Linux 3.2.23
[linux/fpc-iii.git] / arch / powerpc / include / asm / reg_8xx.h
blobe8ea346b21d38af5b5d327e00f8b28ac9baf22ba
1 /*
2 * Contains register definitions common to PowerPC 8xx CPUs. Notice
3 */
4 #ifndef _ASM_POWERPC_REG_8xx_H
5 #define _ASM_POWERPC_REG_8xx_H
7 /* Cache control on the MPC8xx is provided through some additional
8 * special purpose registers.
9 */
10 #define SPRN_IC_CST 560 /* Instruction cache control/status */
11 #define SPRN_IC_ADR 561 /* Address needed for some commands */
12 #define SPRN_IC_DAT 562 /* Read-only data register */
13 #define SPRN_DC_CST 568 /* Data cache control/status */
14 #define SPRN_DC_ADR 569 /* Address needed for some commands */
15 #define SPRN_DC_DAT 570 /* Read-only data register */
17 /* Commands. Only the first few are available to the instruction cache.
19 #define IDC_ENABLE 0x02000000 /* Cache enable */
20 #define IDC_DISABLE 0x04000000 /* Cache disable */
21 #define IDC_LDLCK 0x06000000 /* Load and lock */
22 #define IDC_UNLINE 0x08000000 /* Unlock line */
23 #define IDC_UNALL 0x0a000000 /* Unlock all */
24 #define IDC_INVALL 0x0c000000 /* Invalidate all */
26 #define DC_FLINE 0x0e000000 /* Flush data cache line */
27 #define DC_SFWT 0x01000000 /* Set forced writethrough mode */
28 #define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
29 #define DC_SLES 0x05000000 /* Set little endian swap mode */
30 #define DC_CLES 0x07000000 /* Clear little endian swap mode */
32 /* Status.
34 #define IDC_ENABLED 0x80000000 /* Cache is enabled */
35 #define IDC_CERR1 0x00200000 /* Cache error 1 */
36 #define IDC_CERR2 0x00100000 /* Cache error 2 */
37 #define IDC_CERR3 0x00080000 /* Cache error 3 */
39 #define DC_DFWT 0x40000000 /* Data cache is forced write through */
40 #define DC_LES 0x20000000 /* Caches are little endian mode */
42 #endif /* _ASM_POWERPC_REG_8xx_H */