2 * Marvell Wireless LAN device driver: PCIE specific handling
4 * Copyright (C) 2011, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
20 #include <linux/firmware.h>
31 #define PCIE_VERSION "1.0"
32 #define DRV_NAME "Marvell mwifiex PCIe"
36 static struct mwifiex_if_ops pcie_ops
;
38 static struct semaphore add_remove_card_sem
;
41 mwifiex_map_pci_memory(struct mwifiex_adapter
*adapter
, struct sk_buff
*skb
,
44 struct pcie_service_card
*card
= adapter
->card
;
47 buf_pa
= pci_map_single(card
->dev
, skb
->data
, size
, flags
);
48 if (pci_dma_mapping_error(card
->dev
, buf_pa
)) {
49 dev_err(adapter
->dev
, "failed to map pci memory!\n");
52 memcpy(skb
->cb
, &buf_pa
, sizeof(dma_addr_t
));
57 * This function reads sleep cookie and checks if FW is ready
59 static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter
*adapter
)
62 struct pcie_service_card
*card
= adapter
->card
;
63 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
65 if (!reg
->sleep_cookie
)
68 if (card
->sleep_cookie_vbase
) {
69 cookie_addr
= (u32
*)card
->sleep_cookie_vbase
;
70 dev_dbg(adapter
->dev
, "info: ACCESS_HW: sleep cookie=0x%x\n",
72 if (*cookie_addr
== FW_AWAKE_COOKIE
)
79 #ifdef CONFIG_PM_SLEEP
81 * Kernel needs to suspend all functions separately. Therefore all
82 * registered functions must have drivers with suspend and resume
83 * methods. Failing that the kernel simply removes the whole card.
85 * If already not suspended, this function allocates and sends a host
86 * sleep activate request to the firmware and turns off the traffic.
88 static int mwifiex_pcie_suspend(struct device
*dev
)
90 struct mwifiex_adapter
*adapter
;
91 struct pcie_service_card
*card
;
93 struct pci_dev
*pdev
= to_pci_dev(dev
);
96 card
= pci_get_drvdata(pdev
);
97 if (!card
|| !card
->adapter
) {
98 pr_err("Card or adapter structure is not valid\n");
102 pr_err("PCIE device is not specified\n");
106 adapter
= card
->adapter
;
108 hs_actived
= mwifiex_enable_hs(adapter
);
110 /* Indicate device suspended */
111 adapter
->is_suspended
= true;
117 * Kernel needs to suspend all functions separately. Therefore all
118 * registered functions must have drivers with suspend and resume
119 * methods. Failing that the kernel simply removes the whole card.
121 * If already not resumed, this function turns on the traffic and
122 * sends a host sleep cancel request to the firmware.
124 static int mwifiex_pcie_resume(struct device
*dev
)
126 struct mwifiex_adapter
*adapter
;
127 struct pcie_service_card
*card
;
128 struct pci_dev
*pdev
= to_pci_dev(dev
);
131 card
= pci_get_drvdata(pdev
);
132 if (!card
|| !card
->adapter
) {
133 pr_err("Card or adapter structure is not valid\n");
137 pr_err("PCIE device is not specified\n");
141 adapter
= card
->adapter
;
143 if (!adapter
->is_suspended
) {
144 dev_warn(adapter
->dev
, "Device already resumed\n");
148 adapter
->is_suspended
= false;
150 mwifiex_cancel_hs(mwifiex_get_priv(adapter
, MWIFIEX_BSS_ROLE_STA
),
158 * This function probes an mwifiex device and registers it. It allocates
159 * the card structure, enables PCIE function number and initiates the
160 * device registration and initialization procedure by adding a logical
163 static int mwifiex_pcie_probe(struct pci_dev
*pdev
,
164 const struct pci_device_id
*ent
)
166 struct pcie_service_card
*card
;
168 pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n",
169 pdev
->vendor
, pdev
->device
, pdev
->revision
);
171 card
= kzalloc(sizeof(struct pcie_service_card
), GFP_KERNEL
);
177 if (ent
->driver_data
) {
178 struct mwifiex_pcie_device
*data
= (void *)ent
->driver_data
;
179 card
->pcie
.firmware
= data
->firmware
;
180 card
->pcie
.reg
= data
->reg
;
181 card
->pcie
.blksz_fw_dl
= data
->blksz_fw_dl
;
184 if (mwifiex_add_card(card
, &add_remove_card_sem
, &pcie_ops
,
186 pr_err("%s failed\n", __func__
);
195 * This function removes the interface and frees up the card structure.
197 static void mwifiex_pcie_remove(struct pci_dev
*pdev
)
199 struct pcie_service_card
*card
;
200 struct mwifiex_adapter
*adapter
;
201 struct mwifiex_private
*priv
;
204 card
= pci_get_drvdata(pdev
);
208 adapter
= card
->adapter
;
209 if (!adapter
|| !adapter
->priv_num
)
212 /* In case driver is removed when asynchronous FW load is in progress */
213 wait_for_completion(&adapter
->fw_load
);
216 #ifdef CONFIG_PM_SLEEP
217 if (adapter
->is_suspended
)
218 mwifiex_pcie_resume(&pdev
->dev
);
221 for (i
= 0; i
< adapter
->priv_num
; i
++)
222 if ((GET_BSS_ROLE(adapter
->priv
[i
]) ==
223 MWIFIEX_BSS_ROLE_STA
) &&
224 adapter
->priv
[i
]->media_connected
)
225 mwifiex_deauthenticate(adapter
->priv
[i
], NULL
);
227 priv
= mwifiex_get_priv(adapter
, MWIFIEX_BSS_ROLE_ANY
);
229 mwifiex_disable_auto_ds(priv
);
231 mwifiex_init_shutdown_fw(priv
, MWIFIEX_FUNC_SHUTDOWN
);
234 mwifiex_remove_card(card
->adapter
, &add_remove_card_sem
);
237 static void mwifiex_pcie_shutdown(struct pci_dev
*pdev
)
240 mwifiex_pcie_remove(pdev
);
245 static DEFINE_PCI_DEVICE_TABLE(mwifiex_ids
) = {
247 PCIE_VENDOR_ID_MARVELL
, PCIE_DEVICE_ID_MARVELL_88W8766P
,
248 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
249 .driver_data
= (unsigned long) &mwifiex_pcie8766
,
252 PCIE_VENDOR_ID_MARVELL
, PCIE_DEVICE_ID_MARVELL_88W8897
,
253 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
254 .driver_data
= (unsigned long) &mwifiex_pcie8897
,
259 MODULE_DEVICE_TABLE(pci
, mwifiex_ids
);
261 #ifdef CONFIG_PM_SLEEP
262 /* Power Management Hooks */
263 static SIMPLE_DEV_PM_OPS(mwifiex_pcie_pm_ops
, mwifiex_pcie_suspend
,
264 mwifiex_pcie_resume
);
267 /* PCI Device Driver */
268 static struct pci_driver __refdata mwifiex_pcie
= {
269 .name
= "mwifiex_pcie",
270 .id_table
= mwifiex_ids
,
271 .probe
= mwifiex_pcie_probe
,
272 .remove
= mwifiex_pcie_remove
,
273 #ifdef CONFIG_PM_SLEEP
275 .pm
= &mwifiex_pcie_pm_ops
,
278 .shutdown
= mwifiex_pcie_shutdown
,
282 * This function writes data into PCIE card register.
284 static int mwifiex_write_reg(struct mwifiex_adapter
*adapter
, int reg
, u32 data
)
286 struct pcie_service_card
*card
= adapter
->card
;
288 iowrite32(data
, card
->pci_mmap1
+ reg
);
294 * This function reads data from PCIE card register.
296 static int mwifiex_read_reg(struct mwifiex_adapter
*adapter
, int reg
, u32
*data
)
298 struct pcie_service_card
*card
= adapter
->card
;
300 *data
= ioread32(card
->pci_mmap1
+ reg
);
306 * This function adds delay loop to ensure FW is awake before proceeding.
308 static void mwifiex_pcie_dev_wakeup_delay(struct mwifiex_adapter
*adapter
)
312 while (mwifiex_pcie_ok_to_access_hw(adapter
)) {
314 usleep_range(10, 20);
323 /* This function wakes up the card by reading fw_status register. */
324 static int mwifiex_pm_wakeup_card(struct mwifiex_adapter
*adapter
)
327 struct pcie_service_card
*card
= adapter
->card
;
328 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
330 dev_dbg(adapter
->dev
, "event: Wakeup device...\n");
332 if (reg
->sleep_cookie
)
333 mwifiex_pcie_dev_wakeup_delay(adapter
);
335 /* Reading fw_status register will wakeup device */
336 if (mwifiex_read_reg(adapter
, reg
->fw_status
, &fw_status
)) {
337 dev_warn(adapter
->dev
, "Reading fw_status register failed\n");
341 if (reg
->sleep_cookie
) {
342 mwifiex_pcie_dev_wakeup_delay(adapter
);
343 dev_dbg(adapter
->dev
, "PCIE wakeup: Setting PS_STATE_AWAKE\n");
344 adapter
->ps_state
= PS_STATE_AWAKE
;
351 * This function is called after the card has woken up.
353 * The card configuration register is reset.
355 static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter
*adapter
)
357 dev_dbg(adapter
->dev
, "cmd: Wakeup device completed\n");
363 * This function disables the host interrupt.
365 * The host interrupt mask is read, the disable bit is reset and
366 * written back to the card host interrupt mask register.
368 static int mwifiex_pcie_disable_host_int(struct mwifiex_adapter
*adapter
)
370 if (mwifiex_pcie_ok_to_access_hw(adapter
)) {
371 if (mwifiex_write_reg(adapter
, PCIE_HOST_INT_MASK
,
373 dev_warn(adapter
->dev
, "Disable host interrupt failed\n");
382 * This function enables the host interrupt.
384 * The host interrupt enable mask is written to the card
385 * host interrupt mask register.
387 static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter
*adapter
)
389 if (mwifiex_pcie_ok_to_access_hw(adapter
)) {
390 /* Simply write the mask to the register */
391 if (mwifiex_write_reg(adapter
, PCIE_HOST_INT_MASK
,
393 dev_warn(adapter
->dev
, "Enable host interrupt failed\n");
402 * This function initializes TX buffer ring descriptors
404 static int mwifiex_init_txq_ring(struct mwifiex_adapter
*adapter
)
406 struct pcie_service_card
*card
= adapter
->card
;
407 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
408 struct mwifiex_pcie_buf_desc
*desc
;
409 struct mwifiex_pfu_buf_desc
*desc2
;
412 for (i
= 0; i
< MWIFIEX_MAX_TXRX_BD
; i
++) {
413 card
->tx_buf_list
[i
] = NULL
;
414 if (reg
->pfu_enabled
) {
415 card
->txbd_ring
[i
] = (void *)card
->txbd_ring_vbase
+
416 (sizeof(*desc2
) * i
);
417 desc2
= card
->txbd_ring
[i
];
418 memset(desc2
, 0, sizeof(*desc2
));
420 card
->txbd_ring
[i
] = (void *)card
->txbd_ring_vbase
+
422 desc
= card
->txbd_ring
[i
];
423 memset(desc
, 0, sizeof(*desc
));
430 /* This function initializes RX buffer ring descriptors. Each SKB is allocated
431 * here and after mapping PCI memory, its physical address is assigned to
432 * PCIE Rx buffer descriptor's physical address.
434 static int mwifiex_init_rxq_ring(struct mwifiex_adapter
*adapter
)
436 struct pcie_service_card
*card
= adapter
->card
;
437 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
439 struct mwifiex_pcie_buf_desc
*desc
;
440 struct mwifiex_pfu_buf_desc
*desc2
;
444 for (i
= 0; i
< MWIFIEX_MAX_TXRX_BD
; i
++) {
445 /* Allocate skb here so that firmware can DMA data from it */
446 skb
= dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE
);
448 dev_err(adapter
->dev
,
449 "Unable to allocate skb for RX ring.\n");
450 kfree(card
->rxbd_ring_vbase
);
454 if (mwifiex_map_pci_memory(adapter
, skb
,
455 MWIFIEX_RX_DATA_BUF_SIZE
,
459 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
461 dev_dbg(adapter
->dev
,
462 "info: RX ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n",
463 skb
, skb
->len
, skb
->data
, (u32
)buf_pa
,
464 (u32
)((u64
)buf_pa
>> 32));
466 card
->rx_buf_list
[i
] = skb
;
467 if (reg
->pfu_enabled
) {
468 card
->rxbd_ring
[i
] = (void *)card
->rxbd_ring_vbase
+
469 (sizeof(*desc2
) * i
);
470 desc2
= card
->rxbd_ring
[i
];
471 desc2
->paddr
= buf_pa
;
472 desc2
->len
= (u16
)skb
->len
;
473 desc2
->frag_len
= (u16
)skb
->len
;
474 desc2
->flags
= reg
->ring_flag_eop
| reg
->ring_flag_sop
;
477 card
->rxbd_ring
[i
] = (void *)(card
->rxbd_ring_vbase
+
478 (sizeof(*desc
) * i
));
479 desc
= card
->rxbd_ring
[i
];
480 desc
->paddr
= buf_pa
;
481 desc
->len
= (u16
)skb
->len
;
489 /* This function initializes event buffer ring descriptors. Each SKB is
490 * allocated here and after mapping PCI memory, its physical address is assigned
491 * to PCIE Rx buffer descriptor's physical address
493 static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter
*adapter
)
495 struct pcie_service_card
*card
= adapter
->card
;
496 struct mwifiex_evt_buf_desc
*desc
;
501 for (i
= 0; i
< MWIFIEX_MAX_EVT_BD
; i
++) {
502 /* Allocate skb here so that firmware can DMA data from it */
503 skb
= dev_alloc_skb(MAX_EVENT_SIZE
);
505 dev_err(adapter
->dev
,
506 "Unable to allocate skb for EVENT buf.\n");
507 kfree(card
->evtbd_ring_vbase
);
510 skb_put(skb
, MAX_EVENT_SIZE
);
512 if (mwifiex_map_pci_memory(adapter
, skb
, MAX_EVENT_SIZE
,
516 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
518 dev_dbg(adapter
->dev
,
519 "info: EVT ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n",
520 skb
, skb
->len
, skb
->data
, (u32
)buf_pa
,
521 (u32
)((u64
)buf_pa
>> 32));
523 card
->evt_buf_list
[i
] = skb
;
524 card
->evtbd_ring
[i
] = (void *)(card
->evtbd_ring_vbase
+
525 (sizeof(*desc
) * i
));
526 desc
= card
->evtbd_ring
[i
];
527 desc
->paddr
= buf_pa
;
528 desc
->len
= (u16
)skb
->len
;
535 /* This function cleans up TX buffer rings. If any of the buffer list has valid
536 * SKB address, associated SKB is freed.
538 static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter
*adapter
)
540 struct pcie_service_card
*card
= adapter
->card
;
541 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
543 struct mwifiex_pcie_buf_desc
*desc
;
544 struct mwifiex_pfu_buf_desc
*desc2
;
547 for (i
= 0; i
< MWIFIEX_MAX_TXRX_BD
; i
++) {
548 if (reg
->pfu_enabled
) {
549 desc2
= card
->txbd_ring
[i
];
550 if (card
->tx_buf_list
[i
]) {
551 skb
= card
->tx_buf_list
[i
];
552 pci_unmap_single(card
->dev
, desc2
->paddr
,
553 skb
->len
, PCI_DMA_TODEVICE
);
554 dev_kfree_skb_any(skb
);
556 memset(desc2
, 0, sizeof(*desc2
));
558 desc
= card
->txbd_ring
[i
];
559 if (card
->tx_buf_list
[i
]) {
560 skb
= card
->tx_buf_list
[i
];
561 pci_unmap_single(card
->dev
, desc
->paddr
,
562 skb
->len
, PCI_DMA_TODEVICE
);
563 dev_kfree_skb_any(skb
);
565 memset(desc
, 0, sizeof(*desc
));
567 card
->tx_buf_list
[i
] = NULL
;
573 /* This function cleans up RX buffer rings. If any of the buffer list has valid
574 * SKB address, associated SKB is freed.
576 static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter
*adapter
)
578 struct pcie_service_card
*card
= adapter
->card
;
579 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
580 struct mwifiex_pcie_buf_desc
*desc
;
581 struct mwifiex_pfu_buf_desc
*desc2
;
585 for (i
= 0; i
< MWIFIEX_MAX_TXRX_BD
; i
++) {
586 if (reg
->pfu_enabled
) {
587 desc2
= card
->rxbd_ring
[i
];
588 if (card
->rx_buf_list
[i
]) {
589 skb
= card
->rx_buf_list
[i
];
590 pci_unmap_single(card
->dev
, desc2
->paddr
,
591 skb
->len
, PCI_DMA_FROMDEVICE
);
592 dev_kfree_skb_any(skb
);
594 memset(desc2
, 0, sizeof(*desc2
));
596 desc
= card
->rxbd_ring
[i
];
597 if (card
->rx_buf_list
[i
]) {
598 skb
= card
->rx_buf_list
[i
];
599 pci_unmap_single(card
->dev
, desc
->paddr
,
600 skb
->len
, PCI_DMA_FROMDEVICE
);
601 dev_kfree_skb_any(skb
);
603 memset(desc
, 0, sizeof(*desc
));
605 card
->rx_buf_list
[i
] = NULL
;
611 /* This function cleans up event buffer rings. If any of the buffer list has
612 * valid SKB address, associated SKB is freed.
614 static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter
*adapter
)
616 struct pcie_service_card
*card
= adapter
->card
;
617 struct mwifiex_evt_buf_desc
*desc
;
621 for (i
= 0; i
< MWIFIEX_MAX_EVT_BD
; i
++) {
622 desc
= card
->evtbd_ring
[i
];
623 if (card
->evt_buf_list
[i
]) {
624 skb
= card
->evt_buf_list
[i
];
625 pci_unmap_single(card
->dev
, desc
->paddr
, MAX_EVENT_SIZE
,
627 dev_kfree_skb_any(skb
);
629 card
->evt_buf_list
[i
] = NULL
;
630 memset(desc
, 0, sizeof(*desc
));
636 /* This function creates buffer descriptor ring for TX
638 static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter
*adapter
)
640 struct pcie_service_card
*card
= adapter
->card
;
641 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
644 * driver maintaines the write pointer and firmware maintaines the read
645 * pointer. The write pointer starts at 0 (zero) while the read pointer
646 * starts at zero with rollover bit set
648 card
->txbd_wrptr
= 0;
650 if (reg
->pfu_enabled
)
651 card
->txbd_rdptr
= 0;
653 card
->txbd_rdptr
|= reg
->tx_rollover_ind
;
655 /* allocate shared memory for the BD ring and divide the same in to
656 several descriptors */
657 if (reg
->pfu_enabled
)
658 card
->txbd_ring_size
= sizeof(struct mwifiex_pfu_buf_desc
) *
661 card
->txbd_ring_size
= sizeof(struct mwifiex_pcie_buf_desc
) *
664 dev_dbg(adapter
->dev
, "info: txbd_ring: Allocating %d bytes\n",
665 card
->txbd_ring_size
);
666 card
->txbd_ring_vbase
= pci_alloc_consistent(card
->dev
,
667 card
->txbd_ring_size
,
668 &card
->txbd_ring_pbase
);
669 if (!card
->txbd_ring_vbase
) {
670 dev_err(adapter
->dev
,
671 "allocate consistent memory (%d bytes) failed!\n",
672 card
->txbd_ring_size
);
675 dev_dbg(adapter
->dev
,
676 "info: txbd_ring - base: %p, pbase: %#x:%x, len: %x\n",
677 card
->txbd_ring_vbase
, (unsigned int)card
->txbd_ring_pbase
,
678 (u32
)((u64
)card
->txbd_ring_pbase
>> 32), card
->txbd_ring_size
);
680 return mwifiex_init_txq_ring(adapter
);
683 static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter
*adapter
)
685 struct pcie_service_card
*card
= adapter
->card
;
686 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
688 mwifiex_cleanup_txq_ring(adapter
);
690 if (card
->txbd_ring_vbase
)
691 pci_free_consistent(card
->dev
, card
->txbd_ring_size
,
692 card
->txbd_ring_vbase
,
693 card
->txbd_ring_pbase
);
694 card
->txbd_ring_size
= 0;
695 card
->txbd_wrptr
= 0;
696 card
->txbd_rdptr
= 0 | reg
->tx_rollover_ind
;
697 card
->txbd_ring_vbase
= NULL
;
698 card
->txbd_ring_pbase
= 0;
704 * This function creates buffer descriptor ring for RX
706 static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter
*adapter
)
708 struct pcie_service_card
*card
= adapter
->card
;
709 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
712 * driver maintaines the read pointer and firmware maintaines the write
713 * pointer. The write pointer starts at 0 (zero) while the read pointer
714 * starts at zero with rollover bit set
716 card
->rxbd_wrptr
= 0;
717 card
->rxbd_rdptr
= reg
->rx_rollover_ind
;
719 if (reg
->pfu_enabled
)
720 card
->rxbd_ring_size
= sizeof(struct mwifiex_pfu_buf_desc
) *
723 card
->rxbd_ring_size
= sizeof(struct mwifiex_pcie_buf_desc
) *
726 dev_dbg(adapter
->dev
, "info: rxbd_ring: Allocating %d bytes\n",
727 card
->rxbd_ring_size
);
728 card
->rxbd_ring_vbase
= pci_alloc_consistent(card
->dev
,
729 card
->rxbd_ring_size
,
730 &card
->rxbd_ring_pbase
);
731 if (!card
->rxbd_ring_vbase
) {
732 dev_err(adapter
->dev
,
733 "allocate consistent memory (%d bytes) failed!\n",
734 card
->rxbd_ring_size
);
738 dev_dbg(adapter
->dev
,
739 "info: rxbd_ring - base: %p, pbase: %#x:%x, len: %#x\n",
740 card
->rxbd_ring_vbase
, (u32
)card
->rxbd_ring_pbase
,
741 (u32
)((u64
)card
->rxbd_ring_pbase
>> 32),
742 card
->rxbd_ring_size
);
744 return mwifiex_init_rxq_ring(adapter
);
748 * This function deletes Buffer descriptor ring for RX
750 static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter
*adapter
)
752 struct pcie_service_card
*card
= adapter
->card
;
753 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
755 mwifiex_cleanup_rxq_ring(adapter
);
757 if (card
->rxbd_ring_vbase
)
758 pci_free_consistent(card
->dev
, card
->rxbd_ring_size
,
759 card
->rxbd_ring_vbase
,
760 card
->rxbd_ring_pbase
);
761 card
->rxbd_ring_size
= 0;
762 card
->rxbd_wrptr
= 0;
763 card
->rxbd_rdptr
= 0 | reg
->rx_rollover_ind
;
764 card
->rxbd_ring_vbase
= NULL
;
765 card
->rxbd_ring_pbase
= 0;
771 * This function creates buffer descriptor ring for Events
773 static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter
*adapter
)
775 struct pcie_service_card
*card
= adapter
->card
;
776 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
779 * driver maintaines the read pointer and firmware maintaines the write
780 * pointer. The write pointer starts at 0 (zero) while the read pointer
781 * starts at zero with rollover bit set
783 card
->evtbd_wrptr
= 0;
784 card
->evtbd_rdptr
= reg
->evt_rollover_ind
;
786 card
->evtbd_ring_size
= sizeof(struct mwifiex_evt_buf_desc
) *
789 dev_dbg(adapter
->dev
, "info: evtbd_ring: Allocating %d bytes\n",
790 card
->evtbd_ring_size
);
791 card
->evtbd_ring_vbase
= pci_alloc_consistent(card
->dev
,
792 card
->evtbd_ring_size
,
793 &card
->evtbd_ring_pbase
);
794 if (!card
->evtbd_ring_vbase
) {
795 dev_err(adapter
->dev
,
796 "allocate consistent memory (%d bytes) failed!\n",
797 card
->evtbd_ring_size
);
801 dev_dbg(adapter
->dev
,
802 "info: CMDRSP/EVT bd_ring - base: %p pbase: %#x:%x len: %#x\n",
803 card
->evtbd_ring_vbase
, (u32
)card
->evtbd_ring_pbase
,
804 (u32
)((u64
)card
->evtbd_ring_pbase
>> 32),
805 card
->evtbd_ring_size
);
807 return mwifiex_pcie_init_evt_ring(adapter
);
811 * This function deletes Buffer descriptor ring for Events
813 static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter
*adapter
)
815 struct pcie_service_card
*card
= adapter
->card
;
816 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
818 mwifiex_cleanup_evt_ring(adapter
);
820 if (card
->evtbd_ring_vbase
)
821 pci_free_consistent(card
->dev
, card
->evtbd_ring_size
,
822 card
->evtbd_ring_vbase
,
823 card
->evtbd_ring_pbase
);
824 card
->evtbd_wrptr
= 0;
825 card
->evtbd_rdptr
= 0 | reg
->evt_rollover_ind
;
826 card
->evtbd_ring_size
= 0;
827 card
->evtbd_ring_vbase
= NULL
;
828 card
->evtbd_ring_pbase
= 0;
834 * This function allocates a buffer for CMDRSP
836 static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter
*adapter
)
838 struct pcie_service_card
*card
= adapter
->card
;
841 /* Allocate memory for receiving command response data */
842 skb
= dev_alloc_skb(MWIFIEX_UPLD_SIZE
);
844 dev_err(adapter
->dev
,
845 "Unable to allocate skb for command response data.\n");
848 skb_put(skb
, MWIFIEX_UPLD_SIZE
);
849 if (mwifiex_map_pci_memory(adapter
, skb
, MWIFIEX_UPLD_SIZE
,
853 card
->cmdrsp_buf
= skb
;
859 * This function deletes a buffer for CMDRSP
861 static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter
*adapter
)
863 struct pcie_service_card
*card
;
869 card
= adapter
->card
;
871 if (card
&& card
->cmdrsp_buf
) {
872 MWIFIEX_SKB_PACB(card
->cmdrsp_buf
, &buf_pa
);
873 pci_unmap_single(card
->dev
, buf_pa
, MWIFIEX_UPLD_SIZE
,
875 dev_kfree_skb_any(card
->cmdrsp_buf
);
878 if (card
&& card
->cmd_buf
) {
879 MWIFIEX_SKB_PACB(card
->cmd_buf
, &buf_pa
);
880 pci_unmap_single(card
->dev
, buf_pa
, card
->cmd_buf
->len
,
887 * This function allocates a buffer for sleep cookie
889 static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter
*adapter
)
891 struct pcie_service_card
*card
= adapter
->card
;
893 card
->sleep_cookie_vbase
= pci_alloc_consistent(card
->dev
, sizeof(u32
),
894 &card
->sleep_cookie_pbase
);
895 if (!card
->sleep_cookie_vbase
) {
896 dev_err(adapter
->dev
, "pci_alloc_consistent failed!\n");
899 /* Init val of Sleep Cookie */
900 *(u32
*)card
->sleep_cookie_vbase
= FW_AWAKE_COOKIE
;
902 dev_dbg(adapter
->dev
, "alloc_scook: sleep cookie=0x%x\n",
903 *((u32
*)card
->sleep_cookie_vbase
));
909 * This function deletes buffer for sleep cookie
911 static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter
*adapter
)
913 struct pcie_service_card
*card
;
918 card
= adapter
->card
;
920 if (card
&& card
->sleep_cookie_vbase
) {
921 pci_free_consistent(card
->dev
, sizeof(u32
),
922 card
->sleep_cookie_vbase
,
923 card
->sleep_cookie_pbase
);
924 card
->sleep_cookie_vbase
= NULL
;
930 /* This function flushes the TX buffer descriptor ring
931 * This function defined as handler is also called while cleaning TXRX
932 * during disconnect/ bss stop.
934 static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter
*adapter
)
936 struct pcie_service_card
*card
= adapter
->card
;
938 if (!mwifiex_pcie_txbd_empty(card
, card
->txbd_rdptr
)) {
939 card
->txbd_flush
= 1;
940 /* write pointer already set at last send
941 * send dnld-rdy intr again, wait for completion.
943 if (mwifiex_write_reg(adapter
, PCIE_CPU_INT_EVENT
,
944 CPU_INTR_DNLD_RDY
)) {
945 dev_err(adapter
->dev
,
946 "failed to assert dnld-rdy interrupt.\n");
954 * This function unmaps and frees downloaded data buffer
956 static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter
*adapter
)
960 u32 wrdoneidx
, rdptr
, num_tx_buffs
, unmap_count
= 0;
961 struct mwifiex_pcie_buf_desc
*desc
;
962 struct mwifiex_pfu_buf_desc
*desc2
;
963 struct pcie_service_card
*card
= adapter
->card
;
964 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
966 if (!mwifiex_pcie_ok_to_access_hw(adapter
))
967 mwifiex_pm_wakeup_card(adapter
);
969 /* Read the TX ring read pointer set by firmware */
970 if (mwifiex_read_reg(adapter
, reg
->tx_rdptr
, &rdptr
)) {
971 dev_err(adapter
->dev
,
972 "SEND COMP: failed to read reg->tx_rdptr\n");
976 dev_dbg(adapter
->dev
, "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n",
977 card
->txbd_rdptr
, rdptr
);
979 num_tx_buffs
= MWIFIEX_MAX_TXRX_BD
<< reg
->tx_start_ptr
;
980 /* free from previous txbd_rdptr to current txbd_rdptr */
981 while (((card
->txbd_rdptr
& reg
->tx_mask
) !=
982 (rdptr
& reg
->tx_mask
)) ||
983 ((card
->txbd_rdptr
& reg
->tx_rollover_ind
) !=
984 (rdptr
& reg
->tx_rollover_ind
))) {
985 wrdoneidx
= (card
->txbd_rdptr
& reg
->tx_mask
) >>
988 skb
= card
->tx_buf_list
[wrdoneidx
];
990 dev_dbg(adapter
->dev
,
991 "SEND COMP: Detach skb %p at txbd_rdidx=%d\n",
993 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
994 pci_unmap_single(card
->dev
, buf_pa
, skb
->len
,
999 if (card
->txbd_flush
)
1000 mwifiex_write_data_complete(adapter
, skb
, 0,
1003 mwifiex_write_data_complete(adapter
, skb
, 0, 0);
1006 card
->tx_buf_list
[wrdoneidx
] = NULL
;
1008 if (reg
->pfu_enabled
) {
1009 desc2
= (void *)card
->txbd_ring
[wrdoneidx
];
1010 memset(desc2
, 0, sizeof(*desc2
));
1012 desc
= card
->txbd_ring
[wrdoneidx
];
1013 memset(desc
, 0, sizeof(*desc
));
1015 switch (card
->dev
->device
) {
1016 case PCIE_DEVICE_ID_MARVELL_88W8766P
:
1019 case PCIE_DEVICE_ID_MARVELL_88W8897
:
1020 card
->txbd_rdptr
+= reg
->ring_tx_start_ptr
;
1025 if ((card
->txbd_rdptr
& reg
->tx_mask
) == num_tx_buffs
)
1026 card
->txbd_rdptr
= ((card
->txbd_rdptr
&
1027 reg
->tx_rollover_ind
) ^
1028 reg
->tx_rollover_ind
);
1032 adapter
->data_sent
= false;
1034 if (card
->txbd_flush
) {
1035 if (mwifiex_pcie_txbd_empty(card
, card
->txbd_rdptr
))
1036 card
->txbd_flush
= 0;
1038 mwifiex_clean_pcie_ring_buf(adapter
);
1044 /* This function sends data buffer to device. First 4 bytes of payload
1045 * are filled with payload length and payload type. Then this payload
1046 * is mapped to PCI device memory. Tx ring pointers are advanced accordingly.
1047 * Download ready interrupt to FW is deffered if Tx ring is not full and
1048 * additional payload can be accomodated.
1051 mwifiex_pcie_send_data(struct mwifiex_adapter
*adapter
, struct sk_buff
*skb
,
1052 struct mwifiex_tx_param
*tx_param
)
1054 struct pcie_service_card
*card
= adapter
->card
;
1055 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1056 u32 wrindx
, num_tx_buffs
, rx_val
;
1059 struct mwifiex_pcie_buf_desc
*desc
= NULL
;
1060 struct mwifiex_pfu_buf_desc
*desc2
= NULL
;
1063 if (!(skb
->data
&& skb
->len
)) {
1064 dev_err(adapter
->dev
, "%s(): invalid parameter <%p, %#x>\n",
1065 __func__
, skb
->data
, skb
->len
);
1069 if (!mwifiex_pcie_ok_to_access_hw(adapter
))
1070 mwifiex_pm_wakeup_card(adapter
);
1072 num_tx_buffs
= MWIFIEX_MAX_TXRX_BD
<< reg
->tx_start_ptr
;
1073 dev_dbg(adapter
->dev
, "info: SEND DATA: <Rd: %#x, Wr: %#x>\n",
1074 card
->txbd_rdptr
, card
->txbd_wrptr
);
1075 if (mwifiex_pcie_txbd_not_full(card
)) {
1078 adapter
->data_sent
= true;
1079 payload
= skb
->data
;
1080 tmp
= (__le16
*)&payload
[0];
1081 *tmp
= cpu_to_le16((u16
)skb
->len
);
1082 tmp
= (__le16
*)&payload
[2];
1083 *tmp
= cpu_to_le16(MWIFIEX_TYPE_DATA
);
1085 if (mwifiex_map_pci_memory(adapter
, skb
, skb
->len
,
1089 wrindx
= (card
->txbd_wrptr
& reg
->tx_mask
) >> reg
->tx_start_ptr
;
1090 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1091 card
->tx_buf_list
[wrindx
] = skb
;
1093 if (reg
->pfu_enabled
) {
1094 desc2
= (void *)card
->txbd_ring
[wrindx
];
1095 desc2
->paddr
= buf_pa
;
1096 desc2
->len
= (u16
)skb
->len
;
1097 desc2
->frag_len
= (u16
)skb
->len
;
1099 desc2
->flags
= MWIFIEX_BD_FLAG_FIRST_DESC
|
1100 MWIFIEX_BD_FLAG_LAST_DESC
;
1102 desc
= card
->txbd_ring
[wrindx
];
1103 desc
->paddr
= buf_pa
;
1104 desc
->len
= (u16
)skb
->len
;
1105 desc
->flags
= MWIFIEX_BD_FLAG_FIRST_DESC
|
1106 MWIFIEX_BD_FLAG_LAST_DESC
;
1109 switch (card
->dev
->device
) {
1110 case PCIE_DEVICE_ID_MARVELL_88W8766P
:
1113 case PCIE_DEVICE_ID_MARVELL_88W8897
:
1114 card
->txbd_wrptr
+= reg
->ring_tx_start_ptr
;
1118 if ((card
->txbd_wrptr
& reg
->tx_mask
) == num_tx_buffs
)
1119 card
->txbd_wrptr
= ((card
->txbd_wrptr
&
1120 reg
->tx_rollover_ind
) ^
1121 reg
->tx_rollover_ind
);
1123 rx_val
= card
->rxbd_rdptr
& reg
->rx_wrap_mask
;
1124 /* Write the TX ring write pointer in to reg->tx_wrptr */
1125 if (mwifiex_write_reg(adapter
, reg
->tx_wrptr
,
1126 card
->txbd_wrptr
| rx_val
)) {
1127 dev_err(adapter
->dev
,
1128 "SEND DATA: failed to write reg->tx_wrptr\n");
1132 if ((mwifiex_pcie_txbd_not_full(card
)) &&
1133 tx_param
->next_pkt_len
) {
1134 /* have more packets and TxBD still can hold more */
1135 dev_dbg(adapter
->dev
,
1136 "SEND DATA: delay dnld-rdy interrupt.\n");
1137 adapter
->data_sent
= false;
1139 /* Send the TX ready interrupt */
1140 if (mwifiex_write_reg(adapter
, PCIE_CPU_INT_EVENT
,
1141 CPU_INTR_DNLD_RDY
)) {
1142 dev_err(adapter
->dev
,
1143 "SEND DATA: failed to assert dnld-rdy interrupt.\n");
1148 dev_dbg(adapter
->dev
, "info: SEND DATA: Updated <Rd: %#x, Wr: "
1149 "%#x> and sent packet to firmware successfully\n",
1150 card
->txbd_rdptr
, card
->txbd_wrptr
);
1152 dev_dbg(adapter
->dev
,
1153 "info: TX Ring full, can't send packets to fw\n");
1154 adapter
->data_sent
= true;
1155 /* Send the TX ready interrupt */
1156 if (mwifiex_write_reg(adapter
, PCIE_CPU_INT_EVENT
,
1158 dev_err(adapter
->dev
,
1159 "SEND DATA: failed to assert door-bell intr\n");
1163 return -EINPROGRESS
;
1165 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1166 pci_unmap_single(card
->dev
, buf_pa
, skb
->len
, PCI_DMA_TODEVICE
);
1167 card
->tx_buf_list
[wrindx
] = NULL
;
1168 if (reg
->pfu_enabled
)
1169 memset(desc2
, 0, sizeof(*desc2
));
1171 memset(desc
, 0, sizeof(*desc
));
1177 * This function handles received buffer ring and
1178 * dispatches packets to upper
1180 static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter
*adapter
)
1182 struct pcie_service_card
*card
= adapter
->card
;
1183 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1184 u32 wrptr
, rd_index
, tx_val
;
1187 struct sk_buff
*skb_tmp
= NULL
;
1188 struct mwifiex_pcie_buf_desc
*desc
;
1189 struct mwifiex_pfu_buf_desc
*desc2
;
1191 if (!mwifiex_pcie_ok_to_access_hw(adapter
))
1192 mwifiex_pm_wakeup_card(adapter
);
1194 /* Read the RX ring Write pointer set by firmware */
1195 if (mwifiex_read_reg(adapter
, reg
->rx_wrptr
, &wrptr
)) {
1196 dev_err(adapter
->dev
,
1197 "RECV DATA: failed to read reg->rx_wrptr\n");
1201 card
->rxbd_wrptr
= wrptr
;
1203 while (((wrptr
& reg
->rx_mask
) !=
1204 (card
->rxbd_rdptr
& reg
->rx_mask
)) ||
1205 ((wrptr
& reg
->rx_rollover_ind
) ==
1206 (card
->rxbd_rdptr
& reg
->rx_rollover_ind
))) {
1207 struct sk_buff
*skb_data
;
1211 rd_index
= card
->rxbd_rdptr
& reg
->rx_mask
;
1212 skb_data
= card
->rx_buf_list
[rd_index
];
1214 MWIFIEX_SKB_PACB(skb_data
, &buf_pa
);
1215 pci_unmap_single(card
->dev
, buf_pa
, MWIFIEX_RX_DATA_BUF_SIZE
,
1216 PCI_DMA_FROMDEVICE
);
1217 card
->rx_buf_list
[rd_index
] = NULL
;
1219 /* Get data length from interface header -
1220 * first 2 bytes for len, next 2 bytes is for type
1222 pkt_len
= *((__le16
*)skb_data
->data
);
1223 rx_len
= le16_to_cpu(pkt_len
);
1224 skb_put(skb_data
, rx_len
);
1225 dev_dbg(adapter
->dev
,
1226 "info: RECV DATA: Rd=%#x, Wr=%#x, Len=%d\n",
1227 card
->rxbd_rdptr
, wrptr
, rx_len
);
1228 skb_pull(skb_data
, INTF_HEADER_LEN
);
1229 mwifiex_handle_rx_packet(adapter
, skb_data
);
1231 skb_tmp
= dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE
);
1233 dev_err(adapter
->dev
,
1234 "Unable to allocate skb.\n");
1238 if (mwifiex_map_pci_memory(adapter
, skb_tmp
,
1239 MWIFIEX_RX_DATA_BUF_SIZE
,
1240 PCI_DMA_FROMDEVICE
))
1243 MWIFIEX_SKB_PACB(skb_tmp
, &buf_pa
);
1245 dev_dbg(adapter
->dev
,
1246 "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n",
1248 card
->rx_buf_list
[rd_index
] = skb_tmp
;
1250 if (reg
->pfu_enabled
) {
1251 desc2
= (void *)card
->rxbd_ring
[rd_index
];
1252 desc2
->paddr
= buf_pa
;
1253 desc2
->len
= skb_tmp
->len
;
1254 desc2
->frag_len
= skb_tmp
->len
;
1256 desc2
->flags
= reg
->ring_flag_sop
| reg
->ring_flag_eop
;
1258 desc
= card
->rxbd_ring
[rd_index
];
1259 desc
->paddr
= buf_pa
;
1260 desc
->len
= skb_tmp
->len
;
1264 if ((++card
->rxbd_rdptr
& reg
->rx_mask
) ==
1265 MWIFIEX_MAX_TXRX_BD
) {
1266 card
->rxbd_rdptr
= ((card
->rxbd_rdptr
&
1267 reg
->rx_rollover_ind
) ^
1268 reg
->rx_rollover_ind
);
1270 dev_dbg(adapter
->dev
, "info: RECV DATA: <Rd: %#x, Wr: %#x>\n",
1271 card
->rxbd_rdptr
, wrptr
);
1273 tx_val
= card
->txbd_wrptr
& reg
->tx_wrap_mask
;
1274 /* Write the RX ring read pointer in to reg->rx_rdptr */
1275 if (mwifiex_write_reg(adapter
, reg
->rx_rdptr
,
1276 card
->rxbd_rdptr
| tx_val
)) {
1277 dev_err(adapter
->dev
,
1278 "RECV DATA: failed to write reg->rx_rdptr\n");
1283 /* Read the RX ring Write pointer set by firmware */
1284 if (mwifiex_read_reg(adapter
, reg
->rx_wrptr
, &wrptr
)) {
1285 dev_err(adapter
->dev
,
1286 "RECV DATA: failed to read reg->rx_wrptr\n");
1290 dev_dbg(adapter
->dev
,
1291 "info: RECV DATA: Rcvd packet from fw successfully\n");
1292 card
->rxbd_wrptr
= wrptr
;
1300 * This function downloads the boot command to device
1303 mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter
*adapter
, struct sk_buff
*skb
)
1306 struct pcie_service_card
*card
= adapter
->card
;
1307 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1309 if (!(skb
->data
&& skb
->len
)) {
1310 dev_err(adapter
->dev
,
1311 "Invalid parameter in %s <%p. len %d>\n",
1312 __func__
, skb
->data
, skb
->len
);
1316 if (mwifiex_map_pci_memory(adapter
, skb
, skb
->len
, PCI_DMA_TODEVICE
))
1319 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1321 /* Write the lower 32bits of the physical address to low command
1322 * address scratch register
1324 if (mwifiex_write_reg(adapter
, reg
->cmd_addr_lo
, (u32
)buf_pa
)) {
1325 dev_err(adapter
->dev
,
1326 "%s: failed to write download command to boot code.\n",
1328 pci_unmap_single(card
->dev
, buf_pa
, MWIFIEX_UPLD_SIZE
,
1333 /* Write the upper 32bits of the physical address to high command
1334 * address scratch register
1336 if (mwifiex_write_reg(adapter
, reg
->cmd_addr_hi
,
1337 (u32
)((u64
)buf_pa
>> 32))) {
1338 dev_err(adapter
->dev
,
1339 "%s: failed to write download command to boot code.\n",
1341 pci_unmap_single(card
->dev
, buf_pa
, MWIFIEX_UPLD_SIZE
,
1346 /* Write the command length to cmd_size scratch register */
1347 if (mwifiex_write_reg(adapter
, reg
->cmd_size
, skb
->len
)) {
1348 dev_err(adapter
->dev
,
1349 "%s: failed to write command len to cmd_size scratch reg\n",
1351 pci_unmap_single(card
->dev
, buf_pa
, MWIFIEX_UPLD_SIZE
,
1356 /* Ring the door bell */
1357 if (mwifiex_write_reg(adapter
, PCIE_CPU_INT_EVENT
,
1358 CPU_INTR_DOOR_BELL
)) {
1359 dev_err(adapter
->dev
,
1360 "%s: failed to assert door-bell intr\n", __func__
);
1361 pci_unmap_single(card
->dev
, buf_pa
,
1362 MWIFIEX_UPLD_SIZE
, PCI_DMA_TODEVICE
);
1369 /* This function init rx port in firmware which in turn enables to receive data
1370 * from device before transmitting any packet.
1372 static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter
*adapter
)
1374 struct pcie_service_card
*card
= adapter
->card
;
1375 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1376 int tx_wrap
= card
->txbd_wrptr
& reg
->tx_wrap_mask
;
1378 /* Write the RX ring read pointer in to reg->rx_rdptr */
1379 if (mwifiex_write_reg(adapter
, reg
->rx_rdptr
, card
->rxbd_rdptr
|
1381 dev_err(adapter
->dev
,
1382 "RECV DATA: failed to write reg->rx_rdptr\n");
1388 /* This function downloads commands to the device
1391 mwifiex_pcie_send_cmd(struct mwifiex_adapter
*adapter
, struct sk_buff
*skb
)
1393 struct pcie_service_card
*card
= adapter
->card
;
1394 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1396 dma_addr_t cmd_buf_pa
, cmdrsp_buf_pa
;
1397 u8
*payload
= (u8
*)skb
->data
;
1399 if (!(skb
->data
&& skb
->len
)) {
1400 dev_err(adapter
->dev
, "Invalid parameter in %s <%p, %#x>\n",
1401 __func__
, skb
->data
, skb
->len
);
1405 /* Make sure a command response buffer is available */
1406 if (!card
->cmdrsp_buf
) {
1407 dev_err(adapter
->dev
,
1408 "No response buffer available, send command failed\n");
1412 if (!mwifiex_pcie_ok_to_access_hw(adapter
))
1413 mwifiex_pm_wakeup_card(adapter
);
1415 adapter
->cmd_sent
= true;
1417 *(__le16
*)&payload
[0] = cpu_to_le16((u16
)skb
->len
);
1418 *(__le16
*)&payload
[2] = cpu_to_le16(MWIFIEX_TYPE_CMD
);
1420 if (mwifiex_map_pci_memory(adapter
, skb
, skb
->len
, PCI_DMA_TODEVICE
))
1423 card
->cmd_buf
= skb
;
1425 /* To send a command, the driver will:
1426 1. Write the 64bit physical address of the data buffer to
1427 cmd response address low + cmd response address high
1428 2. Ring the door bell (i.e. set the door bell interrupt)
1430 In response to door bell interrupt, the firmware will perform
1431 the DMA of the command packet (first header to obtain the total
1432 length and then rest of the command).
1435 if (card
->cmdrsp_buf
) {
1436 MWIFIEX_SKB_PACB(card
->cmdrsp_buf
, &cmdrsp_buf_pa
);
1437 /* Write the lower 32bits of the cmdrsp buffer physical
1439 if (mwifiex_write_reg(adapter
, reg
->cmdrsp_addr_lo
,
1440 (u32
)cmdrsp_buf_pa
)) {
1441 dev_err(adapter
->dev
,
1442 "Failed to write download cmd to boot code.\n");
1446 /* Write the upper 32bits of the cmdrsp buffer physical
1448 if (mwifiex_write_reg(adapter
, reg
->cmdrsp_addr_hi
,
1449 (u32
)((u64
)cmdrsp_buf_pa
>> 32))) {
1450 dev_err(adapter
->dev
,
1451 "Failed to write download cmd to boot code.\n");
1457 MWIFIEX_SKB_PACB(card
->cmd_buf
, &cmd_buf_pa
);
1458 /* Write the lower 32bits of the physical address to reg->cmd_addr_lo */
1459 if (mwifiex_write_reg(adapter
, reg
->cmd_addr_lo
,
1461 dev_err(adapter
->dev
,
1462 "Failed to write download cmd to boot code.\n");
1466 /* Write the upper 32bits of the physical address to reg->cmd_addr_hi */
1467 if (mwifiex_write_reg(adapter
, reg
->cmd_addr_hi
,
1468 (u32
)((u64
)cmd_buf_pa
>> 32))) {
1469 dev_err(adapter
->dev
,
1470 "Failed to write download cmd to boot code.\n");
1475 /* Write the command length to reg->cmd_size */
1476 if (mwifiex_write_reg(adapter
, reg
->cmd_size
,
1477 card
->cmd_buf
->len
)) {
1478 dev_err(adapter
->dev
,
1479 "Failed to write cmd len to reg->cmd_size\n");
1484 /* Ring the door bell */
1485 if (mwifiex_write_reg(adapter
, PCIE_CPU_INT_EVENT
,
1486 CPU_INTR_DOOR_BELL
)) {
1487 dev_err(adapter
->dev
,
1488 "Failed to assert door-bell intr\n");
1495 adapter
->cmd_sent
= false;
1501 * This function handles command complete interrupt
1503 static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter
*adapter
)
1505 struct pcie_service_card
*card
= adapter
->card
;
1506 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1507 struct sk_buff
*skb
= card
->cmdrsp_buf
;
1513 dev_dbg(adapter
->dev
, "info: Rx CMD Response\n");
1515 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1516 pci_unmap_single(card
->dev
, buf_pa
, MWIFIEX_UPLD_SIZE
,
1517 PCI_DMA_FROMDEVICE
);
1519 pkt_len
= *((__le16
*)skb
->data
);
1520 rx_len
= le16_to_cpu(pkt_len
);
1521 skb_trim(skb
, rx_len
);
1522 skb_pull(skb
, INTF_HEADER_LEN
);
1524 if (!adapter
->curr_cmd
) {
1525 if (adapter
->ps_state
== PS_STATE_SLEEP_CFM
) {
1526 mwifiex_process_sleep_confirm_resp(adapter
, skb
->data
,
1528 while (reg
->sleep_cookie
&& (count
++ < 10) &&
1529 mwifiex_pcie_ok_to_access_hw(adapter
))
1530 usleep_range(50, 60);
1532 dev_err(adapter
->dev
,
1533 "There is no command but got cmdrsp\n");
1535 memcpy(adapter
->upld_buf
, skb
->data
,
1536 min_t(u32
, MWIFIEX_SIZE_OF_CMD_BUFFER
, skb
->len
));
1537 skb_push(skb
, INTF_HEADER_LEN
);
1538 if (mwifiex_map_pci_memory(adapter
, skb
, MWIFIEX_UPLD_SIZE
,
1539 PCI_DMA_FROMDEVICE
))
1542 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1543 } else if (mwifiex_pcie_ok_to_access_hw(adapter
)) {
1544 adapter
->curr_cmd
->resp_skb
= skb
;
1545 adapter
->cmd_resp_received
= true;
1546 /* Take the pointer and set it to CMD node and will
1547 return in the response complete callback */
1548 card
->cmdrsp_buf
= NULL
;
1550 /* Clear the cmd-rsp buffer address in scratch registers. This
1551 will prevent firmware from writing to the same response
1553 if (mwifiex_write_reg(adapter
, reg
->cmdrsp_addr_lo
, 0)) {
1554 dev_err(adapter
->dev
,
1555 "cmd_done: failed to clear cmd_rsp_addr_lo\n");
1558 /* Write the upper 32bits of the cmdrsp buffer physical
1560 if (mwifiex_write_reg(adapter
, reg
->cmdrsp_addr_hi
, 0)) {
1561 dev_err(adapter
->dev
,
1562 "cmd_done: failed to clear cmd_rsp_addr_hi\n");
1571 * Command Response processing complete handler
1573 static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter
*adapter
,
1574 struct sk_buff
*skb
)
1576 struct pcie_service_card
*card
= adapter
->card
;
1578 struct sk_buff
*skb_tmp
;
1581 card
->cmdrsp_buf
= skb
;
1582 skb_push(card
->cmdrsp_buf
, INTF_HEADER_LEN
);
1583 if (mwifiex_map_pci_memory(adapter
, skb
, MWIFIEX_UPLD_SIZE
,
1584 PCI_DMA_FROMDEVICE
))
1588 skb_tmp
= card
->cmd_buf
;
1590 MWIFIEX_SKB_PACB(skb_tmp
, &buf_pa
);
1591 pci_unmap_single(card
->dev
, buf_pa
, skb_tmp
->len
,
1592 PCI_DMA_FROMDEVICE
);
1593 card
->cmd_buf
= NULL
;
1600 * This function handles firmware event ready interrupt
1602 static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter
*adapter
)
1604 struct pcie_service_card
*card
= adapter
->card
;
1605 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1606 u32 rdptr
= card
->evtbd_rdptr
& MWIFIEX_EVTBD_MASK
;
1609 struct mwifiex_evt_buf_desc
*desc
;
1611 if (!mwifiex_pcie_ok_to_access_hw(adapter
))
1612 mwifiex_pm_wakeup_card(adapter
);
1614 if (adapter
->event_received
) {
1615 dev_dbg(adapter
->dev
, "info: Event being processed, "
1616 "do not process this interrupt just yet\n");
1620 if (rdptr
>= MWIFIEX_MAX_EVT_BD
) {
1621 dev_dbg(adapter
->dev
, "info: Invalid read pointer...\n");
1625 /* Read the event ring write pointer set by firmware */
1626 if (mwifiex_read_reg(adapter
, reg
->evt_wrptr
, &wrptr
)) {
1627 dev_err(adapter
->dev
,
1628 "EventReady: failed to read reg->evt_wrptr\n");
1632 dev_dbg(adapter
->dev
, "info: EventReady: Initial <Rd: 0x%x, Wr: 0x%x>",
1633 card
->evtbd_rdptr
, wrptr
);
1634 if (((wrptr
& MWIFIEX_EVTBD_MASK
) != (card
->evtbd_rdptr
1635 & MWIFIEX_EVTBD_MASK
)) ||
1636 ((wrptr
& reg
->evt_rollover_ind
) ==
1637 (card
->evtbd_rdptr
& reg
->evt_rollover_ind
))) {
1638 struct sk_buff
*skb_cmd
;
1639 __le16 data_len
= 0;
1642 dev_dbg(adapter
->dev
, "info: Read Index: %d\n", rdptr
);
1643 skb_cmd
= card
->evt_buf_list
[rdptr
];
1644 MWIFIEX_SKB_PACB(skb_cmd
, &buf_pa
);
1645 pci_unmap_single(card
->dev
, buf_pa
, MAX_EVENT_SIZE
,
1646 PCI_DMA_FROMDEVICE
);
1648 /* Take the pointer and set it to event pointer in adapter
1649 and will return back after event handling callback */
1650 card
->evt_buf_list
[rdptr
] = NULL
;
1651 desc
= card
->evtbd_ring
[rdptr
];
1652 memset(desc
, 0, sizeof(*desc
));
1654 event
= *(u32
*) &skb_cmd
->data
[INTF_HEADER_LEN
];
1655 adapter
->event_cause
= event
;
1656 /* The first 4bytes will be the event transfer header
1657 len is 2 bytes followed by type which is 2 bytes */
1658 memcpy(&data_len
, skb_cmd
->data
, sizeof(__le16
));
1659 evt_len
= le16_to_cpu(data_len
);
1661 skb_pull(skb_cmd
, INTF_HEADER_LEN
);
1662 dev_dbg(adapter
->dev
, "info: Event length: %d\n", evt_len
);
1664 if ((evt_len
> 0) && (evt_len
< MAX_EVENT_SIZE
))
1665 memcpy(adapter
->event_body
, skb_cmd
->data
+
1666 MWIFIEX_EVENT_HEADER_LEN
, evt_len
-
1667 MWIFIEX_EVENT_HEADER_LEN
);
1669 adapter
->event_received
= true;
1670 adapter
->event_skb
= skb_cmd
;
1672 /* Do not update the event read pointer here, wait till the
1673 buffer is released. This is just to make things simpler,
1674 we need to find a better method of managing these buffers.
1682 * Event processing complete handler
1684 static int mwifiex_pcie_event_complete(struct mwifiex_adapter
*adapter
,
1685 struct sk_buff
*skb
)
1687 struct pcie_service_card
*card
= adapter
->card
;
1688 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1690 u32 rdptr
= card
->evtbd_rdptr
& MWIFIEX_EVTBD_MASK
;
1693 struct mwifiex_evt_buf_desc
*desc
;
1698 if (rdptr
>= MWIFIEX_MAX_EVT_BD
) {
1699 dev_err(adapter
->dev
, "event_complete: Invalid rdptr 0x%x\n",
1704 /* Read the event ring write pointer set by firmware */
1705 if (mwifiex_read_reg(adapter
, reg
->evt_wrptr
, &wrptr
)) {
1706 dev_err(adapter
->dev
,
1707 "event_complete: failed to read reg->evt_wrptr\n");
1711 if (!card
->evt_buf_list
[rdptr
]) {
1712 skb_push(skb
, INTF_HEADER_LEN
);
1713 if (mwifiex_map_pci_memory(adapter
, skb
,
1715 PCI_DMA_FROMDEVICE
))
1717 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1718 card
->evt_buf_list
[rdptr
] = skb
;
1719 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1720 desc
= card
->evtbd_ring
[rdptr
];
1721 desc
->paddr
= buf_pa
;
1722 desc
->len
= (u16
)skb
->len
;
1726 dev_dbg(adapter
->dev
,
1727 "info: ERROR: buf still valid at index %d, <%p, %p>\n",
1728 rdptr
, card
->evt_buf_list
[rdptr
], skb
);
1731 if ((++card
->evtbd_rdptr
& MWIFIEX_EVTBD_MASK
) == MWIFIEX_MAX_EVT_BD
) {
1732 card
->evtbd_rdptr
= ((card
->evtbd_rdptr
&
1733 reg
->evt_rollover_ind
) ^
1734 reg
->evt_rollover_ind
);
1737 dev_dbg(adapter
->dev
, "info: Updated <Rd: 0x%x, Wr: 0x%x>",
1738 card
->evtbd_rdptr
, wrptr
);
1740 /* Write the event ring read pointer in to reg->evt_rdptr */
1741 if (mwifiex_write_reg(adapter
, reg
->evt_rdptr
,
1742 card
->evtbd_rdptr
)) {
1743 dev_err(adapter
->dev
,
1744 "event_complete: failed to read reg->evt_rdptr\n");
1748 dev_dbg(adapter
->dev
, "info: Check Events Again\n");
1749 ret
= mwifiex_pcie_process_event_ready(adapter
);
1755 * This function downloads the firmware to the card.
1757 * Firmware is downloaded to the card in blocks. Every block download
1758 * is tested for CRC errors, and retried a number of times before
1759 * returning failure.
1761 static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter
*adapter
,
1762 struct mwifiex_fw_image
*fw
)
1765 u8
*firmware
= fw
->fw_buf
;
1766 u32 firmware_len
= fw
->fw_len
;
1768 struct sk_buff
*skb
;
1769 u32 txlen
, tx_blocks
= 0, tries
, len
;
1770 u32 block_retry_cnt
= 0;
1772 struct pcie_service_card
*card
= adapter
->card
;
1773 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1775 if (!firmware
|| !firmware_len
) {
1776 dev_err(adapter
->dev
,
1777 "No firmware image found! Terminating download\n");
1781 dev_dbg(adapter
->dev
, "info: Downloading FW image (%d bytes)\n",
1784 if (mwifiex_pcie_disable_host_int(adapter
)) {
1785 dev_err(adapter
->dev
,
1786 "%s: Disabling interrupts failed.\n", __func__
);
1790 skb
= dev_alloc_skb(MWIFIEX_UPLD_SIZE
);
1796 /* Perform firmware data transfer */
1801 if (offset
>= firmware_len
)
1804 for (tries
= 0; tries
< MAX_POLL_TRIES
; tries
++) {
1805 ret
= mwifiex_read_reg(adapter
, reg
->cmd_size
,
1808 dev_warn(adapter
->dev
,
1809 "Failed reading len from boot code\n");
1814 usleep_range(10, 20);
1819 } else if (len
> MWIFIEX_UPLD_SIZE
) {
1820 pr_err("FW download failure @ %d, invalid length %d\n",
1830 if (block_retry_cnt
> MAX_WRITE_IOMEM_RETRY
) {
1831 pr_err("FW download failure @ %d, over max "
1832 "retry count\n", offset
);
1836 dev_err(adapter
->dev
, "FW CRC error indicated by the "
1837 "helper: len = 0x%04X, txlen = %d\n",
1840 /* Setting this to 0 to resend from same offset */
1843 block_retry_cnt
= 0;
1844 /* Set blocksize to transfer - checking for
1846 if (firmware_len
- offset
< txlen
)
1847 txlen
= firmware_len
- offset
;
1849 dev_dbg(adapter
->dev
, ".");
1851 tx_blocks
= (txlen
+ card
->pcie
.blksz_fw_dl
- 1) /
1852 card
->pcie
.blksz_fw_dl
;
1854 /* Copy payload to buffer */
1855 memmove(skb
->data
, &firmware
[offset
], txlen
);
1858 skb_put(skb
, MWIFIEX_UPLD_SIZE
- skb
->len
);
1859 skb_trim(skb
, tx_blocks
* card
->pcie
.blksz_fw_dl
);
1861 /* Send the boot command to device */
1862 if (mwifiex_pcie_send_boot_cmd(adapter
, skb
)) {
1863 dev_err(adapter
->dev
,
1864 "Failed to send firmware download command\n");
1869 MWIFIEX_SKB_PACB(skb
, &buf_pa
);
1871 /* Wait for the command done interrupt */
1873 if (mwifiex_read_reg(adapter
, PCIE_CPU_INT_STATUS
,
1875 dev_err(adapter
->dev
, "%s: Failed to read "
1876 "interrupt status during fw dnld.\n",
1878 pci_unmap_single(card
->dev
, buf_pa
, skb
->len
,
1883 } while ((ireg_intr
& CPU_INTR_DOOR_BELL
) ==
1884 CPU_INTR_DOOR_BELL
);
1886 pci_unmap_single(card
->dev
, buf_pa
, skb
->len
,
1892 dev_dbg(adapter
->dev
, "info:\nFW download over, size %d bytes\n",
1898 dev_kfree_skb_any(skb
);
1903 * This function checks the firmware status in card.
1905 * The winner interface is also determined by this function.
1908 mwifiex_check_fw_status(struct mwifiex_adapter
*adapter
, u32 poll_num
)
1911 u32 firmware_stat
, winner_status
;
1912 struct pcie_service_card
*card
= adapter
->card
;
1913 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
1916 /* Mask spurios interrupts */
1917 if (mwifiex_write_reg(adapter
, PCIE_HOST_INT_STATUS_MASK
,
1919 dev_warn(adapter
->dev
, "Write register failed\n");
1923 dev_dbg(adapter
->dev
, "Setting driver ready signature\n");
1924 if (mwifiex_write_reg(adapter
, reg
->drv_rdy
,
1925 FIRMWARE_READY_PCIE
)) {
1926 dev_err(adapter
->dev
,
1927 "Failed to write driver ready signature\n");
1931 /* Wait for firmware initialization event */
1932 for (tries
= 0; tries
< poll_num
; tries
++) {
1933 if (mwifiex_read_reg(adapter
, reg
->fw_status
,
1940 if (firmware_stat
== FIRMWARE_READY_PCIE
) {
1950 if (mwifiex_read_reg(adapter
, reg
->fw_status
,
1953 else if (!winner_status
) {
1954 dev_err(adapter
->dev
, "PCI-E is the winner\n");
1955 adapter
->winner
= 1;
1957 dev_err(adapter
->dev
,
1958 "PCI-E is not the winner <%#x,%d>, exit dnld\n",
1959 ret
, adapter
->winner
);
1967 * This function reads the interrupt status from card.
1969 static void mwifiex_interrupt_status(struct mwifiex_adapter
*adapter
)
1972 unsigned long flags
;
1974 if (!mwifiex_pcie_ok_to_access_hw(adapter
))
1977 if (mwifiex_read_reg(adapter
, PCIE_HOST_INT_STATUS
, &pcie_ireg
)) {
1978 dev_warn(adapter
->dev
, "Read register failed\n");
1982 if ((pcie_ireg
!= 0xFFFFFFFF) && (pcie_ireg
)) {
1984 mwifiex_pcie_disable_host_int(adapter
);
1986 /* Clear the pending interrupts */
1987 if (mwifiex_write_reg(adapter
, PCIE_HOST_INT_STATUS
,
1989 dev_warn(adapter
->dev
, "Write register failed\n");
1992 spin_lock_irqsave(&adapter
->int_lock
, flags
);
1993 adapter
->int_status
|= pcie_ireg
;
1994 spin_unlock_irqrestore(&adapter
->int_lock
, flags
);
1996 if (pcie_ireg
& HOST_INTR_CMD_DONE
) {
1997 if ((adapter
->ps_state
== PS_STATE_SLEEP_CFM
) ||
1998 (adapter
->ps_state
== PS_STATE_SLEEP
)) {
1999 mwifiex_pcie_enable_host_int(adapter
);
2000 if (mwifiex_write_reg(adapter
,
2002 CPU_INTR_SLEEP_CFM_DONE
)
2004 dev_warn(adapter
->dev
,
2005 "Write register failed\n");
2010 } else if (!adapter
->pps_uapsd_mode
&&
2011 adapter
->ps_state
== PS_STATE_SLEEP
&&
2012 mwifiex_pcie_ok_to_access_hw(adapter
)) {
2013 /* Potentially for PCIe we could get other
2014 * interrupts like shared. Don't change power
2015 * state until cookie is set */
2016 adapter
->ps_state
= PS_STATE_AWAKE
;
2017 adapter
->pm_wakeup_fw_try
= false;
2023 * Interrupt handler for PCIe root port
2025 * This function reads the interrupt status from firmware and assigns
2026 * the main process in workqueue which will handle the interrupt.
2028 static irqreturn_t
mwifiex_pcie_interrupt(int irq
, void *context
)
2030 struct pci_dev
*pdev
= (struct pci_dev
*)context
;
2031 struct pcie_service_card
*card
;
2032 struct mwifiex_adapter
*adapter
;
2035 pr_debug("info: %s: pdev is NULL\n", (u8
*)pdev
);
2039 card
= pci_get_drvdata(pdev
);
2040 if (!card
|| !card
->adapter
) {
2041 pr_debug("info: %s: card=%p adapter=%p\n", __func__
, card
,
2042 card
? card
->adapter
: NULL
);
2045 adapter
= card
->adapter
;
2047 if (adapter
->surprise_removed
)
2050 mwifiex_interrupt_status(adapter
);
2051 queue_work(adapter
->workqueue
, &adapter
->main_work
);
2058 * This function checks the current interrupt status.
2060 * The following interrupts are checked and handled by this function -
2063 * - Command received
2064 * - Packets received
2067 * In case of Rx packets received, the packets are uploaded from card to
2068 * host and processed accordingly.
2070 static int mwifiex_process_int_status(struct mwifiex_adapter
*adapter
)
2074 unsigned long flags
;
2076 spin_lock_irqsave(&adapter
->int_lock
, flags
);
2077 /* Clear out unused interrupts */
2078 pcie_ireg
= adapter
->int_status
;
2079 adapter
->int_status
= 0;
2080 spin_unlock_irqrestore(&adapter
->int_lock
, flags
);
2082 while (pcie_ireg
& HOST_INTR_MASK
) {
2083 if (pcie_ireg
& HOST_INTR_DNLD_DONE
) {
2084 pcie_ireg
&= ~HOST_INTR_DNLD_DONE
;
2085 dev_dbg(adapter
->dev
, "info: TX DNLD Done\n");
2086 ret
= mwifiex_pcie_send_data_complete(adapter
);
2090 if (pcie_ireg
& HOST_INTR_UPLD_RDY
) {
2091 pcie_ireg
&= ~HOST_INTR_UPLD_RDY
;
2092 dev_dbg(adapter
->dev
, "info: Rx DATA\n");
2093 ret
= mwifiex_pcie_process_recv_data(adapter
);
2097 if (pcie_ireg
& HOST_INTR_EVENT_RDY
) {
2098 pcie_ireg
&= ~HOST_INTR_EVENT_RDY
;
2099 dev_dbg(adapter
->dev
, "info: Rx EVENT\n");
2100 ret
= mwifiex_pcie_process_event_ready(adapter
);
2105 if (pcie_ireg
& HOST_INTR_CMD_DONE
) {
2106 pcie_ireg
&= ~HOST_INTR_CMD_DONE
;
2107 if (adapter
->cmd_sent
) {
2108 dev_dbg(adapter
->dev
,
2109 "info: CMD sent Interrupt\n");
2110 adapter
->cmd_sent
= false;
2112 /* Handle command response */
2113 ret
= mwifiex_pcie_process_cmd_complete(adapter
);
2118 if (mwifiex_pcie_ok_to_access_hw(adapter
)) {
2119 if (mwifiex_read_reg(adapter
, PCIE_HOST_INT_STATUS
,
2121 dev_warn(adapter
->dev
,
2122 "Read register failed\n");
2126 if ((pcie_ireg
!= 0xFFFFFFFF) && (pcie_ireg
)) {
2127 if (mwifiex_write_reg(adapter
,
2128 PCIE_HOST_INT_STATUS
,
2130 dev_warn(adapter
->dev
,
2131 "Write register failed\n");
2138 dev_dbg(adapter
->dev
, "info: cmd_sent=%d data_sent=%d\n",
2139 adapter
->cmd_sent
, adapter
->data_sent
);
2140 if (adapter
->ps_state
!= PS_STATE_SLEEP
)
2141 mwifiex_pcie_enable_host_int(adapter
);
2147 * This function downloads data from driver to card.
2149 * Both commands and data packets are transferred to the card by this
2152 * This function adds the PCIE specific header to the front of the buffer
2153 * before transferring. The header contains the length of the packet and
2154 * the type. The firmware handles the packets based upon this set type.
2156 static int mwifiex_pcie_host_to_card(struct mwifiex_adapter
*adapter
, u8 type
,
2157 struct sk_buff
*skb
,
2158 struct mwifiex_tx_param
*tx_param
)
2161 dev_err(adapter
->dev
, "Passed NULL skb to %s\n", __func__
);
2165 if (type
== MWIFIEX_TYPE_DATA
)
2166 return mwifiex_pcie_send_data(adapter
, skb
, tx_param
);
2167 else if (type
== MWIFIEX_TYPE_CMD
)
2168 return mwifiex_pcie_send_cmd(adapter
, skb
);
2174 * This function initializes the PCI-E host memory space, WCB rings, etc.
2176 * The following initializations steps are followed -
2177 * - Allocate TXBD ring buffers
2178 * - Allocate RXBD ring buffers
2179 * - Allocate event BD ring buffers
2180 * - Allocate command response ring buffer
2181 * - Allocate sleep cookie buffer
2183 static int mwifiex_pcie_init(struct mwifiex_adapter
*adapter
)
2185 struct pcie_service_card
*card
= adapter
->card
;
2187 struct pci_dev
*pdev
= card
->dev
;
2188 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
2190 pci_set_drvdata(pdev
, card
);
2192 ret
= pci_enable_device(pdev
);
2194 goto err_enable_dev
;
2196 pci_set_master(pdev
);
2198 dev_dbg(adapter
->dev
, "try set_consistent_dma_mask(32)\n");
2199 ret
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
2201 dev_err(adapter
->dev
, "set_dma_mask(32) failed\n");
2202 goto err_set_dma_mask
;
2205 ret
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
2207 dev_err(adapter
->dev
, "set_consistent_dma_mask(64) failed\n");
2208 goto err_set_dma_mask
;
2211 ret
= pci_request_region(pdev
, 0, DRV_NAME
);
2213 dev_err(adapter
->dev
, "req_reg(0) error\n");
2214 goto err_req_region0
;
2216 card
->pci_mmap
= pci_iomap(pdev
, 0, 0);
2217 if (!card
->pci_mmap
) {
2218 dev_err(adapter
->dev
, "iomap(0) error\n");
2222 ret
= pci_request_region(pdev
, 2, DRV_NAME
);
2224 dev_err(adapter
->dev
, "req_reg(2) error\n");
2225 goto err_req_region2
;
2227 card
->pci_mmap1
= pci_iomap(pdev
, 2, 0);
2228 if (!card
->pci_mmap1
) {
2229 dev_err(adapter
->dev
, "iomap(2) error\n");
2234 dev_dbg(adapter
->dev
,
2235 "PCI memory map Virt0: %p PCI memory map Virt2: %p\n",
2236 card
->pci_mmap
, card
->pci_mmap1
);
2238 card
->cmdrsp_buf
= NULL
;
2239 ret
= mwifiex_pcie_create_txbd_ring(adapter
);
2242 ret
= mwifiex_pcie_create_rxbd_ring(adapter
);
2245 ret
= mwifiex_pcie_create_evtbd_ring(adapter
);
2248 ret
= mwifiex_pcie_alloc_cmdrsp_buf(adapter
);
2250 goto err_alloc_cmdbuf
;
2251 if (reg
->sleep_cookie
) {
2252 ret
= mwifiex_pcie_alloc_sleep_cookie_buf(adapter
);
2254 goto err_alloc_cookie
;
2256 card
->sleep_cookie_vbase
= NULL
;
2261 mwifiex_pcie_delete_cmdrsp_buf(adapter
);
2263 mwifiex_pcie_delete_evtbd_ring(adapter
);
2265 mwifiex_pcie_delete_rxbd_ring(adapter
);
2267 mwifiex_pcie_delete_txbd_ring(adapter
);
2269 pci_iounmap(pdev
, card
->pci_mmap1
);
2271 pci_release_region(pdev
, 2);
2273 pci_iounmap(pdev
, card
->pci_mmap
);
2275 pci_release_region(pdev
, 0);
2278 pci_disable_device(pdev
);
2280 pci_set_drvdata(pdev
, NULL
);
2285 * This function cleans up the allocated card buffers.
2287 * The following are freed by this function -
2288 * - TXBD ring buffers
2289 * - RXBD ring buffers
2290 * - Event BD ring buffers
2291 * - Command response ring buffer
2292 * - Sleep cookie buffer
2294 static void mwifiex_pcie_cleanup(struct mwifiex_adapter
*adapter
)
2296 struct pcie_service_card
*card
= adapter
->card
;
2297 struct pci_dev
*pdev
= card
->dev
;
2298 const struct mwifiex_pcie_card_reg
*reg
= card
->pcie
.reg
;
2301 dev_dbg(adapter
->dev
, "Clearing driver ready signature\n");
2302 if (mwifiex_write_reg(adapter
, reg
->drv_rdy
, 0x00000000))
2303 dev_err(adapter
->dev
,
2304 "Failed to write driver not-ready signature\n");
2308 pci_iounmap(pdev
, card
->pci_mmap
);
2309 pci_iounmap(pdev
, card
->pci_mmap1
);
2310 pci_disable_device(pdev
);
2311 pci_release_region(pdev
, 2);
2312 pci_release_region(pdev
, 0);
2313 pci_set_drvdata(pdev
, NULL
);
2319 * This function registers the PCIE device.
2321 * PCIE IRQ is claimed, block size is set and driver data is initialized.
2323 static int mwifiex_register_dev(struct mwifiex_adapter
*adapter
)
2326 struct pcie_service_card
*card
= adapter
->card
;
2327 struct pci_dev
*pdev
= card
->dev
;
2329 /* save adapter pointer in card */
2330 card
->adapter
= adapter
;
2332 ret
= request_irq(pdev
->irq
, mwifiex_pcie_interrupt
, IRQF_SHARED
,
2335 pr_err("request_irq failed: ret=%d\n", ret
);
2336 adapter
->card
= NULL
;
2340 adapter
->dev
= &pdev
->dev
;
2341 strcpy(adapter
->fw_name
, card
->pcie
.firmware
);
2347 * This function unregisters the PCIE device.
2349 * The PCIE IRQ is released, the function is disabled and driver
2350 * data is set to null.
2352 static void mwifiex_unregister_dev(struct mwifiex_adapter
*adapter
)
2354 struct pcie_service_card
*card
= adapter
->card
;
2355 const struct mwifiex_pcie_card_reg
*reg
;
2358 dev_dbg(adapter
->dev
, "%s(): calling free_irq()\n", __func__
);
2359 free_irq(card
->dev
->irq
, card
->dev
);
2361 reg
= card
->pcie
.reg
;
2362 if (reg
->sleep_cookie
)
2363 mwifiex_pcie_delete_sleep_cookie_buf(adapter
);
2365 mwifiex_pcie_delete_cmdrsp_buf(adapter
);
2366 mwifiex_pcie_delete_evtbd_ring(adapter
);
2367 mwifiex_pcie_delete_rxbd_ring(adapter
);
2368 mwifiex_pcie_delete_txbd_ring(adapter
);
2369 card
->cmdrsp_buf
= NULL
;
2373 static struct mwifiex_if_ops pcie_ops
= {
2374 .init_if
= mwifiex_pcie_init
,
2375 .cleanup_if
= mwifiex_pcie_cleanup
,
2376 .check_fw_status
= mwifiex_check_fw_status
,
2377 .prog_fw
= mwifiex_prog_fw_w_helper
,
2378 .register_dev
= mwifiex_register_dev
,
2379 .unregister_dev
= mwifiex_unregister_dev
,
2380 .enable_int
= mwifiex_pcie_enable_host_int
,
2381 .process_int_status
= mwifiex_process_int_status
,
2382 .host_to_card
= mwifiex_pcie_host_to_card
,
2383 .wakeup
= mwifiex_pm_wakeup_card
,
2384 .wakeup_complete
= mwifiex_pm_wakeup_card_complete
,
2387 .cmdrsp_complete
= mwifiex_pcie_cmdrsp_complete
,
2388 .event_complete
= mwifiex_pcie_event_complete
,
2389 .update_mp_end_port
= NULL
,
2390 .cleanup_mpa_buf
= NULL
,
2391 .init_fw_port
= mwifiex_pcie_init_fw_port
,
2392 .clean_pcie_ring
= mwifiex_clean_pcie_ring_buf
,
2396 * This function initializes the PCIE driver module.
2398 * This initiates the semaphore and registers the device with
2401 static int mwifiex_pcie_init_module(void)
2405 pr_debug("Marvell PCIe Driver\n");
2407 sema_init(&add_remove_card_sem
, 1);
2409 /* Clear the flag in case user removes the card. */
2412 ret
= pci_register_driver(&mwifiex_pcie
);
2414 pr_err("Driver register failed!\n");
2416 pr_debug("info: Driver registered successfully!\n");
2422 * This function cleans up the PCIE driver.
2424 * The following major steps are followed for cleanup -
2425 * - Resume the device if its suspended
2426 * - Disconnect the device if connected
2427 * - Shutdown the firmware
2428 * - Unregister the device from PCIE bus.
2430 static void mwifiex_pcie_cleanup_module(void)
2432 if (!down_interruptible(&add_remove_card_sem
))
2433 up(&add_remove_card_sem
);
2435 /* Set the flag as user is removing this module. */
2438 pci_unregister_driver(&mwifiex_pcie
);
2441 module_init(mwifiex_pcie_init_module
);
2442 module_exit(mwifiex_pcie_cleanup_module
);
2444 MODULE_AUTHOR("Marvell International Ltd.");
2445 MODULE_DESCRIPTION("Marvell WiFi-Ex PCI-Express Driver version " PCIE_VERSION
);
2446 MODULE_VERSION(PCIE_VERSION
);
2447 MODULE_LICENSE("GPL v2");
2448 MODULE_FIRMWARE(PCIE8766_DEFAULT_FW_NAME
);
2449 MODULE_FIRMWARE(PCIE8897_DEFAULT_FW_NAME
);