1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24 * The full GNU General Public License is included in this distribution
25 * in the file called COPYING.
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
33 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
34 * All rights reserved.
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61 *****************************************************************************/
63 #ifndef __fw_api_rs_h__
64 #define __fw_api_rs_h__
66 #include "fw-api-mac.h"
69 * These serve as indexes into
70 * struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT];
71 * TODO: avoid overlap between legacy and HT rates
74 IWL_RATE_1M_INDEX
= 0,
75 IWL_FIRST_CCK_RATE
= IWL_RATE_1M_INDEX
,
79 IWL_LAST_CCK_RATE
= IWL_RATE_11M_INDEX
,
81 IWL_FIRST_OFDM_RATE
= IWL_RATE_6M_INDEX
,
82 IWL_RATE_MCS_0_INDEX
= IWL_RATE_6M_INDEX
,
83 IWL_FIRST_HT_RATE
= IWL_RATE_MCS_0_INDEX
,
84 IWL_FIRST_VHT_RATE
= IWL_RATE_MCS_0_INDEX
,
87 IWL_RATE_MCS_1_INDEX
= IWL_RATE_12M_INDEX
,
89 IWL_RATE_MCS_2_INDEX
= IWL_RATE_18M_INDEX
,
91 IWL_RATE_MCS_3_INDEX
= IWL_RATE_24M_INDEX
,
93 IWL_RATE_MCS_4_INDEX
= IWL_RATE_36M_INDEX
,
95 IWL_RATE_MCS_5_INDEX
= IWL_RATE_48M_INDEX
,
97 IWL_RATE_MCS_6_INDEX
= IWL_RATE_54M_INDEX
,
98 IWL_LAST_NON_HT_RATE
= IWL_RATE_54M_INDEX
,
100 IWL_RATE_MCS_7_INDEX
= IWL_RATE_60M_INDEX
,
101 IWL_LAST_HT_RATE
= IWL_RATE_MCS_7_INDEX
,
102 IWL_RATE_MCS_8_INDEX
,
103 IWL_RATE_MCS_9_INDEX
,
104 IWL_LAST_VHT_RATE
= IWL_RATE_MCS_9_INDEX
,
105 IWL_RATE_COUNT_LEGACY
= IWL_LAST_NON_HT_RATE
+ 1,
106 IWL_RATE_COUNT
= IWL_LAST_VHT_RATE
+ 1,
109 #define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX)
111 /* fw API values for legacy bit rates, both OFDM and CCK */
113 IWL_RATE_6M_PLCP
= 13,
114 IWL_RATE_9M_PLCP
= 15,
115 IWL_RATE_12M_PLCP
= 5,
116 IWL_RATE_18M_PLCP
= 7,
117 IWL_RATE_24M_PLCP
= 9,
118 IWL_RATE_36M_PLCP
= 11,
119 IWL_RATE_48M_PLCP
= 1,
120 IWL_RATE_54M_PLCP
= 3,
121 IWL_RATE_1M_PLCP
= 10,
122 IWL_RATE_2M_PLCP
= 20,
123 IWL_RATE_5M_PLCP
= 55,
124 IWL_RATE_11M_PLCP
= 110,
125 IWL_RATE_INVM_PLCP
= -1,
129 * rate_n_flags bit fields
131 * The 32-bit value has different layouts in the low 8 bites depending on the
132 * format. There are three formats, HT, VHT and legacy (11abg, with subformats
135 * High-throughput (HT) rate format
136 * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM)
137 * Very High-throughput (VHT) rate format
138 * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM)
139 * Legacy OFDM rate format for bits 7:0
140 * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM)
141 * Legacy CCK rate format for bits 7:0:
142 * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK)
145 /* Bit 8: (1) HT format, (0) legacy or VHT format */
146 #define RATE_MCS_HT_POS 8
147 #define RATE_MCS_HT_MSK (1 << RATE_MCS_HT_POS)
149 /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
150 #define RATE_MCS_CCK_POS 9
151 #define RATE_MCS_CCK_MSK (1 << RATE_MCS_CCK_POS)
153 /* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */
154 #define RATE_MCS_VHT_POS 26
155 #define RATE_MCS_VHT_MSK (1 << RATE_MCS_VHT_POS)
159 * High-throughput (HT) rate format for bits 7:0
170 * 4-3: 0) Single stream (SISO)
171 * 1) Dual stream (MIMO)
172 * 2) Triple stream (MIMO)
173 * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
174 * (bits 7-6 are zero)
176 * Together the low 5 bits work out to the MCS index because we don't
177 * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two
178 * streams and 16-23 have three streams. We could also support MCS 32
179 * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.)
181 #define RATE_HT_MCS_RATE_CODE_MSK 0x7
182 #define RATE_HT_MCS_NSS_POS 3
183 #define RATE_HT_MCS_NSS_MSK (3 << RATE_HT_MCS_NSS_POS)
185 /* Bit 10: (1) Use Green Field preamble */
186 #define RATE_HT_MCS_GF_POS 10
187 #define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS)
189 #define RATE_HT_MCS_INDEX_MSK 0x3f
192 * Very High-throughput (VHT) rate format for bits 7:0
195 * 5-4: number of streams - 1:
196 * 0) Single stream (SISO)
197 * 1) Dual stream (MIMO)
198 * 2) Triple stream (MIMO)
201 /* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */
202 #define RATE_VHT_MCS_RATE_CODE_MSK 0xf
203 #define RATE_VHT_MCS_NSS_POS 4
204 #define RATE_VHT_MCS_NSS_MSK (3 << RATE_VHT_MCS_NSS_POS)
207 * Legacy OFDM rate format for bits 7:0
219 * Legacy CCK rate format for bits 7:0:
220 * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK):
228 #define RATE_LEGACY_RATE_MSK 0xff
232 * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz
233 * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT
235 #define RATE_MCS_CHAN_WIDTH_POS 11
236 #define RATE_MCS_CHAN_WIDTH_MSK (3 << RATE_MCS_CHAN_WIDTH_POS)
237 #define RATE_MCS_CHAN_WIDTH_20 (0 << RATE_MCS_CHAN_WIDTH_POS)
238 #define RATE_MCS_CHAN_WIDTH_40 (1 << RATE_MCS_CHAN_WIDTH_POS)
239 #define RATE_MCS_CHAN_WIDTH_80 (2 << RATE_MCS_CHAN_WIDTH_POS)
240 #define RATE_MCS_CHAN_WIDTH_160 (3 << RATE_MCS_CHAN_WIDTH_POS)
242 /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
243 #define RATE_MCS_SGI_POS 13
244 #define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS)
246 /* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */
247 #define RATE_MCS_ANT_POS 14
248 #define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS)
249 #define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS)
250 #define RATE_MCS_ANT_C_MSK (4 << RATE_MCS_ANT_POS)
251 #define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \
253 #define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | \
255 #define RATE_MCS_ANT_MSK RATE_MCS_ANT_ABC_MSK
256 #define RATE_MCS_ANT_NUM 3
258 /* Bit 17-18: (0) SS, (1) SS*2 */
259 #define RATE_MCS_STBC_POS 17
260 #define RATE_MCS_STBC_MSK (1 << RATE_MCS_STBC_POS)
262 /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
263 #define RATE_MCS_BF_POS 19
264 #define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS)
266 /* Bit 20: (0) ZLF is off, (1) ZLF is on */
267 #define RATE_MCS_ZLF_POS 20
268 #define RATE_MCS_ZLF_MSK (1 << RATE_MCS_ZLF_POS)
270 /* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */
271 #define RATE_MCS_DUP_POS 24
272 #define RATE_MCS_DUP_MSK (3 << RATE_MCS_DUP_POS)
274 /* Bit 27: (1) LDPC enabled, (0) LDPC disabled */
275 #define RATE_MCS_LDPC_POS 27
276 #define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS)
279 /* Link Quality definitions */
281 /* # entries in rate scale table to support Tx retries */
282 #define LQ_MAX_RETRY_NUM 16
284 /* Link quality command flags bit fields */
286 /* Bit 0: (0) Don't use RTS (1) Use RTS */
287 #define LQ_FLAG_USE_RTS_POS 0
288 #define LQ_FLAG_USE_RTS_MSK (1 << LQ_FLAG_USE_RTS_POS)
290 /* Bit 1-3: LQ command color. Used to match responses to LQ commands */
291 #define LQ_FLAG_COLOR_POS 1
292 #define LQ_FLAG_COLOR_MSK (7 << LQ_FLAG_COLOR_POS)
294 /* Bit 4-5: Tx RTS BW Signalling
295 * (0) No RTS BW signalling
296 * (1) Static BW signalling
297 * (2) Dynamic BW signalling
299 #define LQ_FLAG_RTS_BW_SIG_POS 4
300 #define LQ_FLAG_RTS_BW_SIG_NONE (0 << LQ_FLAG_RTS_BW_SIG_POS)
301 #define LQ_FLAG_RTS_BW_SIG_STATIC (1 << LQ_FLAG_RTS_BW_SIG_POS)
302 #define LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << LQ_FLAG_RTS_BW_SIG_POS)
304 /* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection
305 * Dyanmic BW selection allows Tx with narrower BW then requested in rates
307 #define LQ_FLAG_DYNAMIC_BW_POS 6
308 #define LQ_FLAG_DYNAMIC_BW_MSK (1 << LQ_FLAG_DYNAMIC_BW_POS)
311 * struct iwl_lq_cmd - link quality command
312 * @sta_id: station to update
314 * @flags: combination of LQ_FLAG_*
315 * @mimo_delim: the first SISO index in rs_table, which separates MIMO
317 * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD).
318 * Should be ANT_[ABC]
319 * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC]
320 * @initial_rate_index: first index from rs_table per AC category
321 * @agg_time_limit: aggregation max time threshold in usec/100, meaning
322 * value of 100 is one usec. Range is 100 to 8000
323 * @agg_disable_start_th: try-count threshold for starting aggregation.
324 * If a frame has higher try-count, it should not be selected for
325 * starting an aggregation sequence.
326 * @agg_frame_cnt_limit: max frame count in an aggregation.
328 * 1: no aggregation (one frame per aggregation)
329 * 2 - 0x3f: maximal number of frames (up to 3f == 63)
330 * @rs_table: array of rates for each TX try, each is rate_n_flags,
331 * meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP
332 * @bf_params: beam forming params, currently not used
338 /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */
341 u8 single_stream_ant_msk
;
342 u8 dual_stream_ant_msk
;
343 u8 initial_rate_index
[AC_NUM
];
344 /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */
345 __le16 agg_time_limit
;
346 u8 agg_disable_start_th
;
347 u8 agg_frame_cnt_limit
;
349 __le32 rs_table
[LQ_MAX_RETRY_NUM
];
351 }; /* LINK_QUALITY_CMD_API_S_VER_1 */
352 #endif /* __fw_api_rs_h__ */