. */
1096 DPRINTK( 2, ( "%s: Promiscuous mode enabled.\n", dev->name ));
1097 REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
1098 } else {
1099 short multicast_table[4];
1100 int num_addrs = dev->mc_count;
1101 int i;
1102 /* We don't use the multicast table, but rely on upper-layer
1103 * filtering. */
1104 memset( multicast_table, (num_addrs == 0) ? 0 : -1,
1105 sizeof(multicast_table) );
1106 for( i = 0; i < 4; i++ )
1107 REGA( CSR8+i ) = multicast_table[i];
1108 REGA( CSR15 ) = 0; /* Unset promiscuous mode */
1109 }
1110
1111 /*
1112 * Always set BSWP after a STOP as STOP puts it back into
1113 * little endian mode.
1114 */
1115 REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0);
1116
1117 /* Resume normal operation and reset AREG to CSR0 */
1118 REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
1119 }
1120
1121
1122 /* This is needed for old RieblCards and possible for new RieblCards */
1123
1124 static int lance_set_mac_address( struct net_device *dev, void *addr )
1125 {
1126 struct lance_private *lp = netdev_priv(dev);
1127 struct sockaddr *saddr = addr;
1128 int i;
1129
1130 if (lp->cardtype != OLD_RIEBL && lp->cardtype != NEW_RIEBL)
1131 return( -EOPNOTSUPP );
1132
1133 if (netif_running(dev)) {
1134 /* Only possible while card isn't started */
1135 DPRINTK( 1, ( "%s: hwaddr can be set only while card isn't open.\n",
1136 dev->name ));
1137 return( -EIO );
1138 }
1139
1140 memcpy( dev->dev_addr, saddr->sa_data, dev->addr_len );
1141 for( i = 0; i < 6; i++ )
1142 MEM->init.hwaddr[i] = dev->dev_addr[i^1]; /* <- 16 bit swap! */
1143 lp->memcpy_f( RIEBL_HWADDR_ADDR, dev->dev_addr, 6 );
1144 /* set also the magic for future sessions */
1145 *RIEBL_MAGIC_ADDR = RIEBL_MAGIC;
1146
1147 return( 0 );
1148 }
1149
1150
1151 #ifdef MODULE
1152 static struct net_device *atarilance_dev;
1153
1154 static int __init atarilance_module_init(void)
1155 {
1156 atarilance_dev = atarilance_probe(-1);
1157 if (IS_ERR(atarilance_dev))
1158 return PTR_ERR(atarilance_dev);
1159 return 0;
1160 }
1161
1162 static void __exit atarilance_module_exit(void)
1163 {
1164 unregister_netdev(atarilance_dev);
1165 free_irq(atarilance_dev->irq, atarilance_dev);
1166 free_netdev(atarilance_dev);
1167 }
1168 module_init(atarilance_module_init);
1169 module_exit(atarilance_module_exit);
1170 #endif /* MODULE */
1171
1172
1173 /*
1174 * Local variables:
1175 * c-indent-level: 4
1176 * tab-width: 4
1177 * End:
1178 */
Linux with added FPC-III support