arch/arm/mach-pxa/pxa3xx.c

   1 /*
   2  * linux/arch/arm/mach-pxa/pxa3xx.c
   3  *
   4  * code specific to pxa3xx aka Monahans
   5  *
   6  * Copyright (C) 2006 Marvell International Ltd.
   7  *
   8  * 2007-09-02: eric miao <eric.miao@marvell.com>
   9  *             initial version
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15 #include <linux/module.h>
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/gpio-pxa.h>
  19 #include <linux/pm.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/irq.h>
  22 #include <linux/io.h>
  23 #include <linux/of.h>
  24 #include <linux/syscore_ops.h>
  25 #include <linux/i2c/pxa-i2c.h>
  26
  27 #include <asm/mach/map.h>
  28 #include <asm/suspend.h>
  29 #include <mach/hardware.h>
  30 #include <mach/pxa3xx-regs.h>
  31 #include <mach/reset.h>
  32 #include <linux/platform_data/usb-ohci-pxa27x.h>
  33 #include <mach/pm.h>
  34 #include <mach/dma.h>
  35 #include <mach/smemc.h>
  36 #include <mach/irqs.h>
  37
  38 #include "generic.h"
  39 #include "devices.h"
  40 #include "clock.h"
  41
  42 #define PECR_IE(n)      ((1 << ((n) * 2)) << 28)
  43 #define PECR_IS(n)      ((1 << ((n) * 2)) << 29)
  44
  45 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
  46
  47 static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
  48 static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
  49 static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
  50 static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
  51 static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
  52 static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
  53 static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
  54 static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
  55 static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
  56 static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
  57 static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
  58 static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
  59 static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
  60 static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
  61 static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
  62 static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
  63 static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
  64
  65 static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
  66 static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
  67 static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
  68 static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
  69 static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
  70
  71 static struct clk_lookup pxa3xx_clkregs[] = {
  72         INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
  73         /* Power I2C clock is always on */
  74         INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
  75         INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
  76         INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
  77         INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
  78         INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
  79         INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
  80         INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
  81         INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
  82         INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
  83         INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
  84         INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
  85         INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
  86         INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
  87         INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
  88         INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
  89         INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL),
  90         INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL),
  91         INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
  92         INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
  93         INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
  94         INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
  95         INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
  96         INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL),
  97         INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL),
  98         INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
  99 };
 100
 101 #ifdef CONFIG_PM
 102
 103 #define ISRAM_START     0x5c000000
 104 #define ISRAM_SIZE      SZ_256K
 105
 106 static void __iomem *sram;
 107 static unsigned long wakeup_src;
 108
 109 /*
 110  * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
 111  * memory controller has to be reinitialised, so we place some code
 112  * in the SRAM to perform this function.
 113  *
 114  * We disable FIQs across the standby - otherwise, we might receive a
 115  * FIQ while the SDRAM is unavailable.
 116  */
 117 static void pxa3xx_cpu_standby(unsigned int pwrmode)
 118 {
 119         extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 120         void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
 121
 122         memcpy_toio(sram + 0x8000, pm_enter_standby_start,
 123                     pm_enter_standby_end - pm_enter_standby_start);
 124
 125         AD2D0SR = ~0;
 126         AD2D1SR = ~0;
 127         AD2D0ER = wakeup_src;
 128         AD2D1ER = 0;
 129         ASCR = ASCR;
 130         ARSR = ARSR;
 131
 132         local_fiq_disable();
 133         fn(pwrmode);
 134         local_fiq_enable();
 135
 136         AD2D0ER = 0;
 137         AD2D1ER = 0;
 138 }
 139
 140 /*
 141  * NOTE:  currently, the OBM (OEM Boot Module) binary comes along with
 142  * PXA3xx development kits assumes that the resuming process continues
 143  * with the address stored within the first 4 bytes of SDRAM. The PSPR
 144  * register is used privately by BootROM and OBM, and _must_ be set to
 145  * 0x5c014000 for the moment.
 146  */
 147 static void pxa3xx_cpu_pm_suspend(void)
 148 {
 149         volatile unsigned long *p = (volatile void *)0xc0000000;
 150         unsigned long saved_data = *p;
 151 #ifndef CONFIG_IWMMXT
 152         u64 acc0;
 153
 154         asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
 155 #endif
 156
 157         extern int pxa3xx_finish_suspend(unsigned long);
 158
 159         /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 160         CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
 161         CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
 162
 163         /* clear and setup wakeup source */
 164         AD3SR = ~0;
 165         AD3ER = wakeup_src;
 166         ASCR = ASCR;
 167         ARSR = ARSR;
 168
 169         PCFR |= (1u << 13);                     /* L1_DIS */
 170         PCFR &= ~((1u << 12) | (1u << 1));      /* L0_EN | SL_ROD */
 171
 172         PSPR = 0x5c014000;
 173
 174         /* overwrite with the resume address */
 175         *p = virt_to_phys(cpu_resume);
 176
 177         cpu_suspend(0, pxa3xx_finish_suspend);
 178
 179         *p = saved_data;
 180
 181         AD3ER = 0;
 182
 183 #ifndef CONFIG_IWMMXT
 184         asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
 185 #endif
 186 }
 187
 188 static void pxa3xx_cpu_pm_enter(suspend_state_t state)
 189 {
 190         /*
 191          * Don't sleep if no wakeup sources are defined
 192          */
 193         if (wakeup_src == 0) {
 194                 printk(KERN_ERR "Not suspending: no wakeup sources\n");
 195                 return;
 196         }
 197
 198         switch (state) {
 199         case PM_SUSPEND_STANDBY:
 200                 pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
 201                 break;
 202
 203         case PM_SUSPEND_MEM:
 204                 pxa3xx_cpu_pm_suspend();
 205                 break;
 206         }
 207 }
 208
 209 static int pxa3xx_cpu_pm_valid(suspend_state_t state)
 210 {
 211         return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
 212 }
 213
 214 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
 215         .valid          = pxa3xx_cpu_pm_valid,
 216         .enter          = pxa3xx_cpu_pm_enter,
 217 };
 218
 219 static void __init pxa3xx_init_pm(void)
 220 {
 221         sram = ioremap(ISRAM_START, ISRAM_SIZE);
 222         if (!sram) {
 223                 printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
 224                 return;
 225         }
 226
 227         /*
 228          * Since we copy wakeup code into the SRAM, we need to ensure
 229          * that it is preserved over the low power modes.  Note: bit 8
 230          * is undocumented in the developer manual, but must be set.
 231          */
 232         AD1R |= ADXR_L2 | ADXR_R0;
 233         AD2R |= ADXR_L2 | ADXR_R0;
 234         AD3R |= ADXR_L2 | ADXR_R0;
 235
 236         /*
 237          * Clear the resume enable registers.
 238          */
 239         AD1D0ER = 0;
 240         AD2D0ER = 0;
 241         AD2D1ER = 0;
 242         AD3ER = 0;
 243
 244         pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
 245 }
 246
 247 static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
 248 {
 249         unsigned long flags, mask = 0;
 250
 251         switch (d->irq) {
 252         case IRQ_SSP3:
 253                 mask = ADXER_MFP_WSSP3;
 254                 break;
 255         case IRQ_MSL:
 256                 mask = ADXER_WMSL0;
 257                 break;
 258         case IRQ_USBH2:
 259         case IRQ_USBH1:
 260                 mask = ADXER_WUSBH;
 261                 break;
 262         case IRQ_KEYPAD:
 263                 mask = ADXER_WKP;
 264                 break;
 265         case IRQ_AC97:
 266                 mask = ADXER_MFP_WAC97;
 267                 break;
 268         case IRQ_USIM:
 269                 mask = ADXER_WUSIM0;
 270                 break;
 271         case IRQ_SSP2:
 272                 mask = ADXER_MFP_WSSP2;
 273                 break;
 274         case IRQ_I2C:
 275                 mask = ADXER_MFP_WI2C;
 276                 break;
 277         case IRQ_STUART:
 278                 mask = ADXER_MFP_WUART3;
 279                 break;
 280         case IRQ_BTUART:
 281                 mask = ADXER_MFP_WUART2;
 282                 break;
 283         case IRQ_FFUART:
 284                 mask = ADXER_MFP_WUART1;
 285                 break;
 286         case IRQ_MMC:
 287                 mask = ADXER_MFP_WMMC1;
 288                 break;
 289         case IRQ_SSP:
 290                 mask = ADXER_MFP_WSSP1;
 291                 break;
 292         case IRQ_RTCAlrm:
 293                 mask = ADXER_WRTC;
 294                 break;
 295         case IRQ_SSP4:
 296                 mask = ADXER_MFP_WSSP4;
 297                 break;
 298         case IRQ_TSI:
 299                 mask = ADXER_WTSI;
 300                 break;
 301         case IRQ_USIM2:
 302                 mask = ADXER_WUSIM1;
 303                 break;
 304         case IRQ_MMC2:
 305                 mask = ADXER_MFP_WMMC2;
 306                 break;
 307         case IRQ_NAND:
 308                 mask = ADXER_MFP_WFLASH;
 309                 break;
 310         case IRQ_USB2:
 311                 mask = ADXER_WUSB2;
 312                 break;
 313         case IRQ_WAKEUP0:
 314                 mask = ADXER_WEXTWAKE0;
 315                 break;
 316         case IRQ_WAKEUP1:
 317                 mask = ADXER_WEXTWAKE1;
 318                 break;
 319         case IRQ_MMC3:
 320                 mask = ADXER_MFP_GEN12;
 321                 break;
 322         default:
 323                 return -EINVAL;
 324         }
 325
 326         local_irq_save(flags);
 327         if (on)
 328                 wakeup_src |= mask;
 329         else
 330                 wakeup_src &= ~mask;
 331         local_irq_restore(flags);
 332
 333         return 0;
 334 }
 335 #else
 336 static inline void pxa3xx_init_pm(void) {}
 337 #define pxa3xx_set_wake NULL
 338 #endif
 339
 340 static void pxa_ack_ext_wakeup(struct irq_data *d)
 341 {
 342         PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
 343 }
 344
 345 static void pxa_mask_ext_wakeup(struct irq_data *d)
 346 {
 347         pxa_mask_irq(d);
 348         PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
 349 }
 350
 351 static void pxa_unmask_ext_wakeup(struct irq_data *d)
 352 {
 353         pxa_unmask_irq(d);
 354         PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
 355 }
 356
 357 static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
 358 {
 359         if (flow_type & IRQ_TYPE_EDGE_RISING)
 360                 PWER |= 1 << (d->irq - IRQ_WAKEUP0);
 361
 362         if (flow_type & IRQ_TYPE_EDGE_FALLING)
 363                 PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);
 364
 365         return 0;
 366 }
 367
 368 static struct irq_chip pxa_ext_wakeup_chip = {
 369         .name           = "WAKEUP",
 370         .irq_ack        = pxa_ack_ext_wakeup,
 371         .irq_mask       = pxa_mask_ext_wakeup,
 372         .irq_unmask     = pxa_unmask_ext_wakeup,
 373         .irq_set_type   = pxa_set_ext_wakeup_type,
 374 };
 375
 376 static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
 377                                            unsigned int))
 378 {
 379         int irq;
 380
 381         for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
 382                 irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
 383                                          handle_edge_irq);
 384                 set_irq_flags(irq, IRQF_VALID);
 385         }
 386
 387         pxa_ext_wakeup_chip.irq_set_wake = fn;
 388 }
 389
 390 static void __init __pxa3xx_init_irq(void)
 391 {
 392         /* enable CP6 access */
 393         u32 value;
 394         __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
 395         value |= (1 << 6);
 396         __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 397
 398         pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 399 }
 400
 401 void __init pxa3xx_init_irq(void)
 402 {
 403         __pxa3xx_init_irq();
 404         pxa_init_irq(56, pxa3xx_set_wake);
 405 }
 406
 407 #ifdef CONFIG_OF
 408 void __init pxa3xx_dt_init_irq(void)
 409 {
 410         __pxa3xx_init_irq();
 411         pxa_dt_irq_init(pxa3xx_set_wake);
 412 }
 413 #endif  /* CONFIG_OF */
 414
 415 static struct map_desc pxa3xx_io_desc[] __initdata = {
 416         {       /* Mem Ctl */
 417                 .virtual        = (unsigned long)SMEMC_VIRT,
 418                 .pfn            = __phys_to_pfn(PXA3XX_SMEMC_BASE),
 419                 .length         = 0x00200000,
 420                 .type           = MT_DEVICE
 421         }
 422 };
 423
 424 void __init pxa3xx_map_io(void)
 425 {
 426         pxa_map_io();
 427         iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
 428         pxa3xx_get_clk_frequency_khz(1);
 429 }
 430
 431 /*
 432  * device registration specific to PXA3xx.
 433  */
 434
 435 void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 436 {
 437         pxa_register_device(&pxa3xx_device_i2c_power, info);
 438 }
 439
 440 static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
 441         .irq_base       = PXA_GPIO_TO_IRQ(0),
 442 };
 443
 444 static struct platform_device *devices[] __initdata = {
 445         &pxa27x_device_udc,
 446         &pxa_device_pmu,
 447         &pxa_device_i2s,
 448         &pxa_device_asoc_ssp1,
 449         &pxa_device_asoc_ssp2,
 450         &pxa_device_asoc_ssp3,
 451         &pxa_device_asoc_ssp4,
 452         &pxa_device_asoc_platform,
 453         &sa1100_device_rtc,
 454         &pxa_device_rtc,
 455         &pxa27x_device_ssp1,
 456         &pxa27x_device_ssp2,
 457         &pxa27x_device_ssp3,
 458         &pxa3xx_device_ssp4,
 459         &pxa27x_device_pwm0,
 460         &pxa27x_device_pwm1,
 461 };
 462
 463 static int __init pxa3xx_init(void)
 464 {
 465         int ret = 0;
 466
 467         if (cpu_is_pxa3xx()) {
 468
 469                 reset_status = ARSR;
 470
 471                 /*
 472                  * clear RDH bit every time after reset
 473                  *
 474                  * Note: the last 3 bits DxS are write-1-to-clear so carefully
 475                  * preserve them here in case they will be referenced later
 476                  */
 477                 ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
 478
 479                 clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
 480
 481                 if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 482                         return ret;
 483
 484                 pxa3xx_init_pm();
 485
 486                 register_syscore_ops(&pxa_irq_syscore_ops);
 487                 register_syscore_ops(&pxa3xx_mfp_syscore_ops);
 488                 register_syscore_ops(&pxa3xx_clock_syscore_ops);
 489
 490                 if (of_have_populated_dt())
 491                         return 0;
 492
 493                 ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 494                 if (ret)
 495                         return ret;
 496                 if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
 497                         platform_device_add_data(&pxa3xx_device_gpio,
 498                                                  &pxa3xx_gpio_pdata,
 499                                                  sizeof(pxa3xx_gpio_pdata));
 500                         ret = platform_device_register(&pxa3xx_device_gpio);
 501                 }
 502         }
 503
 504         return ret;
 505 }
 506
 507 postcore_initcall(pxa3xx_init);