2 * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
13 * This file is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use,
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
43 #include "imx6dl.dtsi"
44 #include "imx6qdl-tx6.dtsi"
47 model = "Ka-Ro electronics TX6S-8034 Module";
48 compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
59 backlight: backlight {
60 compatible = "pwm-backlight";
61 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_lcd0_pwr>;
64 enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
65 power-supply = <®_lcd1_pwr>;
67 * a poor man's way to create a 1:1 relationship between
68 * the PWM value and the actual duty cycle
70 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
71 10 11 12 13 14 15 16 17 18 19
72 20 21 22 23 24 25 26 27 28 29
73 30 31 32 33 34 35 36 37 38 39
74 40 41 42 43 44 45 46 47 48 49
75 50 51 52 53 54 55 56 57 58 59
76 60 61 62 63 64 65 66 67 68 69
77 70 71 72 73 74 75 76 77 78 79
78 80 81 82 83 84 85 86 87 88 89
79 90 91 92 93 94 95 96 97 98 99
81 default-brightness-level = <50>;
84 display: display@di0 {
85 compatible = "fsl,imx-parallel-display";
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_disp0_2>;
88 interface-pix-fmt = "rgb24";
92 display0_in: endpoint {
93 remote-endpoint = <&ipu1_di0_disp0>;
101 clock-frequency = <25200000>;
113 pixelclk-active = <0>;
117 clock-frequency = <25200000>;
129 pixelclk-active = <0>;
133 clock-frequency = <6413760>;
145 pixelclk-active = <0>;
149 clock-frequency = <9009000>;
161 pixelclk-active = <1>;
165 clock-frequency = <33264000>;
177 pixelclk-active = <0>;
180 ET0700 { /* same as ET0500 */
181 clock-frequency = <33264000>;
193 pixelclk-active = <0>;
197 clock-frequency = <6596040>;
209 pixelclk-active = <0>;
221 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1
222 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1
223 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1
224 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1
225 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1
226 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1
227 MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
232 remote-endpoint = <&display0_in>;