arch/arm/boot/dts/imx6qdl-gw560x.dtsi

   1 /*
   2  * Copyright 2017 Gateworks Corporation
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include <dt-bindings/gpio/gpio.h>
  49 #include <dt-bindings/input/input.h>
  50
  51 / {
  52         /* these are used by bootloader for disabling nodes */
  53         aliases {
  54                 led0 = &led0;
  55                 led1 = &led1;
  56                 led2 = &led2;
  57                 ssi0 = &ssi1;
  58                 usb0 = &usbh1;
  59                 usb1 = &usbotg;
  60         };
  61
  62         chosen {
  63                 stdout-path = &uart2;
  64         };
  65
  66         backlight-display {
  67                 compatible = "pwm-backlight";
  68                 pwms = <&pwm4 0 5000000>;
  69                 brightness-levels = <
  70                         0  1  2  3  4  5  6  7  8  9
  71                         10 11 12 13 14 15 16 17 18 19
  72                         20 21 22 23 24 25 26 27 28 29
  73                         30 31 32 33 34 35 36 37 38 39
  74                         40 41 42 43 44 45 46 47 48 49
  75                         50 51 52 53 54 55 56 57 58 59
  76                         60 61 62 63 64 65 66 67 68 69
  77                         70 71 72 73 74 75 76 77 78 79
  78                         80 81 82 83 84 85 86 87 88 89
  79                         90 91 92 93 94 95 96 97 98 99
  80                         100
  81                         >;
  82                 default-brightness-level = <100>;
  83         };
  84
  85         backlight-keypad {
  86                 compatible = "gpio-backlight";
  87                 gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
  88                 default-on;
  89         };
  90
  91         leds {
  92                 compatible = "gpio-leds";
  93                 pinctrl-names = "default";
  94                 pinctrl-0 = <&pinctrl_gpio_leds>;
  95
  96                 led0: user1 {
  97                         label = "user1";
  98                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  99                         default-state = "on";
 100                         linux,default-trigger = "heartbeat";
 101                 };
 102
 103                 led1: user2 {
 104                         label = "user2";
 105                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 106                         default-state = "off";
 107                 };
 108
 109                 led2: user3 {
 110                         label = "user3";
 111                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 112                         default-state = "off";
 113                 };
 114         };
 115
 116         memory@10000000 {
 117                 reg = <0x10000000 0x40000000>;
 118         };
 119
 120         pps {
 121                 compatible = "pps-gpio";
 122                 pinctrl-names = "default";
 123                 pinctrl-0 = <&pinctrl_pps>;
 124                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 125         };
 126
 127         reg_2p5v: regulator-2p5v {
 128                 compatible = "regulator-fixed";
 129                 regulator-name = "2P5V";
 130                 regulator-min-microvolt = <2500000>;
 131                 regulator-max-microvolt = <2500000>;
 132                 regulator-always-on;
 133         };
 134
 135         reg_3p3v: regulator-3p3v {
 136                 compatible = "regulator-fixed";
 137                 regulator-name = "3P3V";
 138                 regulator-min-microvolt = <3300000>;
 139                 regulator-max-microvolt = <3300000>;
 140                 regulator-always-on;
 141         };
 142
 143         reg_5p0v: regulator-5p0v {
 144                 compatible = "regulator-fixed";
 145                 regulator-name = "5P0V";
 146                 regulator-min-microvolt = <5000000>;
 147                 regulator-max-microvolt = <5000000>;
 148                 regulator-always-on;
 149         };
 150
 151         reg_12p0v: regulator-12p0v {
 152                 compatible = "regulator-fixed";
 153                 regulator-name = "12P0V";
 154                 regulator-min-microvolt = <12000000>;
 155                 regulator-max-microvolt = <12000000>;
 156                 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
 157                 enable-active-high;
 158         };
 159
 160         reg_1p4v: regulator-vddsoc {
 161                 compatible = "regulator-fixed";
 162                 regulator-name = "vdd_soc";
 163                 regulator-min-microvolt = <1400000>;
 164                 regulator-max-microvolt = <1400000>;
 165                 regulator-always-on;
 166         };
 167
 168         reg_usb_h1_vbus: regulator-usb-h1-vbus {
 169                 compatible = "regulator-fixed";
 170                 regulator-name = "usb_h1_vbus";
 171                 regulator-min-microvolt = <5000000>;
 172                 regulator-max-microvolt = <5000000>;
 173                 regulator-always-on;
 174         };
 175
 176         reg_usb_otg_vbus: regulator-usb-otg-vbus {
 177                 compatible = "regulator-fixed";
 178                 regulator-name = "usb_otg_vbus";
 179                 regulator-min-microvolt = <5000000>;
 180                 regulator-max-microvolt = <5000000>;
 181                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 182                 enable-active-high;
 183         };
 184
 185         sound {
 186                 compatible = "fsl,imx6q-ventana-sgtl5000",
 187                              "fsl,imx-audio-sgtl5000";
 188                 model = "sgtl5000-audio";
 189                 ssi-controller = <&ssi1>;
 190                 audio-codec = <&sgtl5000>;
 191                 audio-routing =
 192                         "MIC_IN", "Mic Jack",
 193                         "Mic Jack", "Mic Bias",
 194                         "Headphone Jack", "HP_OUT";
 195                 mux-int-port = <1>;
 196                 mux-ext-port = <4>;
 197         };
 198 };
 199
 200 &audmux {
 201         pinctrl-names = "default";
 202         pinctrl-0 = <&pinctrl_audmux>;
 203         status = "okay";
 204 };
 205
 206 &ecspi3 {
 207         cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 208         pinctrl-names = "default";
 209         pinctrl-0 = <&pinctrl_ecspi3>;
 210         status = "okay";
 211 };
 212
 213 &can1 {
 214         pinctrl-names = "default";
 215         pinctrl-0 = <&pinctrl_flexcan>;
 216         status = "okay";
 217 };
 218
 219 &clks {
 220         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 221                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 222         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 223                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 224 };
 225
 226 &fec {
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&pinctrl_enet>;
 229         phy-mode = "rgmii-id";
 230         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 231         status = "okay";
 232 };
 233
 234 &hdmi {
 235         ddc-i2c-bus = <&i2c3>;
 236         status = "okay";
 237 };
 238
 239 &i2c1 {
 240         clock-frequency = <100000>;
 241         pinctrl-names = "default";
 242         pinctrl-0 = <&pinctrl_i2c1>;
 243         status = "okay";
 244
 245         eeprom1: eeprom@50 {
 246                 compatible = "atmel,24c02";
 247                 reg = <0x50>;
 248                 pagesize = <16>;
 249         };
 250
 251         eeprom2: eeprom@51 {
 252                 compatible = "atmel,24c02";
 253                 reg = <0x51>;
 254                 pagesize = <16>;
 255         };
 256
 257         eeprom3: eeprom@52 {
 258                 compatible = "atmel,24c02";
 259                 reg = <0x52>;
 260                 pagesize = <16>;
 261         };
 262
 263         eeprom4: eeprom@53 {
 264                 compatible = "atmel,24c02";
 265                 reg = <0x53>;
 266                 pagesize = <16>;
 267         };
 268
 269         pca9555: gpio@23 {
 270                 compatible = "nxp,pca9555";
 271                 reg = <0x23>;
 272                 gpio-controller;
 273                 #gpio-cells = <2>;
 274         };
 275
 276         ds1672: rtc@68 {
 277                 compatible = "dallas,ds1672";
 278                 reg = <0x68>;
 279         };
 280 };
 281
 282 &i2c2 {
 283         clock-frequency = <100000>;
 284         pinctrl-names = "default";
 285         pinctrl-0 = <&pinctrl_i2c2>;
 286         status = "okay";
 287
 288         sgtl5000: codec@a {
 289                 compatible = "fsl,sgtl5000";
 290                 reg = <0x0a>;
 291                 clocks = <&clks IMX6QDL_CLK_CKO>;
 292                 VDDA-supply = <&reg_1p8v>;
 293                 VDDIO-supply = <&reg_3p3v>;
 294         };
 295
 296         tca8418: keypad@34 {
 297                 compatible = "ti,tca8418";
 298                 pinctrl-names = "default";
 299                 pinctrl-0 = <&pinctrl_keypad>;
 300                 reg = <0x34>;
 301                 interrupt-parent = <&gpio5>;
 302                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 303                 linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
 304                                  MATRIX_KEY(0x00, 0x00, BTN_1)
 305                                  MATRIX_KEY(0x01, 0x01, BTN_2)
 306                                  MATRIX_KEY(0x01, 0x00, BTN_3)
 307                                  MATRIX_KEY(0x02, 0x00, BTN_4)
 308                                  MATRIX_KEY(0x00, 0x03, BTN_5)
 309                                  MATRIX_KEY(0x00, 0x02, BTN_6)
 310                                  MATRIX_KEY(0x01, 0x03, BTN_7)
 311                                  MATRIX_KEY(0x01, 0x02, BTN_8)
 312                                  MATRIX_KEY(0x02, 0x02, BTN_9)
 313                 >;
 314                 keypad,num-rows = <4>;
 315                 keypad,num-columns = <4>;
 316         };
 317
 318         ltc3676: pmic@3c {
 319                 compatible = "lltc,ltc3676";
 320                 pinctrl-names = "default";
 321                 pinctrl-0 = <&pinctrl_pmic>;
 322                 reg = <0x3c>;
 323                 interrupt-parent = <&gpio1>;
 324                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 325
 326                 regulators {
 327                         /* VDD_DDR (1+R1/R2 = 2.105) */
 328                         reg_vdd_ddr: sw2 {
 329                                 regulator-name = "vddddr";
 330                                 regulator-min-microvolt = <868310>;
 331                                 regulator-max-microvolt = <1684000>;
 332                                 lltc,fb-voltage-divider = <221000 200000>;
 333                                 regulator-ramp-delay = <7000>;
 334                                 regulator-boot-on;
 335                                 regulator-always-on;
 336                         };
 337
 338                         /* VDD_ARM (1+R1/R2 = 1.931) */
 339                         reg_vdd_arm: sw3 {
 340                                 regulator-name = "vddarm";
 341                                 regulator-min-microvolt = <796551>;
 342                                 regulator-max-microvolt = <1544827>;
 343                                 lltc,fb-voltage-divider = <243000 261000>;
 344                                 regulator-ramp-delay = <7000>;
 345                                 regulator-boot-on;
 346                                 regulator-always-on;
 347                                 linux,phandle = <&reg_vdd_arm>;
 348                         };
 349
 350                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 351                         reg_1p8v: sw4 {
 352                                 regulator-name = "vdd1p8";
 353                                 regulator-min-microvolt = <1033310>;
 354                                 regulator-max-microvolt = <2004000>;
 355                                 lltc,fb-voltage-divider = <301000 200000>;
 356                                 regulator-ramp-delay = <7000>;
 357                                 regulator-boot-on;
 358                                 regulator-always-on;
 359                         };
 360
 361                         /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
 362                         reg_1p0v: ldo2 {
 363                                 regulator-name = "vdd1p0";
 364                                 regulator-min-microvolt = <950000>;
 365                                 regulator-max-microvolt = <1050000>;
 366                                 lltc,fb-voltage-divider = <78700 200000>;
 367                                 regulator-boot-on;
 368                                 regulator-always-on;
 369                         };
 370
 371                         /* VDD_AUD_1P8: Audio codec */
 372                         reg_aud_1p8v: ldo3 {
 373                                 regulator-name = "vdd1p8a";
 374                                 regulator-min-microvolt = <1800000>;
 375                                 regulator-max-microvolt = <1800000>;
 376                                 regulator-boot-on;
 377                         };
 378
 379                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 380                         reg_3p0v: ldo4 {
 381                                 regulator-name = "vdd3p0";
 382                                 regulator-min-microvolt = <3023250>;
 383                                 regulator-max-microvolt = <3023250>;
 384                                 lltc,fb-voltage-divider = <634000 200000>;
 385                                 regulator-boot-on;
 386                                 regulator-always-on;
 387                         };
 388                 };
 389         };
 390 };
 391
 392 &i2c3 {
 393         clock-frequency = <100000>;
 394         pinctrl-names = "default";
 395         pinctrl-0 = <&pinctrl_i2c3>;
 396         status = "okay";
 397
 398         egalax_ts: touchscreen@4 {
 399                 compatible = "eeti,egalax_ts";
 400                 reg = <0x04>;
 401                 interrupt-parent = <&gpio5>;
 402                 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 403                 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 404         };
 405 };
 406
 407 &ldb {
 408         fsl,dual-channel;
 409         status = "okay";
 410
 411         lvds-channel@0 {
 412                 fsl,data-mapping = "spwg";
 413                 fsl,data-width = <18>;
 414                 status = "okay";
 415
 416                 display-timings {
 417                         native-mode = <&timing0>;
 418                         timing0: hsd100pxn1 {
 419                                 clock-frequency = <65000000>;
 420                                 hactive = <1024>;
 421                                 vactive = <768>;
 422                                 hback-porch = <220>;
 423                                 hfront-porch = <40>;
 424                                 vback-porch = <21>;
 425                                 vfront-porch = <7>;
 426                                 hsync-len = <60>;
 427                                 vsync-len = <10>;
 428                         };
 429                 };
 430         };
 431 };
 432
 433 &pcie {
 434         pinctrl-names = "default";
 435         pinctrl-0 = <&pinctrl_pcie>;
 436         reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
 437         status = "okay";
 438 };
 439
 440 &pwm2 {
 441         pinctrl-names = "default";
 442         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 443         status = "disabled";
 444 };
 445
 446 &pwm3 {
 447         pinctrl-names = "default";
 448         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 449         status = "disabled";
 450 };
 451
 452 &pwm4 {
 453         pinctrl-names = "default";
 454         pinctrl-0 = <&pinctrl_pwm4>;
 455         status = "okay";
 456 };
 457
 458 &ssi1 {
 459         status = "okay";
 460 };
 461
 462 &uart1 {
 463         pinctrl-names = "default";
 464         pinctrl-0 = <&pinctrl_uart1>;
 465         uart-has-rtscts;
 466         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 467         status = "okay";
 468 };
 469
 470 &uart2 {
 471         pinctrl-names = "default";
 472         pinctrl-0 = <&pinctrl_uart2>;
 473         status = "okay";
 474 };
 475
 476 &uart5 {
 477         pinctrl-names = "default";
 478         pinctrl-0 = <&pinctrl_uart5>;
 479         status = "okay";
 480 };
 481
 482 &usbotg {
 483         vbus-supply = <&reg_usb_otg_vbus>;
 484         pinctrl-names = "default";
 485         pinctrl-0 = <&pinctrl_usbotg>;
 486         disable-over-current;
 487         status = "okay";
 488 };
 489
 490 &usbh1 {
 491         vbus-supply = <&reg_usb_h1_vbus>;
 492         pinctrl-names = "default";
 493         pinctrl-0 = <&pinctrl_usbh1>;
 494         status = "okay";
 495 };
 496
 497 &usdhc2 {
 498         pinctrl-names = "default";
 499         pinctrl-0 = <&pinctrl_usdhc2>;
 500         bus-width = <8>;
 501         vmmc-supply = <&reg_3p3v>;
 502         non-removable;
 503         status = "okay";
 504 };
 505
 506 &usdhc3 {
 507         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 508         pinctrl-0 = <&pinctrl_usdhc3>;
 509         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 510         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 511         cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 512         vmmc-supply = <&reg_3p3v>;
 513         status = "okay";
 514 };
 515
 516 &wdog1 {
 517         pinctrl-names = "default";
 518         pinctrl-0 = <&pinctrl_wdog>;
 519         fsl,ext-reset-output;
 520 };
 521
 522 &iomuxc {
 523         pinctrl_audmux: audmuxgrp {
 524                 fsl,pins = <
 525                         /* AUD4 */
 526                         MX6QDL_PAD_DISP0_DAT20__AUD4_TXC        0x130b0
 527                         MX6QDL_PAD_DISP0_DAT21__AUD4_TXD        0x110b0
 528                         MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS       0x130b0
 529                         MX6QDL_PAD_DISP0_DAT23__AUD4_RXD        0x130b0
 530                         MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
 531                         /* AUD6 */
 532                         MX6QDL_PAD_DI0_PIN2__AUD6_TXD           0x130b0
 533                         MX6QDL_PAD_DI0_PIN3__AUD6_TXFS          0x130b0
 534                         MX6QDL_PAD_DI0_PIN4__AUD6_RXD           0x130b0
 535                         MX6QDL_PAD_DI0_PIN15__AUD6_TXC          0x130b0
 536                 >;
 537         };
 538
 539         pinctrl_ecspi3: escpi3grp {
 540                 fsl,pins = <
 541                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 542                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 543                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 544                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x100b1
 545                 >;
 546         };
 547
 548         pinctrl_enet: enetgrp {
 549                 fsl,pins = <
 550                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 551                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 552                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 553                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 554                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 555                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 556                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 557                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 558                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 559                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 560                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 561                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 562                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 563                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 564                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 565                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 566                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x4001b0b0 /* PHY_RST# */
 567                 >;
 568         };
 569
 570         pinctrl_flexcan: flexcangrp {
 571                 fsl,pins = <
 572                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 573                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 574                         MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
 575                 >;
 576         };
 577
 578         pinctrl_gpio_leds: gpioledsgrp {
 579                 fsl,pins = <
 580                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
 581                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
 582                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
 583                 >;
 584         };
 585
 586         pinctrl_i2c1: i2c1grp {
 587                 fsl,pins = <
 588                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 589                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 590                 >;
 591         };
 592
 593         pinctrl_i2c2: i2c2grp {
 594                 fsl,pins = <
 595                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 596                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 597                 >;
 598         };
 599
 600         pinctrl_i2c3: i2c3grp {
 601                 fsl,pins = <
 602                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 603                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 604                         MX6QDL_PAD_GPIO_19__GPIO4_IO05          0x4001b0b0 /* DIOI2C_DIS# */
 605                         MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12      0x0001b0b0 /* LVDS_TOUCH_IRQ# */
 606                         MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x0001b0b0 /* LVDS_BACKEN */
 607                 >;
 608         };
 609
 610         pinctrl_keypad: keypadgrp {
 611                 fsl,pins = <
 612                         MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11      0x0001b0b0 /* KEYPAD_IRQ# */
 613                         MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30       0x0001b0b0 /* KEYPAD_LED_EN */
 614                 >;
 615         };
 616
 617         pinctrl_pcie: pciegrp {
 618                 fsl,pins = <
 619                         MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31      0x1b0b0    /* PCI_RST# */
 620                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x4001b0b0 /* PCIESKT_WDIS# */
 621                 >;
 622         };
 623
 624         pinctrl_pmic: pmicgrp {
 625                 fsl,pins = <
 626                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 627                 >;
 628         };
 629
 630         pinctrl_pps: ppsgrp {
 631                 fsl,pins = <
 632                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 633                 >;
 634         };
 635
 636         pinctrl_pwm2: pwm2grp {
 637                 fsl,pins = <
 638                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 639                 >;
 640         };
 641
 642         pinctrl_pwm3: pwm3grp {
 643                 fsl,pins = <
 644                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 645                 >;
 646         };
 647
 648         pinctrl_pwm4: pwm4grp {
 649                 fsl,pins = <
 650                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 651                 >;
 652         };
 653
 654         pinctrl_uart1: uart1grp {
 655                 fsl,pins = <
 656                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 657                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 658                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 659                 >;
 660         };
 661
 662         pinctrl_uart2: uart2grp {
 663                 fsl,pins = <
 664                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 665                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 666                 >;
 667         };
 668
 669         pinctrl_uart5: uart5grp {
 670                 fsl,pins = <
 671                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 672                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 673                 >;
 674         };
 675
 676         pinctrl_usbh1: usbh1grp {
 677                 fsl,pins = <
 678                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x4001b0b0 /* USBHUB_RST# */
 679                 >;
 680         };
 681
 682         pinctrl_usbotg: usbotggrp {
 683                 fsl,pins = <
 684                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 685                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
 686                         MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x1b0b0 /* OC */
 687                 >;
 688         };
 689
 690         pinctrl_usdhc2: usdhc2grp {
 691                 fsl,pins = <
 692                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x170f9
 693                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x100f9
 694                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x170f9
 695                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x170f9
 696                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x170f9
 697                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x170f9
 698                         MX6QDL_PAD_NANDF_D4__SD2_DATA4          0x170f9
 699                         MX6QDL_PAD_NANDF_D5__SD2_DATA5          0x170f9
 700                         MX6QDL_PAD_NANDF_D6__SD2_DATA6          0x170f9
 701                         MX6QDL_PAD_NANDF_D7__SD2_DATA7          0x170f9
 702                 >;
 703         };
 704
 705         pinctrl_usdhc3: usdhc3grp {
 706                 fsl,pins = <
 707                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 708                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 709                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 710                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 711                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 712                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 713                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 714                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 715                 >;
 716         };
 717
 718         pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 719                 fsl,pins = <
 720                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 721                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 722                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 723                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 724                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 725                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 726                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 727                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 728                 >;
 729         };
 730
 731         pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 732                 fsl,pins = <
 733                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 734                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 735                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 736                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 737                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 738                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 739                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 740                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 741                 >;
 742         };
 743
 744         pinctrl_wdog: wdoggrp {
 745                 fsl,pins = <
 746                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 747                 >;
 748         };
 749 };