2 * Adaptec AAC series RAID controller driver
3 * (c) Copyright 2001 Red Hat Inc.
5 * based on the old aacraid driver that is..
6 * Adaptec aacraid device driver for Linux.
8 * Copyright (c) 2000-2010 Adaptec, Inc.
9 * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; see the file COPYING. If not, write to
23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27 #include <linux/kernel.h>
28 #include <linux/init.h>
29 #include <linux/types.h>
30 #include <linux/pci.h>
31 #include <linux/spinlock.h>
32 #include <linux/slab.h>
33 #include <linux/completion.h>
34 #include <linux/blkdev.h>
35 #include <asm/uaccess.h>
36 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
37 #include <linux/module.h>
39 #include <scsi/scsi.h>
40 #include <scsi/scsi_cmnd.h>
41 #include <scsi/scsi_device.h>
42 #include <scsi/scsi_host.h>
46 /* values for inqd_pdt: Peripheral device type in plain English */
47 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
48 #define INQD_PDT_PROC 0x03 /* Processor device */
49 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
50 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
51 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
52 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
54 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
55 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
61 #define SENCODE_NO_SENSE 0x00
62 #define SENCODE_END_OF_DATA 0x00
63 #define SENCODE_BECOMING_READY 0x04
64 #define SENCODE_INIT_CMD_REQUIRED 0x04
65 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
66 #define SENCODE_INVALID_COMMAND 0x20
67 #define SENCODE_LBA_OUT_OF_RANGE 0x21
68 #define SENCODE_INVALID_CDB_FIELD 0x24
69 #define SENCODE_LUN_NOT_SUPPORTED 0x25
70 #define SENCODE_INVALID_PARAM_FIELD 0x26
71 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
72 #define SENCODE_PARAM_VALUE_INVALID 0x26
73 #define SENCODE_RESET_OCCURRED 0x29
74 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
75 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
76 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
77 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
78 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
79 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
80 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
81 #define SENCODE_OVERLAPPED_COMMAND 0x4E
84 * Additional sense codes
87 #define ASENCODE_NO_SENSE 0x00
88 #define ASENCODE_END_OF_DATA 0x05
89 #define ASENCODE_BECOMING_READY 0x01
90 #define ASENCODE_INIT_CMD_REQUIRED 0x02
91 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
92 #define ASENCODE_INVALID_COMMAND 0x00
93 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
94 #define ASENCODE_INVALID_CDB_FIELD 0x00
95 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
96 #define ASENCODE_INVALID_PARAM_FIELD 0x00
97 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
98 #define ASENCODE_PARAM_VALUE_INVALID 0x02
99 #define ASENCODE_RESET_OCCURRED 0x00
100 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
101 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
102 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
103 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
104 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
105 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
106 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
107 #define ASENCODE_OVERLAPPED_COMMAND 0x00
109 #define BYTE0(x) (unsigned char)(x)
110 #define BYTE1(x) (unsigned char)((x) >> 8)
111 #define BYTE2(x) (unsigned char)((x) >> 16)
112 #define BYTE3(x) (unsigned char)((x) >> 24)
114 /*------------------------------------------------------------------------------
115 * S T R U C T S / T Y P E D E F S
116 *----------------------------------------------------------------------------*/
117 /* SCSI inquiry data */
118 struct inquiry_data
{
119 u8 inqd_pdt
; /* Peripheral qualifier | Peripheral Device Type */
120 u8 inqd_dtq
; /* RMB | Device Type Qualifier */
121 u8 inqd_ver
; /* ISO version | ECMA version | ANSI-approved version */
122 u8 inqd_rdf
; /* AENC | TrmIOP | Response data format */
123 u8 inqd_len
; /* Additional length (n-4) */
124 u8 inqd_pad1
[2];/* Reserved - must be zero */
125 u8 inqd_pad2
; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
126 u8 inqd_vid
[8]; /* Vendor ID */
127 u8 inqd_pid
[16];/* Product ID */
128 u8 inqd_prl
[4]; /* Product Revision Level */
132 * M O D U L E G L O B A L S
135 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*sgmap
);
136 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
);
137 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
);
138 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
139 struct aac_raw_io2
*rio2
, int sg_max
);
140 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
,
141 int pages
, int nseg
, int nseg_new
);
142 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
);
143 #ifdef AAC_DETAILED_STATUS_INFO
144 static char *aac_get_status_string(u32 status
);
148 * Non dasd selection is handled entirely in aachba now
151 static int nondasd
= -1;
152 static int aac_cache
= 2; /* WCE=0 to avoid performance problems */
153 static int dacmode
= -1;
156 int startup_timeout
= 180;
157 int aif_timeout
= 120;
158 int aac_sync_mode
; /* Only Sync. transfer - disabled */
159 int aac_convert_sgl
= 1; /* convert non-conformable s/g list - enabled */
161 module_param(aac_sync_mode
, int, S_IRUGO
|S_IWUSR
);
162 MODULE_PARM_DESC(aac_sync_mode
, "Force sync. transfer mode"
164 module_param(aac_convert_sgl
, int, S_IRUGO
|S_IWUSR
);
165 MODULE_PARM_DESC(aac_convert_sgl
, "Convert non-conformable s/g list"
167 module_param(nondasd
, int, S_IRUGO
|S_IWUSR
);
168 MODULE_PARM_DESC(nondasd
, "Control scanning of hba for nondasd devices."
170 module_param_named(cache
, aac_cache
, int, S_IRUGO
|S_IWUSR
);
171 MODULE_PARM_DESC(cache
, "Disable Queue Flush commands:\n"
172 "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
173 "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
174 "\tbit 2 - Disable only if Battery is protecting Cache");
175 module_param(dacmode
, int, S_IRUGO
|S_IWUSR
);
176 MODULE_PARM_DESC(dacmode
, "Control whether dma addressing is using 64 bit DAC."
178 module_param_named(commit
, aac_commit
, int, S_IRUGO
|S_IWUSR
);
179 MODULE_PARM_DESC(commit
, "Control whether a COMMIT_CONFIG is issued to the"
180 " adapter for foreign arrays.\n"
181 "This is typically needed in systems that do not have a BIOS."
183 module_param_named(msi
, aac_msi
, int, S_IRUGO
|S_IWUSR
);
184 MODULE_PARM_DESC(msi
, "IRQ handling."
185 " 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
186 module_param(startup_timeout
, int, S_IRUGO
|S_IWUSR
);
187 MODULE_PARM_DESC(startup_timeout
, "The duration of time in seconds to wait for"
188 " adapter to have it's kernel up and\n"
189 "running. This is typically adjusted for large systems that do not"
191 module_param(aif_timeout
, int, S_IRUGO
|S_IWUSR
);
192 MODULE_PARM_DESC(aif_timeout
, "The duration of time in seconds to wait for"
193 " applications to pick up AIFs before\n"
194 "deregistering them. This is typically adjusted for heavily burdened"
198 module_param(numacb
, int, S_IRUGO
|S_IWUSR
);
199 MODULE_PARM_DESC(numacb
, "Request a limit to the number of adapter control"
200 " blocks (FIB) allocated. Valid values are 512 and down. Default is"
201 " to use suggestion from Firmware.");
204 module_param(acbsize
, int, S_IRUGO
|S_IWUSR
);
205 MODULE_PARM_DESC(acbsize
, "Request a specific adapter control block (FIB)"
206 " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
207 " suggestion from Firmware.");
209 int update_interval
= 30 * 60;
210 module_param(update_interval
, int, S_IRUGO
|S_IWUSR
);
211 MODULE_PARM_DESC(update_interval
, "Interval in seconds between time sync"
212 " updates issued to adapter.");
214 int check_interval
= 24 * 60 * 60;
215 module_param(check_interval
, int, S_IRUGO
|S_IWUSR
);
216 MODULE_PARM_DESC(check_interval
, "Interval in seconds between adapter health"
219 int aac_check_reset
= 1;
220 module_param_named(check_reset
, aac_check_reset
, int, S_IRUGO
|S_IWUSR
);
221 MODULE_PARM_DESC(check_reset
, "If adapter fails health check, reset the"
222 " adapter. a value of -1 forces the reset to adapters programmed to"
225 int expose_physicals
= -1;
226 module_param(expose_physicals
, int, S_IRUGO
|S_IWUSR
);
227 MODULE_PARM_DESC(expose_physicals
, "Expose physical components of the arrays."
228 " -1=protect 0=off, 1=on");
230 int aac_reset_devices
;
231 module_param_named(reset_devices
, aac_reset_devices
, int, S_IRUGO
|S_IWUSR
);
232 MODULE_PARM_DESC(reset_devices
, "Force an adapter reset at initialization.");
235 module_param_named(wwn
, aac_wwn
, int, S_IRUGO
|S_IWUSR
);
236 MODULE_PARM_DESC(wwn
, "Select a WWN type for the arrays:\n"
238 "\t1 - Array Meta Data Signature (default)\n"
239 "\t2 - Adapter Serial Number");
242 static inline int aac_valid_context(struct scsi_cmnd
*scsicmd
,
243 struct fib
*fibptr
) {
244 struct scsi_device
*device
;
246 if (unlikely(!scsicmd
|| !scsicmd
->scsi_done
)) {
247 dprintk((KERN_WARNING
"aac_valid_context: scsi command corrupt\n"));
248 aac_fib_complete(fibptr
);
249 aac_fib_free(fibptr
);
252 scsicmd
->SCp
.phase
= AAC_OWNER_MIDLEVEL
;
253 device
= scsicmd
->device
;
254 if (unlikely(!device
|| !scsi_device_online(device
))) {
255 dprintk((KERN_WARNING
"aac_valid_context: scsi device corrupt\n"));
256 aac_fib_complete(fibptr
);
257 aac_fib_free(fibptr
);
264 * aac_get_config_status - check the adapter configuration
265 * @common: adapter to query
267 * Query config status, and commit the configuration if needed.
269 int aac_get_config_status(struct aac_dev
*dev
, int commit_flag
)
274 if (!(fibptr
= aac_fib_alloc(dev
)))
277 aac_fib_init(fibptr
);
279 struct aac_get_config_status
*dinfo
;
280 dinfo
= (struct aac_get_config_status
*) fib_data(fibptr
);
282 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
283 dinfo
->type
= cpu_to_le32(CT_GET_CONFIG_STATUS
);
284 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_config_status_resp
*)NULL
)->data
));
287 status
= aac_fib_send(ContainerCommand
,
289 sizeof (struct aac_get_config_status
),
294 printk(KERN_WARNING
"aac_get_config_status: SendFIB failed.\n");
296 struct aac_get_config_status_resp
*reply
297 = (struct aac_get_config_status_resp
*) fib_data(fibptr
);
298 dprintk((KERN_WARNING
299 "aac_get_config_status: response=%d status=%d action=%d\n",
300 le32_to_cpu(reply
->response
),
301 le32_to_cpu(reply
->status
),
302 le32_to_cpu(reply
->data
.action
)));
303 if ((le32_to_cpu(reply
->response
) != ST_OK
) ||
304 (le32_to_cpu(reply
->status
) != CT_OK
) ||
305 (le32_to_cpu(reply
->data
.action
) > CFACT_PAUSE
)) {
306 printk(KERN_WARNING
"aac_get_config_status: Will not issue the Commit Configuration\n");
310 /* Do not set XferState to zero unless receives a response from F/W */
312 aac_fib_complete(fibptr
);
314 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
316 if ((aac_commit
== 1) || commit_flag
) {
317 struct aac_commit_config
* dinfo
;
318 aac_fib_init(fibptr
);
319 dinfo
= (struct aac_commit_config
*) fib_data(fibptr
);
321 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
322 dinfo
->type
= cpu_to_le32(CT_COMMIT_CONFIG
);
324 status
= aac_fib_send(ContainerCommand
,
326 sizeof (struct aac_commit_config
),
330 /* Do not set XferState to zero unless
331 * receives a response from F/W */
333 aac_fib_complete(fibptr
);
334 } else if (aac_commit
== 0) {
336 "aac_get_config_status: Foreign device configurations are being ignored\n");
339 /* FIB should be freed only after getting the response from the F/W */
340 if (status
!= -ERESTARTSYS
)
341 aac_fib_free(fibptr
);
345 static void aac_expose_phy_device(struct scsi_cmnd
*scsicmd
)
348 scsi_sg_copy_to_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
349 if ((inq_data
& 0x20) && (inq_data
& 0x1f) == TYPE_DISK
) {
351 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
356 * aac_get_containers - list containers
357 * @common: adapter to probe
359 * Make a list of all containers on this controller
361 int aac_get_containers(struct aac_dev
*dev
)
363 struct fsa_dev_info
*fsa_dev_ptr
;
367 struct aac_get_container_count
*dinfo
;
368 struct aac_get_container_count_resp
*dresp
;
369 int maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
371 if (!(fibptr
= aac_fib_alloc(dev
)))
374 aac_fib_init(fibptr
);
375 dinfo
= (struct aac_get_container_count
*) fib_data(fibptr
);
376 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
377 dinfo
->type
= cpu_to_le32(CT_GET_CONTAINER_COUNT
);
379 status
= aac_fib_send(ContainerCommand
,
381 sizeof (struct aac_get_container_count
),
386 dresp
= (struct aac_get_container_count_resp
*)fib_data(fibptr
);
387 maximum_num_containers
= le32_to_cpu(dresp
->ContainerSwitchEntries
);
388 aac_fib_complete(fibptr
);
390 /* FIB should be freed only after getting the response from the F/W */
391 if (status
!= -ERESTARTSYS
)
392 aac_fib_free(fibptr
);
394 if (maximum_num_containers
< MAXIMUM_NUM_CONTAINERS
)
395 maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
396 fsa_dev_ptr
= kzalloc(sizeof(*fsa_dev_ptr
) * maximum_num_containers
,
401 dev
->fsa_dev
= fsa_dev_ptr
;
402 dev
->maximum_num_containers
= maximum_num_containers
;
404 for (index
= 0; index
< dev
->maximum_num_containers
; ) {
405 fsa_dev_ptr
[index
].devname
[0] = '\0';
407 status
= aac_probe_container(dev
, index
);
410 printk(KERN_WARNING
"aac_get_containers: SendFIB failed.\n");
415 * If there are no more containers, then stop asking.
417 if (++index
>= status
)
423 static void get_container_name_callback(void *context
, struct fib
* fibptr
)
425 struct aac_get_name_resp
* get_name_reply
;
426 struct scsi_cmnd
* scsicmd
;
428 scsicmd
= (struct scsi_cmnd
*) context
;
430 if (!aac_valid_context(scsicmd
, fibptr
))
433 dprintk((KERN_DEBUG
"get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies
));
434 BUG_ON(fibptr
== NULL
);
436 get_name_reply
= (struct aac_get_name_resp
*) fib_data(fibptr
);
437 /* Failure is irrelevant, using default value instead */
438 if ((le32_to_cpu(get_name_reply
->status
) == CT_OK
)
439 && (get_name_reply
->data
[0] != '\0')) {
440 char *sp
= get_name_reply
->data
;
441 sp
[sizeof(((struct aac_get_name_resp
*)NULL
)->data
)-1] = '\0';
445 struct inquiry_data inq
;
446 char d
[sizeof(((struct inquiry_data
*)NULL
)->inqd_pid
)];
447 int count
= sizeof(d
);
450 *dp
++ = (*sp
) ? *sp
++ : ' ';
451 } while (--count
> 0);
453 scsi_sg_copy_to_buffer(scsicmd
, &inq
, sizeof(inq
));
454 memcpy(inq
.inqd_pid
, d
, sizeof(d
));
455 scsi_sg_copy_from_buffer(scsicmd
, &inq
, sizeof(inq
));
459 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
461 aac_fib_complete(fibptr
);
462 aac_fib_free(fibptr
);
463 scsicmd
->scsi_done(scsicmd
);
467 * aac_get_container_name - get container name, none blocking.
469 static int aac_get_container_name(struct scsi_cmnd
* scsicmd
)
472 struct aac_get_name
*dinfo
;
473 struct fib
* cmd_fibcontext
;
474 struct aac_dev
* dev
;
476 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
478 if (!(cmd_fibcontext
= aac_fib_alloc(dev
)))
481 aac_fib_init(cmd_fibcontext
);
482 dinfo
= (struct aac_get_name
*) fib_data(cmd_fibcontext
);
484 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
485 dinfo
->type
= cpu_to_le32(CT_READ_NAME
);
486 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
487 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_name_resp
*)NULL
)->data
));
489 status
= aac_fib_send(ContainerCommand
,
491 sizeof (struct aac_get_name
),
494 (fib_callback
)get_container_name_callback
,
498 * Check that the command queued to the controller
500 if (status
== -EINPROGRESS
) {
501 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
505 printk(KERN_WARNING
"aac_get_container_name: aac_fib_send failed with status: %d.\n", status
);
506 aac_fib_complete(cmd_fibcontext
);
507 aac_fib_free(cmd_fibcontext
);
511 static int aac_probe_container_callback2(struct scsi_cmnd
* scsicmd
)
513 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
515 if ((fsa_dev_ptr
[scmd_id(scsicmd
)].valid
& 1))
516 return aac_scsi_cmd(scsicmd
);
518 scsicmd
->result
= DID_NO_CONNECT
<< 16;
519 scsicmd
->scsi_done(scsicmd
);
523 static void _aac_probe_container2(void * context
, struct fib
* fibptr
)
525 struct fsa_dev_info
*fsa_dev_ptr
;
526 int (*callback
)(struct scsi_cmnd
*);
527 struct scsi_cmnd
* scsicmd
= (struct scsi_cmnd
*)context
;
530 if (!aac_valid_context(scsicmd
, fibptr
))
533 scsicmd
->SCp
.Status
= 0;
534 fsa_dev_ptr
= fibptr
->dev
->fsa_dev
;
536 struct aac_mount
* dresp
= (struct aac_mount
*) fib_data(fibptr
);
537 fsa_dev_ptr
+= scmd_id(scsicmd
);
539 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
540 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
) &&
541 (le32_to_cpu(dresp
->mnt
[0].state
) != FSCS_HIDDEN
)) {
542 fsa_dev_ptr
->valid
= 1;
543 /* sense_key holds the current state of the spin-up */
544 if (dresp
->mnt
[0].state
& cpu_to_le32(FSCS_NOT_READY
))
545 fsa_dev_ptr
->sense_data
.sense_key
= NOT_READY
;
546 else if (fsa_dev_ptr
->sense_data
.sense_key
== NOT_READY
)
547 fsa_dev_ptr
->sense_data
.sense_key
= NO_SENSE
;
548 fsa_dev_ptr
->type
= le32_to_cpu(dresp
->mnt
[0].vol
);
550 = ((u64
)le32_to_cpu(dresp
->mnt
[0].capacity
)) +
551 (((u64
)le32_to_cpu(dresp
->mnt
[0].capacityhigh
)) << 32);
552 fsa_dev_ptr
->ro
= ((le32_to_cpu(dresp
->mnt
[0].state
) & FSCS_READONLY
) != 0);
554 if ((fsa_dev_ptr
->valid
& 1) == 0)
555 fsa_dev_ptr
->valid
= 0;
556 scsicmd
->SCp
.Status
= le32_to_cpu(dresp
->count
);
558 aac_fib_complete(fibptr
);
559 aac_fib_free(fibptr
);
560 callback
= (int (*)(struct scsi_cmnd
*))(scsicmd
->SCp
.ptr
);
561 scsicmd
->SCp
.ptr
= NULL
;
562 (*callback
)(scsicmd
);
566 static void _aac_probe_container1(void * context
, struct fib
* fibptr
)
568 struct scsi_cmnd
* scsicmd
;
569 struct aac_mount
* dresp
;
570 struct aac_query_mount
*dinfo
;
573 dresp
= (struct aac_mount
*) fib_data(fibptr
);
574 dresp
->mnt
[0].capacityhigh
= 0;
575 if ((le32_to_cpu(dresp
->status
) != ST_OK
) ||
576 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
)) {
577 _aac_probe_container2(context
, fibptr
);
580 scsicmd
= (struct scsi_cmnd
*) context
;
582 if (!aac_valid_context(scsicmd
, fibptr
))
585 aac_fib_init(fibptr
);
587 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
589 dinfo
->command
= cpu_to_le32(VM_NameServe64
);
590 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
591 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
593 status
= aac_fib_send(ContainerCommand
,
595 sizeof(struct aac_query_mount
),
598 _aac_probe_container2
,
601 * Check that the command queued to the controller
603 if (status
== -EINPROGRESS
)
604 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
605 else if (status
< 0) {
606 /* Inherit results from VM_NameServe, if any */
607 dresp
->status
= cpu_to_le32(ST_OK
);
608 _aac_probe_container2(context
, fibptr
);
612 static int _aac_probe_container(struct scsi_cmnd
* scsicmd
, int (*callback
)(struct scsi_cmnd
*))
615 int status
= -ENOMEM
;
617 if ((fibptr
= aac_fib_alloc((struct aac_dev
*)scsicmd
->device
->host
->hostdata
))) {
618 struct aac_query_mount
*dinfo
;
620 aac_fib_init(fibptr
);
622 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
624 dinfo
->command
= cpu_to_le32(VM_NameServe
);
625 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
626 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
627 scsicmd
->SCp
.ptr
= (char *)callback
;
629 status
= aac_fib_send(ContainerCommand
,
631 sizeof(struct aac_query_mount
),
634 _aac_probe_container1
,
637 * Check that the command queued to the controller
639 if (status
== -EINPROGRESS
) {
640 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
644 scsicmd
->SCp
.ptr
= NULL
;
645 aac_fib_complete(fibptr
);
646 aac_fib_free(fibptr
);
650 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
652 fsa_dev_ptr
+= scmd_id(scsicmd
);
653 if ((fsa_dev_ptr
->valid
& 1) == 0) {
654 fsa_dev_ptr
->valid
= 0;
655 return (*callback
)(scsicmd
);
663 * aac_probe_container - query a logical volume
664 * @dev: device to query
665 * @cid: container identifier
667 * Queries the controller about the given volume. The volume information
668 * is updated in the struct fsa_dev_info structure rather than returned.
670 static int aac_probe_container_callback1(struct scsi_cmnd
* scsicmd
)
672 scsicmd
->device
= NULL
;
676 int aac_probe_container(struct aac_dev
*dev
, int cid
)
678 struct scsi_cmnd
*scsicmd
= kmalloc(sizeof(*scsicmd
), GFP_KERNEL
);
679 struct scsi_device
*scsidev
= kmalloc(sizeof(*scsidev
), GFP_KERNEL
);
682 if (!scsicmd
|| !scsidev
) {
687 scsicmd
->list
.next
= NULL
;
688 scsicmd
->scsi_done
= (void (*)(struct scsi_cmnd
*))aac_probe_container_callback1
;
690 scsicmd
->device
= scsidev
;
691 scsidev
->sdev_state
= 0;
693 scsidev
->host
= dev
->scsi_host_ptr
;
695 if (_aac_probe_container(scsicmd
, aac_probe_container_callback1
) == 0)
696 while (scsicmd
->device
== scsidev
)
699 status
= scsicmd
->SCp
.Status
;
704 /* Local Structure to set SCSI inquiry data strings */
706 char vid
[8]; /* Vendor ID */
707 char pid
[16]; /* Product ID */
708 char prl
[4]; /* Product Revision Level */
712 * InqStrCopy - string merge
713 * @a: string to copy from
714 * @b: string to copy to
716 * Copy a String from one location to another
720 static void inqstrcpy(char *a
, char *b
)
723 while (*a
!= (char)0)
727 static char *container_types
[] = {
751 char * get_container_type(unsigned tindex
)
753 if (tindex
>= ARRAY_SIZE(container_types
))
754 tindex
= ARRAY_SIZE(container_types
) - 1;
755 return container_types
[tindex
];
758 /* Function: setinqstr
760 * Arguments: [1] pointer to void [1] int
762 * Purpose: Sets SCSI inquiry data strings for vendor, product
763 * and revision level. Allows strings to be set in platform dependent
764 * files instead of in OS dependent driver source.
767 static void setinqstr(struct aac_dev
*dev
, void *data
, int tindex
)
769 struct scsi_inq
*str
;
771 str
= (struct scsi_inq
*)(data
); /* cast data to scsi inq block */
772 memset(str
, ' ', sizeof(*str
));
774 if (dev
->supplement_adapter_info
.AdapterTypeText
[0]) {
775 char * cp
= dev
->supplement_adapter_info
.AdapterTypeText
;
777 if ((cp
[0] == 'A') && (cp
[1] == 'O') && (cp
[2] == 'C'))
778 inqstrcpy("SMC", str
->vid
);
780 c
= sizeof(str
->vid
);
781 while (*cp
&& *cp
!= ' ' && --c
)
785 inqstrcpy (dev
->supplement_adapter_info
.AdapterTypeText
,
788 while (*cp
&& *cp
!= ' ')
793 /* last six chars reserved for vol type */
795 if (strlen(cp
) > sizeof(str
->pid
)) {
796 c
= cp
[sizeof(str
->pid
)];
797 cp
[sizeof(str
->pid
)] = '\0';
799 inqstrcpy (cp
, str
->pid
);
801 cp
[sizeof(str
->pid
)] = c
;
803 struct aac_driver_ident
*mp
= aac_get_driver_ident(dev
->cardtype
);
805 inqstrcpy (mp
->vname
, str
->vid
);
806 /* last six chars reserved for vol type */
807 inqstrcpy (mp
->model
, str
->pid
);
810 if (tindex
< ARRAY_SIZE(container_types
)){
811 char *findit
= str
->pid
;
813 for ( ; *findit
!= ' '; findit
++); /* walk till we find a space */
814 /* RAID is superfluous in the context of a RAID device */
815 if (memcmp(findit
-4, "RAID", 4) == 0)
816 *(findit
-= 4) = ' ';
817 if (((findit
- str
->pid
) + strlen(container_types
[tindex
]))
818 < (sizeof(str
->pid
) + sizeof(str
->prl
)))
819 inqstrcpy (container_types
[tindex
], findit
+ 1);
821 inqstrcpy ("V1.0", str
->prl
);
824 static void get_container_serial_callback(void *context
, struct fib
* fibptr
)
826 struct aac_get_serial_resp
* get_serial_reply
;
827 struct scsi_cmnd
* scsicmd
;
829 BUG_ON(fibptr
== NULL
);
831 scsicmd
= (struct scsi_cmnd
*) context
;
832 if (!aac_valid_context(scsicmd
, fibptr
))
835 get_serial_reply
= (struct aac_get_serial_resp
*) fib_data(fibptr
);
836 /* Failure is irrelevant, using default value instead */
837 if (le32_to_cpu(get_serial_reply
->status
) == CT_OK
) {
841 sp
[1] = scsicmd
->cmnd
[2];
843 sp
[3] = snprintf(sp
+4, sizeof(sp
)-4, "%08X",
844 le32_to_cpu(get_serial_reply
->uid
));
845 scsi_sg_copy_from_buffer(scsicmd
, sp
, sizeof(sp
));
848 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
850 aac_fib_complete(fibptr
);
851 aac_fib_free(fibptr
);
852 scsicmd
->scsi_done(scsicmd
);
856 * aac_get_container_serial - get container serial, none blocking.
858 static int aac_get_container_serial(struct scsi_cmnd
* scsicmd
)
861 struct aac_get_serial
*dinfo
;
862 struct fib
* cmd_fibcontext
;
863 struct aac_dev
* dev
;
865 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
867 if (!(cmd_fibcontext
= aac_fib_alloc(dev
)))
870 aac_fib_init(cmd_fibcontext
);
871 dinfo
= (struct aac_get_serial
*) fib_data(cmd_fibcontext
);
873 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
874 dinfo
->type
= cpu_to_le32(CT_CID_TO_32BITS_UID
);
875 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
877 status
= aac_fib_send(ContainerCommand
,
879 sizeof (struct aac_get_serial
),
882 (fib_callback
) get_container_serial_callback
,
886 * Check that the command queued to the controller
888 if (status
== -EINPROGRESS
) {
889 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
893 printk(KERN_WARNING
"aac_get_container_serial: aac_fib_send failed with status: %d.\n", status
);
894 aac_fib_complete(cmd_fibcontext
);
895 aac_fib_free(cmd_fibcontext
);
899 /* Function: setinqserial
901 * Arguments: [1] pointer to void [1] int
903 * Purpose: Sets SCSI Unit Serial number.
904 * This is a fake. We should read a proper
905 * serial number from the container. <SuSE>But
906 * without docs it's quite hard to do it :-)
907 * So this will have to do in the meantime.</SuSE>
910 static int setinqserial(struct aac_dev
*dev
, void *data
, int cid
)
913 * This breaks array migration.
915 return snprintf((char *)(data
), sizeof(struct scsi_inq
) - 4, "%08X%02X",
916 le32_to_cpu(dev
->adapter_info
.serial
[0]), cid
);
919 static inline void set_sense(struct sense_data
*sense_data
, u8 sense_key
,
920 u8 sense_code
, u8 a_sense_code
, u8 bit_pointer
, u16 field_pointer
)
922 u8
*sense_buf
= (u8
*)sense_data
;
923 /* Sense data valid, err code 70h */
924 sense_buf
[0] = 0x70; /* No info field */
925 sense_buf
[1] = 0; /* Segment number, always zero */
927 sense_buf
[2] = sense_key
; /* Sense key */
929 sense_buf
[12] = sense_code
; /* Additional sense code */
930 sense_buf
[13] = a_sense_code
; /* Additional sense code qualifier */
932 if (sense_key
== ILLEGAL_REQUEST
) {
933 sense_buf
[7] = 10; /* Additional sense length */
935 sense_buf
[15] = bit_pointer
;
936 /* Illegal parameter is in the parameter block */
937 if (sense_code
== SENCODE_INVALID_CDB_FIELD
)
938 sense_buf
[15] |= 0xc0;/* Std sense key specific field */
939 /* Illegal parameter is in the CDB block */
940 sense_buf
[16] = field_pointer
>> 8; /* MSB */
941 sense_buf
[17] = field_pointer
; /* LSB */
943 sense_buf
[7] = 6; /* Additional sense length */
946 static int aac_bounds_32(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
948 if (lba
& 0xffffffff00000000LL
) {
949 int cid
= scmd_id(cmd
);
950 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
951 cmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
952 SAM_STAT_CHECK_CONDITION
;
953 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
954 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
955 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
956 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
957 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
958 SCSI_SENSE_BUFFERSIZE
));
965 static int aac_bounds_64(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
970 static void io_callback(void *context
, struct fib
* fibptr
);
972 static int aac_read_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
974 struct aac_dev
*dev
= fib
->dev
;
975 u16 fibsize
, command
;
979 if (dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
&& !dev
->sync_mode
) {
980 struct aac_raw_io2
*readcmd2
;
981 readcmd2
= (struct aac_raw_io2
*) fib_data(fib
);
982 memset(readcmd2
, 0, sizeof(struct aac_raw_io2
));
983 readcmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
984 readcmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
985 readcmd2
->byteCount
= cpu_to_le32(count
<<9);
986 readcmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
987 readcmd2
->flags
= cpu_to_le16(RIO2_IO_TYPE_READ
);
988 ret
= aac_build_sgraw2(cmd
, readcmd2
,
989 dev
->scsi_host_ptr
->sg_tablesize
);
992 command
= ContainerRawIo2
;
993 fibsize
= sizeof(struct aac_raw_io2
) +
994 ((le32_to_cpu(readcmd2
->sgeCnt
)-1) * sizeof(struct sge_ieee1212
));
996 struct aac_raw_io
*readcmd
;
997 readcmd
= (struct aac_raw_io
*) fib_data(fib
);
998 readcmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
999 readcmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1000 readcmd
->count
= cpu_to_le32(count
<<9);
1001 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1002 readcmd
->flags
= cpu_to_le16(RIO_TYPE_READ
);
1003 readcmd
->bpTotal
= 0;
1004 readcmd
->bpComplete
= 0;
1005 ret
= aac_build_sgraw(cmd
, &readcmd
->sg
);
1008 command
= ContainerRawIo
;
1009 fibsize
= sizeof(struct aac_raw_io
) +
1010 ((le32_to_cpu(readcmd
->sg
.count
)-1) * sizeof(struct sgentryraw
));
1013 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1015 * Now send the Fib to the adapter
1017 return aac_fib_send(command
,
1022 (fib_callback
) io_callback
,
1026 static int aac_read_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1029 struct aac_read64
*readcmd
;
1033 readcmd
= (struct aac_read64
*) fib_data(fib
);
1034 readcmd
->command
= cpu_to_le32(VM_CtHostRead64
);
1035 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1036 readcmd
->sector_count
= cpu_to_le16(count
);
1037 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1041 ret
= aac_build_sg64(cmd
, &readcmd
->sg
);
1044 fibsize
= sizeof(struct aac_read64
) +
1045 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1046 sizeof (struct sgentry64
));
1047 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1048 sizeof(struct aac_fibhdr
)));
1050 * Now send the Fib to the adapter
1052 return aac_fib_send(ContainerCommand64
,
1057 (fib_callback
) io_callback
,
1061 static int aac_read_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1064 struct aac_read
*readcmd
;
1068 readcmd
= (struct aac_read
*) fib_data(fib
);
1069 readcmd
->command
= cpu_to_le32(VM_CtBlockRead
);
1070 readcmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1071 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1072 readcmd
->count
= cpu_to_le32(count
* 512);
1074 ret
= aac_build_sg(cmd
, &readcmd
->sg
);
1077 fibsize
= sizeof(struct aac_read
) +
1078 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1079 sizeof (struct sgentry
));
1080 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1081 sizeof(struct aac_fibhdr
)));
1083 * Now send the Fib to the adapter
1085 return aac_fib_send(ContainerCommand
,
1090 (fib_callback
) io_callback
,
1094 static int aac_write_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1096 struct aac_dev
*dev
= fib
->dev
;
1097 u16 fibsize
, command
;
1101 if (dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
&& !dev
->sync_mode
) {
1102 struct aac_raw_io2
*writecmd2
;
1103 writecmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1104 memset(writecmd2
, 0, sizeof(struct aac_raw_io2
));
1105 writecmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1106 writecmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1107 writecmd2
->byteCount
= cpu_to_le32(count
<<9);
1108 writecmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1109 writecmd2
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1110 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1111 cpu_to_le16(RIO2_IO_TYPE_WRITE
|RIO2_IO_SUREWRITE
) :
1112 cpu_to_le16(RIO2_IO_TYPE_WRITE
);
1113 ret
= aac_build_sgraw2(cmd
, writecmd2
,
1114 dev
->scsi_host_ptr
->sg_tablesize
);
1117 command
= ContainerRawIo2
;
1118 fibsize
= sizeof(struct aac_raw_io2
) +
1119 ((le32_to_cpu(writecmd2
->sgeCnt
)-1) * sizeof(struct sge_ieee1212
));
1121 struct aac_raw_io
*writecmd
;
1122 writecmd
= (struct aac_raw_io
*) fib_data(fib
);
1123 writecmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1124 writecmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1125 writecmd
->count
= cpu_to_le32(count
<<9);
1126 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1127 writecmd
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1128 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1129 cpu_to_le16(RIO_TYPE_WRITE
|RIO_SUREWRITE
) :
1130 cpu_to_le16(RIO_TYPE_WRITE
);
1131 writecmd
->bpTotal
= 0;
1132 writecmd
->bpComplete
= 0;
1133 ret
= aac_build_sgraw(cmd
, &writecmd
->sg
);
1136 command
= ContainerRawIo
;
1137 fibsize
= sizeof(struct aac_raw_io
) +
1138 ((le32_to_cpu(writecmd
->sg
.count
)-1) * sizeof (struct sgentryraw
));
1141 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1143 * Now send the Fib to the adapter
1145 return aac_fib_send(command
,
1150 (fib_callback
) io_callback
,
1154 static int aac_write_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1157 struct aac_write64
*writecmd
;
1161 writecmd
= (struct aac_write64
*) fib_data(fib
);
1162 writecmd
->command
= cpu_to_le32(VM_CtHostWrite64
);
1163 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1164 writecmd
->sector_count
= cpu_to_le16(count
);
1165 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1167 writecmd
->flags
= 0;
1169 ret
= aac_build_sg64(cmd
, &writecmd
->sg
);
1172 fibsize
= sizeof(struct aac_write64
) +
1173 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1174 sizeof (struct sgentry64
));
1175 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1176 sizeof(struct aac_fibhdr
)));
1178 * Now send the Fib to the adapter
1180 return aac_fib_send(ContainerCommand64
,
1185 (fib_callback
) io_callback
,
1189 static int aac_write_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1192 struct aac_write
*writecmd
;
1196 writecmd
= (struct aac_write
*) fib_data(fib
);
1197 writecmd
->command
= cpu_to_le32(VM_CtBlockWrite
);
1198 writecmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1199 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1200 writecmd
->count
= cpu_to_le32(count
* 512);
1201 writecmd
->sg
.count
= cpu_to_le32(1);
1202 /* ->stable is not used - it did mean which type of write */
1204 ret
= aac_build_sg(cmd
, &writecmd
->sg
);
1207 fibsize
= sizeof(struct aac_write
) +
1208 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1209 sizeof (struct sgentry
));
1210 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1211 sizeof(struct aac_fibhdr
)));
1213 * Now send the Fib to the adapter
1215 return aac_fib_send(ContainerCommand
,
1220 (fib_callback
) io_callback
,
1224 static struct aac_srb
* aac_scsi_common(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1226 struct aac_srb
* srbcmd
;
1231 switch(cmd
->sc_data_direction
){
1235 case DMA_BIDIRECTIONAL
:
1236 flag
= SRB_DataIn
| SRB_DataOut
;
1238 case DMA_FROM_DEVICE
:
1242 default: /* shuts up some versions of gcc */
1243 flag
= SRB_NoDataXfer
;
1247 srbcmd
= (struct aac_srb
*) fib_data(fib
);
1248 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1249 srbcmd
->channel
= cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd
)));
1250 srbcmd
->id
= cpu_to_le32(scmd_id(cmd
));
1251 srbcmd
->lun
= cpu_to_le32(cmd
->device
->lun
);
1252 srbcmd
->flags
= cpu_to_le32(flag
);
1253 timeout
= cmd
->request
->timeout
/HZ
;
1256 srbcmd
->timeout
= cpu_to_le32(timeout
); // timeout in seconds
1257 srbcmd
->retry_limit
= 0; /* Obsolete parameter */
1258 srbcmd
->cdb_size
= cpu_to_le32(cmd
->cmd_len
);
1262 static void aac_srb_callback(void *context
, struct fib
* fibptr
);
1264 static int aac_scsi_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1267 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1270 ret
= aac_build_sg64(cmd
, (struct sgmap64
*) &srbcmd
->sg
);
1273 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1275 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1276 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1278 * Build Scatter/Gather list
1280 fibsize
= sizeof (struct aac_srb
) - sizeof (struct sgentry
) +
1281 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1282 sizeof (struct sgentry64
));
1283 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1284 sizeof(struct aac_fibhdr
)));
1287 * Now send the Fib to the adapter
1289 return aac_fib_send(ScsiPortCommand64
, fib
,
1290 fibsize
, FsaNormal
, 0, 1,
1291 (fib_callback
) aac_srb_callback
,
1295 static int aac_scsi_32(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1298 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1301 ret
= aac_build_sg(cmd
, (struct sgmap
*)&srbcmd
->sg
);
1304 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1306 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1307 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1309 * Build Scatter/Gather list
1311 fibsize
= sizeof (struct aac_srb
) +
1312 (((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) - 1) *
1313 sizeof (struct sgentry
));
1314 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1315 sizeof(struct aac_fibhdr
)));
1318 * Now send the Fib to the adapter
1320 return aac_fib_send(ScsiPortCommand
, fib
, fibsize
, FsaNormal
, 0, 1,
1321 (fib_callback
) aac_srb_callback
, (void *) cmd
);
1324 static int aac_scsi_32_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1326 if ((sizeof(dma_addr_t
) > 4) && fib
->dev
->needs_dac
&&
1327 (fib
->dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
))
1329 return aac_scsi_32(fib
, cmd
);
1332 int aac_get_adapter_info(struct aac_dev
* dev
)
1337 struct aac_adapter_info
*info
;
1338 struct aac_bus_info
*command
;
1339 struct aac_bus_info_response
*bus_info
;
1341 if (!(fibptr
= aac_fib_alloc(dev
)))
1344 aac_fib_init(fibptr
);
1345 info
= (struct aac_adapter_info
*) fib_data(fibptr
);
1346 memset(info
,0,sizeof(*info
));
1348 rcode
= aac_fib_send(RequestAdapterInfo
,
1352 -1, 1, /* First `interrupt' command uses special wait */
1357 /* FIB should be freed only after
1358 * getting the response from the F/W */
1359 if (rcode
!= -ERESTARTSYS
) {
1360 aac_fib_complete(fibptr
);
1361 aac_fib_free(fibptr
);
1365 memcpy(&dev
->adapter_info
, info
, sizeof(*info
));
1367 if (dev
->adapter_info
.options
& AAC_OPT_SUPPLEMENT_ADAPTER_INFO
) {
1368 struct aac_supplement_adapter_info
* sinfo
;
1370 aac_fib_init(fibptr
);
1372 sinfo
= (struct aac_supplement_adapter_info
*) fib_data(fibptr
);
1374 memset(sinfo
,0,sizeof(*sinfo
));
1376 rcode
= aac_fib_send(RequestSupplementAdapterInfo
,
1385 memcpy(&dev
->supplement_adapter_info
, sinfo
, sizeof(*sinfo
));
1386 if (rcode
== -ERESTARTSYS
) {
1387 fibptr
= aac_fib_alloc(dev
);
1399 aac_fib_init(fibptr
);
1401 bus_info
= (struct aac_bus_info_response
*) fib_data(fibptr
);
1403 memset(bus_info
, 0, sizeof(*bus_info
));
1405 command
= (struct aac_bus_info
*)bus_info
;
1407 command
->Command
= cpu_to_le32(VM_Ioctl
);
1408 command
->ObjType
= cpu_to_le32(FT_DRIVE
);
1409 command
->MethodId
= cpu_to_le32(1);
1410 command
->CtlCmd
= cpu_to_le32(GetBusInfo
);
1412 rcode
= aac_fib_send(ContainerCommand
,
1419 /* reasoned default */
1420 dev
->maximum_num_physicals
= 16;
1421 if (rcode
>= 0 && le32_to_cpu(bus_info
->Status
) == ST_OK
) {
1422 dev
->maximum_num_physicals
= le32_to_cpu(bus_info
->TargetsPerBus
);
1423 dev
->maximum_num_channels
= le32_to_cpu(bus_info
->BusCount
);
1426 if (!dev
->in_reset
) {
1428 tmp
= le32_to_cpu(dev
->adapter_info
.kernelrev
);
1429 printk(KERN_INFO
"%s%d: kernel %d.%d-%d[%d] %.*s\n",
1435 le32_to_cpu(dev
->adapter_info
.kernelbuild
),
1436 (int)sizeof(dev
->supplement_adapter_info
.BuildDate
),
1437 dev
->supplement_adapter_info
.BuildDate
);
1438 tmp
= le32_to_cpu(dev
->adapter_info
.monitorrev
);
1439 printk(KERN_INFO
"%s%d: monitor %d.%d-%d[%d]\n",
1441 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1442 le32_to_cpu(dev
->adapter_info
.monitorbuild
));
1443 tmp
= le32_to_cpu(dev
->adapter_info
.biosrev
);
1444 printk(KERN_INFO
"%s%d: bios %d.%d-%d[%d]\n",
1446 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1447 le32_to_cpu(dev
->adapter_info
.biosbuild
));
1449 if (aac_get_serial_number(
1450 shost_to_class(dev
->scsi_host_ptr
), buffer
))
1451 printk(KERN_INFO
"%s%d: serial %s",
1452 dev
->name
, dev
->id
, buffer
);
1453 if (dev
->supplement_adapter_info
.VpdInfo
.Tsid
[0]) {
1454 printk(KERN_INFO
"%s%d: TSID %.*s\n",
1456 (int)sizeof(dev
->supplement_adapter_info
.VpdInfo
.Tsid
),
1457 dev
->supplement_adapter_info
.VpdInfo
.Tsid
);
1459 if (!aac_check_reset
|| ((aac_check_reset
== 1) &&
1460 (dev
->supplement_adapter_info
.SupportedOptions2
&
1461 AAC_OPTION_IGNORE_RESET
))) {
1462 printk(KERN_INFO
"%s%d: Reset Adapter Ignored\n",
1463 dev
->name
, dev
->id
);
1467 dev
->cache_protected
= 0;
1468 dev
->jbod
= ((dev
->supplement_adapter_info
.FeatureBits
&
1469 AAC_FEATURE_JBOD
) != 0);
1470 dev
->nondasd_support
= 0;
1471 dev
->raid_scsi_mode
= 0;
1472 if(dev
->adapter_info
.options
& AAC_OPT_NONDASD
)
1473 dev
->nondasd_support
= 1;
1476 * If the firmware supports ROMB RAID/SCSI mode and we are currently
1477 * in RAID/SCSI mode, set the flag. For now if in this mode we will
1478 * force nondasd support on. If we decide to allow the non-dasd flag
1479 * additional changes changes will have to be made to support
1480 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
1481 * changed to support the new dev->raid_scsi_mode flag instead of
1482 * leaching off of the dev->nondasd_support flag. Also in linit.c the
1483 * function aac_detect will have to be modified where it sets up the
1484 * max number of channels based on the aac->nondasd_support flag only.
1486 if ((dev
->adapter_info
.options
& AAC_OPT_SCSI_MANAGED
) &&
1487 (dev
->adapter_info
.options
& AAC_OPT_RAID_SCSI_MODE
)) {
1488 dev
->nondasd_support
= 1;
1489 dev
->raid_scsi_mode
= 1;
1491 if (dev
->raid_scsi_mode
!= 0)
1492 printk(KERN_INFO
"%s%d: ROMB RAID/SCSI mode enabled\n",
1493 dev
->name
, dev
->id
);
1496 dev
->nondasd_support
= (nondasd
!=0);
1497 if (dev
->nondasd_support
&& !dev
->in_reset
)
1498 printk(KERN_INFO
"%s%d: Non-DASD support enabled.\n",dev
->name
, dev
->id
);
1500 if (dma_get_required_mask(&dev
->pdev
->dev
) > DMA_BIT_MASK(32))
1502 dev
->dac_support
= 0;
1503 if ((sizeof(dma_addr_t
) > 4) && dev
->needs_dac
&&
1504 (dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
)) {
1506 printk(KERN_INFO
"%s%d: 64bit support enabled.\n",
1507 dev
->name
, dev
->id
);
1508 dev
->dac_support
= 1;
1512 dev
->dac_support
= (dacmode
!=0);
1515 /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
1516 if (dev
->dac_support
&& (aac_get_driver_ident(dev
->cardtype
)->quirks
1517 & AAC_QUIRK_SCSI_32
)) {
1518 dev
->nondasd_support
= 0;
1520 expose_physicals
= 0;
1523 if(dev
->dac_support
!= 0) {
1524 if (!pci_set_dma_mask(dev
->pdev
, DMA_BIT_MASK(64)) &&
1525 !pci_set_consistent_dma_mask(dev
->pdev
, DMA_BIT_MASK(64))) {
1527 printk(KERN_INFO
"%s%d: 64 Bit DAC enabled\n",
1528 dev
->name
, dev
->id
);
1529 } else if (!pci_set_dma_mask(dev
->pdev
, DMA_BIT_MASK(32)) &&
1530 !pci_set_consistent_dma_mask(dev
->pdev
, DMA_BIT_MASK(32))) {
1531 printk(KERN_INFO
"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
1532 dev
->name
, dev
->id
);
1533 dev
->dac_support
= 0;
1535 printk(KERN_WARNING
"%s%d: No suitable DMA available.\n",
1536 dev
->name
, dev
->id
);
1541 * Deal with configuring for the individualized limits of each packet
1544 dev
->a_ops
.adapter_scsi
= (dev
->dac_support
)
1545 ? ((aac_get_driver_ident(dev
->cardtype
)->quirks
& AAC_QUIRK_SCSI_32
)
1549 if (dev
->raw_io_interface
) {
1550 dev
->a_ops
.adapter_bounds
= (dev
->raw_io_64
)
1553 dev
->a_ops
.adapter_read
= aac_read_raw_io
;
1554 dev
->a_ops
.adapter_write
= aac_write_raw_io
;
1556 dev
->a_ops
.adapter_bounds
= aac_bounds_32
;
1557 dev
->scsi_host_ptr
->sg_tablesize
= (dev
->max_fib_size
-
1558 sizeof(struct aac_fibhdr
) -
1559 sizeof(struct aac_write
) + sizeof(struct sgentry
)) /
1560 sizeof(struct sgentry
);
1561 if (dev
->dac_support
) {
1562 dev
->a_ops
.adapter_read
= aac_read_block64
;
1563 dev
->a_ops
.adapter_write
= aac_write_block64
;
1565 * 38 scatter gather elements
1567 dev
->scsi_host_ptr
->sg_tablesize
=
1568 (dev
->max_fib_size
-
1569 sizeof(struct aac_fibhdr
) -
1570 sizeof(struct aac_write64
) +
1571 sizeof(struct sgentry64
)) /
1572 sizeof(struct sgentry64
);
1574 dev
->a_ops
.adapter_read
= aac_read_block
;
1575 dev
->a_ops
.adapter_write
= aac_write_block
;
1577 dev
->scsi_host_ptr
->max_sectors
= AAC_MAX_32BIT_SGBCOUNT
;
1578 if (!(dev
->adapter_info
.options
& AAC_OPT_NEW_COMM
)) {
1580 * Worst case size that could cause sg overflow when
1581 * we break up SG elements that are larger than 64KB.
1582 * Would be nice if we could tell the SCSI layer what
1583 * the maximum SG element size can be. Worst case is
1584 * (sg_tablesize-1) 4KB elements with one 64KB
1586 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
1588 dev
->scsi_host_ptr
->max_sectors
=
1589 (dev
->scsi_host_ptr
->sg_tablesize
* 8) + 112;
1592 /* FIB should be freed only after getting the response from the F/W */
1593 if (rcode
!= -ERESTARTSYS
) {
1594 aac_fib_complete(fibptr
);
1595 aac_fib_free(fibptr
);
1602 static void io_callback(void *context
, struct fib
* fibptr
)
1604 struct aac_dev
*dev
;
1605 struct aac_read_reply
*readreply
;
1606 struct scsi_cmnd
*scsicmd
;
1609 scsicmd
= (struct scsi_cmnd
*) context
;
1611 if (!aac_valid_context(scsicmd
, fibptr
))
1615 cid
= scmd_id(scsicmd
);
1617 if (nblank(dprintk(x
))) {
1619 switch (scsicmd
->cmnd
[0]) {
1622 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
1623 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1627 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1628 ((u64
)scsicmd
->cmnd
[3] << 48) |
1629 ((u64
)scsicmd
->cmnd
[4] << 40) |
1630 ((u64
)scsicmd
->cmnd
[5] << 32) |
1631 ((u64
)scsicmd
->cmnd
[6] << 24) |
1632 (scsicmd
->cmnd
[7] << 16) |
1633 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1637 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1638 (scsicmd
->cmnd
[3] << 16) |
1639 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1642 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1643 (scsicmd
->cmnd
[3] << 16) |
1644 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1648 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
1649 smp_processor_id(), (unsigned long long)lba
, jiffies
);
1652 BUG_ON(fibptr
== NULL
);
1654 scsi_dma_unmap(scsicmd
);
1656 readreply
= (struct aac_read_reply
*)fib_data(fibptr
);
1657 switch (le32_to_cpu(readreply
->status
)) {
1659 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1661 dev
->fsa_dev
[cid
].sense_data
.sense_key
= NO_SENSE
;
1664 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1665 SAM_STAT_CHECK_CONDITION
;
1666 set_sense(&dev
->fsa_dev
[cid
].sense_data
, NOT_READY
,
1667 SENCODE_BECOMING_READY
, ASENCODE_BECOMING_READY
, 0, 0);
1668 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1669 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1670 SCSI_SENSE_BUFFERSIZE
));
1673 #ifdef AAC_DETAILED_STATUS_INFO
1674 printk(KERN_WARNING
"io_callback: io failed, status = %d\n",
1675 le32_to_cpu(readreply
->status
));
1677 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1678 SAM_STAT_CHECK_CONDITION
;
1679 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1680 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1681 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1682 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1683 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1684 SCSI_SENSE_BUFFERSIZE
));
1687 aac_fib_complete(fibptr
);
1688 aac_fib_free(fibptr
);
1690 scsicmd
->scsi_done(scsicmd
);
1693 static int aac_read(struct scsi_cmnd
* scsicmd
)
1698 struct aac_dev
*dev
;
1699 struct fib
* cmd_fibcontext
;
1702 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1704 * Get block address and transfer length
1706 switch (scsicmd
->cmnd
[0]) {
1708 dprintk((KERN_DEBUG
"aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd
)));
1710 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
1711 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1712 count
= scsicmd
->cmnd
[4];
1718 dprintk((KERN_DEBUG
"aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd
)));
1720 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1721 ((u64
)scsicmd
->cmnd
[3] << 48) |
1722 ((u64
)scsicmd
->cmnd
[4] << 40) |
1723 ((u64
)scsicmd
->cmnd
[5] << 32) |
1724 ((u64
)scsicmd
->cmnd
[6] << 24) |
1725 (scsicmd
->cmnd
[7] << 16) |
1726 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1727 count
= (scsicmd
->cmnd
[10] << 24) |
1728 (scsicmd
->cmnd
[11] << 16) |
1729 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
1732 dprintk((KERN_DEBUG
"aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd
)));
1734 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1735 (scsicmd
->cmnd
[3] << 16) |
1736 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1737 count
= (scsicmd
->cmnd
[6] << 24) |
1738 (scsicmd
->cmnd
[7] << 16) |
1739 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1742 dprintk((KERN_DEBUG
"aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd
)));
1744 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1745 (scsicmd
->cmnd
[3] << 16) |
1746 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1747 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1751 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
1752 cid
= scmd_id(scsicmd
);
1753 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
1754 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1755 SAM_STAT_CHECK_CONDITION
;
1756 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1757 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1758 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1759 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1760 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1761 SCSI_SENSE_BUFFERSIZE
));
1762 scsicmd
->scsi_done(scsicmd
);
1766 dprintk((KERN_DEBUG
"aac_read[cpu %d]: lba = %llu, t = %ld.\n",
1767 smp_processor_id(), (unsigned long long)lba
, jiffies
));
1768 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
1771 * Alocate and initialize a Fib
1773 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
1774 printk(KERN_WARNING
"aac_read: fib allocation failed\n");
1778 status
= aac_adapter_read(cmd_fibcontext
, scsicmd
, lba
, count
);
1781 * Check that the command queued to the controller
1783 if (status
== -EINPROGRESS
) {
1784 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1788 printk(KERN_WARNING
"aac_read: aac_fib_send failed with status: %d.\n", status
);
1790 * For some reason, the Fib didn't queue, return QUEUE_FULL
1792 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
1793 scsicmd
->scsi_done(scsicmd
);
1794 aac_fib_complete(cmd_fibcontext
);
1795 aac_fib_free(cmd_fibcontext
);
1799 static int aac_write(struct scsi_cmnd
* scsicmd
)
1805 struct aac_dev
*dev
;
1806 struct fib
* cmd_fibcontext
;
1809 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1811 * Get block address and transfer length
1813 if (scsicmd
->cmnd
[0] == WRITE_6
) /* 6 byte command */
1815 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) | (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1816 count
= scsicmd
->cmnd
[4];
1820 } else if (scsicmd
->cmnd
[0] == WRITE_16
) { /* 16 byte command */
1821 dprintk((KERN_DEBUG
"aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd
)));
1823 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1824 ((u64
)scsicmd
->cmnd
[3] << 48) |
1825 ((u64
)scsicmd
->cmnd
[4] << 40) |
1826 ((u64
)scsicmd
->cmnd
[5] << 32) |
1827 ((u64
)scsicmd
->cmnd
[6] << 24) |
1828 (scsicmd
->cmnd
[7] << 16) |
1829 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1830 count
= (scsicmd
->cmnd
[10] << 24) | (scsicmd
->cmnd
[11] << 16) |
1831 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
1832 fua
= scsicmd
->cmnd
[1] & 0x8;
1833 } else if (scsicmd
->cmnd
[0] == WRITE_12
) { /* 12 byte command */
1834 dprintk((KERN_DEBUG
"aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd
)));
1836 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16)
1837 | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1838 count
= (scsicmd
->cmnd
[6] << 24) | (scsicmd
->cmnd
[7] << 16)
1839 | (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1840 fua
= scsicmd
->cmnd
[1] & 0x8;
1842 dprintk((KERN_DEBUG
"aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd
)));
1843 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1844 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1845 fua
= scsicmd
->cmnd
[1] & 0x8;
1848 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
1849 cid
= scmd_id(scsicmd
);
1850 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
1851 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1852 SAM_STAT_CHECK_CONDITION
;
1853 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1854 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1855 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1856 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1857 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1858 SCSI_SENSE_BUFFERSIZE
));
1859 scsicmd
->scsi_done(scsicmd
);
1863 dprintk((KERN_DEBUG
"aac_write[cpu %d]: lba = %llu, t = %ld.\n",
1864 smp_processor_id(), (unsigned long long)lba
, jiffies
));
1865 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
1868 * Allocate and initialize a Fib then setup a BlockWrite command
1870 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
1871 /* FIB temporarily unavailable,not catastrophic failure */
1873 /* scsicmd->result = DID_ERROR << 16;
1874 * scsicmd->scsi_done(scsicmd);
1877 printk(KERN_WARNING
"aac_write: fib allocation failed\n");
1881 status
= aac_adapter_write(cmd_fibcontext
, scsicmd
, lba
, count
, fua
);
1884 * Check that the command queued to the controller
1886 if (status
== -EINPROGRESS
) {
1887 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1891 printk(KERN_WARNING
"aac_write: aac_fib_send failed with status: %d\n", status
);
1893 * For some reason, the Fib didn't queue, return QUEUE_FULL
1895 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
1896 scsicmd
->scsi_done(scsicmd
);
1898 aac_fib_complete(cmd_fibcontext
);
1899 aac_fib_free(cmd_fibcontext
);
1903 static void synchronize_callback(void *context
, struct fib
*fibptr
)
1905 struct aac_synchronize_reply
*synchronizereply
;
1906 struct scsi_cmnd
*cmd
;
1910 if (!aac_valid_context(cmd
, fibptr
))
1913 dprintk((KERN_DEBUG
"synchronize_callback[cpu %d]: t = %ld.\n",
1914 smp_processor_id(), jiffies
));
1915 BUG_ON(fibptr
== NULL
);
1918 synchronizereply
= fib_data(fibptr
);
1919 if (le32_to_cpu(synchronizereply
->status
) == CT_OK
)
1920 cmd
->result
= DID_OK
<< 16 |
1921 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1923 struct scsi_device
*sdev
= cmd
->device
;
1924 struct aac_dev
*dev
= fibptr
->dev
;
1925 u32 cid
= sdev_id(sdev
);
1927 "synchronize_callback: synchronize failed, status = %d\n",
1928 le32_to_cpu(synchronizereply
->status
));
1929 cmd
->result
= DID_OK
<< 16 |
1930 COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1931 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1932 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1933 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1934 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1935 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1936 SCSI_SENSE_BUFFERSIZE
));
1939 aac_fib_complete(fibptr
);
1940 aac_fib_free(fibptr
);
1941 cmd
->scsi_done(cmd
);
1944 static int aac_synchronize(struct scsi_cmnd
*scsicmd
)
1947 struct fib
*cmd_fibcontext
;
1948 struct aac_synchronize
*synchronizecmd
;
1949 struct scsi_cmnd
*cmd
;
1950 struct scsi_device
*sdev
= scsicmd
->device
;
1952 struct aac_dev
*aac
;
1953 u64 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) |
1954 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1955 u32 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1956 unsigned long flags
;
1959 * Wait for all outstanding queued commands to complete to this
1960 * specific target (block).
1962 spin_lock_irqsave(&sdev
->list_lock
, flags
);
1963 list_for_each_entry(cmd
, &sdev
->cmd_list
, list
)
1964 if (cmd
->SCp
.phase
== AAC_OWNER_FIRMWARE
) {
1968 if (cmd
->cmnd
[0] == WRITE_6
) {
1969 cmnd_lba
= ((cmd
->cmnd
[1] & 0x1F) << 16) |
1970 (cmd
->cmnd
[2] << 8) |
1972 cmnd_count
= cmd
->cmnd
[4];
1973 if (cmnd_count
== 0)
1975 } else if (cmd
->cmnd
[0] == WRITE_16
) {
1976 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 56) |
1977 ((u64
)cmd
->cmnd
[3] << 48) |
1978 ((u64
)cmd
->cmnd
[4] << 40) |
1979 ((u64
)cmd
->cmnd
[5] << 32) |
1980 ((u64
)cmd
->cmnd
[6] << 24) |
1981 (cmd
->cmnd
[7] << 16) |
1982 (cmd
->cmnd
[8] << 8) |
1984 cmnd_count
= (cmd
->cmnd
[10] << 24) |
1985 (cmd
->cmnd
[11] << 16) |
1986 (cmd
->cmnd
[12] << 8) |
1988 } else if (cmd
->cmnd
[0] == WRITE_12
) {
1989 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
1990 (cmd
->cmnd
[3] << 16) |
1991 (cmd
->cmnd
[4] << 8) |
1993 cmnd_count
= (cmd
->cmnd
[6] << 24) |
1994 (cmd
->cmnd
[7] << 16) |
1995 (cmd
->cmnd
[8] << 8) |
1997 } else if (cmd
->cmnd
[0] == WRITE_10
) {
1998 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
1999 (cmd
->cmnd
[3] << 16) |
2000 (cmd
->cmnd
[4] << 8) |
2002 cmnd_count
= (cmd
->cmnd
[7] << 8) |
2006 if (((cmnd_lba
+ cmnd_count
) < lba
) ||
2007 (count
&& ((lba
+ count
) < cmnd_lba
)))
2013 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
2016 * Yield the processor (requeue for later)
2019 return SCSI_MLQUEUE_DEVICE_BUSY
;
2021 aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2023 return SCSI_MLQUEUE_HOST_BUSY
;
2026 * Allocate and initialize a Fib
2028 if (!(cmd_fibcontext
= aac_fib_alloc(aac
)))
2029 return SCSI_MLQUEUE_HOST_BUSY
;
2031 aac_fib_init(cmd_fibcontext
);
2033 synchronizecmd
= fib_data(cmd_fibcontext
);
2034 synchronizecmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2035 synchronizecmd
->type
= cpu_to_le32(CT_FLUSH_CACHE
);
2036 synchronizecmd
->cid
= cpu_to_le32(scmd_id(scsicmd
));
2037 synchronizecmd
->count
=
2038 cpu_to_le32(sizeof(((struct aac_synchronize_reply
*)NULL
)->data
));
2041 * Now send the Fib to the adapter
2043 status
= aac_fib_send(ContainerCommand
,
2045 sizeof(struct aac_synchronize
),
2048 (fib_callback
)synchronize_callback
,
2052 * Check that the command queued to the controller
2054 if (status
== -EINPROGRESS
) {
2055 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2060 "aac_synchronize: aac_fib_send failed with status: %d.\n", status
);
2061 aac_fib_complete(cmd_fibcontext
);
2062 aac_fib_free(cmd_fibcontext
);
2063 return SCSI_MLQUEUE_HOST_BUSY
;
2066 static void aac_start_stop_callback(void *context
, struct fib
*fibptr
)
2068 struct scsi_cmnd
*scsicmd
= context
;
2070 if (!aac_valid_context(scsicmd
, fibptr
))
2073 BUG_ON(fibptr
== NULL
);
2075 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2077 aac_fib_complete(fibptr
);
2078 aac_fib_free(fibptr
);
2079 scsicmd
->scsi_done(scsicmd
);
2082 static int aac_start_stop(struct scsi_cmnd
*scsicmd
)
2085 struct fib
*cmd_fibcontext
;
2086 struct aac_power_management
*pmcmd
;
2087 struct scsi_device
*sdev
= scsicmd
->device
;
2088 struct aac_dev
*aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2090 if (!(aac
->supplement_adapter_info
.SupportedOptions2
&
2091 AAC_OPTION_POWER_MANAGEMENT
)) {
2092 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2094 scsicmd
->scsi_done(scsicmd
);
2099 return SCSI_MLQUEUE_HOST_BUSY
;
2102 * Allocate and initialize a Fib
2104 cmd_fibcontext
= aac_fib_alloc(aac
);
2105 if (!cmd_fibcontext
)
2106 return SCSI_MLQUEUE_HOST_BUSY
;
2108 aac_fib_init(cmd_fibcontext
);
2110 pmcmd
= fib_data(cmd_fibcontext
);
2111 pmcmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2112 pmcmd
->type
= cpu_to_le32(CT_POWER_MANAGEMENT
);
2113 /* Eject bit ignored, not relevant */
2114 pmcmd
->sub
= (scsicmd
->cmnd
[4] & 1) ?
2115 cpu_to_le32(CT_PM_START_UNIT
) : cpu_to_le32(CT_PM_STOP_UNIT
);
2116 pmcmd
->cid
= cpu_to_le32(sdev_id(sdev
));
2117 pmcmd
->parm
= (scsicmd
->cmnd
[1] & 1) ?
2118 cpu_to_le32(CT_PM_UNIT_IMMEDIATE
) : 0;
2121 * Now send the Fib to the adapter
2123 status
= aac_fib_send(ContainerCommand
,
2125 sizeof(struct aac_power_management
),
2128 (fib_callback
)aac_start_stop_callback
,
2132 * Check that the command queued to the controller
2134 if (status
== -EINPROGRESS
) {
2135 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2139 aac_fib_complete(cmd_fibcontext
);
2140 aac_fib_free(cmd_fibcontext
);
2141 return SCSI_MLQUEUE_HOST_BUSY
;
2145 * aac_scsi_cmd() - Process SCSI command
2146 * @scsicmd: SCSI command block
2148 * Emulate a SCSI command and queue the required request for the
2152 int aac_scsi_cmd(struct scsi_cmnd
* scsicmd
)
2155 struct Scsi_Host
*host
= scsicmd
->device
->host
;
2156 struct aac_dev
*dev
= (struct aac_dev
*)host
->hostdata
;
2157 struct fsa_dev_info
*fsa_dev_ptr
= dev
->fsa_dev
;
2159 if (fsa_dev_ptr
== NULL
)
2162 * If the bus, id or lun is out of range, return fail
2163 * Test does not apply to ID 16, the pseudo id for the controller
2166 cid
= scmd_id(scsicmd
);
2167 if (cid
!= host
->this_id
) {
2168 if (scmd_channel(scsicmd
) == CONTAINER_CHANNEL
) {
2169 if((cid
>= dev
->maximum_num_containers
) ||
2170 (scsicmd
->device
->lun
!= 0)) {
2171 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2172 scsicmd
->scsi_done(scsicmd
);
2177 * If the target container doesn't exist, it may have
2178 * been newly created
2180 if (((fsa_dev_ptr
[cid
].valid
& 1) == 0) ||
2181 (fsa_dev_ptr
[cid
].sense_data
.sense_key
==
2183 switch (scsicmd
->cmnd
[0]) {
2184 case SERVICE_ACTION_IN
:
2185 if (!(dev
->raw_io_interface
) ||
2186 !(dev
->raw_io_64
) ||
2187 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2191 case TEST_UNIT_READY
:
2194 return _aac_probe_container(scsicmd
,
2195 aac_probe_container_callback2
);
2200 } else { /* check for physical non-dasd devices */
2201 if (dev
->nondasd_support
|| expose_physicals
||
2205 return aac_send_srb_fib(scsicmd
);
2207 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2208 scsicmd
->scsi_done(scsicmd
);
2214 * else Command for the controller itself
2216 else if ((scsicmd
->cmnd
[0] != INQUIRY
) && /* only INQUIRY & TUR cmnd supported for controller */
2217 (scsicmd
->cmnd
[0] != TEST_UNIT_READY
))
2219 dprintk((KERN_WARNING
"Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd
->cmnd
[0]));
2220 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2221 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2222 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2223 ASENCODE_INVALID_COMMAND
, 0, 0);
2224 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2225 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2226 SCSI_SENSE_BUFFERSIZE
));
2227 scsicmd
->scsi_done(scsicmd
);
2232 /* Handle commands here that don't really require going out to the adapter */
2233 switch (scsicmd
->cmnd
[0]) {
2236 struct inquiry_data inq_data
;
2238 dprintk((KERN_DEBUG
"INQUIRY command, ID: %d.\n", cid
));
2239 memset(&inq_data
, 0, sizeof (struct inquiry_data
));
2241 if ((scsicmd
->cmnd
[1] & 0x1) && aac_wwn
) {
2242 char *arr
= (char *)&inq_data
;
2245 arr
[0] = (scmd_id(scsicmd
) == host
->this_id
) ?
2246 INQD_PDT_PROC
: INQD_PDT_DA
;
2247 if (scsicmd
->cmnd
[2] == 0) {
2248 /* supported vital product data pages */
2252 arr
[1] = scsicmd
->cmnd
[2];
2253 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2255 scsicmd
->result
= DID_OK
<< 16 |
2256 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2257 } else if (scsicmd
->cmnd
[2] == 0x80) {
2258 /* unit serial number page */
2259 arr
[3] = setinqserial(dev
, &arr
[4],
2261 arr
[1] = scsicmd
->cmnd
[2];
2262 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2265 return aac_get_container_serial(
2267 /* SLES 10 SP1 special */
2268 scsicmd
->result
= DID_OK
<< 16 |
2269 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2271 /* vpd page not implemented */
2272 scsicmd
->result
= DID_OK
<< 16 |
2273 COMMAND_COMPLETE
<< 8 |
2274 SAM_STAT_CHECK_CONDITION
;
2275 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2276 ILLEGAL_REQUEST
, SENCODE_INVALID_CDB_FIELD
,
2277 ASENCODE_NO_SENSE
, 7, 2);
2278 memcpy(scsicmd
->sense_buffer
,
2279 &dev
->fsa_dev
[cid
].sense_data
,
2281 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2282 SCSI_SENSE_BUFFERSIZE
));
2284 scsicmd
->scsi_done(scsicmd
);
2287 inq_data
.inqd_ver
= 2; /* claim compliance to SCSI-2 */
2288 inq_data
.inqd_rdf
= 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2289 inq_data
.inqd_len
= 31;
2290 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2291 inq_data
.inqd_pad2
= 0x32 ; /*WBus16|Sync|CmdQue */
2293 * Set the Vendor, Product, and Revision Level
2294 * see: <vendor>.c i.e. aac.c
2296 if (cid
== host
->this_id
) {
2297 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), ARRAY_SIZE(container_types
));
2298 inq_data
.inqd_pdt
= INQD_PDT_PROC
; /* Processor device */
2299 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2301 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2302 scsicmd
->scsi_done(scsicmd
);
2307 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), fsa_dev_ptr
[cid
].type
);
2308 inq_data
.inqd_pdt
= INQD_PDT_DA
; /* Direct/random access device */
2309 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
2310 return aac_get_container_name(scsicmd
);
2312 case SERVICE_ACTION_IN
:
2313 if (!(dev
->raw_io_interface
) ||
2314 !(dev
->raw_io_64
) ||
2315 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2320 unsigned int alloc_len
;
2322 dprintk((KERN_DEBUG
"READ CAPACITY_16 command.\n"));
2323 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2324 cp
[0] = (capacity
>> 56) & 0xff;
2325 cp
[1] = (capacity
>> 48) & 0xff;
2326 cp
[2] = (capacity
>> 40) & 0xff;
2327 cp
[3] = (capacity
>> 32) & 0xff;
2328 cp
[4] = (capacity
>> 24) & 0xff;
2329 cp
[5] = (capacity
>> 16) & 0xff;
2330 cp
[6] = (capacity
>> 8) & 0xff;
2331 cp
[7] = (capacity
>> 0) & 0xff;
2338 alloc_len
= ((scsicmd
->cmnd
[10] << 24)
2339 + (scsicmd
->cmnd
[11] << 16)
2340 + (scsicmd
->cmnd
[12] << 8) + scsicmd
->cmnd
[13]);
2342 alloc_len
= min_t(size_t, alloc_len
, sizeof(cp
));
2343 scsi_sg_copy_from_buffer(scsicmd
, cp
, alloc_len
);
2344 if (alloc_len
< scsi_bufflen(scsicmd
))
2345 scsi_set_resid(scsicmd
,
2346 scsi_bufflen(scsicmd
) - alloc_len
);
2348 /* Do not cache partition table for arrays */
2349 scsicmd
->device
->removable
= 1;
2351 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2352 scsicmd
->scsi_done(scsicmd
);
2362 dprintk((KERN_DEBUG
"READ CAPACITY command.\n"));
2363 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
2364 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2368 cp
[0] = (capacity
>> 24) & 0xff;
2369 cp
[1] = (capacity
>> 16) & 0xff;
2370 cp
[2] = (capacity
>> 8) & 0xff;
2371 cp
[3] = (capacity
>> 0) & 0xff;
2376 scsi_sg_copy_from_buffer(scsicmd
, cp
, sizeof(cp
));
2377 /* Do not cache partition table for arrays */
2378 scsicmd
->device
->removable
= 1;
2379 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2381 scsicmd
->scsi_done(scsicmd
);
2389 int mode_buf_length
= 4;
2391 dprintk((KERN_DEBUG
"MODE SENSE command.\n"));
2392 mode_buf
[0] = 3; /* Mode data length */
2393 mode_buf
[1] = 0; /* Medium type - default */
2394 mode_buf
[2] = 0; /* Device-specific param,
2395 bit 8: 0/1 = write enabled/protected
2396 bit 4: 0/1 = FUA enabled */
2397 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2399 mode_buf
[3] = 0; /* Block descriptor length */
2400 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
2401 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
2405 mode_buf
[6] = ((aac_cache
& 6) == 2)
2406 ? 0 : 0x04; /* WCE */
2407 mode_buf_length
= 7;
2408 if (mode_buf_length
> scsicmd
->cmnd
[4])
2409 mode_buf_length
= scsicmd
->cmnd
[4];
2411 scsi_sg_copy_from_buffer(scsicmd
, mode_buf
, mode_buf_length
);
2412 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2413 scsicmd
->scsi_done(scsicmd
);
2420 int mode_buf_length
= 8;
2422 dprintk((KERN_DEBUG
"MODE SENSE 10 byte command.\n"));
2423 mode_buf
[0] = 0; /* Mode data length (MSB) */
2424 mode_buf
[1] = 6; /* Mode data length (LSB) */
2425 mode_buf
[2] = 0; /* Medium type - default */
2426 mode_buf
[3] = 0; /* Device-specific param,
2427 bit 8: 0/1 = write enabled/protected
2428 bit 4: 0/1 = FUA enabled */
2429 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2431 mode_buf
[4] = 0; /* reserved */
2432 mode_buf
[5] = 0; /* reserved */
2433 mode_buf
[6] = 0; /* Block descriptor length (MSB) */
2434 mode_buf
[7] = 0; /* Block descriptor length (LSB) */
2435 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
2436 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
2440 mode_buf
[10] = ((aac_cache
& 6) == 2)
2441 ? 0 : 0x04; /* WCE */
2442 mode_buf_length
= 11;
2443 if (mode_buf_length
> scsicmd
->cmnd
[8])
2444 mode_buf_length
= scsicmd
->cmnd
[8];
2446 scsi_sg_copy_from_buffer(scsicmd
, mode_buf
, mode_buf_length
);
2448 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2449 scsicmd
->scsi_done(scsicmd
);
2454 dprintk((KERN_DEBUG
"REQUEST SENSE command.\n"));
2455 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
, sizeof (struct sense_data
));
2456 memset(&dev
->fsa_dev
[cid
].sense_data
, 0, sizeof (struct sense_data
));
2457 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2458 scsicmd
->scsi_done(scsicmd
);
2461 case ALLOW_MEDIUM_REMOVAL
:
2462 dprintk((KERN_DEBUG
"LOCK command.\n"));
2463 if (scsicmd
->cmnd
[4])
2464 fsa_dev_ptr
[cid
].locked
= 1;
2466 fsa_dev_ptr
[cid
].locked
= 0;
2468 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2469 scsicmd
->scsi_done(scsicmd
);
2472 * These commands are all No-Ops
2474 case TEST_UNIT_READY
:
2475 if (fsa_dev_ptr
[cid
].sense_data
.sense_key
== NOT_READY
) {
2476 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2477 SAM_STAT_CHECK_CONDITION
;
2478 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2479 NOT_READY
, SENCODE_BECOMING_READY
,
2480 ASENCODE_BECOMING_READY
, 0, 0);
2481 memcpy(scsicmd
->sense_buffer
,
2482 &dev
->fsa_dev
[cid
].sense_data
,
2484 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2485 SCSI_SENSE_BUFFERSIZE
));
2486 scsicmd
->scsi_done(scsicmd
);
2493 case REASSIGN_BLOCKS
:
2495 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2496 scsicmd
->scsi_done(scsicmd
);
2500 return aac_start_stop(scsicmd
);
2503 switch (scsicmd
->cmnd
[0])
2512 * Hack to keep track of ordinal number of the device that
2513 * corresponds to a container. Needed to convert
2514 * containers to /dev/sd device names
2517 if (scsicmd
->request
->rq_disk
)
2518 strlcpy(fsa_dev_ptr
[cid
].devname
,
2519 scsicmd
->request
->rq_disk
->disk_name
,
2520 min(sizeof(fsa_dev_ptr
[cid
].devname
),
2521 sizeof(scsicmd
->request
->rq_disk
->disk_name
) + 1));
2523 return aac_read(scsicmd
);
2531 return aac_write(scsicmd
);
2533 case SYNCHRONIZE_CACHE
:
2534 if (((aac_cache
& 6) == 6) && dev
->cache_protected
) {
2535 scsicmd
->result
= DID_OK
<< 16 |
2536 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2537 scsicmd
->scsi_done(scsicmd
);
2540 /* Issue FIB to tell Firmware to flush it's cache */
2541 if ((aac_cache
& 6) != 2)
2542 return aac_synchronize(scsicmd
);
2546 * Unhandled commands
2548 dprintk((KERN_WARNING
"Unhandled SCSI Command: 0x%x.\n", scsicmd
->cmnd
[0]));
2549 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2550 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2551 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2552 ASENCODE_INVALID_COMMAND
, 0, 0);
2553 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2555 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2556 SCSI_SENSE_BUFFERSIZE
));
2557 scsicmd
->scsi_done(scsicmd
);
2562 static int query_disk(struct aac_dev
*dev
, void __user
*arg
)
2564 struct aac_query_disk qd
;
2565 struct fsa_dev_info
*fsa_dev_ptr
;
2567 fsa_dev_ptr
= dev
->fsa_dev
;
2570 if (copy_from_user(&qd
, arg
, sizeof (struct aac_query_disk
)))
2574 else if ((qd
.bus
== -1) && (qd
.id
== -1) && (qd
.lun
== -1))
2576 if (qd
.cnum
< 0 || qd
.cnum
>= dev
->maximum_num_containers
)
2578 qd
.instance
= dev
->scsi_host_ptr
->host_no
;
2580 qd
.id
= CONTAINER_TO_ID(qd
.cnum
);
2581 qd
.lun
= CONTAINER_TO_LUN(qd
.cnum
);
2583 else return -EINVAL
;
2585 qd
.valid
= fsa_dev_ptr
[qd
.cnum
].valid
!= 0;
2586 qd
.locked
= fsa_dev_ptr
[qd
.cnum
].locked
;
2587 qd
.deleted
= fsa_dev_ptr
[qd
.cnum
].deleted
;
2589 if (fsa_dev_ptr
[qd
.cnum
].devname
[0] == '\0')
2594 strlcpy(qd
.name
, fsa_dev_ptr
[qd
.cnum
].devname
,
2595 min(sizeof(qd
.name
), sizeof(fsa_dev_ptr
[qd
.cnum
].devname
) + 1));
2597 if (copy_to_user(arg
, &qd
, sizeof (struct aac_query_disk
)))
2602 static int force_delete_disk(struct aac_dev
*dev
, void __user
*arg
)
2604 struct aac_delete_disk dd
;
2605 struct fsa_dev_info
*fsa_dev_ptr
;
2607 fsa_dev_ptr
= dev
->fsa_dev
;
2611 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
2614 if (dd
.cnum
>= dev
->maximum_num_containers
)
2617 * Mark this container as being deleted.
2619 fsa_dev_ptr
[dd
.cnum
].deleted
= 1;
2621 * Mark the container as no longer valid
2623 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
2627 static int delete_disk(struct aac_dev
*dev
, void __user
*arg
)
2629 struct aac_delete_disk dd
;
2630 struct fsa_dev_info
*fsa_dev_ptr
;
2632 fsa_dev_ptr
= dev
->fsa_dev
;
2636 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
2639 if (dd
.cnum
>= dev
->maximum_num_containers
)
2642 * If the container is locked, it can not be deleted by the API.
2644 if (fsa_dev_ptr
[dd
.cnum
].locked
)
2648 * Mark the container as no longer being valid.
2650 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
2651 fsa_dev_ptr
[dd
.cnum
].devname
[0] = '\0';
2656 int aac_dev_ioctl(struct aac_dev
*dev
, int cmd
, void __user
*arg
)
2659 case FSACTL_QUERY_DISK
:
2660 return query_disk(dev
, arg
);
2661 case FSACTL_DELETE_DISK
:
2662 return delete_disk(dev
, arg
);
2663 case FSACTL_FORCE_DELETE_DISK
:
2664 return force_delete_disk(dev
, arg
);
2665 case FSACTL_GET_CONTAINERS
:
2666 return aac_get_containers(dev
);
2675 * @context: the context set in the fib - here it is scsi cmd
2676 * @fibptr: pointer to the fib
2678 * Handles the completion of a scsi command to a non dasd device
2682 static void aac_srb_callback(void *context
, struct fib
* fibptr
)
2684 struct aac_dev
*dev
;
2685 struct aac_srb_reply
*srbreply
;
2686 struct scsi_cmnd
*scsicmd
;
2688 scsicmd
= (struct scsi_cmnd
*) context
;
2690 if (!aac_valid_context(scsicmd
, fibptr
))
2693 BUG_ON(fibptr
== NULL
);
2697 srbreply
= (struct aac_srb_reply
*) fib_data(fibptr
);
2699 scsicmd
->sense_buffer
[0] = '\0'; /* Initialize sense valid flag to false */
2701 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
2703 srbreply
->srb_status
= cpu_to_le32(SRB_STATUS_SUCCESS
);
2704 srbreply
->scsi_status
= cpu_to_le32(SAM_STAT_GOOD
);
2707 * Calculate resid for sg
2709 scsi_set_resid(scsicmd
, scsi_bufflen(scsicmd
)
2710 - le32_to_cpu(srbreply
->data_xfer_length
));
2713 scsi_dma_unmap(scsicmd
);
2715 /* expose physical device if expose_physicald flag is on */
2716 if (scsicmd
->cmnd
[0] == INQUIRY
&& !(scsicmd
->cmnd
[1] & 0x01)
2717 && expose_physicals
> 0)
2718 aac_expose_phy_device(scsicmd
);
2721 * First check the fib status
2724 if (le32_to_cpu(srbreply
->status
) != ST_OK
){
2726 printk(KERN_WARNING
"aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply
->status
));
2727 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
2728 SCSI_SENSE_BUFFERSIZE
);
2729 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2730 memcpy(scsicmd
->sense_buffer
, srbreply
->sense_data
, len
);
2734 * Next check the srb status
2736 switch( (le32_to_cpu(srbreply
->srb_status
))&0x3f){
2737 case SRB_STATUS_ERROR_RECOVERY
:
2738 case SRB_STATUS_PENDING
:
2739 case SRB_STATUS_SUCCESS
:
2740 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2742 case SRB_STATUS_DATA_OVERRUN
:
2743 switch(scsicmd
->cmnd
[0]){
2752 if (le32_to_cpu(srbreply
->data_xfer_length
) < scsicmd
->underflow
) {
2753 printk(KERN_WARNING
"aacraid: SCSI CMD underflow\n");
2755 printk(KERN_WARNING
"aacraid: SCSI CMD Data Overrun\n");
2757 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
2760 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2764 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2768 case SRB_STATUS_ABORTED
:
2769 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
2771 case SRB_STATUS_ABORT_FAILED
:
2772 // Not sure about this one - but assuming the hba was trying to abort for some reason
2773 scsicmd
->result
= DID_ERROR
<< 16 | ABORT
<< 8;
2775 case SRB_STATUS_PARITY_ERROR
:
2776 scsicmd
->result
= DID_PARITY
<< 16 | MSG_PARITY_ERROR
<< 8;
2778 case SRB_STATUS_NO_DEVICE
:
2779 case SRB_STATUS_INVALID_PATH_ID
:
2780 case SRB_STATUS_INVALID_TARGET_ID
:
2781 case SRB_STATUS_INVALID_LUN
:
2782 case SRB_STATUS_SELECTION_TIMEOUT
:
2783 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
2786 case SRB_STATUS_COMMAND_TIMEOUT
:
2787 case SRB_STATUS_TIMEOUT
:
2788 scsicmd
->result
= DID_TIME_OUT
<< 16 | COMMAND_COMPLETE
<< 8;
2791 case SRB_STATUS_BUSY
:
2792 scsicmd
->result
= DID_BUS_BUSY
<< 16 | COMMAND_COMPLETE
<< 8;
2795 case SRB_STATUS_BUS_RESET
:
2796 scsicmd
->result
= DID_RESET
<< 16 | COMMAND_COMPLETE
<< 8;
2799 case SRB_STATUS_MESSAGE_REJECTED
:
2800 scsicmd
->result
= DID_ERROR
<< 16 | MESSAGE_REJECT
<< 8;
2802 case SRB_STATUS_REQUEST_FLUSHED
:
2803 case SRB_STATUS_ERROR
:
2804 case SRB_STATUS_INVALID_REQUEST
:
2805 case SRB_STATUS_REQUEST_SENSE_FAILED
:
2806 case SRB_STATUS_NO_HBA
:
2807 case SRB_STATUS_UNEXPECTED_BUS_FREE
:
2808 case SRB_STATUS_PHASE_SEQUENCE_FAILURE
:
2809 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH
:
2810 case SRB_STATUS_DELAYED_RETRY
:
2811 case SRB_STATUS_BAD_FUNCTION
:
2812 case SRB_STATUS_NOT_STARTED
:
2813 case SRB_STATUS_NOT_IN_USE
:
2814 case SRB_STATUS_FORCE_ABORT
:
2815 case SRB_STATUS_DOMAIN_VALIDATION_FAIL
:
2817 #ifdef AAC_DETAILED_STATUS_INFO
2818 printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
2819 le32_to_cpu(srbreply
->srb_status
) & 0x3F,
2820 aac_get_status_string(
2821 le32_to_cpu(srbreply
->srb_status
) & 0x3F),
2823 le32_to_cpu(srbreply
->scsi_status
));
2825 if ((scsicmd
->cmnd
[0] == ATA_12
)
2826 || (scsicmd
->cmnd
[0] == ATA_16
)) {
2827 if (scsicmd
->cmnd
[2] & (0x01 << 5)) {
2828 scsicmd
->result
= DID_OK
<< 16
2829 | COMMAND_COMPLETE
<< 8;
2832 scsicmd
->result
= DID_ERROR
<< 16
2833 | COMMAND_COMPLETE
<< 8;
2837 scsicmd
->result
= DID_ERROR
<< 16
2838 | COMMAND_COMPLETE
<< 8;
2842 if (le32_to_cpu(srbreply
->scsi_status
) == SAM_STAT_CHECK_CONDITION
) {
2844 scsicmd
->result
|= SAM_STAT_CHECK_CONDITION
;
2845 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
2846 SCSI_SENSE_BUFFERSIZE
);
2847 #ifdef AAC_DETAILED_STATUS_INFO
2848 printk(KERN_WARNING
"aac_srb_callback: check condition, status = %d len=%d\n",
2849 le32_to_cpu(srbreply
->status
), len
);
2851 memcpy(scsicmd
->sense_buffer
, srbreply
->sense_data
, len
);
2854 * OR in the scsi status (already shifted up a bit)
2856 scsicmd
->result
|= le32_to_cpu(srbreply
->scsi_status
);
2858 aac_fib_complete(fibptr
);
2859 aac_fib_free(fibptr
);
2860 scsicmd
->scsi_done(scsicmd
);
2866 * @scsicmd: the scsi command block
2868 * This routine will form a FIB and fill in the aac_srb from the
2869 * scsicmd passed in.
2872 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
)
2874 struct fib
* cmd_fibcontext
;
2875 struct aac_dev
* dev
;
2878 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2879 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
2880 scsicmd
->device
->lun
> 7) {
2881 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2882 scsicmd
->scsi_done(scsicmd
);
2887 * Allocate and initialize a Fib then setup a BlockWrite command
2889 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
2892 status
= aac_adapter_scsi(cmd_fibcontext
, scsicmd
);
2895 * Check that the command queued to the controller
2897 if (status
== -EINPROGRESS
) {
2898 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2902 printk(KERN_WARNING
"aac_srb: aac_fib_send failed with status: %d\n", status
);
2903 aac_fib_complete(cmd_fibcontext
);
2904 aac_fib_free(cmd_fibcontext
);
2909 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*psg
)
2911 struct aac_dev
*dev
;
2912 unsigned long byte_count
= 0;
2915 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2916 // Get rid of old data
2918 psg
->sg
[0].addr
= 0;
2919 psg
->sg
[0].count
= 0;
2921 nseg
= scsi_dma_map(scsicmd
);
2925 struct scatterlist
*sg
;
2928 psg
->count
= cpu_to_le32(nseg
);
2930 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2931 psg
->sg
[i
].addr
= cpu_to_le32(sg_dma_address(sg
));
2932 psg
->sg
[i
].count
= cpu_to_le32(sg_dma_len(sg
));
2933 byte_count
+= sg_dma_len(sg
);
2935 /* hba wants the size to be exact */
2936 if (byte_count
> scsi_bufflen(scsicmd
)) {
2937 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2938 (byte_count
- scsi_bufflen(scsicmd
));
2939 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2940 byte_count
= scsi_bufflen(scsicmd
);
2942 /* Check for command underflow */
2943 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2944 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2945 byte_count
, scsicmd
->underflow
);
2952 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
)
2954 struct aac_dev
*dev
;
2955 unsigned long byte_count
= 0;
2959 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2960 // Get rid of old data
2962 psg
->sg
[0].addr
[0] = 0;
2963 psg
->sg
[0].addr
[1] = 0;
2964 psg
->sg
[0].count
= 0;
2966 nseg
= scsi_dma_map(scsicmd
);
2970 struct scatterlist
*sg
;
2973 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2974 int count
= sg_dma_len(sg
);
2975 addr
= sg_dma_address(sg
);
2976 psg
->sg
[i
].addr
[0] = cpu_to_le32(addr
& 0xffffffff);
2977 psg
->sg
[i
].addr
[1] = cpu_to_le32(addr
>>32);
2978 psg
->sg
[i
].count
= cpu_to_le32(count
);
2979 byte_count
+= count
;
2981 psg
->count
= cpu_to_le32(nseg
);
2982 /* hba wants the size to be exact */
2983 if (byte_count
> scsi_bufflen(scsicmd
)) {
2984 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2985 (byte_count
- scsi_bufflen(scsicmd
));
2986 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2987 byte_count
= scsi_bufflen(scsicmd
);
2989 /* Check for command underflow */
2990 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2991 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2992 byte_count
, scsicmd
->underflow
);
2998 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
)
3000 unsigned long byte_count
= 0;
3003 // Get rid of old data
3005 psg
->sg
[0].next
= 0;
3006 psg
->sg
[0].prev
= 0;
3007 psg
->sg
[0].addr
[0] = 0;
3008 psg
->sg
[0].addr
[1] = 0;
3009 psg
->sg
[0].count
= 0;
3010 psg
->sg
[0].flags
= 0;
3012 nseg
= scsi_dma_map(scsicmd
);
3016 struct scatterlist
*sg
;
3019 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3020 int count
= sg_dma_len(sg
);
3021 u64 addr
= sg_dma_address(sg
);
3022 psg
->sg
[i
].next
= 0;
3023 psg
->sg
[i
].prev
= 0;
3024 psg
->sg
[i
].addr
[1] = cpu_to_le32((u32
)(addr
>>32));
3025 psg
->sg
[i
].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
3026 psg
->sg
[i
].count
= cpu_to_le32(count
);
3027 psg
->sg
[i
].flags
= 0;
3028 byte_count
+= count
;
3030 psg
->count
= cpu_to_le32(nseg
);
3031 /* hba wants the size to be exact */
3032 if (byte_count
> scsi_bufflen(scsicmd
)) {
3033 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3034 (byte_count
- scsi_bufflen(scsicmd
));
3035 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3036 byte_count
= scsi_bufflen(scsicmd
);
3038 /* Check for command underflow */
3039 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
3040 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3041 byte_count
, scsicmd
->underflow
);
3047 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
3048 struct aac_raw_io2
*rio2
, int sg_max
)
3050 unsigned long byte_count
= 0;
3053 nseg
= scsi_dma_map(scsicmd
);
3057 struct scatterlist
*sg
;
3058 int i
, conformable
= 0;
3059 u32 min_size
= PAGE_SIZE
, cur_size
;
3061 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3062 int count
= sg_dma_len(sg
);
3063 u64 addr
= sg_dma_address(sg
);
3065 BUG_ON(i
>= sg_max
);
3066 rio2
->sge
[i
].addrHigh
= cpu_to_le32((u32
)(addr
>>32));
3067 rio2
->sge
[i
].addrLow
= cpu_to_le32((u32
)(addr
& 0xffffffff));
3068 cur_size
= cpu_to_le32(count
);
3069 rio2
->sge
[i
].length
= cur_size
;
3070 rio2
->sge
[i
].flags
= 0;
3073 rio2
->sgeFirstSize
= cur_size
;
3074 } else if (i
== 1) {
3075 rio2
->sgeNominalSize
= cur_size
;
3076 min_size
= cur_size
;
3077 } else if ((i
+1) < nseg
&& cur_size
!= rio2
->sgeNominalSize
) {
3079 if (cur_size
< min_size
)
3080 min_size
= cur_size
;
3082 byte_count
+= count
;
3085 /* hba wants the size to be exact */
3086 if (byte_count
> scsi_bufflen(scsicmd
)) {
3087 u32 temp
= le32_to_cpu(rio2
->sge
[i
-1].length
) -
3088 (byte_count
- scsi_bufflen(scsicmd
));
3089 rio2
->sge
[i
-1].length
= cpu_to_le32(temp
);
3090 byte_count
= scsi_bufflen(scsicmd
);
3093 rio2
->sgeCnt
= cpu_to_le32(nseg
);
3094 rio2
->flags
|= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212
);
3095 /* not conformable: evaluate required sg elements */
3097 int j
, nseg_new
= nseg
, err_found
;
3098 for (i
= min_size
/ PAGE_SIZE
; i
>= 1; --i
) {
3101 for (j
= 1; j
< nseg
- 1; ++j
) {
3102 if (rio2
->sge
[j
].length
% (i
*PAGE_SIZE
)) {
3106 nseg_new
+= (rio2
->sge
[j
].length
/ (i
*PAGE_SIZE
));
3111 if (i
> 0 && nseg_new
<= sg_max
)
3112 aac_convert_sgraw2(rio2
, i
, nseg
, nseg_new
);
3114 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
3116 /* Check for command underflow */
3117 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3118 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3119 byte_count
, scsicmd
->underflow
);
3126 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
, int pages
, int nseg
, int nseg_new
)
3128 struct sge_ieee1212
*sge
;
3132 if (aac_convert_sgl
== 0)
3135 sge
= kmalloc(nseg_new
* sizeof(struct sge_ieee1212
), GFP_ATOMIC
);
3139 for (i
= 1, pos
= 1; i
< nseg
-1; ++i
) {
3140 for (j
= 0; j
< rio2
->sge
[i
].length
/ (pages
* PAGE_SIZE
); ++j
) {
3141 addr_low
= rio2
->sge
[i
].addrLow
+ j
* pages
* PAGE_SIZE
;
3142 sge
[pos
].addrLow
= addr_low
;
3143 sge
[pos
].addrHigh
= rio2
->sge
[i
].addrHigh
;
3144 if (addr_low
< rio2
->sge
[i
].addrLow
)
3145 sge
[pos
].addrHigh
++;
3146 sge
[pos
].length
= pages
* PAGE_SIZE
;
3151 sge
[pos
] = rio2
->sge
[nseg
-1];
3152 memcpy(&rio2
->sge
[1], &sge
[1], (nseg_new
-1)*sizeof(struct sge_ieee1212
));
3155 rio2
->sgeCnt
= cpu_to_le32(nseg_new
);
3156 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
3157 rio2
->sgeNominalSize
= pages
* PAGE_SIZE
;
3161 #ifdef AAC_DETAILED_STATUS_INFO
3163 struct aac_srb_status_info
{
3169 static struct aac_srb_status_info srb_status_info
[] = {
3170 { SRB_STATUS_PENDING
, "Pending Status"},
3171 { SRB_STATUS_SUCCESS
, "Success"},
3172 { SRB_STATUS_ABORTED
, "Aborted Command"},
3173 { SRB_STATUS_ABORT_FAILED
, "Abort Failed"},
3174 { SRB_STATUS_ERROR
, "Error Event"},
3175 { SRB_STATUS_BUSY
, "Device Busy"},
3176 { SRB_STATUS_INVALID_REQUEST
, "Invalid Request"},
3177 { SRB_STATUS_INVALID_PATH_ID
, "Invalid Path ID"},
3178 { SRB_STATUS_NO_DEVICE
, "No Device"},
3179 { SRB_STATUS_TIMEOUT
, "Timeout"},
3180 { SRB_STATUS_SELECTION_TIMEOUT
, "Selection Timeout"},
3181 { SRB_STATUS_COMMAND_TIMEOUT
, "Command Timeout"},
3182 { SRB_STATUS_MESSAGE_REJECTED
, "Message Rejected"},
3183 { SRB_STATUS_BUS_RESET
, "Bus Reset"},
3184 { SRB_STATUS_PARITY_ERROR
, "Parity Error"},
3185 { SRB_STATUS_REQUEST_SENSE_FAILED
,"Request Sense Failed"},
3186 { SRB_STATUS_NO_HBA
, "No HBA"},
3187 { SRB_STATUS_DATA_OVERRUN
, "Data Overrun/Data Underrun"},
3188 { SRB_STATUS_UNEXPECTED_BUS_FREE
,"Unexpected Bus Free"},
3189 { SRB_STATUS_PHASE_SEQUENCE_FAILURE
,"Phase Error"},
3190 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH
,"Bad Srb Block Length"},
3191 { SRB_STATUS_REQUEST_FLUSHED
, "Request Flushed"},
3192 { SRB_STATUS_DELAYED_RETRY
, "Delayed Retry"},
3193 { SRB_STATUS_INVALID_LUN
, "Invalid LUN"},
3194 { SRB_STATUS_INVALID_TARGET_ID
, "Invalid TARGET ID"},
3195 { SRB_STATUS_BAD_FUNCTION
, "Bad Function"},
3196 { SRB_STATUS_ERROR_RECOVERY
, "Error Recovery"},
3197 { SRB_STATUS_NOT_STARTED
, "Not Started"},
3198 { SRB_STATUS_NOT_IN_USE
, "Not In Use"},
3199 { SRB_STATUS_FORCE_ABORT
, "Force Abort"},
3200 { SRB_STATUS_DOMAIN_VALIDATION_FAIL
,"Domain Validation Failure"},
3201 { 0xff, "Unknown Error"}
3204 char *aac_get_status_string(u32 status
)
3208 for (i
= 0; i
< ARRAY_SIZE(srb_status_info
); i
++)
3209 if (srb_status_info
[i
].status
== status
)
3210 return srb_status_info
[i
].str
;
3212 return "Bad Status Code";