arch/arm/boot/dts/imx6qdl-gw553x.dtsi

   1 /*
   2  * Copyright 2016 Gateworks Corporation
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include <dt-bindings/gpio/gpio.h>
  49
  50 / {
  51         /* these are used by bootloader for disabling nodes */
  52         aliases {
  53                 led0 = &led0;
  54                 led1 = &led1;
  55                 nand = &gpmi;
  56                 usb0 = &usbh1;
  57                 usb1 = &usbotg;
  58         };
  59
  60         chosen {
  61                 stdout-path = &uart2;
  62         };
  63
  64         leds {
  65                 compatible = "gpio-leds";
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&pinctrl_gpio_leds>;
  68
  69                 led0: user1 {
  70                         label = "user1";
  71                         gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  72                         default-state = "on";
  73                         linux,default-trigger = "heartbeat";
  74                 };
  75
  76                 led1: user2 {
  77                         label = "user2";
  78                         gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  79                         default-state = "off";
  80                 };
  81         };
  82
  83         memory {
  84                 reg = <0x10000000 0x20000000>;
  85         };
  86
  87         pps {
  88                 compatible = "pps-gpio";
  89                 pinctrl-names = "default";
  90                 pinctrl-0 = <&pinctrl_pps>;
  91                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  92                 status = "okay";
  93         };
  94
  95         reg_5p0v: regulator-5p0v {
  96                 compatible = "regulator-fixed";
  97                 regulator-name = "5P0V";
  98                 regulator-min-microvolt = <5000000>;
  99                 regulator-max-microvolt = <5000000>;
 100                 regulator-always-on;
 101         };
 102
 103         reg_usb_otg_vbus: regulator-usb-otg-vbus {
 104                 compatible = "regulator-fixed";
 105                 regulator-name = "usb_otg_vbus";
 106                 regulator-min-microvolt = <5000000>;
 107                 regulator-max-microvolt = <5000000>;
 108                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 109                 enable-active-high;
 110         };
 111 };
 112
 113 &gpmi {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pinctrl_gpmi_nand>;
 116         status = "okay";
 117 };
 118
 119 &hdmi {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&pinctrl_hdmi>;
 122         ddc-i2c-bus = <&i2c3>;
 123         status = "okay";
 124 };
 125
 126 &i2c1 {
 127         clock-frequency = <100000>;
 128         pinctrl-names = "default";
 129         pinctrl-0 = <&pinctrl_i2c1>;
 130         status = "okay";
 131
 132         gpio: pca9555@23 {
 133                 compatible = "nxp,pca9555";
 134                 reg = <0x23>;
 135                 gpio-controller;
 136                 #gpio-cells = <2>;
 137         };
 138
 139         eeprom1: eeprom@50 {
 140                 compatible = "atmel,24c02";
 141                 reg = <0x50>;
 142                 pagesize = <16>;
 143         };
 144
 145         eeprom2: eeprom@51 {
 146                 compatible = "atmel,24c02";
 147                 reg = <0x51>;
 148                 pagesize = <16>;
 149         };
 150
 151         eeprom3: eeprom@52 {
 152                 compatible = "atmel,24c02";
 153                 reg = <0x52>;
 154                 pagesize = <16>;
 155         };
 156
 157         eeprom4: eeprom@53 {
 158                 compatible = "atmel,24c02";
 159                 reg = <0x53>;
 160                 pagesize = <16>;
 161         };
 162
 163         rtc: ds1672@68 {
 164                 compatible = "dallas,ds1672";
 165                 reg = <0x68>;
 166         };
 167 };
 168
 169 &i2c2 {
 170         clock-frequency = <100000>;
 171         pinctrl-names = "default";
 172         pinctrl-0 = <&pinctrl_i2c2>;
 173         status = "okay";
 174
 175         ltc3676: pmic@3c {
 176                 compatible = "lltc,ltc3676";
 177                 reg = <0x3c>;
 178                 pinctrl-names = "default";
 179                 pinctrl-0 = <&pinctrl_pmic>;
 180                 interrupt-parent = <&gpio1>;
 181                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 182
 183                 regulators {
 184                         /* VDD_SOC (1+R1/R2 = 1.635) */
 185                         reg_vdd_soc: sw1 {
 186                                 regulator-name = "vddsoc";
 187                                 regulator-min-microvolt = <674400>;
 188                                 regulator-max-microvolt = <1308000>;
 189                                 lltc,fb-voltage-divider = <127000 200000>;
 190                                 regulator-ramp-delay = <7000>;
 191                                 regulator-boot-on;
 192                                 regulator-always-on;
 193                         };
 194
 195                         /* VDD_DDR (1+R1/R2 = 2.105) */
 196                         reg_vdd_ddr: sw2 {
 197                                 regulator-name = "vddddr";
 198                                 regulator-min-microvolt = <868310>;
 199                                 regulator-max-microvolt = <1684000>;
 200                                 lltc,fb-voltage-divider = <221000 200000>;
 201                                 regulator-ramp-delay = <7000>;
 202                                 regulator-boot-on;
 203                                 regulator-always-on;
 204                         };
 205
 206                         /* VDD_ARM (1+R1/R2 = 1.635) */
 207                         reg_vdd_arm: sw3 {
 208                                 regulator-name = "vddarm";
 209                                 regulator-min-microvolt = <674400>;
 210                                 regulator-max-microvolt = <1308000>;
 211                                 lltc,fb-voltage-divider = <127000 200000>;
 212                                 regulator-ramp-delay = <7000>;
 213                                 regulator-boot-on;
 214                                 regulator-always-on;
 215                         };
 216
 217                         /* VDD_3P3 (1+R1/R2 = 1.281) */
 218                         reg_3p3v: sw4 {
 219                                 regulator-name = "vdd3p3";
 220                                 regulator-min-microvolt = <1880000>;
 221                                 regulator-max-microvolt = <3647000>;
 222                                 lltc,fb-voltage-divider = <200000 56200>;
 223                                 regulator-ramp-delay = <7000>;
 224                                 regulator-boot-on;
 225                                 regulator-always-on;
 226                         };
 227
 228                         /* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
 229                         reg_1p8a: ldo2 {
 230                                 regulator-name = "vdd1p8a";
 231                                 regulator-min-microvolt = <1816125>;
 232                                 regulator-max-microvolt = <1816125>;
 233                                 lltc,fb-voltage-divider = <301000 200000>;
 234                                 regulator-boot-on;
 235                                 regulator-always-on;
 236                         };
 237
 238                         /* VDD_1P8b: microSD VDD_1P8 */
 239                         reg_1p8b: ldo3 {
 240                                 regulator-name = "vdd1p8b";
 241                                 regulator-min-microvolt = <1800000>;
 242                                 regulator-max-microvolt = <1800000>;
 243                                 regulator-boot-on;
 244                         };
 245
 246                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 247                         reg_3p0v: ldo4 {
 248                                 regulator-name = "vdd3p0";
 249                                 regulator-min-microvolt = <3023250>;
 250                                 regulator-max-microvolt = <3023250>;
 251                                 lltc,fb-voltage-divider = <634000 200000>;
 252                                 regulator-boot-on;
 253                                 regulator-always-on;
 254                         };
 255                 };
 256         };
 257 };
 258
 259 &i2c3 {
 260         clock-frequency = <100000>;
 261         pinctrl-names = "default";
 262         pinctrl-0 = <&pinctrl_i2c3>;
 263         status = "okay";
 264
 265         adv7180: camera@20 {
 266                 compatible = "adi,adv7180";
 267                 pinctrl-names = "default";
 268                 pinctrl-0 = <&pinctrl_adv7180>;
 269                 reg = <0x20>;
 270                 powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
 271                 interrupt-parent = <&gpio5>;
 272                 interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
 273
 274                 port {
 275                         adv7180_to_ipu1_csi0_mux: endpoint {
 276                                 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
 277                                 bus-width = <8>;
 278                         };
 279                 };
 280         };
 281 };
 282
 283 &ipu1_csi0_from_ipu1_csi0_mux {
 284         bus-width = <8>;
 285 };
 286
 287 &ipu1_csi0_mux_from_parallel_sensor {
 288         remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
 289         bus-width = <8>;
 290 };
 291
 292 &ipu1_csi0 {
 293         pinctrl-names = "default";
 294         pinctrl-0 = <&pinctrl_ipu1_csi0>;
 295 };
 296
 297 &pcie {
 298         pinctrl-names = "default";
 299         pinctrl-0 = <&pinctrl_pcie>;
 300         reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
 301         status = "okay";
 302 };
 303
 304 &pwm2 {
 305         pinctrl-names = "default";
 306         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 307         status = "disabled";
 308 };
 309
 310 &pwm3 {
 311         pinctrl-names = "default";
 312         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 313         status = "disabled";
 314 };
 315
 316 &pwm4 {
 317         pinctrl-names = "default";
 318         pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
 319         status = "disabled";
 320 };
 321
 322 &uart2 {
 323         pinctrl-names = "default";
 324         pinctrl-0 = <&pinctrl_uart2>;
 325         status = "okay";
 326 };
 327
 328 &uart3 {
 329         pinctrl-names = "default";
 330         pinctrl-0 = <&pinctrl_uart3>;
 331         status = "okay";
 332 };
 333
 334 &uart4 {
 335         pinctrl-names = "default";
 336         pinctrl-0 = <&pinctrl_uart4>;
 337         status = "okay";
 338 };
 339
 340 &uart5 {
 341         pinctrl-names = "default";
 342         pinctrl-0 = <&pinctrl_uart5>;
 343         status = "okay";
 344 };
 345
 346 &usbh1 {
 347         status = "okay";
 348 };
 349
 350 &usbotg {
 351         vbus-supply = <&reg_usb_otg_vbus>;
 352         pinctrl-names = "default";
 353         pinctrl-0 = <&pinctrl_usbotg>;
 354         disable-over-current;
 355         status = "okay";
 356 };
 357
 358 &usdhc3 {
 359         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 360         pinctrl-0 = <&pinctrl_usdhc3>;
 361         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 362         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 363         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 364         status = "okay";
 365 };
 366
 367 &wdog1 {
 368         pinctrl-names = "default";
 369         pinctrl-0 = <&pinctrl_wdog>;
 370         fsl,ext-reset-output;
 371 };
 372
 373 &iomuxc {
 374         pinctrl_adv7180: adv7180grp {
 375                 fsl,pins = <
 376                         MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
 377                         MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
 378                 >;
 379         };
 380
 381         pinctrl_gpmi_nand: gpminandgrp {
 382                 fsl,pins = <
 383                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 384                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 385                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 386                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 387                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 388                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 389                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 390                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 391                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 392                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 393                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 394                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 395                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 396                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 397                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 398                 >;
 399         };
 400
 401         pinctrl_hdmi: hdmigrp {
 402                 fsl,pins = <
 403                         MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE    0x1f8b0
 404                 >;
 405         };
 406
 407         pinctrl_i2c1: i2c1grp {
 408                 fsl,pins = <
 409                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 410                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 411                 >;
 412         };
 413
 414         pinctrl_i2c2: i2c2grp {
 415                 fsl,pins = <
 416                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 417                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 418                 >;
 419         };
 420
 421         pinctrl_i2c3: i2c3grp {
 422                 fsl,pins = <
 423                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 424                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 425                 >;
 426         };
 427
 428         pinctrl_ipu1_csi0: ipu1csi0grp {
 429                 fsl,pins = <
 430                         MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
 431                         MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
 432                         MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
 433                         MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
 434                         MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
 435                         MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
 436                         MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
 437                         MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
 438                         MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
 439                         MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
 440                         MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
 441                 >;
 442         };
 443
 444         pinctrl_gpio_leds: gpioledsgrp {
 445                 fsl,pins = <
 446                         MX6QDL_PAD_KEY_COL2__GPIO4_IO10         0x1b0b0
 447                         MX6QDL_PAD_KEY_ROW2__GPIO4_IO11         0x1b0b0
 448                 >;
 449         };
 450
 451         pinctrl_pcie: pciegrp {
 452                 fsl,pins = <
 453                         MX6QDL_PAD_GPIO_0__GPIO1_IO00           0x1b0b0
 454                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x4001b0b0 /* PCIESKT_WDIS# */
 455                 >;
 456         };
 457
 458         pinctrl_pmic: pmicgrp {
 459                 fsl,pins = <
 460                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 461                 >;
 462         };
 463
 464         pinctrl_pps: ppsgrp {
 465                 fsl,pins = <
 466                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 467                 >;
 468         };
 469
 470         pinctrl_pwm2: pwm2grp {
 471                 fsl,pins = <
 472                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 473                 >;
 474         };
 475
 476         pinctrl_pwm3: pwm3grp {
 477                 fsl,pins = <
 478                         MX6QDL_PAD_SD4_DAT1__PWM3_OUT           0x1b0b1
 479                 >;
 480         };
 481
 482         pinctrl_pwm4: pwm4grp {
 483                 fsl,pins = <
 484                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 485                 >;
 486         };
 487
 488         pinctrl_uart2: uart2grp {
 489                 fsl,pins = <
 490                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 491                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 492                 >;
 493         };
 494
 495         pinctrl_uart3: uart3grp {
 496                 fsl,pins = <
 497                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 498                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 499                 >;
 500         };
 501
 502         pinctrl_uart4: uart4grp {
 503                 fsl,pins = <
 504                         MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 505                         MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 506                 >;
 507         };
 508
 509         pinctrl_uart5: uart5grp {
 510                 fsl,pins = <
 511                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 512                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 513                 >;
 514         };
 515
 516         pinctrl_usbotg: usbotggrp {
 517                 fsl,pins = <
 518                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 519                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* OTG_PWR_EN */
 520                 >;
 521         };
 522
 523         pinctrl_usdhc3: usdhc3grp {
 524                 fsl,pins = <
 525                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 526                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 527                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 528                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 529                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 530                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 531                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 532                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 533                 >;
 534         };
 535
 536         pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 537                 fsl,pins = <
 538                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 539                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 540                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 541                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 542                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 543                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 544                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 545                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 546                 >;
 547         };
 548
 549         pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 550                 fsl,pins = <
 551                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 552                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 553                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 554                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 555                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 556                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 557                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 558                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 559                 >;
 560         };
 561
 562         pinctrl_wdog: wdoggrp {
 563                 fsl,pins = <
 564                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 565                 >;
 566         };
 567 };