2 * linux/arch/arm/kernel/entry-armv.S
4 * Copyright (C) 1996,1997,1998 Russell King.
5 * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
6 * nommu support by Hyok S. Choi (hyok.choi@samsung.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 * Low-level vector interface routines
14 * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
15 * that causes it to save wrong values... Be aware!
18 #include <linux/init.h>
20 #include <asm/assembler.h>
21 #include <asm/memory.h>
22 #include <asm/glue-df.h>
23 #include <asm/glue-pf.h>
24 #include <asm/vfpmacros.h>
25 #ifndef CONFIG_MULTI_IRQ_HANDLER
26 #include <mach/entry-macro.S>
28 #include <asm/thread_notify.h>
29 #include <asm/unwind.h>
30 #include <asm/unistd.h>
32 #include <asm/system_info.h>
33 #include <asm/uaccess-asm.h>
35 #include "entry-header.S"
36 #include <asm/entry-macro-multi.S>
37 #include <asm/probes.h>
43 #ifdef CONFIG_MULTI_IRQ_HANDLER
44 ldr r1, =handle_arch_irq
49 arch_irq_handler_default
55 @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
59 ldr pc, [ip, #PROCESSOR_PABT_FUNC]
68 @ Call the processor-specific abort handler:
71 @ r4 - aborted context pc
72 @ r5 - aborted context psr
74 @ The abort handler must return the aborted address in r0, and
75 @ the fault status register in r1. r9 must be preserved.
80 ldr pc, [ip, #PROCESSOR_DABT_FUNC]
87 .section .kprobes.text,"ax",%progbits
93 * Invalid mode handlers
95 .macro inv_entry, reason
96 sub sp, sp, #PT_REGS_SIZE
97 ARM( stmib sp, {r1 - lr} )
98 THUMB( stmia sp, {r0 - r12} )
99 THUMB( str sp, [sp, #S_SP] )
100 THUMB( str lr, [sp, #S_LR] )
105 inv_entry BAD_PREFETCH
107 ENDPROC(__pabt_invalid)
112 ENDPROC(__dabt_invalid)
117 ENDPROC(__irq_invalid)
120 inv_entry BAD_UNDEFINSTR
123 @ XXX fall through to common_invalid
127 @ common_invalid - generic code for failed exception (re-entrant version of handlers)
133 add r0, sp, #S_PC @ here for interlock avoidance
134 mov r7, #-1 @ "" "" "" ""
135 str r4, [sp] @ save preserved r0
136 stmia r0, {r5 - r7} @ lr_<exception>,
137 @ cpsr_<exception>, "old_r0"
141 ENDPROC(__und_invalid)
147 #if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
148 #define SPFIX(code...) code
150 #define SPFIX(code...)
153 .macro svc_entry, stack_hole=0, trace=1, uaccess=1
155 UNWIND(.save {r0 - pc} )
156 sub sp, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
157 #ifdef CONFIG_THUMB2_KERNEL
158 SPFIX( str r0, [sp] ) @ temporarily saved
160 SPFIX( tst r0, #4 ) @ test original stack alignment
161 SPFIX( ldr r0, [sp] ) @ restored
165 SPFIX( subeq sp, sp, #4 )
169 add r7, sp, #S_SP - 4 @ here for interlock avoidance
170 mov r6, #-1 @ "" "" "" ""
171 add r2, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
172 SPFIX( addeq r2, r2, #4 )
173 str r3, [sp, #-4]! @ save the "real" r0 copied
174 @ from the exception stack
179 @ We are now ready to fill in the remaining blanks on the stack:
183 @ r4 - lr_<exception>, already fixed up for correct return/restart
184 @ r5 - spsr_<exception>
185 @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
190 uaccess_entry tsk, r0, r1, r2, \uaccess
193 #ifdef CONFIG_TRACE_IRQFLAGS
194 bl trace_hardirqs_off
204 THUMB( ldr r5, [sp, #S_PSR] ) @ potentially updated CPSR
205 svc_exit r5 @ return from exception
214 #ifdef CONFIG_PREEMPT
215 ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
216 ldr r0, [tsk, #TI_FLAGS] @ get flags
217 teq r8, #0 @ if preempt count != 0
218 movne r0, #0 @ force flags to 0
219 tst r0, #_TIF_NEED_RESCHED
223 svc_exit r5, irq = 1 @ return from exception
229 #ifdef CONFIG_PREEMPT
232 1: bl preempt_schedule_irq @ irq en/disable is done inside
233 ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
234 tst r0, #_TIF_NEED_RESCHED
240 @ Correct the PC such that it is pointing at the instruction
241 @ which caused the fault. If the faulting instruction was ARM
242 @ the PC will be pointing at the next instruction, and have to
243 @ subtract 4. Otherwise, it is Thumb, and the PC will be
244 @ pointing at the second half of the Thumb instruction. We
245 @ have to subtract 2.
254 #ifdef CONFIG_KPROBES
255 @ If a kprobe is about to simulate a "stmdb sp..." instruction,
256 @ it obviously needs free stack space which then will belong to
258 svc_entry MAX_STACK_SIZE
263 @ call emulation code, which returns using r9 if it has emulated
264 @ the instruction, or the more conventional lr if we are to treat
265 @ this as a real undefined instruction
269 #ifndef CONFIG_THUMB2_KERNEL
273 ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2
274 cmp r0, #0xe800 @ 32-bit instruction if xx >= 0
276 ldrh r9, [r4] @ bottom 16 bits
279 orr r0, r9, r0, lsl #16
281 badr r9, __und_svc_finish
285 mov r1, #4 @ PC correction to apply
287 mov r0, sp @ struct pt_regs *regs
292 ldr r5, [sp, #S_PSR] @ Get SVC cpsr
293 svc_exit r5 @ return from exception
302 svc_exit r5 @ return from exception
309 mov r0, sp @ struct pt_regs *regs
326 * Abort mode handlers
330 @ Taking a FIQ in abort mode is similar to taking a FIQ in SVC mode
331 @ and reuses the same macros. However in abort mode we must also
332 @ save/restore lr_abt and spsr_abt to make nested aborts safe.
338 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
339 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
340 THUMB( msr cpsr_c, r0 )
341 mov r1, lr @ Save lr_abt
342 mrs r2, spsr @ Save spsr_abt, abort is now safe
343 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
344 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
345 THUMB( msr cpsr_c, r0 )
348 add r0, sp, #8 @ struct pt_regs *regs
352 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
353 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
354 THUMB( msr cpsr_c, r0 )
355 mov lr, r1 @ Restore lr_abt, abort is unsafe
356 msr spsr_cxsf, r2 @ Restore spsr_abt
357 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
358 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
359 THUMB( msr cpsr_c, r0 )
368 * EABI note: sp_svc is always 64-bit aligned here, so should PT_REGS_SIZE
371 #if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (PT_REGS_SIZE & 7)
372 #error "sizeof(struct pt_regs) must be a multiple of 8"
375 .macro usr_entry, trace=1, uaccess=1
377 UNWIND(.cantunwind ) @ don't unwind the user space
378 sub sp, sp, #PT_REGS_SIZE
379 ARM( stmib sp, {r1 - r12} )
380 THUMB( stmia sp, {r0 - r12} )
382 ATRAP( mrc p15, 0, r7, c1, c0, 0)
383 ATRAP( ldr r8, .LCcralign)
386 add r0, sp, #S_PC @ here for interlock avoidance
387 mov r6, #-1 @ "" "" "" ""
389 str r3, [sp] @ save the "real" r0 copied
390 @ from the exception stack
392 ATRAP( ldr r8, [r8, #0])
395 @ We are now ready to fill in the remaining blanks on the stack:
397 @ r4 - lr_<exception>, already fixed up for correct return/restart
398 @ r5 - spsr_<exception>
399 @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
401 @ Also, separately save sp_usr and lr_usr
404 ARM( stmdb r0, {sp, lr}^ )
405 THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
411 @ Enable the alignment trap while in kernel mode
413 ATRAP( mcrne p15, 0, r8, c1, c0, 0)
416 @ Clear FP to mark the first stack frame
421 #ifdef CONFIG_TRACE_IRQFLAGS
422 bl trace_hardirqs_off
424 ct_user_exit save = 0
428 .macro kuser_cmpxchg_check
429 #if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS)
431 #warning "NPTL on non MMU needs fixing"
433 @ Make sure our user space atomic helper is restarted
434 @ if it was interrupted in a critical region. Here we
435 @ perform a quick test inline since it should be false
436 @ 99.9999% of the time. The rest is done out of line.
438 blhs kuser_cmpxchg64_fixup
460 b ret_to_user_from_irq
473 @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
474 @ faulting instruction depending on Thumb mode.
475 @ r3 = regs->ARM_cpsr
477 @ The emulation code returns using r9 if it has emulated the
478 @ instruction, or the more conventional lr if we are to treat
479 @ this as a real undefined instruction
481 badr r9, ret_from_exception
483 @ IRQs must be enabled before attempting to read the instruction from
484 @ user space since that could cause a page/translation fault if the
485 @ page table was modified by another CPU.
488 tst r3, #PSR_T_BIT @ Thumb mode?
490 sub r4, r2, #4 @ ARM instr at LR - 4
492 ARM_BE8(rev r0, r0) @ little endian instruction
496 @ r0 = 32-bit ARM instruction which caused the exception
497 @ r2 = PC value for the following instruction (:= regs->ARM_pc)
498 @ r4 = PC value for the faulting instruction
499 @ lr = 32-bit undefined instruction function
500 badr lr, __und_usr_fault_32
505 sub r4, r2, #2 @ First half of thumb instr at LR - 2
506 #if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
508 * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms
509 * can never be supported in a single kernel, this code is not applicable at
510 * all when __LINUX_ARM_ARCH__ < 6. This allows simplifying assumptions to be
511 * made about .arch directives.
513 #if __LINUX_ARM_ARCH__ < 7
514 /* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
515 #define NEED_CPU_ARCHITECTURE
516 ldr r5, .LCcpu_architecture
518 cmp r5, #CPU_ARCH_ARMv7
519 blo __und_usr_fault_16 @ 16bit undefined instruction
521 * The following code won't get run unless the running CPU really is v7, so
522 * coding round the lack of ldrht on older arches is pointless. Temporarily
523 * override the assembler target arch with the minimum required instead:
528 ARM_BE8(rev16 r5, r5) @ little endian instruction
529 cmp r5, #0xe800 @ 32bit instruction if xx != 0
530 blo __und_usr_fault_16_pan @ 16bit undefined instruction
532 ARM_BE8(rev16 r0, r0) @ little endian instruction
534 add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
535 str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
536 orr r0, r0, r5, lsl #16
537 badr lr, __und_usr_fault_32
538 @ r0 = the two 16-bit Thumb instructions which caused the exception
539 @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
540 @ r4 = PC value for the first 16-bit Thumb instruction
541 @ lr = 32bit undefined instruction function
543 #if __LINUX_ARM_ARCH__ < 7
544 /* If the target arch was overridden, change it back: */
545 #ifdef CONFIG_CPU_32v6K
550 #endif /* __LINUX_ARM_ARCH__ < 7 */
551 #else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
558 * The out of line fixup for the ldrt instructions above.
560 .pushsection .text.fixup, "ax"
562 4: str r4, [sp, #S_PC] @ retry current instruction
565 .pushsection __ex_table,"a"
567 #if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
574 * Check whether the instruction is a co-processor instruction.
575 * If yes, we need to call the relevant co-processor handler.
577 * Note that we don't do a full check here for the co-processor
578 * instructions; all instructions with bit 27 set are well
579 * defined. The only instructions that should fault are the
580 * co-processor instructions. However, we have to watch out
581 * for the ARM6/ARM7 SWI bug.
583 * NEON is a special case that has to be handled here. Not all
584 * NEON instructions are co-processor instructions, so we have
585 * to make a special case of checking for them. Plus, there's
586 * five groups of them, so we have a table of mask/opcode pairs
587 * to check against, and if any match then we branch off into the
590 * Emulators may wish to make use of the following registers:
591 * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
592 * r2 = PC value to resume execution after successful emulation
593 * r9 = normal "successful" return address
594 * r10 = this threads thread_info structure
595 * lr = unrecognised instruction return address
596 * IRQs enabled, FIQs enabled.
599 @ Fall-through from Thumb-2 __und_usr
602 get_thread_info r10 @ get current thread
603 adr r6, .LCneon_thumb_opcodes
607 get_thread_info r10 @ get current thread
609 adr r6, .LCneon_arm_opcodes
610 2: ldr r5, [r6], #4 @ mask value
611 ldr r7, [r6], #4 @ opcode bits matching in mask
612 cmp r5, #0 @ end mask?
615 cmp r8, r7 @ NEON instruction?
618 strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
619 strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
620 b do_vfp @ let VFP handler handle this
623 tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
624 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2
626 and r8, r0, #0x00000f00 @ mask out CP number
627 THUMB( lsr r8, r8, #8 )
629 add r6, r10, #TI_USED_CP
630 ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[]
631 THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[]
633 @ Test if we need to give access to iWMMXt coprocessors
634 ldr r5, [r10, #TI_FLAGS]
635 rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only
636 movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
637 bcs iwmmxt_task_enable
639 ARM( add pc, pc, r8, lsr #6 )
640 THUMB( lsl r8, r8, #2 )
645 W(b) do_fpe @ CP#1 (FPE)
646 W(b) do_fpe @ CP#2 (FPE)
649 b crunch_task_enable @ CP#4 (MaverickCrunch)
650 b crunch_task_enable @ CP#5 (MaverickCrunch)
651 b crunch_task_enable @ CP#6 (MaverickCrunch)
661 W(b) do_vfp @ CP#10 (VFP)
662 W(b) do_vfp @ CP#11 (VFP)
664 ret.w lr @ CP#10 (VFP)
665 ret.w lr @ CP#11 (VFP)
669 ret.w lr @ CP#14 (Debug)
670 ret.w lr @ CP#15 (Control)
672 #ifdef NEED_CPU_ARCHITECTURE
675 .word __cpu_architecture
682 .word 0xfe000000 @ mask
683 .word 0xf2000000 @ opcode
685 .word 0xff100000 @ mask
686 .word 0xf4000000 @ opcode
688 .word 0x00000000 @ mask
689 .word 0x00000000 @ opcode
691 .LCneon_thumb_opcodes:
692 .word 0xef000000 @ mask
693 .word 0xef000000 @ opcode
695 .word 0xff100000 @ mask
696 .word 0xf9000000 @ opcode
698 .word 0x00000000 @ mask
699 .word 0x00000000 @ opcode
704 add r10, r10, #TI_FPSTATE @ r10 = workspace
705 ldr pc, [r4] @ Call FP module USR entry point
708 * The FP module is called with these registers set:
711 * r9 = normal "successful" return address
713 * lr = unrecognised FP instruction return address
729 __und_usr_fault_16_pan:
734 badr lr, ret_from_exception
736 ENDPROC(__und_usr_fault_32)
737 ENDPROC(__und_usr_fault_16)
747 * This is the return code to user mode for abort handlers
749 ENTRY(ret_from_exception)
757 ENDPROC(ret_from_exception)
763 mov r0, sp @ struct pt_regs *regs
766 restore_user_regs fast = 0, offset = 0
771 * Register switch for ARMv3 and ARMv4 processors
772 * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
773 * previous and next are guaranteed not to be the same.
778 add ip, r1, #TI_CPU_SAVE
779 ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
780 THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
781 THUMB( str sp, [ip], #4 )
782 THUMB( str lr, [ip], #4 )
783 ldr r4, [r2, #TI_TP_VALUE]
784 ldr r5, [r2, #TI_TP_VALUE + 4]
785 #ifdef CONFIG_CPU_USE_DOMAINS
786 mrc p15, 0, r6, c3, c0, 0 @ Get domain register
787 str r6, [r1, #TI_CPU_DOMAIN] @ Save old domain register
788 ldr r6, [r2, #TI_CPU_DOMAIN]
790 switch_tls r1, r4, r5, r3, r7
791 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
792 ldr r7, [r2, #TI_TASK]
793 ldr r8, =__stack_chk_guard
794 .if (TSK_STACK_CANARY > IMM12_MASK)
795 add r7, r7, #TSK_STACK_CANARY & ~IMM12_MASK
797 ldr r7, [r7, #TSK_STACK_CANARY & IMM12_MASK]
799 #ifdef CONFIG_CPU_USE_DOMAINS
800 mcr p15, 0, r6, c3, c0, 0 @ Set domain register
803 add r4, r2, #TI_CPU_SAVE
804 ldr r0, =thread_notify_head
805 mov r1, #THREAD_NOTIFY_SWITCH
806 bl atomic_notifier_call_chain
807 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
812 ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously
813 THUMB( ldmia ip!, {r4 - sl, fp} ) @ Load all regs saved previously
814 THUMB( ldr sp, [ip], #4 )
815 THUMB( ldr pc, [ip] )
824 * Each segment is 32-byte aligned and will be moved to the top of the high
825 * vector page. New segments (if ever needed) must be added in front of
826 * existing ones. This mechanism should be used only for things that are
827 * really small and justified, and not be abused freely.
829 * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
834 #ifdef CONFIG_ARM_THUMB
841 .macro kuser_pad, sym, size
843 .rept 4 - (. - \sym) & 3
847 .rept (\size - (. - \sym)) / 4
852 #ifdef CONFIG_KUSER_HELPERS
854 .globl __kuser_helper_start
855 __kuser_helper_start:
858 * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
859 * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
862 __kuser_cmpxchg64: @ 0xffff0f60
864 #if defined(CONFIG_CPU_32v6K)
866 stmfd sp!, {r4, r5, r6, r7}
867 ldrd r4, r5, [r0] @ load old val
868 ldrd r6, r7, [r1] @ load new val
870 1: ldrexd r0, r1, [r2] @ load current val
871 eors r3, r0, r4 @ compare with oldval (1)
872 eoreqs r3, r1, r5 @ compare with oldval (2)
873 strexdeq r3, r6, r7, [r2] @ store newval if eq
874 teqeq r3, #1 @ success?
875 beq 1b @ if no then retry
877 rsbs r0, r3, #0 @ set returned val and C flag
878 ldmfd sp!, {r4, r5, r6, r7}
881 #elif !defined(CONFIG_SMP)
886 * The only thing that can break atomicity in this cmpxchg64
887 * implementation is either an IRQ or a data abort exception
888 * causing another process/thread to be scheduled in the middle of
889 * the critical sequence. The same strategy as for cmpxchg is used.
891 stmfd sp!, {r4, r5, r6, lr}
892 ldmia r0, {r4, r5} @ load old val
893 ldmia r1, {r6, lr} @ load new val
894 1: ldmia r2, {r0, r1} @ load current val
895 eors r3, r0, r4 @ compare with oldval (1)
896 eoreqs r3, r1, r5 @ compare with oldval (2)
897 2: stmeqia r2, {r6, lr} @ store newval if eq
898 rsbs r0, r3, #0 @ set return val and C flag
899 ldmfd sp!, {r4, r5, r6, pc}
902 kuser_cmpxchg64_fixup:
903 @ Called from kuser_cmpxchg_fixup.
904 @ r4 = address of interrupted insn (must be preserved).
905 @ sp = saved regs. r7 and r8 are clobbered.
906 @ 1b = first critical insn, 2b = last critical insn.
907 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
909 sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
911 rsbcss r8, r8, #(2b - 1b)
912 strcs r7, [sp, #S_PC]
913 #if __LINUX_ARM_ARCH__ < 6
914 bcc kuser_cmpxchg32_fixup
920 #warning "NPTL on non MMU needs fixing"
927 #error "incoherent kernel configuration"
930 kuser_pad __kuser_cmpxchg64, 64
932 __kuser_memory_barrier: @ 0xffff0fa0
936 kuser_pad __kuser_memory_barrier, 32
938 __kuser_cmpxchg: @ 0xffff0fc0
940 #if __LINUX_ARM_ARCH__ < 6
945 * The only thing that can break atomicity in this cmpxchg
946 * implementation is either an IRQ or a data abort exception
947 * causing another process/thread to be scheduled in the middle
948 * of the critical sequence. To prevent this, code is added to
949 * the IRQ and data abort exception handlers to set the pc back
950 * to the beginning of the critical section if it is found to be
951 * within that critical section (see kuser_cmpxchg_fixup).
953 1: ldr r3, [r2] @ load current val
954 subs r3, r3, r0 @ compare with oldval
955 2: streq r1, [r2] @ store newval if eq
956 rsbs r0, r3, #0 @ set return val and C flag
960 kuser_cmpxchg32_fixup:
961 @ Called from kuser_cmpxchg_check macro.
962 @ r4 = address of interrupted insn (must be preserved).
963 @ sp = saved regs. r7 and r8 are clobbered.
964 @ 1b = first critical insn, 2b = last critical insn.
965 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
967 sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
969 rsbcss r8, r8, #(2b - 1b)
970 strcs r7, [sp, #S_PC]
975 #warning "NPTL on non MMU needs fixing"
990 /* beware -- each __kuser slot must be 8 instructions max */
991 ALT_SMP(b __kuser_memory_barrier)
996 kuser_pad __kuser_cmpxchg, 32
998 __kuser_get_tls: @ 0xffff0fe0
999 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
1001 mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code
1002 kuser_pad __kuser_get_tls, 16
1004 .word 0 @ 0xffff0ff0 software TLS value, then
1005 .endr @ pad up to __kuser_helper_version
1007 __kuser_helper_version: @ 0xffff0ffc
1008 .word ((__kuser_helper_end - __kuser_helper_start) >> 5)
1010 .globl __kuser_helper_end
1020 * This code is copied to 0xffff1000 so we can use branches in the
1021 * vectors, rather than ldr's. Note that this code must not exceed
1024 * Common stub entry macro:
1025 * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
1027 * SP points to a minimal amount of processor-private memory, the address
1028 * of which is copied into r0 for the mode specific abort handler.
1030 .macro vector_stub, name, mode, correction=0
1035 sub lr, lr, #\correction
1039 @ Save r0, lr_<exception> (parent PC) and spsr_<exception>
1042 stmia sp, {r0, lr} @ save r0, lr
1044 str lr, [sp, #8] @ save spsr
1047 @ Prepare for SVC32 mode. IRQs remain disabled.
1050 eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
1054 @ the branch table must immediately follow this code
1058 THUMB( ldr lr, [r0, lr, lsl #2] )
1060 ARM( ldr lr, [pc, lr, lsl #2] )
1061 movs pc, lr @ branch to handler in SVC mode
1062 ENDPROC(vector_\name)
1065 @ handler addresses follow this label
1069 .section .stubs, "ax", %progbits
1070 @ This must be the first word
1074 ARM( swi SYS_ERROR0 )
1080 * Interrupt dispatcher
1082 vector_stub irq, IRQ_MODE, 4
1084 .long __irq_usr @ 0 (USR_26 / USR_32)
1085 .long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
1086 .long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
1087 .long __irq_svc @ 3 (SVC_26 / SVC_32)
1088 .long __irq_invalid @ 4
1089 .long __irq_invalid @ 5
1090 .long __irq_invalid @ 6
1091 .long __irq_invalid @ 7
1092 .long __irq_invalid @ 8
1093 .long __irq_invalid @ 9
1094 .long __irq_invalid @ a
1095 .long __irq_invalid @ b
1096 .long __irq_invalid @ c
1097 .long __irq_invalid @ d
1098 .long __irq_invalid @ e
1099 .long __irq_invalid @ f
1102 * Data abort dispatcher
1103 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
1105 vector_stub dabt, ABT_MODE, 8
1107 .long __dabt_usr @ 0 (USR_26 / USR_32)
1108 .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
1109 .long __dabt_invalid @ 2 (IRQ_26 / IRQ_32)
1110 .long __dabt_svc @ 3 (SVC_26 / SVC_32)
1111 .long __dabt_invalid @ 4
1112 .long __dabt_invalid @ 5
1113 .long __dabt_invalid @ 6
1114 .long __dabt_invalid @ 7
1115 .long __dabt_invalid @ 8
1116 .long __dabt_invalid @ 9
1117 .long __dabt_invalid @ a
1118 .long __dabt_invalid @ b
1119 .long __dabt_invalid @ c
1120 .long __dabt_invalid @ d
1121 .long __dabt_invalid @ e
1122 .long __dabt_invalid @ f
1125 * Prefetch abort dispatcher
1126 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
1128 vector_stub pabt, ABT_MODE, 4
1130 .long __pabt_usr @ 0 (USR_26 / USR_32)
1131 .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
1132 .long __pabt_invalid @ 2 (IRQ_26 / IRQ_32)
1133 .long __pabt_svc @ 3 (SVC_26 / SVC_32)
1134 .long __pabt_invalid @ 4
1135 .long __pabt_invalid @ 5
1136 .long __pabt_invalid @ 6
1137 .long __pabt_invalid @ 7
1138 .long __pabt_invalid @ 8
1139 .long __pabt_invalid @ 9
1140 .long __pabt_invalid @ a
1141 .long __pabt_invalid @ b
1142 .long __pabt_invalid @ c
1143 .long __pabt_invalid @ d
1144 .long __pabt_invalid @ e
1145 .long __pabt_invalid @ f
1148 * Undef instr entry dispatcher
1149 * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
1151 vector_stub und, UND_MODE
1153 .long __und_usr @ 0 (USR_26 / USR_32)
1154 .long __und_invalid @ 1 (FIQ_26 / FIQ_32)
1155 .long __und_invalid @ 2 (IRQ_26 / IRQ_32)
1156 .long __und_svc @ 3 (SVC_26 / SVC_32)
1157 .long __und_invalid @ 4
1158 .long __und_invalid @ 5
1159 .long __und_invalid @ 6
1160 .long __und_invalid @ 7
1161 .long __und_invalid @ 8
1162 .long __und_invalid @ 9
1163 .long __und_invalid @ a
1164 .long __und_invalid @ b
1165 .long __und_invalid @ c
1166 .long __und_invalid @ d
1167 .long __und_invalid @ e
1168 .long __und_invalid @ f
1172 /*=============================================================================
1173 * Address exception handler
1174 *-----------------------------------------------------------------------------
1175 * These aren't too critical.
1176 * (they're not supposed to happen, and won't happen in 32-bit data mode).
1182 /*=============================================================================
1184 *-----------------------------------------------------------------------------
1185 * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
1188 vector_stub fiq, FIQ_MODE, 4
1190 .long __fiq_usr @ 0 (USR_26 / USR_32)
1191 .long __fiq_svc @ 1 (FIQ_26 / FIQ_32)
1192 .long __fiq_svc @ 2 (IRQ_26 / IRQ_32)
1193 .long __fiq_svc @ 3 (SVC_26 / SVC_32)
1209 .section .vectors, "ax", %progbits
1213 W(ldr) pc, .L__vectors_start + 0x1000
1216 W(b) vector_addrexcptn
1227 #ifdef CONFIG_MULTI_IRQ_HANDLER
1228 .globl handle_arch_irq