2 * Copyright (c) 2005-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #include <linux/module.h>
19 #include <linux/firmware.h>
30 unsigned int ath10k_debug_mask
;
31 static bool uart_print
;
32 static unsigned int ath10k_p2p
;
33 module_param_named(debug_mask
, ath10k_debug_mask
, uint
, 0644);
34 module_param(uart_print
, bool, 0644);
35 module_param_named(p2p
, ath10k_p2p
, uint
, 0644);
36 MODULE_PARM_DESC(debug_mask
, "Debugging mask");
37 MODULE_PARM_DESC(uart_print
, "Uart target debugging");
38 MODULE_PARM_DESC(p2p
, "Enable ath10k P2P support");
40 static const struct ath10k_hw_params ath10k_hw_params_list
[] = {
42 .id
= QCA988X_HW_2_0_VERSION
,
43 .name
= "qca988x hw2.0",
44 .patch_load_addr
= QCA988X_HW_2_0_PATCH_LOAD_ADDR
,
46 .dir
= QCA988X_HW_2_0_FW_DIR
,
47 .fw
= QCA988X_HW_2_0_FW_FILE
,
48 .otp
= QCA988X_HW_2_0_OTP_FILE
,
49 .board
= QCA988X_HW_2_0_BOARD_DATA_FILE
,
54 static void ath10k_send_suspend_complete(struct ath10k
*ar
)
56 ath10k_dbg(ATH10K_DBG_BOOT
, "boot suspend complete\n");
58 ar
->is_target_paused
= true;
59 wake_up(&ar
->event_queue
);
62 static int ath10k_init_connect_htc(struct ath10k
*ar
)
66 status
= ath10k_wmi_connect_htc_service(ar
);
71 status
= ath10k_htc_start(&ar
->htc
);
75 /* Wait for WMI event to be ready */
76 status
= ath10k_wmi_wait_for_service_ready(ar
);
78 ath10k_warn("wmi service ready event not received");
83 ath10k_dbg(ATH10K_DBG_BOOT
, "boot wmi ready\n");
87 ath10k_htc_stop(&ar
->htc
);
92 static int ath10k_init_configure_target(struct ath10k
*ar
)
97 /* tell target which HTC version it is used*/
98 ret
= ath10k_bmi_write32(ar
, hi_app_host_interest
,
99 HTC_PROTOCOL_VERSION
);
101 ath10k_err("settings HTC version failed\n");
105 /* set the firmware mode to STA/IBSS/AP */
106 ret
= ath10k_bmi_read32(ar
, hi_option_flag
, ¶m_host
);
108 ath10k_err("setting firmware mode (1/2) failed\n");
112 /* TODO following parameters need to be re-visited. */
114 param_host
|= (1 << HI_OPTION_NUM_DEV_SHIFT
);
116 /* FIXME: Why FW_MODE_AP ??.*/
117 param_host
|= (HI_OPTION_FW_MODE_AP
<< HI_OPTION_FW_MODE_SHIFT
);
118 /* mac_addr_method */
119 param_host
|= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT
);
120 /* firmware_bridge */
121 param_host
|= (0 << HI_OPTION_FW_BRIDGE_SHIFT
);
123 param_host
|= (0 << HI_OPTION_FW_SUBMODE_SHIFT
);
125 ret
= ath10k_bmi_write32(ar
, hi_option_flag
, param_host
);
127 ath10k_err("setting firmware mode (2/2) failed\n");
131 /* We do all byte-swapping on the host */
132 ret
= ath10k_bmi_write32(ar
, hi_be
, 0);
134 ath10k_err("setting host CPU BE mode failed\n");
138 /* FW descriptor/Data swap flags */
139 ret
= ath10k_bmi_write32(ar
, hi_fw_swap
, 0);
142 ath10k_err("setting FW data/desc swap flags failed\n");
149 static const struct firmware
*ath10k_fetch_fw_file(struct ath10k
*ar
,
154 const struct firmware
*fw
;
158 return ERR_PTR(-ENOENT
);
163 snprintf(filename
, sizeof(filename
), "%s/%s", dir
, file
);
164 ret
= request_firmware(&fw
, filename
, ar
->dev
);
171 static int ath10k_push_board_ext_data(struct ath10k
*ar
)
173 u32 board_data_size
= QCA988X_BOARD_DATA_SZ
;
174 u32 board_ext_data_size
= QCA988X_BOARD_EXT_DATA_SZ
;
175 u32 board_ext_data_addr
;
178 ret
= ath10k_bmi_read32(ar
, hi_board_ext_data
, &board_ext_data_addr
);
180 ath10k_err("could not read board ext data addr (%d)\n", ret
);
184 ath10k_dbg(ATH10K_DBG_BOOT
,
185 "boot push board extended data addr 0x%x\n",
186 board_ext_data_addr
);
188 if (board_ext_data_addr
== 0)
191 if (ar
->board_len
!= (board_data_size
+ board_ext_data_size
)) {
192 ath10k_err("invalid board (ext) data sizes %zu != %d+%d\n",
193 ar
->board_len
, board_data_size
, board_ext_data_size
);
197 ret
= ath10k_bmi_write_memory(ar
, board_ext_data_addr
,
198 ar
->board_data
+ board_data_size
,
199 board_ext_data_size
);
201 ath10k_err("could not write board ext data (%d)\n", ret
);
205 ret
= ath10k_bmi_write32(ar
, hi_board_ext_data_config
,
206 (board_ext_data_size
<< 16) | 1);
208 ath10k_err("could not write board ext data bit (%d)\n", ret
);
215 static int ath10k_download_board_data(struct ath10k
*ar
)
217 u32 board_data_size
= QCA988X_BOARD_DATA_SZ
;
221 ret
= ath10k_push_board_ext_data(ar
);
223 ath10k_err("could not push board ext data (%d)\n", ret
);
227 ret
= ath10k_bmi_read32(ar
, hi_board_data
, &address
);
229 ath10k_err("could not read board data addr (%d)\n", ret
);
233 ret
= ath10k_bmi_write_memory(ar
, address
, ar
->board_data
,
234 min_t(u32
, board_data_size
,
237 ath10k_err("could not write board data (%d)\n", ret
);
241 ret
= ath10k_bmi_write32(ar
, hi_board_data_initialized
, 1);
243 ath10k_err("could not write board data bit (%d)\n", ret
);
251 static int ath10k_download_and_run_otp(struct ath10k
*ar
)
253 u32 address
= ar
->hw_params
.patch_load_addr
;
257 /* OTP is optional */
259 if (!ar
->otp_data
|| !ar
->otp_len
)
262 ret
= ath10k_bmi_fast_download(ar
, address
, ar
->otp_data
, ar
->otp_len
);
264 ath10k_err("could not write otp (%d)\n", ret
);
269 ret
= ath10k_bmi_execute(ar
, address
, &exec_param
);
271 ath10k_err("could not execute otp (%d)\n", ret
);
279 static int ath10k_download_fw(struct ath10k
*ar
)
284 address
= ar
->hw_params
.patch_load_addr
;
286 ret
= ath10k_bmi_fast_download(ar
, address
, ar
->firmware_data
,
289 ath10k_err("could not write fw (%d)\n", ret
);
297 static void ath10k_core_free_firmware_files(struct ath10k
*ar
)
299 if (ar
->board
&& !IS_ERR(ar
->board
))
300 release_firmware(ar
->board
);
302 if (ar
->otp
&& !IS_ERR(ar
->otp
))
303 release_firmware(ar
->otp
);
305 if (ar
->firmware
&& !IS_ERR(ar
->firmware
))
306 release_firmware(ar
->firmware
);
309 ar
->board_data
= NULL
;
317 ar
->firmware_data
= NULL
;
318 ar
->firmware_len
= 0;
321 static int ath10k_core_fetch_firmware_api_1(struct ath10k
*ar
)
325 if (ar
->hw_params
.fw
.fw
== NULL
) {
326 ath10k_err("firmware file not defined\n");
330 if (ar
->hw_params
.fw
.board
== NULL
) {
331 ath10k_err("board data file not defined");
335 ar
->board
= ath10k_fetch_fw_file(ar
,
336 ar
->hw_params
.fw
.dir
,
337 ar
->hw_params
.fw
.board
);
338 if (IS_ERR(ar
->board
)) {
339 ret
= PTR_ERR(ar
->board
);
340 ath10k_err("could not fetch board data (%d)\n", ret
);
344 ar
->board_data
= ar
->board
->data
;
345 ar
->board_len
= ar
->board
->size
;
347 ar
->firmware
= ath10k_fetch_fw_file(ar
,
348 ar
->hw_params
.fw
.dir
,
349 ar
->hw_params
.fw
.fw
);
350 if (IS_ERR(ar
->firmware
)) {
351 ret
= PTR_ERR(ar
->firmware
);
352 ath10k_err("could not fetch firmware (%d)\n", ret
);
356 ar
->firmware_data
= ar
->firmware
->data
;
357 ar
->firmware_len
= ar
->firmware
->size
;
359 /* OTP may be undefined. If so, don't fetch it at all */
360 if (ar
->hw_params
.fw
.otp
== NULL
)
363 ar
->otp
= ath10k_fetch_fw_file(ar
,
364 ar
->hw_params
.fw
.dir
,
365 ar
->hw_params
.fw
.otp
);
366 if (IS_ERR(ar
->otp
)) {
367 ret
= PTR_ERR(ar
->otp
);
368 ath10k_err("could not fetch otp (%d)\n", ret
);
372 ar
->otp_data
= ar
->otp
->data
;
373 ar
->otp_len
= ar
->otp
->size
;
378 ath10k_core_free_firmware_files(ar
);
382 static int ath10k_core_fetch_firmware_api_n(struct ath10k
*ar
, const char *name
)
384 size_t magic_len
, len
, ie_len
;
385 int ie_id
, i
, index
, bit
, ret
;
386 struct ath10k_fw_ie
*hdr
;
390 /* first fetch the firmware file (firmware-*.bin) */
391 ar
->firmware
= ath10k_fetch_fw_file(ar
, ar
->hw_params
.fw
.dir
, name
);
392 if (IS_ERR(ar
->firmware
)) {
393 ath10k_err("Could not fetch firmware file '%s': %ld\n",
394 name
, PTR_ERR(ar
->firmware
));
395 return PTR_ERR(ar
->firmware
);
398 data
= ar
->firmware
->data
;
399 len
= ar
->firmware
->size
;
401 /* magic also includes the null byte, check that as well */
402 magic_len
= strlen(ATH10K_FIRMWARE_MAGIC
) + 1;
404 if (len
< magic_len
) {
405 ath10k_err("firmware image too small to contain magic: %zu\n",
411 if (memcmp(data
, ATH10K_FIRMWARE_MAGIC
, magic_len
) != 0) {
412 ath10k_err("Invalid firmware magic\n");
417 /* jump over the padding */
418 magic_len
= ALIGN(magic_len
, 4);
424 while (len
> sizeof(struct ath10k_fw_ie
)) {
425 hdr
= (struct ath10k_fw_ie
*)data
;
427 ie_id
= le32_to_cpu(hdr
->id
);
428 ie_len
= le32_to_cpu(hdr
->len
);
431 data
+= sizeof(*hdr
);
434 ath10k_err("Invalid length for FW IE %d (%zu < %zu)\n",
441 case ATH10K_FW_IE_FW_VERSION
:
442 if (ie_len
> sizeof(ar
->hw
->wiphy
->fw_version
) - 1)
445 memcpy(ar
->hw
->wiphy
->fw_version
, data
, ie_len
);
446 ar
->hw
->wiphy
->fw_version
[ie_len
] = '\0';
448 ath10k_dbg(ATH10K_DBG_BOOT
,
449 "found fw version %s\n",
450 ar
->hw
->wiphy
->fw_version
);
452 case ATH10K_FW_IE_TIMESTAMP
:
453 if (ie_len
!= sizeof(u32
))
456 timestamp
= (__le32
*)data
;
458 ath10k_dbg(ATH10K_DBG_BOOT
, "found fw timestamp %d\n",
459 le32_to_cpup(timestamp
));
461 case ATH10K_FW_IE_FEATURES
:
462 ath10k_dbg(ATH10K_DBG_BOOT
,
463 "found firmware features ie (%zd B)\n",
466 for (i
= 0; i
< ATH10K_FW_FEATURE_COUNT
; i
++) {
473 if (data
[index
] & (1 << bit
))
474 __set_bit(i
, ar
->fw_features
);
477 ath10k_dbg_dump(ATH10K_DBG_BOOT
, "features", "",
479 sizeof(ar
->fw_features
));
481 case ATH10K_FW_IE_FW_IMAGE
:
482 ath10k_dbg(ATH10K_DBG_BOOT
,
483 "found fw image ie (%zd B)\n",
486 ar
->firmware_data
= data
;
487 ar
->firmware_len
= ie_len
;
490 case ATH10K_FW_IE_OTP_IMAGE
:
491 ath10k_dbg(ATH10K_DBG_BOOT
,
492 "found otp image ie (%zd B)\n",
496 ar
->otp_len
= ie_len
;
500 ath10k_warn("Unknown FW IE: %u\n",
501 le32_to_cpu(hdr
->id
));
505 /* jump over the padding */
506 ie_len
= ALIGN(ie_len
, 4);
512 if (!ar
->firmware_data
|| !ar
->firmware_len
) {
513 ath10k_warn("No ATH10K_FW_IE_FW_IMAGE found from %s, skipping\n",
519 /* now fetch the board file */
520 if (ar
->hw_params
.fw
.board
== NULL
) {
521 ath10k_err("board data file not defined");
526 ar
->board
= ath10k_fetch_fw_file(ar
,
527 ar
->hw_params
.fw
.dir
,
528 ar
->hw_params
.fw
.board
);
529 if (IS_ERR(ar
->board
)) {
530 ret
= PTR_ERR(ar
->board
);
531 ath10k_err("could not fetch board data (%d)\n", ret
);
535 ar
->board_data
= ar
->board
->data
;
536 ar
->board_len
= ar
->board
->size
;
541 ath10k_core_free_firmware_files(ar
);
545 static int ath10k_core_fetch_firmware_files(struct ath10k
*ar
)
549 ret
= ath10k_core_fetch_firmware_api_n(ar
, ATH10K_FW_API2_FILE
);
555 ret
= ath10k_core_fetch_firmware_api_1(ar
);
562 ath10k_dbg(ATH10K_DBG_BOOT
, "using fw api %d\n", ar
->fw_api
);
567 static int ath10k_init_download_firmware(struct ath10k
*ar
)
571 ret
= ath10k_download_board_data(ar
);
575 ret
= ath10k_download_and_run_otp(ar
);
579 ret
= ath10k_download_fw(ar
);
586 static int ath10k_init_uart(struct ath10k
*ar
)
591 * Explicitly setting UART prints to zero as target turns it on
592 * based on scratch registers.
594 ret
= ath10k_bmi_write32(ar
, hi_serial_enable
, 0);
596 ath10k_warn("could not disable UART prints (%d)\n", ret
);
603 ret
= ath10k_bmi_write32(ar
, hi_dbg_uart_txpin
, 7);
605 ath10k_warn("could not enable UART prints (%d)\n", ret
);
609 ret
= ath10k_bmi_write32(ar
, hi_serial_enable
, 1);
611 ath10k_warn("could not enable UART prints (%d)\n", ret
);
615 /* Set the UART baud rate to 19200. */
616 ret
= ath10k_bmi_write32(ar
, hi_desired_baud_rate
, 19200);
618 ath10k_warn("could not set the baud rate (%d)\n", ret
);
622 ath10k_info("UART prints enabled\n");
626 static int ath10k_init_hw_params(struct ath10k
*ar
)
628 const struct ath10k_hw_params
*uninitialized_var(hw_params
);
631 for (i
= 0; i
< ARRAY_SIZE(ath10k_hw_params_list
); i
++) {
632 hw_params
= &ath10k_hw_params_list
[i
];
634 if (hw_params
->id
== ar
->target_version
)
638 if (i
== ARRAY_SIZE(ath10k_hw_params_list
)) {
639 ath10k_err("Unsupported hardware version: 0x%x\n",
644 ar
->hw_params
= *hw_params
;
646 ath10k_dbg(ATH10K_DBG_BOOT
, "Hardware name %s version 0x%x\n",
647 ar
->hw_params
.name
, ar
->target_version
);
652 static void ath10k_core_restart(struct work_struct
*work
)
654 struct ath10k
*ar
= container_of(work
, struct ath10k
, restart_work
);
656 mutex_lock(&ar
->conf_mutex
);
659 case ATH10K_STATE_ON
:
661 ar
->state
= ATH10K_STATE_RESTARTING
;
662 ieee80211_restart_hw(ar
->hw
);
664 case ATH10K_STATE_OFF
:
665 /* this can happen if driver is being unloaded
666 * or if the crash happens during FW probing */
667 ath10k_warn("cannot restart a device that hasn't been started\n");
669 case ATH10K_STATE_RESTARTING
:
670 case ATH10K_STATE_RESTARTED
:
671 ar
->state
= ATH10K_STATE_WEDGED
;
673 case ATH10K_STATE_WEDGED
:
674 ath10k_warn("device is wedged, will not restart\n");
678 mutex_unlock(&ar
->conf_mutex
);
681 struct ath10k
*ath10k_core_create(void *hif_priv
, struct device
*dev
,
682 const struct ath10k_hif_ops
*hif_ops
)
686 ar
= ath10k_mac_create();
690 ar
->ath_common
.priv
= ar
;
691 ar
->ath_common
.hw
= ar
->hw
;
693 ar
->p2p
= !!ath10k_p2p
;
696 ar
->hif
.priv
= hif_priv
;
697 ar
->hif
.ops
= hif_ops
;
699 init_completion(&ar
->scan
.started
);
700 init_completion(&ar
->scan
.completed
);
701 init_completion(&ar
->scan
.on_channel
);
703 init_completion(&ar
->install_key_done
);
704 init_completion(&ar
->vdev_setup_done
);
706 setup_timer(&ar
->scan
.timeout
, ath10k_reset_scan
, (unsigned long)ar
);
708 ar
->workqueue
= create_singlethread_workqueue("ath10k_wq");
712 mutex_init(&ar
->conf_mutex
);
713 spin_lock_init(&ar
->data_lock
);
715 INIT_LIST_HEAD(&ar
->peers
);
716 init_waitqueue_head(&ar
->peer_mapping_wq
);
718 init_completion(&ar
->offchan_tx_completed
);
719 INIT_WORK(&ar
->offchan_tx_work
, ath10k_offchan_tx_work
);
720 skb_queue_head_init(&ar
->offchan_tx_queue
);
722 INIT_WORK(&ar
->wmi_mgmt_tx_work
, ath10k_mgmt_over_wmi_tx_work
);
723 skb_queue_head_init(&ar
->wmi_mgmt_tx_queue
);
725 init_waitqueue_head(&ar
->event_queue
);
727 INIT_WORK(&ar
->restart_work
, ath10k_core_restart
);
732 ath10k_mac_destroy(ar
);
735 EXPORT_SYMBOL(ath10k_core_create
);
737 void ath10k_core_destroy(struct ath10k
*ar
)
739 flush_workqueue(ar
->workqueue
);
740 destroy_workqueue(ar
->workqueue
);
742 ath10k_mac_destroy(ar
);
744 EXPORT_SYMBOL(ath10k_core_destroy
);
746 int ath10k_core_start(struct ath10k
*ar
)
750 lockdep_assert_held(&ar
->conf_mutex
);
752 ath10k_bmi_start(ar
);
754 if (ath10k_init_configure_target(ar
)) {
759 status
= ath10k_init_download_firmware(ar
);
763 status
= ath10k_init_uart(ar
);
767 ar
->htc
.htc_ops
.target_send_suspend_complete
=
768 ath10k_send_suspend_complete
;
770 status
= ath10k_htc_init(ar
);
772 ath10k_err("could not init HTC (%d)\n", status
);
776 status
= ath10k_bmi_done(ar
);
780 status
= ath10k_wmi_attach(ar
);
782 ath10k_err("WMI attach failed: %d\n", status
);
786 status
= ath10k_hif_start(ar
);
788 ath10k_err("could not start HIF: %d\n", status
);
792 status
= ath10k_htc_wait_target(&ar
->htc
);
794 ath10k_err("failed to connect to HTC: %d\n", status
);
798 status
= ath10k_htt_attach(ar
);
800 ath10k_err("could not attach htt (%d)\n", status
);
804 status
= ath10k_init_connect_htc(ar
);
808 ath10k_dbg(ATH10K_DBG_BOOT
, "firmware %s booted\n",
809 ar
->hw
->wiphy
->fw_version
);
811 status
= ath10k_wmi_cmd_init(ar
);
813 ath10k_err("could not send WMI init command (%d)\n", status
);
814 goto err_disconnect_htc
;
817 status
= ath10k_wmi_wait_for_unified_ready(ar
);
819 ath10k_err("wmi unified ready event not received\n");
821 goto err_disconnect_htc
;
824 status
= ath10k_htt_attach_target(&ar
->htt
);
826 goto err_disconnect_htc
;
828 status
= ath10k_debug_start(ar
);
830 goto err_disconnect_htc
;
832 ar
->free_vdev_map
= (1 << TARGET_NUM_VDEVS
) - 1;
833 INIT_LIST_HEAD(&ar
->arvifs
);
835 if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE
, &ar
->dev_flags
))
836 ath10k_info("%s (0x%x) fw %s api %d htt %d.%d\n",
837 ar
->hw_params
.name
, ar
->target_version
,
838 ar
->hw
->wiphy
->fw_version
, ar
->fw_api
,
839 ar
->htt
.target_version_major
,
840 ar
->htt
.target_version_minor
);
842 __set_bit(ATH10K_FLAG_FIRST_BOOT_DONE
, &ar
->dev_flags
);
847 ath10k_htc_stop(&ar
->htc
);
849 ath10k_htt_detach(&ar
->htt
);
853 ath10k_wmi_detach(ar
);
857 EXPORT_SYMBOL(ath10k_core_start
);
859 void ath10k_core_stop(struct ath10k
*ar
)
861 lockdep_assert_held(&ar
->conf_mutex
);
863 ath10k_debug_stop(ar
);
864 ath10k_htc_stop(&ar
->htc
);
865 ath10k_htt_detach(&ar
->htt
);
866 ath10k_wmi_detach(ar
);
868 EXPORT_SYMBOL(ath10k_core_stop
);
870 /* mac80211 manages fw/hw initialization through start/stop hooks. However in
871 * order to know what hw capabilities should be advertised to mac80211 it is
872 * necessary to load the firmware (and tear it down immediately since start
873 * hook will try to init it again) before registering */
874 static int ath10k_core_probe_fw(struct ath10k
*ar
)
876 struct bmi_target_info target_info
;
879 ret
= ath10k_hif_power_up(ar
);
881 ath10k_err("could not start pci hif (%d)\n", ret
);
885 memset(&target_info
, 0, sizeof(target_info
));
886 ret
= ath10k_bmi_get_target_info(ar
, &target_info
);
888 ath10k_err("could not get target info (%d)\n", ret
);
889 ath10k_hif_power_down(ar
);
893 ar
->target_version
= target_info
.version
;
894 ar
->hw
->wiphy
->hw_version
= target_info
.version
;
896 ret
= ath10k_init_hw_params(ar
);
898 ath10k_err("could not get hw params (%d)\n", ret
);
899 ath10k_hif_power_down(ar
);
903 ret
= ath10k_core_fetch_firmware_files(ar
);
905 ath10k_err("could not fetch firmware files (%d)\n", ret
);
906 ath10k_hif_power_down(ar
);
910 mutex_lock(&ar
->conf_mutex
);
912 ret
= ath10k_core_start(ar
);
914 ath10k_err("could not init core (%d)\n", ret
);
915 ath10k_core_free_firmware_files(ar
);
916 ath10k_hif_power_down(ar
);
917 mutex_unlock(&ar
->conf_mutex
);
921 ath10k_core_stop(ar
);
923 mutex_unlock(&ar
->conf_mutex
);
925 ath10k_hif_power_down(ar
);
929 static int ath10k_core_check_chip_id(struct ath10k
*ar
)
931 u32 hw_revision
= MS(ar
->chip_id
, SOC_CHIP_ID_REV
);
933 ath10k_dbg(ATH10K_DBG_BOOT
, "boot chip_id 0x%08x hw_revision 0x%x\n",
934 ar
->chip_id
, hw_revision
);
936 /* Check that we are not using hw1.0 (some of them have same pci id
937 * as hw2.0) before doing anything else as ath10k crashes horribly
938 * due to missing hw1.0 workarounds. */
939 switch (hw_revision
) {
940 case QCA988X_HW_1_0_CHIP_ID_REV
:
941 ath10k_err("ERROR: qca988x hw1.0 is not supported\n");
944 case QCA988X_HW_2_0_CHIP_ID_REV
:
945 /* known hardware revision, continue normally */
949 ath10k_warn("Warning: hardware revision unknown (0x%x), expect problems\n",
957 int ath10k_core_register(struct ath10k
*ar
, u32 chip_id
)
961 ar
->chip_id
= chip_id
;
963 status
= ath10k_core_check_chip_id(ar
);
965 ath10k_err("Unsupported chip id 0x%08x\n", ar
->chip_id
);
969 status
= ath10k_core_probe_fw(ar
);
971 ath10k_err("could not probe fw (%d)\n", status
);
975 status
= ath10k_mac_register(ar
);
977 ath10k_err("could not register to mac80211 (%d)\n", status
);
981 status
= ath10k_debug_create(ar
);
983 ath10k_err("unable to initialize debugfs\n");
984 goto err_unregister_mac
;
990 ath10k_mac_unregister(ar
);
992 ath10k_core_free_firmware_files(ar
);
995 EXPORT_SYMBOL(ath10k_core_register
);
997 void ath10k_core_unregister(struct ath10k
*ar
)
999 /* We must unregister from mac80211 before we stop HTC and HIF.
1000 * Otherwise we will fail to submit commands to FW and mac80211 will be
1001 * unhappy about callback failures. */
1002 ath10k_mac_unregister(ar
);
1004 ath10k_core_free_firmware_files(ar
);
1006 ath10k_debug_destroy(ar
);
1008 EXPORT_SYMBOL(ath10k_core_unregister
);
1010 MODULE_AUTHOR("Qualcomm Atheros");
1011 MODULE_DESCRIPTION("Core module for QCA988X PCIe devices.");
1012 MODULE_LICENSE("Dual BSD/GPL");