drivers/net/wireless/ath/ath9k/rc.h

   1 /*
   2  * Copyright (c) 2004 Sam Leffler, Errno Consulting
   3  * Copyright (c) 2004 Video54 Technologies, Inc.
   4  * Copyright (c) 2008-2009 Atheros Communications Inc.
   5  *
   6  * Permission to use, copy, modify, and/or distribute this software for any
   7  * purpose with or without fee is hereby granted, provided that the above
   8  * copyright notice and this permission notice appear in all copies.
   9  *
  10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  11  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  12  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  13  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  14  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  15  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  16  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  17  */
  18
  19 #ifndef RC_H
  20 #define RC_H
  21
  22 struct ath_softc;
  23
  24 #define ATH_RATE_MAX     30
  25 #define RATE_TABLE_SIZE  64
  26 #define MAX_TX_RATE_PHY  48
  27
  28 /* VALID_ALL - valid for 20/40/Legacy,
  29  * VALID - Legacy only,
  30  * VALID_20 - HT 20 only,
  31  * VALID_40 - HT 40 only */
  32
  33 #define INVALID    0x0
  34 #define VALID      0x1
  35 #define VALID_20   0x2
  36 #define VALID_40   0x4
  37 #define VALID_2040 (VALID_20|VALID_40)
  38 #define VALID_ALL  (VALID_2040|VALID)
  39
  40 enum {
  41         WLAN_RC_PHY_OFDM,
  42         WLAN_RC_PHY_CCK,
  43         WLAN_RC_PHY_HT_20_SS,
  44         WLAN_RC_PHY_HT_20_DS,
  45         WLAN_RC_PHY_HT_40_SS,
  46         WLAN_RC_PHY_HT_40_DS,
  47         WLAN_RC_PHY_HT_20_SS_HGI,
  48         WLAN_RC_PHY_HT_20_DS_HGI,
  49         WLAN_RC_PHY_HT_40_SS_HGI,
  50         WLAN_RC_PHY_HT_40_DS_HGI,
  51         WLAN_RC_PHY_MAX
  52 };
  53
  54 #define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)          \
  55                                 || (_phy == WLAN_RC_PHY_HT_40_DS)       \
  56                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
  57                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
  58 #define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)          \
  59                                 || (_phy == WLAN_RC_PHY_HT_40_DS)       \
  60                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
  61                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
  62 #define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
  63                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
  64                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
  65                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
  66
  67 #define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
  68
  69 #define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ?       \
  70                 (capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID))
  71
  72 /* Return TRUE if flag supports HT20 && client supports HT20 or
  73  * return TRUE if flag supports HT40 && client supports HT40.
  74  * This is used becos some rates overlap between HT20/HT40.
  75  */
  76 #define WLAN_RC_PHY_HT_VALID(flag, capflag)                     \
  77         (((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \
  78          ((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG)))
  79
  80 #define WLAN_RC_DS_FLAG         (0x01)
  81 #define WLAN_RC_40_FLAG         (0x02)
  82 #define WLAN_RC_SGI_FLAG        (0x04)
  83 #define WLAN_RC_HT_FLAG         (0x08)
  84
  85 /**
  86  * struct ath_rate_table - Rate Control table
  87  * @valid: valid for use in rate control
  88  * @valid_single_stream: valid for use in rate control for
  89  *      single stream operation
  90  * @phy: CCK/OFDM
  91  * @ratekbps: rate in Kbits per second
  92  * @user_ratekbps: user rate in Kbits per second
  93  * @ratecode: rate that goes into HW descriptors
  94  * @short_preamble: Mask for enabling short preamble in ratecode for CCK
  95  * @dot11rate: value that goes into supported
  96  *      rates info element of MLME
  97  * @ctrl_rate: Index of next lower basic rate, used for duration computation
  98  * @max_4ms_framelen: maximum frame length(bytes) for tx duration
  99  * @probe_interval: interval for rate control to probe for other rates
 100  * @rssi_reduce_interval: interval for rate control to reduce rssi
 101  * @initial_ratemax: initial ratemax value
 102  */
 103 struct ath_rate_table {
 104         int rate_cnt;
 105         struct {
 106                 int valid;
 107                 int valid_single_stream;
 108                 u8 phy;
 109                 u32 ratekbps;
 110                 u32 user_ratekbps;
 111                 u8 ratecode;
 112                 u8 short_preamble;
 113                 u8 dot11rate;
 114                 u8 ctrl_rate;
 115                 u8 base_index;
 116                 u8 cw40index;
 117                 u8 sgi_index;
 118                 u8 ht_index;
 119                 u32 max_4ms_framelen;
 120         } info[RATE_TABLE_SIZE];
 121         u32 probe_interval;
 122         u8 initial_ratemax;
 123 };
 124
 125 struct ath_rateset {
 126         u8 rs_nrates;
 127         u8 rs_rates[ATH_RATE_MAX];
 128 };
 129
 130 /**
 131  * struct ath_rate_priv - Rate Control priv data
 132  * @state: RC state
 133  * @probe_rate: rate we are probing at
 134  * @probe_time: msec timestamp for last probe
 135  * @hw_maxretry_pktcnt: num of packets since we got HW max retry error
 136  * @max_valid_rate: maximum number of valid rate
 137  * @per_down_time: msec timestamp for last PER down step
 138  * @valid_phy_ratecnt: valid rate count
 139  * @rate_max_phy: phy index for the max rate
 140  * @per: PER for every valid rate in %
 141  * @probe_interval: interval for ratectrl to probe for other rates
 142  * @prev_data_rix: rate idx of last data frame
 143  * @ht_cap: HT capabilities
 144  * @neg_rates: Negotatied rates
 145  * @neg_ht_rates: Negotiated HT rates
 146  */
 147 struct ath_rate_priv {
 148         u8 rate_table_size;
 149         u8 probe_rate;
 150         u8 hw_maxretry_pktcnt;
 151         u8 max_valid_rate;
 152         u8 valid_rate_index[RATE_TABLE_SIZE];
 153         u8 ht_cap;
 154         u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
 155         u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
 156         u8 rate_max_phy;
 157         u8 per[RATE_TABLE_SIZE];
 158         u32 probe_time;
 159         u32 per_down_time;
 160         u32 probe_interval;
 161         u32 prev_data_rix;
 162         u32 tx_triglevel_max;
 163         struct ath_rateset neg_rates;
 164         struct ath_rateset neg_ht_rates;
 165         struct ath_rate_softc *asc;
 166 };
 167
 168 enum ath9k_internal_frame_type {
 169         ATH9K_NOT_INTERNAL,
 170         ATH9K_INT_PAUSE,
 171         ATH9K_INT_UNPAUSE
 172 };
 173
 174 struct ath_tx_info_priv {
 175         struct ath_wiphy *aphy;
 176         struct ath_tx_status tx;
 177         int n_frames;
 178         int n_bad_frames;
 179         bool update_rc;
 180         enum ath9k_internal_frame_type frame_type;
 181 };
 182
 183 #define ATH_TX_INFO_PRIV(tx_info) \
 184         ((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
 185
 186 void ath_rate_attach(struct ath_softc *sc);
 187 u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
 188 int ath_rate_control_register(void);
 189 void ath_rate_control_unregister(void);
 190
 191 #endif /* RC_H */