arch/mips/mm/sc-mips.c

   1 /*
   2  * Copyright (C) 2006 Chris Dearman (chris@mips.com),
   3  */
   4 #include <linux/init.h>
   5 #include <linux/kernel.h>
   6 #include <linux/sched.h>
   7 #include <linux/mm.h>
   8
   9 #include <asm/cpu-type.h>
  10 #include <asm/mipsregs.h>
  11 #include <asm/bcache.h>
  12 #include <asm/cacheops.h>
  13 #include <asm/page.h>
  14 #include <asm/pgtable.h>
  15 #include <asm/mmu_context.h>
  16 #include <asm/r4kcache.h>
  17
  18 /*
  19  * MIPS32/MIPS64 L2 cache handling
  20  */
  21
  22 /*
  23  * Writeback and invalidate the secondary cache before DMA.
  24  */
  25 static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
  26 {
  27         blast_scache_range(addr, addr + size);
  28 }
  29
  30 /*
  31  * Invalidate the secondary cache before DMA.
  32  */
  33 static void mips_sc_inv(unsigned long addr, unsigned long size)
  34 {
  35         unsigned long lsize = cpu_scache_line_size();
  36         unsigned long almask = ~(lsize - 1);
  37
  38         cache_op(Hit_Writeback_Inv_SD, addr & almask);
  39         cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
  40         blast_inv_scache_range(addr, addr + size);
  41 }
  42
  43 static void mips_sc_enable(void)
  44 {
  45         /* L2 cache is permanently enabled */
  46 }
  47
  48 static void mips_sc_disable(void)
  49 {
  50         /* L2 cache is permanently enabled */
  51 }
  52
  53 static struct bcache_ops mips_sc_ops = {
  54         .bc_enable = mips_sc_enable,
  55         .bc_disable = mips_sc_disable,
  56         .bc_wback_inv = mips_sc_wback_inv,
  57         .bc_inv = mips_sc_inv
  58 };
  59
  60 /*
  61  * Check if the L2 cache controller is activated on a particular platform.
  62  * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
  63  * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
  64  * cache being disabled.  However there is no guarantee for this to be
  65  * true on all platforms.  In an act of stupidity the spec defined bits
  66  * 12..15 as implementation defined so below function will eventually have
  67  * to be replaced by a platform specific probe.
  68  */
  69 static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
  70 {
  71         unsigned int config2 = read_c0_config2();
  72         unsigned int tmp;
  73
  74         /* Check the bypass bit (L2B) */
  75         switch (current_cpu_type()) {
  76         case CPU_34K:
  77         case CPU_74K:
  78         case CPU_1004K:
  79         case CPU_1074K:
  80         case CPU_INTERAPTIV:
  81         case CPU_PROAPTIV:
  82         case CPU_P5600:
  83         case CPU_BMIPS5000:
  84                 if (config2 & (1 << 12))
  85                         return 0;
  86         }
  87
  88         tmp = (config2 >> 4) & 0x0f;
  89         if (0 < tmp && tmp <= 7)
  90                 c->scache.linesz = 2 << tmp;
  91         else
  92                 return 0;
  93         return 1;
  94 }
  95
  96 static inline int __init mips_sc_probe(void)
  97 {
  98         struct cpuinfo_mips *c = &current_cpu_data;
  99         unsigned int config1, config2;
 100         unsigned int tmp;
 101
 102         /* Mark as not present until probe completed */
 103         c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
 104
 105         /* Ignore anything but MIPSxx processors */
 106         if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
 107                               MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)))
 108                 return 0;
 109
 110         /* Does this MIPS32/MIPS64 CPU have a config2 register? */
 111         config1 = read_c0_config1();
 112         if (!(config1 & MIPS_CONF_M))
 113                 return 0;
 114
 115         config2 = read_c0_config2();
 116
 117         if (!mips_sc_is_activated(c))
 118                 return 0;
 119
 120         tmp = (config2 >> 8) & 0x0f;
 121         if (0 <= tmp && tmp <= 7)
 122                 c->scache.sets = 64 << tmp;
 123         else
 124                 return 0;
 125
 126         tmp = (config2 >> 0) & 0x0f;
 127         if (0 <= tmp && tmp <= 7)
 128                 c->scache.ways = tmp + 1;
 129         else
 130                 return 0;
 131
 132         c->scache.waysize = c->scache.sets * c->scache.linesz;
 133         c->scache.waybit = __ffs(c->scache.waysize);
 134
 135         c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
 136
 137         return 1;
 138 }
 139
 140 int mips_sc_init(void)
 141 {
 142         int found = mips_sc_probe();
 143         if (found) {
 144                 mips_sc_enable();
 145                 bcops = &mips_sc_ops;
 146         }
 147         return found;
 148 }