2 * linux/arch/arm/mach-sa1100/generic.c
4 * Author: Nicolas Pitre
6 * Code common to all SA11x0 machines.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 #include <linux/gpio.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/dma-mapping.h>
19 #include <linux/cpufreq.h>
20 #include <linux/ioport.h>
21 #include <linux/platform_device.h>
22 #include <linux/reboot.h>
24 #include <video/sa1100fb.h>
26 #include <asm/div64.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/flash.h>
30 #include <asm/system_misc.h>
32 #include <mach/hardware.h>
33 #include <mach/irqs.h>
37 unsigned int reset_status
;
38 EXPORT_SYMBOL(reset_status
);
43 * This table is setup for a 3.6864MHz Crystal.
45 struct cpufreq_frequency_table sa11x0_freq_table
[NR_FREQS
+1] = {
46 { .frequency
= 59000, /* 59.0 MHz */},
47 { .frequency
= 73700, /* 73.7 MHz */},
48 { .frequency
= 88500, /* 88.5 MHz */},
49 { .frequency
= 103200, /* 103.2 MHz */},
50 { .frequency
= 118000, /* 118.0 MHz */},
51 { .frequency
= 132700, /* 132.7 MHz */},
52 { .frequency
= 147500, /* 147.5 MHz */},
53 { .frequency
= 162200, /* 162.2 MHz */},
54 { .frequency
= 176900, /* 176.9 MHz */},
55 { .frequency
= 191700, /* 191.7 MHz */},
56 { .frequency
= 206400, /* 206.4 MHz */},
57 { .frequency
= 221200, /* 221.2 MHz */},
58 { .frequency
= 235900, /* 235.9 MHz */},
59 { .frequency
= 250700, /* 250.7 MHz */},
60 { .frequency
= 265400, /* 265.4 MHz */},
61 { .frequency
= 280200, /* 280.2 MHz */},
62 { .frequency
= CPUFREQ_TABLE_END
, },
65 unsigned int sa11x0_getspeed(unsigned int cpu
)
69 return sa11x0_freq_table
[PPCR
& 0xf].frequency
;
73 * Default power-off for SA1100
75 static void sa1100_power_off(void)
79 /* disable internal oscillator, float CS lines */
80 PCFR
= (PCFR_OPDE
| PCFR_FP
| PCFR_FS
);
81 /* enable wake-up on GPIO0 (Assabet...) */
82 PWER
= GFER
= GRER
= 1;
84 * set scratchpad to zero, just in case it is used as a
85 * restart address by the bootloader.
88 /* enter sleep mode */
92 void sa11x0_restart(enum reboot_mode mode
, const char *cmd
)
94 if (mode
== REBOOT_SOFT
) {
95 /* Jump into ROM at address 0 */
98 /* Use on-chip reset capability */
103 static void sa11x0_register_device(struct platform_device
*dev
, void *data
)
106 dev
->dev
.platform_data
= data
;
107 err
= platform_device_register(dev
);
109 printk(KERN_ERR
"Unable to register device %s: %d\n",
114 static struct resource sa11x0udc_resources
[] = {
115 [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR
), SZ_64K
),
116 [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC
),
119 static u64 sa11x0udc_dma_mask
= 0xffffffffUL
;
121 static struct platform_device sa11x0udc_device
= {
122 .name
= "sa11x0-udc",
125 .dma_mask
= &sa11x0udc_dma_mask
,
126 .coherent_dma_mask
= 0xffffffff,
128 .num_resources
= ARRAY_SIZE(sa11x0udc_resources
),
129 .resource
= sa11x0udc_resources
,
132 static struct resource sa11x0uart1_resources
[] = {
133 [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0
), SZ_64K
),
134 [1] = DEFINE_RES_IRQ(IRQ_Ser1UART
),
137 static struct platform_device sa11x0uart1_device
= {
138 .name
= "sa11x0-uart",
140 .num_resources
= ARRAY_SIZE(sa11x0uart1_resources
),
141 .resource
= sa11x0uart1_resources
,
144 static struct resource sa11x0uart3_resources
[] = {
145 [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0
), SZ_64K
),
146 [1] = DEFINE_RES_IRQ(IRQ_Ser3UART
),
149 static struct platform_device sa11x0uart3_device
= {
150 .name
= "sa11x0-uart",
152 .num_resources
= ARRAY_SIZE(sa11x0uart3_resources
),
153 .resource
= sa11x0uart3_resources
,
156 static struct resource sa11x0mcp_resources
[] = {
157 [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0
), SZ_64K
),
158 [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1
), 4),
159 [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP
),
162 static u64 sa11x0mcp_dma_mask
= 0xffffffffUL
;
164 static struct platform_device sa11x0mcp_device
= {
165 .name
= "sa11x0-mcp",
168 .dma_mask
= &sa11x0mcp_dma_mask
,
169 .coherent_dma_mask
= 0xffffffff,
171 .num_resources
= ARRAY_SIZE(sa11x0mcp_resources
),
172 .resource
= sa11x0mcp_resources
,
175 void __init
sa11x0_ppc_configure_mcp(void)
177 /* Setup the PPC unit for the MCP */
179 PPDR
|= PPC_TXD4
| PPC_SCLK
| PPC_SFRM
;
181 PSDR
&= ~(PPC_TXD4
| PPC_SCLK
| PPC_SFRM
);
182 PPSR
&= ~(PPC_TXD4
| PPC_SCLK
| PPC_SFRM
);
185 void sa11x0_register_mcp(struct mcp_plat_data
*data
)
187 sa11x0_register_device(&sa11x0mcp_device
, data
);
190 static struct resource sa11x0ssp_resources
[] = {
191 [0] = DEFINE_RES_MEM(0x80070000, SZ_64K
),
192 [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP
),
195 static u64 sa11x0ssp_dma_mask
= 0xffffffffUL
;
197 static struct platform_device sa11x0ssp_device
= {
198 .name
= "sa11x0-ssp",
201 .dma_mask
= &sa11x0ssp_dma_mask
,
202 .coherent_dma_mask
= 0xffffffff,
204 .num_resources
= ARRAY_SIZE(sa11x0ssp_resources
),
205 .resource
= sa11x0ssp_resources
,
208 static struct resource sa11x0fb_resources
[] = {
209 [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K
),
210 [1] = DEFINE_RES_IRQ(IRQ_LCD
),
213 static struct platform_device sa11x0fb_device
= {
217 .coherent_dma_mask
= 0xffffffff,
219 .num_resources
= ARRAY_SIZE(sa11x0fb_resources
),
220 .resource
= sa11x0fb_resources
,
223 void sa11x0_register_lcd(struct sa1100fb_mach_info
*inf
)
225 sa11x0_register_device(&sa11x0fb_device
, inf
);
228 static struct platform_device sa11x0pcmcia_device
= {
229 .name
= "sa11x0-pcmcia",
233 static struct platform_device sa11x0mtd_device
= {
234 .name
= "sa1100-mtd",
238 void sa11x0_register_mtd(struct flash_platform_data
*flash
,
239 struct resource
*res
, int nr
)
241 flash
->name
= "sa1100";
242 sa11x0mtd_device
.resource
= res
;
243 sa11x0mtd_device
.num_resources
= nr
;
244 sa11x0_register_device(&sa11x0mtd_device
, flash
);
247 static struct resource sa11x0ir_resources
[] = {
248 DEFINE_RES_MEM(__PREG(Ser2UTCR0
), 0x24),
249 DEFINE_RES_MEM(__PREG(Ser2HSCR0
), 0x1c),
250 DEFINE_RES_MEM(__PREG(Ser2HSCR2
), 0x04),
251 DEFINE_RES_IRQ(IRQ_Ser2ICP
),
254 static struct platform_device sa11x0ir_device
= {
257 .num_resources
= ARRAY_SIZE(sa11x0ir_resources
),
258 .resource
= sa11x0ir_resources
,
261 void sa11x0_register_irda(struct irda_platform_data
*irda
)
263 sa11x0_register_device(&sa11x0ir_device
, irda
);
266 static struct resource sa1100_rtc_resources
[] = {
267 DEFINE_RES_MEM(0x90010000, 0x40),
268 DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz
, "rtc 1Hz"),
269 DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm
, "rtc alarm"),
272 static struct platform_device sa11x0rtc_device
= {
273 .name
= "sa1100-rtc",
275 .num_resources
= ARRAY_SIZE(sa1100_rtc_resources
),
276 .resource
= sa1100_rtc_resources
,
279 static struct resource sa11x0dma_resources
[] = {
280 DEFINE_RES_MEM(DMA_PHYS
, DMA_SIZE
),
281 DEFINE_RES_IRQ(IRQ_DMA0
),
282 DEFINE_RES_IRQ(IRQ_DMA1
),
283 DEFINE_RES_IRQ(IRQ_DMA2
),
284 DEFINE_RES_IRQ(IRQ_DMA3
),
285 DEFINE_RES_IRQ(IRQ_DMA4
),
286 DEFINE_RES_IRQ(IRQ_DMA5
),
289 static u64 sa11x0dma_dma_mask
= DMA_BIT_MASK(32);
291 static struct platform_device sa11x0dma_device
= {
292 .name
= "sa11x0-dma",
295 .dma_mask
= &sa11x0dma_dma_mask
,
296 .coherent_dma_mask
= 0xffffffff,
298 .num_resources
= ARRAY_SIZE(sa11x0dma_resources
),
299 .resource
= sa11x0dma_resources
,
302 static struct platform_device
*sa11x0_devices
[] __initdata
= {
307 &sa11x0pcmcia_device
,
312 static int __init
sa1100_init(void)
314 pm_power_off
= sa1100_power_off
;
315 return platform_add_devices(sa11x0_devices
, ARRAY_SIZE(sa11x0_devices
));
318 arch_initcall(sa1100_init
);
320 void __init
sa11x0_init_late(void)
326 * Common I/O mapping:
328 * Typically, static virtual address mappings are as follow:
330 * 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
331 * 0xf4000000-0xf4ffffff: SA-1111
332 * 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
333 * 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
334 * 0xffff0000-0xffff0fff: SA1100 exception vectors
335 * 0xffff2000-0xffff2fff: Minicache copy_user_page area
337 * Below 0xe8000000 is reserved for vm allocation.
339 * The machine specific code must provide the extra mapping beside the
340 * default mapping provided here.
343 static struct map_desc standard_io_desc
[] __initdata
= {
345 .virtual = 0xf8000000,
346 .pfn
= __phys_to_pfn(0x80000000),
347 .length
= 0x00100000,
350 .virtual = 0xfa000000,
351 .pfn
= __phys_to_pfn(0x90000000),
352 .length
= 0x00100000,
355 .virtual = 0xfc000000,
356 .pfn
= __phys_to_pfn(0xa0000000),
357 .length
= 0x00100000,
360 .virtual = 0xfe000000,
361 .pfn
= __phys_to_pfn(0xb0000000),
362 .length
= 0x00200000,
367 void __init
sa1100_map_io(void)
369 iotable_init(standard_io_desc
, ARRAY_SIZE(standard_io_desc
));
373 * Disable the memory bus request/grant signals on the SA1110 to
374 * ensure that we don't receive spurious memory requests. We set
375 * the MBGNT signal false to ensure the SA1111 doesn't own the
378 void sa1110_mb_disable(void)
382 local_irq_save(flags
);
386 GPDR
= (GPDR
& ~GPIO_MBREQ
) | GPIO_MBGNT
;
388 GAFR
&= ~(GPIO_MBGNT
| GPIO_MBREQ
);
390 local_irq_restore(flags
);
394 * If the system is going to use the SA-1111 DMA engines, set up
395 * the memory bus request/grant pins.
397 void sa1110_mb_enable(void)
401 local_irq_save(flags
);
405 GPDR
= (GPDR
& ~GPIO_MBREQ
) | GPIO_MBGNT
;
407 GAFR
|= (GPIO_MBGNT
| GPIO_MBREQ
);
410 local_irq_restore(flags
);