2 * Copyright 2012 Freescale Semiconductor, Inc.
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
12 #include <linux/module.h>
13 #include <linux/of_platform.h>
14 #include <linux/err.h>
16 #include <linux/delay.h>
18 #include "ci_hdrc_imx.h"
20 #define MX25_USB_PHY_CTRL_OFFSET 0x08
21 #define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23)
23 #define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
24 #define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0)
25 #define MX25_EHCI_INTERFACE_MASK (0xf)
27 #define MX25_OTG_SIC_SHIFT 29
28 #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
29 #define MX25_OTG_PM_BIT BIT(24)
30 #define MX25_OTG_PP_BIT BIT(11)
31 #define MX25_OTG_OCPOL_BIT BIT(3)
33 #define MX25_H1_SIC_SHIFT 21
34 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
35 #define MX25_H1_PP_BIT BIT(18)
36 #define MX25_H1_PM_BIT BIT(16)
37 #define MX25_H1_IPPUE_UP_BIT BIT(7)
38 #define MX25_H1_IPPUE_DOWN_BIT BIT(6)
39 #define MX25_H1_TLL_BIT BIT(5)
40 #define MX25_H1_USBTE_BIT BIT(4)
41 #define MX25_H1_OCPOL_BIT BIT(2)
43 #define MX27_H1_PM_BIT BIT(8)
44 #define MX27_H2_PM_BIT BIT(16)
45 #define MX27_OTG_PM_BIT BIT(24)
47 #define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08
48 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c
49 #define MX53_USB_UH2_CTRL_OFFSET 0x14
50 #define MX53_USB_UH3_CTRL_OFFSET 0x18
51 #define MX53_BM_OVER_CUR_DIS_H1 BIT(5)
52 #define MX53_BM_OVER_CUR_DIS_OTG BIT(8)
53 #define MX53_BM_OVER_CUR_DIS_UHx BIT(30)
54 #define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3
55 #define MX53_USB_PLL_DIV_24_MHZ 0x01
57 #define MX6_BM_NON_BURST_SETTING BIT(1)
58 #define MX6_BM_OVER_CUR_DIS BIT(7)
59 #define MX6_BM_OVER_CUR_POLARITY BIT(8)
60 #define MX6_BM_WAKEUP_ENABLE BIT(10)
61 #define MX6_BM_ID_WAKEUP BIT(16)
62 #define MX6_BM_VBUS_WAKEUP BIT(17)
63 #define MX6SX_BM_DPDM_WAKEUP_EN BIT(29)
64 #define MX6_BM_WAKEUP_INTR BIT(31)
65 #define MX6_USB_OTG1_PHY_CTRL 0x18
66 /* For imx6dql, it is host-only controller, for later imx6, it is otg's */
67 #define MX6_USB_OTG2_PHY_CTRL 0x1c
68 #define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8)
69 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
70 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
71 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
72 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
74 #define VF610_OVER_CUR_DIS BIT(7)
76 #define MX7D_USBNC_USB_CTRL2 0x4
77 #define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK 0x3
78 #define MX7D_USB_VBUS_WAKEUP_SOURCE(v) (v << 0)
79 #define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS MX7D_USB_VBUS_WAKEUP_SOURCE(0)
80 #define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1)
81 #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2)
82 #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3)
85 /* It's called once when probe a usb device */
86 int (*init
)(struct imx_usbmisc_data
*data
);
87 /* It's called once after adding a usb device */
88 int (*post
)(struct imx_usbmisc_data
*data
);
89 /* It's called when we need to enable/disable usb wakeup */
90 int (*set_wakeup
)(struct imx_usbmisc_data
*data
, bool enabled
);
96 const struct usbmisc_ops
*ops
;
99 static int usbmisc_imx25_init(struct imx_usbmisc_data
*data
)
101 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
108 spin_lock_irqsave(&usbmisc
->lock
, flags
);
109 switch (data
->index
) {
111 val
= readl(usbmisc
->base
);
112 val
&= ~(MX25_OTG_SIC_MASK
| MX25_OTG_PP_BIT
);
113 val
|= (MX25_EHCI_INTERFACE_DIFF_UNI
& MX25_EHCI_INTERFACE_MASK
) << MX25_OTG_SIC_SHIFT
;
114 val
|= (MX25_OTG_PM_BIT
| MX25_OTG_OCPOL_BIT
);
115 writel(val
, usbmisc
->base
);
118 val
= readl(usbmisc
->base
);
119 val
&= ~(MX25_H1_SIC_MASK
| MX25_H1_PP_BIT
| MX25_H1_IPPUE_UP_BIT
);
120 val
|= (MX25_EHCI_INTERFACE_SINGLE_UNI
& MX25_EHCI_INTERFACE_MASK
) << MX25_H1_SIC_SHIFT
;
121 val
|= (MX25_H1_PM_BIT
| MX25_H1_OCPOL_BIT
| MX25_H1_TLL_BIT
|
122 MX25_H1_USBTE_BIT
| MX25_H1_IPPUE_DOWN_BIT
);
124 writel(val
, usbmisc
->base
);
128 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
133 static int usbmisc_imx25_post(struct imx_usbmisc_data
*data
)
135 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
144 spin_lock_irqsave(&usbmisc
->lock
, flags
);
145 reg
= usbmisc
->base
+ MX25_USB_PHY_CTRL_OFFSET
;
147 writel(val
| MX25_BM_EXTERNAL_VBUS_DIVIDER
, reg
);
148 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
149 usleep_range(5000, 10000); /* needed to stabilize voltage */
155 static int usbmisc_imx27_init(struct imx_usbmisc_data
*data
)
157 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
161 switch (data
->index
) {
163 val
= MX27_OTG_PM_BIT
;
166 val
= MX27_H1_PM_BIT
;
169 val
= MX27_H2_PM_BIT
;
175 spin_lock_irqsave(&usbmisc
->lock
, flags
);
176 if (data
->disable_oc
)
177 val
= readl(usbmisc
->base
) | val
;
179 val
= readl(usbmisc
->base
) & ~val
;
180 writel(val
, usbmisc
->base
);
181 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
186 static int usbmisc_imx53_init(struct imx_usbmisc_data
*data
)
188 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
189 void __iomem
*reg
= NULL
;
196 /* Select a 24 MHz reference clock for the PHY */
197 val
= readl(usbmisc
->base
+ MX53_USB_OTG_PHY_CTRL_1_OFFSET
);
198 val
&= ~MX53_USB_PHYCTRL1_PLLDIV_MASK
;
199 val
|= MX53_USB_PLL_DIV_24_MHZ
;
200 writel(val
, usbmisc
->base
+ MX53_USB_OTG_PHY_CTRL_1_OFFSET
);
202 if (data
->disable_oc
) {
203 spin_lock_irqsave(&usbmisc
->lock
, flags
);
204 switch (data
->index
) {
206 reg
= usbmisc
->base
+ MX53_USB_OTG_PHY_CTRL_0_OFFSET
;
207 val
= readl(reg
) | MX53_BM_OVER_CUR_DIS_OTG
;
210 reg
= usbmisc
->base
+ MX53_USB_OTG_PHY_CTRL_0_OFFSET
;
211 val
= readl(reg
) | MX53_BM_OVER_CUR_DIS_H1
;
214 reg
= usbmisc
->base
+ MX53_USB_UH2_CTRL_OFFSET
;
215 val
= readl(reg
) | MX53_BM_OVER_CUR_DIS_UHx
;
218 reg
= usbmisc
->base
+ MX53_USB_UH3_CTRL_OFFSET
;
219 val
= readl(reg
) | MX53_BM_OVER_CUR_DIS_UHx
;
224 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
230 static int usbmisc_imx6q_set_wakeup
231 (struct imx_usbmisc_data
*data
, bool enabled
)
233 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
236 u32 wakeup_setting
= (MX6_BM_WAKEUP_ENABLE
|
237 MX6_BM_VBUS_WAKEUP
| MX6_BM_ID_WAKEUP
);
243 spin_lock_irqsave(&usbmisc
->lock
, flags
);
244 val
= readl(usbmisc
->base
+ data
->index
* 4);
246 val
|= wakeup_setting
;
247 writel(val
, usbmisc
->base
+ data
->index
* 4);
249 if (val
& MX6_BM_WAKEUP_INTR
)
250 pr_debug("wakeup int at ci_hdrc.%d\n", data
->index
);
251 val
&= ~wakeup_setting
;
252 writel(val
, usbmisc
->base
+ data
->index
* 4);
254 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
259 static int usbmisc_imx6q_init(struct imx_usbmisc_data
*data
)
261 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
268 spin_lock_irqsave(&usbmisc
->lock
, flags
);
270 reg
= readl(usbmisc
->base
+ data
->index
* 4);
271 if (data
->disable_oc
) {
272 reg
|= MX6_BM_OVER_CUR_DIS
;
273 } else if (data
->oc_polarity
== 1) {
275 reg
&= ~(MX6_BM_OVER_CUR_DIS
| MX6_BM_OVER_CUR_POLARITY
);
277 writel(reg
, usbmisc
->base
+ data
->index
* 4);
279 /* SoC non-burst setting */
280 reg
= readl(usbmisc
->base
+ data
->index
* 4);
281 writel(reg
| MX6_BM_NON_BURST_SETTING
,
282 usbmisc
->base
+ data
->index
* 4);
284 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
286 usbmisc_imx6q_set_wakeup(data
, false);
291 static int usbmisc_imx6sx_init(struct imx_usbmisc_data
*data
)
293 void __iomem
*reg
= NULL
;
295 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
298 usbmisc_imx6q_init(data
);
300 if (data
->index
== 0 || data
->index
== 1) {
301 reg
= usbmisc
->base
+ MX6_USB_OTG1_PHY_CTRL
+ data
->index
* 4;
302 spin_lock_irqsave(&usbmisc
->lock
, flags
);
303 /* Set vbus wakeup source as bvalid */
305 writel(val
| MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID
, reg
);
307 * Disable dp/dm wakeup in device mode when vbus is
310 val
= readl(usbmisc
->base
+ data
->index
* 4);
311 writel(val
& ~MX6SX_BM_DPDM_WAKEUP_EN
,
312 usbmisc
->base
+ data
->index
* 4);
313 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
319 static int usbmisc_vf610_init(struct imx_usbmisc_data
*data
)
321 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
325 * Vybrid only has one misc register set, but in two different
326 * areas. These is reflected in two instances of this driver.
328 if (data
->index
>= 1)
331 if (data
->disable_oc
) {
332 reg
= readl(usbmisc
->base
);
333 writel(reg
| VF610_OVER_CUR_DIS
, usbmisc
->base
);
339 static int usbmisc_imx7d_set_wakeup
340 (struct imx_usbmisc_data
*data
, bool enabled
)
342 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
345 u32 wakeup_setting
= (MX6_BM_WAKEUP_ENABLE
|
346 MX6_BM_VBUS_WAKEUP
| MX6_BM_ID_WAKEUP
);
348 spin_lock_irqsave(&usbmisc
->lock
, flags
);
349 val
= readl(usbmisc
->base
);
351 writel(val
| wakeup_setting
, usbmisc
->base
);
353 if (val
& MX6_BM_WAKEUP_INTR
)
354 dev_dbg(data
->dev
, "wakeup int\n");
355 writel(val
& ~wakeup_setting
, usbmisc
->base
);
357 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
362 static int usbmisc_imx7d_init(struct imx_usbmisc_data
*data
)
364 struct imx_usbmisc
*usbmisc
= dev_get_drvdata(data
->dev
);
368 if (data
->index
>= 1)
371 spin_lock_irqsave(&usbmisc
->lock
, flags
);
372 reg
= readl(usbmisc
->base
);
373 if (data
->disable_oc
) {
374 reg
|= MX6_BM_OVER_CUR_DIS
;
375 } else if (data
->oc_polarity
== 1) {
377 reg
&= ~(MX6_BM_OVER_CUR_DIS
| MX6_BM_OVER_CUR_POLARITY
);
379 writel(reg
, usbmisc
->base
);
381 reg
= readl(usbmisc
->base
+ MX7D_USBNC_USB_CTRL2
);
382 reg
&= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK
;
383 writel(reg
| MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
,
384 usbmisc
->base
+ MX7D_USBNC_USB_CTRL2
);
385 spin_unlock_irqrestore(&usbmisc
->lock
, flags
);
387 usbmisc_imx7d_set_wakeup(data
, false);
392 static const struct usbmisc_ops imx25_usbmisc_ops
= {
393 .init
= usbmisc_imx25_init
,
394 .post
= usbmisc_imx25_post
,
397 static const struct usbmisc_ops imx27_usbmisc_ops
= {
398 .init
= usbmisc_imx27_init
,
401 static const struct usbmisc_ops imx53_usbmisc_ops
= {
402 .init
= usbmisc_imx53_init
,
405 static const struct usbmisc_ops imx6q_usbmisc_ops
= {
406 .set_wakeup
= usbmisc_imx6q_set_wakeup
,
407 .init
= usbmisc_imx6q_init
,
410 static const struct usbmisc_ops vf610_usbmisc_ops
= {
411 .init
= usbmisc_vf610_init
,
414 static const struct usbmisc_ops imx6sx_usbmisc_ops
= {
415 .set_wakeup
= usbmisc_imx6q_set_wakeup
,
416 .init
= usbmisc_imx6sx_init
,
419 static const struct usbmisc_ops imx7d_usbmisc_ops
= {
420 .init
= usbmisc_imx7d_init
,
421 .set_wakeup
= usbmisc_imx7d_set_wakeup
,
424 int imx_usbmisc_init(struct imx_usbmisc_data
*data
)
426 struct imx_usbmisc
*usbmisc
;
431 usbmisc
= dev_get_drvdata(data
->dev
);
432 if (!usbmisc
->ops
->init
)
434 return usbmisc
->ops
->init(data
);
436 EXPORT_SYMBOL_GPL(imx_usbmisc_init
);
438 int imx_usbmisc_init_post(struct imx_usbmisc_data
*data
)
440 struct imx_usbmisc
*usbmisc
;
445 usbmisc
= dev_get_drvdata(data
->dev
);
446 if (!usbmisc
->ops
->post
)
448 return usbmisc
->ops
->post(data
);
450 EXPORT_SYMBOL_GPL(imx_usbmisc_init_post
);
452 int imx_usbmisc_set_wakeup(struct imx_usbmisc_data
*data
, bool enabled
)
454 struct imx_usbmisc
*usbmisc
;
459 usbmisc
= dev_get_drvdata(data
->dev
);
460 if (!usbmisc
->ops
->set_wakeup
)
462 return usbmisc
->ops
->set_wakeup(data
, enabled
);
464 EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup
);
466 static const struct of_device_id usbmisc_imx_dt_ids
[] = {
468 .compatible
= "fsl,imx25-usbmisc",
469 .data
= &imx25_usbmisc_ops
,
472 .compatible
= "fsl,imx35-usbmisc",
473 .data
= &imx25_usbmisc_ops
,
476 .compatible
= "fsl,imx27-usbmisc",
477 .data
= &imx27_usbmisc_ops
,
480 .compatible
= "fsl,imx51-usbmisc",
481 .data
= &imx53_usbmisc_ops
,
484 .compatible
= "fsl,imx53-usbmisc",
485 .data
= &imx53_usbmisc_ops
,
488 .compatible
= "fsl,imx6q-usbmisc",
489 .data
= &imx6q_usbmisc_ops
,
492 .compatible
= "fsl,vf610-usbmisc",
493 .data
= &vf610_usbmisc_ops
,
496 .compatible
= "fsl,imx6sx-usbmisc",
497 .data
= &imx6sx_usbmisc_ops
,
500 .compatible
= "fsl,imx6ul-usbmisc",
501 .data
= &imx6sx_usbmisc_ops
,
504 .compatible
= "fsl,imx7d-usbmisc",
505 .data
= &imx7d_usbmisc_ops
,
509 MODULE_DEVICE_TABLE(of
, usbmisc_imx_dt_ids
);
511 static int usbmisc_imx_probe(struct platform_device
*pdev
)
513 struct resource
*res
;
514 struct imx_usbmisc
*data
;
515 const struct of_device_id
*of_id
;
517 of_id
= of_match_device(usbmisc_imx_dt_ids
, &pdev
->dev
);
521 data
= devm_kzalloc(&pdev
->dev
, sizeof(*data
), GFP_KERNEL
);
525 spin_lock_init(&data
->lock
);
527 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
528 data
->base
= devm_ioremap_resource(&pdev
->dev
, res
);
529 if (IS_ERR(data
->base
))
530 return PTR_ERR(data
->base
);
532 data
->ops
= (const struct usbmisc_ops
*)of_id
->data
;
533 platform_set_drvdata(pdev
, data
);
538 static int usbmisc_imx_remove(struct platform_device
*pdev
)
543 static struct platform_driver usbmisc_imx_driver
= {
544 .probe
= usbmisc_imx_probe
,
545 .remove
= usbmisc_imx_remove
,
547 .name
= "usbmisc_imx",
548 .of_match_table
= usbmisc_imx_dt_ids
,
552 module_platform_driver(usbmisc_imx_driver
);
554 MODULE_ALIAS("platform:usbmisc-imx");
555 MODULE_LICENSE("GPL v2");
556 MODULE_DESCRIPTION("driver for imx usb non-core registers");
557 MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");