2 * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM
4 * Created by: Nicolas Pitre, March 2012
5 * Copyright: (C) 2012-2013 Linaro Limited
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/irqflags.h>
17 #include <asm/cacheflush.h>
18 #include <asm/idmap.h>
19 #include <asm/cputype.h>
21 extern unsigned long mcpm_entry_vectors
[MAX_NR_CLUSTERS
][MAX_CPUS_PER_CLUSTER
];
23 void mcpm_set_entry_vector(unsigned cpu
, unsigned cluster
, void *ptr
)
25 unsigned long val
= ptr
? virt_to_phys(ptr
) : 0;
26 mcpm_entry_vectors
[cluster
][cpu
] = val
;
27 sync_cache_w(&mcpm_entry_vectors
[cluster
][cpu
]);
30 extern unsigned long mcpm_entry_early_pokes
[MAX_NR_CLUSTERS
][MAX_CPUS_PER_CLUSTER
][2];
32 void mcpm_set_early_poke(unsigned cpu
, unsigned cluster
,
33 unsigned long poke_phys_addr
, unsigned long poke_val
)
35 unsigned long *poke
= &mcpm_entry_early_pokes
[cluster
][cpu
][0];
36 poke
[0] = poke_phys_addr
;
38 __sync_cache_range_w(poke
, 2 * sizeof(*poke
));
41 static const struct mcpm_platform_ops
*platform_ops
;
43 int __init
mcpm_platform_register(const struct mcpm_platform_ops
*ops
)
51 int mcpm_cpu_power_up(unsigned int cpu
, unsigned int cluster
)
54 return -EUNATCH
; /* try not to shadow power_up errors */
56 return platform_ops
->power_up(cpu
, cluster
);
59 typedef void (*phys_reset_t
)(unsigned long);
61 void mcpm_cpu_power_down(void)
63 phys_reset_t phys_reset
;
65 if (WARN_ON_ONCE(!platform_ops
|| !platform_ops
->power_down
))
67 BUG_ON(!irqs_disabled());
70 * Do this before calling into the power_down method,
71 * as it might not always be safe to do afterwards.
73 setup_mm_for_reboot();
75 platform_ops
->power_down();
78 * It is possible for a power_up request to happen concurrently
79 * with a power_down request for the same CPU. In this case the
80 * power_down method might not be able to actually enter a
81 * powered down state with the WFI instruction if the power_up
82 * method has removed the required reset condition. The
83 * power_down method is then allowed to return. We must perform
84 * a re-entry in the kernel as if the power_up method just had
85 * deasserted reset on the CPU.
87 * To simplify race issues, the platform specific implementation
88 * must accommodate for the possibility of unordered calls to
89 * power_down and power_up with a usage count. Therefore, if a
90 * call to power_up is issued for a CPU that is not down, then
91 * the next call to power_down must not attempt a full shutdown
92 * but only do the minimum (normally disabling L1 cache and CPU
93 * coherency) and return just as if a concurrent power_up request
94 * had happened as described above.
97 phys_reset
= (phys_reset_t
)(unsigned long)virt_to_phys(cpu_reset
);
98 phys_reset(virt_to_phys(mcpm_entry_point
));
100 /* should never get here */
104 int mcpm_cpu_power_down_finish(unsigned int cpu
, unsigned int cluster
)
108 if (WARN_ON_ONCE(!platform_ops
|| !platform_ops
->power_down_finish
))
111 ret
= platform_ops
->power_down_finish(cpu
, cluster
);
113 pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
114 __func__
, cpu
, cluster
, ret
);
119 void mcpm_cpu_suspend(u64 expected_residency
)
121 phys_reset_t phys_reset
;
123 if (WARN_ON_ONCE(!platform_ops
|| !platform_ops
->suspend
))
125 BUG_ON(!irqs_disabled());
127 /* Very similar to mcpm_cpu_power_down() */
128 setup_mm_for_reboot();
129 platform_ops
->suspend(expected_residency
);
130 phys_reset
= (phys_reset_t
)(unsigned long)virt_to_phys(cpu_reset
);
131 phys_reset(virt_to_phys(mcpm_entry_point
));
135 int mcpm_cpu_powered_up(void)
139 if (platform_ops
->powered_up
)
140 platform_ops
->powered_up();
144 struct sync_struct mcpm_sync
;
147 * __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
148 * This must be called at the point of committing to teardown of a CPU.
149 * The CPU cache (SCTRL.C bit) is expected to still be active.
151 void __mcpm_cpu_going_down(unsigned int cpu
, unsigned int cluster
)
153 mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
= CPU_GOING_DOWN
;
154 sync_cache_w(&mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
);
158 * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
159 * cluster can be torn down without disrupting this CPU.
160 * To avoid deadlocks, this must be called before a CPU is powered down.
161 * The CPU cache (SCTRL.C bit) is expected to be off.
162 * However L2 cache might or might not be active.
164 void __mcpm_cpu_down(unsigned int cpu
, unsigned int cluster
)
167 mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
= CPU_DOWN
;
168 sync_cache_w(&mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
);
173 * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
174 * @state: the final state of the cluster:
175 * CLUSTER_UP: no destructive teardown was done and the cluster has been
176 * restored to the previous state (CPU cache still active); or
177 * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
178 * (CPU cache disabled, L2 cache either enabled or disabled).
180 void __mcpm_outbound_leave_critical(unsigned int cluster
, int state
)
183 mcpm_sync
.clusters
[cluster
].cluster
= state
;
184 sync_cache_w(&mcpm_sync
.clusters
[cluster
].cluster
);
189 * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
190 * This function should be called by the last man, after local CPU teardown
191 * is complete. CPU cache expected to be active.
194 * false: the critical section was not entered because an inbound CPU was
195 * observed, or the cluster is already being set up;
196 * true: the critical section was entered: it is now safe to tear down the
199 bool __mcpm_outbound_enter_critical(unsigned int cpu
, unsigned int cluster
)
202 struct mcpm_sync_struct
*c
= &mcpm_sync
.clusters
[cluster
];
204 /* Warn inbound CPUs that the cluster is being torn down: */
205 c
->cluster
= CLUSTER_GOING_DOWN
;
206 sync_cache_w(&c
->cluster
);
208 /* Back out if the inbound cluster is already in the critical region: */
209 sync_cache_r(&c
->inbound
);
210 if (c
->inbound
== INBOUND_COMING_UP
)
214 * Wait for all CPUs to get out of the GOING_DOWN state, so that local
215 * teardown is complete on each CPU before tearing down the cluster.
217 * If any CPU has been woken up again from the DOWN state, then we
218 * shouldn't be taking the cluster down at all: abort in that case.
220 sync_cache_r(&c
->cpus
);
221 for (i
= 0; i
< MAX_CPUS_PER_CLUSTER
; i
++) {
228 cpustate
= c
->cpus
[i
].cpu
;
229 if (cpustate
!= CPU_GOING_DOWN
)
233 sync_cache_r(&c
->cpus
[i
].cpu
);
248 __mcpm_outbound_leave_critical(cluster
, CLUSTER_UP
);
252 int __mcpm_cluster_state(unsigned int cluster
)
254 sync_cache_r(&mcpm_sync
.clusters
[cluster
].cluster
);
255 return mcpm_sync
.clusters
[cluster
].cluster
;
258 extern unsigned long mcpm_power_up_setup_phys
;
260 int __init
mcpm_sync_init(
261 void (*power_up_setup
)(unsigned int affinity_level
))
263 unsigned int i
, j
, mpidr
, this_cluster
;
265 BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE
* MAX_NR_CLUSTERS
!= sizeof mcpm_sync
);
266 BUG_ON((unsigned long)&mcpm_sync
& (__CACHE_WRITEBACK_GRANULE
- 1));
269 * Set initial CPU and cluster states.
270 * Only one cluster is assumed to be active at this point.
272 for (i
= 0; i
< MAX_NR_CLUSTERS
; i
++) {
273 mcpm_sync
.clusters
[i
].cluster
= CLUSTER_DOWN
;
274 mcpm_sync
.clusters
[i
].inbound
= INBOUND_NOT_COMING_UP
;
275 for (j
= 0; j
< MAX_CPUS_PER_CLUSTER
; j
++)
276 mcpm_sync
.clusters
[i
].cpus
[j
].cpu
= CPU_DOWN
;
278 mpidr
= read_cpuid_mpidr();
279 this_cluster
= MPIDR_AFFINITY_LEVEL(mpidr
, 1);
280 for_each_online_cpu(i
)
281 mcpm_sync
.clusters
[this_cluster
].cpus
[i
].cpu
= CPU_UP
;
282 mcpm_sync
.clusters
[this_cluster
].cluster
= CLUSTER_UP
;
283 sync_cache_w(&mcpm_sync
);
285 if (power_up_setup
) {
286 mcpm_power_up_setup_phys
= virt_to_phys(power_up_setup
);
287 sync_cache_w(&mcpm_power_up_setup_phys
);