2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/moduleparam.h>
20 #include <linux/rtnetlink.h>
21 #include <linux/pm_qos.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
33 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
34 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
35 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
36 #define IEEE80211_AUTH_MAX_TRIES 3
37 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
38 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
39 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
40 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
41 #define IEEE80211_ASSOC_MAX_TRIES 3
43 static int max_nullfunc_tries
= 2;
44 module_param(max_nullfunc_tries
, int, 0644);
45 MODULE_PARM_DESC(max_nullfunc_tries
,
46 "Maximum nullfunc tx tries before disconnecting (reason 4).");
48 static int max_probe_tries
= 5;
49 module_param(max_probe_tries
, int, 0644);
50 MODULE_PARM_DESC(max_probe_tries
,
51 "Maximum probe tries before disconnecting (reason 4).");
54 * Beacon loss timeout is calculated as N frames times the
55 * advertised beacon interval. This may need to be somewhat
56 * higher than what hardware might detect to account for
57 * delays in the host processing frames. But since we also
58 * probe on beacon miss before declaring the connection lost
59 * default to what we want.
61 static int beacon_loss_count
= 7;
62 module_param(beacon_loss_count
, int, 0644);
63 MODULE_PARM_DESC(beacon_loss_count
,
64 "Number of beacon intervals before we decide beacon was lost.");
67 * Time the connection can be idle before we probe
68 * it to see if we can still talk to the AP.
70 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
72 * Time we wait for a probe response after sending
73 * a probe request because of beacon loss or for
74 * checking the connection still works.
76 static int probe_wait_ms
= 500;
77 module_param(probe_wait_ms
, int, 0644);
78 MODULE_PARM_DESC(probe_wait_ms
,
79 "Maximum time(ms) to wait for probe response"
80 " before disconnecting (reason 4).");
83 * Weight given to the latest Beacon frame when calculating average signal
84 * strength for Beacon frames received in the current BSS. This must be
87 #define IEEE80211_SIGNAL_AVE_WEIGHT 3
90 * How many Beacon frames need to have been used in average signal strength
91 * before starting to indicate signal change events.
93 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
96 * We can have multiple work items (and connection probing)
97 * scheduling this timer, but we need to take care to only
98 * reschedule it when it should fire _earlier_ than it was
99 * asked for before, or if it's not pending right now. This
100 * function ensures that. Note that it then is required to
101 * run this function for all timeouts after the first one
102 * has happened -- the work that runs from this timer will
105 static void run_again(struct ieee80211_sub_if_data
*sdata
,
106 unsigned long timeout
)
108 sdata_assert_lock(sdata
);
110 if (!timer_pending(&sdata
->u
.mgd
.timer
) ||
111 time_before(timeout
, sdata
->u
.mgd
.timer
.expires
))
112 mod_timer(&sdata
->u
.mgd
.timer
, timeout
);
115 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data
*sdata
)
117 if (sdata
->vif
.driver_flags
& IEEE80211_VIF_BEACON_FILTER
)
120 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
123 mod_timer(&sdata
->u
.mgd
.bcn_mon_timer
,
124 round_jiffies_up(jiffies
+ sdata
->u
.mgd
.beacon_timeout
));
127 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data
*sdata
)
129 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
131 if (unlikely(!sdata
->u
.mgd
.associated
))
134 ifmgd
->probe_send_count
= 0;
136 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
139 mod_timer(&sdata
->u
.mgd
.conn_mon_timer
,
140 round_jiffies_up(jiffies
+ IEEE80211_CONNECTION_IDLE_TIME
));
143 static int ecw2cw(int ecw
)
145 return (1 << ecw
) - 1;
149 ieee80211_determine_chantype(struct ieee80211_sub_if_data
*sdata
,
150 struct ieee80211_supported_band
*sband
,
151 struct ieee80211_channel
*channel
,
152 const struct ieee80211_ht_operation
*ht_oper
,
153 const struct ieee80211_vht_operation
*vht_oper
,
154 struct cfg80211_chan_def
*chandef
, bool tracking
)
156 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
157 struct cfg80211_chan_def vht_chandef
;
160 chandef
->chan
= channel
;
161 chandef
->width
= NL80211_CHAN_WIDTH_20_NOHT
;
162 chandef
->center_freq1
= channel
->center_freq
;
163 chandef
->center_freq2
= 0;
165 if (!ht_oper
|| !sband
->ht_cap
.ht_supported
) {
166 ret
= IEEE80211_STA_DISABLE_HT
| IEEE80211_STA_DISABLE_VHT
;
170 chandef
->width
= NL80211_CHAN_WIDTH_20
;
172 ht_cfreq
= ieee80211_channel_to_frequency(ht_oper
->primary_chan
,
174 /* check that channel matches the right operating channel */
175 if (!tracking
&& channel
->center_freq
!= ht_cfreq
) {
177 * It's possible that some APs are confused here;
178 * Netgear WNDR3700 sometimes reports 4 higher than
179 * the actual channel in association responses, but
180 * since we look at probe response/beacon data here
184 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
185 channel
->center_freq
, ht_cfreq
,
186 ht_oper
->primary_chan
, channel
->band
);
187 ret
= IEEE80211_STA_DISABLE_HT
| IEEE80211_STA_DISABLE_VHT
;
191 /* check 40 MHz support, if we have it */
192 if (sband
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
) {
193 switch (ht_oper
->ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
194 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
195 chandef
->width
= NL80211_CHAN_WIDTH_40
;
196 chandef
->center_freq1
+= 10;
198 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
199 chandef
->width
= NL80211_CHAN_WIDTH_40
;
200 chandef
->center_freq1
-= 10;
204 /* 40 MHz (and 80 MHz) must be supported for VHT */
205 ret
= IEEE80211_STA_DISABLE_VHT
;
206 /* also mark 40 MHz disabled */
207 ret
|= IEEE80211_STA_DISABLE_40MHZ
;
211 if (!vht_oper
|| !sband
->vht_cap
.vht_supported
) {
212 ret
= IEEE80211_STA_DISABLE_VHT
;
216 vht_chandef
.chan
= channel
;
217 vht_chandef
.center_freq1
=
218 ieee80211_channel_to_frequency(vht_oper
->center_freq_seg1_idx
,
220 vht_chandef
.center_freq2
= 0;
222 switch (vht_oper
->chan_width
) {
223 case IEEE80211_VHT_CHANWIDTH_USE_HT
:
224 vht_chandef
.width
= chandef
->width
;
225 vht_chandef
.center_freq1
= chandef
->center_freq1
;
227 case IEEE80211_VHT_CHANWIDTH_80MHZ
:
228 vht_chandef
.width
= NL80211_CHAN_WIDTH_80
;
230 case IEEE80211_VHT_CHANWIDTH_160MHZ
:
231 vht_chandef
.width
= NL80211_CHAN_WIDTH_160
;
233 case IEEE80211_VHT_CHANWIDTH_80P80MHZ
:
234 vht_chandef
.width
= NL80211_CHAN_WIDTH_80P80
;
235 vht_chandef
.center_freq2
=
236 ieee80211_channel_to_frequency(
237 vht_oper
->center_freq_seg2_idx
,
241 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
243 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
244 vht_oper
->chan_width
);
245 ret
= IEEE80211_STA_DISABLE_VHT
;
249 if (!cfg80211_chandef_valid(&vht_chandef
)) {
250 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
252 "AP VHT information is invalid, disable VHT\n");
253 ret
= IEEE80211_STA_DISABLE_VHT
;
257 if (cfg80211_chandef_identical(chandef
, &vht_chandef
)) {
262 if (!cfg80211_chandef_compatible(chandef
, &vht_chandef
)) {
263 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
265 "AP VHT information doesn't match HT, disable VHT\n");
266 ret
= IEEE80211_STA_DISABLE_VHT
;
270 *chandef
= vht_chandef
;
276 * When tracking the current AP, don't do any further checks if the
277 * new chandef is identical to the one we're currently using for the
278 * connection. This keeps us from playing ping-pong with regulatory,
279 * without it the following can happen (for example):
280 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
281 * - AP advertises regdom US
282 * - CRDA loads regdom US with 80 MHz prohibited (old database)
283 * - the code below detects an unsupported channel, downgrades, and
284 * we disconnect from the AP in the caller
285 * - disconnect causes CRDA to reload world regdomain and the game
287 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
289 * It seems possible that there are still scenarios with CSA or real
290 * bandwidth changes where a this could happen, but those cases are
291 * less common and wouldn't completely prevent using the AP.
294 cfg80211_chandef_identical(chandef
, &sdata
->vif
.bss_conf
.chandef
))
297 /* don't print the message below for VHT mismatch if VHT is disabled */
298 if (ret
& IEEE80211_STA_DISABLE_VHT
)
299 vht_chandef
= *chandef
;
302 * Ignore the DISABLED flag when we're already connected and only
303 * tracking the APs beacon for bandwidth changes - otherwise we
304 * might get disconnected here if we connect to an AP, update our
305 * regulatory information based on the AP's country IE and the
306 * information we have is wrong/outdated and disables the channel
307 * that we're actually using for the connection to the AP.
309 while (!cfg80211_chandef_usable(sdata
->local
->hw
.wiphy
, chandef
,
311 IEEE80211_CHAN_DISABLED
)) {
312 if (WARN_ON(chandef
->width
== NL80211_CHAN_WIDTH_20_NOHT
)) {
313 ret
= IEEE80211_STA_DISABLE_HT
|
314 IEEE80211_STA_DISABLE_VHT
;
318 ret
|= ieee80211_chandef_downgrade(chandef
);
321 if (chandef
->width
!= vht_chandef
.width
&& !tracking
)
323 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
325 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef
));
329 static int ieee80211_config_bw(struct ieee80211_sub_if_data
*sdata
,
330 struct sta_info
*sta
,
331 const struct ieee80211_ht_operation
*ht_oper
,
332 const struct ieee80211_vht_operation
*vht_oper
,
333 const u8
*bssid
, u32
*changed
)
335 struct ieee80211_local
*local
= sdata
->local
;
336 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
337 struct ieee80211_supported_band
*sband
;
338 struct ieee80211_channel
*chan
;
339 struct cfg80211_chan_def chandef
;
342 enum ieee80211_sta_rx_bandwidth new_sta_bw
;
345 /* if HT was/is disabled, don't track any bandwidth changes */
346 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
|| !ht_oper
)
349 /* don't check VHT if we associated as non-VHT station */
350 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)
353 if (WARN_ON_ONCE(!sta
))
357 * if bss configuration changed store the new one -
358 * this may be applicable even if channel is identical
360 ht_opmode
= le16_to_cpu(ht_oper
->operation_mode
);
361 if (sdata
->vif
.bss_conf
.ht_operation_mode
!= ht_opmode
) {
362 *changed
|= BSS_CHANGED_HT
;
363 sdata
->vif
.bss_conf
.ht_operation_mode
= ht_opmode
;
366 chan
= sdata
->vif
.bss_conf
.chandef
.chan
;
367 sband
= local
->hw
.wiphy
->bands
[chan
->band
];
369 /* calculate new channel (type) based on HT/VHT operation IEs */
370 flags
= ieee80211_determine_chantype(sdata
, sband
, chan
, ht_oper
,
371 vht_oper
, &chandef
, true);
374 * Downgrade the new channel if we associated with restricted
375 * capabilities. For example, if we associated as a 20 MHz STA
376 * to a 40 MHz AP (due to regulatory, capabilities or config
377 * reasons) then switching to a 40 MHz channel now won't do us
378 * any good -- we couldn't use it with the AP.
380 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_80P80MHZ
&&
381 chandef
.width
== NL80211_CHAN_WIDTH_80P80
)
382 flags
|= ieee80211_chandef_downgrade(&chandef
);
383 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_160MHZ
&&
384 chandef
.width
== NL80211_CHAN_WIDTH_160
)
385 flags
|= ieee80211_chandef_downgrade(&chandef
);
386 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_40MHZ
&&
387 chandef
.width
> NL80211_CHAN_WIDTH_20
)
388 flags
|= ieee80211_chandef_downgrade(&chandef
);
390 if (cfg80211_chandef_identical(&chandef
, &sdata
->vif
.bss_conf
.chandef
))
394 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
395 ifmgd
->bssid
, chandef
.chan
->center_freq
, chandef
.width
,
396 chandef
.center_freq1
, chandef
.center_freq2
);
398 if (flags
!= (ifmgd
->flags
& (IEEE80211_STA_DISABLE_HT
|
399 IEEE80211_STA_DISABLE_VHT
|
400 IEEE80211_STA_DISABLE_40MHZ
|
401 IEEE80211_STA_DISABLE_80P80MHZ
|
402 IEEE80211_STA_DISABLE_160MHZ
)) ||
403 !cfg80211_chandef_valid(&chandef
)) {
405 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
410 switch (chandef
.width
) {
411 case NL80211_CHAN_WIDTH_20_NOHT
:
412 case NL80211_CHAN_WIDTH_20
:
413 new_sta_bw
= IEEE80211_STA_RX_BW_20
;
415 case NL80211_CHAN_WIDTH_40
:
416 new_sta_bw
= IEEE80211_STA_RX_BW_40
;
418 case NL80211_CHAN_WIDTH_80
:
419 new_sta_bw
= IEEE80211_STA_RX_BW_80
;
421 case NL80211_CHAN_WIDTH_80P80
:
422 case NL80211_CHAN_WIDTH_160
:
423 new_sta_bw
= IEEE80211_STA_RX_BW_160
;
429 if (new_sta_bw
> sta
->cur_max_bandwidth
)
430 new_sta_bw
= sta
->cur_max_bandwidth
;
432 if (new_sta_bw
< sta
->sta
.bandwidth
) {
433 sta
->sta
.bandwidth
= new_sta_bw
;
434 rate_control_rate_update(local
, sband
, sta
,
435 IEEE80211_RC_BW_CHANGED
);
438 ret
= ieee80211_vif_change_bandwidth(sdata
, &chandef
, changed
);
441 "AP %pM changed bandwidth to incompatible one - disconnect\n",
446 if (new_sta_bw
> sta
->sta
.bandwidth
) {
447 sta
->sta
.bandwidth
= new_sta_bw
;
448 rate_control_rate_update(local
, sband
, sta
,
449 IEEE80211_RC_BW_CHANGED
);
455 /* frame sending functions */
457 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data
*sdata
,
458 struct sk_buff
*skb
, u8 ap_ht_param
,
459 struct ieee80211_supported_band
*sband
,
460 struct ieee80211_channel
*channel
,
461 enum ieee80211_smps_mode smps
)
464 u32 flags
= channel
->flags
;
466 struct ieee80211_sta_ht_cap ht_cap
;
468 BUILD_BUG_ON(sizeof(ht_cap
) != sizeof(sband
->ht_cap
));
470 memcpy(&ht_cap
, &sband
->ht_cap
, sizeof(ht_cap
));
471 ieee80211_apply_htcap_overrides(sdata
, &ht_cap
);
473 /* determine capability flags */
476 switch (ap_ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
477 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
478 if (flags
& IEEE80211_CHAN_NO_HT40PLUS
) {
479 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
480 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
483 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
484 if (flags
& IEEE80211_CHAN_NO_HT40MINUS
) {
485 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
486 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
492 * If 40 MHz was disabled associate as though we weren't
493 * capable of 40 MHz -- some broken APs will never fall
494 * back to trying to transmit in 20 MHz.
496 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_40MHZ
) {
497 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
498 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
501 /* set SM PS mode properly */
502 cap
&= ~IEEE80211_HT_CAP_SM_PS
;
504 case IEEE80211_SMPS_AUTOMATIC
:
505 case IEEE80211_SMPS_NUM_MODES
:
507 case IEEE80211_SMPS_OFF
:
508 cap
|= WLAN_HT_CAP_SM_PS_DISABLED
<<
509 IEEE80211_HT_CAP_SM_PS_SHIFT
;
511 case IEEE80211_SMPS_STATIC
:
512 cap
|= WLAN_HT_CAP_SM_PS_STATIC
<<
513 IEEE80211_HT_CAP_SM_PS_SHIFT
;
515 case IEEE80211_SMPS_DYNAMIC
:
516 cap
|= WLAN_HT_CAP_SM_PS_DYNAMIC
<<
517 IEEE80211_HT_CAP_SM_PS_SHIFT
;
521 /* reserve and fill IE */
522 pos
= skb_put(skb
, sizeof(struct ieee80211_ht_cap
) + 2);
523 ieee80211_ie_build_ht_cap(pos
, &ht_cap
, cap
);
526 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data
*sdata
,
528 struct ieee80211_supported_band
*sband
,
529 struct ieee80211_vht_cap
*ap_vht_cap
)
533 struct ieee80211_sta_vht_cap vht_cap
;
534 u32 mask
, ap_bf_sts
, our_bf_sts
;
536 BUILD_BUG_ON(sizeof(vht_cap
) != sizeof(sband
->vht_cap
));
538 memcpy(&vht_cap
, &sband
->vht_cap
, sizeof(vht_cap
));
539 ieee80211_apply_vhtcap_overrides(sdata
, &vht_cap
);
541 /* determine capability flags */
544 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_80P80MHZ
) {
545 cap
&= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ
;
546 cap
|= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ
;
549 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_160MHZ
) {
550 cap
&= ~IEEE80211_VHT_CAP_SHORT_GI_160
;
551 cap
&= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ
;
555 * Some APs apparently get confused if our capabilities are better
556 * than theirs, so restrict what we advertise in the assoc request.
558 if (!(ap_vht_cap
->vht_cap_info
&
559 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
)))
560 cap
&= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
;
562 mask
= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK
;
564 ap_bf_sts
= le32_to_cpu(ap_vht_cap
->vht_cap_info
) & mask
;
565 our_bf_sts
= cap
& mask
;
567 if (ap_bf_sts
< our_bf_sts
) {
572 /* reserve and fill IE */
573 pos
= skb_put(skb
, sizeof(struct ieee80211_vht_cap
) + 2);
574 ieee80211_ie_build_vht_cap(pos
, &vht_cap
, cap
);
577 static void ieee80211_send_assoc(struct ieee80211_sub_if_data
*sdata
)
579 struct ieee80211_local
*local
= sdata
->local
;
580 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
581 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
583 struct ieee80211_mgmt
*mgmt
;
585 size_t offset
= 0, noffset
;
586 int i
, count
, rates_len
, supp_rates_len
, shift
;
588 struct ieee80211_supported_band
*sband
;
589 struct ieee80211_chanctx_conf
*chanctx_conf
;
590 struct ieee80211_channel
*chan
;
591 u32 rate_flags
, rates
= 0;
593 sdata_assert_lock(sdata
);
596 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
597 if (WARN_ON(!chanctx_conf
)) {
601 chan
= chanctx_conf
->def
.chan
;
602 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
604 sband
= local
->hw
.wiphy
->bands
[chan
->band
];
605 shift
= ieee80211_vif_get_shift(&sdata
->vif
);
607 if (assoc_data
->supp_rates_len
) {
609 * Get all rates supported by the device and the AP as
610 * some APs don't like getting a superset of their rates
611 * in the association request (e.g. D-Link DAP 1353 in
614 rates_len
= ieee80211_parse_bitrates(&chanctx_conf
->def
, sband
,
615 assoc_data
->supp_rates
,
616 assoc_data
->supp_rates_len
,
620 * In case AP not provide any supported rates information
621 * before association, we send information element(s) with
622 * all rates that we support.
625 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
626 if ((rate_flags
& sband
->bitrates
[i
].flags
)
634 skb
= alloc_skb(local
->hw
.extra_tx_headroom
+
635 sizeof(*mgmt
) + /* bit too much but doesn't matter */
636 2 + assoc_data
->ssid_len
+ /* SSID */
637 4 + rates_len
+ /* (extended) rates */
638 4 + /* power capability */
639 2 + 2 * sband
->n_channels
+ /* supported channels */
640 2 + sizeof(struct ieee80211_ht_cap
) + /* HT */
641 2 + sizeof(struct ieee80211_vht_cap
) + /* VHT */
642 assoc_data
->ie_len
+ /* extra IEs */
648 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
650 capab
= WLAN_CAPABILITY_ESS
;
652 if (sband
->band
== IEEE80211_BAND_2GHZ
) {
653 if (!(local
->hw
.flags
& IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE
))
654 capab
|= WLAN_CAPABILITY_SHORT_SLOT_TIME
;
655 if (!(local
->hw
.flags
& IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE
))
656 capab
|= WLAN_CAPABILITY_SHORT_PREAMBLE
;
659 if (assoc_data
->capability
& WLAN_CAPABILITY_PRIVACY
)
660 capab
|= WLAN_CAPABILITY_PRIVACY
;
662 if ((assoc_data
->capability
& WLAN_CAPABILITY_SPECTRUM_MGMT
) &&
663 (local
->hw
.flags
& IEEE80211_HW_SPECTRUM_MGMT
))
664 capab
|= WLAN_CAPABILITY_SPECTRUM_MGMT
;
666 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
668 memcpy(mgmt
->da
, assoc_data
->bss
->bssid
, ETH_ALEN
);
669 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
670 memcpy(mgmt
->bssid
, assoc_data
->bss
->bssid
, ETH_ALEN
);
672 if (!is_zero_ether_addr(assoc_data
->prev_bssid
)) {
674 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
675 IEEE80211_STYPE_REASSOC_REQ
);
676 mgmt
->u
.reassoc_req
.capab_info
= cpu_to_le16(capab
);
677 mgmt
->u
.reassoc_req
.listen_interval
=
678 cpu_to_le16(local
->hw
.conf
.listen_interval
);
679 memcpy(mgmt
->u
.reassoc_req
.current_ap
, assoc_data
->prev_bssid
,
683 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
684 IEEE80211_STYPE_ASSOC_REQ
);
685 mgmt
->u
.assoc_req
.capab_info
= cpu_to_le16(capab
);
686 mgmt
->u
.assoc_req
.listen_interval
=
687 cpu_to_le16(local
->hw
.conf
.listen_interval
);
691 pos
= skb_put(skb
, 2 + assoc_data
->ssid_len
);
692 *pos
++ = WLAN_EID_SSID
;
693 *pos
++ = assoc_data
->ssid_len
;
694 memcpy(pos
, assoc_data
->ssid
, assoc_data
->ssid_len
);
696 /* add all rates which were marked to be used above */
697 supp_rates_len
= rates_len
;
698 if (supp_rates_len
> 8)
701 pos
= skb_put(skb
, supp_rates_len
+ 2);
702 *pos
++ = WLAN_EID_SUPP_RATES
;
703 *pos
++ = supp_rates_len
;
706 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
707 if (BIT(i
) & rates
) {
708 int rate
= DIV_ROUND_UP(sband
->bitrates
[i
].bitrate
,
716 if (rates_len
> count
) {
717 pos
= skb_put(skb
, rates_len
- count
+ 2);
718 *pos
++ = WLAN_EID_EXT_SUPP_RATES
;
719 *pos
++ = rates_len
- count
;
721 for (i
++; i
< sband
->n_bitrates
; i
++) {
722 if (BIT(i
) & rates
) {
724 rate
= DIV_ROUND_UP(sband
->bitrates
[i
].bitrate
,
731 if (capab
& WLAN_CAPABILITY_SPECTRUM_MGMT
) {
732 /* 1. power capabilities */
733 pos
= skb_put(skb
, 4);
734 *pos
++ = WLAN_EID_PWR_CAPABILITY
;
736 *pos
++ = 0; /* min tx power */
738 *pos
++ = ieee80211_chandef_max_power(&chanctx_conf
->def
);
740 /* 2. supported channels */
741 /* TODO: get this in reg domain format */
742 pos
= skb_put(skb
, 2 * sband
->n_channels
+ 2);
743 *pos
++ = WLAN_EID_SUPPORTED_CHANNELS
;
744 *pos
++ = 2 * sband
->n_channels
;
745 for (i
= 0; i
< sband
->n_channels
; i
++) {
746 *pos
++ = ieee80211_frequency_to_channel(
747 sband
->channels
[i
].center_freq
);
748 *pos
++ = 1; /* one channel in the subband*/
752 /* if present, add any custom IEs that go before HT */
753 if (assoc_data
->ie_len
) {
754 static const u8 before_ht
[] = {
757 WLAN_EID_EXT_SUPP_RATES
,
758 WLAN_EID_PWR_CAPABILITY
,
759 WLAN_EID_SUPPORTED_CHANNELS
,
762 WLAN_EID_RRM_ENABLED_CAPABILITIES
,
763 WLAN_EID_MOBILITY_DOMAIN
,
764 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
766 noffset
= ieee80211_ie_split(assoc_data
->ie
, assoc_data
->ie_len
,
767 before_ht
, ARRAY_SIZE(before_ht
),
769 pos
= skb_put(skb
, noffset
- offset
);
770 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
774 if (WARN_ON_ONCE((ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
775 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)))
776 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
778 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
))
779 ieee80211_add_ht_ie(sdata
, skb
, assoc_data
->ap_ht_param
,
780 sband
, chan
, sdata
->smps_mode
);
782 /* if present, add any custom IEs that go before VHT */
783 if (assoc_data
->ie_len
) {
784 static const u8 before_vht
[] = {
787 WLAN_EID_EXT_SUPP_RATES
,
788 WLAN_EID_PWR_CAPABILITY
,
789 WLAN_EID_SUPPORTED_CHANNELS
,
792 WLAN_EID_RRM_ENABLED_CAPABILITIES
,
793 WLAN_EID_MOBILITY_DOMAIN
,
794 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
795 WLAN_EID_HT_CAPABILITY
,
796 WLAN_EID_BSS_COEX_2040
,
797 WLAN_EID_EXT_CAPABILITY
,
798 WLAN_EID_QOS_TRAFFIC_CAPA
,
799 WLAN_EID_TIM_BCAST_REQ
,
800 WLAN_EID_INTERWORKING
,
802 noffset
= ieee80211_ie_split(assoc_data
->ie
, assoc_data
->ie_len
,
803 before_vht
, ARRAY_SIZE(before_vht
),
805 pos
= skb_put(skb
, noffset
- offset
);
806 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
810 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
811 ieee80211_add_vht_ie(sdata
, skb
, sband
,
812 &assoc_data
->ap_vht_cap
);
814 /* if present, add any custom non-vendor IEs that go after HT */
815 if (assoc_data
->ie_len
) {
816 noffset
= ieee80211_ie_split_vendor(assoc_data
->ie
,
819 pos
= skb_put(skb
, noffset
- offset
);
820 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
824 if (assoc_data
->wmm
) {
825 if (assoc_data
->uapsd
) {
826 qos_info
= ifmgd
->uapsd_queues
;
827 qos_info
|= (ifmgd
->uapsd_max_sp_len
<<
828 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT
);
833 pos
= skb_put(skb
, 9);
834 *pos
++ = WLAN_EID_VENDOR_SPECIFIC
;
835 *pos
++ = 7; /* len */
836 *pos
++ = 0x00; /* Microsoft OUI 00:50:F2 */
839 *pos
++ = 2; /* WME */
840 *pos
++ = 0; /* WME info */
841 *pos
++ = 1; /* WME ver */
845 /* add any remaining custom (i.e. vendor specific here) IEs */
846 if (assoc_data
->ie_len
) {
847 noffset
= assoc_data
->ie_len
;
848 pos
= skb_put(skb
, noffset
- offset
);
849 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
852 drv_mgd_prepare_tx(local
, sdata
);
854 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
855 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
856 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
|
857 IEEE80211_TX_INTFL_MLME_CONN_TX
;
858 ieee80211_tx_skb(sdata
, skb
);
861 void ieee80211_send_pspoll(struct ieee80211_local
*local
,
862 struct ieee80211_sub_if_data
*sdata
)
864 struct ieee80211_pspoll
*pspoll
;
867 skb
= ieee80211_pspoll_get(&local
->hw
, &sdata
->vif
);
871 pspoll
= (struct ieee80211_pspoll
*) skb
->data
;
872 pspoll
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
874 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
875 ieee80211_tx_skb(sdata
, skb
);
878 void ieee80211_send_nullfunc(struct ieee80211_local
*local
,
879 struct ieee80211_sub_if_data
*sdata
,
883 struct ieee80211_hdr_3addr
*nullfunc
;
884 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
886 skb
= ieee80211_nullfunc_get(&local
->hw
, &sdata
->vif
);
890 nullfunc
= (struct ieee80211_hdr_3addr
*) skb
->data
;
892 nullfunc
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
894 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
895 IEEE80211_TX_INTFL_OFFCHAN_TX_OK
;
897 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
898 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
;
900 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
901 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_USE_MINRATE
;
903 ieee80211_tx_skb(sdata
, skb
);
906 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local
*local
,
907 struct ieee80211_sub_if_data
*sdata
)
910 struct ieee80211_hdr
*nullfunc
;
913 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
916 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ 30);
920 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
922 nullfunc
= (struct ieee80211_hdr
*) skb_put(skb
, 30);
923 memset(nullfunc
, 0, 30);
924 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_NULLFUNC
|
925 IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
926 nullfunc
->frame_control
= fc
;
927 memcpy(nullfunc
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
928 memcpy(nullfunc
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
929 memcpy(nullfunc
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
930 memcpy(nullfunc
->addr4
, sdata
->vif
.addr
, ETH_ALEN
);
932 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
933 ieee80211_tx_skb(sdata
, skb
);
936 /* spectrum management related things */
937 static void ieee80211_chswitch_work(struct work_struct
*work
)
939 struct ieee80211_sub_if_data
*sdata
=
940 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.chswitch_work
);
941 struct ieee80211_local
*local
= sdata
->local
;
942 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
946 if (!ieee80211_sdata_running(sdata
))
950 if (!ifmgd
->associated
)
953 mutex_lock(&local
->mtx
);
954 ret
= ieee80211_vif_change_channel(sdata
, &changed
);
955 mutex_unlock(&local
->mtx
);
958 "vif channel switch failed, disconnecting\n");
959 ieee80211_queue_work(&sdata
->local
->hw
,
960 &ifmgd
->csa_connection_drop_work
);
964 if (!local
->use_chanctx
) {
965 local
->_oper_chandef
= sdata
->csa_chandef
;
966 /* Call "hw_config" only if doing sw channel switch.
967 * Otherwise update the channel directly
969 if (!local
->ops
->channel_switch
)
970 ieee80211_hw_config(local
, 0);
972 local
->hw
.conf
.chandef
= local
->_oper_chandef
;
975 /* XXX: shouldn't really modify cfg80211-owned data! */
976 ifmgd
->associated
->channel
= sdata
->csa_chandef
.chan
;
978 /* XXX: wait for a beacon first? */
979 ieee80211_wake_queues_by_reason(&local
->hw
,
980 IEEE80211_MAX_QUEUE_MAP
,
981 IEEE80211_QUEUE_STOP_REASON_CSA
);
983 ieee80211_bss_info_change_notify(sdata
, changed
);
986 sdata
->vif
.csa_active
= false;
987 ifmgd
->flags
&= ~IEEE80211_STA_CSA_RECEIVED
;
991 void ieee80211_chswitch_done(struct ieee80211_vif
*vif
, bool success
)
993 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
994 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
996 trace_api_chswitch_done(sdata
, success
);
999 "driver channel switch failed, disconnecting\n");
1000 ieee80211_queue_work(&sdata
->local
->hw
,
1001 &ifmgd
->csa_connection_drop_work
);
1003 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
1006 EXPORT_SYMBOL(ieee80211_chswitch_done
);
1008 static void ieee80211_chswitch_timer(unsigned long data
)
1010 struct ieee80211_sub_if_data
*sdata
=
1011 (struct ieee80211_sub_if_data
*) data
;
1013 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.chswitch_work
);
1017 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data
*sdata
,
1018 u64 timestamp
, struct ieee802_11_elems
*elems
,
1021 struct ieee80211_local
*local
= sdata
->local
;
1022 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1023 struct cfg80211_bss
*cbss
= ifmgd
->associated
;
1024 struct ieee80211_chanctx
*chanctx
;
1025 enum ieee80211_band current_band
;
1026 struct ieee80211_csa_ie csa_ie
;
1029 sdata_assert_lock(sdata
);
1034 if (local
->scanning
)
1037 /* disregard subsequent announcements if we are already processing */
1038 if (ifmgd
->flags
& IEEE80211_STA_CSA_RECEIVED
)
1041 current_band
= cbss
->channel
->band
;
1042 memset(&csa_ie
, 0, sizeof(csa_ie
));
1043 res
= ieee80211_parse_ch_switch_ie(sdata
, elems
, beacon
, current_band
,
1045 ifmgd
->associated
->bssid
, &csa_ie
);
1047 ieee80211_queue_work(&local
->hw
,
1048 &ifmgd
->csa_connection_drop_work
);
1052 if (!cfg80211_chandef_usable(local
->hw
.wiphy
, &csa_ie
.chandef
,
1053 IEEE80211_CHAN_DISABLED
)) {
1055 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1056 ifmgd
->associated
->bssid
,
1057 csa_ie
.chandef
.chan
->center_freq
,
1058 csa_ie
.chandef
.width
, csa_ie
.chandef
.center_freq1
,
1059 csa_ie
.chandef
.center_freq2
);
1060 ieee80211_queue_work(&local
->hw
,
1061 &ifmgd
->csa_connection_drop_work
);
1065 ifmgd
->flags
|= IEEE80211_STA_CSA_RECEIVED
;
1067 mutex_lock(&local
->chanctx_mtx
);
1068 if (local
->use_chanctx
) {
1069 u32 num_chanctx
= 0;
1070 list_for_each_entry(chanctx
, &local
->chanctx_list
, list
)
1073 if (num_chanctx
> 1 ||
1074 !(local
->hw
.flags
& IEEE80211_HW_CHANCTX_STA_CSA
)) {
1076 "not handling chan-switch with channel contexts\n");
1077 ieee80211_queue_work(&local
->hw
,
1078 &ifmgd
->csa_connection_drop_work
);
1079 mutex_unlock(&local
->chanctx_mtx
);
1084 if (WARN_ON(!rcu_access_pointer(sdata
->vif
.chanctx_conf
))) {
1085 ieee80211_queue_work(&local
->hw
,
1086 &ifmgd
->csa_connection_drop_work
);
1087 mutex_unlock(&local
->chanctx_mtx
);
1090 chanctx
= container_of(rcu_access_pointer(sdata
->vif
.chanctx_conf
),
1091 struct ieee80211_chanctx
, conf
);
1092 if (chanctx
->refcount
> 1) {
1094 "channel switch with multiple interfaces on the same channel, disconnecting\n");
1095 ieee80211_queue_work(&local
->hw
,
1096 &ifmgd
->csa_connection_drop_work
);
1097 mutex_unlock(&local
->chanctx_mtx
);
1100 mutex_unlock(&local
->chanctx_mtx
);
1102 sdata
->csa_chandef
= csa_ie
.chandef
;
1103 sdata
->vif
.csa_active
= true;
1106 ieee80211_stop_queues_by_reason(&local
->hw
,
1107 IEEE80211_MAX_QUEUE_MAP
,
1108 IEEE80211_QUEUE_STOP_REASON_CSA
);
1110 if (local
->ops
->channel_switch
) {
1111 /* use driver's channel switch callback */
1112 struct ieee80211_channel_switch ch_switch
= {
1113 .timestamp
= timestamp
,
1114 .block_tx
= csa_ie
.mode
,
1115 .chandef
= csa_ie
.chandef
,
1116 .count
= csa_ie
.count
,
1119 drv_channel_switch(local
, &ch_switch
);
1123 /* channel switch handled in software */
1124 if (csa_ie
.count
<= 1)
1125 ieee80211_queue_work(&local
->hw
, &ifmgd
->chswitch_work
);
1127 mod_timer(&ifmgd
->chswitch_timer
,
1128 TU_TO_EXP_TIME(csa_ie
.count
* cbss
->beacon_interval
));
1131 static u32
ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
1132 struct ieee80211_channel
*channel
,
1133 const u8
*country_ie
, u8 country_ie_len
,
1134 const u8
*pwr_constr_elem
)
1136 struct ieee80211_country_ie_triplet
*triplet
;
1137 int chan
= ieee80211_frequency_to_channel(channel
->center_freq
);
1138 int i
, chan_pwr
, chan_increment
, new_ap_level
;
1139 bool have_chan_pwr
= false;
1142 if (country_ie_len
% 2 || country_ie_len
< IEEE80211_COUNTRY_IE_MIN_LEN
)
1145 triplet
= (void *)(country_ie
+ 3);
1146 country_ie_len
-= 3;
1148 switch (channel
->band
) {
1152 case IEEE80211_BAND_2GHZ
:
1153 case IEEE80211_BAND_60GHZ
:
1156 case IEEE80211_BAND_5GHZ
:
1162 while (country_ie_len
>= 3) {
1163 u8 first_channel
= triplet
->chans
.first_channel
;
1165 if (first_channel
>= IEEE80211_COUNTRY_EXTENSION_ID
)
1168 for (i
= 0; i
< triplet
->chans
.num_channels
; i
++) {
1169 if (first_channel
+ i
* chan_increment
== chan
) {
1170 have_chan_pwr
= true;
1171 chan_pwr
= triplet
->chans
.max_power
;
1180 country_ie_len
-= 3;
1186 new_ap_level
= max_t(int, 0, chan_pwr
- *pwr_constr_elem
);
1188 if (sdata
->ap_power_level
== new_ap_level
)
1192 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1193 new_ap_level
, chan_pwr
, *pwr_constr_elem
,
1194 sdata
->u
.mgd
.bssid
);
1195 sdata
->ap_power_level
= new_ap_level
;
1196 if (__ieee80211_recalc_txpower(sdata
))
1197 return BSS_CHANGED_TXPOWER
;
1202 static void ieee80211_enable_ps(struct ieee80211_local
*local
,
1203 struct ieee80211_sub_if_data
*sdata
)
1205 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
1208 * If we are scanning right now then the parameters will
1209 * take effect when scan finishes.
1211 if (local
->scanning
)
1214 if (conf
->dynamic_ps_timeout
> 0 &&
1215 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_PS
)) {
1216 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1217 msecs_to_jiffies(conf
->dynamic_ps_timeout
));
1219 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
1220 ieee80211_send_nullfunc(local
, sdata
, 1);
1222 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
1223 (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
))
1226 conf
->flags
|= IEEE80211_CONF_PS
;
1227 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1231 static void ieee80211_change_ps(struct ieee80211_local
*local
)
1233 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
1235 if (local
->ps_sdata
) {
1236 ieee80211_enable_ps(local
, local
->ps_sdata
);
1237 } else if (conf
->flags
& IEEE80211_CONF_PS
) {
1238 conf
->flags
&= ~IEEE80211_CONF_PS
;
1239 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1240 del_timer_sync(&local
->dynamic_ps_timer
);
1241 cancel_work_sync(&local
->dynamic_ps_enable_work
);
1245 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data
*sdata
)
1247 struct ieee80211_if_managed
*mgd
= &sdata
->u
.mgd
;
1248 struct sta_info
*sta
= NULL
;
1249 bool authorized
= false;
1251 if (!mgd
->powersave
)
1257 if (!mgd
->associated
)
1260 if (mgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
1263 if (!mgd
->have_beacon
)
1267 sta
= sta_info_get(sdata
, mgd
->bssid
);
1269 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
1275 /* need to hold RTNL or interface lock */
1276 void ieee80211_recalc_ps(struct ieee80211_local
*local
, s32 latency
)
1278 struct ieee80211_sub_if_data
*sdata
, *found
= NULL
;
1282 if (!(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_PS
)) {
1283 local
->ps_sdata
= NULL
;
1287 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1288 if (!ieee80211_sdata_running(sdata
))
1290 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
1291 /* If an AP vif is found, then disable PS
1292 * by setting the count to zero thereby setting
1298 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1304 if (count
== 1 && ieee80211_powersave_allowed(found
)) {
1308 latency
= pm_qos_request(PM_QOS_NETWORK_LATENCY
);
1310 beaconint_us
= ieee80211_tu_to_usec(
1311 found
->vif
.bss_conf
.beacon_int
);
1313 timeout
= local
->dynamic_ps_forced_timeout
;
1316 * Go to full PSM if the user configures a very low
1317 * latency requirement.
1318 * The 2000 second value is there for compatibility
1319 * until the PM_QOS_NETWORK_LATENCY is configured
1322 if (latency
> (1900 * USEC_PER_MSEC
) &&
1323 latency
!= (2000 * USEC_PER_SEC
))
1328 local
->hw
.conf
.dynamic_ps_timeout
= timeout
;
1330 if (beaconint_us
> latency
) {
1331 local
->ps_sdata
= NULL
;
1334 u8 dtimper
= found
->u
.mgd
.dtim_period
;
1336 /* If the TIM IE is invalid, pretend the value is 1 */
1339 else if (dtimper
> 1)
1340 maxslp
= min_t(int, dtimper
,
1341 latency
/ beaconint_us
);
1343 local
->hw
.conf
.max_sleep_period
= maxslp
;
1344 local
->hw
.conf
.ps_dtim_period
= dtimper
;
1345 local
->ps_sdata
= found
;
1348 local
->ps_sdata
= NULL
;
1351 ieee80211_change_ps(local
);
1354 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data
*sdata
)
1356 bool ps_allowed
= ieee80211_powersave_allowed(sdata
);
1358 if (sdata
->vif
.bss_conf
.ps
!= ps_allowed
) {
1359 sdata
->vif
.bss_conf
.ps
= ps_allowed
;
1360 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_PS
);
1364 void ieee80211_dynamic_ps_disable_work(struct work_struct
*work
)
1366 struct ieee80211_local
*local
=
1367 container_of(work
, struct ieee80211_local
,
1368 dynamic_ps_disable_work
);
1370 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
1371 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1372 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1375 ieee80211_wake_queues_by_reason(&local
->hw
,
1376 IEEE80211_MAX_QUEUE_MAP
,
1377 IEEE80211_QUEUE_STOP_REASON_PS
);
1380 void ieee80211_dynamic_ps_enable_work(struct work_struct
*work
)
1382 struct ieee80211_local
*local
=
1383 container_of(work
, struct ieee80211_local
,
1384 dynamic_ps_enable_work
);
1385 struct ieee80211_sub_if_data
*sdata
= local
->ps_sdata
;
1386 struct ieee80211_if_managed
*ifmgd
;
1387 unsigned long flags
;
1390 /* can only happen when PS was just disabled anyway */
1394 ifmgd
= &sdata
->u
.mgd
;
1396 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
)
1399 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
1400 /* don't enter PS if TX frames are pending */
1401 if (drv_tx_frames_pending(local
)) {
1402 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1404 local
->hw
.conf
.dynamic_ps_timeout
));
1409 * transmission can be stopped by others which leads to
1410 * dynamic_ps_timer expiry. Postpone the ps timer if it
1411 * is not the actual idle state.
1413 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
1414 for (q
= 0; q
< local
->hw
.queues
; q
++) {
1415 if (local
->queue_stop_reasons
[q
]) {
1416 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
1418 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1420 local
->hw
.conf
.dynamic_ps_timeout
));
1424 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
1427 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
1428 !(ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
1429 if (drv_tx_frames_pending(local
)) {
1430 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1432 local
->hw
.conf
.dynamic_ps_timeout
));
1434 ieee80211_send_nullfunc(local
, sdata
, 1);
1435 /* Flush to get the tx status of nullfunc frame */
1436 ieee80211_flush_queues(local
, sdata
);
1440 if (!((local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) &&
1441 (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)) ||
1442 (ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
1443 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
1444 local
->hw
.conf
.flags
|= IEEE80211_CONF_PS
;
1445 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1449 void ieee80211_dynamic_ps_timer(unsigned long data
)
1451 struct ieee80211_local
*local
= (void *) data
;
1453 if (local
->quiescing
|| local
->suspended
)
1456 ieee80211_queue_work(&local
->hw
, &local
->dynamic_ps_enable_work
);
1459 void ieee80211_dfs_cac_timer_work(struct work_struct
*work
)
1461 struct delayed_work
*delayed_work
=
1462 container_of(work
, struct delayed_work
, work
);
1463 struct ieee80211_sub_if_data
*sdata
=
1464 container_of(delayed_work
, struct ieee80211_sub_if_data
,
1465 dfs_cac_timer_work
);
1466 struct cfg80211_chan_def chandef
= sdata
->vif
.bss_conf
.chandef
;
1468 mutex_lock(&sdata
->local
->mtx
);
1469 if (sdata
->wdev
.cac_started
) {
1470 ieee80211_vif_release_channel(sdata
);
1471 cfg80211_cac_event(sdata
->dev
, &chandef
,
1472 NL80211_RADAR_CAC_FINISHED
,
1475 mutex_unlock(&sdata
->local
->mtx
);
1479 static bool ieee80211_sta_wmm_params(struct ieee80211_local
*local
,
1480 struct ieee80211_sub_if_data
*sdata
,
1481 const u8
*wmm_param
, size_t wmm_param_len
)
1483 struct ieee80211_tx_queue_params params
;
1484 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1488 u8 uapsd_queues
= 0;
1490 if (!local
->ops
->conf_tx
)
1493 if (local
->hw
.queues
< IEEE80211_NUM_ACS
)
1499 if (wmm_param_len
< 8 || wmm_param
[5] /* version */ != 1)
1502 if (ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
)
1503 uapsd_queues
= ifmgd
->uapsd_queues
;
1505 count
= wmm_param
[6] & 0x0f;
1506 if (count
== ifmgd
->wmm_last_param_set
)
1508 ifmgd
->wmm_last_param_set
= count
;
1510 pos
= wmm_param
+ 8;
1511 left
= wmm_param_len
- 8;
1513 memset(¶ms
, 0, sizeof(params
));
1516 for (; left
>= 4; left
-= 4, pos
+= 4) {
1517 int aci
= (pos
[0] >> 5) & 0x03;
1518 int acm
= (pos
[0] >> 4) & 0x01;
1526 sdata
->wmm_acm
|= BIT(1) | BIT(2); /* BK/- */
1527 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
)
1533 sdata
->wmm_acm
|= BIT(4) | BIT(5); /* CL/VI */
1534 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VI
)
1540 sdata
->wmm_acm
|= BIT(6) | BIT(7); /* VO/NC */
1541 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
)
1548 sdata
->wmm_acm
|= BIT(0) | BIT(3); /* BE/EE */
1549 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BE
)
1554 params
.aifs
= pos
[0] & 0x0f;
1555 params
.cw_max
= ecw2cw((pos
[1] & 0xf0) >> 4);
1556 params
.cw_min
= ecw2cw(pos
[1] & 0x0f);
1557 params
.txop
= get_unaligned_le16(pos
+ 2);
1559 params
.uapsd
= uapsd
;
1562 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
1564 params
.aifs
, params
.cw_min
, params
.cw_max
,
1565 params
.txop
, params
.uapsd
);
1566 sdata
->tx_conf
[queue
] = params
;
1567 if (drv_conf_tx(local
, sdata
, queue
, ¶ms
))
1569 "failed to set TX queue parameters for queue %d\n",
1573 /* enable WMM or activate new settings */
1574 sdata
->vif
.bss_conf
.qos
= true;
1578 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data
*sdata
)
1580 lockdep_assert_held(&sdata
->local
->mtx
);
1582 sdata
->u
.mgd
.flags
&= ~IEEE80211_STA_CONNECTION_POLL
;
1583 ieee80211_run_deferred_scan(sdata
->local
);
1586 static void ieee80211_stop_poll(struct ieee80211_sub_if_data
*sdata
)
1588 mutex_lock(&sdata
->local
->mtx
);
1589 __ieee80211_stop_poll(sdata
);
1590 mutex_unlock(&sdata
->local
->mtx
);
1593 static u32
ieee80211_handle_bss_capability(struct ieee80211_sub_if_data
*sdata
,
1594 u16 capab
, bool erp_valid
, u8 erp
)
1596 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1598 bool use_protection
;
1599 bool use_short_preamble
;
1600 bool use_short_slot
;
1603 use_protection
= (erp
& WLAN_ERP_USE_PROTECTION
) != 0;
1604 use_short_preamble
= (erp
& WLAN_ERP_BARKER_PREAMBLE
) == 0;
1606 use_protection
= false;
1607 use_short_preamble
= !!(capab
& WLAN_CAPABILITY_SHORT_PREAMBLE
);
1610 use_short_slot
= !!(capab
& WLAN_CAPABILITY_SHORT_SLOT_TIME
);
1611 if (ieee80211_get_sdata_band(sdata
) == IEEE80211_BAND_5GHZ
)
1612 use_short_slot
= true;
1614 if (use_protection
!= bss_conf
->use_cts_prot
) {
1615 bss_conf
->use_cts_prot
= use_protection
;
1616 changed
|= BSS_CHANGED_ERP_CTS_PROT
;
1619 if (use_short_preamble
!= bss_conf
->use_short_preamble
) {
1620 bss_conf
->use_short_preamble
= use_short_preamble
;
1621 changed
|= BSS_CHANGED_ERP_PREAMBLE
;
1624 if (use_short_slot
!= bss_conf
->use_short_slot
) {
1625 bss_conf
->use_short_slot
= use_short_slot
;
1626 changed
|= BSS_CHANGED_ERP_SLOT
;
1632 static void ieee80211_set_associated(struct ieee80211_sub_if_data
*sdata
,
1633 struct cfg80211_bss
*cbss
,
1634 u32 bss_info_changed
)
1636 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
1637 struct ieee80211_local
*local
= sdata
->local
;
1638 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1640 bss_info_changed
|= BSS_CHANGED_ASSOC
;
1641 bss_info_changed
|= ieee80211_handle_bss_capability(sdata
,
1642 bss_conf
->assoc_capability
, bss
->has_erp_value
, bss
->erp_value
);
1644 sdata
->u
.mgd
.beacon_timeout
= usecs_to_jiffies(ieee80211_tu_to_usec(
1645 beacon_loss_count
* bss_conf
->beacon_int
));
1647 sdata
->u
.mgd
.associated
= cbss
;
1648 memcpy(sdata
->u
.mgd
.bssid
, cbss
->bssid
, ETH_ALEN
);
1650 sdata
->u
.mgd
.flags
|= IEEE80211_STA_RESET_SIGNAL_AVE
;
1652 if (sdata
->vif
.p2p
) {
1653 const struct cfg80211_bss_ies
*ies
;
1656 ies
= rcu_dereference(cbss
->ies
);
1660 ret
= cfg80211_get_p2p_attr(
1661 ies
->data
, ies
->len
,
1662 IEEE80211_P2P_ATTR_ABSENCE_NOTICE
,
1663 (u8
*) &bss_conf
->p2p_noa_attr
,
1664 sizeof(bss_conf
->p2p_noa_attr
));
1666 sdata
->u
.mgd
.p2p_noa_index
=
1667 bss_conf
->p2p_noa_attr
.index
;
1668 bss_info_changed
|= BSS_CHANGED_P2P_PS
;
1674 /* just to be sure */
1675 ieee80211_stop_poll(sdata
);
1677 ieee80211_led_assoc(local
, 1);
1679 if (sdata
->u
.mgd
.have_beacon
) {
1681 * If the AP is buggy we may get here with no DTIM period
1682 * known, so assume it's 1 which is the only safe assumption
1683 * in that case, although if the TIM IE is broken powersave
1684 * probably just won't work at all.
1686 bss_conf
->dtim_period
= sdata
->u
.mgd
.dtim_period
?: 1;
1687 bss_conf
->beacon_rate
= bss
->beacon_rate
;
1688 bss_info_changed
|= BSS_CHANGED_BEACON_INFO
;
1690 bss_conf
->beacon_rate
= NULL
;
1691 bss_conf
->dtim_period
= 0;
1694 bss_conf
->assoc
= 1;
1696 /* Tell the driver to monitor connection quality (if supported) */
1697 if (sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_CQM_RSSI
&&
1698 bss_conf
->cqm_rssi_thold
)
1699 bss_info_changed
|= BSS_CHANGED_CQM
;
1701 /* Enable ARP filtering */
1702 if (bss_conf
->arp_addr_cnt
)
1703 bss_info_changed
|= BSS_CHANGED_ARP_FILTER
;
1705 ieee80211_bss_info_change_notify(sdata
, bss_info_changed
);
1707 mutex_lock(&local
->iflist_mtx
);
1708 ieee80211_recalc_ps(local
, -1);
1709 mutex_unlock(&local
->iflist_mtx
);
1711 ieee80211_recalc_smps(sdata
);
1712 ieee80211_recalc_ps_vif(sdata
);
1714 netif_carrier_on(sdata
->dev
);
1717 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data
*sdata
,
1718 u16 stype
, u16 reason
, bool tx
,
1721 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1722 struct ieee80211_local
*local
= sdata
->local
;
1725 sdata_assert_lock(sdata
);
1727 if (WARN_ON_ONCE(tx
&& !frame_buf
))
1730 if (WARN_ON(!ifmgd
->associated
))
1733 ieee80211_stop_poll(sdata
);
1735 ifmgd
->associated
= NULL
;
1736 netif_carrier_off(sdata
->dev
);
1739 * if we want to get out of ps before disassoc (why?) we have
1740 * to do it before sending disassoc, as otherwise the null-packet
1743 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
1744 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1745 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1747 local
->ps_sdata
= NULL
;
1749 /* disable per-vif ps */
1750 ieee80211_recalc_ps_vif(sdata
);
1752 /* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
1754 ieee80211_flush_queues(local
, sdata
);
1756 /* deauthenticate/disassociate now */
1757 if (tx
|| frame_buf
)
1758 ieee80211_send_deauth_disassoc(sdata
, ifmgd
->bssid
, stype
,
1759 reason
, tx
, frame_buf
);
1761 /* flush out frame */
1763 ieee80211_flush_queues(local
, sdata
);
1765 /* clear bssid only after building the needed mgmt frames */
1766 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
1768 /* remove AP and TDLS peers */
1769 sta_info_flush(sdata
);
1771 /* finally reset all BSS / config parameters */
1772 changed
|= ieee80211_reset_erp_info(sdata
);
1774 ieee80211_led_assoc(local
, 0);
1775 changed
|= BSS_CHANGED_ASSOC
;
1776 sdata
->vif
.bss_conf
.assoc
= false;
1778 ifmgd
->p2p_noa_index
= -1;
1779 memset(&sdata
->vif
.bss_conf
.p2p_noa_attr
, 0,
1780 sizeof(sdata
->vif
.bss_conf
.p2p_noa_attr
));
1782 /* on the next assoc, re-program HT/VHT parameters */
1783 memset(&ifmgd
->ht_capa
, 0, sizeof(ifmgd
->ht_capa
));
1784 memset(&ifmgd
->ht_capa_mask
, 0, sizeof(ifmgd
->ht_capa_mask
));
1785 memset(&ifmgd
->vht_capa
, 0, sizeof(ifmgd
->vht_capa
));
1786 memset(&ifmgd
->vht_capa_mask
, 0, sizeof(ifmgd
->vht_capa_mask
));
1788 sdata
->ap_power_level
= IEEE80211_UNSET_POWER_LEVEL
;
1790 del_timer_sync(&local
->dynamic_ps_timer
);
1791 cancel_work_sync(&local
->dynamic_ps_enable_work
);
1793 /* Disable ARP filtering */
1794 if (sdata
->vif
.bss_conf
.arp_addr_cnt
)
1795 changed
|= BSS_CHANGED_ARP_FILTER
;
1797 sdata
->vif
.bss_conf
.qos
= false;
1798 changed
|= BSS_CHANGED_QOS
;
1800 /* The BSSID (not really interesting) and HT changed */
1801 changed
|= BSS_CHANGED_BSSID
| BSS_CHANGED_HT
;
1802 ieee80211_bss_info_change_notify(sdata
, changed
);
1804 /* disassociated - set to defaults now */
1805 ieee80211_set_wmm_default(sdata
, false);
1807 del_timer_sync(&sdata
->u
.mgd
.conn_mon_timer
);
1808 del_timer_sync(&sdata
->u
.mgd
.bcn_mon_timer
);
1809 del_timer_sync(&sdata
->u
.mgd
.timer
);
1810 del_timer_sync(&sdata
->u
.mgd
.chswitch_timer
);
1812 sdata
->vif
.bss_conf
.dtim_period
= 0;
1813 sdata
->vif
.bss_conf
.beacon_rate
= NULL
;
1815 ifmgd
->have_beacon
= false;
1818 mutex_lock(&local
->mtx
);
1819 ieee80211_vif_release_channel(sdata
);
1820 mutex_unlock(&local
->mtx
);
1822 sdata
->encrypt_headroom
= IEEE80211_ENCRYPT_HEADROOM
;
1825 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data
*sdata
,
1826 struct ieee80211_hdr
*hdr
)
1829 * We can postpone the mgd.timer whenever receiving unicast frames
1830 * from AP because we know that the connection is working both ways
1831 * at that time. But multicast frames (and hence also beacons) must
1832 * be ignored here, because we need to trigger the timer during
1833 * data idle periods for sending the periodic probe request to the
1834 * AP we're connected to.
1836 if (is_multicast_ether_addr(hdr
->addr1
))
1839 ieee80211_sta_reset_conn_monitor(sdata
);
1842 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data
*sdata
)
1844 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1845 struct ieee80211_local
*local
= sdata
->local
;
1847 mutex_lock(&local
->mtx
);
1848 if (!(ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
))
1851 __ieee80211_stop_poll(sdata
);
1853 mutex_lock(&local
->iflist_mtx
);
1854 ieee80211_recalc_ps(local
, -1);
1855 mutex_unlock(&local
->iflist_mtx
);
1857 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
1861 * We've received a probe response, but are not sure whether
1862 * we have or will be receiving any beacons or data, so let's
1863 * schedule the timers again, just in case.
1865 ieee80211_sta_reset_beacon_monitor(sdata
);
1867 mod_timer(&ifmgd
->conn_mon_timer
,
1868 round_jiffies_up(jiffies
+
1869 IEEE80211_CONNECTION_IDLE_TIME
));
1871 mutex_unlock(&local
->mtx
);
1874 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data
*sdata
,
1875 struct ieee80211_hdr
*hdr
, bool ack
)
1877 if (!ieee80211_is_data(hdr
->frame_control
))
1880 if (ieee80211_is_nullfunc(hdr
->frame_control
) &&
1881 sdata
->u
.mgd
.probe_send_count
> 0) {
1883 ieee80211_sta_reset_conn_monitor(sdata
);
1885 sdata
->u
.mgd
.nullfunc_failed
= true;
1886 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
1891 ieee80211_sta_reset_conn_monitor(sdata
);
1894 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data
*sdata
)
1896 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1898 u8
*dst
= ifmgd
->associated
->bssid
;
1899 u8 unicast_limit
= max(1, max_probe_tries
- 3);
1902 * Try sending broadcast probe requests for the last three
1903 * probe requests after the first ones failed since some
1904 * buggy APs only support broadcast probe requests.
1906 if (ifmgd
->probe_send_count
>= unicast_limit
)
1910 * When the hardware reports an accurate Tx ACK status, it's
1911 * better to send a nullfunc frame instead of a probe request,
1912 * as it will kick us off the AP quickly if we aren't associated
1913 * anymore. The timeout will be reset if the frame is ACKed by
1916 ifmgd
->probe_send_count
++;
1918 if (sdata
->local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) {
1919 ifmgd
->nullfunc_failed
= false;
1920 ieee80211_send_nullfunc(sdata
->local
, sdata
, 0);
1925 ssid
= ieee80211_bss_get_ie(ifmgd
->associated
, WLAN_EID_SSID
);
1926 if (WARN_ON_ONCE(ssid
== NULL
))
1931 ieee80211_send_probe_req(sdata
, dst
, ssid
+ 2, ssid_len
, NULL
,
1932 0, (u32
) -1, true, 0,
1933 ifmgd
->associated
->channel
, false);
1937 ifmgd
->probe_timeout
= jiffies
+ msecs_to_jiffies(probe_wait_ms
);
1938 run_again(sdata
, ifmgd
->probe_timeout
);
1939 if (sdata
->local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
1940 ieee80211_flush_queues(sdata
->local
, sdata
);
1943 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data
*sdata
,
1946 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1947 bool already
= false;
1949 if (!ieee80211_sdata_running(sdata
))
1954 if (!ifmgd
->associated
)
1957 mutex_lock(&sdata
->local
->mtx
);
1959 if (sdata
->local
->tmp_channel
|| sdata
->local
->scanning
) {
1960 mutex_unlock(&sdata
->local
->mtx
);
1965 mlme_dbg_ratelimited(sdata
,
1966 "detected beacon loss from AP (missed %d beacons) - probing\n",
1969 ieee80211_cqm_rssi_notify(&sdata
->vif
,
1970 NL80211_CQM_RSSI_BEACON_LOSS_EVENT
,
1975 * The driver/our work has already reported this event or the
1976 * connection monitoring has kicked in and we have already sent
1977 * a probe request. Or maybe the AP died and the driver keeps
1978 * reporting until we disassociate...
1980 * In either case we have to ignore the current call to this
1981 * function (except for setting the correct probe reason bit)
1982 * because otherwise we would reset the timer every time and
1983 * never check whether we received a probe response!
1985 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
1988 ifmgd
->flags
|= IEEE80211_STA_CONNECTION_POLL
;
1990 mutex_unlock(&sdata
->local
->mtx
);
1995 mutex_lock(&sdata
->local
->iflist_mtx
);
1996 ieee80211_recalc_ps(sdata
->local
, -1);
1997 mutex_unlock(&sdata
->local
->iflist_mtx
);
1999 ifmgd
->probe_send_count
= 0;
2000 ieee80211_mgd_probe_ap_send(sdata
);
2002 sdata_unlock(sdata
);
2005 struct sk_buff
*ieee80211_ap_probereq_get(struct ieee80211_hw
*hw
,
2006 struct ieee80211_vif
*vif
)
2008 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2009 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2010 struct cfg80211_bss
*cbss
;
2011 struct sk_buff
*skb
;
2015 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
2018 sdata_assert_lock(sdata
);
2020 if (ifmgd
->associated
)
2021 cbss
= ifmgd
->associated
;
2022 else if (ifmgd
->auth_data
)
2023 cbss
= ifmgd
->auth_data
->bss
;
2024 else if (ifmgd
->assoc_data
)
2025 cbss
= ifmgd
->assoc_data
->bss
;
2030 ssid
= ieee80211_bss_get_ie(cbss
, WLAN_EID_SSID
);
2031 if (WARN_ON_ONCE(ssid
== NULL
))
2036 skb
= ieee80211_build_probe_req(sdata
, cbss
->bssid
,
2037 (u32
) -1, cbss
->channel
,
2044 EXPORT_SYMBOL(ieee80211_ap_probereq_get
);
2046 static void __ieee80211_disconnect(struct ieee80211_sub_if_data
*sdata
)
2048 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2049 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
2052 if (!ifmgd
->associated
) {
2053 sdata_unlock(sdata
);
2057 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
2058 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
2060 ifmgd
->flags
&= ~IEEE80211_STA_CSA_RECEIVED
;
2061 sdata
->vif
.csa_active
= false;
2062 ieee80211_wake_queues_by_reason(&sdata
->local
->hw
,
2063 IEEE80211_MAX_QUEUE_MAP
,
2064 IEEE80211_QUEUE_STOP_REASON_CSA
);
2066 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
2067 IEEE80211_DEAUTH_FRAME_LEN
);
2068 sdata_unlock(sdata
);
2071 static void ieee80211_beacon_connection_loss_work(struct work_struct
*work
)
2073 struct ieee80211_sub_if_data
*sdata
=
2074 container_of(work
, struct ieee80211_sub_if_data
,
2075 u
.mgd
.beacon_connection_loss_work
);
2076 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2077 struct sta_info
*sta
;
2079 if (ifmgd
->associated
) {
2081 sta
= sta_info_get(sdata
, ifmgd
->bssid
);
2083 sta
->beacon_loss_count
++;
2087 if (ifmgd
->connection_loss
) {
2088 sdata_info(sdata
, "Connection to AP %pM lost\n",
2090 __ieee80211_disconnect(sdata
);
2092 ieee80211_mgd_probe_ap(sdata
, true);
2096 static void ieee80211_csa_connection_drop_work(struct work_struct
*work
)
2098 struct ieee80211_sub_if_data
*sdata
=
2099 container_of(work
, struct ieee80211_sub_if_data
,
2100 u
.mgd
.csa_connection_drop_work
);
2102 __ieee80211_disconnect(sdata
);
2105 void ieee80211_beacon_loss(struct ieee80211_vif
*vif
)
2107 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2108 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
2110 trace_api_beacon_loss(sdata
);
2112 sdata
->u
.mgd
.connection_loss
= false;
2113 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
2115 EXPORT_SYMBOL(ieee80211_beacon_loss
);
2117 void ieee80211_connection_loss(struct ieee80211_vif
*vif
)
2119 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2120 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
2122 trace_api_connection_loss(sdata
);
2124 sdata
->u
.mgd
.connection_loss
= true;
2125 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
2127 EXPORT_SYMBOL(ieee80211_connection_loss
);
2130 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data
*sdata
,
2133 struct ieee80211_mgd_auth_data
*auth_data
= sdata
->u
.mgd
.auth_data
;
2135 sdata_assert_lock(sdata
);
2138 sta_info_destroy_addr(sdata
, auth_data
->bss
->bssid
);
2140 memset(sdata
->u
.mgd
.bssid
, 0, ETH_ALEN
);
2141 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
2142 sdata
->u
.mgd
.flags
= 0;
2143 mutex_lock(&sdata
->local
->mtx
);
2144 ieee80211_vif_release_channel(sdata
);
2145 mutex_unlock(&sdata
->local
->mtx
);
2148 cfg80211_put_bss(sdata
->local
->hw
.wiphy
, auth_data
->bss
);
2150 sdata
->u
.mgd
.auth_data
= NULL
;
2153 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data
*sdata
,
2154 struct ieee80211_mgmt
*mgmt
, size_t len
)
2156 struct ieee80211_local
*local
= sdata
->local
;
2157 struct ieee80211_mgd_auth_data
*auth_data
= sdata
->u
.mgd
.auth_data
;
2159 struct ieee802_11_elems elems
;
2162 pos
= mgmt
->u
.auth
.variable
;
2163 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2164 if (!elems
.challenge
)
2166 auth_data
->expected_transaction
= 4;
2167 drv_mgd_prepare_tx(sdata
->local
, sdata
);
2168 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
2169 tx_flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
2170 IEEE80211_TX_INTFL_MLME_CONN_TX
;
2171 ieee80211_send_auth(sdata
, 3, auth_data
->algorithm
, 0,
2172 elems
.challenge
- 2, elems
.challenge_len
+ 2,
2173 auth_data
->bss
->bssid
, auth_data
->bss
->bssid
,
2174 auth_data
->key
, auth_data
->key_len
,
2175 auth_data
->key_idx
, tx_flags
);
2178 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data
*sdata
,
2179 struct ieee80211_mgmt
*mgmt
, size_t len
)
2181 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2183 u16 auth_alg
, auth_transaction
, status_code
;
2184 struct sta_info
*sta
;
2186 sdata_assert_lock(sdata
);
2191 if (!ifmgd
->auth_data
|| ifmgd
->auth_data
->done
)
2194 memcpy(bssid
, ifmgd
->auth_data
->bss
->bssid
, ETH_ALEN
);
2196 if (!ether_addr_equal(bssid
, mgmt
->bssid
))
2199 auth_alg
= le16_to_cpu(mgmt
->u
.auth
.auth_alg
);
2200 auth_transaction
= le16_to_cpu(mgmt
->u
.auth
.auth_transaction
);
2201 status_code
= le16_to_cpu(mgmt
->u
.auth
.status_code
);
2203 if (auth_alg
!= ifmgd
->auth_data
->algorithm
||
2204 auth_transaction
!= ifmgd
->auth_data
->expected_transaction
) {
2205 sdata_info(sdata
, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2206 mgmt
->sa
, auth_alg
, ifmgd
->auth_data
->algorithm
,
2208 ifmgd
->auth_data
->expected_transaction
);
2212 if (status_code
!= WLAN_STATUS_SUCCESS
) {
2213 sdata_info(sdata
, "%pM denied authentication (status %d)\n",
2214 mgmt
->sa
, status_code
);
2215 ieee80211_destroy_auth_data(sdata
, false);
2216 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2220 switch (ifmgd
->auth_data
->algorithm
) {
2221 case WLAN_AUTH_OPEN
:
2222 case WLAN_AUTH_LEAP
:
2226 case WLAN_AUTH_SHARED_KEY
:
2227 if (ifmgd
->auth_data
->expected_transaction
!= 4) {
2228 ieee80211_auth_challenge(sdata
, mgmt
, len
);
2229 /* need another frame */
2234 WARN_ONCE(1, "invalid auth alg %d",
2235 ifmgd
->auth_data
->algorithm
);
2239 sdata_info(sdata
, "authenticated\n");
2240 ifmgd
->auth_data
->done
= true;
2241 ifmgd
->auth_data
->timeout
= jiffies
+ IEEE80211_AUTH_WAIT_ASSOC
;
2242 ifmgd
->auth_data
->timeout_started
= true;
2243 run_again(sdata
, ifmgd
->auth_data
->timeout
);
2245 if (ifmgd
->auth_data
->algorithm
== WLAN_AUTH_SAE
&&
2246 ifmgd
->auth_data
->expected_transaction
!= 2) {
2248 * Report auth frame to user space for processing since another
2249 * round of Authentication frames is still needed.
2251 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2255 /* move station state to auth */
2256 mutex_lock(&sdata
->local
->sta_mtx
);
2257 sta
= sta_info_get(sdata
, bssid
);
2259 WARN_ONCE(1, "%s: STA %pM not found", sdata
->name
, bssid
);
2262 if (sta_info_move_state(sta
, IEEE80211_STA_AUTH
)) {
2263 sdata_info(sdata
, "failed moving %pM to auth\n", bssid
);
2266 mutex_unlock(&sdata
->local
->sta_mtx
);
2268 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2271 mutex_unlock(&sdata
->local
->sta_mtx
);
2272 /* ignore frame -- wait for timeout */
2275 #define case_WLAN(type) \
2276 case WLAN_REASON_##type: return #type
2278 static const char *ieee80211_get_reason_code_string(u16 reason_code
)
2280 switch (reason_code
) {
2281 case_WLAN(UNSPECIFIED
);
2282 case_WLAN(PREV_AUTH_NOT_VALID
);
2283 case_WLAN(DEAUTH_LEAVING
);
2284 case_WLAN(DISASSOC_DUE_TO_INACTIVITY
);
2285 case_WLAN(DISASSOC_AP_BUSY
);
2286 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA
);
2287 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA
);
2288 case_WLAN(DISASSOC_STA_HAS_LEFT
);
2289 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH
);
2290 case_WLAN(DISASSOC_BAD_POWER
);
2291 case_WLAN(DISASSOC_BAD_SUPP_CHAN
);
2292 case_WLAN(INVALID_IE
);
2293 case_WLAN(MIC_FAILURE
);
2294 case_WLAN(4WAY_HANDSHAKE_TIMEOUT
);
2295 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT
);
2296 case_WLAN(IE_DIFFERENT
);
2297 case_WLAN(INVALID_GROUP_CIPHER
);
2298 case_WLAN(INVALID_PAIRWISE_CIPHER
);
2299 case_WLAN(INVALID_AKMP
);
2300 case_WLAN(UNSUPP_RSN_VERSION
);
2301 case_WLAN(INVALID_RSN_IE_CAP
);
2302 case_WLAN(IEEE8021X_FAILED
);
2303 case_WLAN(CIPHER_SUITE_REJECTED
);
2304 case_WLAN(DISASSOC_UNSPECIFIED_QOS
);
2305 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH
);
2306 case_WLAN(DISASSOC_LOW_ACK
);
2307 case_WLAN(DISASSOC_QAP_EXCEED_TXOP
);
2308 case_WLAN(QSTA_LEAVE_QBSS
);
2309 case_WLAN(QSTA_NOT_USE
);
2310 case_WLAN(QSTA_REQUIRE_SETUP
);
2311 case_WLAN(QSTA_TIMEOUT
);
2312 case_WLAN(QSTA_CIPHER_NOT_SUPP
);
2313 case_WLAN(MESH_PEER_CANCELED
);
2314 case_WLAN(MESH_MAX_PEERS
);
2315 case_WLAN(MESH_CONFIG
);
2316 case_WLAN(MESH_CLOSE
);
2317 case_WLAN(MESH_MAX_RETRIES
);
2318 case_WLAN(MESH_CONFIRM_TIMEOUT
);
2319 case_WLAN(MESH_INVALID_GTK
);
2320 case_WLAN(MESH_INCONSISTENT_PARAM
);
2321 case_WLAN(MESH_INVALID_SECURITY
);
2322 case_WLAN(MESH_PATH_ERROR
);
2323 case_WLAN(MESH_PATH_NOFORWARD
);
2324 case_WLAN(MESH_PATH_DEST_UNREACHABLE
);
2325 case_WLAN(MAC_EXISTS_IN_MBSS
);
2326 case_WLAN(MESH_CHAN_REGULATORY
);
2327 case_WLAN(MESH_CHAN
);
2328 default: return "<unknown>";
2332 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data
*sdata
,
2333 struct ieee80211_mgmt
*mgmt
, size_t len
)
2335 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2336 const u8
*bssid
= NULL
;
2339 sdata_assert_lock(sdata
);
2344 if (!ifmgd
->associated
||
2345 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2348 bssid
= ifmgd
->associated
->bssid
;
2350 reason_code
= le16_to_cpu(mgmt
->u
.deauth
.reason_code
);
2352 sdata_info(sdata
, "deauthenticated from %pM (Reason: %u=%s)\n",
2353 bssid
, reason_code
, ieee80211_get_reason_code_string(reason_code
));
2355 ieee80211_set_disassoc(sdata
, 0, 0, false, NULL
);
2357 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2361 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data
*sdata
,
2362 struct ieee80211_mgmt
*mgmt
, size_t len
)
2364 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2367 sdata_assert_lock(sdata
);
2372 if (!ifmgd
->associated
||
2373 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2376 reason_code
= le16_to_cpu(mgmt
->u
.disassoc
.reason_code
);
2378 sdata_info(sdata
, "disassociated from %pM (Reason: %u)\n",
2379 mgmt
->sa
, reason_code
);
2381 ieee80211_set_disassoc(sdata
, 0, 0, false, NULL
);
2383 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2386 static void ieee80211_get_rates(struct ieee80211_supported_band
*sband
,
2387 u8
*supp_rates
, unsigned int supp_rates_len
,
2388 u32
*rates
, u32
*basic_rates
,
2389 bool *have_higher_than_11mbit
,
2390 int *min_rate
, int *min_rate_index
,
2391 int shift
, u32 rate_flags
)
2395 for (i
= 0; i
< supp_rates_len
; i
++) {
2396 int rate
= supp_rates
[i
] & 0x7f;
2397 bool is_basic
= !!(supp_rates
[i
] & 0x80);
2399 if ((rate
* 5 * (1 << shift
)) > 110)
2400 *have_higher_than_11mbit
= true;
2403 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2404 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2406 * Note: Even through the membership selector and the basic
2407 * rate flag share the same bit, they are not exactly
2410 if (!!(supp_rates
[i
] & 0x80) &&
2411 (supp_rates
[i
] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY
)
2414 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
2415 struct ieee80211_rate
*br
;
2418 br
= &sband
->bitrates
[j
];
2419 if ((rate_flags
& br
->flags
) != rate_flags
)
2422 brate
= DIV_ROUND_UP(br
->bitrate
, (1 << shift
) * 5);
2423 if (brate
== rate
) {
2426 *basic_rates
|= BIT(j
);
2427 if ((rate
* 5) < *min_rate
) {
2428 *min_rate
= rate
* 5;
2429 *min_rate_index
= j
;
2437 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data
*sdata
,
2440 struct ieee80211_mgd_assoc_data
*assoc_data
= sdata
->u
.mgd
.assoc_data
;
2442 sdata_assert_lock(sdata
);
2445 sta_info_destroy_addr(sdata
, assoc_data
->bss
->bssid
);
2447 memset(sdata
->u
.mgd
.bssid
, 0, ETH_ALEN
);
2448 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
2449 sdata
->u
.mgd
.flags
= 0;
2450 mutex_lock(&sdata
->local
->mtx
);
2451 ieee80211_vif_release_channel(sdata
);
2452 mutex_unlock(&sdata
->local
->mtx
);
2456 sdata
->u
.mgd
.assoc_data
= NULL
;
2459 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data
*sdata
,
2460 struct cfg80211_bss
*cbss
,
2461 struct ieee80211_mgmt
*mgmt
, size_t len
)
2463 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2464 struct ieee80211_local
*local
= sdata
->local
;
2465 struct ieee80211_supported_band
*sband
;
2466 struct sta_info
*sta
;
2468 u16 capab_info
, aid
;
2469 struct ieee802_11_elems elems
;
2470 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
2471 const struct cfg80211_bss_ies
*bss_ies
= NULL
;
2472 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
2477 /* AssocResp and ReassocResp have identical structure */
2479 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
2480 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
2482 if ((aid
& (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2483 sdata_info(sdata
, "invalid AID value 0x%x; bits 15:14 not set\n",
2485 aid
&= ~(BIT(15) | BIT(14));
2487 ifmgd
->broken_ap
= false;
2489 if (aid
== 0 || aid
> IEEE80211_MAX_AID
) {
2490 sdata_info(sdata
, "invalid AID value %d (out of range), turn off PS\n",
2493 ifmgd
->broken_ap
= true;
2496 pos
= mgmt
->u
.assoc_resp
.variable
;
2497 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2499 if (!elems
.supp_rates
) {
2500 sdata_info(sdata
, "no SuppRates element in AssocResp\n");
2507 * Some APs are erroneously not including some information in their
2508 * (re)association response frames. Try to recover by using the data
2509 * from the beacon or probe response. This seems to afflict mobile
2510 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2511 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2513 if ((assoc_data
->wmm
&& !elems
.wmm_param
) ||
2514 (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
2515 (!elems
.ht_cap_elem
|| !elems
.ht_operation
)) ||
2516 (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
2517 (!elems
.vht_cap_elem
|| !elems
.vht_operation
))) {
2518 const struct cfg80211_bss_ies
*ies
;
2519 struct ieee802_11_elems bss_elems
;
2522 ies
= rcu_dereference(cbss
->ies
);
2524 bss_ies
= kmemdup(ies
, sizeof(*ies
) + ies
->len
,
2530 ieee802_11_parse_elems(bss_ies
->data
, bss_ies
->len
,
2532 if (assoc_data
->wmm
&&
2533 !elems
.wmm_param
&& bss_elems
.wmm_param
) {
2534 elems
.wmm_param
= bss_elems
.wmm_param
;
2536 "AP bug: WMM param missing from AssocResp\n");
2540 * Also check if we requested HT/VHT, otherwise the AP doesn't
2541 * have to include the IEs in the (re)association response.
2543 if (!elems
.ht_cap_elem
&& bss_elems
.ht_cap_elem
&&
2544 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)) {
2545 elems
.ht_cap_elem
= bss_elems
.ht_cap_elem
;
2547 "AP bug: HT capability missing from AssocResp\n");
2549 if (!elems
.ht_operation
&& bss_elems
.ht_operation
&&
2550 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)) {
2551 elems
.ht_operation
= bss_elems
.ht_operation
;
2553 "AP bug: HT operation missing from AssocResp\n");
2555 if (!elems
.vht_cap_elem
&& bss_elems
.vht_cap_elem
&&
2556 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)) {
2557 elems
.vht_cap_elem
= bss_elems
.vht_cap_elem
;
2559 "AP bug: VHT capa missing from AssocResp\n");
2561 if (!elems
.vht_operation
&& bss_elems
.vht_operation
&&
2562 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)) {
2563 elems
.vht_operation
= bss_elems
.vht_operation
;
2565 "AP bug: VHT operation missing from AssocResp\n");
2570 * We previously checked these in the beacon/probe response, so
2571 * they should be present here. This is just a safety net.
2573 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
2574 (!elems
.wmm_param
|| !elems
.ht_cap_elem
|| !elems
.ht_operation
)) {
2576 "HT AP is missing WMM params or HT capability/operation\n");
2581 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
2582 (!elems
.vht_cap_elem
|| !elems
.vht_operation
)) {
2584 "VHT AP is missing VHT capability/operation\n");
2589 mutex_lock(&sdata
->local
->sta_mtx
);
2591 * station info was already allocated and inserted before
2592 * the association and should be available to us
2594 sta
= sta_info_get(sdata
, cbss
->bssid
);
2595 if (WARN_ON(!sta
)) {
2596 mutex_unlock(&sdata
->local
->sta_mtx
);
2601 sband
= local
->hw
.wiphy
->bands
[ieee80211_get_sdata_band(sdata
)];
2603 /* Set up internal HT/VHT capabilities */
2604 if (elems
.ht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
))
2605 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata
, sband
,
2606 elems
.ht_cap_elem
, sta
);
2608 if (elems
.vht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
2609 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata
, sband
,
2610 elems
.vht_cap_elem
, sta
);
2613 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
2614 * in their association response, so ignore that data for our own
2615 * configuration. If it changed since the last beacon, we'll get the
2616 * next beacon and update then.
2620 * If an operating mode notification IE is present, override the
2621 * NSS calculation (that would be done in rate_control_rate_init())
2622 * and use the # of streams from that element.
2624 if (elems
.opmode_notif
&&
2625 !(*elems
.opmode_notif
& IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF
)) {
2628 nss
= *elems
.opmode_notif
& IEEE80211_OPMODE_NOTIF_RX_NSS_MASK
;
2629 nss
>>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT
;
2631 sta
->sta
.rx_nss
= nss
;
2634 rate_control_rate_init(sta
);
2636 if (ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
)
2637 set_sta_flag(sta
, WLAN_STA_MFP
);
2639 if (elems
.wmm_param
)
2640 set_sta_flag(sta
, WLAN_STA_WME
);
2642 err
= sta_info_move_state(sta
, IEEE80211_STA_ASSOC
);
2643 if (!err
&& !(ifmgd
->flags
& IEEE80211_STA_CONTROL_PORT
))
2644 err
= sta_info_move_state(sta
, IEEE80211_STA_AUTHORIZED
);
2647 "failed to move station %pM to desired state\n",
2649 WARN_ON(__sta_info_destroy(sta
));
2650 mutex_unlock(&sdata
->local
->sta_mtx
);
2655 mutex_unlock(&sdata
->local
->sta_mtx
);
2658 * Always handle WMM once after association regardless
2659 * of the first value the AP uses. Setting -1 here has
2660 * that effect because the AP values is an unsigned
2663 ifmgd
->wmm_last_param_set
= -1;
2665 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) && elems
.wmm_param
)
2666 ieee80211_sta_wmm_params(local
, sdata
, elems
.wmm_param
,
2667 elems
.wmm_param_len
);
2669 ieee80211_set_wmm_default(sdata
, false);
2670 changed
|= BSS_CHANGED_QOS
;
2672 /* set AID and assoc capability,
2673 * ieee80211_set_associated() will tell the driver */
2674 bss_conf
->aid
= aid
;
2675 bss_conf
->assoc_capability
= capab_info
;
2676 ieee80211_set_associated(sdata
, cbss
, changed
);
2679 * If we're using 4-addr mode, let the AP know that we're
2680 * doing so, so that it can create the STA VLAN on its side
2682 if (ifmgd
->use_4addr
)
2683 ieee80211_send_4addr_nullfunc(local
, sdata
);
2686 * Start timer to probe the connection to the AP now.
2687 * Also start the timer that will detect beacon loss.
2689 ieee80211_sta_rx_notify(sdata
, (struct ieee80211_hdr
*)mgmt
);
2690 ieee80211_sta_reset_beacon_monitor(sdata
);
2698 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data
*sdata
,
2699 struct ieee80211_mgmt
*mgmt
,
2702 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2703 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
2704 u16 capab_info
, status_code
, aid
;
2705 struct ieee802_11_elems elems
;
2708 struct cfg80211_bss
*bss
;
2710 sdata_assert_lock(sdata
);
2714 if (!ether_addr_equal(assoc_data
->bss
->bssid
, mgmt
->bssid
))
2718 * AssocResp and ReassocResp have identical structure, so process both
2719 * of them in this function.
2725 reassoc
= ieee80211_is_reassoc_req(mgmt
->frame_control
);
2726 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
2727 status_code
= le16_to_cpu(mgmt
->u
.assoc_resp
.status_code
);
2728 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
2731 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
2732 reassoc
? "Rea" : "A", mgmt
->sa
,
2733 capab_info
, status_code
, (u16
)(aid
& ~(BIT(15) | BIT(14))));
2735 pos
= mgmt
->u
.assoc_resp
.variable
;
2736 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2738 if (status_code
== WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY
&&
2739 elems
.timeout_int
&&
2740 elems
.timeout_int
->type
== WLAN_TIMEOUT_ASSOC_COMEBACK
) {
2742 tu
= le32_to_cpu(elems
.timeout_int
->value
);
2743 ms
= tu
* 1024 / 1000;
2745 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
2747 assoc_data
->timeout
= jiffies
+ msecs_to_jiffies(ms
);
2748 assoc_data
->timeout_started
= true;
2749 if (ms
> IEEE80211_ASSOC_TIMEOUT
)
2750 run_again(sdata
, assoc_data
->timeout
);
2754 bss
= assoc_data
->bss
;
2756 if (status_code
!= WLAN_STATUS_SUCCESS
) {
2757 sdata_info(sdata
, "%pM denied association (code=%d)\n",
2758 mgmt
->sa
, status_code
);
2759 ieee80211_destroy_assoc_data(sdata
, false);
2761 if (!ieee80211_assoc_success(sdata
, bss
, mgmt
, len
)) {
2762 /* oops -- internal error -- send timeout for now */
2763 ieee80211_destroy_assoc_data(sdata
, false);
2764 cfg80211_assoc_timeout(sdata
->dev
, bss
);
2767 sdata_info(sdata
, "associated\n");
2770 * destroy assoc_data afterwards, as otherwise an idle
2771 * recalc after assoc_data is NULL but before associated
2772 * is set can cause the interface to go idle
2774 ieee80211_destroy_assoc_data(sdata
, true);
2777 cfg80211_rx_assoc_resp(sdata
->dev
, bss
, (u8
*)mgmt
, len
);
2780 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data
*sdata
,
2781 struct ieee80211_mgmt
*mgmt
, size_t len
,
2782 struct ieee80211_rx_status
*rx_status
,
2783 struct ieee802_11_elems
*elems
)
2785 struct ieee80211_local
*local
= sdata
->local
;
2786 struct ieee80211_bss
*bss
;
2787 struct ieee80211_channel
*channel
;
2789 sdata_assert_lock(sdata
);
2791 channel
= ieee80211_get_channel(local
->hw
.wiphy
, rx_status
->freq
);
2795 bss
= ieee80211_bss_info_update(local
, rx_status
, mgmt
, len
, elems
,
2798 sdata
->vif
.bss_conf
.beacon_rate
= bss
->beacon_rate
;
2799 ieee80211_rx_bss_put(local
, bss
);
2804 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data
*sdata
,
2805 struct sk_buff
*skb
)
2807 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
2808 struct ieee80211_if_managed
*ifmgd
;
2809 struct ieee80211_rx_status
*rx_status
= (void *) skb
->cb
;
2810 size_t baselen
, len
= skb
->len
;
2811 struct ieee802_11_elems elems
;
2813 ifmgd
= &sdata
->u
.mgd
;
2815 sdata_assert_lock(sdata
);
2817 if (!ether_addr_equal(mgmt
->da
, sdata
->vif
.addr
))
2818 return; /* ignore ProbeResp to foreign address */
2820 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
2824 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
2827 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
2829 if (ifmgd
->associated
&&
2830 ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2831 ieee80211_reset_ap_probe(sdata
);
2833 if (ifmgd
->auth_data
&& !ifmgd
->auth_data
->bss
->proberesp_ies
&&
2834 ether_addr_equal(mgmt
->bssid
, ifmgd
->auth_data
->bss
->bssid
)) {
2835 /* got probe response, continue with auth */
2836 sdata_info(sdata
, "direct probe responded\n");
2837 ifmgd
->auth_data
->tries
= 0;
2838 ifmgd
->auth_data
->timeout
= jiffies
;
2839 ifmgd
->auth_data
->timeout_started
= true;
2840 run_again(sdata
, ifmgd
->auth_data
->timeout
);
2845 * This is the canonical list of information elements we care about,
2846 * the filter code also gives us all changes to the Microsoft OUI
2847 * (00:50:F2) vendor IE which is used for WMM which we need to track.
2849 * We implement beacon filtering in software since that means we can
2850 * avoid processing the frame here and in cfg80211, and userspace
2851 * will not be able to tell whether the hardware supports it or not.
2853 * XXX: This list needs to be dynamic -- userspace needs to be able to
2854 * add items it requires. It also needs to be able to tell us to
2855 * look out for other vendor IEs.
2857 static const u64 care_about_ies
=
2858 (1ULL << WLAN_EID_COUNTRY
) |
2859 (1ULL << WLAN_EID_ERP_INFO
) |
2860 (1ULL << WLAN_EID_CHANNEL_SWITCH
) |
2861 (1ULL << WLAN_EID_PWR_CONSTRAINT
) |
2862 (1ULL << WLAN_EID_HT_CAPABILITY
) |
2863 (1ULL << WLAN_EID_HT_OPERATION
);
2865 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data
*sdata
,
2866 struct ieee80211_mgmt
*mgmt
, size_t len
,
2867 struct ieee80211_rx_status
*rx_status
)
2869 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2870 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
2872 struct ieee802_11_elems elems
;
2873 struct ieee80211_local
*local
= sdata
->local
;
2874 struct ieee80211_chanctx_conf
*chanctx_conf
;
2875 struct ieee80211_channel
*chan
;
2876 struct sta_info
*sta
;
2882 u8 deauth_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
2884 sdata_assert_lock(sdata
);
2886 /* Process beacon from the current BSS */
2887 baselen
= (u8
*) mgmt
->u
.beacon
.variable
- (u8
*) mgmt
;
2892 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2893 if (!chanctx_conf
) {
2898 if (rx_status
->freq
!= chanctx_conf
->def
.chan
->center_freq
) {
2902 chan
= chanctx_conf
->def
.chan
;
2905 if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->need_beacon
&&
2906 ether_addr_equal(mgmt
->bssid
, ifmgd
->assoc_data
->bss
->bssid
)) {
2907 ieee802_11_parse_elems(mgmt
->u
.beacon
.variable
,
2908 len
- baselen
, false, &elems
);
2910 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
2911 if (elems
.tim
&& !elems
.parse_error
) {
2912 const struct ieee80211_tim_ie
*tim_ie
= elems
.tim
;
2913 ifmgd
->dtim_period
= tim_ie
->dtim_period
;
2915 ifmgd
->have_beacon
= true;
2916 ifmgd
->assoc_data
->need_beacon
= false;
2917 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
2918 sdata
->vif
.bss_conf
.sync_tsf
=
2919 le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
2920 sdata
->vif
.bss_conf
.sync_device_ts
=
2921 rx_status
->device_timestamp
;
2923 sdata
->vif
.bss_conf
.sync_dtim_count
=
2924 elems
.tim
->dtim_count
;
2926 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
2928 /* continue assoc process */
2929 ifmgd
->assoc_data
->timeout
= jiffies
;
2930 ifmgd
->assoc_data
->timeout_started
= true;
2931 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
2935 if (!ifmgd
->associated
||
2936 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2938 bssid
= ifmgd
->associated
->bssid
;
2940 /* Track average RSSI from the Beacon frames of the current AP */
2941 ifmgd
->last_beacon_signal
= rx_status
->signal
;
2942 if (ifmgd
->flags
& IEEE80211_STA_RESET_SIGNAL_AVE
) {
2943 ifmgd
->flags
&= ~IEEE80211_STA_RESET_SIGNAL_AVE
;
2944 ifmgd
->ave_beacon_signal
= rx_status
->signal
* 16;
2945 ifmgd
->last_cqm_event_signal
= 0;
2946 ifmgd
->count_beacon_signal
= 1;
2947 ifmgd
->last_ave_beacon_signal
= 0;
2949 ifmgd
->ave_beacon_signal
=
2950 (IEEE80211_SIGNAL_AVE_WEIGHT
* rx_status
->signal
* 16 +
2951 (16 - IEEE80211_SIGNAL_AVE_WEIGHT
) *
2952 ifmgd
->ave_beacon_signal
) / 16;
2953 ifmgd
->count_beacon_signal
++;
2956 if (ifmgd
->rssi_min_thold
!= ifmgd
->rssi_max_thold
&&
2957 ifmgd
->count_beacon_signal
>= IEEE80211_SIGNAL_AVE_MIN_COUNT
) {
2958 int sig
= ifmgd
->ave_beacon_signal
;
2959 int last_sig
= ifmgd
->last_ave_beacon_signal
;
2962 * if signal crosses either of the boundaries, invoke callback
2963 * with appropriate parameters
2965 if (sig
> ifmgd
->rssi_max_thold
&&
2966 (last_sig
<= ifmgd
->rssi_min_thold
|| last_sig
== 0)) {
2967 ifmgd
->last_ave_beacon_signal
= sig
;
2968 drv_rssi_callback(local
, sdata
, RSSI_EVENT_HIGH
);
2969 } else if (sig
< ifmgd
->rssi_min_thold
&&
2970 (last_sig
>= ifmgd
->rssi_max_thold
||
2972 ifmgd
->last_ave_beacon_signal
= sig
;
2973 drv_rssi_callback(local
, sdata
, RSSI_EVENT_LOW
);
2977 if (bss_conf
->cqm_rssi_thold
&&
2978 ifmgd
->count_beacon_signal
>= IEEE80211_SIGNAL_AVE_MIN_COUNT
&&
2979 !(sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_CQM_RSSI
)) {
2980 int sig
= ifmgd
->ave_beacon_signal
/ 16;
2981 int last_event
= ifmgd
->last_cqm_event_signal
;
2982 int thold
= bss_conf
->cqm_rssi_thold
;
2983 int hyst
= bss_conf
->cqm_rssi_hyst
;
2985 (last_event
== 0 || sig
< last_event
- hyst
)) {
2986 ifmgd
->last_cqm_event_signal
= sig
;
2987 ieee80211_cqm_rssi_notify(
2989 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW
,
2991 } else if (sig
> thold
&&
2992 (last_event
== 0 || sig
> last_event
+ hyst
)) {
2993 ifmgd
->last_cqm_event_signal
= sig
;
2994 ieee80211_cqm_rssi_notify(
2996 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH
,
3001 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
) {
3002 mlme_dbg_ratelimited(sdata
,
3003 "cancelling AP probe due to a received beacon\n");
3004 ieee80211_reset_ap_probe(sdata
);
3008 * Push the beacon loss detection into the future since
3009 * we are processing a beacon from the AP just now.
3011 ieee80211_sta_reset_beacon_monitor(sdata
);
3013 ncrc
= crc32_be(0, (void *)&mgmt
->u
.beacon
.beacon_int
, 4);
3014 ncrc
= ieee802_11_parse_elems_crc(mgmt
->u
.beacon
.variable
,
3015 len
- baselen
, false, &elems
,
3016 care_about_ies
, ncrc
);
3018 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) {
3019 bool directed_tim
= ieee80211_check_tim(elems
.tim
,
3023 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
3024 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
3025 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
3026 ieee80211_hw_config(local
,
3027 IEEE80211_CONF_CHANGE_PS
);
3029 ieee80211_send_nullfunc(local
, sdata
, 0);
3030 } else if (!local
->pspolling
&& sdata
->u
.mgd
.powersave
) {
3031 local
->pspolling
= true;
3034 * Here is assumed that the driver will be
3035 * able to send ps-poll frame and receive a
3036 * response even though power save mode is
3037 * enabled, but some drivers might require
3038 * to disable power save here. This needs
3039 * to be investigated.
3041 ieee80211_send_pspoll(local
, sdata
);
3046 if (sdata
->vif
.p2p
) {
3047 struct ieee80211_p2p_noa_attr noa
= {};
3050 ret
= cfg80211_get_p2p_attr(mgmt
->u
.beacon
.variable
,
3052 IEEE80211_P2P_ATTR_ABSENCE_NOTICE
,
3053 (u8
*) &noa
, sizeof(noa
));
3055 if (sdata
->u
.mgd
.p2p_noa_index
!= noa
.index
) {
3056 /* valid noa_attr and index changed */
3057 sdata
->u
.mgd
.p2p_noa_index
= noa
.index
;
3058 memcpy(&bss_conf
->p2p_noa_attr
, &noa
, sizeof(noa
));
3059 changed
|= BSS_CHANGED_P2P_PS
;
3061 * make sure we update all information, the CRC
3062 * mechanism doesn't look at P2P attributes.
3064 ifmgd
->beacon_crc_valid
= false;
3066 } else if (sdata
->u
.mgd
.p2p_noa_index
!= -1) {
3067 /* noa_attr not found and we had valid noa_attr before */
3068 sdata
->u
.mgd
.p2p_noa_index
= -1;
3069 memset(&bss_conf
->p2p_noa_attr
, 0, sizeof(bss_conf
->p2p_noa_attr
));
3070 changed
|= BSS_CHANGED_P2P_PS
;
3071 ifmgd
->beacon_crc_valid
= false;
3075 if (ncrc
== ifmgd
->beacon_crc
&& ifmgd
->beacon_crc_valid
)
3077 ifmgd
->beacon_crc
= ncrc
;
3078 ifmgd
->beacon_crc_valid
= true;
3080 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
3082 ieee80211_sta_process_chanswitch(sdata
, rx_status
->mactime
,
3085 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) &&
3086 ieee80211_sta_wmm_params(local
, sdata
, elems
.wmm_param
,
3087 elems
.wmm_param_len
))
3088 changed
|= BSS_CHANGED_QOS
;
3091 * If we haven't had a beacon before, tell the driver about the
3092 * DTIM period (and beacon timing if desired) now.
3094 if (!ifmgd
->have_beacon
) {
3095 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3097 bss_conf
->dtim_period
= elems
.tim
->dtim_period
?: 1;
3099 bss_conf
->dtim_period
= 1;
3101 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
3102 sdata
->vif
.bss_conf
.sync_tsf
=
3103 le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
3104 sdata
->vif
.bss_conf
.sync_device_ts
=
3105 rx_status
->device_timestamp
;
3107 sdata
->vif
.bss_conf
.sync_dtim_count
=
3108 elems
.tim
->dtim_count
;
3110 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3113 changed
|= BSS_CHANGED_BEACON_INFO
;
3114 ifmgd
->have_beacon
= true;
3116 mutex_lock(&local
->iflist_mtx
);
3117 ieee80211_recalc_ps(local
, -1);
3118 mutex_unlock(&local
->iflist_mtx
);
3120 ieee80211_recalc_ps_vif(sdata
);
3123 if (elems
.erp_info
) {
3125 erp_value
= elems
.erp_info
[0];
3129 changed
|= ieee80211_handle_bss_capability(sdata
,
3130 le16_to_cpu(mgmt
->u
.beacon
.capab_info
),
3131 erp_valid
, erp_value
);
3133 mutex_lock(&local
->sta_mtx
);
3134 sta
= sta_info_get(sdata
, bssid
);
3136 if (ieee80211_config_bw(sdata
, sta
, elems
.ht_operation
,
3137 elems
.vht_operation
, bssid
, &changed
)) {
3138 mutex_unlock(&local
->sta_mtx
);
3139 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
3140 WLAN_REASON_DEAUTH_LEAVING
,
3142 cfg80211_tx_mlme_mgmt(sdata
->dev
, deauth_buf
,
3143 sizeof(deauth_buf
));
3147 if (sta
&& elems
.opmode_notif
)
3148 ieee80211_vht_handle_opmode(sdata
, sta
, *elems
.opmode_notif
,
3149 rx_status
->band
, true);
3150 mutex_unlock(&local
->sta_mtx
);
3152 if (elems
.country_elem
&& elems
.pwr_constr_elem
&&
3153 mgmt
->u
.probe_resp
.capab_info
&
3154 cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT
))
3155 changed
|= ieee80211_handle_pwr_constr(sdata
, chan
,
3157 elems
.country_elem_len
,
3158 elems
.pwr_constr_elem
);
3160 ieee80211_bss_info_change_notify(sdata
, changed
);
3163 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
3164 struct sk_buff
*skb
)
3166 struct ieee80211_rx_status
*rx_status
;
3167 struct ieee80211_mgmt
*mgmt
;
3169 struct ieee802_11_elems elems
;
3172 rx_status
= (struct ieee80211_rx_status
*) skb
->cb
;
3173 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
3174 fc
= le16_to_cpu(mgmt
->frame_control
);
3178 switch (fc
& IEEE80211_FCTL_STYPE
) {
3179 case IEEE80211_STYPE_BEACON
:
3180 ieee80211_rx_mgmt_beacon(sdata
, mgmt
, skb
->len
, rx_status
);
3182 case IEEE80211_STYPE_PROBE_RESP
:
3183 ieee80211_rx_mgmt_probe_resp(sdata
, skb
);
3185 case IEEE80211_STYPE_AUTH
:
3186 ieee80211_rx_mgmt_auth(sdata
, mgmt
, skb
->len
);
3188 case IEEE80211_STYPE_DEAUTH
:
3189 ieee80211_rx_mgmt_deauth(sdata
, mgmt
, skb
->len
);
3191 case IEEE80211_STYPE_DISASSOC
:
3192 ieee80211_rx_mgmt_disassoc(sdata
, mgmt
, skb
->len
);
3194 case IEEE80211_STYPE_ASSOC_RESP
:
3195 case IEEE80211_STYPE_REASSOC_RESP
:
3196 ieee80211_rx_mgmt_assoc_resp(sdata
, mgmt
, skb
->len
);
3198 case IEEE80211_STYPE_ACTION
:
3199 if (mgmt
->u
.action
.category
== WLAN_CATEGORY_SPECTRUM_MGMT
) {
3200 ies_len
= skb
->len
-
3201 offsetof(struct ieee80211_mgmt
,
3202 u
.action
.u
.chan_switch
.variable
);
3207 ieee802_11_parse_elems(
3208 mgmt
->u
.action
.u
.chan_switch
.variable
,
3209 ies_len
, true, &elems
);
3211 if (elems
.parse_error
)
3214 ieee80211_sta_process_chanswitch(sdata
,
3217 } else if (mgmt
->u
.action
.category
== WLAN_CATEGORY_PUBLIC
) {
3218 ies_len
= skb
->len
-
3219 offsetof(struct ieee80211_mgmt
,
3220 u
.action
.u
.ext_chan_switch
.variable
);
3225 ieee802_11_parse_elems(
3226 mgmt
->u
.action
.u
.ext_chan_switch
.variable
,
3227 ies_len
, true, &elems
);
3229 if (elems
.parse_error
)
3232 /* for the handling code pretend this was also an IE */
3233 elems
.ext_chansw_ie
=
3234 &mgmt
->u
.action
.u
.ext_chan_switch
.data
;
3236 ieee80211_sta_process_chanswitch(sdata
,
3242 sdata_unlock(sdata
);
3245 static void ieee80211_sta_timer(unsigned long data
)
3247 struct ieee80211_sub_if_data
*sdata
=
3248 (struct ieee80211_sub_if_data
*) data
;
3250 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
3253 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data
*sdata
,
3254 u8
*bssid
, u8 reason
, bool tx
)
3256 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3258 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
, reason
,
3261 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
3262 IEEE80211_DEAUTH_FRAME_LEN
);
3265 static int ieee80211_probe_auth(struct ieee80211_sub_if_data
*sdata
)
3267 struct ieee80211_local
*local
= sdata
->local
;
3268 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3269 struct ieee80211_mgd_auth_data
*auth_data
= ifmgd
->auth_data
;
3272 sdata_assert_lock(sdata
);
3274 if (WARN_ON_ONCE(!auth_data
))
3279 if (auth_data
->tries
> IEEE80211_AUTH_MAX_TRIES
) {
3280 sdata_info(sdata
, "authentication with %pM timed out\n",
3281 auth_data
->bss
->bssid
);
3284 * Most likely AP is not in the range so remove the
3285 * bss struct for that AP.
3287 cfg80211_unlink_bss(local
->hw
.wiphy
, auth_data
->bss
);
3292 drv_mgd_prepare_tx(local
, sdata
);
3294 if (auth_data
->bss
->proberesp_ies
) {
3298 sdata_info(sdata
, "send auth to %pM (try %d/%d)\n",
3299 auth_data
->bss
->bssid
, auth_data
->tries
,
3300 IEEE80211_AUTH_MAX_TRIES
);
3302 auth_data
->expected_transaction
= 2;
3304 if (auth_data
->algorithm
== WLAN_AUTH_SAE
) {
3305 trans
= auth_data
->sae_trans
;
3306 status
= auth_data
->sae_status
;
3307 auth_data
->expected_transaction
= trans
;
3310 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
3311 tx_flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
3312 IEEE80211_TX_INTFL_MLME_CONN_TX
;
3314 ieee80211_send_auth(sdata
, trans
, auth_data
->algorithm
, status
,
3315 auth_data
->data
, auth_data
->data_len
,
3316 auth_data
->bss
->bssid
,
3317 auth_data
->bss
->bssid
, NULL
, 0, 0,
3322 sdata_info(sdata
, "direct probe to %pM (try %d/%i)\n",
3323 auth_data
->bss
->bssid
, auth_data
->tries
,
3324 IEEE80211_AUTH_MAX_TRIES
);
3327 ssidie
= ieee80211_bss_get_ie(auth_data
->bss
, WLAN_EID_SSID
);
3333 * Direct probe is sent to broadcast address as some APs
3334 * will not answer to direct packet in unassociated state.
3336 ieee80211_send_probe_req(sdata
, NULL
, ssidie
+ 2, ssidie
[1],
3337 NULL
, 0, (u32
) -1, true, 0,
3338 auth_data
->bss
->channel
, false);
3342 if (tx_flags
== 0) {
3343 auth_data
->timeout
= jiffies
+ IEEE80211_AUTH_TIMEOUT
;
3344 auth_data
->timeout_started
= true;
3345 run_again(sdata
, auth_data
->timeout
);
3347 auth_data
->timeout
=
3348 round_jiffies_up(jiffies
+ IEEE80211_AUTH_TIMEOUT_LONG
);
3349 auth_data
->timeout_started
= true;
3350 run_again(sdata
, auth_data
->timeout
);
3356 static int ieee80211_do_assoc(struct ieee80211_sub_if_data
*sdata
)
3358 struct ieee80211_mgd_assoc_data
*assoc_data
= sdata
->u
.mgd
.assoc_data
;
3359 struct ieee80211_local
*local
= sdata
->local
;
3361 sdata_assert_lock(sdata
);
3363 assoc_data
->tries
++;
3364 if (assoc_data
->tries
> IEEE80211_ASSOC_MAX_TRIES
) {
3365 sdata_info(sdata
, "association with %pM timed out\n",
3366 assoc_data
->bss
->bssid
);
3369 * Most likely AP is not in the range so remove the
3370 * bss struct for that AP.
3372 cfg80211_unlink_bss(local
->hw
.wiphy
, assoc_data
->bss
);
3377 sdata_info(sdata
, "associate with %pM (try %d/%d)\n",
3378 assoc_data
->bss
->bssid
, assoc_data
->tries
,
3379 IEEE80211_ASSOC_MAX_TRIES
);
3380 ieee80211_send_assoc(sdata
);
3382 if (!(local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)) {
3383 assoc_data
->timeout
= jiffies
+ IEEE80211_ASSOC_TIMEOUT
;
3384 assoc_data
->timeout_started
= true;
3385 run_again(sdata
, assoc_data
->timeout
);
3387 assoc_data
->timeout
=
3388 round_jiffies_up(jiffies
+
3389 IEEE80211_ASSOC_TIMEOUT_LONG
);
3390 assoc_data
->timeout_started
= true;
3391 run_again(sdata
, assoc_data
->timeout
);
3397 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data
*sdata
,
3398 __le16 fc
, bool acked
)
3400 struct ieee80211_local
*local
= sdata
->local
;
3402 sdata
->u
.mgd
.status_fc
= fc
;
3403 sdata
->u
.mgd
.status_acked
= acked
;
3404 sdata
->u
.mgd
.status_received
= true;
3406 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
3409 void ieee80211_sta_work(struct ieee80211_sub_if_data
*sdata
)
3411 struct ieee80211_local
*local
= sdata
->local
;
3412 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3416 if (ifmgd
->status_received
) {
3417 __le16 fc
= ifmgd
->status_fc
;
3418 bool status_acked
= ifmgd
->status_acked
;
3420 ifmgd
->status_received
= false;
3421 if (ifmgd
->auth_data
&&
3422 (ieee80211_is_probe_req(fc
) || ieee80211_is_auth(fc
))) {
3424 ifmgd
->auth_data
->timeout
=
3425 jiffies
+ IEEE80211_AUTH_TIMEOUT_SHORT
;
3426 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3428 ifmgd
->auth_data
->timeout
= jiffies
- 1;
3430 ifmgd
->auth_data
->timeout_started
= true;
3431 } else if (ifmgd
->assoc_data
&&
3432 (ieee80211_is_assoc_req(fc
) ||
3433 ieee80211_is_reassoc_req(fc
))) {
3435 ifmgd
->assoc_data
->timeout
=
3436 jiffies
+ IEEE80211_ASSOC_TIMEOUT_SHORT
;
3437 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3439 ifmgd
->assoc_data
->timeout
= jiffies
- 1;
3441 ifmgd
->assoc_data
->timeout_started
= true;
3445 if (ifmgd
->auth_data
&& ifmgd
->auth_data
->timeout_started
&&
3446 time_after(jiffies
, ifmgd
->auth_data
->timeout
)) {
3447 if (ifmgd
->auth_data
->done
) {
3449 * ok ... we waited for assoc but userspace didn't,
3450 * so let's just kill the auth data
3452 ieee80211_destroy_auth_data(sdata
, false);
3453 } else if (ieee80211_probe_auth(sdata
)) {
3456 memcpy(bssid
, ifmgd
->auth_data
->bss
->bssid
, ETH_ALEN
);
3458 ieee80211_destroy_auth_data(sdata
, false);
3460 cfg80211_auth_timeout(sdata
->dev
, bssid
);
3462 } else if (ifmgd
->auth_data
&& ifmgd
->auth_data
->timeout_started
)
3463 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3465 if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->timeout_started
&&
3466 time_after(jiffies
, ifmgd
->assoc_data
->timeout
)) {
3467 if ((ifmgd
->assoc_data
->need_beacon
&& !ifmgd
->have_beacon
) ||
3468 ieee80211_do_assoc(sdata
)) {
3469 struct cfg80211_bss
*bss
= ifmgd
->assoc_data
->bss
;
3471 ieee80211_destroy_assoc_data(sdata
, false);
3472 cfg80211_assoc_timeout(sdata
->dev
, bss
);
3474 } else if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->timeout_started
)
3475 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3477 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
&&
3478 ifmgd
->associated
) {
3482 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
3484 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
3485 max_tries
= max_nullfunc_tries
;
3487 max_tries
= max_probe_tries
;
3489 /* ACK received for nullfunc probing frame */
3490 if (!ifmgd
->probe_send_count
)
3491 ieee80211_reset_ap_probe(sdata
);
3492 else if (ifmgd
->nullfunc_failed
) {
3493 if (ifmgd
->probe_send_count
< max_tries
) {
3495 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3496 bssid
, ifmgd
->probe_send_count
,
3498 ieee80211_mgd_probe_ap_send(sdata
);
3501 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3503 ieee80211_sta_connection_lost(sdata
, bssid
,
3504 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
3507 } else if (time_is_after_jiffies(ifmgd
->probe_timeout
))
3508 run_again(sdata
, ifmgd
->probe_timeout
);
3509 else if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) {
3511 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3512 bssid
, probe_wait_ms
);
3513 ieee80211_sta_connection_lost(sdata
, bssid
,
3514 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
, false);
3515 } else if (ifmgd
->probe_send_count
< max_tries
) {
3517 "No probe response from AP %pM after %dms, try %d/%i\n",
3518 bssid
, probe_wait_ms
,
3519 ifmgd
->probe_send_count
, max_tries
);
3520 ieee80211_mgd_probe_ap_send(sdata
);
3523 * We actually lost the connection ... or did we?
3526 wiphy_debug(local
->hw
.wiphy
,
3527 "%s: No probe response from AP %pM"
3528 " after %dms, disconnecting.\n",
3530 bssid
, probe_wait_ms
);
3532 ieee80211_sta_connection_lost(sdata
, bssid
,
3533 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
, false);
3537 sdata_unlock(sdata
);
3540 static void ieee80211_sta_bcn_mon_timer(unsigned long data
)
3542 struct ieee80211_sub_if_data
*sdata
=
3543 (struct ieee80211_sub_if_data
*) data
;
3544 struct ieee80211_local
*local
= sdata
->local
;
3546 if (local
->quiescing
)
3549 sdata
->u
.mgd
.connection_loss
= false;
3550 ieee80211_queue_work(&sdata
->local
->hw
,
3551 &sdata
->u
.mgd
.beacon_connection_loss_work
);
3554 static void ieee80211_sta_conn_mon_timer(unsigned long data
)
3556 struct ieee80211_sub_if_data
*sdata
=
3557 (struct ieee80211_sub_if_data
*) data
;
3558 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3559 struct ieee80211_local
*local
= sdata
->local
;
3561 if (local
->quiescing
)
3564 ieee80211_queue_work(&local
->hw
, &ifmgd
->monitor_work
);
3567 static void ieee80211_sta_monitor_work(struct work_struct
*work
)
3569 struct ieee80211_sub_if_data
*sdata
=
3570 container_of(work
, struct ieee80211_sub_if_data
,
3571 u
.mgd
.monitor_work
);
3573 ieee80211_mgd_probe_ap(sdata
, false);
3576 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data
*sdata
)
3580 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
3581 __ieee80211_stop_poll(sdata
);
3583 /* let's probe the connection once */
3584 flags
= sdata
->local
->hw
.flags
;
3585 if (!(flags
& IEEE80211_HW_CONNECTION_MONITOR
))
3586 ieee80211_queue_work(&sdata
->local
->hw
,
3587 &sdata
->u
.mgd
.monitor_work
);
3588 /* and do all the other regular work too */
3589 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
3594 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data
*sdata
)
3596 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3597 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3601 if (ifmgd
->auth_data
) {
3603 * If we are trying to authenticate while suspending, cfg80211
3604 * won't know and won't actually abort those attempts, thus we
3605 * need to do that ourselves.
3607 ieee80211_send_deauth_disassoc(sdata
,
3608 ifmgd
->auth_data
->bss
->bssid
,
3609 IEEE80211_STYPE_DEAUTH
,
3610 WLAN_REASON_DEAUTH_LEAVING
,
3612 ieee80211_destroy_auth_data(sdata
, false);
3613 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
3614 IEEE80211_DEAUTH_FRAME_LEN
);
3617 sdata_unlock(sdata
);
3620 void ieee80211_sta_restart(struct ieee80211_sub_if_data
*sdata
)
3622 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3625 if (!ifmgd
->associated
) {
3626 sdata_unlock(sdata
);
3630 if (sdata
->flags
& IEEE80211_SDATA_DISCONNECT_RESUME
) {
3631 sdata
->flags
&= ~IEEE80211_SDATA_DISCONNECT_RESUME
;
3632 mlme_dbg(sdata
, "driver requested disconnect after resume\n");
3633 ieee80211_sta_connection_lost(sdata
,
3634 ifmgd
->associated
->bssid
,
3635 WLAN_REASON_UNSPECIFIED
,
3637 sdata_unlock(sdata
);
3640 sdata_unlock(sdata
);
3644 /* interface setup */
3645 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data
*sdata
)
3647 struct ieee80211_if_managed
*ifmgd
;
3649 ifmgd
= &sdata
->u
.mgd
;
3650 INIT_WORK(&ifmgd
->monitor_work
, ieee80211_sta_monitor_work
);
3651 INIT_WORK(&ifmgd
->chswitch_work
, ieee80211_chswitch_work
);
3652 INIT_WORK(&ifmgd
->beacon_connection_loss_work
,
3653 ieee80211_beacon_connection_loss_work
);
3654 INIT_WORK(&ifmgd
->csa_connection_drop_work
,
3655 ieee80211_csa_connection_drop_work
);
3656 INIT_WORK(&ifmgd
->request_smps_work
, ieee80211_request_smps_mgd_work
);
3657 setup_timer(&ifmgd
->timer
, ieee80211_sta_timer
,
3658 (unsigned long) sdata
);
3659 setup_timer(&ifmgd
->bcn_mon_timer
, ieee80211_sta_bcn_mon_timer
,
3660 (unsigned long) sdata
);
3661 setup_timer(&ifmgd
->conn_mon_timer
, ieee80211_sta_conn_mon_timer
,
3662 (unsigned long) sdata
);
3663 setup_timer(&ifmgd
->chswitch_timer
, ieee80211_chswitch_timer
,
3664 (unsigned long) sdata
);
3667 ifmgd
->powersave
= sdata
->wdev
.ps
;
3668 ifmgd
->uapsd_queues
= sdata
->local
->hw
.uapsd_queues
;
3669 ifmgd
->uapsd_max_sp_len
= sdata
->local
->hw
.uapsd_max_sp_len
;
3670 ifmgd
->p2p_noa_index
= -1;
3672 if (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
)
3673 ifmgd
->req_smps
= IEEE80211_SMPS_AUTOMATIC
;
3675 ifmgd
->req_smps
= IEEE80211_SMPS_OFF
;
3678 /* scan finished notification */
3679 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local
*local
)
3681 struct ieee80211_sub_if_data
*sdata
;
3683 /* Restart STA timers */
3685 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
3686 if (ieee80211_sdata_running(sdata
))
3687 ieee80211_restart_sta_timer(sdata
);
3692 int ieee80211_max_network_latency(struct notifier_block
*nb
,
3693 unsigned long data
, void *dummy
)
3695 s32 latency_usec
= (s32
) data
;
3696 struct ieee80211_local
*local
=
3697 container_of(nb
, struct ieee80211_local
,
3698 network_latency_notifier
);
3700 mutex_lock(&local
->iflist_mtx
);
3701 ieee80211_recalc_ps(local
, latency_usec
);
3702 mutex_unlock(&local
->iflist_mtx
);
3707 static u8
ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data
*sdata
,
3708 struct cfg80211_bss
*cbss
)
3710 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3711 const u8
*ht_cap_ie
, *vht_cap_ie
;
3712 const struct ieee80211_ht_cap
*ht_cap
;
3713 const struct ieee80211_vht_cap
*vht_cap
;
3716 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)
3719 ht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_CAPABILITY
);
3720 if (ht_cap_ie
&& ht_cap_ie
[1] >= sizeof(*ht_cap
)) {
3721 ht_cap
= (void *)(ht_cap_ie
+ 2);
3722 chains
= ieee80211_mcs_to_chains(&ht_cap
->mcs
);
3724 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
3725 * "Tx Unequal Modulation Supported" fields.
3729 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)
3732 vht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_VHT_CAPABILITY
);
3733 if (vht_cap_ie
&& vht_cap_ie
[1] >= sizeof(*vht_cap
)) {
3737 vht_cap
= (void *)(vht_cap_ie
+ 2);
3738 tx_mcs_map
= le16_to_cpu(vht_cap
->supp_mcs
.tx_mcs_map
);
3739 for (nss
= 8; nss
> 0; nss
--) {
3740 if (((tx_mcs_map
>> (2 * (nss
- 1))) & 3) !=
3741 IEEE80211_VHT_MCS_NOT_SUPPORTED
)
3744 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
3745 chains
= max(chains
, nss
);
3751 static int ieee80211_prep_channel(struct ieee80211_sub_if_data
*sdata
,
3752 struct cfg80211_bss
*cbss
)
3754 struct ieee80211_local
*local
= sdata
->local
;
3755 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3756 const struct ieee80211_ht_operation
*ht_oper
= NULL
;
3757 const struct ieee80211_vht_operation
*vht_oper
= NULL
;
3758 struct ieee80211_supported_band
*sband
;
3759 struct cfg80211_chan_def chandef
;
3762 sband
= local
->hw
.wiphy
->bands
[cbss
->channel
->band
];
3764 ifmgd
->flags
&= ~(IEEE80211_STA_DISABLE_40MHZ
|
3765 IEEE80211_STA_DISABLE_80P80MHZ
|
3766 IEEE80211_STA_DISABLE_160MHZ
);
3770 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
3771 sband
->ht_cap
.ht_supported
) {
3772 const u8
*ht_oper_ie
, *ht_cap
;
3774 ht_oper_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_OPERATION
);
3775 if (ht_oper_ie
&& ht_oper_ie
[1] >= sizeof(*ht_oper
))
3776 ht_oper
= (void *)(ht_oper_ie
+ 2);
3778 ht_cap
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_CAPABILITY
);
3779 if (!ht_cap
|| ht_cap
[1] < sizeof(struct ieee80211_ht_cap
)) {
3780 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
3785 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
3786 sband
->vht_cap
.vht_supported
) {
3787 const u8
*vht_oper_ie
, *vht_cap
;
3789 vht_oper_ie
= ieee80211_bss_get_ie(cbss
,
3790 WLAN_EID_VHT_OPERATION
);
3791 if (vht_oper_ie
&& vht_oper_ie
[1] >= sizeof(*vht_oper
))
3792 vht_oper
= (void *)(vht_oper_ie
+ 2);
3793 if (vht_oper
&& !ht_oper
) {
3796 "AP advertised VHT without HT, disabling both\n");
3797 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
3798 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
3801 vht_cap
= ieee80211_bss_get_ie(cbss
, WLAN_EID_VHT_CAPABILITY
);
3802 if (!vht_cap
|| vht_cap
[1] < sizeof(struct ieee80211_vht_cap
)) {
3803 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
3808 ifmgd
->flags
|= ieee80211_determine_chantype(sdata
, sband
,
3813 sdata
->needed_rx_chains
= min(ieee80211_ht_vht_rx_chains(sdata
, cbss
),
3818 /* will change later if needed */
3819 sdata
->smps_mode
= IEEE80211_SMPS_OFF
;
3821 mutex_lock(&local
->mtx
);
3823 * If this fails (possibly due to channel context sharing
3824 * on incompatible channels, e.g. 80+80 and 160 sharing the
3825 * same control channel) try to use a smaller bandwidth.
3827 ret
= ieee80211_vif_use_channel(sdata
, &chandef
,
3828 IEEE80211_CHANCTX_SHARED
);
3830 /* don't downgrade for 5 and 10 MHz channels, though. */
3831 if (chandef
.width
== NL80211_CHAN_WIDTH_5
||
3832 chandef
.width
== NL80211_CHAN_WIDTH_10
)
3835 while (ret
&& chandef
.width
!= NL80211_CHAN_WIDTH_20_NOHT
) {
3836 ifmgd
->flags
|= ieee80211_chandef_downgrade(&chandef
);
3837 ret
= ieee80211_vif_use_channel(sdata
, &chandef
,
3838 IEEE80211_CHANCTX_SHARED
);
3841 mutex_unlock(&local
->mtx
);
3845 static int ieee80211_prep_connection(struct ieee80211_sub_if_data
*sdata
,
3846 struct cfg80211_bss
*cbss
, bool assoc
)
3848 struct ieee80211_local
*local
= sdata
->local
;
3849 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3850 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
3851 struct sta_info
*new_sta
= NULL
;
3852 bool have_sta
= false;
3855 if (WARN_ON(!ifmgd
->auth_data
&& !ifmgd
->assoc_data
))
3860 have_sta
= sta_info_get(sdata
, cbss
->bssid
);
3865 new_sta
= sta_info_alloc(sdata
, cbss
->bssid
, GFP_KERNEL
);
3870 u32 rates
= 0, basic_rates
= 0;
3871 bool have_higher_than_11mbit
;
3872 int min_rate
= INT_MAX
, min_rate_index
= -1;
3873 struct ieee80211_chanctx_conf
*chanctx_conf
;
3874 struct ieee80211_supported_band
*sband
;
3875 const struct cfg80211_bss_ies
*ies
;
3879 sband
= local
->hw
.wiphy
->bands
[cbss
->channel
->band
];
3881 err
= ieee80211_prep_channel(sdata
, cbss
);
3883 sta_info_free(local
, new_sta
);
3886 shift
= ieee80211_vif_get_shift(&sdata
->vif
);
3889 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3890 if (WARN_ON(!chanctx_conf
)) {
3892 sta_info_free(local
, new_sta
);
3895 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
3898 ieee80211_get_rates(sband
, bss
->supp_rates
,
3899 bss
->supp_rates_len
,
3900 &rates
, &basic_rates
,
3901 &have_higher_than_11mbit
,
3902 &min_rate
, &min_rate_index
,
3906 * This used to be a workaround for basic rates missing
3907 * in the association response frame. Now that we no
3908 * longer use the basic rates from there, it probably
3909 * doesn't happen any more, but keep the workaround so
3910 * in case some *other* APs are buggy in different ways
3911 * we can connect -- with a warning.
3913 if (!basic_rates
&& min_rate_index
>= 0) {
3915 "No basic rates, using min rate instead\n");
3916 basic_rates
= BIT(min_rate_index
);
3919 new_sta
->sta
.supp_rates
[cbss
->channel
->band
] = rates
;
3920 sdata
->vif
.bss_conf
.basic_rates
= basic_rates
;
3922 /* cf. IEEE 802.11 9.2.12 */
3923 if (cbss
->channel
->band
== IEEE80211_BAND_2GHZ
&&
3924 have_higher_than_11mbit
)
3925 sdata
->flags
|= IEEE80211_SDATA_OPERATING_GMODE
;
3927 sdata
->flags
&= ~IEEE80211_SDATA_OPERATING_GMODE
;
3929 memcpy(ifmgd
->bssid
, cbss
->bssid
, ETH_ALEN
);
3931 /* set timing information */
3932 sdata
->vif
.bss_conf
.beacon_int
= cbss
->beacon_interval
;
3934 ies
= rcu_dereference(cbss
->beacon_ies
);
3938 sdata
->vif
.bss_conf
.sync_tsf
= ies
->tsf
;
3939 sdata
->vif
.bss_conf
.sync_device_ts
=
3940 bss
->device_ts_beacon
;
3941 tim_ie
= cfg80211_find_ie(WLAN_EID_TIM
,
3942 ies
->data
, ies
->len
);
3943 if (tim_ie
&& tim_ie
[1] >= 2)
3944 sdata
->vif
.bss_conf
.sync_dtim_count
= tim_ie
[2];
3946 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3947 } else if (!(local
->hw
.flags
&
3948 IEEE80211_HW_TIMING_BEACON_ONLY
)) {
3949 ies
= rcu_dereference(cbss
->proberesp_ies
);
3950 /* must be non-NULL since beacon IEs were NULL */
3951 sdata
->vif
.bss_conf
.sync_tsf
= ies
->tsf
;
3952 sdata
->vif
.bss_conf
.sync_device_ts
=
3953 bss
->device_ts_presp
;
3954 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3956 sdata
->vif
.bss_conf
.sync_tsf
= 0;
3957 sdata
->vif
.bss_conf
.sync_device_ts
= 0;
3958 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3962 /* tell driver about BSSID, basic rates and timing */
3963 ieee80211_bss_info_change_notify(sdata
,
3964 BSS_CHANGED_BSSID
| BSS_CHANGED_BASIC_RATES
|
3965 BSS_CHANGED_BEACON_INT
);
3968 sta_info_pre_move_state(new_sta
, IEEE80211_STA_AUTH
);
3970 err
= sta_info_insert(new_sta
);
3974 "failed to insert STA entry for the AP (error %d)\n",
3979 WARN_ON_ONCE(!ether_addr_equal(ifmgd
->bssid
, cbss
->bssid
));
3985 int ieee80211_mgd_auth(struct ieee80211_sub_if_data
*sdata
,
3986 struct cfg80211_auth_request
*req
)
3988 struct ieee80211_local
*local
= sdata
->local
;
3989 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3990 struct ieee80211_mgd_auth_data
*auth_data
;
3994 /* prepare auth data structure */
3996 switch (req
->auth_type
) {
3997 case NL80211_AUTHTYPE_OPEN_SYSTEM
:
3998 auth_alg
= WLAN_AUTH_OPEN
;
4000 case NL80211_AUTHTYPE_SHARED_KEY
:
4001 if (IS_ERR(local
->wep_tx_tfm
))
4003 auth_alg
= WLAN_AUTH_SHARED_KEY
;
4005 case NL80211_AUTHTYPE_FT
:
4006 auth_alg
= WLAN_AUTH_FT
;
4008 case NL80211_AUTHTYPE_NETWORK_EAP
:
4009 auth_alg
= WLAN_AUTH_LEAP
;
4011 case NL80211_AUTHTYPE_SAE
:
4012 auth_alg
= WLAN_AUTH_SAE
;
4018 auth_data
= kzalloc(sizeof(*auth_data
) + req
->sae_data_len
+
4019 req
->ie_len
, GFP_KERNEL
);
4023 auth_data
->bss
= req
->bss
;
4025 if (req
->sae_data_len
>= 4) {
4026 __le16
*pos
= (__le16
*) req
->sae_data
;
4027 auth_data
->sae_trans
= le16_to_cpu(pos
[0]);
4028 auth_data
->sae_status
= le16_to_cpu(pos
[1]);
4029 memcpy(auth_data
->data
, req
->sae_data
+ 4,
4030 req
->sae_data_len
- 4);
4031 auth_data
->data_len
+= req
->sae_data_len
- 4;
4034 if (req
->ie
&& req
->ie_len
) {
4035 memcpy(&auth_data
->data
[auth_data
->data_len
],
4036 req
->ie
, req
->ie_len
);
4037 auth_data
->data_len
+= req
->ie_len
;
4040 if (req
->key
&& req
->key_len
) {
4041 auth_data
->key_len
= req
->key_len
;
4042 auth_data
->key_idx
= req
->key_idx
;
4043 memcpy(auth_data
->key
, req
->key
, req
->key_len
);
4046 auth_data
->algorithm
= auth_alg
;
4048 /* try to authenticate/probe */
4050 if ((ifmgd
->auth_data
&& !ifmgd
->auth_data
->done
) ||
4051 ifmgd
->assoc_data
) {
4056 if (ifmgd
->auth_data
)
4057 ieee80211_destroy_auth_data(sdata
, false);
4059 /* prep auth_data so we don't go into idle on disassoc */
4060 ifmgd
->auth_data
= auth_data
;
4062 if (ifmgd
->associated
) {
4063 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4065 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4066 WLAN_REASON_UNSPECIFIED
,
4069 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4073 sdata_info(sdata
, "authenticate with %pM\n", req
->bss
->bssid
);
4075 err
= ieee80211_prep_connection(sdata
, req
->bss
, false);
4079 err
= ieee80211_probe_auth(sdata
);
4081 sta_info_destroy_addr(sdata
, req
->bss
->bssid
);
4085 /* hold our own reference */
4086 cfg80211_ref_bss(local
->hw
.wiphy
, auth_data
->bss
);
4090 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
4091 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
4092 ifmgd
->auth_data
= NULL
;
4098 static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data
*sdata
,
4099 const u8
*wmm_param
, int len
)
4107 if (wmm_param
[5] != 1 /* version */)
4110 pos
= wmm_param
+ 8;
4113 for (; left
>= 4; left
-= 4, pos
+= 4) {
4114 u8 aifsn
= pos
[0] & 0x0f;
4115 u8 ecwmin
= pos
[1] & 0x0f;
4116 u8 ecwmax
= (pos
[1] & 0xf0) >> 4;
4117 int aci
= (pos
[0] >> 5) & 0x03;
4121 "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
4125 if (ecwmin
> ecwmax
) {
4127 "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
4128 ecwmin
, ecwmax
, aci
);
4136 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data
*sdata
,
4137 struct cfg80211_assoc_request
*req
)
4139 struct ieee80211_local
*local
= sdata
->local
;
4140 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4141 struct ieee80211_bss
*bss
= (void *)req
->bss
->priv
;
4142 struct ieee80211_mgd_assoc_data
*assoc_data
;
4143 const struct cfg80211_bss_ies
*beacon_ies
;
4144 struct ieee80211_supported_band
*sband
;
4145 const u8
*ssidie
, *ht_ie
, *vht_ie
;
4148 assoc_data
= kzalloc(sizeof(*assoc_data
) + req
->ie_len
, GFP_KERNEL
);
4153 ssidie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
4159 memcpy(assoc_data
->ssid
, ssidie
+ 2, ssidie
[1]);
4160 assoc_data
->ssid_len
= ssidie
[1];
4163 if (ifmgd
->associated
) {
4164 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4166 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4167 WLAN_REASON_UNSPECIFIED
,
4170 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4174 if (ifmgd
->auth_data
&& !ifmgd
->auth_data
->done
) {
4179 if (ifmgd
->assoc_data
) {
4184 if (ifmgd
->auth_data
) {
4187 /* keep sta info, bssid if matching */
4188 match
= ether_addr_equal(ifmgd
->bssid
, req
->bss
->bssid
);
4189 ieee80211_destroy_auth_data(sdata
, match
);
4192 /* prepare assoc data */
4194 ifmgd
->beacon_crc_valid
= false;
4196 assoc_data
->wmm
= bss
->wmm_used
&&
4197 (local
->hw
.queues
>= IEEE80211_NUM_ACS
);
4198 if (assoc_data
->wmm
) {
4199 /* try to check validity of WMM params IE */
4200 const struct cfg80211_bss_ies
*ies
;
4201 const u8
*wp
, *start
, *end
;
4204 ies
= rcu_dereference(req
->bss
->ies
);
4206 end
= start
+ ies
->len
;
4209 wp
= cfg80211_find_vendor_ie(
4211 WLAN_OUI_TYPE_MICROSOFT_WMM
,
4212 start
, end
- start
);
4215 start
= wp
+ wp
[1] + 2;
4216 /* if this IE is too short, try the next */
4219 /* if this IE is WMM params, we found what we wanted */
4224 if (!wp
|| !ieee80211_usable_wmm_params(sdata
, wp
+ 2,
4226 assoc_data
->wmm
= false;
4227 ifmgd
->flags
|= IEEE80211_STA_DISABLE_WMM
;
4233 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4234 * We still associate in non-HT mode (11a/b/g) if any one of these
4235 * ciphers is configured as pairwise.
4236 * We can set this to true for non-11n hardware, that'll be checked
4237 * separately along with the peer capabilities.
4239 for (i
= 0; i
< req
->crypto
.n_ciphers_pairwise
; i
++) {
4240 if (req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP40
||
4241 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_TKIP
||
4242 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP104
) {
4243 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4244 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4245 netdev_info(sdata
->dev
,
4246 "disabling HT/VHT due to WEP/TKIP use\n");
4250 if (req
->flags
& ASSOC_REQ_DISABLE_HT
) {
4251 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4252 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4255 if (req
->flags
& ASSOC_REQ_DISABLE_VHT
)
4256 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4258 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4259 sband
= local
->hw
.wiphy
->bands
[req
->bss
->channel
->band
];
4260 if (!sband
->ht_cap
.ht_supported
||
4261 local
->hw
.queues
< IEEE80211_NUM_ACS
|| !bss
->wmm_used
||
4262 ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) {
4263 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4264 if (!bss
->wmm_used
&&
4265 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
))
4266 netdev_info(sdata
->dev
,
4267 "disabling HT as WMM/QoS is not supported by the AP\n");
4270 /* disable VHT if we don't support it or the AP doesn't use WMM */
4271 if (!sband
->vht_cap
.vht_supported
||
4272 local
->hw
.queues
< IEEE80211_NUM_ACS
|| !bss
->wmm_used
||
4273 ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) {
4274 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4275 if (!bss
->wmm_used
&&
4276 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
))
4277 netdev_info(sdata
->dev
,
4278 "disabling VHT as WMM/QoS is not supported by the AP\n");
4281 memcpy(&ifmgd
->ht_capa
, &req
->ht_capa
, sizeof(ifmgd
->ht_capa
));
4282 memcpy(&ifmgd
->ht_capa_mask
, &req
->ht_capa_mask
,
4283 sizeof(ifmgd
->ht_capa_mask
));
4285 memcpy(&ifmgd
->vht_capa
, &req
->vht_capa
, sizeof(ifmgd
->vht_capa
));
4286 memcpy(&ifmgd
->vht_capa_mask
, &req
->vht_capa_mask
,
4287 sizeof(ifmgd
->vht_capa_mask
));
4289 if (req
->ie
&& req
->ie_len
) {
4290 memcpy(assoc_data
->ie
, req
->ie
, req
->ie_len
);
4291 assoc_data
->ie_len
= req
->ie_len
;
4294 assoc_data
->bss
= req
->bss
;
4296 if (ifmgd
->req_smps
== IEEE80211_SMPS_AUTOMATIC
) {
4297 if (ifmgd
->powersave
)
4298 sdata
->smps_mode
= IEEE80211_SMPS_DYNAMIC
;
4300 sdata
->smps_mode
= IEEE80211_SMPS_OFF
;
4302 sdata
->smps_mode
= ifmgd
->req_smps
;
4304 assoc_data
->capability
= req
->bss
->capability
;
4305 assoc_data
->supp_rates
= bss
->supp_rates
;
4306 assoc_data
->supp_rates_len
= bss
->supp_rates_len
;
4309 ht_ie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_HT_OPERATION
);
4310 if (ht_ie
&& ht_ie
[1] >= sizeof(struct ieee80211_ht_operation
))
4311 assoc_data
->ap_ht_param
=
4312 ((struct ieee80211_ht_operation
*)(ht_ie
+ 2))->ht_param
;
4314 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4315 vht_ie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_VHT_CAPABILITY
);
4316 if (vht_ie
&& vht_ie
[1] >= sizeof(struct ieee80211_vht_cap
))
4317 memcpy(&assoc_data
->ap_vht_cap
, vht_ie
+ 2,
4318 sizeof(struct ieee80211_vht_cap
));
4320 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4323 if (bss
->wmm_used
&& bss
->uapsd_supported
&&
4324 (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_UAPSD
) &&
4325 sdata
->wmm_acm
!= 0xff) {
4326 assoc_data
->uapsd
= true;
4327 ifmgd
->flags
|= IEEE80211_STA_UAPSD_ENABLED
;
4329 assoc_data
->uapsd
= false;
4330 ifmgd
->flags
&= ~IEEE80211_STA_UAPSD_ENABLED
;
4333 if (req
->prev_bssid
)
4334 memcpy(assoc_data
->prev_bssid
, req
->prev_bssid
, ETH_ALEN
);
4337 ifmgd
->mfp
= IEEE80211_MFP_REQUIRED
;
4338 ifmgd
->flags
|= IEEE80211_STA_MFP_ENABLED
;
4340 ifmgd
->mfp
= IEEE80211_MFP_DISABLED
;
4341 ifmgd
->flags
&= ~IEEE80211_STA_MFP_ENABLED
;
4344 if (req
->crypto
.control_port
)
4345 ifmgd
->flags
|= IEEE80211_STA_CONTROL_PORT
;
4347 ifmgd
->flags
&= ~IEEE80211_STA_CONTROL_PORT
;
4349 sdata
->control_port_protocol
= req
->crypto
.control_port_ethertype
;
4350 sdata
->control_port_no_encrypt
= req
->crypto
.control_port_no_encrypt
;
4351 sdata
->encrypt_headroom
= ieee80211_cs_headroom(local
, &req
->crypto
,
4354 /* kick off associate process */
4356 ifmgd
->assoc_data
= assoc_data
;
4357 ifmgd
->dtim_period
= 0;
4358 ifmgd
->have_beacon
= false;
4360 err
= ieee80211_prep_connection(sdata
, req
->bss
, true);
4365 beacon_ies
= rcu_dereference(req
->bss
->beacon_ies
);
4367 if (sdata
->local
->hw
.flags
& IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC
&&
4370 * Wait up to one beacon interval ...
4371 * should this be more if we miss one?
4373 sdata_info(sdata
, "waiting for beacon from %pM\n",
4375 assoc_data
->timeout
= TU_TO_EXP_TIME(req
->bss
->beacon_interval
);
4376 assoc_data
->timeout_started
= true;
4377 assoc_data
->need_beacon
= true;
4378 } else if (beacon_ies
) {
4379 const u8
*tim_ie
= cfg80211_find_ie(WLAN_EID_TIM
,
4384 if (tim_ie
&& tim_ie
[1] >= sizeof(struct ieee80211_tim_ie
)) {
4385 const struct ieee80211_tim_ie
*tim
;
4386 tim
= (void *)(tim_ie
+ 2);
4387 ifmgd
->dtim_period
= tim
->dtim_period
;
4388 dtim_count
= tim
->dtim_count
;
4390 ifmgd
->have_beacon
= true;
4391 assoc_data
->timeout
= jiffies
;
4392 assoc_data
->timeout_started
= true;
4394 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
4395 sdata
->vif
.bss_conf
.sync_tsf
= beacon_ies
->tsf
;
4396 sdata
->vif
.bss_conf
.sync_device_ts
=
4397 bss
->device_ts_beacon
;
4398 sdata
->vif
.bss_conf
.sync_dtim_count
= dtim_count
;
4401 assoc_data
->timeout
= jiffies
;
4402 assoc_data
->timeout_started
= true;
4406 run_again(sdata
, assoc_data
->timeout
);
4408 if (bss
->corrupt_data
) {
4409 char *corrupt_type
= "data";
4410 if (bss
->corrupt_data
& IEEE80211_BSS_CORRUPT_BEACON
) {
4411 if (bss
->corrupt_data
&
4412 IEEE80211_BSS_CORRUPT_PROBE_RESP
)
4413 corrupt_type
= "beacon and probe response";
4415 corrupt_type
= "beacon";
4416 } else if (bss
->corrupt_data
& IEEE80211_BSS_CORRUPT_PROBE_RESP
)
4417 corrupt_type
= "probe response";
4418 sdata_info(sdata
, "associating with AP with corrupt %s\n",
4424 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
4425 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
4426 ifmgd
->assoc_data
= NULL
;
4432 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data
*sdata
,
4433 struct cfg80211_deauth_request
*req
)
4435 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4436 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4437 bool tx
= !req
->local_state_change
;
4439 if (ifmgd
->auth_data
&&
4440 ether_addr_equal(ifmgd
->auth_data
->bss
->bssid
, req
->bssid
)) {
4442 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4443 req
->bssid
, req
->reason_code
,
4444 ieee80211_get_reason_code_string(req
->reason_code
));
4446 drv_mgd_prepare_tx(sdata
->local
, sdata
);
4447 ieee80211_send_deauth_disassoc(sdata
, req
->bssid
,
4448 IEEE80211_STYPE_DEAUTH
,
4449 req
->reason_code
, tx
,
4451 ieee80211_destroy_auth_data(sdata
, false);
4452 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4453 IEEE80211_DEAUTH_FRAME_LEN
);
4458 if (ifmgd
->associated
&&
4459 ether_addr_equal(ifmgd
->associated
->bssid
, req
->bssid
)) {
4461 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4462 req
->bssid
, req
->reason_code
,
4463 ieee80211_get_reason_code_string(req
->reason_code
));
4465 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4466 req
->reason_code
, tx
, frame_buf
);
4467 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4468 IEEE80211_DEAUTH_FRAME_LEN
);
4475 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data
*sdata
,
4476 struct cfg80211_disassoc_request
*req
)
4478 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4480 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4483 * cfg80211 should catch this ... but it's racy since
4484 * we can receive a disassoc frame, process it, hand it
4485 * to cfg80211 while that's in a locked section already
4486 * trying to tell us that the user wants to disconnect.
4488 if (ifmgd
->associated
!= req
->bss
)
4492 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4493 req
->bss
->bssid
, req
->reason_code
, ieee80211_get_reason_code_string(req
->reason_code
));
4495 memcpy(bssid
, req
->bss
->bssid
, ETH_ALEN
);
4496 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DISASSOC
,
4497 req
->reason_code
, !req
->local_state_change
,
4500 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4501 IEEE80211_DEAUTH_FRAME_LEN
);
4506 void ieee80211_mgd_stop(struct ieee80211_sub_if_data
*sdata
)
4508 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4511 * Make sure some work items will not run after this,
4512 * they will not do anything but might not have been
4513 * cancelled when disconnecting.
4515 cancel_work_sync(&ifmgd
->monitor_work
);
4516 cancel_work_sync(&ifmgd
->beacon_connection_loss_work
);
4517 cancel_work_sync(&ifmgd
->request_smps_work
);
4518 cancel_work_sync(&ifmgd
->csa_connection_drop_work
);
4519 cancel_work_sync(&ifmgd
->chswitch_work
);
4522 if (ifmgd
->assoc_data
) {
4523 struct cfg80211_bss
*bss
= ifmgd
->assoc_data
->bss
;
4524 ieee80211_destroy_assoc_data(sdata
, false);
4525 cfg80211_assoc_timeout(sdata
->dev
, bss
);
4527 if (ifmgd
->auth_data
)
4528 ieee80211_destroy_auth_data(sdata
, false);
4529 del_timer_sync(&ifmgd
->timer
);
4530 sdata_unlock(sdata
);
4533 void ieee80211_cqm_rssi_notify(struct ieee80211_vif
*vif
,
4534 enum nl80211_cqm_rssi_threshold_event rssi_event
,
4537 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
4539 trace_api_cqm_rssi_notify(sdata
, rssi_event
);
4541 cfg80211_cqm_rssi_notify(sdata
->dev
, rssi_event
, gfp
);
4543 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify
);