mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race
[linux/fpc-iii.git] / arch / arm / boot / dts / keystone-k2l-evm.dts
blob528667618db45ee625916eb6d72d116a8e9e4aed
1 /*
2  * Copyright 2014 Texas Instruments, Inc.
3  *
4  * Keystone 2 Lamarr EVM device tree
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 /dts-v1/;
12 #include "keystone.dtsi"
13 #include "keystone-k2l.dtsi"
15 / {
16         compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
17         model = "Texas Instruments Keystone 2 Lamarr EVM";
19         reserved-memory {
20                 #address-cells = <2>;
21                 #size-cells = <2>;
22                 ranges;
24                 dsp_common_memory: dsp-common-memory@81f800000 {
25                         compatible = "shared-dma-pool";
26                         reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
27                         reusable;
28                         status = "okay";
29                 };
30         };
32         soc {
33                 clocks {
34                         refclksys: refclksys {
35                                 #clock-cells = <0>;
36                                 compatible = "fixed-clock";
37                                 clock-frequency = <122880000>;
38                                 clock-output-names = "refclk-sys";
39                         };
40                 };
41         };
44 &usb_phy {
45         status = "okay";
48 &keystone_usb0 {
49         status = "okay";
52 &usb0 {
53         dr_mode = "host";
56 &i2c0 {
57         dtt@50 {
58                 compatible = "at,24c1024";
59                 reg = <0x50>;
60         };
63 &aemif {
64         cs0 {
65                 #address-cells = <2>;
66                 #size-cells = <1>;
67                 clock-ranges;
68                 ranges;
70                 ti,cs-chipselect = <0>;
71                 /* all timings in nanoseconds */
72                 ti,cs-min-turnaround-ns = <12>;
73                 ti,cs-read-hold-ns = <6>;
74                 ti,cs-read-strobe-ns = <23>;
75                 ti,cs-read-setup-ns = <9>;
76                 ti,cs-write-hold-ns = <8>;
77                 ti,cs-write-strobe-ns = <23>;
78                 ti,cs-write-setup-ns = <8>;
80                 nand@0,0 {
81                         compatible = "ti,keystone-nand","ti,davinci-nand";
82                         #address-cells = <1>;
83                         #size-cells = <1>;
84                         reg = <0 0 0x4000000
85                                1 0 0x0000100>;
87                         ti,davinci-chipselect = <0>;
88                         ti,davinci-mask-ale = <0x2000>;
89                         ti,davinci-mask-cle = <0x4000>;
90                         ti,davinci-mask-chipsel = <0>;
91                         nand-ecc-mode = "hw";
92                         ti,davinci-ecc-bits = <4>;
93                         nand-on-flash-bbt;
95                         partition@0 {
96                                 label = "u-boot";
97                                 reg = <0x0 0x100000>;
98                                 read-only;
99                         };
101                         partition@100000 {
102                                 label = "params";
103                                 reg = <0x100000 0x80000>;
104                                 read-only;
105                         };
107                         partition@180000 {
108                                 label = "ubifs";
109                                 reg = <0x180000 0x7FE80000>;
110                         };
111                 };
112         };
115 &spi0 {
116         nor_flash: n25q128a11@0 {
117                 #address-cells = <1>;
118                 #size-cells = <1>;
119                 compatible = "Micron,n25q128a11";
120                 spi-max-frequency = <54000000>;
121                 m25p,fast-read;
122                 reg = <0>;
124                 partition@0 {
125                         label = "u-boot-spl";
126                         reg = <0x0 0x80000>;
127                         read-only;
128                 };
130                 partition@1 {
131                         label = "misc";
132                         reg = <0x80000 0xf80000>;
133                 };
134         };
137 &mdio {
138         status = "ok";
139         ethphy0: ethernet-phy@0 {
140                 compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
141                 reg = <0>;
142         };
144         ethphy1: ethernet-phy@1 {
145                 compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
146                 reg = <1>;
147         };
150 &dsp0 {
151         memory-region = <&dsp_common_memory>;
152         status = "okay";
155 &dsp1 {
156         memory-region = <&dsp_common_memory>;
157         status = "okay";
160 &dsp2 {
161         memory-region = <&dsp_common_memory>;
162         status = "okay";
165 &dsp3 {
166         memory-region = <&dsp_common_memory>;
167         status = "okay";