?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
fix a kmap leak in virtio_console
[linux/fpc-iii.git] / drivers / net / wireless / ti / wl12xx / main.c
blobbe7129ba16ad651524910c1897a33b7d48570007
1 /*
2 * This file is part of wl1271
3 *
4 * Copyright (C) 2008-2010 Nokia Corporation
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
18 * 02110-1301 USA
19 *
20 */
21
22 #include <linux/module.h>
23 #include <linux/platform_device.h>
24
25 #include <linux/err.h>
26
27 #include <linux/wl12xx.h>
28
29 #include "../wlcore/wlcore.h"
30 #include "../wlcore/debug.h"
31 #include "../wlcore/io.h"
32 #include "../wlcore/acx.h"
33 #include "../wlcore/tx.h"
34 #include "../wlcore/rx.h"
35 #include "../wlcore/boot.h"
36
37 #include "wl12xx.h"
38 #include "reg.h"
39 #include "cmd.h"
40 #include "acx.h"
41 #include "scan.h"
42 #include "event.h"
43 #include "debugfs.h"
44
45 static char *fref_param;
46 static char *tcxo_param;
47
48 static struct wlcore_conf wl12xx_conf = {
49 .sg = {
50 .params = {
51 [CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
52 [CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
53 [CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
54 [CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
55 [CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
56 [CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
57 [CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
58 [CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
59 [CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
60 [CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
61 [CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
62 [CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
63 [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
64 [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
65 [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
66 [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
67 [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
68 [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
69 [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
70 [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
71 [CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
72 [CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
73 [CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
74 [CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
75 [CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
76 [CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
77 /* active scan params */
78 [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
79 [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
80 [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
81 /* passive scan params */
82 [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
83 [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
84 [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
85 /* passive scan in dual antenna params */
86 [CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
87 [CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
88 [CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
89 /* general params */
90 [CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
91 [CONF_SG_ANTENNA_CONFIGURATION] = 0,
92 [CONF_SG_BEACON_MISS_PERCENT] = 60,
93 [CONF_SG_DHCP_TIME] = 5000,
94 [CONF_SG_RXT] = 1200,
95 [CONF_SG_TXT] = 1000,
96 [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
97 [CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
98 [CONF_SG_HV3_MAX_SERVED] = 6,
99 [CONF_SG_PS_POLL_TIMEOUT] = 10,
100 [CONF_SG_UPSD_TIMEOUT] = 10,
101 [CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
102 [CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
103 [CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
104 /* AP params */
105 [CONF_AP_BEACON_MISS_TX] = 3,
106 [CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
107 [CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
108 [CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
109 [CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
110 [CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
111 /* CTS Diluting params */
112 [CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
113 [CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
114 },
115 .state = CONF_SG_PROTECTIVE,
116 },
117 .rx = {
118 .rx_msdu_life_time = 512000,
119 .packet_detection_threshold = 0,
120 .ps_poll_timeout = 15,
121 .upsd_timeout = 15,
122 .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD,
123 .rx_cca_threshold = 0,
124 .irq_blk_threshold = 0xFFFF,
125 .irq_pkt_threshold = 0,
126 .irq_timeout = 600,
127 .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
128 },
129 .tx = {
130 .tx_energy_detection = 0,
131 .sta_rc_conf = {
132 .enabled_rates = 0,
133 .short_retry_limit = 10,
134 .long_retry_limit = 10,
135 .aflags = 0,
136 },
137 .ac_conf_count = 4,
138 .ac_conf = {
139 [CONF_TX_AC_BE] = {
140 .ac = CONF_TX_AC_BE,
141 .cw_min = 15,
142 .cw_max = 63,
143 .aifsn = 3,
144 .tx_op_limit = 0,
145 },
146 [CONF_TX_AC_BK] = {
147 .ac = CONF_TX_AC_BK,
148 .cw_min = 15,
149 .cw_max = 63,
150 .aifsn = 7,
151 .tx_op_limit = 0,
152 },
153 [CONF_TX_AC_VI] = {
154 .ac = CONF_TX_AC_VI,
155 .cw_min = 15,
156 .cw_max = 63,
157 .aifsn = CONF_TX_AIFS_PIFS,
158 .tx_op_limit = 3008,
159 },
160 [CONF_TX_AC_VO] = {
161 .ac = CONF_TX_AC_VO,
162 .cw_min = 15,
163 .cw_max = 63,
164 .aifsn = CONF_TX_AIFS_PIFS,
165 .tx_op_limit = 1504,
166 },
167 },
168 .max_tx_retries = 100,
169 .ap_aging_period = 300,
170 .tid_conf_count = 4,
171 .tid_conf = {
172 [CONF_TX_AC_BE] = {
173 .queue_id = CONF_TX_AC_BE,
174 .channel_type = CONF_CHANNEL_TYPE_EDCF,
175 .tsid = CONF_TX_AC_BE,
176 .ps_scheme = CONF_PS_SCHEME_LEGACY,
177 .ack_policy = CONF_ACK_POLICY_LEGACY,
178 .apsd_conf = {0, 0},
179 },
180 [CONF_TX_AC_BK] = {
181 .queue_id = CONF_TX_AC_BK,
182 .channel_type = CONF_CHANNEL_TYPE_EDCF,
183 .tsid = CONF_TX_AC_BK,
184 .ps_scheme = CONF_PS_SCHEME_LEGACY,
185 .ack_policy = CONF_ACK_POLICY_LEGACY,
186 .apsd_conf = {0, 0},
187 },
188 [CONF_TX_AC_VI] = {
189 .queue_id = CONF_TX_AC_VI,
190 .channel_type = CONF_CHANNEL_TYPE_EDCF,
191 .tsid = CONF_TX_AC_VI,
192 .ps_scheme = CONF_PS_SCHEME_LEGACY,
193 .ack_policy = CONF_ACK_POLICY_LEGACY,
194 .apsd_conf = {0, 0},
195 },
196 [CONF_TX_AC_VO] = {
197 .queue_id = CONF_TX_AC_VO,
198 .channel_type = CONF_CHANNEL_TYPE_EDCF,
199 .tsid = CONF_TX_AC_VO,
200 .ps_scheme = CONF_PS_SCHEME_LEGACY,
201 .ack_policy = CONF_ACK_POLICY_LEGACY,
202 .apsd_conf = {0, 0},
203 },
204 },
205 .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
206 .tx_compl_timeout = 700,
207 .tx_compl_threshold = 4,
208 .basic_rate = CONF_HW_BIT_RATE_1MBPS,
209 .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS,
210 .tmpl_short_retry_limit = 10,
211 .tmpl_long_retry_limit = 10,
212 .tx_watchdog_timeout = 5000,
213 .slow_link_thold = 3,
214 .fast_link_thold = 10,
215 },
216 .conn = {
217 .wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
218 .listen_interval = 1,
219 .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM,
220 .suspend_listen_interval = 3,
221 .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED,
222 .bcn_filt_ie_count = 3,
223 .bcn_filt_ie = {
224 [0] = {
225 .ie = WLAN_EID_CHANNEL_SWITCH,
226 .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
227 },
228 [1] = {
229 .ie = WLAN_EID_HT_OPERATION,
230 .rule = CONF_BCN_RULE_PASS_ON_CHANGE,
231 },
232 [2] = {
233 .ie = WLAN_EID_ERP_INFO,
234 .rule = CONF_BCN_RULE_PASS_ON_CHANGE,
235 },
236 },
237 .synch_fail_thold = 12,
238 .bss_lose_timeout = 400,
239 .beacon_rx_timeout = 10000,
240 .broadcast_timeout = 20000,
241 .rx_broadcast_in_ps = 1,
242 .ps_poll_threshold = 10,
243 .bet_enable = CONF_BET_MODE_ENABLE,
244 .bet_max_consecutive = 50,
245 .psm_entry_retries = 8,
246 .psm_exit_retries = 16,
247 .psm_entry_nullfunc_retries = 3,
248 .dynamic_ps_timeout = 1500,
249 .forced_ps = false,
250 .keep_alive_interval = 55000,
251 .max_listen_interval = 20,
252 .sta_sleep_auth = WL1271_PSM_ILLEGAL,
253 },
254 .itrim = {
255 .enable = false,
256 .timeout = 50000,
257 },
258 .pm_config = {
259 .host_clk_settling_time = 5000,
260 .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE,
261 },
262 .roam_trigger = {
263 .trigger_pacing = 1,
264 .avg_weight_rssi_beacon = 20,
265 .avg_weight_rssi_data = 10,
266 .avg_weight_snr_beacon = 20,
267 .avg_weight_snr_data = 10,
268 },
269 .scan = {
270 .min_dwell_time_active = 7500,
271 .max_dwell_time_active = 30000,
272 .min_dwell_time_active_long = 25000,
273 .max_dwell_time_active_long = 50000,
274 .dwell_time_passive = 100000,
275 .dwell_time_dfs = 150000,
276 .num_probe_reqs = 2,
277 .split_scan_timeout = 50000,
278 },
279 .sched_scan = {
280 /*
281 * Values are in TU/1000 but since sched scan FW command
282 * params are in TUs rounding up may occur.
283 */
284 .base_dwell_time = 7500,
285 .max_dwell_time_delta = 22500,
286 /* based on 250bits per probe @1Mbps */
287 .dwell_time_delta_per_probe = 2000,
288 /* based on 250bits per probe @6Mbps (plus a bit more) */
289 .dwell_time_delta_per_probe_5 = 350,
290 .dwell_time_passive = 100000,
291 .dwell_time_dfs = 150000,
292 .num_probe_reqs = 2,
293 .rssi_threshold = -90,
294 .snr_threshold = 0,
295 },
296 .ht = {
297 .rx_ba_win_size = 8,
298 .tx_ba_win_size = 64,
299 .inactivity_timeout = 10000,
300 .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP,
301 },
302 /*
303 * Memory config for wl127x chips is given in the
304 * wl12xx_default_priv_conf struct. The below configuration is
305 * for wl128x chips.
306 */
307 .mem = {
308 .num_stations = 1,
309 .ssid_profiles = 1,
310 .rx_block_num = 40,
311 .tx_min_block_num = 40,
312 .dynamic_memory = 1,
313 .min_req_tx_blocks = 45,
314 .min_req_rx_blocks = 22,
315 .tx_min = 27,
316 },
317 .fm_coex = {
318 .enable = true,
319 .swallow_period = 5,
320 .n_divider_fref_set_1 = 0xff, /* default */
321 .n_divider_fref_set_2 = 12,
322 .m_divider_fref_set_1 = 0xffff,
323 .m_divider_fref_set_2 = 148, /* default */
324 .coex_pll_stabilization_time = 0xffffffff, /* default */
325 .ldo_stabilization_time = 0xffff, /* default */
326 .fm_disturbed_band_margin = 0xff, /* default */
327 .swallow_clk_diff = 0xff, /* default */
328 },
329 .rx_streaming = {
330 .duration = 150,
331 .queues = 0x1,
332 .interval = 20,
333 .always = 0,
334 },
335 .fwlog = {
336 .mode = WL12XX_FWLOG_CONTINUOUS,
337 .mem_blocks = 2,
338 .severity = 0,
339 .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED,
340 .output = WL12XX_FWLOG_OUTPUT_DBG_PINS,
341 .threshold = 0,
342 },
343 .rate = {
344 .rate_retry_score = 32000,
345 .per_add = 8192,
346 .per_th1 = 2048,
347 .per_th2 = 4096,
348 .max_per = 8100,
349 .inverse_curiosity_factor = 5,
350 .tx_fail_low_th = 4,
351 .tx_fail_high_th = 10,
352 .per_alpha_shift = 4,
353 .per_add_shift = 13,
354 .per_beta1_shift = 10,
355 .per_beta2_shift = 8,
356 .rate_check_up = 2,
357 .rate_check_down = 12,
358 .rate_retry_policy = {
359 0x00, 0x00, 0x00, 0x00, 0x00,
360 0x00, 0x00, 0x00, 0x00, 0x00,
361 0x00, 0x00, 0x00,
362 },
363 },
364 .hangover = {
365 .recover_time = 0,
366 .hangover_period = 20,
367 .dynamic_mode = 1,
368 .early_termination_mode = 1,
369 .max_period = 20,
370 .min_period = 1,
371 .increase_delta = 1,
372 .decrease_delta = 2,
373 .quiet_time = 4,
374 .increase_time = 1,
375 .window_size = 16,
376 },
377 .recovery = {
378 .bug_on_recovery = 0,
379 .no_recovery = 0,
380 },
381 };
382
383 static struct wl12xx_priv_conf wl12xx_default_priv_conf = {
384 .rf = {
385 .tx_per_channel_power_compensation_2 = {
386 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
387 },
388 .tx_per_channel_power_compensation_5 = {
389 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
390 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
391 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
392 },
393 },
394 .mem_wl127x = {
395 .num_stations = 1,
396 .ssid_profiles = 1,
397 .rx_block_num = 70,
398 .tx_min_block_num = 40,
399 .dynamic_memory = 1,
400 .min_req_tx_blocks = 100,
401 .min_req_rx_blocks = 22,
402 .tx_min = 27,
403 },
404
405 };
406
407 #define WL12XX_TX_HW_BLOCK_SPARE_DEFAULT 1
408 #define WL12XX_TX_HW_BLOCK_GEM_SPARE 2
409 #define WL12XX_TX_HW_BLOCK_SIZE 252
410
411 static const u8 wl12xx_rate_to_idx_2ghz[] = {
412 /* MCS rates are used only with 11n */
413 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */
414 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */
415 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */
416 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */
417 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */
418 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */
419 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */
420 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */
421 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */
422
423 11, /* WL12XX_CONF_HW_RXTX_RATE_54 */
424 10, /* WL12XX_CONF_HW_RXTX_RATE_48 */
425 9, /* WL12XX_CONF_HW_RXTX_RATE_36 */
426 8, /* WL12XX_CONF_HW_RXTX_RATE_24 */
427
428 /* TI-specific rate */
429 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */
430
431 7, /* WL12XX_CONF_HW_RXTX_RATE_18 */
432 6, /* WL12XX_CONF_HW_RXTX_RATE_12 */
433 3, /* WL12XX_CONF_HW_RXTX_RATE_11 */
434 5, /* WL12XX_CONF_HW_RXTX_RATE_9 */
435 4, /* WL12XX_CONF_HW_RXTX_RATE_6 */
436 2, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */
437 1, /* WL12XX_CONF_HW_RXTX_RATE_2 */
438 0 /* WL12XX_CONF_HW_RXTX_RATE_1 */
439 };
440
441 static const u8 wl12xx_rate_to_idx_5ghz[] = {
442 /* MCS rates are used only with 11n */
443 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */
444 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */
445 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */
446 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */
447 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */
448 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */
449 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */
450 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */
451 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */
452
453 7, /* WL12XX_CONF_HW_RXTX_RATE_54 */
454 6, /* WL12XX_CONF_HW_RXTX_RATE_48 */
455 5, /* WL12XX_CONF_HW_RXTX_RATE_36 */
456 4, /* WL12XX_CONF_HW_RXTX_RATE_24 */
457
458 /* TI-specific rate */
459 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */
460
461 3, /* WL12XX_CONF_HW_RXTX_RATE_18 */
462 2, /* WL12XX_CONF_HW_RXTX_RATE_12 */
463 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_11 */
464 1, /* WL12XX_CONF_HW_RXTX_RATE_9 */
465 0, /* WL12XX_CONF_HW_RXTX_RATE_6 */
466 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */
467 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_2 */
468 CONF_HW_RXTX_RATE_UNSUPPORTED /* WL12XX_CONF_HW_RXTX_RATE_1 */
469 };
470
471 static const u8 *wl12xx_band_rate_to_idx[] = {
472 [IEEE80211_BAND_2GHZ] = wl12xx_rate_to_idx_2ghz,
473 [IEEE80211_BAND_5GHZ] = wl12xx_rate_to_idx_5ghz
474 };
475
476 enum wl12xx_hw_rates {
477 WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI = 0,
478 WL12XX_CONF_HW_RXTX_RATE_MCS7,
479 WL12XX_CONF_HW_RXTX_RATE_MCS6,
480 WL12XX_CONF_HW_RXTX_RATE_MCS5,
481 WL12XX_CONF_HW_RXTX_RATE_MCS4,
482 WL12XX_CONF_HW_RXTX_RATE_MCS3,
483 WL12XX_CONF_HW_RXTX_RATE_MCS2,
484 WL12XX_CONF_HW_RXTX_RATE_MCS1,
485 WL12XX_CONF_HW_RXTX_RATE_MCS0,
486 WL12XX_CONF_HW_RXTX_RATE_54,
487 WL12XX_CONF_HW_RXTX_RATE_48,
488 WL12XX_CONF_HW_RXTX_RATE_36,
489 WL12XX_CONF_HW_RXTX_RATE_24,
490 WL12XX_CONF_HW_RXTX_RATE_22,
491 WL12XX_CONF_HW_RXTX_RATE_18,
492 WL12XX_CONF_HW_RXTX_RATE_12,
493 WL12XX_CONF_HW_RXTX_RATE_11,
494 WL12XX_CONF_HW_RXTX_RATE_9,
495 WL12XX_CONF_HW_RXTX_RATE_6,
496 WL12XX_CONF_HW_RXTX_RATE_5_5,
497 WL12XX_CONF_HW_RXTX_RATE_2,
498 WL12XX_CONF_HW_RXTX_RATE_1,
499 WL12XX_CONF_HW_RXTX_RATE_MAX,
500 };
501
502 static struct wlcore_partition_set wl12xx_ptable[PART_TABLE_LEN] = {
503 [PART_DOWN] = {
504 .mem = {
505 .start = 0x00000000,
506 .size = 0x000177c0
507 },
508 .reg = {
509 .start = REGISTERS_BASE,
510 .size = 0x00008800
511 },
512 .mem2 = {
513 .start = 0x00000000,
514 .size = 0x00000000
515 },
516 .mem3 = {
517 .start = 0x00000000,
518 .size = 0x00000000
519 },
520 },
521
522 [PART_BOOT] = { /* in wl12xx we can use a mix of work and down
523 * partition here */
524 .mem = {
525 .start = 0x00040000,
526 .size = 0x00014fc0
527 },
528 .reg = {
529 .start = REGISTERS_BASE,
530 .size = 0x00008800
531 },
532 .mem2 = {
533 .start = 0x00000000,
534 .size = 0x00000000
535 },
536 .mem3 = {
537 .start = 0x00000000,
538 .size = 0x00000000
539 },
540 },
541
542 [PART_WORK] = {
543 .mem = {
544 .start = 0x00040000,
545 .size = 0x00014fc0
546 },
547 .reg = {
548 .start = REGISTERS_BASE,
549 .size = 0x0000a000
550 },
551 .mem2 = {
552 .start = 0x003004f8,
553 .size = 0x00000004
554 },
555 .mem3 = {
556 .start = 0x00040404,
557 .size = 0x00000000
558 },
559 },
560
561 [PART_DRPW] = {
562 .mem = {
563 .start = 0x00040000,
564 .size = 0x00014fc0
565 },
566 .reg = {
567 .start = DRPW_BASE,
568 .size = 0x00006000
569 },
570 .mem2 = {
571 .start = 0x00000000,
572 .size = 0x00000000
573 },
574 .mem3 = {
575 .start = 0x00000000,
576 .size = 0x00000000
577 }
578 }
579 };
580
581 static const int wl12xx_rtable[REG_TABLE_LEN] = {
582 [REG_ECPU_CONTROL] = WL12XX_REG_ECPU_CONTROL,
583 [REG_INTERRUPT_NO_CLEAR] = WL12XX_REG_INTERRUPT_NO_CLEAR,
584 [REG_INTERRUPT_ACK] = WL12XX_REG_INTERRUPT_ACK,
585 [REG_COMMAND_MAILBOX_PTR] = WL12XX_REG_COMMAND_MAILBOX_PTR,
586 [REG_EVENT_MAILBOX_PTR] = WL12XX_REG_EVENT_MAILBOX_PTR,
587 [REG_INTERRUPT_TRIG] = WL12XX_REG_INTERRUPT_TRIG,
588 [REG_INTERRUPT_MASK] = WL12XX_REG_INTERRUPT_MASK,
589 [REG_PC_ON_RECOVERY] = WL12XX_SCR_PAD4,
590 [REG_CHIP_ID_B] = WL12XX_CHIP_ID_B,
591 [REG_CMD_MBOX_ADDRESS] = WL12XX_CMD_MBOX_ADDRESS,
592
593 /* data access memory addresses, used with partition translation */
594 [REG_SLV_MEM_DATA] = WL1271_SLV_MEM_DATA,
595 [REG_SLV_REG_DATA] = WL1271_SLV_REG_DATA,
596
597 /* raw data access memory addresses */
598 [REG_RAW_FW_STATUS_ADDR] = FW_STATUS_ADDR,
599 };
600
601 /* TODO: maybe move to a new header file? */
602 #define WL127X_FW_NAME_MULTI "ti-connectivity/wl127x-fw-5-mr.bin"
603 #define WL127X_FW_NAME_SINGLE "ti-connectivity/wl127x-fw-5-sr.bin"
604 #define WL127X_PLT_FW_NAME "ti-connectivity/wl127x-fw-5-plt.bin"
605
606 #define WL128X_FW_NAME_MULTI "ti-connectivity/wl128x-fw-5-mr.bin"
607 #define WL128X_FW_NAME_SINGLE "ti-connectivity/wl128x-fw-5-sr.bin"
608 #define WL128X_PLT_FW_NAME "ti-connectivity/wl128x-fw-5-plt.bin"
609
610 static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
611 {
612 int ret;
613
614 if (wl->chip.id != CHIP_ID_128X_PG20) {
615 struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
616 struct wl12xx_priv *priv = wl->priv;
617
618 /*
619 * Choose the block we want to read
620 * For aggregated packets, only the first memory block
621 * should be retrieved. The FW takes care of the rest.
622 */
623 u32 mem_block = rx_desc & RX_MEM_BLOCK_MASK;
624
625 priv->rx_mem_addr->addr = (mem_block << 8) +
626 le32_to_cpu(wl_mem_map->packet_memory_pool_start);
627
628 priv->rx_mem_addr->addr_extra = priv->rx_mem_addr->addr + 4;
629
630 ret = wlcore_write(wl, WL1271_SLV_REG_DATA, priv->rx_mem_addr,
631 sizeof(*priv->rx_mem_addr), false);
632 if (ret < 0)
633 return ret;
634 }
635
636 return 0;
637 }
638
639 static int wl12xx_identify_chip(struct wl1271 *wl)
640 {
641 int ret = 0;
642
643 switch (wl->chip.id) {
644 case CHIP_ID_127X_PG10:
645 wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
646 wl->chip.id);
647
648 wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
649 WLCORE_QUIRK_DUAL_PROBE_TMPL |
650 WLCORE_QUIRK_TKIP_HEADER_SPACE |
651 WLCORE_QUIRK_START_STA_FAILS |
652 WLCORE_QUIRK_AP_ZERO_SESSION_ID;
653 wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
654 wl->mr_fw_name = WL127X_FW_NAME_MULTI;
655 memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x,
656 sizeof(wl->conf.mem));
657
658 /* read data preparation is only needed by wl127x */
659 wl->ops->prepare_read = wl127x_prepare_read;
660
661 wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER,
662 WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER,
663 WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER,
664 WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER,
665 WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER);
666 break;
667
668 case CHIP_ID_127X_PG20:
669 wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
670 wl->chip.id);
671
672 wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
673 WLCORE_QUIRK_DUAL_PROBE_TMPL |
674 WLCORE_QUIRK_TKIP_HEADER_SPACE |
675 WLCORE_QUIRK_START_STA_FAILS |
676 WLCORE_QUIRK_AP_ZERO_SESSION_ID;
677 wl->plt_fw_name = WL127X_PLT_FW_NAME;
678 wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
679 wl->mr_fw_name = WL127X_FW_NAME_MULTI;
680 memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x,
681 sizeof(wl->conf.mem));
682
683 /* read data preparation is only needed by wl127x */
684 wl->ops->prepare_read = wl127x_prepare_read;
685
686 wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER,
687 WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER,
688 WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER,
689 WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER,
690 WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER);
691 break;
692
693 case CHIP_ID_128X_PG20:
694 wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
695 wl->chip.id);
696 wl->plt_fw_name = WL128X_PLT_FW_NAME;
697 wl->sr_fw_name = WL128X_FW_NAME_SINGLE;
698 wl->mr_fw_name = WL128X_FW_NAME_MULTI;
699
700 /* wl128x requires TX blocksize alignment */
701 wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
702 WLCORE_QUIRK_DUAL_PROBE_TMPL |
703 WLCORE_QUIRK_TKIP_HEADER_SPACE |
704 WLCORE_QUIRK_START_STA_FAILS |
705 WLCORE_QUIRK_AP_ZERO_SESSION_ID;
706
707 wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER,
708 WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER,
709 WL128X_SUBTYPE_SR_VER, WL128X_MINOR_SR_VER,
710 WL128X_IFTYPE_MR_VER, WL128X_MAJOR_MR_VER,
711 WL128X_SUBTYPE_MR_VER, WL128X_MINOR_MR_VER);
712 break;
713 case CHIP_ID_128X_PG10:
714 default:
715 wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
716 ret = -ENODEV;
717 goto out;
718 }
719
720 wl->fw_mem_block_size = 256;
721 wl->fwlog_end = 0x2000000;
722
723 /* common settings */
724 wl->scan_templ_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY;
725 wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY;
726 wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4;
727 wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5;
728 wl->max_channels_5 = WL12XX_MAX_CHANNELS_5GHZ;
729 wl->ba_rx_session_count_max = WL12XX_RX_BA_MAX_SESSIONS;
730 out:
731 return ret;
732 }
733
734 static int __must_check wl12xx_top_reg_write(struct wl1271 *wl, int addr,
735 u16 val)
736 {
737 int ret;
738
739 /* write address >> 1 + 0x30000 to OCP_POR_CTR */
740 addr = (addr >> 1) + 0x30000;
741 ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
742 if (ret < 0)
743 goto out;
744
745 /* write value to OCP_POR_WDATA */
746 ret = wlcore_write32(wl, WL12XX_OCP_DATA_WRITE, val);
747 if (ret < 0)
748 goto out;
749
750 /* write 1 to OCP_CMD */
751 ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
752 if (ret < 0)
753 goto out;
754
755 out:
756 return ret;
757 }
758
759 static int __must_check wl12xx_top_reg_read(struct wl1271 *wl, int addr,
760 u16 *out)
761 {
762 u32 val;
763 int timeout = OCP_CMD_LOOP;
764 int ret;
765
766 /* write address >> 1 + 0x30000 to OCP_POR_CTR */
767 addr = (addr >> 1) + 0x30000;
768 ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
769 if (ret < 0)
770 return ret;
771
772 /* write 2 to OCP_CMD */
773 ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
774 if (ret < 0)
775 return ret;
776
777 /* poll for data ready */
778 do {
779 ret = wlcore_read32(wl, WL12XX_OCP_DATA_READ, &val);
780 if (ret < 0)
781 return ret;
782 } while (!(val & OCP_READY_MASK) && --timeout);
783
784 if (!timeout) {
785 wl1271_warning("Top register access timed out.");
786 return -ETIMEDOUT;
787 }
788
789 /* check data status and return if OK */
790 if ((val & OCP_STATUS_MASK) != OCP_STATUS_OK) {
791 wl1271_warning("Top register access returned error.");
792 return -EIO;
793 }
794
795 if (out)
796 *out = val & 0xffff;
797
798 return 0;
799 }
800
801 static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
802 {
803 u16 spare_reg;
804 int ret;
805
806 /* Mask bits [2] & [8:4] in the sys_clk_cfg register */
807 ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
808 if (ret < 0)
809 return ret;
810
811 if (spare_reg == 0xFFFF)
812 return -EFAULT;
813 spare_reg |= (BIT(3) | BIT(5) | BIT(6));
814 ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
815 if (ret < 0)
816 return ret;
817
818 /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
819 ret = wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
820 WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
821 if (ret < 0)
822 return ret;
823
824 /* Delay execution for 15msec, to let the HW settle */
825 mdelay(15);
826
827 return 0;
828 }
829
830 static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
831 {
832 u16 tcxo_detection;
833 int ret;
834
835 ret = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG, &tcxo_detection);
836 if (ret < 0)
837 return false;
838
839 if (tcxo_detection & TCXO_DET_FAILED)
840 return false;
841
842 return true;
843 }
844
845 static bool wl128x_is_fref_valid(struct wl1271 *wl)
846 {
847 u16 fref_detection;
848 int ret;
849
850 ret = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG, &fref_detection);
851 if (ret < 0)
852 return false;
853
854 if (fref_detection & FREF_CLK_DETECT_FAIL)
855 return false;
856
857 return true;
858 }
859
860 static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
861 {
862 int ret;
863
864 ret = wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
865 if (ret < 0)
866 goto out;
867
868 ret = wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
869 if (ret < 0)
870 goto out;
871
872 ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG,
873 MCS_PLL_CONFIG_REG_VAL);
874
875 out:
876 return ret;
877 }
878
879 static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
880 {
881 u16 spare_reg;
882 u16 pll_config;
883 u8 input_freq;
884 struct wl12xx_priv *priv = wl->priv;
885 int ret;
886
887 /* Mask bits [3:1] in the sys_clk_cfg register */
888 ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
889 if (ret < 0)
890 return ret;
891
892 if (spare_reg == 0xFFFF)
893 return -EFAULT;
894 spare_reg |= BIT(2);
895 ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
896 if (ret < 0)
897 return ret;
898
899 /* Handle special cases of the TCXO clock */
900 if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
901 priv->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
902 return wl128x_manually_configure_mcs_pll(wl);
903
904 /* Set the input frequency according to the selected clock source */
905 input_freq = (clk & 1) + 1;
906
907 ret = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG, &pll_config);
908 if (ret < 0)
909 return ret;
910
911 if (pll_config == 0xFFFF)
912 return -EFAULT;
913 pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
914 pll_config |= MCS_PLL_ENABLE_HP;
915 ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
916
917 return ret;
918 }
919
920 /*
921 * WL128x has two clocks input - TCXO and FREF.
922 * TCXO is the main clock of the device, while FREF is used to sync
923 * between the GPS and the cellular modem.
924 * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
925 * as the WLAN/BT main clock.
926 */
927 static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
928 {
929 struct wl12xx_priv *priv = wl->priv;
930 u16 sys_clk_cfg;
931 int ret;
932
933 /* For XTAL-only modes, FREF will be used after switching from TCXO */
934 if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
935 priv->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
936 if (!wl128x_switch_tcxo_to_fref(wl))
937 return -EINVAL;
938 goto fref_clk;
939 }
940
941 /* Query the HW, to determine which clock source we should use */
942 ret = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG, &sys_clk_cfg);
943 if (ret < 0)
944 return ret;
945
946 if (sys_clk_cfg == 0xFFFF)
947 return -EINVAL;
948 if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
949 goto fref_clk;
950
951 /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
952 if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
953 priv->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
954 if (!wl128x_switch_tcxo_to_fref(wl))
955 return -EINVAL;
956 goto fref_clk;
957 }
958
959 /* TCXO clock is selected */
960 if (!wl128x_is_tcxo_valid(wl))
961 return -EINVAL;
962 *selected_clock = priv->tcxo_clock;
963 goto config_mcs_pll;
964
965 fref_clk:
966 /* FREF clock is selected */
967 if (!wl128x_is_fref_valid(wl))
968 return -EINVAL;
969 *selected_clock = priv->ref_clock;
970
971 config_mcs_pll:
972 return wl128x_configure_mcs_pll(wl, *selected_clock);
973 }
974
975 static int wl127x_boot_clk(struct wl1271 *wl)
976 {
977 struct wl12xx_priv *priv = wl->priv;
978 u32 pause;
979 u32 clk;
980 int ret;
981
982 if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
983 wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
984
985 if (priv->ref_clock == CONF_REF_CLK_19_2_E ||
986 priv->ref_clock == CONF_REF_CLK_38_4_E ||
987 priv->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
988 /* ref clk: 19.2/38.4/38.4-XTAL */
989 clk = 0x3;
990 else if (priv->ref_clock == CONF_REF_CLK_26_E ||
991 priv->ref_clock == CONF_REF_CLK_26_M_XTAL ||
992 priv->ref_clock == CONF_REF_CLK_52_E)
993 /* ref clk: 26/52 */
994 clk = 0x5;
995 else
996 return -EINVAL;
997
998 if (priv->ref_clock != CONF_REF_CLK_19_2_E) {
999 u16 val;
1000 /* Set clock type (open drain) */
1001 ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE, &val);
1002 if (ret < 0)
1003 goto out;
1004
1005 val &= FREF_CLK_TYPE_BITS;
1006 ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
1007 if (ret < 0)
1008 goto out;
1009
1010 /* Set clock pull mode (no pull) */
1011 ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val);
1012 if (ret < 0)
1013 goto out;
1014
1015 val |= NO_PULL;
1016 ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
1017 if (ret < 0)
1018 goto out;
1019 } else {
1020 u16 val;
1021 /* Set clock polarity */
1022 ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY, &val);
1023 if (ret < 0)
1024 goto out;
1025
1026 val &= FREF_CLK_POLARITY_BITS;
1027 val |= CLK_REQ_OUTN_SEL;
1028 ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
1029 if (ret < 0)
1030 goto out;
1031 }
1032
1033 ret = wlcore_write32(wl, WL12XX_PLL_PARAMETERS, clk);
1034 if (ret < 0)
1035 goto out;
1036
1037 ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause);
1038 if (ret < 0)
1039 goto out;
1040
1041 wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
1042
1043 pause &= ~(WU_COUNTER_PAUSE_VAL);
1044 pause |= WU_COUNTER_PAUSE_VAL;
1045 ret = wlcore_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
1046
1047 out:
1048 return ret;
1049 }
1050
1051 static int wl1271_boot_soft_reset(struct wl1271 *wl)
1052 {
1053 unsigned long timeout;
1054 u32 boot_data;
1055 int ret = 0;
1056
1057 /* perform soft reset */
1058 ret = wlcore_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
1059 if (ret < 0)
1060 goto out;
1061
1062 /* SOFT_RESET is self clearing */
1063 timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
1064 while (1) {
1065 ret = wlcore_read32(wl, WL12XX_SLV_SOFT_RESET, &boot_data);
1066 if (ret < 0)
1067 goto out;
1068
1069 wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
1070 if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
1071 break;
1072
1073 if (time_after(jiffies, timeout)) {
1074 /* 1.2 check pWhalBus->uSelfClearTime if the
1075 * timeout was reached */
1076 wl1271_error("soft reset timeout");
1077 return -1;
1078 }
1079
1080 udelay(SOFT_RESET_STALL_TIME);
1081 }
1082
1083 /* disable Rx/Tx */
1084 ret = wlcore_write32(wl, WL12XX_ENABLE, 0x0);
1085 if (ret < 0)
1086 goto out;
1087
1088 /* disable auto calibration on start*/
1089 ret = wlcore_write32(wl, WL12XX_SPARE_A2, 0xffff);
1090
1091 out:
1092 return ret;
1093 }
1094
1095 static int wl12xx_pre_boot(struct wl1271 *wl)
1096 {
1097 struct wl12xx_priv *priv = wl->priv;
1098 int ret = 0;
1099 u32 clk;
1100 int selected_clock = -1;
1101
1102 if (wl->chip.id == CHIP_ID_128X_PG20) {
1103 ret = wl128x_boot_clk(wl, &selected_clock);
1104 if (ret < 0)
1105 goto out;
1106 } else {
1107 ret = wl127x_boot_clk(wl);
1108 if (ret < 0)
1109 goto out;
1110 }
1111
1112 /* Continue the ELP wake up sequence */
1113 ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
1114 if (ret < 0)
1115 goto out;
1116
1117 udelay(500);
1118
1119 ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
1120 if (ret < 0)
1121 goto out;
1122
1123 /* Read-modify-write DRPW_SCRATCH_START register (see next state)
1124 to be used by DRPw FW. The RTRIM value will be added by the FW
1125 before taking DRPw out of reset */
1126
1127 ret = wlcore_read32(wl, WL12XX_DRPW_SCRATCH_START, &clk);
1128 if (ret < 0)
1129 goto out;
1130
1131 wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
1132
1133 if (wl->chip.id == CHIP_ID_128X_PG20)
1134 clk |= ((selected_clock & 0x3) << 1) << 4;
1135 else
1136 clk |= (priv->ref_clock << 1) << 4;
1137
1138 ret = wlcore_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
1139 if (ret < 0)
1140 goto out;
1141
1142 ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
1143 if (ret < 0)
1144 goto out;
1145
1146 /* Disable interrupts */
1147 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
1148 if (ret < 0)
1149 goto out;
1150
1151 ret = wl1271_boot_soft_reset(wl);
1152 if (ret < 0)
1153 goto out;
1154
1155 out:
1156 return ret;
1157 }
1158
1159 static int wl12xx_pre_upload(struct wl1271 *wl)
1160 {
1161 u32 tmp;
1162 u16 polarity;
1163 int ret;
1164
1165 /* write firmware's last address (ie. it's length) to
1166 * ACX_EEPROMLESS_IND_REG */
1167 wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
1168
1169 ret = wlcore_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
1170 if (ret < 0)
1171 goto out;
1172
1173 ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
1174 if (ret < 0)
1175 goto out;
1176
1177 wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
1178
1179 /* 6. read the EEPROM parameters */
1180 ret = wlcore_read32(wl, WL12XX_SCR_PAD2, &tmp);
1181 if (ret < 0)
1182 goto out;
1183
1184 /* WL1271: The reference driver skips steps 7 to 10 (jumps directly
1185 * to upload_fw) */
1186
1187 if (wl->chip.id == CHIP_ID_128X_PG20) {
1188 ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
1189 if (ret < 0)
1190 goto out;
1191 }
1192
1193 /* polarity must be set before the firmware is loaded */
1194 ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity);
1195 if (ret < 0)
1196 goto out;
1197
1198 /* We use HIGH polarity, so unset the LOW bit */
1199 polarity &= ~POLARITY_LOW;
1200 ret = wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
1201
1202 out:
1203 return ret;
1204 }
1205
1206 static int wl12xx_enable_interrupts(struct wl1271 *wl)
1207 {
1208 int ret;
1209
1210 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
1211 WL12XX_ACX_ALL_EVENTS_VECTOR);
1212 if (ret < 0)
1213 goto out;
1214
1215 wlcore_enable_interrupts(wl);
1216 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
1217 WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK));
1218 if (ret < 0)
1219 goto disable_interrupts;
1220
1221 ret = wlcore_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
1222 if (ret < 0)
1223 goto disable_interrupts;
1224
1225 return ret;
1226
1227 disable_interrupts:
1228 wlcore_disable_interrupts(wl);
1229
1230 out:
1231 return ret;
1232 }
1233
1234 static int wl12xx_boot(struct wl1271 *wl)
1235 {
1236 int ret;
1237
1238 ret = wl12xx_pre_boot(wl);
1239 if (ret < 0)
1240 goto out;
1241
1242 ret = wlcore_boot_upload_nvs(wl);
1243 if (ret < 0)
1244 goto out;
1245
1246 ret = wl12xx_pre_upload(wl);
1247 if (ret < 0)
1248 goto out;
1249
1250 ret = wlcore_boot_upload_firmware(wl);
1251 if (ret < 0)
1252 goto out;
1253
1254 wl->event_mask = BSS_LOSE_EVENT_ID |
1255 REGAINED_BSS_EVENT_ID |
1256 SCAN_COMPLETE_EVENT_ID |
1257 ROLE_STOP_COMPLETE_EVENT_ID |
1258 RSSI_SNR_TRIGGER_0_EVENT_ID |
1259 PSPOLL_DELIVERY_FAILURE_EVENT_ID |
1260 SOFT_GEMINI_SENSE_EVENT_ID |
1261 PERIODIC_SCAN_REPORT_EVENT_ID |
1262 PERIODIC_SCAN_COMPLETE_EVENT_ID |
1263 DUMMY_PACKET_EVENT_ID |
1264 PEER_REMOVE_COMPLETE_EVENT_ID |
1265 BA_SESSION_RX_CONSTRAINT_EVENT_ID |
1266 REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
1267 INACTIVE_STA_EVENT_ID |
1268 CHANNEL_SWITCH_COMPLETE_EVENT_ID;
1269
1270 wl->ap_event_mask = MAX_TX_RETRY_EVENT_ID;
1271
1272 ret = wlcore_boot_run_firmware(wl);
1273 if (ret < 0)
1274 goto out;
1275
1276 ret = wl12xx_enable_interrupts(wl);
1277
1278 out:
1279 return ret;
1280 }
1281
1282 static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
1283 void *buf, size_t len)
1284 {
1285 int ret;
1286
1287 ret = wlcore_write(wl, cmd_box_addr, buf, len, false);
1288 if (ret < 0)
1289 return ret;
1290
1291 ret = wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
1292
1293 return ret;
1294 }
1295
1296 static int wl12xx_ack_event(struct wl1271 *wl)
1297 {
1298 return wlcore_write_reg(wl, REG_INTERRUPT_TRIG,
1299 WL12XX_INTR_TRIG_EVENT_ACK);
1300 }
1301
1302 static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
1303 {
1304 u32 blk_size = WL12XX_TX_HW_BLOCK_SIZE;
1305 u32 align_len = wlcore_calc_packet_alignment(wl, len);
1306
1307 return (align_len + blk_size - 1) / blk_size + spare_blks;
1308 }
1309
1310 static void
1311 wl12xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
1312 u32 blks, u32 spare_blks)
1313 {
1314 if (wl->chip.id == CHIP_ID_128X_PG20) {
1315 desc->wl128x_mem.total_mem_blocks = blks;
1316 } else {
1317 desc->wl127x_mem.extra_blocks = spare_blks;
1318 desc->wl127x_mem.total_mem_blocks = blks;
1319 }
1320 }
1321
1322 static void
1323 wl12xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
1324 struct sk_buff *skb)
1325 {
1326 u32 aligned_len = wlcore_calc_packet_alignment(wl, skb->len);
1327
1328 if (wl->chip.id == CHIP_ID_128X_PG20) {
1329 desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
1330 desc->length = cpu_to_le16(aligned_len >> 2);
1331
1332 wl1271_debug(DEBUG_TX,
1333 "tx_fill_hdr: hlid: %d len: %d life: %d mem: %d extra: %d",
1334 desc->hlid,
1335 le16_to_cpu(desc->length),
1336 le16_to_cpu(desc->life_time),
1337 desc->wl128x_mem.total_mem_blocks,
1338 desc->wl128x_mem.extra_bytes);
1339 } else {
1340 /* calculate number of padding bytes */
1341 int pad = aligned_len - skb->len;
1342 desc->tx_attr |=
1343 cpu_to_le16(pad << TX_HW_ATTR_OFST_LAST_WORD_PAD);
1344
1345 /* Store the aligned length in terms of words */
1346 desc->length = cpu_to_le16(aligned_len >> 2);
1347
1348 wl1271_debug(DEBUG_TX,
1349 "tx_fill_hdr: pad: %d hlid: %d len: %d life: %d mem: %d",
1350 pad, desc->hlid,
1351 le16_to_cpu(desc->length),
1352 le16_to_cpu(desc->life_time),
1353 desc->wl127x_mem.total_mem_blocks);
1354 }
1355 }
1356
1357 static enum wl_rx_buf_align
1358 wl12xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
1359 {
1360 if (rx_desc & RX_BUF_UNALIGNED_PAYLOAD)
1361 return WLCORE_RX_BUF_UNALIGNED;
1362
1363 return WLCORE_RX_BUF_ALIGNED;
1364 }
1365
1366 static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
1367 u32 data_len)
1368 {
1369 struct wl1271_rx_descriptor *desc = rx_data;
1370
1371 /* invalid packet */
1372 if (data_len < sizeof(*desc) ||
1373 data_len < sizeof(*desc) + desc->pad_len)
1374 return 0;
1375
1376 return data_len - sizeof(*desc) - desc->pad_len;
1377 }
1378
1379 static int wl12xx_tx_delayed_compl(struct wl1271 *wl)
1380 {
1381 if (wl->fw_status_1->tx_results_counter ==
1382 (wl->tx_results_count & 0xff))
1383 return 0;
1384
1385 return wlcore_tx_complete(wl);
1386 }
1387
1388 static int wl12xx_hw_init(struct wl1271 *wl)
1389 {
1390 int ret;
1391
1392 if (wl->chip.id == CHIP_ID_128X_PG20) {
1393 u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
1394
1395 ret = wl128x_cmd_general_parms(wl);
1396 if (ret < 0)
1397 goto out;
1398
1399 /*
1400 * If we are in calibrator based auto detect then we got the FEM nr
1401 * in wl->fem_manuf. No need to continue further
1402 */
1403 if (wl->plt_mode == PLT_FEM_DETECT)
1404 goto out;
1405
1406 ret = wl128x_cmd_radio_parms(wl);
1407 if (ret < 0)
1408 goto out;
1409
1410 if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN)
1411 /* Enable SDIO padding */
1412 host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
1413
1414 /* Must be before wl1271_acx_init_mem_config() */
1415 ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
1416 if (ret < 0)
1417 goto out;
1418 } else {
1419 ret = wl1271_cmd_general_parms(wl);
1420 if (ret < 0)
1421 goto out;
1422
1423 /*
1424 * If we are in calibrator based auto detect then we got the FEM nr
1425 * in wl->fem_manuf. No need to continue further
1426 */
1427 if (wl->plt_mode == PLT_FEM_DETECT)
1428 goto out;
1429
1430 ret = wl1271_cmd_radio_parms(wl);
1431 if (ret < 0)
1432 goto out;
1433 ret = wl1271_cmd_ext_radio_parms(wl);
1434 if (ret < 0)
1435 goto out;
1436 }
1437 out:
1438 return ret;
1439 }
1440
1441 static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl,
1442 struct wl12xx_vif *wlvif)
1443 {
1444 return wlvif->rate_set;
1445 }
1446
1447 static void wl12xx_conf_init(struct wl1271 *wl)
1448 {
1449 struct wl12xx_priv *priv = wl->priv;
1450
1451 /* apply driver default configuration */
1452 memcpy(&wl->conf, &wl12xx_conf, sizeof(wl12xx_conf));
1453
1454 /* apply default private configuration */
1455 memcpy(&priv->conf, &wl12xx_default_priv_conf, sizeof(priv->conf));
1456 }
1457
1458 static bool wl12xx_mac_in_fuse(struct wl1271 *wl)
1459 {
1460 bool supported = false;
1461 u8 major, minor;
1462
1463 if (wl->chip.id == CHIP_ID_128X_PG20) {
1464 major = WL128X_PG_GET_MAJOR(wl->hw_pg_ver);
1465 minor = WL128X_PG_GET_MINOR(wl->hw_pg_ver);
1466
1467 /* in wl128x we have the MAC address if the PG is >= (2, 1) */
1468 if (major > 2 || (major == 2 && minor >= 1))
1469 supported = true;
1470 } else {
1471 major = WL127X_PG_GET_MAJOR(wl->hw_pg_ver);
1472 minor = WL127X_PG_GET_MINOR(wl->hw_pg_ver);
1473
1474 /* in wl127x we have the MAC address if the PG is >= (3, 1) */
1475 if (major == 3 && minor >= 1)
1476 supported = true;
1477 }
1478
1479 wl1271_debug(DEBUG_PROBE,
1480 "PG Ver major = %d minor = %d, MAC %s present",
1481 major, minor, supported ? "is" : "is not");
1482
1483 return supported;
1484 }
1485
1486 static int wl12xx_get_fuse_mac(struct wl1271 *wl)
1487 {
1488 u32 mac1, mac2;
1489 int ret;
1490
1491 ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
1492 if (ret < 0)
1493 goto out;
1494
1495 ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1);
1496 if (ret < 0)
1497 goto out;
1498
1499 ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2, &mac2);
1500 if (ret < 0)
1501 goto out;
1502
1503 /* these are the two parts of the BD_ADDR */
1504 wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
1505 ((mac1 & 0xff000000) >> 24);
1506 wl->fuse_nic_addr = mac1 & 0xffffff;
1507
1508 ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
1509
1510 out:
1511 return ret;
1512 }
1513
1514 static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
1515 {
1516 u16 die_info;
1517 int ret;
1518
1519 if (wl->chip.id == CHIP_ID_128X_PG20)
1520 ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1,
1521 &die_info);
1522 else
1523 ret = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1,
1524 &die_info);
1525
1526 if (ret >= 0 && ver)
1527 *ver = (s8)((die_info & PG_VER_MASK) >> PG_VER_OFFSET);
1528
1529 return ret;
1530 }
1531
1532 static int wl12xx_get_mac(struct wl1271 *wl)
1533 {
1534 if (wl12xx_mac_in_fuse(wl))
1535 return wl12xx_get_fuse_mac(wl);
1536
1537 return 0;
1538 }
1539
1540 static void wl12xx_set_tx_desc_csum(struct wl1271 *wl,
1541 struct wl1271_tx_hw_descr *desc,
1542 struct sk_buff *skb)
1543 {
1544 desc->wl12xx_reserved = 0;
1545 }
1546
1547 static int wl12xx_plt_init(struct wl1271 *wl)
1548 {
1549 int ret;
1550
1551 ret = wl->ops->boot(wl);
1552 if (ret < 0)
1553 goto out;
1554
1555 ret = wl->ops->hw_init(wl);
1556 if (ret < 0)
1557 goto out_irq_disable;
1558
1559 /*
1560 * If we are in calibrator based auto detect then we got the FEM nr
1561 * in wl->fem_manuf. No need to continue further
1562 */
1563 if (wl->plt_mode == PLT_FEM_DETECT)
1564 goto out;
1565
1566 ret = wl1271_acx_init_mem_config(wl);
1567 if (ret < 0)
1568 goto out_irq_disable;
1569
1570 ret = wl12xx_acx_mem_cfg(wl);
1571 if (ret < 0)
1572 goto out_free_memmap;
1573
1574 /* Enable data path */
1575 ret = wl1271_cmd_data_path(wl, 1);
1576 if (ret < 0)
1577 goto out_free_memmap;
1578
1579 /* Configure for CAM power saving (ie. always active) */
1580 ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
1581 if (ret < 0)
1582 goto out_free_memmap;
1583
1584 /* configure PM */
1585 ret = wl1271_acx_pm_config(wl);
1586 if (ret < 0)
1587 goto out_free_memmap;
1588
1589 goto out;
1590
1591 out_free_memmap:
1592 kfree(wl->target_mem_map);
1593 wl->target_mem_map = NULL;
1594
1595 out_irq_disable:
1596 mutex_unlock(&wl->mutex);
1597 /* Unlocking the mutex in the middle of handling is
1598 inherently unsafe. In this case we deem it safe to do,
1599 because we need to let any possibly pending IRQ out of
1600 the system (and while we are WL1271_STATE_OFF the IRQ
1601 work function will not do anything.) Also, any other
1602 possible concurrent operations will fail due to the
1603 current state, hence the wl1271 struct should be safe. */
1604 wlcore_disable_interrupts(wl);
1605 mutex_lock(&wl->mutex);
1606 out:
1607 return ret;
1608 }
1609
1610 static int wl12xx_get_spare_blocks(struct wl1271 *wl, bool is_gem)
1611 {
1612 if (is_gem)
1613 return WL12XX_TX_HW_BLOCK_GEM_SPARE;
1614
1615 return WL12XX_TX_HW_BLOCK_SPARE_DEFAULT;
1616 }
1617
1618 static int wl12xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
1619 struct ieee80211_vif *vif,
1620 struct ieee80211_sta *sta,
1621 struct ieee80211_key_conf *key_conf)
1622 {
1623 return wlcore_set_key(wl, cmd, vif, sta, key_conf);
1624 }
1625
1626 static int wl12xx_set_peer_cap(struct wl1271 *wl,
1627 struct ieee80211_sta_ht_cap *ht_cap,
1628 bool allow_ht_operation,
1629 u32 rate_set, u8 hlid)
1630 {
1631 return wl1271_acx_set_ht_capabilities(wl, ht_cap, allow_ht_operation,
1632 hlid);
1633 }
1634
1635 static bool wl12xx_lnk_high_prio(struct wl1271 *wl, u8 hlid,
1636 struct wl1271_link *lnk)
1637 {
1638 u8 thold;
1639
1640 if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map))
1641 thold = wl->conf.tx.fast_link_thold;
1642 else
1643 thold = wl->conf.tx.slow_link_thold;
1644
1645 return lnk->allocated_pkts < thold;
1646 }
1647
1648 static bool wl12xx_lnk_low_prio(struct wl1271 *wl, u8 hlid,
1649 struct wl1271_link *lnk)
1650 {
1651 /* any link is good for low priority */
1652 return true;
1653 }
1654
1655 static u32 wl12xx_convert_hwaddr(struct wl1271 *wl, u32 hwaddr)
1656 {
1657 return hwaddr << 5;
1658 }
1659
1660 static int wl12xx_setup(struct wl1271 *wl);
1661
1662 static struct wlcore_ops wl12xx_ops = {
1663 .setup = wl12xx_setup,
1664 .identify_chip = wl12xx_identify_chip,
1665 .boot = wl12xx_boot,
1666 .plt_init = wl12xx_plt_init,
1667 .trigger_cmd = wl12xx_trigger_cmd,
1668 .ack_event = wl12xx_ack_event,
1669 .wait_for_event = wl12xx_wait_for_event,
1670 .process_mailbox_events = wl12xx_process_mailbox_events,
1671 .calc_tx_blocks = wl12xx_calc_tx_blocks,
1672 .set_tx_desc_blocks = wl12xx_set_tx_desc_blocks,
1673 .set_tx_desc_data_len = wl12xx_set_tx_desc_data_len,
1674 .get_rx_buf_align = wl12xx_get_rx_buf_align,
1675 .get_rx_packet_len = wl12xx_get_rx_packet_len,
1676 .tx_immediate_compl = NULL,
1677 .tx_delayed_compl = wl12xx_tx_delayed_compl,
1678 .hw_init = wl12xx_hw_init,
1679 .init_vif = NULL,
1680 .sta_get_ap_rate_mask = wl12xx_sta_get_ap_rate_mask,
1681 .get_pg_ver = wl12xx_get_pg_ver,
1682 .get_mac = wl12xx_get_mac,
1683 .set_tx_desc_csum = wl12xx_set_tx_desc_csum,
1684 .set_rx_csum = NULL,
1685 .ap_get_mimo_wide_rate_mask = NULL,
1686 .debugfs_init = wl12xx_debugfs_add_files,
1687 .scan_start = wl12xx_scan_start,
1688 .scan_stop = wl12xx_scan_stop,
1689 .sched_scan_start = wl12xx_sched_scan_start,
1690 .sched_scan_stop = wl12xx_scan_sched_scan_stop,
1691 .get_spare_blocks = wl12xx_get_spare_blocks,
1692 .set_key = wl12xx_set_key,
1693 .channel_switch = wl12xx_cmd_channel_switch,
1694 .pre_pkt_send = NULL,
1695 .set_peer_cap = wl12xx_set_peer_cap,
1696 .convert_hwaddr = wl12xx_convert_hwaddr,
1697 .lnk_high_prio = wl12xx_lnk_high_prio,
1698 .lnk_low_prio = wl12xx_lnk_low_prio,
1699 };
1700
1701 static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
1702 .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
1703 (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT),
1704 .ht_supported = true,
1705 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K,
1706 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8,
1707 .mcs = {
1708 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
1709 .rx_highest = cpu_to_le16(72),
1710 .tx_params = IEEE80211_HT_MCS_TX_DEFINED,
1711 },
1712 };
1713
1714 static int wl12xx_setup(struct wl1271 *wl)
1715 {
1716 struct wl12xx_priv *priv = wl->priv;
1717 struct wlcore_platdev_data *pdev_data = dev_get_platdata(&wl->pdev->dev);
1718 struct wl12xx_platform_data *pdata = pdev_data->pdata;
1719
1720 wl->rtable = wl12xx_rtable;
1721 wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
1722 wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
1723 wl->num_channels = 1;
1724 wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
1725 wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
1726 wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
1727 wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
1728 wl->fw_status_priv_len = 0;
1729 wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
1730 wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
1731 wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap);
1732 wl12xx_conf_init(wl);
1733
1734 if (!fref_param) {
1735 priv->ref_clock = pdata->board_ref_clock;
1736 } else {
1737 if (!strcmp(fref_param, "19.2"))
1738 priv->ref_clock = WL12XX_REFCLOCK_19;
1739 else if (!strcmp(fref_param, "26"))
1740 priv->ref_clock = WL12XX_REFCLOCK_26;
1741 else if (!strcmp(fref_param, "26x"))
1742 priv->ref_clock = WL12XX_REFCLOCK_26_XTAL;
1743 else if (!strcmp(fref_param, "38.4"))
1744 priv->ref_clock = WL12XX_REFCLOCK_38;
1745 else if (!strcmp(fref_param, "38.4x"))
1746 priv->ref_clock = WL12XX_REFCLOCK_38_XTAL;
1747 else if (!strcmp(fref_param, "52"))
1748 priv->ref_clock = WL12XX_REFCLOCK_52;
1749 else
1750 wl1271_error("Invalid fref parameter %s", fref_param);
1751 }
1752
1753 if (!tcxo_param) {
1754 priv->tcxo_clock = pdata->board_tcxo_clock;
1755 } else {
1756 if (!strcmp(tcxo_param, "19.2"))
1757 priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
1758 else if (!strcmp(tcxo_param, "26"))
1759 priv->tcxo_clock = WL12XX_TCXOCLOCK_26;
1760 else if (!strcmp(tcxo_param, "38.4"))
1761 priv->tcxo_clock = WL12XX_TCXOCLOCK_38_4;
1762 else if (!strcmp(tcxo_param, "52"))
1763 priv->tcxo_clock = WL12XX_TCXOCLOCK_52;
1764 else if (!strcmp(tcxo_param, "16.368"))
1765 priv->tcxo_clock = WL12XX_TCXOCLOCK_16_368;
1766 else if (!strcmp(tcxo_param, "32.736"))
1767 priv->tcxo_clock = WL12XX_TCXOCLOCK_32_736;
1768 else if (!strcmp(tcxo_param, "16.8"))
1769 priv->tcxo_clock = WL12XX_TCXOCLOCK_16_8;
1770 else if (!strcmp(tcxo_param, "33.6"))
1771 priv->tcxo_clock = WL12XX_TCXOCLOCK_33_6;
1772 else
1773 wl1271_error("Invalid tcxo parameter %s", tcxo_param);
1774 }
1775
1776 priv->rx_mem_addr = kmalloc(sizeof(*priv->rx_mem_addr), GFP_KERNEL);
1777 if (!priv->rx_mem_addr)
1778 return -ENOMEM;
1779
1780 return 0;
1781 }
1782
1783 static int wl12xx_probe(struct platform_device *pdev)
1784 {
1785 struct wl1271 *wl;
1786 struct ieee80211_hw *hw;
1787 int ret;
1788
1789 hw = wlcore_alloc_hw(sizeof(struct wl12xx_priv),
1790 WL12XX_AGGR_BUFFER_SIZE,
1791 sizeof(struct wl12xx_event_mailbox));
1792 if (IS_ERR(hw)) {
1793 wl1271_error("can't allocate hw");
1794 ret = PTR_ERR(hw);
1795 goto out;
1796 }
1797
1798 wl = hw->priv;
1799 wl->ops = &wl12xx_ops;
1800 wl->ptable = wl12xx_ptable;
1801 ret = wlcore_probe(wl, pdev);
1802 if (ret)
1803 goto out_free;
1804
1805 return ret;
1806
1807 out_free:
1808 wlcore_free_hw(wl);
1809 out:
1810 return ret;
1811 }
1812
1813 static int wl12xx_remove(struct platform_device *pdev)
1814 {
1815 struct wl1271 *wl = platform_get_drvdata(pdev);
1816 struct wl12xx_priv *priv;
1817
1818 if (!wl)
1819 goto out;
1820 priv = wl->priv;
1821
1822 kfree(priv->rx_mem_addr);
1823
1824 out:
1825 return wlcore_remove(pdev);
1826 }
1827
1828 static const struct platform_device_id wl12xx_id_table[] = {
1829 { "wl12xx", 0 },
1830 { } /* Terminating Entry */
1831 };
1832 MODULE_DEVICE_TABLE(platform, wl12xx_id_table);
1833
1834 static struct platform_driver wl12xx_driver = {
1835 .probe = wl12xx_probe,
1836 .remove = wl12xx_remove,
1837 .id_table = wl12xx_id_table,
1838 .driver = {
1839 .name = "wl12xx_driver",
1840 .owner = THIS_MODULE,
1841 }
1842 };
1843
1844 module_platform_driver(wl12xx_driver);
1845
1846 module_param_named(fref, fref_param, charp, 0);
1847 MODULE_PARM_DESC(fref, "FREF clock: 19.2, 26, 26x, 38.4, 38.4x, 52");
1848
1849 module_param_named(tcxo, tcxo_param, charp, 0);
1850 MODULE_PARM_DESC(tcxo,
1851 "TCXO clock: 19.2, 26, 38.4, 52, 16.368, 32.736, 16.8, 33.6");
1852
1853 MODULE_LICENSE("GPL v2");
1854 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
1855 MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE);
1856 MODULE_FIRMWARE(WL127X_FW_NAME_MULTI);
1857 MODULE_FIRMWARE(WL127X_PLT_FW_NAME);
1858 MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE);
1859 MODULE_FIRMWARE(WL128X_FW_NAME_MULTI);
1860 MODULE_FIRMWARE(WL128X_PLT_FW_NAME);
Linux with added FPC-III support