1 /***************************************************************************
3 * Copyright (C) 2007-2010 SMSC
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 *****************************************************************************/
20 #include <linux/module.h>
21 #include <linux/kmod.h>
22 #include <linux/netdevice.h>
23 #include <linux/etherdevice.h>
24 #include <linux/ethtool.h>
25 #include <linux/mii.h>
26 #include <linux/usb.h>
27 #include <linux/bitrev.h>
28 #include <linux/crc16.h>
29 #include <linux/crc32.h>
30 #include <linux/usb/usbnet.h>
31 #include <linux/slab.h>
34 #define SMSC_CHIPNAME "smsc75xx"
35 #define SMSC_DRIVER_VERSION "1.0.0"
36 #define HS_USB_PKT_SIZE (512)
37 #define FS_USB_PKT_SIZE (64)
38 #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
39 #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
40 #define DEFAULT_BULK_IN_DELAY (0x00002000)
41 #define MAX_SINGLE_PACKET_SIZE (9000)
42 #define LAN75XX_EEPROM_MAGIC (0x7500)
43 #define EEPROM_MAC_OFFSET (0x01)
44 #define DEFAULT_TX_CSUM_ENABLE (true)
45 #define DEFAULT_RX_CSUM_ENABLE (true)
46 #define SMSC75XX_INTERNAL_PHY_ID (1)
47 #define SMSC75XX_TX_OVERHEAD (8)
48 #define MAX_RX_FIFO_SIZE (20 * 1024)
49 #define MAX_TX_FIFO_SIZE (12 * 1024)
50 #define USB_VENDOR_ID_SMSC (0x0424)
51 #define USB_PRODUCT_ID_LAN7500 (0x7500)
52 #define USB_PRODUCT_ID_LAN7505 (0x7505)
54 #define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
55 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
57 #define SUSPEND_SUSPEND0 (0x01)
58 #define SUSPEND_SUSPEND1 (0x02)
59 #define SUSPEND_SUSPEND2 (0x04)
60 #define SUSPEND_SUSPEND3 (0x08)
61 #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
62 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
64 struct smsc75xx_priv
{
68 u32 multicast_hash_table
[DP_SEL_VHF_HASH_LEN
];
69 struct mutex dataport_mutex
;
70 spinlock_t rfe_ctl_lock
;
71 struct work_struct set_multicast
;
76 struct usb_ctrlrequest req
;
80 static bool turbo_mode
= true;
81 module_param(turbo_mode
, bool, 0644);
82 MODULE_PARM_DESC(turbo_mode
, "Enable multiple frames per Rx transaction");
84 static int __must_check
__smsc75xx_read_reg(struct usbnet
*dev
, u32 index
,
89 int (*fn
)(struct usbnet
*, u8
, u8
, u16
, u16
, void *, u16
);
96 fn
= usbnet_read_cmd_nopm
;
98 ret
= fn(dev
, USB_VENDOR_REQUEST_READ_REGISTER
, USB_DIR_IN
99 | USB_TYPE_VENDOR
| USB_RECIP_DEVICE
,
101 if (unlikely(ret
< 0))
102 netdev_warn(dev
->net
, "Failed to read reg index 0x%08x: %d\n",
111 static int __must_check
__smsc75xx_write_reg(struct usbnet
*dev
, u32 index
,
116 int (*fn
)(struct usbnet
*, u8
, u8
, u16
, u16
, const void *, u16
);
121 fn
= usbnet_write_cmd
;
123 fn
= usbnet_write_cmd_nopm
;
128 ret
= fn(dev
, USB_VENDOR_REQUEST_WRITE_REGISTER
, USB_DIR_OUT
129 | USB_TYPE_VENDOR
| USB_RECIP_DEVICE
,
131 if (unlikely(ret
< 0))
132 netdev_warn(dev
->net
, "Failed to write reg index 0x%08x: %d\n",
138 static int __must_check
smsc75xx_read_reg_nopm(struct usbnet
*dev
, u32 index
,
141 return __smsc75xx_read_reg(dev
, index
, data
, 1);
144 static int __must_check
smsc75xx_write_reg_nopm(struct usbnet
*dev
, u32 index
,
147 return __smsc75xx_write_reg(dev
, index
, data
, 1);
150 static int __must_check
smsc75xx_read_reg(struct usbnet
*dev
, u32 index
,
153 return __smsc75xx_read_reg(dev
, index
, data
, 0);
156 static int __must_check
smsc75xx_write_reg(struct usbnet
*dev
, u32 index
,
159 return __smsc75xx_write_reg(dev
, index
, data
, 0);
162 /* Loop until the read is completed with timeout
163 * called with phy_mutex held */
164 static __must_check
int __smsc75xx_phy_wait_not_busy(struct usbnet
*dev
,
167 unsigned long start_time
= jiffies
;
172 ret
= __smsc75xx_read_reg(dev
, MII_ACCESS
, &val
, in_pm
);
174 netdev_warn(dev
->net
, "Error reading MII_ACCESS\n");
178 if (!(val
& MII_ACCESS_BUSY
))
180 } while (!time_after(jiffies
, start_time
+ HZ
));
185 static int __smsc75xx_mdio_read(struct net_device
*netdev
, int phy_id
, int idx
,
188 struct usbnet
*dev
= netdev_priv(netdev
);
192 mutex_lock(&dev
->phy_mutex
);
194 /* confirm MII not busy */
195 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
197 netdev_warn(dev
->net
, "MII is busy in smsc75xx_mdio_read\n");
201 /* set the address, index & direction (read from PHY) */
202 phy_id
&= dev
->mii
.phy_id_mask
;
203 idx
&= dev
->mii
.reg_num_mask
;
204 addr
= ((phy_id
<< MII_ACCESS_PHY_ADDR_SHIFT
) & MII_ACCESS_PHY_ADDR
)
205 | ((idx
<< MII_ACCESS_REG_ADDR_SHIFT
) & MII_ACCESS_REG_ADDR
)
206 | MII_ACCESS_READ
| MII_ACCESS_BUSY
;
207 ret
= __smsc75xx_write_reg(dev
, MII_ACCESS
, addr
, in_pm
);
209 netdev_warn(dev
->net
, "Error writing MII_ACCESS\n");
213 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
215 netdev_warn(dev
->net
, "Timed out reading MII reg %02X\n", idx
);
219 ret
= __smsc75xx_read_reg(dev
, MII_DATA
, &val
, in_pm
);
221 netdev_warn(dev
->net
, "Error reading MII_DATA\n");
225 ret
= (u16
)(val
& 0xFFFF);
228 mutex_unlock(&dev
->phy_mutex
);
232 static void __smsc75xx_mdio_write(struct net_device
*netdev
, int phy_id
,
233 int idx
, int regval
, int in_pm
)
235 struct usbnet
*dev
= netdev_priv(netdev
);
239 mutex_lock(&dev
->phy_mutex
);
241 /* confirm MII not busy */
242 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
244 netdev_warn(dev
->net
, "MII is busy in smsc75xx_mdio_write\n");
249 ret
= __smsc75xx_write_reg(dev
, MII_DATA
, val
, in_pm
);
251 netdev_warn(dev
->net
, "Error writing MII_DATA\n");
255 /* set the address, index & direction (write to PHY) */
256 phy_id
&= dev
->mii
.phy_id_mask
;
257 idx
&= dev
->mii
.reg_num_mask
;
258 addr
= ((phy_id
<< MII_ACCESS_PHY_ADDR_SHIFT
) & MII_ACCESS_PHY_ADDR
)
259 | ((idx
<< MII_ACCESS_REG_ADDR_SHIFT
) & MII_ACCESS_REG_ADDR
)
260 | MII_ACCESS_WRITE
| MII_ACCESS_BUSY
;
261 ret
= __smsc75xx_write_reg(dev
, MII_ACCESS
, addr
, in_pm
);
263 netdev_warn(dev
->net
, "Error writing MII_ACCESS\n");
267 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
269 netdev_warn(dev
->net
, "Timed out writing MII reg %02X\n", idx
);
274 mutex_unlock(&dev
->phy_mutex
);
277 static int smsc75xx_mdio_read_nopm(struct net_device
*netdev
, int phy_id
,
280 return __smsc75xx_mdio_read(netdev
, phy_id
, idx
, 1);
283 static void smsc75xx_mdio_write_nopm(struct net_device
*netdev
, int phy_id
,
286 __smsc75xx_mdio_write(netdev
, phy_id
, idx
, regval
, 1);
289 static int smsc75xx_mdio_read(struct net_device
*netdev
, int phy_id
, int idx
)
291 return __smsc75xx_mdio_read(netdev
, phy_id
, idx
, 0);
294 static void smsc75xx_mdio_write(struct net_device
*netdev
, int phy_id
, int idx
,
297 __smsc75xx_mdio_write(netdev
, phy_id
, idx
, regval
, 0);
300 static int smsc75xx_wait_eeprom(struct usbnet
*dev
)
302 unsigned long start_time
= jiffies
;
307 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &val
);
309 netdev_warn(dev
->net
, "Error reading E2P_CMD\n");
313 if (!(val
& E2P_CMD_BUSY
) || (val
& E2P_CMD_TIMEOUT
))
316 } while (!time_after(jiffies
, start_time
+ HZ
));
318 if (val
& (E2P_CMD_TIMEOUT
| E2P_CMD_BUSY
)) {
319 netdev_warn(dev
->net
, "EEPROM read operation timeout\n");
326 static int smsc75xx_eeprom_confirm_not_busy(struct usbnet
*dev
)
328 unsigned long start_time
= jiffies
;
333 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &val
);
335 netdev_warn(dev
->net
, "Error reading E2P_CMD\n");
339 if (!(val
& E2P_CMD_BUSY
))
343 } while (!time_after(jiffies
, start_time
+ HZ
));
345 netdev_warn(dev
->net
, "EEPROM is busy\n");
349 static int smsc75xx_read_eeprom(struct usbnet
*dev
, u32 offset
, u32 length
,
358 ret
= smsc75xx_eeprom_confirm_not_busy(dev
);
362 for (i
= 0; i
< length
; i
++) {
363 val
= E2P_CMD_BUSY
| E2P_CMD_READ
| (offset
& E2P_CMD_ADDR
);
364 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
366 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
370 ret
= smsc75xx_wait_eeprom(dev
);
374 ret
= smsc75xx_read_reg(dev
, E2P_DATA
, &val
);
376 netdev_warn(dev
->net
, "Error reading E2P_DATA\n");
380 data
[i
] = val
& 0xFF;
387 static int smsc75xx_write_eeprom(struct usbnet
*dev
, u32 offset
, u32 length
,
396 ret
= smsc75xx_eeprom_confirm_not_busy(dev
);
400 /* Issue write/erase enable command */
401 val
= E2P_CMD_BUSY
| E2P_CMD_EWEN
;
402 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
404 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
408 ret
= smsc75xx_wait_eeprom(dev
);
412 for (i
= 0; i
< length
; i
++) {
414 /* Fill data register */
416 ret
= smsc75xx_write_reg(dev
, E2P_DATA
, val
);
418 netdev_warn(dev
->net
, "Error writing E2P_DATA\n");
422 /* Send "write" command */
423 val
= E2P_CMD_BUSY
| E2P_CMD_WRITE
| (offset
& E2P_CMD_ADDR
);
424 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
426 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
430 ret
= smsc75xx_wait_eeprom(dev
);
440 static int smsc75xx_dataport_wait_not_busy(struct usbnet
*dev
)
444 for (i
= 0; i
< 100; i
++) {
446 ret
= smsc75xx_read_reg(dev
, DP_SEL
, &dp_sel
);
448 netdev_warn(dev
->net
, "Error reading DP_SEL\n");
452 if (dp_sel
& DP_SEL_DPRDY
)
458 netdev_warn(dev
->net
, "smsc75xx_dataport_wait_not_busy timed out\n");
463 static int smsc75xx_dataport_write(struct usbnet
*dev
, u32 ram_select
, u32 addr
,
464 u32 length
, u32
*buf
)
466 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
470 mutex_lock(&pdata
->dataport_mutex
);
472 ret
= smsc75xx_dataport_wait_not_busy(dev
);
474 netdev_warn(dev
->net
, "smsc75xx_dataport_write busy on entry\n");
478 ret
= smsc75xx_read_reg(dev
, DP_SEL
, &dp_sel
);
480 netdev_warn(dev
->net
, "Error reading DP_SEL\n");
484 dp_sel
&= ~DP_SEL_RSEL
;
485 dp_sel
|= ram_select
;
486 ret
= smsc75xx_write_reg(dev
, DP_SEL
, dp_sel
);
488 netdev_warn(dev
->net
, "Error writing DP_SEL\n");
492 for (i
= 0; i
< length
; i
++) {
493 ret
= smsc75xx_write_reg(dev
, DP_ADDR
, addr
+ i
);
495 netdev_warn(dev
->net
, "Error writing DP_ADDR\n");
499 ret
= smsc75xx_write_reg(dev
, DP_DATA
, buf
[i
]);
501 netdev_warn(dev
->net
, "Error writing DP_DATA\n");
505 ret
= smsc75xx_write_reg(dev
, DP_CMD
, DP_CMD_WRITE
);
507 netdev_warn(dev
->net
, "Error writing DP_CMD\n");
511 ret
= smsc75xx_dataport_wait_not_busy(dev
);
513 netdev_warn(dev
->net
, "smsc75xx_dataport_write timeout\n");
519 mutex_unlock(&pdata
->dataport_mutex
);
523 /* returns hash bit number for given MAC address */
524 static u32
smsc75xx_hash(char addr
[ETH_ALEN
])
526 return (ether_crc(ETH_ALEN
, addr
) >> 23) & 0x1ff;
529 static void smsc75xx_deferred_multicast_write(struct work_struct
*param
)
531 struct smsc75xx_priv
*pdata
=
532 container_of(param
, struct smsc75xx_priv
, set_multicast
);
533 struct usbnet
*dev
= pdata
->dev
;
536 netif_dbg(dev
, drv
, dev
->net
, "deferred multicast write 0x%08x\n",
539 smsc75xx_dataport_write(dev
, DP_SEL_VHF
, DP_SEL_VHF_VLAN_LEN
,
540 DP_SEL_VHF_HASH_LEN
, pdata
->multicast_hash_table
);
542 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
544 netdev_warn(dev
->net
, "Error writing RFE_CRL\n");
547 static void smsc75xx_set_multicast(struct net_device
*netdev
)
549 struct usbnet
*dev
= netdev_priv(netdev
);
550 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
554 spin_lock_irqsave(&pdata
->rfe_ctl_lock
, flags
);
557 ~(RFE_CTL_AU
| RFE_CTL_AM
| RFE_CTL_DPF
| RFE_CTL_MHF
);
558 pdata
->rfe_ctl
|= RFE_CTL_AB
;
560 for (i
= 0; i
< DP_SEL_VHF_HASH_LEN
; i
++)
561 pdata
->multicast_hash_table
[i
] = 0;
563 if (dev
->net
->flags
& IFF_PROMISC
) {
564 netif_dbg(dev
, drv
, dev
->net
, "promiscuous mode enabled\n");
565 pdata
->rfe_ctl
|= RFE_CTL_AM
| RFE_CTL_AU
;
566 } else if (dev
->net
->flags
& IFF_ALLMULTI
) {
567 netif_dbg(dev
, drv
, dev
->net
, "receive all multicast enabled\n");
568 pdata
->rfe_ctl
|= RFE_CTL_AM
| RFE_CTL_DPF
;
569 } else if (!netdev_mc_empty(dev
->net
)) {
570 struct netdev_hw_addr
*ha
;
572 netif_dbg(dev
, drv
, dev
->net
, "receive multicast hash filter\n");
574 pdata
->rfe_ctl
|= RFE_CTL_MHF
| RFE_CTL_DPF
;
576 netdev_for_each_mc_addr(ha
, netdev
) {
577 u32 bitnum
= smsc75xx_hash(ha
->addr
);
578 pdata
->multicast_hash_table
[bitnum
/ 32] |=
579 (1 << (bitnum
% 32));
582 netif_dbg(dev
, drv
, dev
->net
, "receive own packets only\n");
583 pdata
->rfe_ctl
|= RFE_CTL_DPF
;
586 spin_unlock_irqrestore(&pdata
->rfe_ctl_lock
, flags
);
588 /* defer register writes to a sleepable context */
589 schedule_work(&pdata
->set_multicast
);
592 static int smsc75xx_update_flowcontrol(struct usbnet
*dev
, u8 duplex
,
593 u16 lcladv
, u16 rmtadv
)
595 u32 flow
= 0, fct_flow
= 0;
598 if (duplex
== DUPLEX_FULL
) {
599 u8 cap
= mii_resolve_flowctrl_fdx(lcladv
, rmtadv
);
601 if (cap
& FLOW_CTRL_TX
) {
602 flow
= (FLOW_TX_FCEN
| 0xFFFF);
603 /* set fct_flow thresholds to 20% and 80% */
604 fct_flow
= (8 << 8) | 32;
607 if (cap
& FLOW_CTRL_RX
)
608 flow
|= FLOW_RX_FCEN
;
610 netif_dbg(dev
, link
, dev
->net
, "rx pause %s, tx pause %s\n",
611 (cap
& FLOW_CTRL_RX
? "enabled" : "disabled"),
612 (cap
& FLOW_CTRL_TX
? "enabled" : "disabled"));
614 netif_dbg(dev
, link
, dev
->net
, "half duplex\n");
617 ret
= smsc75xx_write_reg(dev
, FLOW
, flow
);
619 netdev_warn(dev
->net
, "Error writing FLOW\n");
623 ret
= smsc75xx_write_reg(dev
, FCT_FLOW
, fct_flow
);
625 netdev_warn(dev
->net
, "Error writing FCT_FLOW\n");
632 static int smsc75xx_link_reset(struct usbnet
*dev
)
634 struct mii_if_info
*mii
= &dev
->mii
;
635 struct ethtool_cmd ecmd
= { .cmd
= ETHTOOL_GSET
};
639 /* write to clear phy interrupt status */
640 smsc75xx_mdio_write(dev
->net
, mii
->phy_id
, PHY_INT_SRC
,
641 PHY_INT_SRC_CLEAR_ALL
);
643 ret
= smsc75xx_write_reg(dev
, INT_STS
, INT_STS_CLEAR_ALL
);
645 netdev_warn(dev
->net
, "Error writing INT_STS\n");
649 mii_check_media(mii
, 1, 1);
650 mii_ethtool_gset(&dev
->mii
, &ecmd
);
651 lcladv
= smsc75xx_mdio_read(dev
->net
, mii
->phy_id
, MII_ADVERTISE
);
652 rmtadv
= smsc75xx_mdio_read(dev
->net
, mii
->phy_id
, MII_LPA
);
654 netif_dbg(dev
, link
, dev
->net
, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
655 ethtool_cmd_speed(&ecmd
), ecmd
.duplex
, lcladv
, rmtadv
);
657 return smsc75xx_update_flowcontrol(dev
, ecmd
.duplex
, lcladv
, rmtadv
);
660 static void smsc75xx_status(struct usbnet
*dev
, struct urb
*urb
)
664 if (urb
->actual_length
!= 4) {
665 netdev_warn(dev
->net
, "unexpected urb length %d\n",
670 memcpy(&intdata
, urb
->transfer_buffer
, 4);
671 le32_to_cpus(&intdata
);
673 netif_dbg(dev
, link
, dev
->net
, "intdata: 0x%08X\n", intdata
);
675 if (intdata
& INT_ENP_PHY_INT
)
676 usbnet_defer_kevent(dev
, EVENT_LINK_RESET
);
678 netdev_warn(dev
->net
, "unexpected interrupt, intdata=0x%08X\n",
682 static int smsc75xx_ethtool_get_eeprom_len(struct net_device
*net
)
684 return MAX_EEPROM_SIZE
;
687 static int smsc75xx_ethtool_get_eeprom(struct net_device
*netdev
,
688 struct ethtool_eeprom
*ee
, u8
*data
)
690 struct usbnet
*dev
= netdev_priv(netdev
);
692 ee
->magic
= LAN75XX_EEPROM_MAGIC
;
694 return smsc75xx_read_eeprom(dev
, ee
->offset
, ee
->len
, data
);
697 static int smsc75xx_ethtool_set_eeprom(struct net_device
*netdev
,
698 struct ethtool_eeprom
*ee
, u8
*data
)
700 struct usbnet
*dev
= netdev_priv(netdev
);
702 if (ee
->magic
!= LAN75XX_EEPROM_MAGIC
) {
703 netdev_warn(dev
->net
, "EEPROM: magic value mismatch: 0x%x\n",
708 return smsc75xx_write_eeprom(dev
, ee
->offset
, ee
->len
, data
);
711 static void smsc75xx_ethtool_get_wol(struct net_device
*net
,
712 struct ethtool_wolinfo
*wolinfo
)
714 struct usbnet
*dev
= netdev_priv(net
);
715 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
717 wolinfo
->supported
= SUPPORTED_WAKE
;
718 wolinfo
->wolopts
= pdata
->wolopts
;
721 static int smsc75xx_ethtool_set_wol(struct net_device
*net
,
722 struct ethtool_wolinfo
*wolinfo
)
724 struct usbnet
*dev
= netdev_priv(net
);
725 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
728 pdata
->wolopts
= wolinfo
->wolopts
& SUPPORTED_WAKE
;
730 ret
= device_set_wakeup_enable(&dev
->udev
->dev
, pdata
->wolopts
);
732 netdev_warn(dev
->net
, "device_set_wakeup_enable error %d\n", ret
);
737 static const struct ethtool_ops smsc75xx_ethtool_ops
= {
738 .get_link
= usbnet_get_link
,
739 .nway_reset
= usbnet_nway_reset
,
740 .get_drvinfo
= usbnet_get_drvinfo
,
741 .get_msglevel
= usbnet_get_msglevel
,
742 .set_msglevel
= usbnet_set_msglevel
,
743 .get_settings
= usbnet_get_settings
,
744 .set_settings
= usbnet_set_settings
,
745 .get_eeprom_len
= smsc75xx_ethtool_get_eeprom_len
,
746 .get_eeprom
= smsc75xx_ethtool_get_eeprom
,
747 .set_eeprom
= smsc75xx_ethtool_set_eeprom
,
748 .get_wol
= smsc75xx_ethtool_get_wol
,
749 .set_wol
= smsc75xx_ethtool_set_wol
,
752 static int smsc75xx_ioctl(struct net_device
*netdev
, struct ifreq
*rq
, int cmd
)
754 struct usbnet
*dev
= netdev_priv(netdev
);
756 if (!netif_running(netdev
))
759 return generic_mii_ioctl(&dev
->mii
, if_mii(rq
), cmd
, NULL
);
762 static void smsc75xx_init_mac_address(struct usbnet
*dev
)
764 /* try reading mac address from EEPROM */
765 if (smsc75xx_read_eeprom(dev
, EEPROM_MAC_OFFSET
, ETH_ALEN
,
766 dev
->net
->dev_addr
) == 0) {
767 if (is_valid_ether_addr(dev
->net
->dev_addr
)) {
768 /* eeprom values are valid so use them */
769 netif_dbg(dev
, ifup
, dev
->net
,
770 "MAC address read from EEPROM\n");
775 /* no eeprom, or eeprom values are invalid. generate random MAC */
776 eth_hw_addr_random(dev
->net
);
777 netif_dbg(dev
, ifup
, dev
->net
, "MAC address set to eth_random_addr\n");
780 static int smsc75xx_set_mac_address(struct usbnet
*dev
)
782 u32 addr_lo
= dev
->net
->dev_addr
[0] | dev
->net
->dev_addr
[1] << 8 |
783 dev
->net
->dev_addr
[2] << 16 | dev
->net
->dev_addr
[3] << 24;
784 u32 addr_hi
= dev
->net
->dev_addr
[4] | dev
->net
->dev_addr
[5] << 8;
786 int ret
= smsc75xx_write_reg(dev
, RX_ADDRH
, addr_hi
);
788 netdev_warn(dev
->net
, "Failed to write RX_ADDRH: %d\n", ret
);
792 ret
= smsc75xx_write_reg(dev
, RX_ADDRL
, addr_lo
);
794 netdev_warn(dev
->net
, "Failed to write RX_ADDRL: %d\n", ret
);
798 addr_hi
|= ADDR_FILTX_FB_VALID
;
799 ret
= smsc75xx_write_reg(dev
, ADDR_FILTX
, addr_hi
);
801 netdev_warn(dev
->net
, "Failed to write ADDR_FILTX: %d\n", ret
);
805 ret
= smsc75xx_write_reg(dev
, ADDR_FILTX
+ 4, addr_lo
);
807 netdev_warn(dev
->net
, "Failed to write ADDR_FILTX+4: %d\n", ret
);
812 static int smsc75xx_phy_initialize(struct usbnet
*dev
)
814 int bmcr
, ret
, timeout
= 0;
816 /* Initialize MII structure */
817 dev
->mii
.dev
= dev
->net
;
818 dev
->mii
.mdio_read
= smsc75xx_mdio_read
;
819 dev
->mii
.mdio_write
= smsc75xx_mdio_write
;
820 dev
->mii
.phy_id_mask
= 0x1f;
821 dev
->mii
.reg_num_mask
= 0x1f;
822 dev
->mii
.supports_gmii
= 1;
823 dev
->mii
.phy_id
= SMSC75XX_INTERNAL_PHY_ID
;
825 /* reset phy and wait for reset to complete */
826 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_BMCR
, BMCR_RESET
);
830 bmcr
= smsc75xx_mdio_read(dev
->net
, dev
->mii
.phy_id
, MII_BMCR
);
832 netdev_warn(dev
->net
, "Error reading MII_BMCR\n");
836 } while ((bmcr
& BMCR_RESET
) && (timeout
< 100));
838 if (timeout
>= 100) {
839 netdev_warn(dev
->net
, "timeout on PHY Reset\n");
843 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_ADVERTISE
,
844 ADVERTISE_ALL
| ADVERTISE_CSMA
| ADVERTISE_PAUSE_CAP
|
845 ADVERTISE_PAUSE_ASYM
);
846 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_CTRL1000
,
849 /* read and write to clear phy interrupt status */
850 ret
= smsc75xx_mdio_read(dev
->net
, dev
->mii
.phy_id
, PHY_INT_SRC
);
852 netdev_warn(dev
->net
, "Error reading PHY_INT_SRC\n");
856 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, PHY_INT_SRC
, 0xffff);
858 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, PHY_INT_MASK
,
859 PHY_INT_MASK_DEFAULT
);
860 mii_nway_restart(&dev
->mii
);
862 netif_dbg(dev
, ifup
, dev
->net
, "phy initialised successfully\n");
866 static int smsc75xx_set_rx_max_frame_length(struct usbnet
*dev
, int size
)
872 ret
= smsc75xx_read_reg(dev
, MAC_RX
, &buf
);
874 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
878 rxenabled
= ((buf
& MAC_RX_RXEN
) != 0);
882 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
884 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
889 /* add 4 to size for FCS */
890 buf
&= ~MAC_RX_MAX_SIZE
;
891 buf
|= (((size
+ 4) << MAC_RX_MAX_SIZE_SHIFT
) & MAC_RX_MAX_SIZE
);
893 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
895 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
901 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
903 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
911 static int smsc75xx_change_mtu(struct net_device
*netdev
, int new_mtu
)
913 struct usbnet
*dev
= netdev_priv(netdev
);
916 if (new_mtu
> MAX_SINGLE_PACKET_SIZE
)
919 ret
= smsc75xx_set_rx_max_frame_length(dev
, new_mtu
+ ETH_HLEN
);
921 netdev_warn(dev
->net
, "Failed to set mac rx frame length\n");
925 return usbnet_change_mtu(netdev
, new_mtu
);
928 /* Enable or disable Rx checksum offload engine */
929 static int smsc75xx_set_features(struct net_device
*netdev
,
930 netdev_features_t features
)
932 struct usbnet
*dev
= netdev_priv(netdev
);
933 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
937 spin_lock_irqsave(&pdata
->rfe_ctl_lock
, flags
);
939 if (features
& NETIF_F_RXCSUM
)
940 pdata
->rfe_ctl
|= RFE_CTL_TCPUDP_CKM
| RFE_CTL_IP_CKM
;
942 pdata
->rfe_ctl
&= ~(RFE_CTL_TCPUDP_CKM
| RFE_CTL_IP_CKM
);
944 spin_unlock_irqrestore(&pdata
->rfe_ctl_lock
, flags
);
945 /* it's racing here! */
947 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
949 netdev_warn(dev
->net
, "Error writing RFE_CTL\n");
954 static int smsc75xx_wait_ready(struct usbnet
*dev
, int in_pm
)
962 ret
= __smsc75xx_read_reg(dev
, PMT_CTL
, &buf
, in_pm
);
965 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
969 if (buf
& PMT_CTL_DEV_RDY
)
974 } while (timeout
< 100);
976 netdev_warn(dev
->net
, "timeout waiting for device ready\n");
980 static int smsc75xx_reset(struct usbnet
*dev
)
982 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
984 int ret
= 0, timeout
;
986 netif_dbg(dev
, ifup
, dev
->net
, "entering smsc75xx_reset\n");
988 ret
= smsc75xx_wait_ready(dev
, 0);
990 netdev_warn(dev
->net
, "device not ready in smsc75xx_reset\n");
994 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
996 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1002 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1004 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1011 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1013 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1017 } while ((buf
& HW_CFG_LRST
) && (timeout
< 100));
1019 if (timeout
>= 100) {
1020 netdev_warn(dev
->net
, "timeout on completion of Lite Reset\n");
1024 netif_dbg(dev
, ifup
, dev
->net
, "Lite reset complete, resetting PHY\n");
1026 ret
= smsc75xx_read_reg(dev
, PMT_CTL
, &buf
);
1028 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
1032 buf
|= PMT_CTL_PHY_RST
;
1034 ret
= smsc75xx_write_reg(dev
, PMT_CTL
, buf
);
1036 netdev_warn(dev
->net
, "Failed to write PMT_CTL: %d\n", ret
);
1043 ret
= smsc75xx_read_reg(dev
, PMT_CTL
, &buf
);
1045 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
1049 } while ((buf
& PMT_CTL_PHY_RST
) && (timeout
< 100));
1051 if (timeout
>= 100) {
1052 netdev_warn(dev
->net
, "timeout waiting for PHY Reset\n");
1056 netif_dbg(dev
, ifup
, dev
->net
, "PHY reset complete\n");
1058 ret
= smsc75xx_set_mac_address(dev
);
1060 netdev_warn(dev
->net
, "Failed to set mac address\n");
1064 netif_dbg(dev
, ifup
, dev
->net
, "MAC Address: %pM\n",
1065 dev
->net
->dev_addr
);
1067 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1069 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1073 netif_dbg(dev
, ifup
, dev
->net
, "Read Value from HW_CFG : 0x%08x\n",
1078 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1080 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1084 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1086 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1090 netif_dbg(dev
, ifup
, dev
->net
, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
1095 dev
->rx_urb_size
= MAX_SINGLE_PACKET_SIZE
;
1096 } else if (dev
->udev
->speed
== USB_SPEED_HIGH
) {
1097 buf
= DEFAULT_HS_BURST_CAP_SIZE
/ HS_USB_PKT_SIZE
;
1098 dev
->rx_urb_size
= DEFAULT_HS_BURST_CAP_SIZE
;
1100 buf
= DEFAULT_FS_BURST_CAP_SIZE
/ FS_USB_PKT_SIZE
;
1101 dev
->rx_urb_size
= DEFAULT_FS_BURST_CAP_SIZE
;
1104 netif_dbg(dev
, ifup
, dev
->net
, "rx_urb_size=%ld\n",
1105 (ulong
)dev
->rx_urb_size
);
1107 ret
= smsc75xx_write_reg(dev
, BURST_CAP
, buf
);
1109 netdev_warn(dev
->net
, "Failed to write BURST_CAP: %d\n", ret
);
1113 ret
= smsc75xx_read_reg(dev
, BURST_CAP
, &buf
);
1115 netdev_warn(dev
->net
, "Failed to read BURST_CAP: %d\n", ret
);
1119 netif_dbg(dev
, ifup
, dev
->net
,
1120 "Read Value from BURST_CAP after writing: 0x%08x\n", buf
);
1122 ret
= smsc75xx_write_reg(dev
, BULK_IN_DLY
, DEFAULT_BULK_IN_DELAY
);
1124 netdev_warn(dev
->net
, "Failed to write BULK_IN_DLY: %d\n", ret
);
1128 ret
= smsc75xx_read_reg(dev
, BULK_IN_DLY
, &buf
);
1130 netdev_warn(dev
->net
, "Failed to read BULK_IN_DLY: %d\n", ret
);
1134 netif_dbg(dev
, ifup
, dev
->net
,
1135 "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf
);
1138 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1140 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1144 netif_dbg(dev
, ifup
, dev
->net
, "HW_CFG: 0x%08x\n", buf
);
1146 buf
|= (HW_CFG_MEF
| HW_CFG_BCE
);
1148 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1150 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1154 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1156 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1160 netif_dbg(dev
, ifup
, dev
->net
, "HW_CFG: 0x%08x\n", buf
);
1163 /* set FIFO sizes */
1164 buf
= (MAX_RX_FIFO_SIZE
- 512) / 512;
1165 ret
= smsc75xx_write_reg(dev
, FCT_RX_FIFO_END
, buf
);
1167 netdev_warn(dev
->net
, "Failed to write FCT_RX_FIFO_END: %d\n", ret
);
1171 netif_dbg(dev
, ifup
, dev
->net
, "FCT_RX_FIFO_END set to 0x%08x\n", buf
);
1173 buf
= (MAX_TX_FIFO_SIZE
- 512) / 512;
1174 ret
= smsc75xx_write_reg(dev
, FCT_TX_FIFO_END
, buf
);
1176 netdev_warn(dev
->net
, "Failed to write FCT_TX_FIFO_END: %d\n", ret
);
1180 netif_dbg(dev
, ifup
, dev
->net
, "FCT_TX_FIFO_END set to 0x%08x\n", buf
);
1182 ret
= smsc75xx_write_reg(dev
, INT_STS
, INT_STS_CLEAR_ALL
);
1184 netdev_warn(dev
->net
, "Failed to write INT_STS: %d\n", ret
);
1188 ret
= smsc75xx_read_reg(dev
, ID_REV
, &buf
);
1190 netdev_warn(dev
->net
, "Failed to read ID_REV: %d\n", ret
);
1194 netif_dbg(dev
, ifup
, dev
->net
, "ID_REV = 0x%08x\n", buf
);
1196 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &buf
);
1198 netdev_warn(dev
->net
, "Failed to read E2P_CMD: %d\n", ret
);
1202 /* only set default GPIO/LED settings if no EEPROM is detected */
1203 if (!(buf
& E2P_CMD_LOADED
)) {
1204 ret
= smsc75xx_read_reg(dev
, LED_GPIO_CFG
, &buf
);
1206 netdev_warn(dev
->net
, "Failed to read LED_GPIO_CFG: %d\n", ret
);
1210 buf
&= ~(LED_GPIO_CFG_LED2_FUN_SEL
| LED_GPIO_CFG_LED10_FUN_SEL
);
1211 buf
|= LED_GPIO_CFG_LEDGPIO_EN
| LED_GPIO_CFG_LED2_FUN_SEL
;
1213 ret
= smsc75xx_write_reg(dev
, LED_GPIO_CFG
, buf
);
1215 netdev_warn(dev
->net
, "Failed to write LED_GPIO_CFG: %d\n", ret
);
1220 ret
= smsc75xx_write_reg(dev
, FLOW
, 0);
1222 netdev_warn(dev
->net
, "Failed to write FLOW: %d\n", ret
);
1226 ret
= smsc75xx_write_reg(dev
, FCT_FLOW
, 0);
1228 netdev_warn(dev
->net
, "Failed to write FCT_FLOW: %d\n", ret
);
1232 /* Don't need rfe_ctl_lock during initialisation */
1233 ret
= smsc75xx_read_reg(dev
, RFE_CTL
, &pdata
->rfe_ctl
);
1235 netdev_warn(dev
->net
, "Failed to read RFE_CTL: %d\n", ret
);
1239 pdata
->rfe_ctl
|= RFE_CTL_AB
| RFE_CTL_DPF
;
1241 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
1243 netdev_warn(dev
->net
, "Failed to write RFE_CTL: %d\n", ret
);
1247 ret
= smsc75xx_read_reg(dev
, RFE_CTL
, &pdata
->rfe_ctl
);
1249 netdev_warn(dev
->net
, "Failed to read RFE_CTL: %d\n", ret
);
1253 netif_dbg(dev
, ifup
, dev
->net
, "RFE_CTL set to 0x%08x\n",
1256 /* Enable or disable checksum offload engines */
1257 smsc75xx_set_features(dev
->net
, dev
->net
->features
);
1259 smsc75xx_set_multicast(dev
->net
);
1261 ret
= smsc75xx_phy_initialize(dev
);
1263 netdev_warn(dev
->net
, "Failed to initialize PHY: %d\n", ret
);
1267 ret
= smsc75xx_read_reg(dev
, INT_EP_CTL
, &buf
);
1269 netdev_warn(dev
->net
, "Failed to read INT_EP_CTL: %d\n", ret
);
1273 /* enable PHY interrupts */
1274 buf
|= INT_ENP_PHY_INT
;
1276 ret
= smsc75xx_write_reg(dev
, INT_EP_CTL
, buf
);
1278 netdev_warn(dev
->net
, "Failed to write INT_EP_CTL: %d\n", ret
);
1282 /* allow mac to detect speed and duplex from phy */
1283 ret
= smsc75xx_read_reg(dev
, MAC_CR
, &buf
);
1285 netdev_warn(dev
->net
, "Failed to read MAC_CR: %d\n", ret
);
1289 buf
|= (MAC_CR_ADD
| MAC_CR_ASD
);
1290 ret
= smsc75xx_write_reg(dev
, MAC_CR
, buf
);
1292 netdev_warn(dev
->net
, "Failed to write MAC_CR: %d\n", ret
);
1296 ret
= smsc75xx_read_reg(dev
, MAC_TX
, &buf
);
1298 netdev_warn(dev
->net
, "Failed to read MAC_TX: %d\n", ret
);
1304 ret
= smsc75xx_write_reg(dev
, MAC_TX
, buf
);
1306 netdev_warn(dev
->net
, "Failed to write MAC_TX: %d\n", ret
);
1310 netif_dbg(dev
, ifup
, dev
->net
, "MAC_TX set to 0x%08x\n", buf
);
1312 ret
= smsc75xx_read_reg(dev
, FCT_TX_CTL
, &buf
);
1314 netdev_warn(dev
->net
, "Failed to read FCT_TX_CTL: %d\n", ret
);
1318 buf
|= FCT_TX_CTL_EN
;
1320 ret
= smsc75xx_write_reg(dev
, FCT_TX_CTL
, buf
);
1322 netdev_warn(dev
->net
, "Failed to write FCT_TX_CTL: %d\n", ret
);
1326 netif_dbg(dev
, ifup
, dev
->net
, "FCT_TX_CTL set to 0x%08x\n", buf
);
1328 ret
= smsc75xx_set_rx_max_frame_length(dev
, dev
->net
->mtu
+ ETH_HLEN
);
1330 netdev_warn(dev
->net
, "Failed to set max rx frame length\n");
1334 ret
= smsc75xx_read_reg(dev
, MAC_RX
, &buf
);
1336 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
1342 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
1344 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
1348 netif_dbg(dev
, ifup
, dev
->net
, "MAC_RX set to 0x%08x\n", buf
);
1350 ret
= smsc75xx_read_reg(dev
, FCT_RX_CTL
, &buf
);
1352 netdev_warn(dev
->net
, "Failed to read FCT_RX_CTL: %d\n", ret
);
1356 buf
|= FCT_RX_CTL_EN
;
1358 ret
= smsc75xx_write_reg(dev
, FCT_RX_CTL
, buf
);
1360 netdev_warn(dev
->net
, "Failed to write FCT_RX_CTL: %d\n", ret
);
1364 netif_dbg(dev
, ifup
, dev
->net
, "FCT_RX_CTL set to 0x%08x\n", buf
);
1366 netif_dbg(dev
, ifup
, dev
->net
, "smsc75xx_reset, return 0\n");
1370 static const struct net_device_ops smsc75xx_netdev_ops
= {
1371 .ndo_open
= usbnet_open
,
1372 .ndo_stop
= usbnet_stop
,
1373 .ndo_start_xmit
= usbnet_start_xmit
,
1374 .ndo_tx_timeout
= usbnet_tx_timeout
,
1375 .ndo_change_mtu
= smsc75xx_change_mtu
,
1376 .ndo_set_mac_address
= eth_mac_addr
,
1377 .ndo_validate_addr
= eth_validate_addr
,
1378 .ndo_do_ioctl
= smsc75xx_ioctl
,
1379 .ndo_set_rx_mode
= smsc75xx_set_multicast
,
1380 .ndo_set_features
= smsc75xx_set_features
,
1383 static int smsc75xx_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
1385 struct smsc75xx_priv
*pdata
= NULL
;
1388 printk(KERN_INFO SMSC_CHIPNAME
" v" SMSC_DRIVER_VERSION
"\n");
1390 ret
= usbnet_get_endpoints(dev
, intf
);
1392 netdev_warn(dev
->net
, "usbnet_get_endpoints failed: %d\n", ret
);
1396 dev
->data
[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv
),
1399 pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1405 spin_lock_init(&pdata
->rfe_ctl_lock
);
1406 mutex_init(&pdata
->dataport_mutex
);
1408 INIT_WORK(&pdata
->set_multicast
, smsc75xx_deferred_multicast_write
);
1410 if (DEFAULT_TX_CSUM_ENABLE
)
1411 dev
->net
->features
|= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
;
1413 if (DEFAULT_RX_CSUM_ENABLE
)
1414 dev
->net
->features
|= NETIF_F_RXCSUM
;
1416 dev
->net
->hw_features
= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
1419 ret
= smsc75xx_wait_ready(dev
, 0);
1421 netdev_warn(dev
->net
, "device not ready in smsc75xx_bind\n");
1425 smsc75xx_init_mac_address(dev
);
1427 /* Init all registers */
1428 ret
= smsc75xx_reset(dev
);
1430 netdev_warn(dev
->net
, "smsc75xx_reset error %d\n", ret
);
1434 dev
->net
->netdev_ops
= &smsc75xx_netdev_ops
;
1435 dev
->net
->ethtool_ops
= &smsc75xx_ethtool_ops
;
1436 dev
->net
->flags
|= IFF_MULTICAST
;
1437 dev
->net
->hard_header_len
+= SMSC75XX_TX_OVERHEAD
;
1438 dev
->hard_mtu
= dev
->net
->mtu
+ dev
->net
->hard_header_len
;
1442 static void smsc75xx_unbind(struct usbnet
*dev
, struct usb_interface
*intf
)
1444 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1446 netif_dbg(dev
, ifdown
, dev
->net
, "free pdata\n");
1453 static u16
smsc_crc(const u8
*buffer
, size_t len
)
1455 return bitrev16(crc16(0xFFFF, buffer
, len
));
1458 static int smsc75xx_write_wuff(struct usbnet
*dev
, int filter
, u32 wuf_cfg
,
1461 int cfg_base
= WUF_CFGX
+ filter
* 4;
1462 int mask_base
= WUF_MASKX
+ filter
* 16;
1465 ret
= smsc75xx_write_reg(dev
, cfg_base
, wuf_cfg
);
1467 netdev_warn(dev
->net
, "Error writing WUF_CFGX\n");
1471 ret
= smsc75xx_write_reg(dev
, mask_base
, wuf_mask1
);
1473 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1477 ret
= smsc75xx_write_reg(dev
, mask_base
+ 4, 0);
1479 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1483 ret
= smsc75xx_write_reg(dev
, mask_base
+ 8, 0);
1485 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1489 ret
= smsc75xx_write_reg(dev
, mask_base
+ 12, 0);
1491 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1498 static int smsc75xx_enter_suspend0(struct usbnet
*dev
)
1500 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1504 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1506 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1510 val
&= (~(PMT_CTL_SUS_MODE
| PMT_CTL_PHY_RST
));
1511 val
|= PMT_CTL_SUS_MODE_0
| PMT_CTL_WOL_EN
| PMT_CTL_WUPS
;
1513 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1515 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1519 pdata
->suspend_flags
|= SUSPEND_SUSPEND0
;
1524 static int smsc75xx_enter_suspend1(struct usbnet
*dev
)
1526 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1530 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1532 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1536 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1537 val
|= PMT_CTL_SUS_MODE_1
;
1539 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1541 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1545 /* clear wol status, enable energy detection */
1546 val
&= ~PMT_CTL_WUPS
;
1547 val
|= (PMT_CTL_WUPS_ED
| PMT_CTL_ED_EN
);
1549 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1551 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1555 pdata
->suspend_flags
|= SUSPEND_SUSPEND1
;
1560 static int smsc75xx_enter_suspend2(struct usbnet
*dev
)
1562 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1566 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1568 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1572 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1573 val
|= PMT_CTL_SUS_MODE_2
;
1575 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1577 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1581 pdata
->suspend_flags
|= SUSPEND_SUSPEND2
;
1586 static int smsc75xx_enter_suspend3(struct usbnet
*dev
)
1588 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1592 ret
= smsc75xx_read_reg_nopm(dev
, FCT_RX_CTL
, &val
);
1594 netdev_warn(dev
->net
, "Error reading FCT_RX_CTL\n");
1598 if (val
& FCT_RX_CTL_RXUSED
) {
1599 netdev_dbg(dev
->net
, "rx fifo not empty in autosuspend\n");
1603 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1605 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1609 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1610 val
|= PMT_CTL_SUS_MODE_3
| PMT_CTL_RES_CLR_WKP_EN
;
1612 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1614 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1618 /* clear wol status */
1619 val
&= ~PMT_CTL_WUPS
;
1620 val
|= PMT_CTL_WUPS_WOL
;
1622 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1624 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1628 pdata
->suspend_flags
|= SUSPEND_SUSPEND3
;
1633 static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet
*dev
, u16 mask
)
1635 struct mii_if_info
*mii
= &dev
->mii
;
1638 netdev_dbg(dev
->net
, "enabling PHY wakeup interrupts\n");
1641 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, PHY_INT_SRC
);
1643 netdev_warn(dev
->net
, "Error reading PHY_INT_SRC\n");
1647 /* enable interrupt source */
1648 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, PHY_INT_MASK
);
1650 netdev_warn(dev
->net
, "Error reading PHY_INT_MASK\n");
1656 smsc75xx_mdio_write_nopm(dev
->net
, mii
->phy_id
, PHY_INT_MASK
, ret
);
1661 static int smsc75xx_link_ok_nopm(struct usbnet
*dev
)
1663 struct mii_if_info
*mii
= &dev
->mii
;
1666 /* first, a dummy read, needed to latch some MII phys */
1667 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, MII_BMSR
);
1669 netdev_warn(dev
->net
, "Error reading MII_BMSR\n");
1673 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, MII_BMSR
);
1675 netdev_warn(dev
->net
, "Error reading MII_BMSR\n");
1679 return !!(ret
& BMSR_LSTATUS
);
1682 static int smsc75xx_autosuspend(struct usbnet
*dev
, u32 link_up
)
1686 if (!netif_running(dev
->net
)) {
1687 /* interface is ifconfig down so fully power down hw */
1688 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND2\n");
1689 return smsc75xx_enter_suspend2(dev
);
1693 /* link is down so enter EDPD mode */
1694 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND1\n");
1696 /* enable PHY wakeup events for if cable is attached */
1697 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1698 PHY_INT_MASK_ANEG_COMP
);
1700 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1704 netdev_info(dev
->net
, "entering SUSPEND1 mode\n");
1705 return smsc75xx_enter_suspend1(dev
);
1708 /* enable PHY wakeup events so we remote wakeup if cable is pulled */
1709 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1710 PHY_INT_MASK_LINK_DOWN
);
1712 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1716 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND3\n");
1717 return smsc75xx_enter_suspend3(dev
);
1720 static int smsc75xx_suspend(struct usb_interface
*intf
, pm_message_t message
)
1722 struct usbnet
*dev
= usb_get_intfdata(intf
);
1723 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1727 ret
= usbnet_suspend(intf
, message
);
1729 netdev_warn(dev
->net
, "usbnet_suspend error\n");
1733 if (pdata
->suspend_flags
) {
1734 netdev_warn(dev
->net
, "error during last resume\n");
1735 pdata
->suspend_flags
= 0;
1738 /* determine if link is up using only _nopm functions */
1739 link_up
= smsc75xx_link_ok_nopm(dev
);
1741 if (message
.event
== PM_EVENT_AUTO_SUSPEND
) {
1742 ret
= smsc75xx_autosuspend(dev
, link_up
);
1746 /* if we get this far we're not autosuspending */
1747 /* if no wol options set, or if link is down and we're not waking on
1748 * PHY activity, enter lowest power SUSPEND2 mode
1750 if (!(pdata
->wolopts
& SUPPORTED_WAKE
) ||
1751 !(link_up
|| (pdata
->wolopts
& WAKE_PHY
))) {
1752 netdev_info(dev
->net
, "entering SUSPEND2 mode\n");
1754 /* disable energy detect (link up) & wake up events */
1755 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1757 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1761 val
&= ~(WUCSR_MPEN
| WUCSR_WUEN
);
1763 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1765 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1769 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1771 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1775 val
&= ~(PMT_CTL_ED_EN
| PMT_CTL_WOL_EN
);
1777 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1779 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1783 ret
= smsc75xx_enter_suspend2(dev
);
1787 if (pdata
->wolopts
& WAKE_PHY
) {
1788 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1789 (PHY_INT_MASK_ANEG_COMP
| PHY_INT_MASK_LINK_DOWN
));
1791 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1795 /* if link is down then configure EDPD and enter SUSPEND1,
1796 * otherwise enter SUSPEND0 below
1799 struct mii_if_info
*mii
= &dev
->mii
;
1800 netdev_info(dev
->net
, "entering SUSPEND1 mode\n");
1802 /* enable energy detect power-down mode */
1803 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
,
1806 netdev_warn(dev
->net
, "Error reading PHY_MODE_CTRL_STS\n");
1810 ret
|= MODE_CTRL_STS_EDPWRDOWN
;
1812 smsc75xx_mdio_write_nopm(dev
->net
, mii
->phy_id
,
1813 PHY_MODE_CTRL_STS
, ret
);
1815 /* enter SUSPEND1 mode */
1816 ret
= smsc75xx_enter_suspend1(dev
);
1821 if (pdata
->wolopts
& (WAKE_MCAST
| WAKE_ARP
)) {
1824 /* disable all filters */
1825 for (i
= 0; i
< WUF_NUM
; i
++) {
1826 ret
= smsc75xx_write_reg_nopm(dev
, WUF_CFGX
+ i
* 4, 0);
1828 netdev_warn(dev
->net
, "Error writing WUF_CFGX\n");
1833 if (pdata
->wolopts
& WAKE_MCAST
) {
1834 const u8 mcast
[] = {0x01, 0x00, 0x5E};
1835 netdev_info(dev
->net
, "enabling multicast detection\n");
1837 val
= WUF_CFGX_EN
| WUF_CFGX_ATYPE_MULTICAST
1838 | smsc_crc(mcast
, 3);
1839 ret
= smsc75xx_write_wuff(dev
, filter
++, val
, 0x0007);
1841 netdev_warn(dev
->net
, "Error writing wakeup filter\n");
1846 if (pdata
->wolopts
& WAKE_ARP
) {
1847 const u8 arp
[] = {0x08, 0x06};
1848 netdev_info(dev
->net
, "enabling ARP detection\n");
1850 val
= WUF_CFGX_EN
| WUF_CFGX_ATYPE_ALL
| (0x0C << 16)
1852 ret
= smsc75xx_write_wuff(dev
, filter
++, val
, 0x0003);
1854 netdev_warn(dev
->net
, "Error writing wakeup filter\n");
1859 /* clear any pending pattern match packet status */
1860 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1862 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1868 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1870 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1874 netdev_info(dev
->net
, "enabling packet match detection\n");
1875 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1877 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1883 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1885 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1889 netdev_info(dev
->net
, "disabling packet match detection\n");
1890 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1892 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1898 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1900 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1905 /* disable magic, bcast & unicast wakeup sources */
1906 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1908 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1912 val
&= ~(WUCSR_MPEN
| WUCSR_BCST_EN
| WUCSR_PFDA_EN
);
1914 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1916 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1920 if (pdata
->wolopts
& WAKE_PHY
) {
1921 netdev_info(dev
->net
, "enabling PHY wakeup\n");
1923 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1925 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1929 /* clear wol status, enable energy detection */
1930 val
&= ~PMT_CTL_WUPS
;
1931 val
|= (PMT_CTL_WUPS_ED
| PMT_CTL_ED_EN
);
1933 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1935 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1940 if (pdata
->wolopts
& WAKE_MAGIC
) {
1941 netdev_info(dev
->net
, "enabling magic packet wakeup\n");
1942 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1944 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1948 /* clear any pending magic packet status */
1949 val
|= WUCSR_MPR
| WUCSR_MPEN
;
1951 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1953 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1958 if (pdata
->wolopts
& WAKE_BCAST
) {
1959 netdev_info(dev
->net
, "enabling broadcast detection\n");
1960 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1962 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1966 val
|= WUCSR_BCAST_FR
| WUCSR_BCST_EN
;
1968 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1970 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1975 if (pdata
->wolopts
& WAKE_UCAST
) {
1976 netdev_info(dev
->net
, "enabling unicast detection\n");
1977 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1979 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1983 val
|= WUCSR_WUFR
| WUCSR_PFDA_EN
;
1985 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1987 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1992 /* enable receiver to enable frame reception */
1993 ret
= smsc75xx_read_reg_nopm(dev
, MAC_RX
, &val
);
1995 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
2001 ret
= smsc75xx_write_reg_nopm(dev
, MAC_RX
, val
);
2003 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
2007 /* some wol options are enabled, so enter SUSPEND0 */
2008 netdev_info(dev
->net
, "entering SUSPEND0 mode\n");
2009 ret
= smsc75xx_enter_suspend0(dev
);
2013 * TODO: resume() might need to handle the suspend failure
2016 if (ret
&& PMSG_IS_AUTO(message
))
2017 usbnet_resume(intf
);
2021 static int smsc75xx_resume(struct usb_interface
*intf
)
2023 struct usbnet
*dev
= usb_get_intfdata(intf
);
2024 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
2025 u8 suspend_flags
= pdata
->suspend_flags
;
2029 netdev_dbg(dev
->net
, "resume suspend_flags=0x%02x\n", suspend_flags
);
2031 /* do this first to ensure it's cleared even in error case */
2032 pdata
->suspend_flags
= 0;
2034 if (suspend_flags
& SUSPEND_ALLMODES
) {
2035 /* Disable wakeup sources */
2036 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
2038 netdev_warn(dev
->net
, "Error reading WUCSR\n");
2042 val
&= ~(WUCSR_WUEN
| WUCSR_MPEN
| WUCSR_PFDA_EN
2045 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
2047 netdev_warn(dev
->net
, "Error writing WUCSR\n");
2051 /* clear wake-up status */
2052 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
2054 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
2058 val
&= ~PMT_CTL_WOL_EN
;
2059 val
|= PMT_CTL_WUPS
;
2061 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
2063 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
2068 if (suspend_flags
& SUSPEND_SUSPEND2
) {
2069 netdev_info(dev
->net
, "resuming from SUSPEND2\n");
2071 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
2073 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
2077 val
|= PMT_CTL_PHY_PWRUP
;
2079 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
2081 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
2086 ret
= smsc75xx_wait_ready(dev
, 1);
2088 netdev_warn(dev
->net
, "device not ready in smsc75xx_resume\n");
2092 return usbnet_resume(intf
);
2095 static void smsc75xx_rx_csum_offload(struct usbnet
*dev
, struct sk_buff
*skb
,
2096 u32 rx_cmd_a
, u32 rx_cmd_b
)
2098 if (!(dev
->net
->features
& NETIF_F_RXCSUM
) ||
2099 unlikely(rx_cmd_a
& RX_CMD_A_LCSM
)) {
2100 skb
->ip_summed
= CHECKSUM_NONE
;
2102 skb
->csum
= ntohs((u16
)(rx_cmd_b
>> RX_CMD_B_CSUM_SHIFT
));
2103 skb
->ip_summed
= CHECKSUM_COMPLETE
;
2107 static int smsc75xx_rx_fixup(struct usbnet
*dev
, struct sk_buff
*skb
)
2109 while (skb
->len
> 0) {
2110 u32 rx_cmd_a
, rx_cmd_b
, align_count
, size
;
2111 struct sk_buff
*ax_skb
;
2112 unsigned char *packet
;
2114 memcpy(&rx_cmd_a
, skb
->data
, sizeof(rx_cmd_a
));
2115 le32_to_cpus(&rx_cmd_a
);
2118 memcpy(&rx_cmd_b
, skb
->data
, sizeof(rx_cmd_b
));
2119 le32_to_cpus(&rx_cmd_b
);
2120 skb_pull(skb
, 4 + RXW_PADDING
);
2124 /* get the packet length */
2125 size
= (rx_cmd_a
& RX_CMD_A_LEN
) - RXW_PADDING
;
2126 align_count
= (4 - ((size
+ RXW_PADDING
) % 4)) % 4;
2128 if (unlikely(rx_cmd_a
& RX_CMD_A_RED
)) {
2129 netif_dbg(dev
, rx_err
, dev
->net
,
2130 "Error rx_cmd_a=0x%08x\n", rx_cmd_a
);
2131 dev
->net
->stats
.rx_errors
++;
2132 dev
->net
->stats
.rx_dropped
++;
2134 if (rx_cmd_a
& RX_CMD_A_FCS
)
2135 dev
->net
->stats
.rx_crc_errors
++;
2136 else if (rx_cmd_a
& (RX_CMD_A_LONG
| RX_CMD_A_RUNT
))
2137 dev
->net
->stats
.rx_frame_errors
++;
2139 /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
2140 if (unlikely(size
> (MAX_SINGLE_PACKET_SIZE
+ ETH_HLEN
+ 12))) {
2141 netif_dbg(dev
, rx_err
, dev
->net
,
2142 "size err rx_cmd_a=0x%08x\n",
2147 /* last frame in this batch */
2148 if (skb
->len
== size
) {
2149 smsc75xx_rx_csum_offload(dev
, skb
, rx_cmd_a
,
2152 skb_trim(skb
, skb
->len
- 4); /* remove fcs */
2153 skb
->truesize
= size
+ sizeof(struct sk_buff
);
2158 ax_skb
= skb_clone(skb
, GFP_ATOMIC
);
2159 if (unlikely(!ax_skb
)) {
2160 netdev_warn(dev
->net
, "Error allocating skb\n");
2165 ax_skb
->data
= packet
;
2166 skb_set_tail_pointer(ax_skb
, size
);
2168 smsc75xx_rx_csum_offload(dev
, ax_skb
, rx_cmd_a
,
2171 skb_trim(ax_skb
, ax_skb
->len
- 4); /* remove fcs */
2172 ax_skb
->truesize
= size
+ sizeof(struct sk_buff
);
2174 usbnet_skb_return(dev
, ax_skb
);
2177 skb_pull(skb
, size
);
2179 /* padding bytes before the next frame starts */
2181 skb_pull(skb
, align_count
);
2184 if (unlikely(skb
->len
< 0)) {
2185 netdev_warn(dev
->net
, "invalid rx length<0 %d\n", skb
->len
);
2192 static struct sk_buff
*smsc75xx_tx_fixup(struct usbnet
*dev
,
2193 struct sk_buff
*skb
, gfp_t flags
)
2195 u32 tx_cmd_a
, tx_cmd_b
;
2197 if (skb_headroom(skb
) < SMSC75XX_TX_OVERHEAD
) {
2198 struct sk_buff
*skb2
=
2199 skb_copy_expand(skb
, SMSC75XX_TX_OVERHEAD
, 0, flags
);
2200 dev_kfree_skb_any(skb
);
2206 tx_cmd_a
= (u32
)(skb
->len
& TX_CMD_A_LEN
) | TX_CMD_A_FCS
;
2208 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
2209 tx_cmd_a
|= TX_CMD_A_IPE
| TX_CMD_A_TPE
;
2211 if (skb_is_gso(skb
)) {
2212 u16 mss
= max(skb_shinfo(skb
)->gso_size
, TX_MSS_MIN
);
2213 tx_cmd_b
= (mss
<< TX_CMD_B_MSS_SHIFT
) & TX_CMD_B_MSS
;
2215 tx_cmd_a
|= TX_CMD_A_LSO
;
2221 cpu_to_le32s(&tx_cmd_b
);
2222 memcpy(skb
->data
, &tx_cmd_b
, 4);
2225 cpu_to_le32s(&tx_cmd_a
);
2226 memcpy(skb
->data
, &tx_cmd_a
, 4);
2231 static int smsc75xx_manage_power(struct usbnet
*dev
, int on
)
2233 dev
->intf
->needs_remote_wakeup
= on
;
2237 static const struct driver_info smsc75xx_info
= {
2238 .description
= "smsc75xx USB 2.0 Gigabit Ethernet",
2239 .bind
= smsc75xx_bind
,
2240 .unbind
= smsc75xx_unbind
,
2241 .link_reset
= smsc75xx_link_reset
,
2242 .reset
= smsc75xx_reset
,
2243 .rx_fixup
= smsc75xx_rx_fixup
,
2244 .tx_fixup
= smsc75xx_tx_fixup
,
2245 .status
= smsc75xx_status
,
2246 .manage_power
= smsc75xx_manage_power
,
2247 .flags
= FLAG_ETHER
| FLAG_SEND_ZLP
| FLAG_LINK_INTR
,
2250 static const struct usb_device_id products
[] = {
2252 /* SMSC7500 USB Gigabit Ethernet Device */
2253 USB_DEVICE(USB_VENDOR_ID_SMSC
, USB_PRODUCT_ID_LAN7500
),
2254 .driver_info
= (unsigned long) &smsc75xx_info
,
2257 /* SMSC7500 USB Gigabit Ethernet Device */
2258 USB_DEVICE(USB_VENDOR_ID_SMSC
, USB_PRODUCT_ID_LAN7505
),
2259 .driver_info
= (unsigned long) &smsc75xx_info
,
2263 MODULE_DEVICE_TABLE(usb
, products
);
2265 static struct usb_driver smsc75xx_driver
= {
2266 .name
= SMSC_CHIPNAME
,
2267 .id_table
= products
,
2268 .probe
= usbnet_probe
,
2269 .suspend
= smsc75xx_suspend
,
2270 .resume
= smsc75xx_resume
,
2271 .reset_resume
= smsc75xx_resume
,
2272 .disconnect
= usbnet_disconnect
,
2273 .disable_hub_initiated_lpm
= 1,
2274 .supports_autosuspend
= 1,
2277 module_usb_driver(smsc75xx_driver
);
2279 MODULE_AUTHOR("Nancy Lin");
2280 MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
2281 MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
2282 MODULE_LICENSE("GPL");