?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
inet: frag: enforce memory limits earlier
[linux/fpc-iii.git] / drivers / usb / serial / digi_acceleport.c
blob7ab3235febfc90d2b8df327b85c9b6f1f95f0818
1 /*
2 * Digi AccelePort USB-4 and USB-2 Serial Converters
3 *
4 * Copyright 2000 by Digi International
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
12 * usb-serial driver.
13 *
14 * Peter Berger (pberger@brimson.com)
15 * Al Borchers (borchers@steinerpoint.com)
16 */
17
18 #include <linux/kernel.h>
19 #include <linux/errno.h>
20 #include <linux/slab.h>
21 #include <linux/tty.h>
22 #include <linux/tty_driver.h>
23 #include <linux/tty_flip.h>
24 #include <linux/module.h>
25 #include <linux/spinlock.h>
26 #include <linux/workqueue.h>
27 #include <linux/uaccess.h>
28 #include <linux/usb.h>
29 #include <linux/wait.h>
30 #include <linux/usb/serial.h>
31
32 /* Defines */
33
34 #define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
35 #define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
36
37 /* port output buffer length -- must be <= transfer buffer length - 2 */
38 /* so we can be sure to send the full buffer in one urb */
39 #define DIGI_OUT_BUF_SIZE 8
40
41 /* port input buffer length -- must be >= transfer buffer length - 3 */
42 /* so we can be sure to hold at least one full buffer from one urb */
43 #define DIGI_IN_BUF_SIZE 64
44
45 /* retry timeout while sleeping */
46 #define DIGI_RETRY_TIMEOUT (HZ/10)
47
48 /* timeout while waiting for tty output to drain in close */
49 /* this delay is used twice in close, so the total delay could */
50 /* be twice this value */
51 #define DIGI_CLOSE_TIMEOUT (5*HZ)
52
53
54 /* AccelePort USB Defines */
55
56 /* ids */
57 #define DIGI_VENDOR_ID 0x05c5
58 #define DIGI_2_ID 0x0002 /* USB-2 */
59 #define DIGI_4_ID 0x0004 /* USB-4 */
60
61 /* commands
62 * "INB": can be used on the in-band endpoint
63 * "OOB": can be used on the out-of-band endpoint
64 */
65 #define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
66 #define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
67 #define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
68 #define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
69 #define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
70 #define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
71 #define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
72 #define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
73 #define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
74 #define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
75 #define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
76 #define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
77 #define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
78 #define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
79 #define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
80 #define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
81 #define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
82 #define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
83 #define DIGI_CMD_SEND_DATA 18 /* INB */
84 #define DIGI_CMD_RECEIVE_DATA 19 /* INB */
85 #define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
86 #define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
87
88 /* baud rates */
89 #define DIGI_BAUD_50 0
90 #define DIGI_BAUD_75 1
91 #define DIGI_BAUD_110 2
92 #define DIGI_BAUD_150 3
93 #define DIGI_BAUD_200 4
94 #define DIGI_BAUD_300 5
95 #define DIGI_BAUD_600 6
96 #define DIGI_BAUD_1200 7
97 #define DIGI_BAUD_1800 8
98 #define DIGI_BAUD_2400 9
99 #define DIGI_BAUD_4800 10
100 #define DIGI_BAUD_7200 11
101 #define DIGI_BAUD_9600 12
102 #define DIGI_BAUD_14400 13
103 #define DIGI_BAUD_19200 14
104 #define DIGI_BAUD_28800 15
105 #define DIGI_BAUD_38400 16
106 #define DIGI_BAUD_57600 17
107 #define DIGI_BAUD_76800 18
108 #define DIGI_BAUD_115200 19
109 #define DIGI_BAUD_153600 20
110 #define DIGI_BAUD_230400 21
111 #define DIGI_BAUD_460800 22
112
113 /* arguments */
114 #define DIGI_WORD_SIZE_5 0
115 #define DIGI_WORD_SIZE_6 1
116 #define DIGI_WORD_SIZE_7 2
117 #define DIGI_WORD_SIZE_8 3
118
119 #define DIGI_PARITY_NONE 0
120 #define DIGI_PARITY_ODD 1
121 #define DIGI_PARITY_EVEN 2
122 #define DIGI_PARITY_MARK 3
123 #define DIGI_PARITY_SPACE 4
124
125 #define DIGI_STOP_BITS_1 0
126 #define DIGI_STOP_BITS_2 1
127
128 #define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
129 #define DIGI_INPUT_FLOW_CONTROL_RTS 2
130 #define DIGI_INPUT_FLOW_CONTROL_DTR 4
131
132 #define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
133 #define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
134 #define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
135
136 #define DIGI_DTR_INACTIVE 0
137 #define DIGI_DTR_ACTIVE 1
138 #define DIGI_DTR_INPUT_FLOW_CONTROL 2
139
140 #define DIGI_RTS_INACTIVE 0
141 #define DIGI_RTS_ACTIVE 1
142 #define DIGI_RTS_INPUT_FLOW_CONTROL 2
143 #define DIGI_RTS_TOGGLE 3
144
145 #define DIGI_FLUSH_TX 1
146 #define DIGI_FLUSH_RX 2
147 #define DIGI_RESUME_TX 4 /* clears xoff condition */
148
149 #define DIGI_TRANSMIT_NOT_IDLE 0
150 #define DIGI_TRANSMIT_IDLE 1
151
152 #define DIGI_DISABLE 0
153 #define DIGI_ENABLE 1
154
155 #define DIGI_DEASSERT 0
156 #define DIGI_ASSERT 1
157
158 /* in band status codes */
159 #define DIGI_OVERRUN_ERROR 4
160 #define DIGI_PARITY_ERROR 8
161 #define DIGI_FRAMING_ERROR 16
162 #define DIGI_BREAK_ERROR 32
163
164 /* out of band status */
165 #define DIGI_NO_ERROR 0
166 #define DIGI_BAD_FIRST_PARAMETER 1
167 #define DIGI_BAD_SECOND_PARAMETER 2
168 #define DIGI_INVALID_LINE 3
169 #define DIGI_INVALID_OPCODE 4
170
171 /* input signals */
172 #define DIGI_READ_INPUT_SIGNALS_SLOT 1
173 #define DIGI_READ_INPUT_SIGNALS_ERR 2
174 #define DIGI_READ_INPUT_SIGNALS_BUSY 4
175 #define DIGI_READ_INPUT_SIGNALS_PE 8
176 #define DIGI_READ_INPUT_SIGNALS_CTS 16
177 #define DIGI_READ_INPUT_SIGNALS_DSR 32
178 #define DIGI_READ_INPUT_SIGNALS_RI 64
179 #define DIGI_READ_INPUT_SIGNALS_DCD 128
180
181
182 /* Structures */
183
184 struct digi_serial {
185 spinlock_t ds_serial_lock;
186 struct usb_serial_port *ds_oob_port; /* out-of-band port */
187 int ds_oob_port_num; /* index of out-of-band port */
188 int ds_device_started;
189 };
190
191 struct digi_port {
192 spinlock_t dp_port_lock;
193 int dp_port_num;
194 int dp_out_buf_len;
195 unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
196 int dp_write_urb_in_use;
197 unsigned int dp_modem_signals;
198 int dp_transmit_idle;
199 wait_queue_head_t dp_transmit_idle_wait;
200 int dp_throttled;
201 int dp_throttle_restart;
202 wait_queue_head_t dp_flush_wait;
203 wait_queue_head_t dp_close_wait; /* wait queue for close */
204 struct work_struct dp_wakeup_work;
205 struct usb_serial_port *dp_port;
206 };
207
208
209 /* Local Function Declarations */
210
211 static void digi_wakeup_write_lock(struct work_struct *work);
212 static int digi_write_oob_command(struct usb_serial_port *port,
213 unsigned char *buf, int count, int interruptible);
214 static int digi_write_inb_command(struct usb_serial_port *port,
215 unsigned char *buf, int count, unsigned long timeout);
216 static int digi_set_modem_signals(struct usb_serial_port *port,
217 unsigned int modem_signals, int interruptible);
218 static int digi_transmit_idle(struct usb_serial_port *port,
219 unsigned long timeout);
220 static void digi_rx_throttle(struct tty_struct *tty);
221 static void digi_rx_unthrottle(struct tty_struct *tty);
222 static void digi_set_termios(struct tty_struct *tty,
223 struct usb_serial_port *port, struct ktermios *old_termios);
224 static void digi_break_ctl(struct tty_struct *tty, int break_state);
225 static int digi_tiocmget(struct tty_struct *tty);
226 static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
227 unsigned int clear);
228 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
229 const unsigned char *buf, int count);
230 static void digi_write_bulk_callback(struct urb *urb);
231 static int digi_write_room(struct tty_struct *tty);
232 static int digi_chars_in_buffer(struct tty_struct *tty);
233 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
234 static void digi_close(struct usb_serial_port *port);
235 static void digi_dtr_rts(struct usb_serial_port *port, int on);
236 static int digi_startup_device(struct usb_serial *serial);
237 static int digi_startup(struct usb_serial *serial);
238 static void digi_disconnect(struct usb_serial *serial);
239 static void digi_release(struct usb_serial *serial);
240 static int digi_port_probe(struct usb_serial_port *port);
241 static int digi_port_remove(struct usb_serial_port *port);
242 static void digi_read_bulk_callback(struct urb *urb);
243 static int digi_read_inb_callback(struct urb *urb);
244 static int digi_read_oob_callback(struct urb *urb);
245
246
247 static const struct usb_device_id id_table_combined[] = {
248 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
249 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
250 { } /* Terminating entry */
251 };
252
253 static const struct usb_device_id id_table_2[] = {
254 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
255 { } /* Terminating entry */
256 };
257
258 static const struct usb_device_id id_table_4[] = {
259 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
260 { } /* Terminating entry */
261 };
262
263 MODULE_DEVICE_TABLE(usb, id_table_combined);
264
265 /* device info needed for the Digi serial converter */
266
267 static struct usb_serial_driver digi_acceleport_2_device = {
268 .driver = {
269 .owner = THIS_MODULE,
270 .name = "digi_2",
271 },
272 .description = "Digi 2 port USB adapter",
273 .id_table = id_table_2,
274 .num_ports = 3,
275 .open = digi_open,
276 .close = digi_close,
277 .dtr_rts = digi_dtr_rts,
278 .write = digi_write,
279 .write_room = digi_write_room,
280 .write_bulk_callback = digi_write_bulk_callback,
281 .read_bulk_callback = digi_read_bulk_callback,
282 .chars_in_buffer = digi_chars_in_buffer,
283 .throttle = digi_rx_throttle,
284 .unthrottle = digi_rx_unthrottle,
285 .set_termios = digi_set_termios,
286 .break_ctl = digi_break_ctl,
287 .tiocmget = digi_tiocmget,
288 .tiocmset = digi_tiocmset,
289 .attach = digi_startup,
290 .disconnect = digi_disconnect,
291 .release = digi_release,
292 .port_probe = digi_port_probe,
293 .port_remove = digi_port_remove,
294 };
295
296 static struct usb_serial_driver digi_acceleport_4_device = {
297 .driver = {
298 .owner = THIS_MODULE,
299 .name = "digi_4",
300 },
301 .description = "Digi 4 port USB adapter",
302 .id_table = id_table_4,
303 .num_ports = 4,
304 .open = digi_open,
305 .close = digi_close,
306 .write = digi_write,
307 .write_room = digi_write_room,
308 .write_bulk_callback = digi_write_bulk_callback,
309 .read_bulk_callback = digi_read_bulk_callback,
310 .chars_in_buffer = digi_chars_in_buffer,
311 .throttle = digi_rx_throttle,
312 .unthrottle = digi_rx_unthrottle,
313 .set_termios = digi_set_termios,
314 .break_ctl = digi_break_ctl,
315 .tiocmget = digi_tiocmget,
316 .tiocmset = digi_tiocmset,
317 .attach = digi_startup,
318 .disconnect = digi_disconnect,
319 .release = digi_release,
320 .port_probe = digi_port_probe,
321 .port_remove = digi_port_remove,
322 };
323
324 static struct usb_serial_driver * const serial_drivers[] = {
325 &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
326 };
327
328 /* Functions */
329
330 /*
331 * Cond Wait Interruptible Timeout Irqrestore
332 *
333 * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
334 * so that wake ups are not lost if they occur between the unlock
335 * and the sleep. In other words, spin_unlock_irqrestore and
336 * interruptible_sleep_on_timeout are "atomic" with respect to
337 * wake ups. This is used to implement condition variables.
338 *
339 * interruptible_sleep_on_timeout is deprecated and has been replaced
340 * with the equivalent code.
341 */
342
343 static long cond_wait_interruptible_timeout_irqrestore(
344 wait_queue_head_t *q, long timeout,
345 spinlock_t *lock, unsigned long flags)
346 __releases(lock)
347 {
348 DEFINE_WAIT(wait);
349
350 prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
351 spin_unlock_irqrestore(lock, flags);
352 timeout = schedule_timeout(timeout);
353 finish_wait(q, &wait);
354
355 return timeout;
356 }
357
358
359 /*
360 * Digi Wakeup Write
361 *
362 * Wake up port, line discipline, and tty processes sleeping
363 * on writes.
364 */
365
366 static void digi_wakeup_write_lock(struct work_struct *work)
367 {
368 struct digi_port *priv =
369 container_of(work, struct digi_port, dp_wakeup_work);
370 struct usb_serial_port *port = priv->dp_port;
371 unsigned long flags;
372
373 spin_lock_irqsave(&priv->dp_port_lock, flags);
374 tty_port_tty_wakeup(&port->port);
375 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
376 }
377
378 /*
379 * Digi Write OOB Command
380 *
381 * Write commands on the out of band port. Commands are 4
382 * bytes each, multiple commands can be sent at once, and
383 * no command will be split across USB packets. Returns 0
384 * if successful, -EINTR if interrupted while sleeping and
385 * the interruptible flag is true, or a negative error
386 * returned by usb_submit_urb.
387 */
388
389 static int digi_write_oob_command(struct usb_serial_port *port,
390 unsigned char *buf, int count, int interruptible)
391 {
392 int ret = 0;
393 int len;
394 struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
395 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
396 unsigned long flags = 0;
397
398 dev_dbg(&port->dev,
399 "digi_write_oob_command: TOP: port=%d, count=%d\n",
400 oob_priv->dp_port_num, count);
401
402 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
403 while (count > 0) {
404 while (oob_priv->dp_write_urb_in_use) {
405 cond_wait_interruptible_timeout_irqrestore(
406 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
407 &oob_priv->dp_port_lock, flags);
408 if (interruptible && signal_pending(current))
409 return -EINTR;
410 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
411 }
412
413 /* len must be a multiple of 4, so commands are not split */
414 len = min(count, oob_port->bulk_out_size);
415 if (len > 4)
416 len &= ~3;
417 memcpy(oob_port->write_urb->transfer_buffer, buf, len);
418 oob_port->write_urb->transfer_buffer_length = len;
419 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
420 if (ret == 0) {
421 oob_priv->dp_write_urb_in_use = 1;
422 count -= len;
423 buf += len;
424 }
425 }
426 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
427 if (ret)
428 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
429 __func__, ret);
430 return ret;
431
432 }
433
434
435 /*
436 * Digi Write In Band Command
437 *
438 * Write commands on the given port. Commands are 4
439 * bytes each, multiple commands can be sent at once, and
440 * no command will be split across USB packets. If timeout
441 * is non-zero, write in band command will return after
442 * waiting unsuccessfully for the URB status to clear for
443 * timeout ticks. Returns 0 if successful, or a negative
444 * error returned by digi_write.
445 */
446
447 static int digi_write_inb_command(struct usb_serial_port *port,
448 unsigned char *buf, int count, unsigned long timeout)
449 {
450 int ret = 0;
451 int len;
452 struct digi_port *priv = usb_get_serial_port_data(port);
453 unsigned char *data = port->write_urb->transfer_buffer;
454 unsigned long flags = 0;
455
456 dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
457 priv->dp_port_num, count);
458
459 if (timeout)
460 timeout += jiffies;
461 else
462 timeout = ULONG_MAX;
463
464 spin_lock_irqsave(&priv->dp_port_lock, flags);
465 while (count > 0 && ret == 0) {
466 while (priv->dp_write_urb_in_use &&
467 time_before(jiffies, timeout)) {
468 cond_wait_interruptible_timeout_irqrestore(
469 &port->write_wait, DIGI_RETRY_TIMEOUT,
470 &priv->dp_port_lock, flags);
471 if (signal_pending(current))
472 return -EINTR;
473 spin_lock_irqsave(&priv->dp_port_lock, flags);
474 }
475
476 /* len must be a multiple of 4 and small enough to */
477 /* guarantee the write will send buffered data first, */
478 /* so commands are in order with data and not split */
479 len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
480 if (len > 4)
481 len &= ~3;
482
483 /* write any buffered data first */
484 if (priv->dp_out_buf_len > 0) {
485 data[0] = DIGI_CMD_SEND_DATA;
486 data[1] = priv->dp_out_buf_len;
487 memcpy(data + 2, priv->dp_out_buf,
488 priv->dp_out_buf_len);
489 memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
490 port->write_urb->transfer_buffer_length
491 = priv->dp_out_buf_len + 2 + len;
492 } else {
493 memcpy(data, buf, len);
494 port->write_urb->transfer_buffer_length = len;
495 }
496
497 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
498 if (ret == 0) {
499 priv->dp_write_urb_in_use = 1;
500 priv->dp_out_buf_len = 0;
501 count -= len;
502 buf += len;
503 }
504
505 }
506 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
507
508 if (ret)
509 dev_err(&port->dev,
510 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
511 __func__, ret, priv->dp_port_num);
512 return ret;
513 }
514
515
516 /*
517 * Digi Set Modem Signals
518 *
519 * Sets or clears DTR and RTS on the port, according to the
520 * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
521 * for the modem_signals argument. Returns 0 if successful,
522 * -EINTR if interrupted while sleeping, or a non-zero error
523 * returned by usb_submit_urb.
524 */
525
526 static int digi_set_modem_signals(struct usb_serial_port *port,
527 unsigned int modem_signals, int interruptible)
528 {
529
530 int ret;
531 struct digi_port *port_priv = usb_get_serial_port_data(port);
532 struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
533 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
534 unsigned char *data = oob_port->write_urb->transfer_buffer;
535 unsigned long flags = 0;
536
537
538 dev_dbg(&port->dev,
539 "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
540 port_priv->dp_port_num, modem_signals);
541
542 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
543 spin_lock(&port_priv->dp_port_lock);
544
545 while (oob_priv->dp_write_urb_in_use) {
546 spin_unlock(&port_priv->dp_port_lock);
547 cond_wait_interruptible_timeout_irqrestore(
548 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
549 &oob_priv->dp_port_lock, flags);
550 if (interruptible && signal_pending(current))
551 return -EINTR;
552 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
553 spin_lock(&port_priv->dp_port_lock);
554 }
555 data[0] = DIGI_CMD_SET_DTR_SIGNAL;
556 data[1] = port_priv->dp_port_num;
557 data[2] = (modem_signals & TIOCM_DTR) ?
558 DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
559 data[3] = 0;
560 data[4] = DIGI_CMD_SET_RTS_SIGNAL;
561 data[5] = port_priv->dp_port_num;
562 data[6] = (modem_signals & TIOCM_RTS) ?
563 DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
564 data[7] = 0;
565
566 oob_port->write_urb->transfer_buffer_length = 8;
567
568 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
569 if (ret == 0) {
570 oob_priv->dp_write_urb_in_use = 1;
571 port_priv->dp_modem_signals =
572 (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
573 | (modem_signals&(TIOCM_DTR|TIOCM_RTS));
574 }
575 spin_unlock(&port_priv->dp_port_lock);
576 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
577 if (ret)
578 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
579 __func__, ret);
580 return ret;
581 }
582
583 /*
584 * Digi Transmit Idle
585 *
586 * Digi transmit idle waits, up to timeout ticks, for the transmitter
587 * to go idle. It returns 0 if successful or a negative error.
588 *
589 * There are race conditions here if more than one process is calling
590 * digi_transmit_idle on the same port at the same time. However, this
591 * is only called from close, and only one process can be in close on a
592 * port at a time, so its ok.
593 */
594
595 static int digi_transmit_idle(struct usb_serial_port *port,
596 unsigned long timeout)
597 {
598 int ret;
599 unsigned char buf[2];
600 struct digi_port *priv = usb_get_serial_port_data(port);
601 unsigned long flags = 0;
602
603 spin_lock_irqsave(&priv->dp_port_lock, flags);
604 priv->dp_transmit_idle = 0;
605 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
606
607 buf[0] = DIGI_CMD_TRANSMIT_IDLE;
608 buf[1] = 0;
609
610 timeout += jiffies;
611
612 ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
613 if (ret != 0)
614 return ret;
615
616 spin_lock_irqsave(&priv->dp_port_lock, flags);
617
618 while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
619 cond_wait_interruptible_timeout_irqrestore(
620 &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
621 &priv->dp_port_lock, flags);
622 if (signal_pending(current))
623 return -EINTR;
624 spin_lock_irqsave(&priv->dp_port_lock, flags);
625 }
626 priv->dp_transmit_idle = 0;
627 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
628 return 0;
629
630 }
631
632
633 static void digi_rx_throttle(struct tty_struct *tty)
634 {
635 unsigned long flags;
636 struct usb_serial_port *port = tty->driver_data;
637 struct digi_port *priv = usb_get_serial_port_data(port);
638
639 /* stop receiving characters by not resubmitting the read urb */
640 spin_lock_irqsave(&priv->dp_port_lock, flags);
641 priv->dp_throttled = 1;
642 priv->dp_throttle_restart = 0;
643 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
644 }
645
646
647 static void digi_rx_unthrottle(struct tty_struct *tty)
648 {
649 int ret = 0;
650 unsigned long flags;
651 struct usb_serial_port *port = tty->driver_data;
652 struct digi_port *priv = usb_get_serial_port_data(port);
653
654 spin_lock_irqsave(&priv->dp_port_lock, flags);
655
656 /* restart read chain */
657 if (priv->dp_throttle_restart)
658 ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
659
660 /* turn throttle off */
661 priv->dp_throttled = 0;
662 priv->dp_throttle_restart = 0;
663
664 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
665
666 if (ret)
667 dev_err(&port->dev,
668 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
669 __func__, ret, priv->dp_port_num);
670 }
671
672
673 static void digi_set_termios(struct tty_struct *tty,
674 struct usb_serial_port *port, struct ktermios *old_termios)
675 {
676 struct digi_port *priv = usb_get_serial_port_data(port);
677 struct device *dev = &port->dev;
678 unsigned int iflag = tty->termios.c_iflag;
679 unsigned int cflag = tty->termios.c_cflag;
680 unsigned int old_iflag = old_termios->c_iflag;
681 unsigned int old_cflag = old_termios->c_cflag;
682 unsigned char buf[32];
683 unsigned int modem_signals;
684 int arg, ret;
685 int i = 0;
686 speed_t baud;
687
688 dev_dbg(dev,
689 "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
690 priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
691
692 /* set baud rate */
693 baud = tty_get_baud_rate(tty);
694 if (baud != tty_termios_baud_rate(old_termios)) {
695 arg = -1;
696
697 /* reassert DTR and (maybe) RTS on transition from B0 */
698 if ((old_cflag & CBAUD) == B0) {
699 /* don't set RTS if using hardware flow control */
700 /* and throttling input */
701 modem_signals = TIOCM_DTR;
702 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
703 modem_signals |= TIOCM_RTS;
704 digi_set_modem_signals(port, modem_signals, 1);
705 }
706 switch (baud) {
707 /* drop DTR and RTS on transition to B0 */
708 case 0: digi_set_modem_signals(port, 0, 1); break;
709 case 50: arg = DIGI_BAUD_50; break;
710 case 75: arg = DIGI_BAUD_75; break;
711 case 110: arg = DIGI_BAUD_110; break;
712 case 150: arg = DIGI_BAUD_150; break;
713 case 200: arg = DIGI_BAUD_200; break;
714 case 300: arg = DIGI_BAUD_300; break;
715 case 600: arg = DIGI_BAUD_600; break;
716 case 1200: arg = DIGI_BAUD_1200; break;
717 case 1800: arg = DIGI_BAUD_1800; break;
718 case 2400: arg = DIGI_BAUD_2400; break;
719 case 4800: arg = DIGI_BAUD_4800; break;
720 case 9600: arg = DIGI_BAUD_9600; break;
721 case 19200: arg = DIGI_BAUD_19200; break;
722 case 38400: arg = DIGI_BAUD_38400; break;
723 case 57600: arg = DIGI_BAUD_57600; break;
724 case 115200: arg = DIGI_BAUD_115200; break;
725 case 230400: arg = DIGI_BAUD_230400; break;
726 case 460800: arg = DIGI_BAUD_460800; break;
727 default:
728 arg = DIGI_BAUD_9600;
729 baud = 9600;
730 break;
731 }
732 if (arg != -1) {
733 buf[i++] = DIGI_CMD_SET_BAUD_RATE;
734 buf[i++] = priv->dp_port_num;
735 buf[i++] = arg;
736 buf[i++] = 0;
737 }
738 }
739 /* set parity */
740 tty->termios.c_cflag &= ~CMSPAR;
741
742 if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
743 if (cflag&PARENB) {
744 if (cflag&PARODD)
745 arg = DIGI_PARITY_ODD;
746 else
747 arg = DIGI_PARITY_EVEN;
748 } else {
749 arg = DIGI_PARITY_NONE;
750 }
751 buf[i++] = DIGI_CMD_SET_PARITY;
752 buf[i++] = priv->dp_port_num;
753 buf[i++] = arg;
754 buf[i++] = 0;
755 }
756 /* set word size */
757 if ((cflag&CSIZE) != (old_cflag&CSIZE)) {
758 arg = -1;
759 switch (cflag&CSIZE) {
760 case CS5: arg = DIGI_WORD_SIZE_5; break;
761 case CS6: arg = DIGI_WORD_SIZE_6; break;
762 case CS7: arg = DIGI_WORD_SIZE_7; break;
763 case CS8: arg = DIGI_WORD_SIZE_8; break;
764 default:
765 dev_dbg(dev,
766 "digi_set_termios: can't handle word size %d\n",
767 (cflag&CSIZE));
768 break;
769 }
770
771 if (arg != -1) {
772 buf[i++] = DIGI_CMD_SET_WORD_SIZE;
773 buf[i++] = priv->dp_port_num;
774 buf[i++] = arg;
775 buf[i++] = 0;
776 }
777
778 }
779
780 /* set stop bits */
781 if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) {
782
783 if ((cflag&CSTOPB))
784 arg = DIGI_STOP_BITS_2;
785 else
786 arg = DIGI_STOP_BITS_1;
787
788 buf[i++] = DIGI_CMD_SET_STOP_BITS;
789 buf[i++] = priv->dp_port_num;
790 buf[i++] = arg;
791 buf[i++] = 0;
792
793 }
794
795 /* set input flow control */
796 if ((iflag&IXOFF) != (old_iflag&IXOFF)
797 || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
798 arg = 0;
799 if (iflag&IXOFF)
800 arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
801 else
802 arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
803
804 if (cflag&CRTSCTS) {
805 arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
806
807 /* On USB-4 it is necessary to assert RTS prior */
808 /* to selecting RTS input flow control. */
809 buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
810 buf[i++] = priv->dp_port_num;
811 buf[i++] = DIGI_RTS_ACTIVE;
812 buf[i++] = 0;
813
814 } else {
815 arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
816 }
817 buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
818 buf[i++] = priv->dp_port_num;
819 buf[i++] = arg;
820 buf[i++] = 0;
821 }
822
823 /* set output flow control */
824 if ((iflag & IXON) != (old_iflag & IXON)
825 || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
826 arg = 0;
827 if (iflag & IXON)
828 arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
829 else
830 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
831
832 if (cflag & CRTSCTS) {
833 arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
834 } else {
835 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
836 }
837
838 buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
839 buf[i++] = priv->dp_port_num;
840 buf[i++] = arg;
841 buf[i++] = 0;
842 }
843
844 /* set receive enable/disable */
845 if ((cflag & CREAD) != (old_cflag & CREAD)) {
846 if (cflag & CREAD)
847 arg = DIGI_ENABLE;
848 else
849 arg = DIGI_DISABLE;
850
851 buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
852 buf[i++] = priv->dp_port_num;
853 buf[i++] = arg;
854 buf[i++] = 0;
855 }
856 ret = digi_write_oob_command(port, buf, i, 1);
857 if (ret != 0)
858 dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
859 tty_encode_baud_rate(tty, baud, baud);
860 }
861
862
863 static void digi_break_ctl(struct tty_struct *tty, int break_state)
864 {
865 struct usb_serial_port *port = tty->driver_data;
866 unsigned char buf[4];
867
868 buf[0] = DIGI_CMD_BREAK_CONTROL;
869 buf[1] = 2; /* length */
870 buf[2] = break_state ? 1 : 0;
871 buf[3] = 0; /* pad */
872 digi_write_inb_command(port, buf, 4, 0);
873 }
874
875
876 static int digi_tiocmget(struct tty_struct *tty)
877 {
878 struct usb_serial_port *port = tty->driver_data;
879 struct digi_port *priv = usb_get_serial_port_data(port);
880 unsigned int val;
881 unsigned long flags;
882
883 spin_lock_irqsave(&priv->dp_port_lock, flags);
884 val = priv->dp_modem_signals;
885 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
886 return val;
887 }
888
889
890 static int digi_tiocmset(struct tty_struct *tty,
891 unsigned int set, unsigned int clear)
892 {
893 struct usb_serial_port *port = tty->driver_data;
894 struct digi_port *priv = usb_get_serial_port_data(port);
895 unsigned int val;
896 unsigned long flags;
897
898 spin_lock_irqsave(&priv->dp_port_lock, flags);
899 val = (priv->dp_modem_signals & ~clear) | set;
900 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
901 return digi_set_modem_signals(port, val, 1);
902 }
903
904
905 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
906 const unsigned char *buf, int count)
907 {
908
909 int ret, data_len, new_len;
910 struct digi_port *priv = usb_get_serial_port_data(port);
911 unsigned char *data = port->write_urb->transfer_buffer;
912 unsigned long flags = 0;
913
914 dev_dbg(&port->dev,
915 "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
916 priv->dp_port_num, count, in_interrupt());
917
918 /* copy user data (which can sleep) before getting spin lock */
919 count = min(count, port->bulk_out_size-2);
920 count = min(64, count);
921
922 /* be sure only one write proceeds at a time */
923 /* there are races on the port private buffer */
924 spin_lock_irqsave(&priv->dp_port_lock, flags);
925
926 /* wait for urb status clear to submit another urb */
927 if (priv->dp_write_urb_in_use) {
928 /* buffer data if count is 1 (probably put_char) if possible */
929 if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
930 priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
931 new_len = 1;
932 } else {
933 new_len = 0;
934 }
935 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
936 return new_len;
937 }
938
939 /* allow space for any buffered data and for new data, up to */
940 /* transfer buffer size - 2 (for command and length bytes) */
941 new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
942 data_len = new_len + priv->dp_out_buf_len;
943
944 if (data_len == 0) {
945 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
946 return 0;
947 }
948
949 port->write_urb->transfer_buffer_length = data_len+2;
950
951 *data++ = DIGI_CMD_SEND_DATA;
952 *data++ = data_len;
953
954 /* copy in buffered data first */
955 memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
956 data += priv->dp_out_buf_len;
957
958 /* copy in new data */
959 memcpy(data, buf, new_len);
960
961 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
962 if (ret == 0) {
963 priv->dp_write_urb_in_use = 1;
964 ret = new_len;
965 priv->dp_out_buf_len = 0;
966 }
967
968 /* return length of new data written, or error */
969 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
970 if (ret < 0)
971 dev_err_console(port,
972 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
973 __func__, ret, priv->dp_port_num);
974 dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
975 return ret;
976
977 }
978
979 static void digi_write_bulk_callback(struct urb *urb)
980 {
981
982 struct usb_serial_port *port = urb->context;
983 struct usb_serial *serial;
984 struct digi_port *priv;
985 struct digi_serial *serial_priv;
986 int ret = 0;
987 int status = urb->status;
988
989 /* port and serial sanity check */
990 if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
991 pr_err("%s: port or port->private is NULL, status=%d\n",
992 __func__, status);
993 return;
994 }
995 serial = port->serial;
996 if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
997 dev_err(&port->dev,
998 "%s: serial or serial->private is NULL, status=%d\n",
999 __func__, status);
1000 return;
1001 }
1002
1003 /* handle oob callback */
1004 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1005 dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
1006 spin_lock(&priv->dp_port_lock);
1007 priv->dp_write_urb_in_use = 0;
1008 wake_up_interruptible(&port->write_wait);
1009 spin_unlock(&priv->dp_port_lock);
1010 return;
1011 }
1012
1013 /* try to send any buffered data on this port */
1014 spin_lock(&priv->dp_port_lock);
1015 priv->dp_write_urb_in_use = 0;
1016 if (priv->dp_out_buf_len > 0) {
1017 *((unsigned char *)(port->write_urb->transfer_buffer))
1018 = (unsigned char)DIGI_CMD_SEND_DATA;
1019 *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
1020 = (unsigned char)priv->dp_out_buf_len;
1021 port->write_urb->transfer_buffer_length =
1022 priv->dp_out_buf_len + 2;
1023 memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
1024 priv->dp_out_buf_len);
1025 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1026 if (ret == 0) {
1027 priv->dp_write_urb_in_use = 1;
1028 priv->dp_out_buf_len = 0;
1029 }
1030 }
1031 /* wake up processes sleeping on writes immediately */
1032 tty_port_tty_wakeup(&port->port);
1033 /* also queue up a wakeup at scheduler time, in case we */
1034 /* lost the race in write_chan(). */
1035 schedule_work(&priv->dp_wakeup_work);
1036
1037 spin_unlock(&priv->dp_port_lock);
1038 if (ret && ret != -EPERM)
1039 dev_err_console(port,
1040 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1041 __func__, ret, priv->dp_port_num);
1042 }
1043
1044 static int digi_write_room(struct tty_struct *tty)
1045 {
1046 struct usb_serial_port *port = tty->driver_data;
1047 struct digi_port *priv = usb_get_serial_port_data(port);
1048 int room;
1049 unsigned long flags = 0;
1050
1051 spin_lock_irqsave(&priv->dp_port_lock, flags);
1052
1053 if (priv->dp_write_urb_in_use)
1054 room = 0;
1055 else
1056 room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
1057
1058 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1059 dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room);
1060 return room;
1061
1062 }
1063
1064 static int digi_chars_in_buffer(struct tty_struct *tty)
1065 {
1066 struct usb_serial_port *port = tty->driver_data;
1067 struct digi_port *priv = usb_get_serial_port_data(port);
1068
1069 if (priv->dp_write_urb_in_use) {
1070 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1071 priv->dp_port_num, port->bulk_out_size - 2);
1072 /* return(port->bulk_out_size - 2); */
1073 return 256;
1074 } else {
1075 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1076 priv->dp_port_num, priv->dp_out_buf_len);
1077 return priv->dp_out_buf_len;
1078 }
1079
1080 }
1081
1082 static void digi_dtr_rts(struct usb_serial_port *port, int on)
1083 {
1084 /* Adjust DTR and RTS */
1085 digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
1086 }
1087
1088 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
1089 {
1090 int ret;
1091 unsigned char buf[32];
1092 struct digi_port *priv = usb_get_serial_port_data(port);
1093 struct ktermios not_termios;
1094
1095 /* be sure the device is started up */
1096 if (digi_startup_device(port->serial) != 0)
1097 return -ENXIO;
1098
1099 /* read modem signals automatically whenever they change */
1100 buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
1101 buf[1] = priv->dp_port_num;
1102 buf[2] = DIGI_ENABLE;
1103 buf[3] = 0;
1104
1105 /* flush fifos */
1106 buf[4] = DIGI_CMD_IFLUSH_FIFO;
1107 buf[5] = priv->dp_port_num;
1108 buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1109 buf[7] = 0;
1110
1111 ret = digi_write_oob_command(port, buf, 8, 1);
1112 if (ret != 0)
1113 dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
1114
1115 /* set termios settings */
1116 if (tty) {
1117 not_termios.c_cflag = ~tty->termios.c_cflag;
1118 not_termios.c_iflag = ~tty->termios.c_iflag;
1119 digi_set_termios(tty, port, &not_termios);
1120 }
1121 return 0;
1122 }
1123
1124
1125 static void digi_close(struct usb_serial_port *port)
1126 {
1127 DEFINE_WAIT(wait);
1128 int ret;
1129 unsigned char buf[32];
1130 struct digi_port *priv = usb_get_serial_port_data(port);
1131
1132 mutex_lock(&port->serial->disc_mutex);
1133 /* if disconnected, just clear flags */
1134 if (port->serial->disconnected)
1135 goto exit;
1136
1137 /* FIXME: Transmit idle belongs in the wait_unti_sent path */
1138 digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
1139
1140 /* disable input flow control */
1141 buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
1142 buf[1] = priv->dp_port_num;
1143 buf[2] = DIGI_DISABLE;
1144 buf[3] = 0;
1145
1146 /* disable output flow control */
1147 buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
1148 buf[5] = priv->dp_port_num;
1149 buf[6] = DIGI_DISABLE;
1150 buf[7] = 0;
1151
1152 /* disable reading modem signals automatically */
1153 buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
1154 buf[9] = priv->dp_port_num;
1155 buf[10] = DIGI_DISABLE;
1156 buf[11] = 0;
1157
1158 /* disable receive */
1159 buf[12] = DIGI_CMD_RECEIVE_ENABLE;
1160 buf[13] = priv->dp_port_num;
1161 buf[14] = DIGI_DISABLE;
1162 buf[15] = 0;
1163
1164 /* flush fifos */
1165 buf[16] = DIGI_CMD_IFLUSH_FIFO;
1166 buf[17] = priv->dp_port_num;
1167 buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1168 buf[19] = 0;
1169
1170 ret = digi_write_oob_command(port, buf, 20, 0);
1171 if (ret != 0)
1172 dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
1173 ret);
1174 /* wait for final commands on oob port to complete */
1175 prepare_to_wait(&priv->dp_flush_wait, &wait,
1176 TASK_INTERRUPTIBLE);
1177 schedule_timeout(DIGI_CLOSE_TIMEOUT);
1178 finish_wait(&priv->dp_flush_wait, &wait);
1179
1180 /* shutdown any outstanding bulk writes */
1181 usb_kill_urb(port->write_urb);
1182 exit:
1183 spin_lock_irq(&priv->dp_port_lock);
1184 priv->dp_write_urb_in_use = 0;
1185 wake_up_interruptible(&priv->dp_close_wait);
1186 spin_unlock_irq(&priv->dp_port_lock);
1187 mutex_unlock(&port->serial->disc_mutex);
1188 }
1189
1190
1191 /*
1192 * Digi Startup Device
1193 *
1194 * Starts reads on all ports. Must be called AFTER startup, with
1195 * urbs initialized. Returns 0 if successful, non-zero error otherwise.
1196 */
1197
1198 static int digi_startup_device(struct usb_serial *serial)
1199 {
1200 int i, ret = 0;
1201 struct digi_serial *serial_priv = usb_get_serial_data(serial);
1202 struct usb_serial_port *port;
1203
1204 /* be sure this happens exactly once */
1205 spin_lock(&serial_priv->ds_serial_lock);
1206 if (serial_priv->ds_device_started) {
1207 spin_unlock(&serial_priv->ds_serial_lock);
1208 return 0;
1209 }
1210 serial_priv->ds_device_started = 1;
1211 spin_unlock(&serial_priv->ds_serial_lock);
1212
1213 /* start reading from each bulk in endpoint for the device */
1214 /* set USB_DISABLE_SPD flag for write bulk urbs */
1215 for (i = 0; i < serial->type->num_ports + 1; i++) {
1216 port = serial->port[i];
1217 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
1218 if (ret != 0) {
1219 dev_err(&port->dev,
1220 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1221 __func__, ret, i);
1222 break;
1223 }
1224 }
1225 return ret;
1226 }
1227
1228 static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
1229 {
1230 struct digi_port *priv;
1231
1232 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1233 if (!priv)
1234 return -ENOMEM;
1235
1236 spin_lock_init(&priv->dp_port_lock);
1237 priv->dp_port_num = port_num;
1238 init_waitqueue_head(&priv->dp_transmit_idle_wait);
1239 init_waitqueue_head(&priv->dp_flush_wait);
1240 init_waitqueue_head(&priv->dp_close_wait);
1241 INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
1242 priv->dp_port = port;
1243
1244 init_waitqueue_head(&port->write_wait);
1245
1246 usb_set_serial_port_data(port, priv);
1247
1248 return 0;
1249 }
1250
1251 static int digi_startup(struct usb_serial *serial)
1252 {
1253 struct device *dev = &serial->interface->dev;
1254 struct digi_serial *serial_priv;
1255 int ret;
1256 int i;
1257
1258 /* check whether the device has the expected number of endpoints */
1259 if (serial->num_port_pointers < serial->type->num_ports + 1) {
1260 dev_err(dev, "OOB endpoints missing\n");
1261 return -ENODEV;
1262 }
1263
1264 for (i = 0; i < serial->type->num_ports + 1 ; i++) {
1265 if (!serial->port[i]->read_urb) {
1266 dev_err(dev, "bulk-in endpoint missing\n");
1267 return -ENODEV;
1268 }
1269 if (!serial->port[i]->write_urb) {
1270 dev_err(dev, "bulk-out endpoint missing\n");
1271 return -ENODEV;
1272 }
1273 }
1274
1275 serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
1276 if (!serial_priv)
1277 return -ENOMEM;
1278
1279 spin_lock_init(&serial_priv->ds_serial_lock);
1280 serial_priv->ds_oob_port_num = serial->type->num_ports;
1281 serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
1282
1283 ret = digi_port_init(serial_priv->ds_oob_port,
1284 serial_priv->ds_oob_port_num);
1285 if (ret) {
1286 kfree(serial_priv);
1287 return ret;
1288 }
1289
1290 usb_set_serial_data(serial, serial_priv);
1291
1292 return 0;
1293 }
1294
1295
1296 static void digi_disconnect(struct usb_serial *serial)
1297 {
1298 int i;
1299
1300 /* stop reads and writes on all ports */
1301 for (i = 0; i < serial->type->num_ports + 1; i++) {
1302 usb_kill_urb(serial->port[i]->read_urb);
1303 usb_kill_urb(serial->port[i]->write_urb);
1304 }
1305 }
1306
1307
1308 static void digi_release(struct usb_serial *serial)
1309 {
1310 struct digi_serial *serial_priv;
1311 struct digi_port *priv;
1312
1313 serial_priv = usb_get_serial_data(serial);
1314
1315 priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
1316 kfree(priv);
1317
1318 kfree(serial_priv);
1319 }
1320
1321 static int digi_port_probe(struct usb_serial_port *port)
1322 {
1323 return digi_port_init(port, port->port_number);
1324 }
1325
1326 static int digi_port_remove(struct usb_serial_port *port)
1327 {
1328 struct digi_port *priv;
1329
1330 priv = usb_get_serial_port_data(port);
1331 kfree(priv);
1332
1333 return 0;
1334 }
1335
1336 static void digi_read_bulk_callback(struct urb *urb)
1337 {
1338 struct usb_serial_port *port = urb->context;
1339 struct digi_port *priv;
1340 struct digi_serial *serial_priv;
1341 int ret;
1342 int status = urb->status;
1343
1344 /* port sanity check, do not resubmit if port is not valid */
1345 if (port == NULL)
1346 return;
1347 priv = usb_get_serial_port_data(port);
1348 if (priv == NULL) {
1349 dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
1350 __func__, status);
1351 return;
1352 }
1353 if (port->serial == NULL ||
1354 (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
1355 dev_err(&port->dev, "%s: serial is bad or serial->private "
1356 "is NULL, status=%d\n", __func__, status);
1357 return;
1358 }
1359
1360 /* do not resubmit urb if it has any status error */
1361 if (status) {
1362 dev_err(&port->dev,
1363 "%s: nonzero read bulk status: status=%d, port=%d\n",
1364 __func__, status, priv->dp_port_num);
1365 return;
1366 }
1367
1368 /* handle oob or inb callback, do not resubmit if error */
1369 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1370 if (digi_read_oob_callback(urb) != 0)
1371 return;
1372 } else {
1373 if (digi_read_inb_callback(urb) != 0)
1374 return;
1375 }
1376
1377 /* continue read */
1378 ret = usb_submit_urb(urb, GFP_ATOMIC);
1379 if (ret != 0 && ret != -EPERM) {
1380 dev_err(&port->dev,
1381 "%s: failed resubmitting urb, ret=%d, port=%d\n",
1382 __func__, ret, priv->dp_port_num);
1383 }
1384
1385 }
1386
1387 /*
1388 * Digi Read INB Callback
1389 *
1390 * Digi Read INB Callback handles reads on the in band ports, sending
1391 * the data on to the tty subsystem. When called we know port and
1392 * port->private are not NULL and port->serial has been validated.
1393 * It returns 0 if successful, 1 if successful but the port is
1394 * throttled, and -1 if the sanity checks failed.
1395 */
1396
1397 static int digi_read_inb_callback(struct urb *urb)
1398 {
1399 struct usb_serial_port *port = urb->context;
1400 struct digi_port *priv = usb_get_serial_port_data(port);
1401 unsigned char *buf = urb->transfer_buffer;
1402 int opcode;
1403 int len;
1404 int port_status;
1405 unsigned char *data;
1406 int flag, throttled;
1407
1408 /* short/multiple packet check */
1409 if (urb->actual_length < 2) {
1410 dev_warn(&port->dev, "short packet received\n");
1411 return -1;
1412 }
1413
1414 opcode = buf[0];
1415 len = buf[1];
1416
1417 if (urb->actual_length != len + 2) {
1418 dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
1419 priv->dp_port_num, opcode, len, urb->actual_length);
1420 return -1;
1421 }
1422
1423 if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
1424 dev_err(&port->dev, "malformed data packet received\n");
1425 return -1;
1426 }
1427
1428 spin_lock(&priv->dp_port_lock);
1429
1430 /* check for throttle; if set, do not resubmit read urb */
1431 /* indicate the read chain needs to be restarted on unthrottle */
1432 throttled = priv->dp_throttled;
1433 if (throttled)
1434 priv->dp_throttle_restart = 1;
1435
1436 /* receive data */
1437 if (opcode == DIGI_CMD_RECEIVE_DATA) {
1438 port_status = buf[2];
1439 data = &buf[3];
1440
1441 /* get flag from port_status */
1442 flag = 0;
1443
1444 /* overrun is special, not associated with a char */
1445 if (port_status & DIGI_OVERRUN_ERROR)
1446 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1447
1448 /* break takes precedence over parity, */
1449 /* which takes precedence over framing errors */
1450 if (port_status & DIGI_BREAK_ERROR)
1451 flag = TTY_BREAK;
1452 else if (port_status & DIGI_PARITY_ERROR)
1453 flag = TTY_PARITY;
1454 else if (port_status & DIGI_FRAMING_ERROR)
1455 flag = TTY_FRAME;
1456
1457 /* data length is len-1 (one byte of len is port_status) */
1458 --len;
1459 if (len > 0) {
1460 tty_insert_flip_string_fixed_flag(&port->port, data,
1461 flag, len);
1462 tty_flip_buffer_push(&port->port);
1463 }
1464 }
1465 spin_unlock(&priv->dp_port_lock);
1466
1467 if (opcode == DIGI_CMD_RECEIVE_DISABLE)
1468 dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
1469 else if (opcode != DIGI_CMD_RECEIVE_DATA)
1470 dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
1471
1472 return throttled ? 1 : 0;
1473
1474 }
1475
1476
1477 /*
1478 * Digi Read OOB Callback
1479 *
1480 * Digi Read OOB Callback handles reads on the out of band port.
1481 * When called we know port and port->private are not NULL and
1482 * the port->serial is valid. It returns 0 if successful, and
1483 * -1 if the sanity checks failed.
1484 */
1485
1486 static int digi_read_oob_callback(struct urb *urb)
1487 {
1488
1489 struct usb_serial_port *port = urb->context;
1490 struct usb_serial *serial = port->serial;
1491 struct tty_struct *tty;
1492 struct digi_port *priv = usb_get_serial_port_data(port);
1493 unsigned char *buf = urb->transfer_buffer;
1494 int opcode, line, status, val;
1495 int i;
1496 unsigned int rts;
1497
1498 if (urb->actual_length < 4)
1499 return -1;
1500
1501 /* handle each oob command */
1502 for (i = 0; i < urb->actual_length - 3; i += 4) {
1503 opcode = buf[i];
1504 line = buf[i + 1];
1505 status = buf[i + 2];
1506 val = buf[i + 3];
1507
1508 dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
1509 opcode, line, status, val);
1510
1511 if (status != 0 || line >= serial->type->num_ports)
1512 continue;
1513
1514 port = serial->port[line];
1515
1516 priv = usb_get_serial_port_data(port);
1517 if (priv == NULL)
1518 return -1;
1519
1520 tty = tty_port_tty_get(&port->port);
1521
1522 rts = 0;
1523 if (tty)
1524 rts = C_CRTSCTS(tty);
1525
1526 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
1527 spin_lock(&priv->dp_port_lock);
1528 /* convert from digi flags to termiox flags */
1529 if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
1530 priv->dp_modem_signals |= TIOCM_CTS;
1531 /* port must be open to use tty struct */
1532 if (rts)
1533 tty_port_tty_wakeup(&port->port);
1534 } else {
1535 priv->dp_modem_signals &= ~TIOCM_CTS;
1536 /* port must be open to use tty struct */
1537 }
1538 if (val & DIGI_READ_INPUT_SIGNALS_DSR)
1539 priv->dp_modem_signals |= TIOCM_DSR;
1540 else
1541 priv->dp_modem_signals &= ~TIOCM_DSR;
1542 if (val & DIGI_READ_INPUT_SIGNALS_RI)
1543 priv->dp_modem_signals |= TIOCM_RI;
1544 else
1545 priv->dp_modem_signals &= ~TIOCM_RI;
1546 if (val & DIGI_READ_INPUT_SIGNALS_DCD)
1547 priv->dp_modem_signals |= TIOCM_CD;
1548 else
1549 priv->dp_modem_signals &= ~TIOCM_CD;
1550
1551 spin_unlock(&priv->dp_port_lock);
1552 } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
1553 spin_lock(&priv->dp_port_lock);
1554 priv->dp_transmit_idle = 1;
1555 wake_up_interruptible(&priv->dp_transmit_idle_wait);
1556 spin_unlock(&priv->dp_port_lock);
1557 } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
1558 wake_up_interruptible(&priv->dp_flush_wait);
1559 }
1560 tty_kref_put(tty);
1561 }
1562 return 0;
1563
1564 }
1565
1566 module_usb_serial_driver(serial_drivers, id_table_combined);
1567
1568 MODULE_AUTHOR(DRIVER_AUTHOR);
1569 MODULE_DESCRIPTION(DRIVER_DESC);
1570 MODULE_LICENSE("GPL");
Linux with added FPC-III support