2 * MEN 16Z127 GPIO driver
4 * Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de)
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the Free
8 * Software Foundation; version 2 of the License.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
14 #include <linux/err.h>
15 #include <linux/mcb.h>
16 #include <linux/bitops.h>
17 #include <linux/gpio/driver.h>
19 #define MEN_Z127_CTRL 0x00
20 #define MEN_Z127_PSR 0x04
21 #define MEN_Z127_IRQR 0x08
22 #define MEN_Z127_GPIODR 0x0c
23 #define MEN_Z127_IER1 0x10
24 #define MEN_Z127_IER2 0x14
25 #define MEN_Z127_DBER 0x18
26 #define MEN_Z127_ODER 0x1C
27 #define GPIO_TO_DBCNT_REG(gpio) ((gpio * 4) + 0x80)
29 #define MEN_Z127_DB_MIN_US 50
30 /* 16 bit compare register. Each bit represents 50us */
31 #define MEN_Z127_DB_MAX_US (0xffff * MEN_Z127_DB_MIN_US)
32 #define MEN_Z127_DB_IN_RANGE(db) ((db >= MEN_Z127_DB_MIN_US) && \
33 (db <= MEN_Z127_DB_MAX_US))
35 struct men_z127_gpio
{
37 void __iomem
*reg_base
;
41 static int men_z127_debounce(struct gpio_chip
*gc
, unsigned gpio
,
44 struct men_z127_gpio
*priv
= gpiochip_get_data(gc
);
45 struct device
*dev
= gc
->parent
;
49 if (!MEN_Z127_DB_IN_RANGE(debounce
)) {
50 dev_err(dev
, "debounce value %u out of range", debounce
);
55 /* round up or down depending on MSB-1 */
56 rnd
= fls(debounce
) - 1;
58 if (rnd
&& (debounce
& BIT(rnd
- 1)))
59 debounce
= roundup(debounce
, MEN_Z127_DB_MIN_US
);
61 debounce
= rounddown(debounce
, MEN_Z127_DB_MIN_US
);
63 if (debounce
> MEN_Z127_DB_MAX_US
)
64 debounce
= MEN_Z127_DB_MAX_US
;
66 /* 50us per register unit */
70 spin_lock(&gc
->bgpio_lock
);
72 db_en
= readl(priv
->reg_base
+ MEN_Z127_DBER
);
82 writel(db_en
, priv
->reg_base
+ MEN_Z127_DBER
);
83 writel(db_cnt
, priv
->reg_base
+ GPIO_TO_DBCNT_REG(gpio
));
85 spin_unlock(&gc
->bgpio_lock
);
90 static int men_z127_set_single_ended(struct gpio_chip
*gc
,
92 enum pin_config_param param
)
94 struct men_z127_gpio
*priv
= gpiochip_get_data(gc
);
97 spin_lock(&gc
->bgpio_lock
);
98 od_en
= readl(priv
->reg_base
+ MEN_Z127_ODER
);
100 if (param
== PIN_CONFIG_DRIVE_OPEN_DRAIN
)
101 od_en
|= BIT(offset
);
103 /* Implicitly PIN_CONFIG_DRIVE_PUSH_PULL */
104 od_en
&= ~BIT(offset
);
106 writel(od_en
, priv
->reg_base
+ MEN_Z127_ODER
);
107 spin_unlock(&gc
->bgpio_lock
);
112 static int men_z127_set_config(struct gpio_chip
*gc
, unsigned offset
,
113 unsigned long config
)
115 enum pin_config_param param
= pinconf_to_config_param(config
);
118 case PIN_CONFIG_DRIVE_OPEN_DRAIN
:
119 case PIN_CONFIG_DRIVE_PUSH_PULL
:
120 return men_z127_set_single_ended(gc
, offset
, param
);
122 case PIN_CONFIG_INPUT_DEBOUNCE
:
123 return men_z127_debounce(gc
, offset
,
124 pinconf_to_config_argument(config
));
133 static int men_z127_probe(struct mcb_device
*mdev
,
134 const struct mcb_device_id
*id
)
136 struct men_z127_gpio
*men_z127_gpio
;
137 struct device
*dev
= &mdev
->dev
;
140 men_z127_gpio
= devm_kzalloc(dev
, sizeof(struct men_z127_gpio
),
145 men_z127_gpio
->mem
= mcb_request_mem(mdev
, dev_name(dev
));
146 if (IS_ERR(men_z127_gpio
->mem
)) {
147 dev_err(dev
, "failed to request device memory");
148 return PTR_ERR(men_z127_gpio
->mem
);
151 men_z127_gpio
->reg_base
= ioremap(men_z127_gpio
->mem
->start
,
152 resource_size(men_z127_gpio
->mem
));
153 if (men_z127_gpio
->reg_base
== NULL
) {
158 mcb_set_drvdata(mdev
, men_z127_gpio
);
160 ret
= bgpio_init(&men_z127_gpio
->gc
, &mdev
->dev
, 4,
161 men_z127_gpio
->reg_base
+ MEN_Z127_PSR
,
162 men_z127_gpio
->reg_base
+ MEN_Z127_CTRL
,
164 men_z127_gpio
->reg_base
+ MEN_Z127_GPIODR
,
169 men_z127_gpio
->gc
.set_config
= men_z127_set_config
;
171 ret
= gpiochip_add_data(&men_z127_gpio
->gc
, men_z127_gpio
);
173 dev_err(dev
, "failed to register MEN 16Z127 GPIO controller");
177 dev_info(dev
, "MEN 16Z127 GPIO driver registered");
182 iounmap(men_z127_gpio
->reg_base
);
184 mcb_release_mem(men_z127_gpio
->mem
);
188 static void men_z127_remove(struct mcb_device
*mdev
)
190 struct men_z127_gpio
*men_z127_gpio
= mcb_get_drvdata(mdev
);
192 gpiochip_remove(&men_z127_gpio
->gc
);
193 iounmap(men_z127_gpio
->reg_base
);
194 mcb_release_mem(men_z127_gpio
->mem
);
197 static const struct mcb_device_id men_z127_ids
[] = {
201 MODULE_DEVICE_TABLE(mcb
, men_z127_ids
);
203 static struct mcb_driver men_z127_driver
= {
207 .probe
= men_z127_probe
,
208 .remove
= men_z127_remove
,
209 .id_table
= men_z127_ids
,
211 module_mcb_driver(men_z127_driver
);
213 MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
214 MODULE_DESCRIPTION("MEN 16z127 GPIO Controller");
215 MODULE_LICENSE("GPL v2");
216 MODULE_ALIAS("mcb:16z127");