2 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/kernel.h>
18 #include <linux/slab.h>
19 #include <net/cfg80211.h>
20 #include <net/mac80211.h>
22 #include "regd_common.h"
25 * This is a set of common rules used by our world regulatory domains.
26 * We have 12 world regulatory domains. To save space we consolidate
27 * the regulatory domains in 5 structures by frequency and change
28 * the flags on our reg_notifier() on a case by case basis.
31 /* Only these channels all allow active scan on all world regulatory domains */
32 #define ATH9K_2GHZ_CH01_11 REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
34 /* We enable active scan on these a case by case basis by regulatory domain */
35 #define ATH9K_2GHZ_CH12_13 REG_RULE(2467-10, 2472+10, 40, 0, 20,\
36 NL80211_RRF_PASSIVE_SCAN)
37 #define ATH9K_2GHZ_CH14 REG_RULE(2484-10, 2484+10, 40, 0, 20,\
38 NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_OFDM)
40 /* We allow IBSS on these on a case by case basis by regulatory domain */
41 #define ATH9K_5GHZ_5150_5350 REG_RULE(5150-10, 5350+10, 40, 0, 30,\
42 NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
43 #define ATH9K_5GHZ_5470_5850 REG_RULE(5470-10, 5850+10, 40, 0, 30,\
44 NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
45 #define ATH9K_5GHZ_5725_5850 REG_RULE(5725-10, 5850+10, 40, 0, 30,\
46 NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
48 #define ATH9K_2GHZ_ALL ATH9K_2GHZ_CH01_11, \
52 #define ATH9K_5GHZ_ALL ATH9K_5GHZ_5150_5350, \
54 /* This one skips what we call "mid band" */
55 #define ATH9K_5GHZ_NO_MIDBAND ATH9K_5GHZ_5150_5350, \
60 static const struct ieee80211_regdomain ath_world_regdom_60_61_62
= {
69 /* Can be used by 0x63 and 0x65 */
70 static const struct ieee80211_regdomain ath_world_regdom_63_65
= {
76 ATH9K_5GHZ_NO_MIDBAND
,
80 /* Can be used by 0x64 only */
81 static const struct ieee80211_regdomain ath_world_regdom_64
= {
86 ATH9K_5GHZ_NO_MIDBAND
,
90 /* Can be used by 0x66 and 0x69 */
91 static const struct ieee80211_regdomain ath_world_regdom_66_69
= {
100 /* Can be used by 0x67, 0x6A and 0x68 */
101 static const struct ieee80211_regdomain ath_world_regdom_67_68_6A
= {
111 static inline bool is_wwr_sku(u16 regd
)
113 return ((regd
& WORLD_SKU_MASK
) == WORLD_SKU_PREFIX
) ||
117 static u16
ath_regd_get_eepromRD(struct ath_regulatory
*reg
)
119 return reg
->current_rd
& ~WORLDWIDE_ROAMING_FLAG
;
122 bool ath_is_world_regd(struct ath_regulatory
*reg
)
124 return is_wwr_sku(ath_regd_get_eepromRD(reg
));
126 EXPORT_SYMBOL(ath_is_world_regd
);
128 static const struct ieee80211_regdomain
*ath_default_world_regdomain(void)
130 /* this is the most restrictive */
131 return &ath_world_regdom_64
;
135 ieee80211_regdomain
*ath_world_regdomain(struct ath_regulatory
*reg
)
137 switch (reg
->regpair
->regDmnEnum
) {
141 return &ath_world_regdom_60_61_62
;
144 return &ath_world_regdom_63_65
;
146 return &ath_world_regdom_64
;
149 return &ath_world_regdom_66_69
;
153 return &ath_world_regdom_67_68_6A
;
156 return ath_default_world_regdomain();
160 /* Frequency is one where radar detection is required */
161 static bool ath_is_radar_freq(u16 center_freq
)
163 return (center_freq
>= 5260 && center_freq
<= 5700);
167 * N.B: These exception rules do not apply radar freqs.
169 * - We enable adhoc (or beaconing) if allowed by 11d
170 * - We enable active scan if the channel is allowed by 11d
171 * - If no country IE has been processed and a we determine we have
172 * received a beacon on a channel we can enable active scan and
173 * adhoc (or beaconing).
176 ath_reg_apply_beaconing_flags(struct wiphy
*wiphy
,
177 enum nl80211_reg_initiator initiator
)
179 enum ieee80211_band band
;
180 struct ieee80211_supported_band
*sband
;
181 const struct ieee80211_reg_rule
*reg_rule
;
182 struct ieee80211_channel
*ch
;
187 for (band
= 0; band
< IEEE80211_NUM_BANDS
; band
++) {
189 if (!wiphy
->bands
[band
])
192 sband
= wiphy
->bands
[band
];
194 for (i
= 0; i
< sband
->n_channels
; i
++) {
196 ch
= &sband
->channels
[i
];
198 if (ath_is_radar_freq(ch
->center_freq
) ||
199 (ch
->flags
& IEEE80211_CHAN_RADAR
))
202 if (initiator
== NL80211_REGDOM_SET_BY_COUNTRY_IE
) {
203 r
= freq_reg_info(wiphy
,
210 * If 11d had a rule for this channel ensure
211 * we enable adhoc/beaconing if it allows us to
212 * use it. Note that we would have disabled it
213 * by applying our static world regdomain by
214 * default during init, prior to calling our
217 if (!(reg_rule
->flags
&
218 NL80211_RRF_NO_IBSS
))
220 ~IEEE80211_CHAN_NO_IBSS
;
221 if (!(reg_rule
->flags
&
222 NL80211_RRF_PASSIVE_SCAN
))
224 ~IEEE80211_CHAN_PASSIVE_SCAN
;
226 if (ch
->beacon_found
)
227 ch
->flags
&= ~(IEEE80211_CHAN_NO_IBSS
|
228 IEEE80211_CHAN_PASSIVE_SCAN
);
235 /* Allows active scan scan on Ch 12 and 13 */
237 ath_reg_apply_active_scan_flags(struct wiphy
*wiphy
,
238 enum nl80211_reg_initiator initiator
)
240 struct ieee80211_supported_band
*sband
;
241 struct ieee80211_channel
*ch
;
242 const struct ieee80211_reg_rule
*reg_rule
;
246 sband
= wiphy
->bands
[IEEE80211_BAND_2GHZ
];
249 * If no country IE has been received always enable active scan
250 * on these channels. This is only done for specific regulatory SKUs
252 if (initiator
!= NL80211_REGDOM_SET_BY_COUNTRY_IE
) {
253 ch
= &sband
->channels
[11]; /* CH 12 */
254 if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
255 ch
->flags
&= ~IEEE80211_CHAN_PASSIVE_SCAN
;
256 ch
= &sband
->channels
[12]; /* CH 13 */
257 if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
258 ch
->flags
&= ~IEEE80211_CHAN_PASSIVE_SCAN
;
263 * If a country IE has been recieved check its rule for this
264 * channel first before enabling active scan. The passive scan
265 * would have been enforced by the initial processing of our
266 * custom regulatory domain.
269 ch
= &sband
->channels
[11]; /* CH 12 */
270 r
= freq_reg_info(wiphy
, ch
->center_freq
, bandwidth
, ®_rule
);
272 if (!(reg_rule
->flags
& NL80211_RRF_PASSIVE_SCAN
))
273 if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
274 ch
->flags
&= ~IEEE80211_CHAN_PASSIVE_SCAN
;
277 ch
= &sband
->channels
[12]; /* CH 13 */
278 r
= freq_reg_info(wiphy
, ch
->center_freq
, bandwidth
, ®_rule
);
280 if (!(reg_rule
->flags
& NL80211_RRF_PASSIVE_SCAN
))
281 if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
282 ch
->flags
&= ~IEEE80211_CHAN_PASSIVE_SCAN
;
286 /* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
287 static void ath_reg_apply_radar_flags(struct wiphy
*wiphy
)
289 struct ieee80211_supported_band
*sband
;
290 struct ieee80211_channel
*ch
;
293 if (!wiphy
->bands
[IEEE80211_BAND_5GHZ
])
296 sband
= wiphy
->bands
[IEEE80211_BAND_5GHZ
];
298 for (i
= 0; i
< sband
->n_channels
; i
++) {
299 ch
= &sband
->channels
[i
];
300 if (!ath_is_radar_freq(ch
->center_freq
))
302 /* We always enable radar detection/DFS on this
303 * frequency range. Additionally we also apply on
304 * this frequency range:
305 * - If STA mode does not yet have DFS supports disable
307 * - If adhoc mode does not support DFS yet then
308 * disable adhoc in the frequency.
309 * - If AP mode does not yet support radar detection/DFS
310 * do not allow AP mode
312 if (!(ch
->flags
& IEEE80211_CHAN_DISABLED
))
313 ch
->flags
|= IEEE80211_CHAN_RADAR
|
314 IEEE80211_CHAN_NO_IBSS
|
315 IEEE80211_CHAN_PASSIVE_SCAN
;
319 static void ath_reg_apply_world_flags(struct wiphy
*wiphy
,
320 enum nl80211_reg_initiator initiator
,
321 struct ath_regulatory
*reg
)
323 switch (reg
->regpair
->regDmnEnum
) {
328 ath_reg_apply_beaconing_flags(wiphy
, initiator
);
331 ath_reg_apply_beaconing_flags(wiphy
, initiator
);
332 ath_reg_apply_active_scan_flags(wiphy
, initiator
);
338 int ath_reg_notifier_apply(struct wiphy
*wiphy
,
339 struct regulatory_request
*request
,
340 struct ath_regulatory
*reg
)
342 /* We always apply this */
343 ath_reg_apply_radar_flags(wiphy
);
345 switch (request
->initiator
) {
346 case NL80211_REGDOM_SET_BY_DRIVER
:
347 case NL80211_REGDOM_SET_BY_CORE
:
348 case NL80211_REGDOM_SET_BY_USER
:
350 case NL80211_REGDOM_SET_BY_COUNTRY_IE
:
351 if (ath_is_world_regd(reg
))
352 ath_reg_apply_world_flags(wiphy
, request
->initiator
,
359 EXPORT_SYMBOL(ath_reg_notifier_apply
);
361 static bool ath_regd_is_eeprom_valid(struct ath_regulatory
*reg
)
363 u16 rd
= ath_regd_get_eepromRD(reg
);
366 if (rd
& COUNTRY_ERD_FLAG
) {
367 /* EEPROM value is a country code */
368 u16 cc
= rd
& ~COUNTRY_ERD_FLAG
;
370 "ath: EEPROM indicates we should expect "
372 for (i
= 0; i
< ARRAY_SIZE(allCountries
); i
++)
373 if (allCountries
[i
].countryCode
== cc
)
376 /* EEPROM value is a regpair value */
377 if (rd
!= CTRY_DEFAULT
)
378 printk(KERN_DEBUG
"ath: EEPROM indicates we "
379 "should expect a direct regpair map\n");
380 for (i
= 0; i
< ARRAY_SIZE(regDomainPairs
); i
++)
381 if (regDomainPairs
[i
].regDmnEnum
== rd
)
385 "ath: invalid regulatory domain/country code 0x%x\n", rd
);
389 /* EEPROM country code to regpair mapping */
390 static struct country_code_to_enum_rd
*
391 ath_regd_find_country(u16 countryCode
)
395 for (i
= 0; i
< ARRAY_SIZE(allCountries
); i
++) {
396 if (allCountries
[i
].countryCode
== countryCode
)
397 return &allCountries
[i
];
402 /* EEPROM rd code to regpair mapping */
403 static struct country_code_to_enum_rd
*
404 ath_regd_find_country_by_rd(int regdmn
)
408 for (i
= 0; i
< ARRAY_SIZE(allCountries
); i
++) {
409 if (allCountries
[i
].regDmnEnum
== regdmn
)
410 return &allCountries
[i
];
415 /* Returns the map of the EEPROM set RD to a country code */
416 static u16
ath_regd_get_default_country(u16 rd
)
418 if (rd
& COUNTRY_ERD_FLAG
) {
419 struct country_code_to_enum_rd
*country
= NULL
;
420 u16 cc
= rd
& ~COUNTRY_ERD_FLAG
;
422 country
= ath_regd_find_country(cc
);
430 static struct reg_dmn_pair_mapping
*
431 ath_get_regpair(int regdmn
)
435 if (regdmn
== NO_ENUMRD
)
437 for (i
= 0; i
< ARRAY_SIZE(regDomainPairs
); i
++) {
438 if (regDomainPairs
[i
].regDmnEnum
== regdmn
)
439 return ®DomainPairs
[i
];
445 ath_regd_init_wiphy(struct ath_regulatory
*reg
,
447 int (*reg_notifier
)(struct wiphy
*wiphy
,
448 struct regulatory_request
*request
))
450 const struct ieee80211_regdomain
*regd
;
452 wiphy
->reg_notifier
= reg_notifier
;
453 wiphy
->strict_regulatory
= true;
455 if (ath_is_world_regd(reg
)) {
457 * Anything applied here (prior to wiphy registration) gets
458 * saved on the wiphy orig_* parameters
460 regd
= ath_world_regdomain(reg
);
461 wiphy
->custom_regulatory
= true;
462 wiphy
->strict_regulatory
= false;
465 * This gets applied in the case of the absense of CRDA,
466 * it's our own custom world regulatory domain, similar to
467 * cfg80211's but we enable passive scanning.
469 regd
= ath_default_world_regdomain();
471 wiphy_apply_custom_regulatory(wiphy
, regd
);
472 ath_reg_apply_radar_flags(wiphy
);
473 ath_reg_apply_world_flags(wiphy
, NL80211_REGDOM_SET_BY_DRIVER
, reg
);
478 * Some users have reported their EEPROM programmed with
479 * 0x8000 set, this is not a supported regulatory domain
480 * but since we have more than one user with it we need
481 * a solution for them. We default to 0x64, which is the
482 * default Atheros world regulatory domain.
484 static void ath_regd_sanitize(struct ath_regulatory
*reg
)
486 if (reg
->current_rd
!= COUNTRY_ERD_FLAG
)
488 printk(KERN_DEBUG
"ath: EEPROM regdomain sanitized\n");
489 reg
->current_rd
= 0x64;
493 ath_regd_init(struct ath_regulatory
*reg
,
495 int (*reg_notifier
)(struct wiphy
*wiphy
,
496 struct regulatory_request
*request
))
498 struct country_code_to_enum_rd
*country
= NULL
;
504 ath_regd_sanitize(reg
);
506 printk(KERN_DEBUG
"ath: EEPROM regdomain: 0x%0x\n", reg
->current_rd
);
508 if (!ath_regd_is_eeprom_valid(reg
)) {
509 printk(KERN_ERR
"ath: Invalid EEPROM contents\n");
513 regdmn
= ath_regd_get_eepromRD(reg
);
514 reg
->country_code
= ath_regd_get_default_country(regdmn
);
516 if (reg
->country_code
== CTRY_DEFAULT
&&
517 regdmn
== CTRY_DEFAULT
) {
518 printk(KERN_DEBUG
"ath: EEPROM indicates default "
519 "country code should be used\n");
520 reg
->country_code
= CTRY_UNITED_STATES
;
523 if (reg
->country_code
== CTRY_DEFAULT
) {
526 printk(KERN_DEBUG
"ath: doing EEPROM country->regdmn "
528 country
= ath_regd_find_country(reg
->country_code
);
529 if (country
== NULL
) {
531 "ath: no valid country maps found for "
532 "country code: 0x%0x\n",
536 regdmn
= country
->regDmnEnum
;
537 printk(KERN_DEBUG
"ath: country maps to "
538 "regdmn code: 0x%0x\n",
543 reg
->regpair
= ath_get_regpair(regdmn
);
546 printk(KERN_DEBUG
"ath: "
547 "No regulatory domain pair found, cannot continue\n");
552 country
= ath_regd_find_country_by_rd(regdmn
);
555 reg
->alpha2
[0] = country
->isoName
[0];
556 reg
->alpha2
[1] = country
->isoName
[1];
558 reg
->alpha2
[0] = '0';
559 reg
->alpha2
[1] = '0';
562 printk(KERN_DEBUG
"ath: Country alpha2 being used: %c%c\n",
563 reg
->alpha2
[0], reg
->alpha2
[1]);
564 printk(KERN_DEBUG
"ath: Regpair used: 0x%0x\n",
565 reg
->regpair
->regDmnEnum
);
567 ath_regd_init_wiphy(reg
, wiphy
, reg_notifier
);
570 EXPORT_SYMBOL(ath_regd_init
);
572 u32
ath_regd_get_band_ctl(struct ath_regulatory
*reg
,
573 enum ieee80211_band band
)
576 (reg
->country_code
== CTRY_DEFAULT
&&
577 is_wwr_sku(ath_regd_get_eepromRD(reg
)))) {
582 case IEEE80211_BAND_2GHZ
:
583 return reg
->regpair
->reg_2ghz_ctl
;
584 case IEEE80211_BAND_5GHZ
:
585 return reg
->regpair
->reg_5ghz_ctl
;
590 EXPORT_SYMBOL(ath_regd_get_band_ctl
);