x86/amd-iommu: Add per IOMMU reference counting
[linux/fpc-iii.git] / drivers / net / bnx2x_init.h
blob65b26cbfe3e74bef00c623c82e8bd880c826387d
1 /* bnx2x_init.h: Broadcom Everest network driver.
2 * Structures and macroes needed during the initialization.
4 * Copyright (c) 2007-2009 Broadcom Corporation
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation.
10 * Maintained by: Eilon Greenstein <eilong@broadcom.com>
11 * Written by: Eliezer Tamir
12 * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
15 #ifndef BNX2X_INIT_H
16 #define BNX2X_INIT_H
18 /* RAM0 size in bytes */
19 #define STORM_INTMEM_SIZE_E1 0x5800
20 #define STORM_INTMEM_SIZE_E1H 0x10000
21 #define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1(bp) ? STORM_INTMEM_SIZE_E1 : \
22 STORM_INTMEM_SIZE_E1H) / 4)
25 /* Init operation types and structures */
26 /* Common for both E1 and E1H */
27 #define OP_RD 0x1 /* read single register */
28 #define OP_WR 0x2 /* write single register */
29 #define OP_IW 0x3 /* write single register using mailbox */
30 #define OP_SW 0x4 /* copy a string to the device */
31 #define OP_SI 0x5 /* copy a string using mailbox */
32 #define OP_ZR 0x6 /* clear memory */
33 #define OP_ZP 0x7 /* unzip then copy with DMAE */
34 #define OP_WR_64 0x8 /* write 64 bit pattern */
35 #define OP_WB 0x9 /* copy a string using DMAE */
37 /* FPGA and EMUL specific operations */
38 #define OP_WR_EMUL 0xa /* write single register on Emulation */
39 #define OP_WR_FPGA 0xb /* write single register on FPGA */
40 #define OP_WR_ASIC 0xc /* write single register on ASIC */
42 /* Init stages */
43 /* Never reorder stages !!! */
44 #define COMMON_STAGE 0
45 #define PORT0_STAGE 1
46 #define PORT1_STAGE 2
47 #define FUNC0_STAGE 3
48 #define FUNC1_STAGE 4
49 #define FUNC2_STAGE 5
50 #define FUNC3_STAGE 6
51 #define FUNC4_STAGE 7
52 #define FUNC5_STAGE 8
53 #define FUNC6_STAGE 9
54 #define FUNC7_STAGE 10
55 #define STAGE_IDX_MAX 11
57 #define STAGE_START 0
58 #define STAGE_END 1
61 /* Indices of blocks */
62 #define PRS_BLOCK 0
63 #define SRCH_BLOCK 1
64 #define TSDM_BLOCK 2
65 #define TCM_BLOCK 3
66 #define BRB1_BLOCK 4
67 #define TSEM_BLOCK 5
68 #define PXPCS_BLOCK 6
69 #define EMAC0_BLOCK 7
70 #define EMAC1_BLOCK 8
71 #define DBU_BLOCK 9
72 #define MISC_BLOCK 10
73 #define DBG_BLOCK 11
74 #define NIG_BLOCK 12
75 #define MCP_BLOCK 13
76 #define UPB_BLOCK 14
77 #define CSDM_BLOCK 15
78 #define USDM_BLOCK 16
79 #define CCM_BLOCK 17
80 #define UCM_BLOCK 18
81 #define USEM_BLOCK 19
82 #define CSEM_BLOCK 20
83 #define XPB_BLOCK 21
84 #define DQ_BLOCK 22
85 #define TIMERS_BLOCK 23
86 #define XSDM_BLOCK 24
87 #define QM_BLOCK 25
88 #define PBF_BLOCK 26
89 #define XCM_BLOCK 27
90 #define XSEM_BLOCK 28
91 #define CDU_BLOCK 29
92 #define DMAE_BLOCK 30
93 #define PXP_BLOCK 31
94 #define CFC_BLOCK 32
95 #define HC_BLOCK 33
96 #define PXP2_BLOCK 34
97 #define MISC_AEU_BLOCK 35
98 #define PGLUE_B_BLOCK 36
99 #define IGU_BLOCK 37
102 /* Returns the index of start or end of a specific block stage in ops array*/
103 #define BLOCK_OPS_IDX(block, stage, end) \
104 (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
107 struct raw_op {
108 u32 op:8;
109 u32 offset:24;
110 u32 raw_data;
113 struct op_read {
114 u32 op:8;
115 u32 offset:24;
116 u32 pad;
119 struct op_write {
120 u32 op:8;
121 u32 offset:24;
122 u32 val;
125 struct op_string_write {
126 u32 op:8;
127 u32 offset:24;
128 #ifdef __LITTLE_ENDIAN
129 u16 data_off;
130 u16 data_len;
131 #else /* __BIG_ENDIAN */
132 u16 data_len;
133 u16 data_off;
134 #endif
137 struct op_zero {
138 u32 op:8;
139 u32 offset:24;
140 u32 len;
143 union init_op {
144 struct op_read read;
145 struct op_write write;
146 struct op_string_write str_wr;
147 struct op_zero zero;
148 struct raw_op raw;
151 #endif /* BNX2X_INIT_H */