arch/arm/mach-at91/include/mach/at91_adc.h

   1 /*
   2  * arch/arm/mach-at91/include/mach/at91_adc.h
   3  *
   4  * Copyright (C) SAN People
   5  *
   6  * Analog-to-Digital Converter (ADC) registers.
   7  * Based on AT91SAM9260 datasheet revision D.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  */
  14
  15 #ifndef AT91_ADC_H
  16 #define AT91_ADC_H
  17
  18 #define AT91_ADC_CR             0x00            /* Control Register */
  19 #define         AT91_ADC_SWRST          (1 << 0)        /* Software Reset */
  20 #define         AT91_ADC_START          (1 << 1)        /* Start Conversion */
  21
  22 #define AT91_ADC_MR             0x04            /* Mode Register */
  23 #define         AT91_ADC_TRGEN          (1 << 0)        /* Trigger Enable */
  24 #define         AT91_ADC_TRGSEL         (7 << 1)        /* Trigger Selection */
  25 #define                 AT91_ADC_TRGSEL_TC0             (0 << 1)
  26 #define                 AT91_ADC_TRGSEL_TC1             (1 << 1)
  27 #define                 AT91_ADC_TRGSEL_TC2             (2 << 1)
  28 #define                 AT91_ADC_TRGSEL_EXTERNAL        (6 << 1)
  29 #define         AT91_ADC_LOWRES         (1 << 4)        /* Low Resolution */
  30 #define         AT91_ADC_SLEEP          (1 << 5)        /* Sleep Mode */
  31 #define         AT91_ADC_PRESCAL_9260   (0x3f << 8)     /* Prescalar Rate Selection */
  32 #define         AT91_ADC_PRESCAL_9G45   (0xff << 8)
  33 #define                 AT91_ADC_PRESCAL_(x)    ((x) << 8)
  34 #define         AT91_ADC_STARTUP_9260   (0x1f << 16)    /* Startup Up Time */
  35 #define         AT91_ADC_STARTUP_9G45   (0x7f << 16)
  36 #define         AT91_ADC_STARTUP_9X5    (0xf << 16)
  37 #define                 AT91_ADC_STARTUP_(x)    ((x) << 16)
  38 #define         AT91_ADC_SHTIM          (0xf  << 24)    /* Sample & Hold Time */
  39 #define                 AT91_ADC_SHTIM_(x)      ((x) << 24)
  40
  41 #define AT91_ADC_CHER           0x10            /* Channel Enable Register */
  42 #define AT91_ADC_CHDR           0x14            /* Channel Disable Register */
  43 #define AT91_ADC_CHSR           0x18            /* Channel Status Register */
  44 #define         AT91_ADC_CH(n)          (1 << (n))      /* Channel Number */
  45
  46 #define AT91_ADC_SR             0x1C            /* Status Register */
  47 #define         AT91_ADC_EOC(n)         (1 << (n))      /* End of Conversion on Channel N */
  48 #define         AT91_ADC_OVRE(n)        (1 << ((n) + 8))/* Overrun Error on Channel N */
  49 #define         AT91_ADC_DRDY           (1 << 16)       /* Data Ready */
  50 #define         AT91_ADC_GOVRE          (1 << 17)       /* General Overrun Error */
  51 #define         AT91_ADC_ENDRX          (1 << 18)       /* End of RX Buffer */
  52 #define         AT91_ADC_RXFUFF         (1 << 19)       /* RX Buffer Full */
  53
  54 #define AT91_ADC_SR_9X5         0x30            /* Status Register for 9x5 */
  55 #define         AT91_ADC_SR_DRDY_9X5    (1 << 24)       /* Data Ready */
  56
  57 #define AT91_ADC_LCDR           0x20            /* Last Converted Data Register */
  58 #define         AT91_ADC_LDATA          (0x3ff)
  59
  60 #define AT91_ADC_IER            0x24            /* Interrupt Enable Register */
  61 #define AT91_ADC_IDR            0x28            /* Interrupt Disable Register */
  62 #define AT91_ADC_IMR            0x2C            /* Interrupt Mask Register */
  63 #define         AT91_ADC_IER_PEN        (1 << 29)
  64 #define         AT91_ADC_IER_NOPEN      (1 << 30)
  65 #define         AT91_ADC_IER_XRDY       (1 << 20)
  66 #define         AT91_ADC_IER_YRDY       (1 << 21)
  67 #define         AT91_ADC_IER_PRDY       (1 << 22)
  68 #define         AT91_ADC_ISR_PENS       (1 << 31)
  69
  70 #define AT91_ADC_CHR(n)         (0x30 + ((n) * 4))      /* Channel Data Register N */
  71 #define         AT91_ADC_DATA           (0x3ff)
  72
  73 #define AT91_ADC_CDR0_9X5       (0x50)                  /* Channel Data Register 0 for 9X5 */
  74
  75 #define AT91_ADC_ACR            0x94    /* Analog Control Register */
  76 #define         AT91_ADC_ACR_PENDETSENS (0x3 << 0)      /* pull-up resistor */
  77
  78 #define AT91_ADC_TSMR           0xB0
  79 #define         AT91_ADC_TSMR_TSMODE    (3 << 0)        /* Touch Screen Mode */
  80 #define                 AT91_ADC_TSMR_TSMODE_NONE               (0 << 0)
  81 #define                 AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS     (1 << 0)
  82 #define                 AT91_ADC_TSMR_TSMODE_4WIRE_PRESS        (2 << 0)
  83 #define                 AT91_ADC_TSMR_TSMODE_5WIRE              (3 << 0)
  84 #define         AT91_ADC_TSMR_TSAV      (3 << 4)        /* Averages samples */
  85 #define                 AT91_ADC_TSMR_TSAV_(x)          ((x) << 4)
  86 #define         AT91_ADC_TSMR_SCTIM     (0x0f << 16)    /* Switch closure time */
  87 #define         AT91_ADC_TSMR_PENDBC    (0x0f << 28)    /* Pen Debounce time */
  88 #define                 AT91_ADC_TSMR_PENDBC_(x)        ((x) << 28)
  89 #define         AT91_ADC_TSMR_NOTSDMA   (1 << 22)       /* No Touchscreen DMA */
  90 #define         AT91_ADC_TSMR_PENDET_DIS        (0 << 24)       /* Pen contact detection disable */
  91 #define         AT91_ADC_TSMR_PENDET_ENA        (1 << 24)       /* Pen contact detection enable */
  92
  93 #define AT91_ADC_TSXPOSR        0xB4
  94 #define AT91_ADC_TSYPOSR        0xB8
  95 #define AT91_ADC_TSPRESSR       0xBC
  96
  97 #define AT91_ADC_TRGR_9260      AT91_ADC_MR
  98 #define AT91_ADC_TRGR_9G45      0x08
  99 #define AT91_ADC_TRGR_9X5       0xC0
 100
 101 /* Trigger Register bit field */
 102 #define         AT91_ADC_TRGR_TRGPER    (0xffff << 16)
 103 #define                 AT91_ADC_TRGR_TRGPER_(x)        ((x) << 16)
 104 #define         AT91_ADC_TRGR_TRGMOD    (0x7 << 0)
 105 #define                 AT91_ADC_TRGR_MOD_PERIOD_TRIG   (5 << 0)
 106
 107 #endif