arch/mips/ralink/mt7620.c

   1 /*
   2  * This program is free software; you can redistribute it and/or modify it
   3  * under the terms of the GNU General Public License version 2 as published
   4  * by the Free Software Foundation.
   5  *
   6  * Parts of this file are based on Ralink's 2.6.21 BSP
   7  *
   8  * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
   9  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  10  * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
  11  */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/module.h>
  16
  17 #include <asm/mipsregs.h>
  18 #include <asm/mach-ralink/ralink_regs.h>
  19 #include <asm/mach-ralink/mt7620.h>
  20
  21 #include "common.h"
  22
  23 /* does the board have sdram or ddram */
  24 static int dram_type;
  25
  26 static struct ralink_pinmux_grp mode_mux[] = {
  27         {
  28                 .name = "i2c",
  29                 .mask = MT7620_GPIO_MODE_I2C,
  30                 .gpio_first = 1,
  31                 .gpio_last = 2,
  32         }, {
  33                 .name = "spi",
  34                 .mask = MT7620_GPIO_MODE_SPI,
  35                 .gpio_first = 3,
  36                 .gpio_last = 6,
  37         }, {
  38                 .name = "uartlite",
  39                 .mask = MT7620_GPIO_MODE_UART1,
  40                 .gpio_first = 15,
  41                 .gpio_last = 16,
  42         }, {
  43                 .name = "wdt",
  44                 .mask = MT7620_GPIO_MODE_WDT,
  45                 .gpio_first = 17,
  46                 .gpio_last = 17,
  47         }, {
  48                 .name = "mdio",
  49                 .mask = MT7620_GPIO_MODE_MDIO,
  50                 .gpio_first = 22,
  51                 .gpio_last = 23,
  52         }, {
  53                 .name = "rgmii1",
  54                 .mask = MT7620_GPIO_MODE_RGMII1,
  55                 .gpio_first = 24,
  56                 .gpio_last = 35,
  57         }, {
  58                 .name = "spi refclk",
  59                 .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
  60                 .gpio_first = 37,
  61                 .gpio_last = 39,
  62         }, {
  63                 .name = "jtag",
  64                 .mask = MT7620_GPIO_MODE_JTAG,
  65                 .gpio_first = 40,
  66                 .gpio_last = 44,
  67         }, {
  68                 /* shared lines with jtag */
  69                 .name = "ephy",
  70                 .mask = MT7620_GPIO_MODE_EPHY,
  71                 .gpio_first = 40,
  72                 .gpio_last = 44,
  73         }, {
  74                 .name = "nand",
  75                 .mask = MT7620_GPIO_MODE_JTAG,
  76                 .gpio_first = 45,
  77                 .gpio_last = 59,
  78         }, {
  79                 .name = "rgmii2",
  80                 .mask = MT7620_GPIO_MODE_RGMII2,
  81                 .gpio_first = 60,
  82                 .gpio_last = 71,
  83         }, {
  84                 .name = "wled",
  85                 .mask = MT7620_GPIO_MODE_WLED,
  86                 .gpio_first = 72,
  87                 .gpio_last = 72,
  88         }, {0}
  89 };
  90
  91 static struct ralink_pinmux_grp uart_mux[] = {
  92         {
  93                 .name = "uartf",
  94                 .mask = MT7620_GPIO_MODE_UARTF,
  95                 .gpio_first = 7,
  96                 .gpio_last = 14,
  97         }, {
  98                 .name = "pcm uartf",
  99                 .mask = MT7620_GPIO_MODE_PCM_UARTF,
 100                 .gpio_first = 7,
 101                 .gpio_last = 14,
 102         }, {
 103                 .name = "pcm i2s",
 104                 .mask = MT7620_GPIO_MODE_PCM_I2S,
 105                 .gpio_first = 7,
 106                 .gpio_last = 14,
 107         }, {
 108                 .name = "i2s uartf",
 109                 .mask = MT7620_GPIO_MODE_I2S_UARTF,
 110                 .gpio_first = 7,
 111                 .gpio_last = 14,
 112         }, {
 113                 .name = "pcm gpio",
 114                 .mask = MT7620_GPIO_MODE_PCM_GPIO,
 115                 .gpio_first = 11,
 116                 .gpio_last = 14,
 117         }, {
 118                 .name = "gpio uartf",
 119                 .mask = MT7620_GPIO_MODE_GPIO_UARTF,
 120                 .gpio_first = 7,
 121                 .gpio_last = 10,
 122         }, {
 123                 .name = "gpio i2s",
 124                 .mask = MT7620_GPIO_MODE_GPIO_I2S,
 125                 .gpio_first = 7,
 126                 .gpio_last = 10,
 127         }, {
 128                 .name = "gpio",
 129                 .mask = MT7620_GPIO_MODE_GPIO,
 130         }, {0}
 131 };
 132
 133 struct ralink_pinmux rt_gpio_pinmux = {
 134         .mode = mode_mux,
 135         .uart = uart_mux,
 136         .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
 137         .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
 138 };
 139
 140 static __init u32
 141 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 142 {
 143         u64 t;
 144
 145         t = ref_rate;
 146         t *= mul;
 147         do_div(t, div);
 148
 149         return t;
 150 }
 151
 152 #define MHZ(x)          ((x) * 1000 * 1000)
 153
 154 static __init unsigned long
 155 mt7620_get_xtal_rate(void)
 156 {
 157         u32 reg;
 158
 159         reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
 160         if (reg & SYSCFG0_XTAL_FREQ_SEL)
 161                 return MHZ(40);
 162
 163         return MHZ(20);
 164 }
 165
 166 static __init unsigned long
 167 mt7620_get_periph_rate(unsigned long xtal_rate)
 168 {
 169         u32 reg;
 170
 171         reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
 172         if (reg & CLKCFG0_PERI_CLK_SEL)
 173                 return xtal_rate;
 174
 175         return MHZ(40);
 176 }
 177
 178 static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
 179
 180 static __init unsigned long
 181 mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
 182 {
 183         u32 reg;
 184         u32 mul;
 185         u32 div;
 186
 187         reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
 188         if (reg & CPLL_CFG0_BYPASS_REF_CLK)
 189                 return xtal_rate;
 190
 191         if ((reg & CPLL_CFG0_SW_CFG) == 0)
 192                 return MHZ(600);
 193
 194         mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
 195               CPLL_CFG0_PLL_MULT_RATIO_MASK;
 196         mul += 24;
 197         if (reg & CPLL_CFG0_LC_CURFCK)
 198                 mul *= 2;
 199
 200         div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
 201               CPLL_CFG0_PLL_DIV_RATIO_MASK;
 202
 203         WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
 204
 205         return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
 206 }
 207
 208 static __init unsigned long
 209 mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
 210 {
 211         u32 reg;
 212
 213         reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
 214         if (reg & CPLL_CFG1_CPU_AUX1)
 215                 return xtal_rate;
 216
 217         if (reg & CPLL_CFG1_CPU_AUX0)
 218                 return MHZ(480);
 219
 220         return cpu_pll_rate;
 221 }
 222
 223 static __init unsigned long
 224 mt7620_get_cpu_rate(unsigned long pll_rate)
 225 {
 226         u32 reg;
 227         u32 mul;
 228         u32 div;
 229
 230         reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
 231
 232         mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
 233         div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
 234               CPU_SYS_CLKCFG_CPU_FDIV_MASK;
 235
 236         return mt7620_calc_rate(pll_rate, mul, div);
 237 }
 238
 239 static const u32 mt7620_ocp_dividers[16] __initconst = {
 240         [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
 241         [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
 242         [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
 243         [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
 244         [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
 245 };
 246
 247 static __init unsigned long
 248 mt7620_get_dram_rate(unsigned long pll_rate)
 249 {
 250         if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
 251                 return pll_rate / 4;
 252
 253         return pll_rate / 3;
 254 }
 255
 256 static __init unsigned long
 257 mt7620_get_sys_rate(unsigned long cpu_rate)
 258 {
 259         u32 reg;
 260         u32 ocp_ratio;
 261         u32 div;
 262
 263         reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
 264
 265         ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
 266                     CPU_SYS_CLKCFG_OCP_RATIO_MASK;
 267
 268         if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
 269                 return cpu_rate;
 270
 271         div = mt7620_ocp_dividers[ocp_ratio];
 272         if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
 273                 return cpu_rate;
 274
 275         return cpu_rate / div;
 276 }
 277
 278 void __init ralink_clk_init(void)
 279 {
 280         unsigned long xtal_rate;
 281         unsigned long cpu_pll_rate;
 282         unsigned long pll_rate;
 283         unsigned long cpu_rate;
 284         unsigned long sys_rate;
 285         unsigned long dram_rate;
 286         unsigned long periph_rate;
 287
 288         xtal_rate = mt7620_get_xtal_rate();
 289
 290         cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
 291         pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
 292
 293         cpu_rate = mt7620_get_cpu_rate(pll_rate);
 294         dram_rate = mt7620_get_dram_rate(pll_rate);
 295         sys_rate = mt7620_get_sys_rate(cpu_rate);
 296         periph_rate = mt7620_get_periph_rate(xtal_rate);
 297
 298 #define RFMT(label)     label ":%lu.%03luMHz "
 299 #define RINT(x)         ((x) / 1000000)
 300 #define RFRAC(x)        (((x) / 1000) % 1000)
 301
 302         pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
 303                  RINT(xtal_rate), RFRAC(xtal_rate),
 304                  RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
 305                  RINT(pll_rate), RFRAC(pll_rate));
 306
 307         pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
 308                  RINT(cpu_rate), RFRAC(cpu_rate),
 309                  RINT(dram_rate), RFRAC(dram_rate),
 310                  RINT(sys_rate), RFRAC(sys_rate),
 311                  RINT(periph_rate), RFRAC(periph_rate));
 312
 313 #undef RFRAC
 314 #undef RINT
 315 #undef RFMT
 316
 317         ralink_clk_add("cpu", cpu_rate);
 318         ralink_clk_add("10000100.timer", periph_rate);
 319         ralink_clk_add("10000120.watchdog", periph_rate);
 320         ralink_clk_add("10000500.uart", periph_rate);
 321         ralink_clk_add("10000b00.spi", sys_rate);
 322         ralink_clk_add("10000c00.uartlite", periph_rate);
 323 }
 324
 325 void __init ralink_of_remap(void)
 326 {
 327         rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
 328         rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
 329
 330         if (!rt_sysc_membase || !rt_memc_membase)
 331                 panic("Failed to remap core resources");
 332 }
 333
 334 void prom_soc_init(struct ralink_soc_info *soc_info)
 335 {
 336         void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
 337         unsigned char *name = NULL;
 338         u32 n0;
 339         u32 n1;
 340         u32 rev;
 341         u32 cfg0;
 342
 343         n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
 344         n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
 345
 346         if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
 347                 name = "MT7620N";
 348                 soc_info->compatible = "ralink,mt7620n-soc";
 349         } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
 350                 name = "MT7620A";
 351                 soc_info->compatible = "ralink,mt7620a-soc";
 352         } else {
 353                 panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
 354         }
 355
 356         rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
 357
 358         snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 359                 "Ralink %s ver:%u eco:%u",
 360                 name,
 361                 (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
 362                 (rev & CHIP_REV_ECO_MASK));
 363
 364         cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
 365         dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
 366
 367         switch (dram_type) {
 368         case SYSCFG0_DRAM_TYPE_SDRAM:
 369                 pr_info("Board has SDRAM\n");
 370                 soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
 371                 soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
 372                 break;
 373
 374         case SYSCFG0_DRAM_TYPE_DDR1:
 375                 pr_info("Board has DDR1\n");
 376                 soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
 377                 soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
 378                 break;
 379
 380         case SYSCFG0_DRAM_TYPE_DDR2:
 381                 pr_info("Board has DDR2\n");
 382                 soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
 383                 soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
 384                 break;
 385         default:
 386                 BUG();
 387         }
 388         soc_info->mem_base = MT7620_DRAM_BASE;
 389 }