x86/amd-iommu: Add per IOMMU reference counting
[linux/fpc-iii.git] / drivers / video / hpfb.c
blobb8ebff1e8493e2290b21530ad5086b5d55172089
1 /*
2 * HP300 Topcat framebuffer support (derived from macfb of all things)
3 * Phil Blundell <philb@gnu.org> 1998
4 * DIO-II, colour map and Catseye support by
5 * Kars de Jong <jongk@linux-m68k.org>, May 2004.
6 */
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/errno.h>
11 #include <linux/string.h>
12 #include <linux/mm.h>
13 #include <linux/slab.h>
14 #include <linux/delay.h>
15 #include <linux/init.h>
16 #include <linux/fb.h>
17 #include <linux/dio.h>
19 #include <asm/io.h>
20 #include <asm/uaccess.h>
22 static struct fb_info fb_info = {
23 .fix = {
24 .id = "HP300 ",
25 .type = FB_TYPE_PACKED_PIXELS,
26 .visual = FB_VISUAL_PSEUDOCOLOR,
27 .accel = FB_ACCEL_NONE,
31 static unsigned long fb_regs;
32 static unsigned char fb_bitmask;
34 #define TC_NBLANK 0x4080
35 #define TC_WEN 0x4088
36 #define TC_REN 0x408c
37 #define TC_FBEN 0x4090
38 #define TC_PRR 0x40ea
40 /* These defines match the X window system */
41 #define RR_CLEAR 0x0
42 #define RR_COPY 0x3
43 #define RR_NOOP 0x5
44 #define RR_XOR 0x6
45 #define RR_INVERT 0xa
46 #define RR_COPYINVERTED 0xc
47 #define RR_SET 0xf
49 /* blitter regs */
50 #define BUSY 0x4044
51 #define WMRR 0x40ef
52 #define SOURCE_X 0x40f2
53 #define SOURCE_Y 0x40f6
54 #define DEST_X 0x40fa
55 #define DEST_Y 0x40fe
56 #define WHEIGHT 0x4106
57 #define WWIDTH 0x4102
58 #define WMOVE 0x409c
60 static struct fb_var_screeninfo hpfb_defined = {
61 .red = {
62 .length = 8,
64 .green = {
65 .length = 8,
67 .blue = {
68 .length = 8,
70 .activate = FB_ACTIVATE_NOW,
71 .height = -1,
72 .width = -1,
73 .vmode = FB_VMODE_NONINTERLACED,
76 static int hpfb_setcolreg(unsigned regno, unsigned red, unsigned green,
77 unsigned blue, unsigned transp,
78 struct fb_info *info)
80 /* use MSBs */
81 unsigned char _red =red>>8;
82 unsigned char _green=green>>8;
83 unsigned char _blue =blue>>8;
84 unsigned char _regno=regno;
87 * Set a single color register. The values supplied are
88 * already rounded down to the hardware's capabilities
89 * (according to the entries in the `var' structure). Return
90 * != 0 for invalid regno.
93 if (regno >= info->cmap.len)
94 return 1;
96 while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1);
98 out_be16(fb_regs + 0x60ba, 0xff);
100 out_be16(fb_regs + 0x60b2, _red);
101 out_be16(fb_regs + 0x60b4, _green);
102 out_be16(fb_regs + 0x60b6, _blue);
103 out_be16(fb_regs + 0x60b8, ~_regno);
104 out_be16(fb_regs + 0x60f0, 0xff);
106 udelay(100);
108 while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1);
109 out_be16(fb_regs + 0x60b2, 0);
110 out_be16(fb_regs + 0x60b4, 0);
111 out_be16(fb_regs + 0x60b6, 0);
112 out_be16(fb_regs + 0x60b8, 0);
114 return 0;
117 /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
119 static int hpfb_blank(int blank, struct fb_info *info)
121 out_8(fb_regs + TC_NBLANK, (blank ? 0x00 : fb_bitmask));
123 return 0;
126 static void topcat_blit(int x0, int y0, int x1, int y1, int w, int h, int rr)
128 if (rr >= 0) {
129 while (in_8(fb_regs + BUSY) & fb_bitmask)
132 out_8(fb_regs + TC_FBEN, fb_bitmask);
133 if (rr >= 0) {
134 out_8(fb_regs + TC_WEN, fb_bitmask);
135 out_8(fb_regs + WMRR, rr);
137 out_be16(fb_regs + SOURCE_X, x0);
138 out_be16(fb_regs + SOURCE_Y, y0);
139 out_be16(fb_regs + DEST_X, x1);
140 out_be16(fb_regs + DEST_Y, y1);
141 out_be16(fb_regs + WWIDTH, w);
142 out_be16(fb_regs + WHEIGHT, h);
143 out_8(fb_regs + WMOVE, fb_bitmask);
146 static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
148 topcat_blit(area->sx, area->sy, area->dx, area->dy, area->width, area->height, RR_COPY);
151 static void hpfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
153 u8 clr;
155 clr = region->color & 0xff;
157 while (in_8(fb_regs + BUSY) & fb_bitmask)
160 /* Foreground */
161 out_8(fb_regs + TC_WEN, fb_bitmask & clr);
162 out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_SET : RR_INVERT));
164 /* Background */
165 out_8(fb_regs + TC_WEN, fb_bitmask & ~clr);
166 out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_CLEAR : RR_NOOP));
168 topcat_blit(region->dx, region->dy, region->dx, region->dy, region->width, region->height, -1);
171 static int hpfb_sync(struct fb_info *info)
174 * Since we also access the framebuffer directly, we have to wait
175 * until the block mover is finished
177 while (in_8(fb_regs + BUSY) & fb_bitmask)
180 out_8(fb_regs + TC_WEN, fb_bitmask);
181 out_8(fb_regs + TC_PRR, RR_COPY);
182 out_8(fb_regs + TC_FBEN, fb_bitmask);
184 return 0;
187 static struct fb_ops hpfb_ops = {
188 .owner = THIS_MODULE,
189 .fb_setcolreg = hpfb_setcolreg,
190 .fb_blank = hpfb_blank,
191 .fb_fillrect = hpfb_fillrect,
192 .fb_copyarea = hpfb_copyarea,
193 .fb_imageblit = cfb_imageblit,
194 .fb_sync = hpfb_sync,
197 /* Common to all HP framebuffers */
198 #define HPFB_FBWMSB 0x05 /* Frame buffer width */
199 #define HPFB_FBWLSB 0x07
200 #define HPFB_FBHMSB 0x09 /* Frame buffer height */
201 #define HPFB_FBHLSB 0x0b
202 #define HPFB_DWMSB 0x0d /* Display width */
203 #define HPFB_DWLSB 0x0f
204 #define HPFB_DHMSB 0x11 /* Display height */
205 #define HPFB_DHLSB 0x13
206 #define HPFB_NUMPLANES 0x5b /* Number of colour planes */
207 #define HPFB_FBOMSB 0x5d /* Frame buffer offset */
208 #define HPFB_FBOLSB 0x5f
210 static int __devinit hpfb_init_one(unsigned long phys_base,
211 unsigned long virt_base)
213 unsigned long fboff, fb_width, fb_height, fb_start;
215 fb_regs = virt_base;
216 fboff = (in_8(fb_regs + HPFB_FBOMSB) << 8) | in_8(fb_regs + HPFB_FBOLSB);
218 fb_info.fix.smem_start = (in_8(fb_regs + fboff) << 16);
220 if (phys_base >= DIOII_BASE) {
221 fb_info.fix.smem_start += phys_base;
224 if (DIO_SECID(fb_regs) != DIO_ID2_TOPCAT) {
225 /* This is the magic incantation the HP X server uses to make Catseye boards work. */
226 while (in_be16(fb_regs+0x4800) & 1)
228 out_be16(fb_regs+0x4800, 0); /* Catseye status */
229 out_be16(fb_regs+0x4510, 0); /* VB */
230 out_be16(fb_regs+0x4512, 0); /* TCNTRL */
231 out_be16(fb_regs+0x4514, 0); /* ACNTRL */
232 out_be16(fb_regs+0x4516, 0); /* PNCNTRL */
233 out_be16(fb_regs+0x4206, 0x90); /* RUG Command/Status */
234 out_be16(fb_regs+0x60a2, 0); /* Overlay Mask */
235 out_be16(fb_regs+0x60bc, 0); /* Ram Select */
239 * Fill in the available video resolution
241 fb_width = (in_8(fb_regs + HPFB_FBWMSB) << 8) | in_8(fb_regs + HPFB_FBWLSB);
242 fb_info.fix.line_length = fb_width;
243 fb_height = (in_8(fb_regs + HPFB_FBHMSB) << 8) | in_8(fb_regs + HPFB_FBHLSB);
244 fb_info.fix.smem_len = fb_width * fb_height;
245 fb_start = (unsigned long)ioremap_writethrough(fb_info.fix.smem_start,
246 fb_info.fix.smem_len);
247 hpfb_defined.xres = (in_8(fb_regs + HPFB_DWMSB) << 8) | in_8(fb_regs + HPFB_DWLSB);
248 hpfb_defined.yres = (in_8(fb_regs + HPFB_DHMSB) << 8) | in_8(fb_regs + HPFB_DHLSB);
249 hpfb_defined.xres_virtual = hpfb_defined.xres;
250 hpfb_defined.yres_virtual = hpfb_defined.yres;
251 hpfb_defined.bits_per_pixel = in_8(fb_regs + HPFB_NUMPLANES);
253 printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n",
254 fb_info.fix.smem_start, fb_start, fb_info.fix.smem_len/1024);
255 printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n",
256 hpfb_defined.xres, hpfb_defined.yres, hpfb_defined.bits_per_pixel, fb_info.fix.line_length);
259 * Give the hardware a bit of a prod and work out how many bits per
260 * pixel are supported.
262 out_8(fb_regs + TC_WEN, 0xff);
263 out_8(fb_regs + TC_PRR, RR_COPY);
264 out_8(fb_regs + TC_FBEN, 0xff);
265 out_8(fb_start, 0xff);
266 fb_bitmask = in_8(fb_start);
267 out_8(fb_start, 0);
270 * Enable reading/writing of all the planes.
272 out_8(fb_regs + TC_WEN, fb_bitmask);
273 out_8(fb_regs + TC_PRR, RR_COPY);
274 out_8(fb_regs + TC_REN, fb_bitmask);
275 out_8(fb_regs + TC_FBEN, fb_bitmask);
278 * Clear the screen.
280 topcat_blit(0, 0, 0, 0, fb_width, fb_height, RR_CLEAR);
283 * Let there be consoles..
285 if (DIO_SECID(fb_regs) == DIO_ID2_TOPCAT)
286 strcat(fb_info.fix.id, "Topcat");
287 else
288 strcat(fb_info.fix.id, "Catseye");
289 fb_info.fbops = &hpfb_ops;
290 fb_info.flags = FBINFO_DEFAULT;
291 fb_info.var = hpfb_defined;
292 fb_info.screen_base = (char *)fb_start;
294 fb_alloc_cmap(&fb_info.cmap, 1 << hpfb_defined.bits_per_pixel, 0);
296 if (register_framebuffer(&fb_info) < 0) {
297 fb_dealloc_cmap(&fb_info.cmap);
298 iounmap(fb_info.screen_base);
299 fb_info.screen_base = NULL;
300 return 1;
303 printk(KERN_INFO "fb%d: %s frame buffer device\n",
304 fb_info.node, fb_info.fix.id);
306 return 0;
310 * Check that the secondary ID indicates that we have some hope of working with this
311 * framebuffer. The catseye boards are pretty much like topcats and we can muddle through.
314 #define topcat_sid_ok(x) (((x) == DIO_ID2_LRCATSEYE) || ((x) == DIO_ID2_HRCCATSEYE) \
315 || ((x) == DIO_ID2_HRMCATSEYE) || ((x) == DIO_ID2_TOPCAT))
318 * Initialise the framebuffer
320 static int __devinit hpfb_dio_probe(struct dio_dev * d, const struct dio_device_id * ent)
322 unsigned long paddr, vaddr;
324 paddr = d->resource.start;
325 if (!request_mem_region(d->resource.start, d->resource.end - d->resource.start, d->name))
326 return -EBUSY;
328 if (d->scode >= DIOII_SCBASE) {
329 vaddr = (unsigned long)ioremap(paddr, d->resource.end - d->resource.start);
330 } else {
331 vaddr = paddr + DIO_VIRADDRBASE;
333 printk(KERN_INFO "Topcat found at DIO select code %d "
334 "(secondary id %02x)\n", d->scode, (d->id >> 8) & 0xff);
335 if (hpfb_init_one(paddr, vaddr)) {
336 if (d->scode >= DIOII_SCBASE)
337 iounmap((void *)vaddr);
338 return -ENOMEM;
340 return 0;
343 static void __devexit hpfb_remove_one(struct dio_dev *d)
345 unregister_framebuffer(&fb_info);
346 if (d->scode >= DIOII_SCBASE)
347 iounmap((void *)fb_regs);
348 release_mem_region(d->resource.start, d->resource.end - d->resource.start);
351 static struct dio_device_id hpfb_dio_tbl[] = {
352 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_LRCATSEYE) },
353 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRCCATSEYE) },
354 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRMCATSEYE) },
355 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_TOPCAT) },
356 { 0 }
359 static struct dio_driver hpfb_driver = {
360 .name = "hpfb",
361 .id_table = hpfb_dio_tbl,
362 .probe = hpfb_dio_probe,
363 .remove = __devexit_p(hpfb_remove_one),
366 int __init hpfb_init(void)
368 unsigned int sid;
369 mm_segment_t fs;
370 unsigned char i;
371 int err;
373 /* Topcats can be on the internal IO bus or real DIO devices.
374 * The internal variant sits at 0x560000; it has primary
375 * and secondary ID registers just like the DIO version.
376 * So we merge the two detection routines.
378 * Perhaps this #define should be in a global header file:
379 * I believe it's common to all internal fbs, not just topcat.
381 #define INTFBVADDR 0xf0560000
382 #define INTFBPADDR 0x560000
384 if (!MACH_IS_HP300)
385 return -ENODEV;
387 if (fb_get_options("hpfb", NULL))
388 return -ENODEV;
390 err = dio_register_driver(&hpfb_driver);
391 if (err)
392 return err;
394 fs = get_fs();
395 set_fs(KERNEL_DS);
396 err = get_user(i, (unsigned char *)INTFBVADDR + DIO_IDOFF);
397 set_fs(fs);
399 if (!err && (i == DIO_ID_FBUFFER) && topcat_sid_ok(sid = DIO_SECID(INTFBVADDR))) {
400 if (!request_mem_region(INTFBPADDR, DIO_DEVSIZE, "Internal Topcat"))
401 return -EBUSY;
402 printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid);
403 if (hpfb_init_one(INTFBPADDR, INTFBVADDR)) {
404 return -ENOMEM;
407 return 0;
410 void __exit hpfb_cleanup_module(void)
412 dio_unregister_driver(&hpfb_driver);
415 module_init(hpfb_init);
416 module_exit(hpfb_cleanup_module);
418 MODULE_LICENSE("GPL");