Merge 3.9-rc3 into staging-next
[linux/fpc-iii.git] / drivers / cpufreq / kirkwood-cpufreq.c
blob0e83e3c24f5b829b61eb77b880c815b4d6d58c83
1 /*
2 * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
4 * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/clk.h>
15 #include <linux/clk-provider.h>
16 #include <linux/cpufreq.h>
17 #include <linux/of.h>
18 #include <linux/platform_device.h>
19 #include <linux/io.h>
20 #include <asm/proc-fns.h>
22 #define CPU_SW_INT_BLK BIT(28)
24 static struct priv
26 struct clk *cpu_clk;
27 struct clk *ddr_clk;
28 struct clk *powersave_clk;
29 struct device *dev;
30 void __iomem *base;
31 } priv;
33 #define STATE_CPU_FREQ 0x01
34 #define STATE_DDR_FREQ 0x02
37 * Kirkwood can swap the clock to the CPU between two clocks:
39 * - cpu clk
40 * - ddr clk
42 * The frequencies are set at runtime before registering this *
43 * table.
45 static struct cpufreq_frequency_table kirkwood_freq_table[] = {
46 {STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
47 {STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
48 {0, CPUFREQ_TABLE_END},
51 static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
53 if (__clk_is_enabled(priv.powersave_clk))
54 return kirkwood_freq_table[1].frequency;
55 return kirkwood_freq_table[0].frequency;
58 static void kirkwood_cpufreq_set_cpu_state(unsigned int index)
60 struct cpufreq_freqs freqs;
61 unsigned int state = kirkwood_freq_table[index].index;
62 unsigned long reg;
64 freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
65 freqs.new = kirkwood_freq_table[index].frequency;
66 freqs.cpu = 0; /* Kirkwood is UP */
68 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
70 dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n",
71 kirkwood_freq_table[index].frequency);
72 dev_dbg(priv.dev, "old frequency was %i KHz\n",
73 kirkwood_cpufreq_get_cpu_frequency(0));
75 if (freqs.old != freqs.new) {
76 local_irq_disable();
78 /* Disable interrupts to the CPU */
79 reg = readl_relaxed(priv.base);
80 reg |= CPU_SW_INT_BLK;
81 writel_relaxed(reg, priv.base);
83 switch (state) {
84 case STATE_CPU_FREQ:
85 clk_disable(priv.powersave_clk);
86 break;
87 case STATE_DDR_FREQ:
88 clk_enable(priv.powersave_clk);
89 break;
92 /* Wait-for-Interrupt, while the hardware changes frequency */
93 cpu_do_idle();
95 /* Enable interrupts to the CPU */
96 reg = readl_relaxed(priv.base);
97 reg &= ~CPU_SW_INT_BLK;
98 writel_relaxed(reg, priv.base);
100 local_irq_enable();
102 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
105 static int kirkwood_cpufreq_verify(struct cpufreq_policy *policy)
107 return cpufreq_frequency_table_verify(policy, kirkwood_freq_table);
110 static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
111 unsigned int target_freq,
112 unsigned int relation)
114 unsigned int index = 0;
116 if (cpufreq_frequency_table_target(policy, kirkwood_freq_table,
117 target_freq, relation, &index))
118 return -EINVAL;
120 kirkwood_cpufreq_set_cpu_state(index);
122 return 0;
125 /* Module init and exit code */
126 static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
128 int result;
130 /* cpuinfo and default policy values */
131 policy->cpuinfo.transition_latency = 5000; /* 5uS */
132 policy->cur = kirkwood_cpufreq_get_cpu_frequency(0);
134 result = cpufreq_frequency_table_cpuinfo(policy, kirkwood_freq_table);
135 if (result)
136 return result;
138 cpufreq_frequency_table_get_attr(kirkwood_freq_table, policy->cpu);
140 return 0;
143 static int kirkwood_cpufreq_cpu_exit(struct cpufreq_policy *policy)
145 cpufreq_frequency_table_put_attr(policy->cpu);
146 return 0;
149 static struct freq_attr *kirkwood_cpufreq_attr[] = {
150 &cpufreq_freq_attr_scaling_available_freqs,
151 NULL,
154 static struct cpufreq_driver kirkwood_cpufreq_driver = {
155 .get = kirkwood_cpufreq_get_cpu_frequency,
156 .verify = kirkwood_cpufreq_verify,
157 .target = kirkwood_cpufreq_target,
158 .init = kirkwood_cpufreq_cpu_init,
159 .exit = kirkwood_cpufreq_cpu_exit,
160 .name = "kirkwood-cpufreq",
161 .owner = THIS_MODULE,
162 .attr = kirkwood_cpufreq_attr,
165 static int kirkwood_cpufreq_probe(struct platform_device *pdev)
167 struct device_node *np;
168 struct resource *res;
169 int err;
171 priv.dev = &pdev->dev;
173 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
174 if (!res) {
175 dev_err(&pdev->dev, "Cannot get memory resource\n");
176 return -ENODEV;
178 priv.base = devm_request_and_ioremap(&pdev->dev, res);
179 if (!priv.base) {
180 dev_err(&pdev->dev, "Cannot ioremap\n");
181 return -EADDRNOTAVAIL;
184 np = of_find_node_by_path("/cpus/cpu@0");
185 if (!np)
186 return -ENODEV;
188 priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
189 if (IS_ERR(priv.cpu_clk)) {
190 dev_err(priv.dev, "Unable to get cpuclk");
191 return PTR_ERR(priv.cpu_clk);
194 clk_prepare_enable(priv.cpu_clk);
195 kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
197 priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
198 if (IS_ERR(priv.ddr_clk)) {
199 dev_err(priv.dev, "Unable to get ddrclk");
200 err = PTR_ERR(priv.ddr_clk);
201 goto out_cpu;
204 clk_prepare_enable(priv.ddr_clk);
205 kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
207 priv.powersave_clk = of_clk_get_by_name(np, "powersave");
208 if (IS_ERR(priv.powersave_clk)) {
209 dev_err(priv.dev, "Unable to get powersave");
210 err = PTR_ERR(priv.powersave_clk);
211 goto out_ddr;
213 clk_prepare(priv.powersave_clk);
215 of_node_put(np);
216 np = NULL;
218 err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
219 if (!err)
220 return 0;
222 dev_err(priv.dev, "Failed to register cpufreq driver");
224 clk_disable_unprepare(priv.powersave_clk);
225 out_ddr:
226 clk_disable_unprepare(priv.ddr_clk);
227 out_cpu:
228 clk_disable_unprepare(priv.cpu_clk);
229 of_node_put(np);
231 return err;
234 static int kirkwood_cpufreq_remove(struct platform_device *pdev)
236 cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
238 clk_disable_unprepare(priv.powersave_clk);
239 clk_disable_unprepare(priv.ddr_clk);
240 clk_disable_unprepare(priv.cpu_clk);
242 return 0;
245 static struct platform_driver kirkwood_cpufreq_platform_driver = {
246 .probe = kirkwood_cpufreq_probe,
247 .remove = kirkwood_cpufreq_remove,
248 .driver = {
249 .name = "kirkwood-cpufreq",
250 .owner = THIS_MODULE,
254 module_platform_driver(kirkwood_cpufreq_platform_driver);
256 MODULE_LICENSE("GPL v2");
257 MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
258 MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
259 MODULE_ALIAS("platform:kirkwood-cpufreq");