?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback
[linux/fpc-iii.git] / drivers / media / usb / em28xx / em28xx-cards.c
blob930e3e3fc94861e9b09b898354c9ee88ba01fd2d
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26 #include <linux/init.h>
27 #include <linux/module.h>
28 #include <linux/slab.h>
29 #include <linux/delay.h>
30 #include <linux/i2c.h>
31 #include <linux/usb.h>
32 #include <media/tuner.h>
33 #include <media/drv-intf/msp3400.h>
34 #include <media/i2c/saa7115.h>
35 #include <dt-bindings/media/tvp5150.h>
36 #include <media/i2c/tvaudio.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <sound/ac97_codec.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 static int usb_xfer_mode = -1;
64 module_param(usb_xfer_mode, int, 0444);
65 MODULE_PARM_DESC(usb_xfer_mode,
66 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
67
68 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
69 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
70
71 struct em28xx_hash_table {
72 unsigned long hash;
73 unsigned int model;
74 unsigned int tuner;
75 };
76
77 static void em28xx_pre_card_setup(struct em28xx *dev);
78
79 /*
80 * Reset sequences for analog/digital modes
81 */
82
83 /* Reset for the most [analog] boards */
84 static struct em28xx_reg_seq default_analog[] = {
85 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
86 { -1, -1, -1, -1},
87 };
88
89 /* Reset for the most [digital] boards */
90 static struct em28xx_reg_seq default_digital[] = {
91 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 analog */
96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
98 { 0x05, 0xff, 0x10, 10},
99 { -1, -1, -1, -1},
100 };
101
102 /* Board Hauppauge WinTV HVR 900 digital */
103 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
105 {EM2880_R04_GPO, 0x04, 0x0f, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Board Hauppauge WinTV HVR 900 (R2) digital */
111 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
113 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
114 { -1, -1, -1, -1},
115 };
116
117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
118 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
120 { -1, -1, -1, -1},
121 };
122
123 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
124
125 /* Board - EM2870 Kworld 355u
126 Analog - No input analog */
127
128 /* Board - EM2882 Kworld 315U digital */
129 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
130 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
131 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
132 {EM2880_R04_GPO, 0x04, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
135 { -1, -1, -1, -1},
136 };
137
138 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
139 {EM2880_R04_GPO, 0x08, 0xff, 10},
140 {EM2880_R04_GPO, 0x0c, 0xff, 10},
141 {EM2880_R04_GPO, 0x08, 0xff, 10},
142 {EM2880_R04_GPO, 0x0c, 0xff, 10},
143 { -1, -1, -1, -1},
144 };
145
146 static struct em28xx_reg_seq kworld_330u_analog[] = {
147 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
148 {EM2880_R04_GPO, 0x00, 0xff, 10},
149 { -1, -1, -1, -1},
150 };
151
152 static struct em28xx_reg_seq kworld_330u_digital[] = {
153 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
154 {EM2880_R04_GPO, 0x08, 0xff, 10},
155 { -1, -1, -1, -1},
156 };
157
158 /* Evga inDtube
159 GPIO0 - Enable digital power (s5h1409) - low to enable
160 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
161 GPIO4 - xc3028 reset
162 GOP3 - s5h1409 reset
163 */
164 static struct em28xx_reg_seq evga_indtube_analog[] = {
165 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
166 { -1, -1, -1, -1},
167 };
168
169 static struct em28xx_reg_seq evga_indtube_digital[] = {
170 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
171 {EM2880_R04_GPO, 0x04, 0xff, 10},
172 {EM2880_R04_GPO, 0x0c, 0xff, 1},
173 { -1, -1, -1, -1},
174 };
175
176 /*
177 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
178 * EM_GPIO_0 - currently unknown
179 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
180 * EM_GPIO_2 - currently unknown
181 * EM_GPIO_3 - currently unknown
182 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
183 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
184 * EM_GPIO_6 - currently unknown
185 * EM_GPIO_7 - currently unknown
186 */
187 static struct em28xx_reg_seq kworld_a340_digital[] = {
188 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
189 { -1, -1, -1, -1},
190 };
191
192 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
193 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
194 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
195 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
196 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
197 { -1, -1, -1, -1},
198 };
199
200 /* Pinnacle Hybrid Pro eb1a:2881 */
201 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
202 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
203 { -1, -1, -1, -1},
204 };
205
206 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
207 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
208 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
209 {EM2880_R04_GPO, 0x0c, 0xff, 1},
210 { -1, -1, -1, -1},
211 };
212
213 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
214 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
215 {EM2880_R04_GPO, 0x00, 0xff, 10},
216 { -1, -1, -1, -1},
217 };
218
219 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
220 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
221 {EM2880_R04_GPO, 0x08, 0xff, 10},
222 { -1, -1, -1, -1},
223 };
224
225 /* PCTV HD Mini (80e) GPIOs
226 0-5: not used
227 6: demod reset, active low
228 7: LED on, active high */
229 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
230 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
231 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
232 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
233 { -1, -1, -1, -1},
234 };
235
236 /* eb1a:2868 Reddo DVB-C USB TV Box
237 GPIO4 - CU1216L NIM
238 Other GPIOs seems to be don't care. */
239 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
247 { -1, -1, -1, -1},
248 };
249
250 /* Callback for the most boards */
251 static struct em28xx_reg_seq default_tuner_gpio[] = {
252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
255 { -1, -1, -1, -1},
256 };
257
258 /* Mute/unmute */
259 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
260 {EM2820_R08_GPIO_CTRL, 5, 7, 10},
261 { -1, -1, -1, -1},
262 };
263
264 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
265 {EM2820_R08_GPIO_CTRL, 4, 7, 10},
266 { -1, -1, -1, -1},
267 };
268
269 static struct em28xx_reg_seq compro_mute_gpio[] = {
270 {EM2820_R08_GPIO_CTRL, 6, 7, 10},
271 { -1, -1, -1, -1},
272 };
273
274 /* Terratec AV350 */
275 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
277 { -1, -1, -1, -1},
278 };
279
280 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
288 { -1, -1, -1, -1},
289 };
290
291 static struct em28xx_reg_seq vc211a_enable[] = {
292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
295 { -1, -1, -1, -1},
296 };
297
298 static struct em28xx_reg_seq dikom_dk300_digital[] = {
299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
300 {EM2880_R04_GPO, 0x08, 0xff, 10},
301 { -1, -1, -1, -1},
302 };
303
304 /* Reset for the most [digital] boards */
305 static struct em28xx_reg_seq leadership_digital[] = {
306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
307 { -1, -1, -1, -1},
308 };
309
310 static struct em28xx_reg_seq leadership_reset[] = {
311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
314 { -1, -1, -1, -1},
315 };
316
317 /* 2013:024f PCTV nanoStick T2 290e
318 * GPIO_6 - demod reset
319 * GPIO_7 - LED
320 */
321 static struct em28xx_reg_seq pctv_290e[] = {
322 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
323 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
324 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
325 { -1, -1, -1, -1},
326 };
327
328 #if 0
329 static struct em28xx_reg_seq terratec_h5_gpio[] = {
330 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
331 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
332 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
333 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
334 { -1, -1, -1, -1},
335 };
336
337 static struct em28xx_reg_seq terratec_h5_digital[] = {
338 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
339 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
340 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
341 { -1, -1, -1, -1},
342 };
343 #endif
344
345 /* 2013:024f PCTV DVB-S2 Stick 460e
346 * GPIO_0 - POWER_ON
347 * GPIO_1 - BOOST
348 * GPIO_2 - VUV_LNB (red LED)
349 * GPIO_3 - EXT_12V
350 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
351 * GPIO_5 - INT_LNB
352 * GPIO_6 - RESET_DEM
353 * GPIO_7 - LED (green LED)
354 */
355 static struct em28xx_reg_seq pctv_460e[] = {
356 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
357 { 0x0d, 0xff, 0xff, 50},
358 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
359 { 0x0d, 0x42, 0xff, 50},
360 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
361 { -1, -1, -1, -1},
362 };
363
364 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
365 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
366 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
367 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
369 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
370 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
371 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
373 { -1, -1, -1, -1},
374 };
375
376 /*
377 * 2013:0258 PCTV DVB-S2 Stick (461e)
378 * GPIO 0 = POWER_ON
379 * GPIO 1 = BOOST
380 * GPIO 2 = VUV_LNB (red LED)
381 * GPIO 3 = #EXT_12V
382 * GPIO 4 = INT_DEM
383 * GPIO 5 = INT_LNB
384 * GPIO 6 = #RESET_DEM
385 * GPIO 7 = P07_LED (green LED)
386 */
387 static struct em28xx_reg_seq pctv_461e[] = {
388 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
389 {0x0d, 0xff, 0xff, 0},
390 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
391 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
392 {0x0d, 0x42, 0xff, 0},
393 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
394 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
395 { -1, -1, -1, -1},
396 };
397
398 #if 0
399 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
400 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
401 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
404 { -1, -1, -1, -1},
405 };
406
407 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
408 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
409 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
410 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
411 { -1, -1, -1, -1},
412 };
413 #endif
414
415 /* 1b80:e425 MaxMedia UB425-TC
416 * 1b80:e1cc Delock 61959
417 * GPIO_6 - demod reset, 0=active
418 * GPIO_7 - LED, 0=active
419 */
420 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
421 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
422 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
423 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
424 { -1, -1, -1, -1},
425 };
426
427 /* 2304:0242 PCTV QuatroStick (510e)
428 * GPIO_2: decoder reset, 0=active
429 * GPIO_4: decoder suspend, 0=active
430 * GPIO_6: demod reset, 0=active
431 * GPIO_7: LED, 1=active
432 */
433 static struct em28xx_reg_seq pctv_510e[] = {
434 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
435 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
436 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
437 { -1, -1, -1, -1},
438 };
439
440 /* 2013:0251 PCTV QuatroStick nano (520e)
441 * GPIO_2: decoder reset, 0=active
442 * GPIO_4: decoder suspend, 0=active
443 * GPIO_6: demod reset, 0=active
444 * GPIO_7: LED, 1=active
445 */
446 static struct em28xx_reg_seq pctv_520e[] = {
447 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
448 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
449 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
450 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
451 { -1, -1, -1, -1},
452 };
453
454 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
455 * reg 0x80/0x84:
456 * GPIO_0: capturing LED, 0=on, 1=off
457 * GPIO_2: AV mute button, 0=pressed, 1=unpressed
458 * GPIO 3: illumination button, 0=pressed, 1=unpressed
459 * GPIO_6: illumination/flash LED, 0=on, 1=off
460 * reg 0x81/0x85:
461 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
462 */
463 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
464 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
465 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
466 { -1, -1, -1, -1},
467 };
468
469 static struct em28xx_reg_seq pctv_292e[] = {
470 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
471 {0x0d, 0xff, 0xff, 950},
472 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
473 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
474 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
475 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
476 {0x0d, 0x42, 0xff, 50},
477 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
478 {-1, -1, -1, -1},
479 };
480
481 static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
482 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
483 {0x0d, 0xff, 0xff, 600},
484 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
485 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
486 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
487 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
488 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
489 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
490 {0x0d, 0x42, 0xff, 1000},
491 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
492 {-1, -1, -1, -1},
493 };
494
495 /*
496 * Button definitions
497 */
498 static struct em28xx_button std_snapshot_button[] = {
499 {
500 .role = EM28XX_BUTTON_SNAPSHOT,
501 .reg_r = EM28XX_R0C_USBSUSP,
502 .reg_clearing = EM28XX_R0C_USBSUSP,
503 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
504 .inverted = 0,
505 },
506 {-1, 0, 0, 0, 0},
507 };
508
509 static struct em28xx_button speedlink_vad_laplace_buttons[] = {
510 {
511 .role = EM28XX_BUTTON_SNAPSHOT,
512 .reg_r = EM2874_R85_GPIO_P1_STATE,
513 .mask = 0x80,
514 .inverted = 1,
515 },
516 {
517 .role = EM28XX_BUTTON_ILLUMINATION,
518 .reg_r = EM2874_R84_GPIO_P0_STATE,
519 .mask = 0x08,
520 .inverted = 1,
521 },
522 {-1, 0, 0, 0, 0},
523 };
524
525 /*
526 * LED definitions
527 */
528 static struct em28xx_led speedlink_vad_laplace_leds[] = {
529 {
530 .role = EM28XX_LED_ANALOG_CAPTURING,
531 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
532 .gpio_mask = 0x01,
533 .inverted = 1,
534 },
535 {
536 .role = EM28XX_LED_ILLUMINATION,
537 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
538 .gpio_mask = 0x40,
539 .inverted = 1,
540 },
541 {-1, 0, 0, 0},
542 };
543
544 static struct em28xx_led kworld_ub435q_v3_leds[] = {
545 {
546 .role = EM28XX_LED_DIGITAL_CAPTURING,
547 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
548 .gpio_mask = 0x80,
549 .inverted = 1,
550 },
551 {-1, 0, 0, 0},
552 };
553
554 static struct em28xx_led pctv_80e_leds[] = {
555 {
556 .role = EM28XX_LED_DIGITAL_CAPTURING,
557 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
558 .gpio_mask = 0x80,
559 .inverted = 0,
560 },
561 {-1, 0, 0, 0},
562 };
563
564 static struct em28xx_led terratec_grabby_leds[] = {
565 {
566 .role = EM28XX_LED_ANALOG_CAPTURING,
567 .gpio_reg = EM2820_R08_GPIO_CTRL,
568 .gpio_mask = EM_GPIO_3,
569 .inverted = 1,
570 },
571 {-1, 0, 0, 0},
572 };
573
574 /*
575 * Board definitions
576 */
577 struct em28xx_board em28xx_boards[] = {
578 [EM2750_BOARD_UNKNOWN] = {
579 .name = "EM2710/EM2750/EM2751 webcam grabber",
580 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
581 .tuner_type = TUNER_ABSENT,
582 .is_webcam = 1,
583 .input = { {
584 .type = EM28XX_VMUX_COMPOSITE,
585 .vmux = 0,
586 .amux = EM28XX_AMUX_VIDEO,
587 .gpio = silvercrest_reg_seq,
588 } },
589 },
590 [EM2800_BOARD_UNKNOWN] = {
591 .name = "Unknown EM2800 video grabber",
592 .is_em2800 = 1,
593 .tda9887_conf = TDA9887_PRESENT,
594 .decoder = EM28XX_SAA711X,
595 .tuner_type = TUNER_ABSENT,
596 .input = { {
597 .type = EM28XX_VMUX_COMPOSITE,
598 .vmux = SAA7115_COMPOSITE0,
599 .amux = EM28XX_AMUX_LINE_IN,
600 }, {
601 .type = EM28XX_VMUX_SVIDEO,
602 .vmux = SAA7115_SVIDEO3,
603 .amux = EM28XX_AMUX_LINE_IN,
604 } },
605 },
606 [EM2820_BOARD_UNKNOWN] = {
607 .name = "Unknown EM2750/28xx video grabber",
608 .tuner_type = TUNER_ABSENT,
609 .is_webcam = 1, /* To enable sensor probe */
610 },
611 [EM2750_BOARD_DLCW_130] = {
612 /* Beijing Huaqi Information Digital Technology Co., Ltd */
613 .name = "Huaqi DLCW-130",
614 .valid = EM28XX_BOARD_NOT_VALIDATED,
615 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
616 .tuner_type = TUNER_ABSENT,
617 .is_webcam = 1,
618 .input = { {
619 .type = EM28XX_VMUX_COMPOSITE,
620 .vmux = 0,
621 .amux = EM28XX_AMUX_VIDEO,
622 } },
623 },
624 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
625 .name = "Kworld PVR TV 2800 RF",
626 .tuner_type = TUNER_TEMIC_PAL,
627 .tda9887_conf = TDA9887_PRESENT,
628 .decoder = EM28XX_SAA711X,
629 .input = { {
630 .type = EM28XX_VMUX_COMPOSITE,
631 .vmux = SAA7115_COMPOSITE0,
632 .amux = EM28XX_AMUX_LINE_IN,
633 }, {
634 .type = EM28XX_VMUX_SVIDEO,
635 .vmux = SAA7115_SVIDEO3,
636 .amux = EM28XX_AMUX_LINE_IN,
637 } },
638 },
639 [EM2820_BOARD_GADMEI_TVR200] = {
640 .name = "Gadmei TVR200",
641 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
642 .tda9887_conf = TDA9887_PRESENT,
643 .decoder = EM28XX_SAA711X,
644 .input = { {
645 .type = EM28XX_VMUX_TELEVISION,
646 .vmux = SAA7115_COMPOSITE2,
647 .amux = EM28XX_AMUX_LINE_IN,
648 }, {
649 .type = EM28XX_VMUX_COMPOSITE,
650 .vmux = SAA7115_COMPOSITE0,
651 .amux = EM28XX_AMUX_LINE_IN,
652 }, {
653 .type = EM28XX_VMUX_SVIDEO,
654 .vmux = SAA7115_SVIDEO3,
655 .amux = EM28XX_AMUX_LINE_IN,
656 } },
657 },
658 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
659 .name = "Terratec Cinergy 250 USB",
660 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
661 .has_ir_i2c = 1,
662 .tda9887_conf = TDA9887_PRESENT,
663 .decoder = EM28XX_SAA711X,
664 .input = { {
665 .type = EM28XX_VMUX_TELEVISION,
666 .vmux = SAA7115_COMPOSITE2,
667 .amux = EM28XX_AMUX_VIDEO,
668 }, {
669 .type = EM28XX_VMUX_COMPOSITE,
670 .vmux = SAA7115_COMPOSITE0,
671 .amux = EM28XX_AMUX_LINE_IN,
672 }, {
673 .type = EM28XX_VMUX_SVIDEO,
674 .vmux = SAA7115_SVIDEO3,
675 .amux = EM28XX_AMUX_LINE_IN,
676 } },
677 },
678 [EM2820_BOARD_PINNACLE_USB_2] = {
679 .name = "Pinnacle PCTV USB 2",
680 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
681 .has_ir_i2c = 1,
682 .tda9887_conf = TDA9887_PRESENT,
683 .decoder = EM28XX_SAA711X,
684 .input = { {
685 .type = EM28XX_VMUX_TELEVISION,
686 .vmux = SAA7115_COMPOSITE2,
687 .amux = EM28XX_AMUX_VIDEO,
688 }, {
689 .type = EM28XX_VMUX_COMPOSITE,
690 .vmux = SAA7115_COMPOSITE0,
691 .amux = EM28XX_AMUX_LINE_IN,
692 }, {
693 .type = EM28XX_VMUX_SVIDEO,
694 .vmux = SAA7115_SVIDEO3,
695 .amux = EM28XX_AMUX_LINE_IN,
696 } },
697 },
698 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
699 .name = "Hauppauge WinTV USB 2",
700 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
701 .tda9887_conf = TDA9887_PRESENT |
702 TDA9887_PORT1_ACTIVE |
703 TDA9887_PORT2_ACTIVE,
704 .decoder = EM28XX_TVP5150,
705 .has_msp34xx = 1,
706 .has_ir_i2c = 1,
707 .input = { {
708 .type = EM28XX_VMUX_TELEVISION,
709 .vmux = TVP5150_COMPOSITE0,
710 .amux = MSP_INPUT_DEFAULT,
711 }, {
712 .type = EM28XX_VMUX_SVIDEO,
713 .vmux = TVP5150_SVIDEO,
714 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
715 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
716 } },
717 },
718 [EM2820_BOARD_DLINK_USB_TV] = {
719 .name = "D-Link DUB-T210 TV Tuner",
720 .valid = EM28XX_BOARD_NOT_VALIDATED,
721 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
722 .tda9887_conf = TDA9887_PRESENT,
723 .decoder = EM28XX_SAA711X,
724 .input = { {
725 .type = EM28XX_VMUX_TELEVISION,
726 .vmux = SAA7115_COMPOSITE2,
727 .amux = EM28XX_AMUX_LINE_IN,
728 }, {
729 .type = EM28XX_VMUX_COMPOSITE,
730 .vmux = SAA7115_COMPOSITE0,
731 .amux = EM28XX_AMUX_LINE_IN,
732 }, {
733 .type = EM28XX_VMUX_SVIDEO,
734 .vmux = SAA7115_SVIDEO3,
735 .amux = EM28XX_AMUX_LINE_IN,
736 } },
737 },
738 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
739 .name = "Hercules Smart TV USB 2.0",
740 .valid = EM28XX_BOARD_NOT_VALIDATED,
741 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
742 .tda9887_conf = TDA9887_PRESENT,
743 .decoder = EM28XX_SAA711X,
744 .input = { {
745 .type = EM28XX_VMUX_TELEVISION,
746 .vmux = SAA7115_COMPOSITE2,
747 .amux = EM28XX_AMUX_LINE_IN,
748 }, {
749 .type = EM28XX_VMUX_COMPOSITE,
750 .vmux = SAA7115_COMPOSITE0,
751 .amux = EM28XX_AMUX_LINE_IN,
752 }, {
753 .type = EM28XX_VMUX_SVIDEO,
754 .vmux = SAA7115_SVIDEO3,
755 .amux = EM28XX_AMUX_LINE_IN,
756 } },
757 },
758 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
759 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
760 .valid = EM28XX_BOARD_NOT_VALIDATED,
761 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
762 .tda9887_conf = TDA9887_PRESENT,
763 .decoder = EM28XX_SAA711X,
764 .input = { {
765 .type = EM28XX_VMUX_TELEVISION,
766 .vmux = SAA7115_COMPOSITE2,
767 .amux = EM28XX_AMUX_VIDEO,
768 }, {
769 .type = EM28XX_VMUX_COMPOSITE,
770 .vmux = SAA7115_COMPOSITE0,
771 .amux = EM28XX_AMUX_LINE_IN,
772 }, {
773 .type = EM28XX_VMUX_SVIDEO,
774 .vmux = SAA7115_SVIDEO3,
775 .amux = EM28XX_AMUX_LINE_IN,
776 } },
777 },
778 [EM2820_BOARD_GADMEI_UTV310] = {
779 .name = "Gadmei UTV310",
780 .valid = EM28XX_BOARD_NOT_VALIDATED,
781 .tuner_type = TUNER_TNF_5335MF,
782 .tda9887_conf = TDA9887_PRESENT,
783 .decoder = EM28XX_SAA711X,
784 .input = { {
785 .type = EM28XX_VMUX_TELEVISION,
786 .vmux = SAA7115_COMPOSITE1,
787 .amux = EM28XX_AMUX_LINE_IN,
788 }, {
789 .type = EM28XX_VMUX_COMPOSITE,
790 .vmux = SAA7115_COMPOSITE0,
791 .amux = EM28XX_AMUX_LINE_IN,
792 }, {
793 .type = EM28XX_VMUX_SVIDEO,
794 .vmux = SAA7115_SVIDEO3,
795 .amux = EM28XX_AMUX_LINE_IN,
796 } },
797 },
798 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
799 .name = "Leadtek Winfast USB II Deluxe",
800 .valid = EM28XX_BOARD_NOT_VALIDATED,
801 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
802 .has_ir_i2c = 1,
803 .tvaudio_addr = 0x58,
804 .tda9887_conf = TDA9887_PRESENT |
805 TDA9887_PORT2_ACTIVE |
806 TDA9887_QSS,
807 .decoder = EM28XX_SAA711X,
808 .adecoder = EM28XX_TVAUDIO,
809 .input = { {
810 .type = EM28XX_VMUX_TELEVISION,
811 .vmux = SAA7115_COMPOSITE4,
812 .amux = EM28XX_AMUX_AUX,
813 }, {
814 .type = EM28XX_VMUX_COMPOSITE,
815 .vmux = SAA7115_COMPOSITE5,
816 .amux = EM28XX_AMUX_LINE_IN,
817 }, {
818 .type = EM28XX_VMUX_SVIDEO,
819 .vmux = SAA7115_SVIDEO3,
820 .amux = EM28XX_AMUX_LINE_IN,
821 } },
822 .radio = {
823 .type = EM28XX_RADIO,
824 .amux = EM28XX_AMUX_AUX,
825 }
826 },
827 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
828 .name = "Videology 20K14XUSB USB2.0",
829 .valid = EM28XX_BOARD_NOT_VALIDATED,
830 .tuner_type = TUNER_ABSENT,
831 .is_webcam = 1,
832 .input = { {
833 .type = EM28XX_VMUX_COMPOSITE,
834 .vmux = 0,
835 .amux = EM28XX_AMUX_VIDEO,
836 } },
837 },
838 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
839 .name = "Silvercrest Webcam 1.3mpix",
840 .tuner_type = TUNER_ABSENT,
841 .is_webcam = 1,
842 .input = { {
843 .type = EM28XX_VMUX_COMPOSITE,
844 .vmux = 0,
845 .amux = EM28XX_AMUX_VIDEO,
846 .gpio = silvercrest_reg_seq,
847 } },
848 },
849 [EM2821_BOARD_SUPERCOMP_USB_2] = {
850 .name = "Supercomp USB 2.0 TV",
851 .valid = EM28XX_BOARD_NOT_VALIDATED,
852 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
853 .tda9887_conf = TDA9887_PRESENT |
854 TDA9887_PORT1_ACTIVE |
855 TDA9887_PORT2_ACTIVE,
856 .decoder = EM28XX_SAA711X,
857 .input = { {
858 .type = EM28XX_VMUX_TELEVISION,
859 .vmux = SAA7115_COMPOSITE2,
860 .amux = EM28XX_AMUX_LINE_IN,
861 }, {
862 .type = EM28XX_VMUX_COMPOSITE,
863 .vmux = SAA7115_COMPOSITE0,
864 .amux = EM28XX_AMUX_VIDEO,
865 }, {
866 .type = EM28XX_VMUX_SVIDEO,
867 .vmux = SAA7115_SVIDEO3,
868 .amux = EM28XX_AMUX_LINE_IN,
869 } },
870 },
871 [EM2821_BOARD_USBGEAR_VD204] = {
872 .name = "Usbgear VD204v9",
873 .valid = EM28XX_BOARD_NOT_VALIDATED,
874 .tuner_type = TUNER_ABSENT, /* Capture only device */
875 .decoder = EM28XX_SAA711X,
876 .input = { {
877 .type = EM28XX_VMUX_COMPOSITE,
878 .vmux = SAA7115_COMPOSITE0,
879 .amux = EM28XX_AMUX_LINE_IN,
880 }, {
881 .type = EM28XX_VMUX_SVIDEO,
882 .vmux = SAA7115_SVIDEO3,
883 .amux = EM28XX_AMUX_LINE_IN,
884 } },
885 },
886 [EM2860_BOARD_NETGMBH_CAM] = {
887 /* Beijing Huaqi Information Digital Technology Co., Ltd */
888 .name = "NetGMBH Cam",
889 .valid = EM28XX_BOARD_NOT_VALIDATED,
890 .tuner_type = TUNER_ABSENT,
891 .is_webcam = 1,
892 .input = { {
893 .type = EM28XX_VMUX_COMPOSITE,
894 .vmux = 0,
895 .amux = EM28XX_AMUX_VIDEO,
896 } },
897 },
898 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
899 .name = "Typhoon DVD Maker",
900 .decoder = EM28XX_SAA711X,
901 .tuner_type = TUNER_ABSENT, /* Capture only device */
902 .input = { {
903 .type = EM28XX_VMUX_COMPOSITE,
904 .vmux = SAA7115_COMPOSITE0,
905 .amux = EM28XX_AMUX_LINE_IN,
906 }, {
907 .type = EM28XX_VMUX_SVIDEO,
908 .vmux = SAA7115_SVIDEO3,
909 .amux = EM28XX_AMUX_LINE_IN,
910 } },
911 },
912 [EM2860_BOARD_GADMEI_UTV330] = {
913 .name = "Gadmei UTV330",
914 .valid = EM28XX_BOARD_NOT_VALIDATED,
915 .tuner_type = TUNER_TNF_5335MF,
916 .tda9887_conf = TDA9887_PRESENT,
917 .decoder = EM28XX_SAA711X,
918 .input = { {
919 .type = EM28XX_VMUX_TELEVISION,
920 .vmux = SAA7115_COMPOSITE2,
921 .amux = EM28XX_AMUX_VIDEO,
922 }, {
923 .type = EM28XX_VMUX_COMPOSITE,
924 .vmux = SAA7115_COMPOSITE0,
925 .amux = EM28XX_AMUX_LINE_IN,
926 }, {
927 .type = EM28XX_VMUX_SVIDEO,
928 .vmux = SAA7115_SVIDEO3,
929 .amux = EM28XX_AMUX_LINE_IN,
930 } },
931 },
932 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
933 .name = "Gadmei UTV330+",
934 .tuner_type = TUNER_TNF_5335MF,
935 .tda9887_conf = TDA9887_PRESENT,
936 .ir_codes = RC_MAP_GADMEI_RM008Z,
937 .decoder = EM28XX_SAA711X,
938 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
939 .input = { {
940 .type = EM28XX_VMUX_TELEVISION,
941 .vmux = SAA7115_COMPOSITE2,
942 .amux = EM28XX_AMUX_VIDEO,
943 }, {
944 .type = EM28XX_VMUX_COMPOSITE,
945 .vmux = SAA7115_COMPOSITE0,
946 .amux = EM28XX_AMUX_LINE_IN,
947 }, {
948 .type = EM28XX_VMUX_SVIDEO,
949 .vmux = SAA7115_SVIDEO3,
950 .amux = EM28XX_AMUX_LINE_IN,
951 } },
952 },
953 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
954 .name = "Terratec Cinergy A Hybrid XS",
955 .valid = EM28XX_BOARD_NOT_VALIDATED,
956 .tuner_type = TUNER_XC2028,
957 .tuner_gpio = default_tuner_gpio,
958 .decoder = EM28XX_TVP5150,
959
960 .input = { {
961 .type = EM28XX_VMUX_TELEVISION,
962 .vmux = TVP5150_COMPOSITE0,
963 .amux = EM28XX_AMUX_VIDEO,
964 .gpio = hauppauge_wintv_hvr_900_analog,
965 }, {
966 .type = EM28XX_VMUX_COMPOSITE,
967 .vmux = TVP5150_COMPOSITE1,
968 .amux = EM28XX_AMUX_LINE_IN,
969 .gpio = hauppauge_wintv_hvr_900_analog,
970 }, {
971 .type = EM28XX_VMUX_SVIDEO,
972 .vmux = TVP5150_SVIDEO,
973 .amux = EM28XX_AMUX_LINE_IN,
974 .gpio = hauppauge_wintv_hvr_900_analog,
975 } },
976 },
977 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
978 .name = "KWorld PVRTV 300U",
979 .valid = EM28XX_BOARD_NOT_VALIDATED,
980 .tuner_type = TUNER_XC2028,
981 .tuner_gpio = default_tuner_gpio,
982 .decoder = EM28XX_TVP5150,
983 .input = { {
984 .type = EM28XX_VMUX_TELEVISION,
985 .vmux = TVP5150_COMPOSITE0,
986 .amux = EM28XX_AMUX_VIDEO,
987 }, {
988 .type = EM28XX_VMUX_COMPOSITE,
989 .vmux = TVP5150_COMPOSITE1,
990 .amux = EM28XX_AMUX_LINE_IN,
991 }, {
992 .type = EM28XX_VMUX_SVIDEO,
993 .vmux = TVP5150_SVIDEO,
994 .amux = EM28XX_AMUX_LINE_IN,
995 } },
996 },
997 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
998 .name = "Yakumo MovieMixer",
999 .tuner_type = TUNER_ABSENT, /* Capture only device */
1000 .decoder = EM28XX_TVP5150,
1001 .input = { {
1002 .type = EM28XX_VMUX_TELEVISION,
1003 .vmux = TVP5150_COMPOSITE0,
1004 .amux = EM28XX_AMUX_VIDEO,
1005 }, {
1006 .type = EM28XX_VMUX_COMPOSITE,
1007 .vmux = TVP5150_COMPOSITE1,
1008 .amux = EM28XX_AMUX_LINE_IN,
1009 }, {
1010 .type = EM28XX_VMUX_SVIDEO,
1011 .vmux = TVP5150_SVIDEO,
1012 .amux = EM28XX_AMUX_LINE_IN,
1013 } },
1014 },
1015 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
1016 .name = "EM2860/TVP5150 Reference Design",
1017 .tuner_type = TUNER_ABSENT, /* Capture only device */
1018 .decoder = EM28XX_TVP5150,
1019 .input = { {
1020 .type = EM28XX_VMUX_COMPOSITE,
1021 .vmux = TVP5150_COMPOSITE1,
1022 .amux = EM28XX_AMUX_LINE_IN,
1023 }, {
1024 .type = EM28XX_VMUX_SVIDEO,
1025 .vmux = TVP5150_SVIDEO,
1026 .amux = EM28XX_AMUX_LINE_IN,
1027 } },
1028 },
1029 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
1030 .name = "Plextor ConvertX PX-TV100U",
1031 .tuner_type = TUNER_TNF_5335MF,
1032 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
1033 EM28XX_XCLK_FREQUENCY_12MHZ,
1034 .tda9887_conf = TDA9887_PRESENT,
1035 .decoder = EM28XX_TVP5150,
1036 .has_msp34xx = 1,
1037 .input = { {
1038 .type = EM28XX_VMUX_TELEVISION,
1039 .vmux = TVP5150_COMPOSITE0,
1040 .amux = EM28XX_AMUX_LINE_IN,
1041 .gpio = pinnacle_hybrid_pro_analog,
1042 }, {
1043 .type = EM28XX_VMUX_COMPOSITE,
1044 .vmux = TVP5150_COMPOSITE1,
1045 .amux = EM28XX_AMUX_LINE_IN,
1046 .gpio = pinnacle_hybrid_pro_analog,
1047 }, {
1048 .type = EM28XX_VMUX_SVIDEO,
1049 .vmux = TVP5150_SVIDEO,
1050 .amux = EM28XX_AMUX_LINE_IN,
1051 .gpio = pinnacle_hybrid_pro_analog,
1052 } },
1053 },
1054
1055 /* Those boards with em2870 are DVB Only*/
1056
1057 [EM2870_BOARD_TERRATEC_XS] = {
1058 .name = "Terratec Cinergy T XS",
1059 .valid = EM28XX_BOARD_NOT_VALIDATED,
1060 .tuner_type = TUNER_XC2028,
1061 .tuner_gpio = default_tuner_gpio,
1062 },
1063 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
1064 .name = "Terratec Cinergy T XS (MT2060)",
1065 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1066 EM28XX_XCLK_FREQUENCY_12MHZ,
1067 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1068 .tuner_type = TUNER_ABSENT, /* MT2060 */
1069 .has_dvb = 1,
1070 .tuner_gpio = default_tuner_gpio,
1071 },
1072 [EM2870_BOARD_KWORLD_350U] = {
1073 .name = "Kworld 350 U DVB-T",
1074 .valid = EM28XX_BOARD_NOT_VALIDATED,
1075 .tuner_type = TUNER_XC2028,
1076 .tuner_gpio = default_tuner_gpio,
1077 },
1078 [EM2870_BOARD_KWORLD_355U] = {
1079 .name = "Kworld 355 U DVB-T",
1080 .valid = EM28XX_BOARD_NOT_VALIDATED,
1081 .tuner_type = TUNER_ABSENT,
1082 .tuner_gpio = default_tuner_gpio,
1083 .has_dvb = 1,
1084 .dvb_gpio = default_digital,
1085 },
1086 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
1087 .name = "Pinnacle PCTV DVB-T",
1088 .valid = EM28XX_BOARD_NOT_VALIDATED,
1089 .tuner_type = TUNER_ABSENT, /* MT2060 */
1090 /* djh - I have serious doubts this is right... */
1091 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1092 EM28XX_XCLK_FREQUENCY_10MHZ,
1093 },
1094 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
1095 .name = "Compro, VideoMate U3",
1096 .valid = EM28XX_BOARD_NOT_VALIDATED,
1097 .tuner_type = TUNER_ABSENT, /* MT2060 */
1098 },
1099
1100 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
1101 .name = "Terratec Hybrid XS Secam",
1102 .has_msp34xx = 1,
1103 .tuner_type = TUNER_XC2028,
1104 .tuner_gpio = default_tuner_gpio,
1105 .decoder = EM28XX_TVP5150,
1106 .has_dvb = 1,
1107 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
1108 .input = { {
1109 .type = EM28XX_VMUX_TELEVISION,
1110 .vmux = TVP5150_COMPOSITE0,
1111 .amux = EM28XX_AMUX_VIDEO,
1112 .gpio = terratec_cinergy_USB_XS_FR_analog,
1113 }, {
1114 .type = EM28XX_VMUX_COMPOSITE,
1115 .vmux = TVP5150_COMPOSITE1,
1116 .amux = EM28XX_AMUX_LINE_IN,
1117 .gpio = terratec_cinergy_USB_XS_FR_analog,
1118 }, {
1119 .type = EM28XX_VMUX_SVIDEO,
1120 .vmux = TVP5150_SVIDEO,
1121 .amux = EM28XX_AMUX_LINE_IN,
1122 .gpio = terratec_cinergy_USB_XS_FR_analog,
1123 } },
1124 },
1125 [EM2884_BOARD_TERRATEC_H5] = {
1126 .name = "Terratec Cinergy H5",
1127 .has_dvb = 1,
1128 #if 0
1129 .tuner_type = TUNER_PHILIPS_TDA8290,
1130 .tuner_addr = 0x41,
1131 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1132 .tuner_gpio = terratec_h5_gpio,
1133 #else
1134 .tuner_type = TUNER_ABSENT,
1135 #endif
1136 .def_i2c_bus = 1,
1137 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1138 EM28XX_I2C_FREQ_400_KHZ,
1139 },
1140 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
1141 .name = "Hauppauge WinTV HVR 930C",
1142 .has_dvb = 1,
1143 #if 0 /* FIXME: Add analog support */
1144 .tuner_type = TUNER_XC5000,
1145 .tuner_addr = 0x41,
1146 .dvb_gpio = hauppauge_930c_digital,
1147 .tuner_gpio = hauppauge_930c_gpio,
1148 #else
1149 .tuner_type = TUNER_ABSENT,
1150 #endif
1151 .ir_codes = RC_MAP_HAUPPAUGE,
1152 .def_i2c_bus = 1,
1153 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1154 EM28XX_I2C_FREQ_400_KHZ,
1155 },
1156 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
1157 .name = "C3 Tech Digital Duo HDTV/SDTV USB",
1158 .has_dvb = 1,
1159 /* FIXME: Add analog support - need a saa7136 driver */
1160 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1161 .ir_codes = RC_MAP_EMPTY,
1162 .def_i2c_bus = 1,
1163 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1164 .dvb_gpio = c3tech_digital_duo_digital,
1165 },
1166 [EM2884_BOARD_CINERGY_HTC_STICK] = {
1167 .name = "Terratec Cinergy HTC Stick",
1168 .has_dvb = 1,
1169 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1170 .tuner_type = TUNER_ABSENT,
1171 .def_i2c_bus = 1,
1172 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1173 EM28XX_I2C_FREQ_400_KHZ,
1174 },
1175 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
1176 .name = "Elgato EyeTV Hybrid 2008 INT",
1177 .has_dvb = 1,
1178 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1179 .tuner_type = TUNER_ABSENT,
1180 .def_i2c_bus = 1,
1181 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1182 EM28XX_I2C_FREQ_400_KHZ,
1183 },
1184 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
1185 .name = "Hauppauge WinTV HVR 900",
1186 .tda9887_conf = TDA9887_PRESENT,
1187 .tuner_type = TUNER_XC2028,
1188 .tuner_gpio = default_tuner_gpio,
1189 .mts_firmware = 1,
1190 .has_dvb = 1,
1191 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1192 .ir_codes = RC_MAP_HAUPPAUGE,
1193 .decoder = EM28XX_TVP5150,
1194 .input = { {
1195 .type = EM28XX_VMUX_TELEVISION,
1196 .vmux = TVP5150_COMPOSITE0,
1197 .amux = EM28XX_AMUX_VIDEO,
1198 .gpio = hauppauge_wintv_hvr_900_analog,
1199 }, {
1200 .type = EM28XX_VMUX_COMPOSITE,
1201 .vmux = TVP5150_COMPOSITE1,
1202 .amux = EM28XX_AMUX_LINE_IN,
1203 .gpio = hauppauge_wintv_hvr_900_analog,
1204 }, {
1205 .type = EM28XX_VMUX_SVIDEO,
1206 .vmux = TVP5150_SVIDEO,
1207 .amux = EM28XX_AMUX_LINE_IN,
1208 .gpio = hauppauge_wintv_hvr_900_analog,
1209 } },
1210 },
1211 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1212 .name = "Hauppauge WinTV HVR 900 (R2)",
1213 .tda9887_conf = TDA9887_PRESENT,
1214 .tuner_type = TUNER_XC2028,
1215 .tuner_gpio = default_tuner_gpio,
1216 .mts_firmware = 1,
1217 .has_dvb = 1,
1218 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1219 .ir_codes = RC_MAP_HAUPPAUGE,
1220 .decoder = EM28XX_TVP5150,
1221 .input = { {
1222 .type = EM28XX_VMUX_TELEVISION,
1223 .vmux = TVP5150_COMPOSITE0,
1224 .amux = EM28XX_AMUX_VIDEO,
1225 .gpio = hauppauge_wintv_hvr_900_analog,
1226 }, {
1227 .type = EM28XX_VMUX_COMPOSITE,
1228 .vmux = TVP5150_COMPOSITE1,
1229 .amux = EM28XX_AMUX_LINE_IN,
1230 .gpio = hauppauge_wintv_hvr_900_analog,
1231 }, {
1232 .type = EM28XX_VMUX_SVIDEO,
1233 .vmux = TVP5150_SVIDEO,
1234 .amux = EM28XX_AMUX_LINE_IN,
1235 .gpio = hauppauge_wintv_hvr_900_analog,
1236 } },
1237 },
1238 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1239 .name = "Hauppauge WinTV HVR 850",
1240 .tuner_type = TUNER_XC2028,
1241 .tuner_gpio = default_tuner_gpio,
1242 .mts_firmware = 1,
1243 .has_dvb = 1,
1244 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1245 .ir_codes = RC_MAP_HAUPPAUGE,
1246 .decoder = EM28XX_TVP5150,
1247 .input = { {
1248 .type = EM28XX_VMUX_TELEVISION,
1249 .vmux = TVP5150_COMPOSITE0,
1250 .amux = EM28XX_AMUX_VIDEO,
1251 .gpio = hauppauge_wintv_hvr_900_analog,
1252 }, {
1253 .type = EM28XX_VMUX_COMPOSITE,
1254 .vmux = TVP5150_COMPOSITE1,
1255 .amux = EM28XX_AMUX_LINE_IN,
1256 .gpio = hauppauge_wintv_hvr_900_analog,
1257 }, {
1258 .type = EM28XX_VMUX_SVIDEO,
1259 .vmux = TVP5150_SVIDEO,
1260 .amux = EM28XX_AMUX_LINE_IN,
1261 .gpio = hauppauge_wintv_hvr_900_analog,
1262 } },
1263 },
1264 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1265 .name = "Hauppauge WinTV HVR 950",
1266 .tuner_type = TUNER_XC2028,
1267 .tuner_gpio = default_tuner_gpio,
1268 .mts_firmware = 1,
1269 .has_dvb = 1,
1270 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1271 .ir_codes = RC_MAP_HAUPPAUGE,
1272 .decoder = EM28XX_TVP5150,
1273 .input = { {
1274 .type = EM28XX_VMUX_TELEVISION,
1275 .vmux = TVP5150_COMPOSITE0,
1276 .amux = EM28XX_AMUX_VIDEO,
1277 .gpio = hauppauge_wintv_hvr_900_analog,
1278 }, {
1279 .type = EM28XX_VMUX_COMPOSITE,
1280 .vmux = TVP5150_COMPOSITE1,
1281 .amux = EM28XX_AMUX_LINE_IN,
1282 .gpio = hauppauge_wintv_hvr_900_analog,
1283 }, {
1284 .type = EM28XX_VMUX_SVIDEO,
1285 .vmux = TVP5150_SVIDEO,
1286 .amux = EM28XX_AMUX_LINE_IN,
1287 .gpio = hauppauge_wintv_hvr_900_analog,
1288 } },
1289 },
1290 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1291 .name = "Pinnacle PCTV HD Pro Stick",
1292 .tuner_type = TUNER_XC2028,
1293 .tuner_gpio = default_tuner_gpio,
1294 .mts_firmware = 1,
1295 .has_dvb = 1,
1296 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1297 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1298 .decoder = EM28XX_TVP5150,
1299 .input = { {
1300 .type = EM28XX_VMUX_TELEVISION,
1301 .vmux = TVP5150_COMPOSITE0,
1302 .amux = EM28XX_AMUX_VIDEO,
1303 .gpio = hauppauge_wintv_hvr_900_analog,
1304 }, {
1305 .type = EM28XX_VMUX_COMPOSITE,
1306 .vmux = TVP5150_COMPOSITE1,
1307 .amux = EM28XX_AMUX_LINE_IN,
1308 .gpio = hauppauge_wintv_hvr_900_analog,
1309 }, {
1310 .type = EM28XX_VMUX_SVIDEO,
1311 .vmux = TVP5150_SVIDEO,
1312 .amux = EM28XX_AMUX_LINE_IN,
1313 .gpio = hauppauge_wintv_hvr_900_analog,
1314 } },
1315 },
1316 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1317 .name = "AMD ATI TV Wonder HD 600",
1318 .tuner_type = TUNER_XC2028,
1319 .tuner_gpio = default_tuner_gpio,
1320 .mts_firmware = 1,
1321 .has_dvb = 1,
1322 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1323 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1324 .decoder = EM28XX_TVP5150,
1325 .input = { {
1326 .type = EM28XX_VMUX_TELEVISION,
1327 .vmux = TVP5150_COMPOSITE0,
1328 .amux = EM28XX_AMUX_VIDEO,
1329 .gpio = hauppauge_wintv_hvr_900_analog,
1330 }, {
1331 .type = EM28XX_VMUX_COMPOSITE,
1332 .vmux = TVP5150_COMPOSITE1,
1333 .amux = EM28XX_AMUX_LINE_IN,
1334 .gpio = hauppauge_wintv_hvr_900_analog,
1335 }, {
1336 .type = EM28XX_VMUX_SVIDEO,
1337 .vmux = TVP5150_SVIDEO,
1338 .amux = EM28XX_AMUX_LINE_IN,
1339 .gpio = hauppauge_wintv_hvr_900_analog,
1340 } },
1341 },
1342 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1343 .name = "Terratec Hybrid XS",
1344 .tuner_type = TUNER_XC2028,
1345 .tuner_gpio = default_tuner_gpio,
1346 .decoder = EM28XX_TVP5150,
1347 .has_dvb = 1,
1348 .dvb_gpio = default_digital,
1349 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1350 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1351 .input = { {
1352 .type = EM28XX_VMUX_TELEVISION,
1353 .vmux = TVP5150_COMPOSITE0,
1354 .amux = EM28XX_AMUX_VIDEO,
1355 .gpio = default_analog,
1356 }, {
1357 .type = EM28XX_VMUX_COMPOSITE,
1358 .vmux = TVP5150_COMPOSITE1,
1359 .amux = EM28XX_AMUX_LINE_IN,
1360 .gpio = default_analog,
1361 }, {
1362 .type = EM28XX_VMUX_SVIDEO,
1363 .vmux = TVP5150_SVIDEO,
1364 .amux = EM28XX_AMUX_LINE_IN,
1365 .gpio = default_analog,
1366 } },
1367 },
1368 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1369 as Prodigy XS with a different PID, let's keep it separated for now
1370 maybe we'll need it lateron */
1371 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1372 .name = "Terratec Prodigy XS",
1373 .tuner_type = TUNER_XC2028,
1374 .tuner_gpio = default_tuner_gpio,
1375 .decoder = EM28XX_TVP5150,
1376 .input = { {
1377 .type = EM28XX_VMUX_TELEVISION,
1378 .vmux = TVP5150_COMPOSITE0,
1379 .amux = EM28XX_AMUX_VIDEO,
1380 .gpio = hauppauge_wintv_hvr_900_analog,
1381 }, {
1382 .type = EM28XX_VMUX_COMPOSITE,
1383 .vmux = TVP5150_COMPOSITE1,
1384 .amux = EM28XX_AMUX_LINE_IN,
1385 .gpio = hauppauge_wintv_hvr_900_analog,
1386 }, {
1387 .type = EM28XX_VMUX_SVIDEO,
1388 .vmux = TVP5150_SVIDEO,
1389 .amux = EM28XX_AMUX_LINE_IN,
1390 .gpio = hauppauge_wintv_hvr_900_analog,
1391 } },
1392 },
1393 [EM2820_BOARD_MSI_VOX_USB_2] = {
1394 .name = "MSI VOX USB 2.0",
1395 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1396 .tda9887_conf = TDA9887_PRESENT |
1397 TDA9887_PORT1_ACTIVE |
1398 TDA9887_PORT2_ACTIVE,
1399 .max_range_640_480 = 1,
1400 .decoder = EM28XX_SAA711X,
1401 .input = { {
1402 .type = EM28XX_VMUX_TELEVISION,
1403 .vmux = SAA7115_COMPOSITE4,
1404 .amux = EM28XX_AMUX_VIDEO,
1405 }, {
1406 .type = EM28XX_VMUX_COMPOSITE,
1407 .vmux = SAA7115_COMPOSITE0,
1408 .amux = EM28XX_AMUX_LINE_IN,
1409 }, {
1410 .type = EM28XX_VMUX_SVIDEO,
1411 .vmux = SAA7115_SVIDEO3,
1412 .amux = EM28XX_AMUX_LINE_IN,
1413 } },
1414 },
1415 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1416 .name = "Terratec Cinergy 200 USB",
1417 .is_em2800 = 1,
1418 .has_ir_i2c = 1,
1419 .tuner_type = TUNER_LG_TALN,
1420 .tda9887_conf = TDA9887_PRESENT,
1421 .decoder = EM28XX_SAA711X,
1422 .input = { {
1423 .type = EM28XX_VMUX_TELEVISION,
1424 .vmux = SAA7115_COMPOSITE2,
1425 .amux = EM28XX_AMUX_VIDEO,
1426 }, {
1427 .type = EM28XX_VMUX_COMPOSITE,
1428 .vmux = SAA7115_COMPOSITE0,
1429 .amux = EM28XX_AMUX_LINE_IN,
1430 }, {
1431 .type = EM28XX_VMUX_SVIDEO,
1432 .vmux = SAA7115_SVIDEO3,
1433 .amux = EM28XX_AMUX_LINE_IN,
1434 } },
1435 },
1436 [EM2800_BOARD_GRABBEEX_USB2800] = {
1437 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1438 .is_em2800 = 1,
1439 .decoder = EM28XX_SAA711X,
1440 .tuner_type = TUNER_ABSENT, /* capture only board */
1441 .input = { {
1442 .type = EM28XX_VMUX_COMPOSITE,
1443 .vmux = SAA7115_COMPOSITE0,
1444 .amux = EM28XX_AMUX_LINE_IN,
1445 }, {
1446 .type = EM28XX_VMUX_SVIDEO,
1447 .vmux = SAA7115_SVIDEO3,
1448 .amux = EM28XX_AMUX_LINE_IN,
1449 } },
1450 },
1451 [EM2800_BOARD_VC211A] = {
1452 .name = "Actionmaster/LinXcel/Digitus VC211A",
1453 .is_em2800 = 1,
1454 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1455 .decoder = EM28XX_SAA711X,
1456 .input = { {
1457 .type = EM28XX_VMUX_COMPOSITE,
1458 .vmux = SAA7115_COMPOSITE0,
1459 .amux = EM28XX_AMUX_LINE_IN,
1460 .gpio = vc211a_enable,
1461 }, {
1462 .type = EM28XX_VMUX_SVIDEO,
1463 .vmux = SAA7115_SVIDEO3,
1464 .amux = EM28XX_AMUX_LINE_IN,
1465 .gpio = vc211a_enable,
1466 } },
1467 },
1468 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1469 .name = "Leadtek Winfast USB II",
1470 .is_em2800 = 1,
1471 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1472 .tda9887_conf = TDA9887_PRESENT,
1473 .decoder = EM28XX_SAA711X,
1474 .input = { {
1475 .type = EM28XX_VMUX_TELEVISION,
1476 .vmux = SAA7115_COMPOSITE2,
1477 .amux = EM28XX_AMUX_VIDEO,
1478 }, {
1479 .type = EM28XX_VMUX_COMPOSITE,
1480 .vmux = SAA7115_COMPOSITE0,
1481 .amux = EM28XX_AMUX_LINE_IN,
1482 }, {
1483 .type = EM28XX_VMUX_SVIDEO,
1484 .vmux = SAA7115_SVIDEO3,
1485 .amux = EM28XX_AMUX_LINE_IN,
1486 } },
1487 },
1488 [EM2800_BOARD_KWORLD_USB2800] = {
1489 .name = "Kworld USB2800",
1490 .is_em2800 = 1,
1491 .tuner_type = TUNER_PHILIPS_FCV1236D,
1492 .tda9887_conf = TDA9887_PRESENT,
1493 .decoder = EM28XX_SAA711X,
1494 .input = { {
1495 .type = EM28XX_VMUX_TELEVISION,
1496 .vmux = SAA7115_COMPOSITE2,
1497 .amux = EM28XX_AMUX_VIDEO,
1498 }, {
1499 .type = EM28XX_VMUX_COMPOSITE,
1500 .vmux = SAA7115_COMPOSITE0,
1501 .amux = EM28XX_AMUX_LINE_IN,
1502 }, {
1503 .type = EM28XX_VMUX_SVIDEO,
1504 .vmux = SAA7115_SVIDEO3,
1505 .amux = EM28XX_AMUX_LINE_IN,
1506 } },
1507 },
1508 [EM2820_BOARD_PINNACLE_DVC_90] = {
1509 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1510 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1511 .tuner_type = TUNER_ABSENT, /* capture only board */
1512 .decoder = EM28XX_SAA711X,
1513 .input = { {
1514 .type = EM28XX_VMUX_COMPOSITE,
1515 .vmux = SAA7115_COMPOSITE0,
1516 .amux = EM28XX_AMUX_LINE_IN,
1517 }, {
1518 .type = EM28XX_VMUX_SVIDEO,
1519 .vmux = SAA7115_SVIDEO3,
1520 .amux = EM28XX_AMUX_LINE_IN,
1521 } },
1522 },
1523 [EM2800_BOARD_VGEAR_POCKETTV] = {
1524 .name = "V-Gear PocketTV",
1525 .is_em2800 = 1,
1526 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1527 .tda9887_conf = TDA9887_PRESENT,
1528 .decoder = EM28XX_SAA711X,
1529 .input = { {
1530 .type = EM28XX_VMUX_TELEVISION,
1531 .vmux = SAA7115_COMPOSITE2,
1532 .amux = EM28XX_AMUX_VIDEO,
1533 }, {
1534 .type = EM28XX_VMUX_COMPOSITE,
1535 .vmux = SAA7115_COMPOSITE0,
1536 .amux = EM28XX_AMUX_LINE_IN,
1537 }, {
1538 .type = EM28XX_VMUX_SVIDEO,
1539 .vmux = SAA7115_SVIDEO3,
1540 .amux = EM28XX_AMUX_LINE_IN,
1541 } },
1542 },
1543 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1544 .name = "Pixelview PlayTV Box 4 USB 2.0",
1545 .tda9887_conf = TDA9887_PRESENT,
1546 .tuner_type = TUNER_YMEC_TVF_5533MF,
1547 .decoder = EM28XX_SAA711X,
1548 .input = { {
1549 .type = EM28XX_VMUX_TELEVISION,
1550 .vmux = SAA7115_COMPOSITE2,
1551 .amux = EM28XX_AMUX_VIDEO,
1552 .aout = EM28XX_AOUT_MONO | /* I2S */
1553 EM28XX_AOUT_MASTER, /* Line out pin */
1554 }, {
1555 .type = EM28XX_VMUX_COMPOSITE,
1556 .vmux = SAA7115_COMPOSITE0,
1557 .amux = EM28XX_AMUX_LINE_IN,
1558 }, {
1559 .type = EM28XX_VMUX_SVIDEO,
1560 .vmux = SAA7115_SVIDEO3,
1561 .amux = EM28XX_AMUX_LINE_IN,
1562 } },
1563 },
1564 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1565 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1566 .buttons = std_snapshot_button,
1567 .tda9887_conf = TDA9887_PRESENT,
1568 .tuner_type = TUNER_YMEC_TVF_5533MF,
1569 .tuner_addr = 0x60,
1570 .decoder = EM28XX_SAA711X,
1571 .input = { {
1572 .type = EM28XX_VMUX_TELEVISION,
1573 .vmux = SAA7115_COMPOSITE2,
1574 .amux = EM28XX_AMUX_VIDEO,
1575 .aout = EM28XX_AOUT_MONO | /* I2S */
1576 EM28XX_AOUT_MASTER, /* Line out pin */
1577 }, {
1578 .type = EM28XX_VMUX_COMPOSITE,
1579 .vmux = SAA7115_COMPOSITE0,
1580 .amux = EM28XX_AMUX_LINE_IN,
1581 }, {
1582 .type = EM28XX_VMUX_SVIDEO,
1583 .vmux = SAA7115_SVIDEO3,
1584 .amux = EM28XX_AMUX_LINE_IN,
1585 } },
1586 },
1587 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1588 .name = "EM2860/SAA711X Reference Design",
1589 .buttons = std_snapshot_button,
1590 .tuner_type = TUNER_ABSENT,
1591 .decoder = EM28XX_SAA711X,
1592 .input = { {
1593 .type = EM28XX_VMUX_SVIDEO,
1594 .vmux = SAA7115_SVIDEO3,
1595 }, {
1596 .type = EM28XX_VMUX_COMPOSITE,
1597 .vmux = SAA7115_COMPOSITE0,
1598 } },
1599 },
1600
1601 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1602 .def_i2c_bus = 1,
1603 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1604 EM28XX_I2C_FREQ_100_KHZ,
1605 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1606 .name = "EM2874 Leadership ISDBT",
1607 .tuner_type = TUNER_ABSENT,
1608 .tuner_gpio = leadership_reset,
1609 .dvb_gpio = leadership_digital,
1610 .has_dvb = 1,
1611 },
1612
1613 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1614 .name = "MSI DigiVox A/D",
1615 .valid = EM28XX_BOARD_NOT_VALIDATED,
1616 .tuner_type = TUNER_XC2028,
1617 .tuner_gpio = default_tuner_gpio,
1618 .decoder = EM28XX_TVP5150,
1619 .input = { {
1620 .type = EM28XX_VMUX_TELEVISION,
1621 .vmux = TVP5150_COMPOSITE0,
1622 .amux = EM28XX_AMUX_VIDEO,
1623 .gpio = em2880_msi_digivox_ad_analog,
1624 }, {
1625 .type = EM28XX_VMUX_COMPOSITE,
1626 .vmux = TVP5150_COMPOSITE1,
1627 .amux = EM28XX_AMUX_LINE_IN,
1628 .gpio = em2880_msi_digivox_ad_analog,
1629 }, {
1630 .type = EM28XX_VMUX_SVIDEO,
1631 .vmux = TVP5150_SVIDEO,
1632 .amux = EM28XX_AMUX_LINE_IN,
1633 .gpio = em2880_msi_digivox_ad_analog,
1634 } },
1635 },
1636 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1637 .name = "MSI DigiVox A/D II",
1638 .valid = EM28XX_BOARD_NOT_VALIDATED,
1639 .tuner_type = TUNER_XC2028,
1640 .tuner_gpio = default_tuner_gpio,
1641 .decoder = EM28XX_TVP5150,
1642 .input = { {
1643 .type = EM28XX_VMUX_TELEVISION,
1644 .vmux = TVP5150_COMPOSITE0,
1645 .amux = EM28XX_AMUX_VIDEO,
1646 .gpio = em2880_msi_digivox_ad_analog,
1647 }, {
1648 .type = EM28XX_VMUX_COMPOSITE,
1649 .vmux = TVP5150_COMPOSITE1,
1650 .amux = EM28XX_AMUX_LINE_IN,
1651 .gpio = em2880_msi_digivox_ad_analog,
1652 }, {
1653 .type = EM28XX_VMUX_SVIDEO,
1654 .vmux = TVP5150_SVIDEO,
1655 .amux = EM28XX_AMUX_LINE_IN,
1656 .gpio = em2880_msi_digivox_ad_analog,
1657 } },
1658 },
1659 [EM2880_BOARD_KWORLD_DVB_305U] = {
1660 .name = "KWorld DVB-T 305U",
1661 .tuner_type = TUNER_XC2028,
1662 .tuner_gpio = default_tuner_gpio,
1663 .decoder = EM28XX_TVP5150,
1664 .input = { {
1665 .type = EM28XX_VMUX_TELEVISION,
1666 .vmux = TVP5150_COMPOSITE0,
1667 .amux = EM28XX_AMUX_VIDEO,
1668 }, {
1669 .type = EM28XX_VMUX_COMPOSITE,
1670 .vmux = TVP5150_COMPOSITE1,
1671 .amux = EM28XX_AMUX_LINE_IN,
1672 }, {
1673 .type = EM28XX_VMUX_SVIDEO,
1674 .vmux = TVP5150_SVIDEO,
1675 .amux = EM28XX_AMUX_LINE_IN,
1676 } },
1677 },
1678 [EM2880_BOARD_KWORLD_DVB_310U] = {
1679 .name = "KWorld DVB-T 310U",
1680 .tuner_type = TUNER_XC2028,
1681 .tuner_gpio = default_tuner_gpio,
1682 .has_dvb = 1,
1683 .dvb_gpio = default_digital,
1684 .mts_firmware = 1,
1685 .decoder = EM28XX_TVP5150,
1686 .input = { {
1687 .type = EM28XX_VMUX_TELEVISION,
1688 .vmux = TVP5150_COMPOSITE0,
1689 .amux = EM28XX_AMUX_VIDEO,
1690 .gpio = default_analog,
1691 }, {
1692 .type = EM28XX_VMUX_COMPOSITE,
1693 .vmux = TVP5150_COMPOSITE1,
1694 .amux = EM28XX_AMUX_LINE_IN,
1695 .gpio = default_analog,
1696 }, { /* S-video has not been tested yet */
1697 .type = EM28XX_VMUX_SVIDEO,
1698 .vmux = TVP5150_SVIDEO,
1699 .amux = EM28XX_AMUX_LINE_IN,
1700 .gpio = default_analog,
1701 } },
1702 },
1703 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1704 .name = "KWorld ATSC 315U HDTV TV Box",
1705 .valid = EM28XX_BOARD_NOT_VALIDATED,
1706 .tuner_type = TUNER_THOMSON_DTT761X,
1707 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1708 .tda9887_conf = TDA9887_PRESENT,
1709 .decoder = EM28XX_SAA711X,
1710 .has_dvb = 1,
1711 .dvb_gpio = em2882_kworld_315u_digital,
1712 .ir_codes = RC_MAP_KWORLD_315U,
1713 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1714 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1715 /* Analog mode - still not ready */
1716 /*.input = { {
1717 .type = EM28XX_VMUX_TELEVISION,
1718 .vmux = SAA7115_COMPOSITE2,
1719 .amux = EM28XX_AMUX_VIDEO,
1720 .gpio = em2882_kworld_315u_analog,
1721 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1722 }, {
1723 .type = EM28XX_VMUX_COMPOSITE,
1724 .vmux = SAA7115_COMPOSITE0,
1725 .amux = EM28XX_AMUX_LINE_IN,
1726 .gpio = em2882_kworld_315u_analog1,
1727 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1728 }, {
1729 .type = EM28XX_VMUX_SVIDEO,
1730 .vmux = SAA7115_SVIDEO3,
1731 .amux = EM28XX_AMUX_LINE_IN,
1732 .gpio = em2882_kworld_315u_analog1,
1733 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1734 } }, */
1735 },
1736 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1737 .name = "Empire dual TV",
1738 .tuner_type = TUNER_XC2028,
1739 .tuner_gpio = default_tuner_gpio,
1740 .has_dvb = 1,
1741 .dvb_gpio = default_digital,
1742 .mts_firmware = 1,
1743 .decoder = EM28XX_TVP5150,
1744 .input = { {
1745 .type = EM28XX_VMUX_TELEVISION,
1746 .vmux = TVP5150_COMPOSITE0,
1747 .amux = EM28XX_AMUX_VIDEO,
1748 .gpio = default_analog,
1749 }, {
1750 .type = EM28XX_VMUX_COMPOSITE,
1751 .vmux = TVP5150_COMPOSITE1,
1752 .amux = EM28XX_AMUX_LINE_IN,
1753 .gpio = default_analog,
1754 }, {
1755 .type = EM28XX_VMUX_SVIDEO,
1756 .vmux = TVP5150_SVIDEO,
1757 .amux = EM28XX_AMUX_LINE_IN,
1758 .gpio = default_analog,
1759 } },
1760 },
1761 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1762 .name = "DNT DA2 Hybrid",
1763 .valid = EM28XX_BOARD_NOT_VALIDATED,
1764 .tuner_type = TUNER_XC2028,
1765 .tuner_gpio = default_tuner_gpio,
1766 .decoder = EM28XX_TVP5150,
1767 .input = { {
1768 .type = EM28XX_VMUX_TELEVISION,
1769 .vmux = TVP5150_COMPOSITE0,
1770 .amux = EM28XX_AMUX_VIDEO,
1771 .gpio = default_analog,
1772 }, {
1773 .type = EM28XX_VMUX_COMPOSITE,
1774 .vmux = TVP5150_COMPOSITE1,
1775 .amux = EM28XX_AMUX_LINE_IN,
1776 .gpio = default_analog,
1777 }, {
1778 .type = EM28XX_VMUX_SVIDEO,
1779 .vmux = TVP5150_SVIDEO,
1780 .amux = EM28XX_AMUX_LINE_IN,
1781 .gpio = default_analog,
1782 } },
1783 },
1784 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1785 .name = "Pinnacle Hybrid Pro",
1786 .tuner_type = TUNER_XC2028,
1787 .tuner_gpio = default_tuner_gpio,
1788 .decoder = EM28XX_TVP5150,
1789 .has_dvb = 1,
1790 .dvb_gpio = pinnacle_hybrid_pro_digital,
1791 .input = { {
1792 .type = EM28XX_VMUX_TELEVISION,
1793 .vmux = TVP5150_COMPOSITE0,
1794 .amux = EM28XX_AMUX_VIDEO,
1795 .gpio = pinnacle_hybrid_pro_analog,
1796 }, {
1797 .type = EM28XX_VMUX_COMPOSITE,
1798 .vmux = TVP5150_COMPOSITE1,
1799 .amux = EM28XX_AMUX_LINE_IN,
1800 .gpio = pinnacle_hybrid_pro_analog,
1801 }, {
1802 .type = EM28XX_VMUX_SVIDEO,
1803 .vmux = TVP5150_SVIDEO,
1804 .amux = EM28XX_AMUX_LINE_IN,
1805 .gpio = pinnacle_hybrid_pro_analog,
1806 } },
1807 },
1808 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1809 .name = "Pinnacle Hybrid Pro (330e)",
1810 .tuner_type = TUNER_XC2028,
1811 .tuner_gpio = default_tuner_gpio,
1812 .mts_firmware = 1,
1813 .has_dvb = 1,
1814 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1815 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1816 .decoder = EM28XX_TVP5150,
1817 .input = { {
1818 .type = EM28XX_VMUX_TELEVISION,
1819 .vmux = TVP5150_COMPOSITE0,
1820 .amux = EM28XX_AMUX_VIDEO,
1821 .gpio = hauppauge_wintv_hvr_900_analog,
1822 }, {
1823 .type = EM28XX_VMUX_COMPOSITE,
1824 .vmux = TVP5150_COMPOSITE1,
1825 .amux = EM28XX_AMUX_LINE_IN,
1826 .gpio = hauppauge_wintv_hvr_900_analog,
1827 }, {
1828 .type = EM28XX_VMUX_SVIDEO,
1829 .vmux = TVP5150_SVIDEO,
1830 .amux = EM28XX_AMUX_LINE_IN,
1831 .gpio = hauppauge_wintv_hvr_900_analog,
1832 } },
1833 },
1834 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1835 .name = "Kworld VS-DVB-T 323UR",
1836 .tuner_type = TUNER_XC2028,
1837 .tuner_gpio = default_tuner_gpio,
1838 .decoder = EM28XX_TVP5150,
1839 .mts_firmware = 1,
1840 .has_dvb = 1,
1841 .dvb_gpio = kworld_330u_digital,
1842 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1843 .ir_codes = RC_MAP_KWORLD_315U,
1844 .input = { {
1845 .type = EM28XX_VMUX_TELEVISION,
1846 .vmux = TVP5150_COMPOSITE0,
1847 .amux = EM28XX_AMUX_VIDEO,
1848 }, {
1849 .type = EM28XX_VMUX_COMPOSITE,
1850 .vmux = TVP5150_COMPOSITE1,
1851 .amux = EM28XX_AMUX_LINE_IN,
1852 }, {
1853 .type = EM28XX_VMUX_SVIDEO,
1854 .vmux = TVP5150_SVIDEO,
1855 .amux = EM28XX_AMUX_LINE_IN,
1856 } },
1857 },
1858 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1859 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1860 .tuner_type = TUNER_XC2028,
1861 .tuner_gpio = default_tuner_gpio,
1862 .mts_firmware = 1,
1863 .decoder = EM28XX_TVP5150,
1864 .has_dvb = 1,
1865 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1866 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1867 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1868 .input = { {
1869 .type = EM28XX_VMUX_TELEVISION,
1870 .vmux = TVP5150_COMPOSITE0,
1871 .amux = EM28XX_AMUX_VIDEO,
1872 .gpio = hauppauge_wintv_hvr_900_analog,
1873 }, {
1874 .type = EM28XX_VMUX_COMPOSITE,
1875 .vmux = TVP5150_COMPOSITE1,
1876 .amux = EM28XX_AMUX_LINE_IN,
1877 .gpio = hauppauge_wintv_hvr_900_analog,
1878 }, {
1879 .type = EM28XX_VMUX_SVIDEO,
1880 .vmux = TVP5150_SVIDEO,
1881 .amux = EM28XX_AMUX_LINE_IN,
1882 .gpio = hauppauge_wintv_hvr_900_analog,
1883 } },
1884 },
1885 [EM2882_BOARD_DIKOM_DK300] = {
1886 .name = "Dikom DK300",
1887 .tuner_type = TUNER_XC2028,
1888 .tuner_gpio = default_tuner_gpio,
1889 .decoder = EM28XX_TVP5150,
1890 .mts_firmware = 1,
1891 .has_dvb = 1,
1892 .dvb_gpio = dikom_dk300_digital,
1893 .input = { {
1894 .type = EM28XX_VMUX_TELEVISION,
1895 .vmux = TVP5150_COMPOSITE0,
1896 .amux = EM28XX_AMUX_VIDEO,
1897 .gpio = default_analog,
1898 } },
1899 },
1900 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1901 .name = "Kworld PlusTV HD Hybrid 330",
1902 .tuner_type = TUNER_XC2028,
1903 .tuner_gpio = default_tuner_gpio,
1904 .decoder = EM28XX_TVP5150,
1905 .mts_firmware = 1,
1906 .has_dvb = 1,
1907 .dvb_gpio = kworld_330u_digital,
1908 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1909 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1910 EM28XX_I2C_EEPROM_ON_BOARD |
1911 EM28XX_I2C_EEPROM_KEY_VALID,
1912 .input = { {
1913 .type = EM28XX_VMUX_TELEVISION,
1914 .vmux = TVP5150_COMPOSITE0,
1915 .amux = EM28XX_AMUX_VIDEO,
1916 .gpio = kworld_330u_analog,
1917 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1918 }, {
1919 .type = EM28XX_VMUX_COMPOSITE,
1920 .vmux = TVP5150_COMPOSITE1,
1921 .amux = EM28XX_AMUX_LINE_IN,
1922 .gpio = kworld_330u_analog,
1923 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1924 }, {
1925 .type = EM28XX_VMUX_SVIDEO,
1926 .vmux = TVP5150_SVIDEO,
1927 .amux = EM28XX_AMUX_LINE_IN,
1928 .gpio = kworld_330u_analog,
1929 } },
1930 },
1931 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1932 .name = "Compro VideoMate ForYou/Stereo",
1933 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1934 .tvaudio_addr = 0xb0,
1935 .tda9887_conf = TDA9887_PRESENT,
1936 .decoder = EM28XX_TVP5150,
1937 .adecoder = EM28XX_TVAUDIO,
1938 .mute_gpio = compro_mute_gpio,
1939 .input = { {
1940 .type = EM28XX_VMUX_TELEVISION,
1941 .vmux = TVP5150_COMPOSITE0,
1942 .amux = EM28XX_AMUX_VIDEO,
1943 .gpio = compro_unmute_tv_gpio,
1944 }, {
1945 .type = EM28XX_VMUX_SVIDEO,
1946 .vmux = TVP5150_SVIDEO,
1947 .amux = EM28XX_AMUX_LINE_IN,
1948 .gpio = compro_unmute_svid_gpio,
1949 } },
1950 },
1951 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1952 .name = "Kaiomy TVnPC U2",
1953 .vchannels = 3,
1954 .tuner_type = TUNER_XC2028,
1955 .tuner_addr = 0x61,
1956 .mts_firmware = 1,
1957 .decoder = EM28XX_TVP5150,
1958 .tuner_gpio = default_tuner_gpio,
1959 .ir_codes = RC_MAP_KAIOMY,
1960 .input = { {
1961 .type = EM28XX_VMUX_TELEVISION,
1962 .vmux = TVP5150_COMPOSITE0,
1963 .amux = EM28XX_AMUX_VIDEO,
1964
1965 }, {
1966 .type = EM28XX_VMUX_COMPOSITE,
1967 .vmux = TVP5150_COMPOSITE1,
1968 .amux = EM28XX_AMUX_LINE_IN,
1969 }, {
1970 .type = EM28XX_VMUX_SVIDEO,
1971 .vmux = TVP5150_SVIDEO,
1972 .amux = EM28XX_AMUX_LINE_IN,
1973 } },
1974 .radio = {
1975 .type = EM28XX_RADIO,
1976 .amux = EM28XX_AMUX_LINE_IN,
1977 }
1978 },
1979 [EM2860_BOARD_EASYCAP] = {
1980 .name = "Easy Cap Capture DC-60",
1981 .vchannels = 2,
1982 .tuner_type = TUNER_ABSENT,
1983 .decoder = EM28XX_SAA711X,
1984 .input = { {
1985 .type = EM28XX_VMUX_COMPOSITE,
1986 .vmux = SAA7115_COMPOSITE0,
1987 .amux = EM28XX_AMUX_LINE_IN,
1988 }, {
1989 .type = EM28XX_VMUX_SVIDEO,
1990 .vmux = SAA7115_SVIDEO3,
1991 .amux = EM28XX_AMUX_LINE_IN,
1992 } },
1993 },
1994 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1995 .name = "IO-DATA GV-MVP/SZ",
1996 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1997 .tuner_gpio = default_tuner_gpio,
1998 .tda9887_conf = TDA9887_PRESENT,
1999 .decoder = EM28XX_TVP5150,
2000 .input = { {
2001 .type = EM28XX_VMUX_TELEVISION,
2002 .vmux = TVP5150_COMPOSITE0,
2003 .amux = EM28XX_AMUX_VIDEO,
2004 }, { /* Composite has not been tested yet */
2005 .type = EM28XX_VMUX_COMPOSITE,
2006 .vmux = TVP5150_COMPOSITE1,
2007 .amux = EM28XX_AMUX_VIDEO,
2008 }, { /* S-video has not been tested yet */
2009 .type = EM28XX_VMUX_SVIDEO,
2010 .vmux = TVP5150_SVIDEO,
2011 .amux = EM28XX_AMUX_VIDEO,
2012 } },
2013 },
2014 [EM2860_BOARD_TERRATEC_GRABBY] = {
2015 .name = "Terratec Grabby",
2016 .vchannels = 2,
2017 .tuner_type = TUNER_ABSENT,
2018 .decoder = EM28XX_SAA711X,
2019 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2020 .input = { {
2021 .type = EM28XX_VMUX_COMPOSITE,
2022 .vmux = SAA7115_COMPOSITE0,
2023 .amux = EM28XX_AMUX_LINE_IN,
2024 }, {
2025 .type = EM28XX_VMUX_SVIDEO,
2026 .vmux = SAA7115_SVIDEO3,
2027 .amux = EM28XX_AMUX_LINE_IN,
2028 } },
2029 .buttons = std_snapshot_button,
2030 .leds = terratec_grabby_leds,
2031 },
2032 [EM2860_BOARD_TERRATEC_AV350] = {
2033 .name = "Terratec AV350",
2034 .vchannels = 2,
2035 .tuner_type = TUNER_ABSENT,
2036 .decoder = EM28XX_TVP5150,
2037 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2038 .mute_gpio = terratec_av350_mute_gpio,
2039 .input = { {
2040 .type = EM28XX_VMUX_COMPOSITE,
2041 .vmux = TVP5150_COMPOSITE1,
2042 .amux = EM28XX_AUDIO_SRC_LINE,
2043 .gpio = terratec_av350_unmute_gpio,
2044
2045 }, {
2046 .type = EM28XX_VMUX_SVIDEO,
2047 .vmux = TVP5150_SVIDEO,
2048 .amux = EM28XX_AUDIO_SRC_LINE,
2049 .gpio = terratec_av350_unmute_gpio,
2050 } },
2051 },
2052
2053 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
2054 .name = "Elgato Video Capture",
2055 .decoder = EM28XX_SAA711X,
2056 .tuner_type = TUNER_ABSENT, /* Capture only device */
2057 .input = { {
2058 .type = EM28XX_VMUX_COMPOSITE,
2059 .vmux = SAA7115_COMPOSITE0,
2060 .amux = EM28XX_AMUX_LINE_IN,
2061 }, {
2062 .type = EM28XX_VMUX_SVIDEO,
2063 .vmux = SAA7115_SVIDEO3,
2064 .amux = EM28XX_AMUX_LINE_IN,
2065 } },
2066 },
2067
2068 [EM2882_BOARD_EVGA_INDTUBE] = {
2069 .name = "Evga inDtube",
2070 .tuner_type = TUNER_XC2028,
2071 .tuner_gpio = default_tuner_gpio,
2072 .decoder = EM28XX_TVP5150,
2073 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
2074 .mts_firmware = 1,
2075 .has_dvb = 1,
2076 .dvb_gpio = evga_indtube_digital,
2077 .ir_codes = RC_MAP_EVGA_INDTUBE,
2078 .input = { {
2079 .type = EM28XX_VMUX_TELEVISION,
2080 .vmux = TVP5150_COMPOSITE0,
2081 .amux = EM28XX_AMUX_VIDEO,
2082 .gpio = evga_indtube_analog,
2083 }, {
2084 .type = EM28XX_VMUX_COMPOSITE,
2085 .vmux = TVP5150_COMPOSITE1,
2086 .amux = EM28XX_AMUX_LINE_IN,
2087 .gpio = evga_indtube_analog,
2088 }, {
2089 .type = EM28XX_VMUX_SVIDEO,
2090 .vmux = TVP5150_SVIDEO,
2091 .amux = EM28XX_AMUX_LINE_IN,
2092 .gpio = evga_indtube_analog,
2093 } },
2094 },
2095 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
2096 Infineon TUA6034) */
2097 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
2098 .name = "Reddo DVB-C USB TV Box",
2099 .tuner_type = TUNER_ABSENT,
2100 .tuner_gpio = reddo_dvb_c_usb_box,
2101 .has_dvb = 1,
2102 },
2103 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
2104 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
2105 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
2106 [EM2870_BOARD_KWORLD_A340] = {
2107 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
2108 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
2109 .has_dvb = 1,
2110 .dvb_gpio = kworld_a340_digital,
2111 .tuner_gpio = default_tuner_gpio,
2112 },
2113 /* 2013:024f PCTV nanoStick T2 290e.
2114 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
2115 [EM28174_BOARD_PCTV_290E] = {
2116 .name = "PCTV nanoStick T2 290e",
2117 .def_i2c_bus = 1,
2118 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
2119 .tuner_type = TUNER_ABSENT,
2120 .tuner_gpio = pctv_290e,
2121 .has_dvb = 1,
2122 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2123 },
2124 /* 2013:024f PCTV DVB-S2 Stick 460e
2125 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
2126 [EM28174_BOARD_PCTV_460E] = {
2127 .def_i2c_bus = 1,
2128 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2129 .name = "PCTV DVB-S2 Stick (460e)",
2130 .tuner_type = TUNER_ABSENT,
2131 .tuner_gpio = pctv_460e,
2132 .has_dvb = 1,
2133 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2134 },
2135 /* eb1a:5006 Honestech VIDBOX NW03
2136 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
2137 [EM2860_BOARD_HT_VIDBOX_NW03] = {
2138 .name = "Honestech Vidbox NW03",
2139 .tuner_type = TUNER_ABSENT,
2140 .decoder = EM28XX_SAA711X,
2141 .input = { {
2142 .type = EM28XX_VMUX_COMPOSITE,
2143 .vmux = SAA7115_COMPOSITE0,
2144 .amux = EM28XX_AMUX_LINE_IN,
2145 }, {
2146 .type = EM28XX_VMUX_SVIDEO,
2147 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
2148 .amux = EM28XX_AMUX_LINE_IN,
2149 } },
2150 },
2151 /* 1b80:e425 MaxMedia UB425-TC
2152 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
2153 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
2154 .name = "MaxMedia UB425-TC",
2155 .tuner_type = TUNER_ABSENT,
2156 .tuner_gpio = maxmedia_ub425_tc,
2157 .has_dvb = 1,
2158 .ir_codes = RC_MAP_REDDO,
2159 .def_i2c_bus = 1,
2160 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2161 EM28XX_I2C_FREQ_400_KHZ,
2162 },
2163 /* 2304:0242 PCTV QuatroStick (510e)
2164 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
2165 [EM2884_BOARD_PCTV_510E] = {
2166 .name = "PCTV QuatroStick (510e)",
2167 .tuner_type = TUNER_ABSENT,
2168 .tuner_gpio = pctv_510e,
2169 .has_dvb = 1,
2170 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2171 .def_i2c_bus = 1,
2172 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2173 EM28XX_I2C_FREQ_400_KHZ,
2174 },
2175 /* 2013:0251 PCTV QuatroStick nano (520e)
2176 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
2177 [EM2884_BOARD_PCTV_520E] = {
2178 .name = "PCTV QuatroStick nano (520e)",
2179 .tuner_type = TUNER_ABSENT,
2180 .tuner_gpio = pctv_520e,
2181 .has_dvb = 1,
2182 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2183 .def_i2c_bus = 1,
2184 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2185 EM28XX_I2C_FREQ_400_KHZ,
2186 },
2187 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
2188 .name = "Terratec Cinergy HTC USB XS",
2189 .has_dvb = 1,
2190 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
2191 .tuner_type = TUNER_ABSENT,
2192 .def_i2c_bus = 1,
2193 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2194 EM28XX_I2C_FREQ_400_KHZ,
2195 },
2196 /* 1b80:e1cc Delock 61959
2197 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2198 * mostly the same as MaxMedia UB-425-TC but different remote */
2199 [EM2874_BOARD_DELOCK_61959] = {
2200 .name = "Delock 61959",
2201 .tuner_type = TUNER_ABSENT,
2202 .tuner_gpio = maxmedia_ub425_tc,
2203 .has_dvb = 1,
2204 .ir_codes = RC_MAP_DELOCK_61959,
2205 .def_i2c_bus = 1,
2206 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2207 EM28XX_I2C_FREQ_400_KHZ,
2208 },
2209 /*
2210 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
2211 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2212 */
2213 [EM2874_BOARD_KWORLD_UB435Q_V2] = {
2214 .name = "KWorld USB ATSC TV Stick UB435-Q V2",
2215 .tuner_type = TUNER_ABSENT,
2216 .has_dvb = 1,
2217 .dvb_gpio = kworld_a340_digital,
2218 .tuner_gpio = default_tuner_gpio,
2219 .def_i2c_bus = 1,
2220 },
2221 /*
2222 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
2223 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2224 */
2225 [EM2874_BOARD_KWORLD_UB435Q_V3] = {
2226 .name = "KWorld USB ATSC TV Stick UB435-Q V3",
2227 .tuner_type = TUNER_ABSENT,
2228 .has_dvb = 1,
2229 .tuner_gpio = kworld_ub435q_v3_digital,
2230 .def_i2c_bus = 1,
2231 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2232 EM28XX_I2C_FREQ_100_KHZ,
2233 .leds = kworld_ub435q_v3_leds,
2234 },
2235 [EM2874_BOARD_PCTV_HD_MINI_80E] = {
2236 .name = "Pinnacle PCTV HD Mini",
2237 .tuner_type = TUNER_ABSENT,
2238 .has_dvb = 1,
2239 .dvb_gpio = em2874_pctv_80e_digital,
2240 .decoder = EM28XX_NODECODER,
2241 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2242 .leds = pctv_80e_leds,
2243 },
2244 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
2245 * Empia EM2765 + OmniVision OV2640 */
2246 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
2247 .name = "SpeedLink Vicious And Devine Laplace webcam",
2248 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
2249 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2250 EM28XX_I2C_FREQ_100_KHZ,
2251 .def_i2c_bus = 1,
2252 .tuner_type = TUNER_ABSENT,
2253 .is_webcam = 1,
2254 .input = { {
2255 .type = EM28XX_VMUX_COMPOSITE,
2256 .amux = EM28XX_AMUX_VIDEO,
2257 .gpio = speedlink_vad_laplace_reg_seq,
2258 } },
2259 .buttons = speedlink_vad_laplace_buttons,
2260 .leds = speedlink_vad_laplace_leds,
2261 },
2262 /* 2013:0258 PCTV DVB-S2 Stick (461e)
2263 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */
2264 [EM28178_BOARD_PCTV_461E] = {
2265 .def_i2c_bus = 1,
2266 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2267 .name = "PCTV DVB-S2 Stick (461e)",
2268 .tuner_type = TUNER_ABSENT,
2269 .tuner_gpio = pctv_461e,
2270 .has_dvb = 1,
2271 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2272 },
2273 /* 2013:025f PCTV tripleStick (292e).
2274 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */
2275 [EM28178_BOARD_PCTV_292E] = {
2276 .name = "PCTV tripleStick (292e)",
2277 .def_i2c_bus = 1,
2278 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2279 .tuner_type = TUNER_ABSENT,
2280 .tuner_gpio = pctv_292e,
2281 .has_dvb = 1,
2282 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2283 },
2284 [EM2861_BOARD_LEADTEK_VC100] = {
2285 .name = "Leadtek VC100",
2286 .tuner_type = TUNER_ABSENT, /* Capture only device */
2287 .decoder = EM28XX_TVP5150,
2288 .input = { {
2289 .type = EM28XX_VMUX_COMPOSITE,
2290 .vmux = TVP5150_COMPOSITE1,
2291 .amux = EM28XX_AMUX_LINE_IN,
2292 }, {
2293 .type = EM28XX_VMUX_SVIDEO,
2294 .vmux = TVP5150_SVIDEO,
2295 .amux = EM28XX_AMUX_LINE_IN,
2296 } },
2297 },
2298 /* eb1a:8179 Terratec Cinergy T2 Stick HD.
2299 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */
2300 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
2301 .name = "Terratec Cinergy T2 Stick HD",
2302 .def_i2c_bus = 1,
2303 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2304 .tuner_type = TUNER_ABSENT,
2305 .tuner_gpio = terratec_t2_stick_hd,
2306 .has_dvb = 1,
2307 .ir_codes = RC_MAP_TERRATEC_SLIM_2,
2308 },
2309 };
2310 EXPORT_SYMBOL_GPL(em28xx_boards);
2311
2312 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
2313
2314 /* table of devices that work with this driver */
2315 struct usb_device_id em28xx_id_table[] = {
2316 { USB_DEVICE(0xeb1a, 0x2750),
2317 .driver_info = EM2750_BOARD_UNKNOWN },
2318 { USB_DEVICE(0xeb1a, 0x2751),
2319 .driver_info = EM2750_BOARD_UNKNOWN },
2320 { USB_DEVICE(0xeb1a, 0x2800),
2321 .driver_info = EM2800_BOARD_UNKNOWN },
2322 { USB_DEVICE(0xeb1a, 0x2710),
2323 .driver_info = EM2820_BOARD_UNKNOWN },
2324 { USB_DEVICE(0xeb1a, 0x2820),
2325 .driver_info = EM2820_BOARD_UNKNOWN },
2326 { USB_DEVICE(0xeb1a, 0x2821),
2327 .driver_info = EM2820_BOARD_UNKNOWN },
2328 { USB_DEVICE(0xeb1a, 0x2860),
2329 .driver_info = EM2820_BOARD_UNKNOWN },
2330 { USB_DEVICE(0xeb1a, 0x2861),
2331 .driver_info = EM2820_BOARD_UNKNOWN },
2332 { USB_DEVICE(0xeb1a, 0x2862),
2333 .driver_info = EM2820_BOARD_UNKNOWN },
2334 { USB_DEVICE(0xeb1a, 0x2863),
2335 .driver_info = EM2820_BOARD_UNKNOWN },
2336 { USB_DEVICE(0xeb1a, 0x2870),
2337 .driver_info = EM2820_BOARD_UNKNOWN },
2338 { USB_DEVICE(0xeb1a, 0x2881),
2339 .driver_info = EM2820_BOARD_UNKNOWN },
2340 { USB_DEVICE(0xeb1a, 0x2883),
2341 .driver_info = EM2820_BOARD_UNKNOWN },
2342 { USB_DEVICE(0xeb1a, 0x2868),
2343 .driver_info = EM2820_BOARD_UNKNOWN },
2344 { USB_DEVICE(0xeb1a, 0x2875),
2345 .driver_info = EM2820_BOARD_UNKNOWN },
2346 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
2347 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2348 { USB_DEVICE(0xeb1a, 0xe300),
2349 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2350 { USB_DEVICE(0xeb1a, 0xe303),
2351 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2352 { USB_DEVICE(0xeb1a, 0xe305),
2353 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2354 { USB_DEVICE(0xeb1a, 0xe310),
2355 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2356 { USB_DEVICE(0xeb1a, 0xa313),
2357 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2358 { USB_DEVICE(0xeb1a, 0xa316),
2359 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2360 { USB_DEVICE(0xeb1a, 0xe320),
2361 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2362 { USB_DEVICE(0xeb1a, 0xe323),
2363 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2364 { USB_DEVICE(0xeb1a, 0xe350),
2365 .driver_info = EM2870_BOARD_KWORLD_350U },
2366 { USB_DEVICE(0xeb1a, 0xe355),
2367 .driver_info = EM2870_BOARD_KWORLD_355U },
2368 { USB_DEVICE(0xeb1a, 0x2801),
2369 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2370 { USB_DEVICE(0xeb1a, 0xe357),
2371 .driver_info = EM2870_BOARD_KWORLD_355U },
2372 { USB_DEVICE(0xeb1a, 0xe359),
2373 .driver_info = EM2870_BOARD_KWORLD_355U },
2374 { USB_DEVICE(0x1b80, 0xe302),
2375 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2376 { USB_DEVICE(0x1b80, 0xe304),
2377 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2378 { USB_DEVICE(0x0ccd, 0x0036),
2379 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2380 { USB_DEVICE(0x0ccd, 0x004c),
2381 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2382 { USB_DEVICE(0x0ccd, 0x004f),
2383 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2384 { USB_DEVICE(0x0ccd, 0x005e),
2385 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2386 { USB_DEVICE(0x0ccd, 0x0042),
2387 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2388 { USB_DEVICE(0x0ccd, 0x0043),
2389 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 },
2390 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2391 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2392 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2393 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2394 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2395 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2396 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2397 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2398 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
2399 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2400 { USB_DEVICE(0x0ccd, 0x0084),
2401 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2402 { USB_DEVICE(0x0ccd, 0x0096),
2403 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2404 { USB_DEVICE(0x0ccd, 0x10AF),
2405 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2406 { USB_DEVICE(0x0ccd, 0x00b2),
2407 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2408 { USB_DEVICE(0x0fd9, 0x0018),
2409 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
2410 { USB_DEVICE(0x0fd9, 0x0033),
2411 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
2412 { USB_DEVICE(0x185b, 0x2870),
2413 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2414 { USB_DEVICE(0x185b, 0x2041),
2415 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2416 { USB_DEVICE(0x2040, 0x4200),
2417 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2418 { USB_DEVICE(0x2040, 0x4201),
2419 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2420 { USB_DEVICE(0x2040, 0x6500),
2421 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2422 { USB_DEVICE(0x2040, 0x6502),
2423 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2424 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2425 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2426 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2427 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2428 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2429 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2430 { USB_DEVICE(0x2040, 0x651f),
2431 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2432 { USB_DEVICE(0x0438, 0xb002),
2433 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2434 { USB_DEVICE(0x2001, 0xf112),
2435 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2436 { USB_DEVICE(0x2304, 0x0207),
2437 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2438 { USB_DEVICE(0x2304, 0x0208),
2439 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2440 { USB_DEVICE(0x2304, 0x021a),
2441 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2442 { USB_DEVICE(0x2304, 0x0226),
2443 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2444 { USB_DEVICE(0x2304, 0x0227),
2445 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2446 { USB_DEVICE(0x2304, 0x023f),
2447 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
2448 { USB_DEVICE(0x0413, 0x6023),
2449 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2450 { USB_DEVICE(0x093b, 0xa003),
2451 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2452 { USB_DEVICE(0x093b, 0xa005),
2453 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2454 { USB_DEVICE(0x04bb, 0x0515),
2455 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2456 { USB_DEVICE(0xeb1a, 0x50a6),
2457 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2458 { USB_DEVICE(0x1b80, 0xa340),
2459 .driver_info = EM2870_BOARD_KWORLD_A340 },
2460 { USB_DEVICE(0x1b80, 0xe346),
2461 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
2462 { USB_DEVICE(0x1b80, 0xe34c),
2463 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
2464 { USB_DEVICE(0x2013, 0x024f),
2465 .driver_info = EM28174_BOARD_PCTV_290E },
2466 { USB_DEVICE(0x2013, 0x024c),
2467 .driver_info = EM28174_BOARD_PCTV_460E },
2468 { USB_DEVICE(0x2040, 0x1605),
2469 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2470 { USB_DEVICE(0x1b80, 0xe755),
2471 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
2472 { USB_DEVICE(0xeb1a, 0x5006),
2473 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2474 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2475 .driver_info = EM2860_BOARD_EASYCAP },
2476 { USB_DEVICE(0x1b80, 0xe425),
2477 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2478 { USB_DEVICE(0x2304, 0x0242),
2479 .driver_info = EM2884_BOARD_PCTV_510E },
2480 { USB_DEVICE(0x2013, 0x0251),
2481 .driver_info = EM2884_BOARD_PCTV_520E },
2482 { USB_DEVICE(0x1b80, 0xe1cc),
2483 .driver_info = EM2874_BOARD_DELOCK_61959 },
2484 { USB_DEVICE(0x1ae7, 0x9003),
2485 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2486 { USB_DEVICE(0x1ae7, 0x9004),
2487 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2488 { USB_DEVICE(0x2013, 0x0258),
2489 .driver_info = EM28178_BOARD_PCTV_461E },
2490 { USB_DEVICE(0x2013, 0x025f),
2491 .driver_info = EM28178_BOARD_PCTV_292E },
2492 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */
2493 .driver_info = EM28178_BOARD_PCTV_292E },
2494 { USB_DEVICE(0x0413, 0x6f07),
2495 .driver_info = EM2861_BOARD_LEADTEK_VC100 },
2496 { USB_DEVICE(0xeb1a, 0x8179),
2497 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
2498 { },
2499 };
2500 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2501
2502 /*
2503 * EEPROM hash table for devices with generic USB IDs
2504 */
2505 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2506 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2507 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2508 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2509 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2510 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2511 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2512 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2513 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2514 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2515 };
2516
2517 /* I2C devicelist hash table for devices with generic USB IDs */
2518 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2519 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2520 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2521 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2522 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2523 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2524 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2525 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2526 };
2527
2528 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
2529
2530 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2531 {
2532 struct em28xx_i2c_bus *i2c_bus = ptr;
2533 struct em28xx *dev = i2c_bus->dev;
2534 int rc = 0;
2535
2536 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2537 return 0;
2538
2539 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2540 return 0;
2541
2542 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2543
2544 return rc;
2545 }
2546 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2547
2548 static inline void em28xx_set_model(struct em28xx *dev)
2549 {
2550 dev->board = em28xx_boards[dev->model];
2551
2552 /* Those are the default values for the majority of boards
2553 Use those values if not specified otherwise at boards entry
2554 */
2555 if (!dev->board.xclk)
2556 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2557 EM28XX_XCLK_FREQUENCY_12MHZ;
2558
2559 if (!dev->board.i2c_speed)
2560 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2561 EM28XX_I2C_FREQ_100_KHZ;
2562
2563 /* Should be initialized early, for I2C to work */
2564 dev->def_i2c_bus = dev->board.def_i2c_bus;
2565 }
2566
2567 /* Wait until AC97_RESET reports the expected value reliably before proceeding.
2568 * We also check that two unrelated registers accesses don't return the same
2569 * value to avoid premature return.
2570 * This procedure helps ensuring AC97 register accesses are reliable.
2571 */
2572 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
2573 int expected_feat)
2574 {
2575 unsigned long timeout = jiffies + msecs_to_jiffies(2000);
2576 int feat, powerdown;
2577
2578 while (time_is_after_jiffies(timeout)) {
2579 feat = em28xx_read_ac97(dev, AC97_RESET);
2580 if (feat < 0)
2581 return feat;
2582
2583 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN);
2584 if (powerdown < 0)
2585 return powerdown;
2586
2587 if (feat == expected_feat && feat != powerdown)
2588 return 0;
2589
2590 msleep(50);
2591 }
2592
2593 em28xx_warn("AC97 registers access is not reliable !\n");
2594 return -ETIMEDOUT;
2595 }
2596
2597 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2598 * this won't work for boards with generic PCI IDs
2599 */
2600 static void em28xx_pre_card_setup(struct em28xx *dev)
2601 {
2602 /* Set the initial XCLK and I2C clock values based on the board
2603 definition */
2604 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2605 if (!dev->board.is_em2800)
2606 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2607 msleep(50);
2608
2609 /* request some modules */
2610 switch (dev->model) {
2611 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2612 /* Sets the msp34xx I2S speed */
2613 dev->i2s_speed = 2048000;
2614 break;
2615 case EM2861_BOARD_KWORLD_PVRTV_300U:
2616 case EM2880_BOARD_KWORLD_DVB_305U:
2617 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
2618 msleep(10);
2619 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
2620 msleep(10);
2621 break;
2622 case EM2870_BOARD_COMPRO_VIDEOMATE:
2623 /* TODO: someone can do some cleanup here...
2624 not everything's needed */
2625 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2626 msleep(10);
2627 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2628 msleep(10);
2629 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2630 mdelay(70);
2631 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2632 mdelay(70);
2633 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
2634 mdelay(70);
2635 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2636 mdelay(70);
2637 break;
2638 case EM2870_BOARD_TERRATEC_XS_MT2060:
2639 /* this device needs some gpio writes to get the DVB-T
2640 demod work */
2641 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2642 mdelay(70);
2643 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2644 mdelay(70);
2645 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2646 mdelay(70);
2647 break;
2648 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2649 /* this device needs some gpio writes to get the
2650 DVB-T demod work */
2651 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2652 mdelay(70);
2653 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2654 mdelay(70);
2655 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2656 mdelay(70);
2657 break;
2658 case EM2820_BOARD_GADMEI_UTV310:
2659 case EM2820_BOARD_MSI_VOX_USB_2:
2660 /* enables audio for that devices */
2661 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2662 break;
2663
2664 case EM2882_BOARD_KWORLD_ATSC_315U:
2665 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
2666 msleep(10);
2667 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2668 msleep(10);
2669 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2670 msleep(10);
2671 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2672 msleep(10);
2673 break;
2674
2675 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2676 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2677 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2678 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2679 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2680 msleep(10);
2681 em28xx_write_regs(dev, 0x08, "\xff", 1);
2682 msleep(10);
2683 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2684 msleep(10);
2685 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2686
2687 break;
2688 case EM2860_BOARD_EASYCAP:
2689 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2690 break;
2691
2692 case EM2820_BOARD_IODATA_GVMVP_SZ:
2693 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
2694 msleep(70);
2695 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
2696 msleep(10);
2697 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2698 msleep(70);
2699 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2700 msleep(70);
2701 break;
2702
2703 case EM2860_BOARD_TERRATEC_GRABBY:
2704 /* HACK?: Ensure AC97 register reading is reliable before
2705 * proceeding. In practice, this will wait about 1.6 seconds.
2706 */
2707 em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
2708 break;
2709 }
2710
2711 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2712 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2713
2714 /* Unlock device */
2715 em28xx_set_mode(dev, EM28XX_SUSPEND);
2716 }
2717
2718 static int em28xx_hint_board(struct em28xx *dev)
2719 {
2720 int i;
2721
2722 if (dev->board.is_webcam) {
2723 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2724 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2725 } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
2726 dev->em28xx_sensor == EM28XX_MT9M111) {
2727 dev->model = EM2750_BOARD_UNKNOWN;
2728 }
2729 /* FIXME: IMPROVE ! */
2730
2731 return 0;
2732 }
2733
2734 /* HINT method: EEPROM
2735 *
2736 * This method works only for boards with eeprom.
2737 * Uses a hash of all eeprom bytes. The hash should be
2738 * unique for a vendor/tuner pair.
2739 * There are a high chance that tuners for different
2740 * video standards produce different hashes.
2741 */
2742 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2743 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2744 dev->model = em28xx_eeprom_hash[i].model;
2745 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2746
2747 em28xx_errdev("Your board has no unique USB ID.\n");
2748 em28xx_errdev("A hint were successfully done, "
2749 "based on eeprom hash.\n");
2750 em28xx_errdev("This method is not 100%% failproof.\n");
2751 em28xx_errdev("If the board were missdetected, "
2752 "please email this log to:\n");
2753 em28xx_errdev("\tV4L Mailing List "
2754 " <linux-media@vger.kernel.org>\n");
2755 em28xx_errdev("Board detected as %s\n",
2756 em28xx_boards[dev->model].name);
2757
2758 return 0;
2759 }
2760 }
2761
2762 /* HINT method: I2C attached devices
2763 *
2764 * This method works for all boards.
2765 * Uses a hash of i2c scanned devices.
2766 * Devices with the same i2c attached chips will
2767 * be considered equal.
2768 * This method is less precise than the eeprom one.
2769 */
2770
2771 /* user did not request i2c scanning => do it now */
2772 if (!dev->i2c_hash)
2773 em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
2774
2775 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2776 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2777 dev->model = em28xx_i2c_hash[i].model;
2778 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2779 em28xx_errdev("Your board has no unique USB ID.\n");
2780 em28xx_errdev("A hint were successfully done, "
2781 "based on i2c devicelist hash.\n");
2782 em28xx_errdev("This method is not 100%% failproof.\n");
2783 em28xx_errdev("If the board were missdetected, "
2784 "please email this log to:\n");
2785 em28xx_errdev("\tV4L Mailing List "
2786 " <linux-media@vger.kernel.org>\n");
2787 em28xx_errdev("Board detected as %s\n",
2788 em28xx_boards[dev->model].name);
2789
2790 return 0;
2791 }
2792 }
2793
2794 em28xx_errdev("Your board has no unique USB ID and thus need a "
2795 "hint to be detected.\n");
2796 em28xx_errdev("You may try to use card=<n> insmod option to "
2797 "workaround that.\n");
2798 em28xx_errdev("Please send an email with this log to:\n");
2799 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2800 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2801 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2802
2803 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2804 " insmod option:\n");
2805 for (i = 0; i < em28xx_bcount; i++) {
2806 em28xx_errdev(" card=%d -> %s\n",
2807 i, em28xx_boards[i].name);
2808 }
2809 return -1;
2810 }
2811
2812 static void em28xx_card_setup(struct em28xx *dev)
2813 {
2814 /*
2815 * If the device can be a webcam, seek for a sensor.
2816 * If sensor is not found, then it isn't a webcam.
2817 */
2818 if (dev->board.is_webcam) {
2819 if (em28xx_detect_sensor(dev) < 0)
2820 dev->board.is_webcam = 0;
2821 }
2822
2823 switch (dev->model) {
2824 case EM2750_BOARD_UNKNOWN:
2825 case EM2820_BOARD_UNKNOWN:
2826 case EM2800_BOARD_UNKNOWN:
2827 /*
2828 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2829 *
2830 * This occurs because they share identical USB vendor and
2831 * product IDs.
2832 *
2833 * What we do here is look up the EEPROM hash of the K-WORLD
2834 * and if it is found then we decide that we do not have
2835 * a DIGIVOX and reset the device to the K-WORLD instead.
2836 *
2837 * This solution is only valid if they do not share eeprom
2838 * hash identities which has not been determined as yet.
2839 */
2840 if (em28xx_hint_board(dev) < 0)
2841 em28xx_errdev("Board not discovered\n");
2842 else {
2843 em28xx_set_model(dev);
2844 em28xx_pre_card_setup(dev);
2845 }
2846 break;
2847 default:
2848 em28xx_set_model(dev);
2849 }
2850
2851 em28xx_info("Identified as %s (card=%d)\n",
2852 dev->board.name, dev->model);
2853
2854 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2855
2856 /* request some modules */
2857 switch (dev->model) {
2858 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2859 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2860 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2861 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2862 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2863 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
2864 {
2865 struct tveeprom tv;
2866
2867 if (dev->eedata == NULL)
2868 break;
2869 #if defined(CONFIG_MODULES) && defined(MODULE)
2870 request_module("tveeprom");
2871 #endif
2872 /* Call first TVeeprom */
2873
2874 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
2875 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
2876
2877 dev->tuner_type = tv.tuner_type;
2878
2879 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
2880 dev->i2s_speed = 2048000;
2881 dev->board.has_msp34xx = 1;
2882 }
2883 break;
2884 }
2885 case EM2882_BOARD_KWORLD_ATSC_315U:
2886 em28xx_write_reg(dev, 0x0d, 0x42);
2887 msleep(10);
2888 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2889 msleep(10);
2890 break;
2891 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2892 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2893 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
2894 break;
2895 case EM2820_BOARD_UNKNOWN:
2896 case EM2800_BOARD_UNKNOWN:
2897 /*
2898 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2899 *
2900 * This occurs because they share identical USB vendor and
2901 * product IDs.
2902 *
2903 * What we do here is look up the EEPROM hash of the K-WORLD
2904 * and if it is found then we decide that we do not have
2905 * a DIGIVOX and reset the device to the K-WORLD instead.
2906 *
2907 * This solution is only valid if they do not share eeprom
2908 * hash identities which has not been determined as yet.
2909 */
2910 case EM2880_BOARD_MSI_DIGIVOX_AD:
2911 if (!em28xx_hint_board(dev))
2912 em28xx_set_model(dev);
2913
2914 /* In cases where we had to use a board hint, the call to
2915 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2916 so make the call now so the analog GPIOs are set properly
2917 before probing the i2c bus. */
2918 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2919 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2920 break;
2921
2922 /*
2923 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2924 *
2925 * This occurs because they share identical USB vendor and
2926 * product IDs.
2927 *
2928 * What we do here is look up the EEPROM hash of the Dikom
2929 * and if it is found then we decide that we do not have
2930 * a Kworld and reset the device to the Dikom instead.
2931 *
2932 * This solution is only valid if they do not share eeprom
2933 * hash identities which has not been determined as yet.
2934 */
2935 case EM2882_BOARD_KWORLD_VS_DVBT:
2936 if (!em28xx_hint_board(dev))
2937 em28xx_set_model(dev);
2938
2939 /* In cases where we had to use a board hint, the call to
2940 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2941 so make the call now so the analog GPIOs are set properly
2942 before probing the i2c bus. */
2943 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2944 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2945 break;
2946 }
2947
2948 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2949 em28xx_errdev("\n\n");
2950 em28xx_errdev("The support for this board weren't "
2951 "valid yet.\n");
2952 em28xx_errdev("Please send a report of having this working\n");
2953 em28xx_errdev("not to V4L mailing list (and/or to other "
2954 "addresses)\n\n");
2955 }
2956
2957 /* Free eeprom data memory */
2958 kfree(dev->eedata);
2959 dev->eedata = NULL;
2960
2961 /* Allow override tuner type by a module parameter */
2962 if (tuner >= 0)
2963 dev->tuner_type = tuner;
2964 }
2965
2966 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2967 {
2968 memset(ctl, 0, sizeof(*ctl));
2969
2970 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2971 ctl->max_len = 64;
2972 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2973
2974 switch (dev->model) {
2975 case EM2880_BOARD_EMPIRE_DUAL_TV:
2976 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2977 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2978 ctl->demod = XC3028_FE_ZARLINK456;
2979 break;
2980 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2981 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2982 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2983 ctl->demod = XC3028_FE_ZARLINK456;
2984 break;
2985 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2986 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2987 ctl->demod = XC3028_FE_DEFAULT;
2988 break;
2989 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2990 ctl->demod = XC3028_FE_DEFAULT;
2991 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2992 break;
2993 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2994 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2995 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2996 /* FIXME: Better to specify the needed IF */
2997 ctl->demod = XC3028_FE_DEFAULT;
2998 break;
2999 case EM2883_BOARD_KWORLD_HYBRID_330U:
3000 case EM2882_BOARD_DIKOM_DK300:
3001 case EM2882_BOARD_KWORLD_VS_DVBT:
3002 ctl->demod = XC3028_FE_CHINA;
3003 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3004 break;
3005 case EM2882_BOARD_EVGA_INDTUBE:
3006 ctl->demod = XC3028_FE_CHINA;
3007 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3008 break;
3009 default:
3010 ctl->demod = XC3028_FE_OREN538;
3011 }
3012 }
3013 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
3014
3015 static void request_module_async(struct work_struct *work)
3016 {
3017 struct em28xx *dev = container_of(work,
3018 struct em28xx, request_module_wk);
3019
3020 /*
3021 * The em28xx extensions can be modules or builtin. If the
3022 * modules are already loaded or are built in, those extensions
3023 * can be initialised right now. Otherwise, the module init
3024 * code will do it.
3025 */
3026
3027 /*
3028 * Devicdes with an audio-only interface also have a V4L/DVB/RC
3029 * interface. Don't register extensions twice on those devices.
3030 */
3031 if (dev->is_audio_only) {
3032 #if defined(CONFIG_MODULES) && defined(MODULE)
3033 request_module("em28xx-alsa");
3034 #endif
3035 return;
3036 }
3037
3038 em28xx_init_extension(dev);
3039
3040 #if defined(CONFIG_MODULES) && defined(MODULE)
3041 if (dev->has_video)
3042 request_module("em28xx-v4l");
3043 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
3044 request_module("snd-usb-audio");
3045 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
3046 request_module("em28xx-alsa");
3047 if (dev->board.has_dvb)
3048 request_module("em28xx-dvb");
3049 if (dev->board.buttons ||
3050 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
3051 request_module("em28xx-rc");
3052 #endif /* CONFIG_MODULES */
3053 }
3054
3055 static void request_modules(struct em28xx *dev)
3056 {
3057 INIT_WORK(&dev->request_module_wk, request_module_async);
3058 schedule_work(&dev->request_module_wk);
3059 }
3060
3061 static void flush_request_modules(struct em28xx *dev)
3062 {
3063 flush_work(&dev->request_module_wk);
3064 }
3065
3066 static int em28xx_media_device_init(struct em28xx *dev,
3067 struct usb_device *udev)
3068 {
3069 #ifdef CONFIG_MEDIA_CONTROLLER
3070 struct media_device *mdev;
3071
3072 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
3073 if (!mdev)
3074 return -ENOMEM;
3075
3076 if (udev->product)
3077 media_device_usb_init(mdev, udev, udev->product);
3078 else if (udev->manufacturer)
3079 media_device_usb_init(mdev, udev, udev->manufacturer);
3080 else
3081 media_device_usb_init(mdev, udev, dev->name);
3082
3083 dev->media_dev = mdev;
3084 #endif
3085 return 0;
3086 }
3087
3088 static void em28xx_unregister_media_device(struct em28xx *dev)
3089 {
3090
3091 #ifdef CONFIG_MEDIA_CONTROLLER
3092 if (dev->media_dev) {
3093 media_device_unregister(dev->media_dev);
3094 media_device_cleanup(dev->media_dev);
3095 kfree(dev->media_dev);
3096 dev->media_dev = NULL;
3097 }
3098 #endif
3099 }
3100
3101 /*
3102 * em28xx_release_resources()
3103 * unregisters the v4l2,i2c and usb devices
3104 * called when the device gets disconnected or at module unload
3105 */
3106 static void em28xx_release_resources(struct em28xx *dev)
3107 {
3108 /*FIXME: I2C IR should be disconnected */
3109
3110 mutex_lock(&dev->lock);
3111
3112 em28xx_unregister_media_device(dev);
3113
3114 if (dev->def_i2c_bus)
3115 em28xx_i2c_unregister(dev, 1);
3116 em28xx_i2c_unregister(dev, 0);
3117
3118 usb_put_dev(dev->udev);
3119
3120 /* Mark device as unused */
3121 clear_bit(dev->devno, em28xx_devused);
3122
3123 mutex_unlock(&dev->lock);
3124 };
3125
3126 /**
3127 * em28xx_free_device() - Free em28xx device
3128 *
3129 * @ref: struct kref for em28xx device
3130 *
3131 * This is called when all extensions and em28xx core unregisters a device
3132 */
3133 void em28xx_free_device(struct kref *ref)
3134 {
3135 struct em28xx *dev = kref_to_dev(ref);
3136
3137 em28xx_info("Freeing device\n");
3138
3139 if (!dev->disconnected)
3140 em28xx_release_resources(dev);
3141
3142 kfree(dev->alt_max_pkt_size_isoc);
3143 kfree(dev);
3144 }
3145 EXPORT_SYMBOL_GPL(em28xx_free_device);
3146
3147 /*
3148 * em28xx_init_dev()
3149 * allocates and inits the device structs, registers i2c bus and v4l device
3150 */
3151 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
3152 struct usb_interface *interface,
3153 int minor)
3154 {
3155 int retval;
3156 static const char *default_chip_name = "em28xx";
3157 const char *chip_name = default_chip_name;
3158
3159 dev->udev = udev;
3160 mutex_init(&dev->ctrl_urb_lock);
3161 spin_lock_init(&dev->slock);
3162
3163 dev->em28xx_write_regs = em28xx_write_regs;
3164 dev->em28xx_read_reg = em28xx_read_reg;
3165 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
3166 dev->em28xx_write_regs_req = em28xx_write_regs_req;
3167 dev->em28xx_read_reg_req = em28xx_read_reg_req;
3168 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
3169
3170 em28xx_set_model(dev);
3171
3172 dev->wait_after_write = 5;
3173
3174 /* Based on the Chip ID, set the device configuration */
3175 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
3176 if (retval > 0) {
3177 dev->chip_id = retval;
3178
3179 switch (dev->chip_id) {
3180 case CHIP_ID_EM2800:
3181 chip_name = "em2800";
3182 break;
3183 case CHIP_ID_EM2710:
3184 chip_name = "em2710";
3185 break;
3186 case CHIP_ID_EM2750:
3187 chip_name = "em2750";
3188 break;
3189 case CHIP_ID_EM2765:
3190 chip_name = "em2765";
3191 dev->wait_after_write = 0;
3192 dev->is_em25xx = 1;
3193 dev->eeprom_addrwidth_16bit = 1;
3194 break;
3195 case CHIP_ID_EM2820:
3196 chip_name = "em2710/2820";
3197 if (le16_to_cpu(dev->udev->descriptor.idVendor)
3198 == 0xeb1a) {
3199 __le16 idProd = dev->udev->descriptor.idProduct;
3200
3201 if (le16_to_cpu(idProd) == 0x2710)
3202 chip_name = "em2710";
3203 else if (le16_to_cpu(idProd) == 0x2820)
3204 chip_name = "em2820";
3205 }
3206 /* NOTE: the em2820 is used in webcams, too ! */
3207 break;
3208 case CHIP_ID_EM2840:
3209 chip_name = "em2840";
3210 break;
3211 case CHIP_ID_EM2860:
3212 chip_name = "em2860";
3213 break;
3214 case CHIP_ID_EM2870:
3215 chip_name = "em2870";
3216 dev->wait_after_write = 0;
3217 break;
3218 case CHIP_ID_EM2874:
3219 chip_name = "em2874";
3220 dev->wait_after_write = 0;
3221 dev->eeprom_addrwidth_16bit = 1;
3222 break;
3223 case CHIP_ID_EM28174:
3224 chip_name = "em28174";
3225 dev->wait_after_write = 0;
3226 dev->eeprom_addrwidth_16bit = 1;
3227 break;
3228 case CHIP_ID_EM28178:
3229 chip_name = "em28178";
3230 dev->wait_after_write = 0;
3231 dev->eeprom_addrwidth_16bit = 1;
3232 break;
3233 case CHIP_ID_EM2883:
3234 chip_name = "em2882/3";
3235 dev->wait_after_write = 0;
3236 break;
3237 case CHIP_ID_EM2884:
3238 chip_name = "em2884";
3239 dev->wait_after_write = 0;
3240 dev->eeprom_addrwidth_16bit = 1;
3241 break;
3242 default:
3243 printk(KERN_INFO DRIVER_NAME
3244 ": unknown em28xx chip ID (%d)\n", dev->chip_id);
3245 }
3246 }
3247
3248 if (chip_name != default_chip_name)
3249 printk(KERN_INFO DRIVER_NAME
3250 ": chip ID is %s\n", chip_name);
3251
3252 /*
3253 * For em2820/em2710, the name may change latter, after checking
3254 * if the device has a sensor (so, it is em2710) or not.
3255 */
3256 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
3257
3258 em28xx_media_device_init(dev, udev);
3259
3260 if (dev->is_audio_only) {
3261 retval = em28xx_audio_setup(dev);
3262 if (retval)
3263 return -ENODEV;
3264 em28xx_init_extension(dev);
3265
3266 return 0;
3267 }
3268
3269 em28xx_pre_card_setup(dev);
3270
3271 if (!dev->board.is_em2800) {
3272 /* Resets I2C speed */
3273 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3274 if (retval < 0) {
3275 em28xx_errdev("%s: em28xx_write_reg failed!"
3276 " retval [%d]\n",
3277 __func__, retval);
3278 return retval;
3279 }
3280 }
3281
3282 rt_mutex_init(&dev->i2c_bus_lock);
3283
3284 /* register i2c bus 0 */
3285 if (dev->board.is_em2800)
3286 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
3287 else
3288 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
3289 if (retval < 0) {
3290 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
3291 __func__, retval);
3292 return retval;
3293 }
3294
3295 /* register i2c bus 1 */
3296 if (dev->def_i2c_bus) {
3297 if (dev->is_em25xx)
3298 retval = em28xx_i2c_register(dev, 1,
3299 EM28XX_I2C_ALGO_EM25XX_BUS_B);
3300 else
3301 retval = em28xx_i2c_register(dev, 1,
3302 EM28XX_I2C_ALGO_EM28XX);
3303 if (retval < 0) {
3304 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
3305 __func__, retval);
3306
3307 em28xx_i2c_unregister(dev, 0);
3308
3309 return retval;
3310 }
3311 }
3312
3313 /* Do board specific init and eeprom reading */
3314 em28xx_card_setup(dev);
3315
3316 return 0;
3317 }
3318
3319 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3320 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3321
3322 /*
3323 * em28xx_usb_probe()
3324 * checks for supported devices
3325 */
3326 static int em28xx_usb_probe(struct usb_interface *interface,
3327 const struct usb_device_id *id)
3328 {
3329 struct usb_device *udev;
3330 struct em28xx *dev = NULL;
3331 int retval;
3332 bool has_vendor_audio = false, has_video = false, has_dvb = false;
3333 int i, nr, try_bulk;
3334 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3335 char *speed;
3336
3337 udev = usb_get_dev(interface_to_usbdev(interface));
3338
3339 /* Check to see next free device and mark as used */
3340 do {
3341 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3342 if (nr >= EM28XX_MAXBOARDS) {
3343 /* No free device slots */
3344 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3345 EM28XX_MAXBOARDS);
3346 retval = -ENOMEM;
3347 goto err_no_slot;
3348 }
3349 } while (test_and_set_bit(nr, em28xx_devused));
3350
3351 /* Don't register audio interfaces */
3352 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3353 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3354 "interface %i, class %i\n",
3355 le16_to_cpu(udev->descriptor.idVendor),
3356 le16_to_cpu(udev->descriptor.idProduct),
3357 ifnum,
3358 interface->altsetting[0].desc.bInterfaceClass);
3359
3360 retval = -ENODEV;
3361 goto err;
3362 }
3363
3364 /* allocate memory for our device state and initialize it */
3365 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3366 if (dev == NULL) {
3367 em28xx_err(DRIVER_NAME ": out of memory!\n");
3368 retval = -ENOMEM;
3369 goto err;
3370 }
3371
3372 /* compute alternate max packet sizes */
3373 dev->alt_max_pkt_size_isoc =
3374 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) *
3375 interface->num_altsetting, GFP_KERNEL);
3376 if (dev->alt_max_pkt_size_isoc == NULL) {
3377 em28xx_errdev("out of memory!\n");
3378 kfree(dev);
3379 retval = -ENOMEM;
3380 goto err;
3381 }
3382
3383 /* Get endpoints */
3384 for (i = 0; i < interface->num_altsetting; i++) {
3385 int ep;
3386
3387 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3388 const struct usb_endpoint_descriptor *e;
3389 int sizedescr, size;
3390
3391 e = &interface->altsetting[i].endpoint[ep].desc;
3392
3393 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3394 size = sizedescr & 0x7ff;
3395
3396 if (udev->speed == USB_SPEED_HIGH)
3397 size = size * hb_mult(sizedescr);
3398
3399 if (usb_endpoint_dir_in(e)) {
3400 switch (e->bEndpointAddress) {
3401 case 0x82:
3402 has_video = true;
3403 if (usb_endpoint_xfer_isoc(e)) {
3404 dev->analog_ep_isoc =
3405 e->bEndpointAddress;
3406 dev->alt_max_pkt_size_isoc[i] = size;
3407 } else if (usb_endpoint_xfer_bulk(e)) {
3408 dev->analog_ep_bulk =
3409 e->bEndpointAddress;
3410 }
3411 break;
3412 case 0x83:
3413 if (usb_endpoint_xfer_isoc(e)) {
3414 has_vendor_audio = true;
3415 } else {
3416 printk(KERN_INFO DRIVER_NAME
3417 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
3418 }
3419 break;
3420 case 0x84:
3421 if (has_video &&
3422 (usb_endpoint_xfer_bulk(e))) {
3423 dev->analog_ep_bulk =
3424 e->bEndpointAddress;
3425 } else {
3426 if (usb_endpoint_xfer_isoc(e)) {
3427 if (size > dev->dvb_max_pkt_size_isoc) {
3428 has_dvb = true; /* see NOTE (~) */
3429 dev->dvb_ep_isoc = e->bEndpointAddress;
3430 dev->dvb_max_pkt_size_isoc = size;
3431 dev->dvb_alt_isoc = i;
3432 }
3433 } else {
3434 has_dvb = true;
3435 dev->dvb_ep_bulk = e->bEndpointAddress;
3436 }
3437 }
3438 break;
3439 }
3440 }
3441 /* NOTE:
3442 * Old logic with support for isoc transfers only was:
3443 * 0x82 isoc => analog
3444 * 0x83 isoc => audio
3445 * 0x84 isoc => digital
3446 *
3447 * New logic with support for bulk transfers
3448 * 0x82 isoc => analog
3449 * 0x82 bulk => analog
3450 * 0x83 isoc* => audio
3451 * 0x84 isoc => digital
3452 * 0x84 bulk => analog or digital**
3453 * (*: audio should always be isoc)
3454 * (**: analog, if ep 0x82 is isoc, otherwise digital)
3455 *
3456 * The new logic preserves backwards compatibility and
3457 * reflects the endpoint configurations we have seen
3458 * so far. But there might be devices for which this
3459 * logic is not sufficient...
3460 */
3461 /*
3462 * NOTE (~): some manufacturers (e.g. Terratec) disable
3463 * endpoints by setting wMaxPacketSize to 0 bytes for
3464 * all alt settings. So far, we've seen this for
3465 * DVB isoc endpoints only.
3466 */
3467 }
3468 }
3469
3470 if (!(has_vendor_audio || has_video || has_dvb)) {
3471 retval = -ENODEV;
3472 goto err_free;
3473 }
3474
3475 switch (udev->speed) {
3476 case USB_SPEED_LOW:
3477 speed = "1.5";
3478 break;
3479 case USB_SPEED_UNKNOWN:
3480 case USB_SPEED_FULL:
3481 speed = "12";
3482 break;
3483 case USB_SPEED_HIGH:
3484 speed = "480";
3485 break;
3486 default:
3487 speed = "unknown";
3488 }
3489
3490 printk(KERN_INFO DRIVER_NAME
3491 ": New device %s %s @ %s Mbps "
3492 "(%04x:%04x, interface %d, class %d)\n",
3493 udev->manufacturer ? udev->manufacturer : "",
3494 udev->product ? udev->product : "",
3495 speed,
3496 le16_to_cpu(udev->descriptor.idVendor),
3497 le16_to_cpu(udev->descriptor.idProduct),
3498 ifnum,
3499 interface->altsetting->desc.bInterfaceNumber);
3500
3501 /*
3502 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3503 * video stream wouldn't likely work, since 12 Mbps is generally
3504 * not enough even for most Digital TV streams.
3505 */
3506 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3507 printk(DRIVER_NAME ": Device initialization failed.\n");
3508 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3509 " USB 2.0 port.\n");
3510 retval = -ENODEV;
3511 goto err_free;
3512 }
3513
3514 dev->devno = nr;
3515 dev->model = id->driver_info;
3516 dev->alt = -1;
3517 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
3518 dev->has_video = has_video;
3519 dev->ifnum = ifnum;
3520
3521 if (has_vendor_audio) {
3522 printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n",
3523 ifnum, "(Vendor Class)");
3524 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
3525 }
3526 /* Checks if audio is provided by a USB Audio Class interface */
3527 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3528 struct usb_interface *uif = udev->config->interface[i];
3529
3530 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3531 if (has_vendor_audio)
3532 em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n"
3533 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
3534 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
3535 break;
3536 }
3537 }
3538
3539 if (has_video)
3540 printk(KERN_INFO DRIVER_NAME
3541 ": Video interface %i found:%s%s\n",
3542 ifnum,
3543 dev->analog_ep_bulk ? " bulk" : "",
3544 dev->analog_ep_isoc ? " isoc" : "");
3545 if (has_dvb)
3546 printk(KERN_INFO DRIVER_NAME
3547 ": DVB interface %i found:%s%s\n",
3548 ifnum,
3549 dev->dvb_ep_bulk ? " bulk" : "",
3550 dev->dvb_ep_isoc ? " isoc" : "");
3551
3552 dev->num_alt = interface->num_altsetting;
3553
3554 if ((unsigned)card[nr] < em28xx_bcount)
3555 dev->model = card[nr];
3556
3557 /* save our data pointer in this interface device */
3558 usb_set_intfdata(interface, dev);
3559
3560 /* allocate device struct and check if the device is a webcam */
3561 mutex_init(&dev->lock);
3562 retval = em28xx_init_dev(dev, udev, interface, nr);
3563 if (retval) {
3564 goto err_free;
3565 }
3566
3567 if (usb_xfer_mode < 0) {
3568 if (dev->board.is_webcam)
3569 try_bulk = 1;
3570 else
3571 try_bulk = 0;
3572 } else {
3573 try_bulk = usb_xfer_mode > 0;
3574 }
3575
3576 /* Disable V4L2 if the device doesn't have a decoder */
3577 if (has_video &&
3578 dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) {
3579 printk(DRIVER_NAME
3580 ": Currently, V4L2 is not supported on this model\n");
3581 has_video = false;
3582 dev->has_video = false;
3583 }
3584
3585 /* Select USB transfer types to use */
3586 if (has_video) {
3587 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
3588 dev->analog_xfer_bulk = 1;
3589 em28xx_info("analog set to %s mode.\n",
3590 dev->analog_xfer_bulk ? "bulk" : "isoc");
3591 }
3592 if (has_dvb) {
3593 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
3594 dev->dvb_xfer_bulk = 1;
3595 em28xx_info("dvb set to %s mode.\n",
3596 dev->dvb_xfer_bulk ? "bulk" : "isoc");
3597 }
3598
3599 kref_init(&dev->ref);
3600
3601 request_modules(dev);
3602
3603 /*
3604 * Do it at the end, to reduce dynamic configuration changes during
3605 * the device init. Yet, as request_modules() can be async, the
3606 * topology will likely change after the load of the em28xx subdrivers.
3607 */
3608 #ifdef CONFIG_MEDIA_CONTROLLER
3609 retval = media_device_register(dev->media_dev);
3610 #endif
3611
3612 return 0;
3613
3614 err_free:
3615 kfree(dev->alt_max_pkt_size_isoc);
3616 kfree(dev);
3617
3618 err:
3619 clear_bit(nr, em28xx_devused);
3620
3621 err_no_slot:
3622 usb_put_dev(udev);
3623 return retval;
3624 }
3625
3626 /*
3627 * em28xx_usb_disconnect()
3628 * called when the device gets disconnected
3629 * video device will be unregistered on v4l2_close in case it is still open
3630 */
3631 static void em28xx_usb_disconnect(struct usb_interface *interface)
3632 {
3633 struct em28xx *dev;
3634
3635 dev = usb_get_intfdata(interface);
3636 usb_set_intfdata(interface, NULL);
3637
3638 if (!dev)
3639 return;
3640
3641 dev->disconnected = 1;
3642
3643 em28xx_info("Disconnecting %s\n", dev->name);
3644
3645 flush_request_modules(dev);
3646
3647 em28xx_close_extension(dev);
3648
3649 em28xx_release_resources(dev);
3650 kref_put(&dev->ref, em28xx_free_device);
3651 }
3652
3653 static int em28xx_usb_suspend(struct usb_interface *interface,
3654 pm_message_t message)
3655 {
3656 struct em28xx *dev;
3657
3658 dev = usb_get_intfdata(interface);
3659 if (!dev)
3660 return 0;
3661 em28xx_suspend_extension(dev);
3662 return 0;
3663 }
3664
3665 static int em28xx_usb_resume(struct usb_interface *interface)
3666 {
3667 struct em28xx *dev;
3668
3669 dev = usb_get_intfdata(interface);
3670 if (!dev)
3671 return 0;
3672 em28xx_resume_extension(dev);
3673 return 0;
3674 }
3675
3676 static struct usb_driver em28xx_usb_driver = {
3677 .name = "em28xx",
3678 .probe = em28xx_usb_probe,
3679 .disconnect = em28xx_usb_disconnect,
3680 .suspend = em28xx_usb_suspend,
3681 .resume = em28xx_usb_resume,
3682 .reset_resume = em28xx_usb_resume,
3683 .id_table = em28xx_id_table,
3684 };
3685
3686 module_usb_driver(em28xx_usb_driver);
Linux with added FPC-III support