1 // SPDX-License-Identifier: GPL-2.0+
5 * Copyright (C) 2009 - 2013
6 * Johan Hovold (jhovold@gmail.com)
7 * Copyright (C) 1999 - 2001
8 * Greg Kroah-Hartman (greg@kroah.com)
9 * Bill Ryder (bryder@sgi.com)
11 * Kuba Ober (kuba@mareimbrium.org)
13 * See Documentation/usb/usb-serial.txt for more information on using this
16 * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
17 * and extra documentation
19 * Change entries from 2004 and earlier can be found in versions of this
20 * file in kernel versions prior to the 2.6.24 release.
24 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
25 /* Thanx to FTDI for so kindly providing details of the protocol required */
26 /* to talk to the device */
27 /* Thanx to gkh and the rest of the usb dev group for all code I have
30 #include <linux/kernel.h>
31 #include <linux/errno.h>
32 #include <linux/slab.h>
33 #include <linux/tty.h>
34 #include <linux/tty_driver.h>
35 #include <linux/tty_flip.h>
36 #include <linux/module.h>
37 #include <linux/spinlock.h>
38 #include <linux/mutex.h>
39 #include <linux/uaccess.h>
40 #include <linux/usb.h>
41 #include <linux/serial.h>
42 #include <linux/usb/serial.h>
44 #include "ftdi_sio_ids.h"
46 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
47 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
51 enum ftdi_chip_type chip_type
;
52 /* type of device, either SIO or FT8U232AM */
53 int baud_base
; /* baud base clock for divisor setting */
54 int custom_divisor
; /* custom_divisor kludge, this is for
55 baud_base (different from what goes to the
57 __u16 last_set_data_urb_value
;
58 /* the last data state set - needed for doing
61 int flags
; /* some ASYNC_xxxx flags are supported */
62 unsigned long last_dtr_rts
; /* saved modem control outputs */
63 char prev_status
; /* Used for TIOCMIWAIT */
64 char transmit_empty
; /* If transmitter is empty or not */
65 __u16 interface
; /* FT2232C, FT2232H or FT4232H port interface
68 speed_t force_baud
; /* if non-zero, force the baud rate to
70 int force_rtscts
; /* if non-zero, force RTS-CTS to always
73 unsigned int latency
; /* latency setting in use */
74 unsigned short max_packet_size
;
75 struct mutex cfg_lock
; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
78 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
79 struct ftdi_sio_quirk
{
80 int (*probe
)(struct usb_serial
*);
81 /* Special settings for probed ports. */
82 void (*port_probe
)(struct ftdi_private
*);
85 static int ftdi_jtag_probe(struct usb_serial
*serial
);
86 static int ftdi_NDI_device_setup(struct usb_serial
*serial
);
87 static int ftdi_stmclite_probe(struct usb_serial
*serial
);
88 static int ftdi_8u2232c_probe(struct usb_serial
*serial
);
89 static void ftdi_USB_UIRT_setup(struct ftdi_private
*priv
);
90 static void ftdi_HE_TIRA1_setup(struct ftdi_private
*priv
);
92 static const struct ftdi_sio_quirk ftdi_jtag_quirk
= {
93 .probe
= ftdi_jtag_probe
,
96 static const struct ftdi_sio_quirk ftdi_NDI_device_quirk
= {
97 .probe
= ftdi_NDI_device_setup
,
100 static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk
= {
101 .port_probe
= ftdi_USB_UIRT_setup
,
104 static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk
= {
105 .port_probe
= ftdi_HE_TIRA1_setup
,
108 static const struct ftdi_sio_quirk ftdi_stmclite_quirk
= {
109 .probe
= ftdi_stmclite_probe
,
112 static const struct ftdi_sio_quirk ftdi_8u2232c_quirk
= {
113 .probe
= ftdi_8u2232c_probe
,
117 * The 8U232AM has the same API as the sio except for:
118 * - it can support MUCH higher baudrates; up to:
119 * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
121 * so .. 8U232AM's baudrate setting codes are different
122 * - it has a two byte status code.
123 * - it returns characters every 16ms (the FTDI does it every 40ms)
125 * the bcdDevice value is used to differentiate FT232BM and FT245BM from
126 * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
127 * combinations in both tables.
128 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
129 * but I don't know if those ever went into mass production. [Ian Abbott]
135 * Device ID not listed? Test it using
136 * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
138 static const struct usb_device_id id_table_combined
[] = {
139 { USB_DEVICE(FTDI_VID
, FTDI_BRICK_PID
) },
140 { USB_DEVICE(FTDI_VID
, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID
) },
141 { USB_DEVICE(FTDI_VID
, FTDI_CTI_MINI_PID
) },
142 { USB_DEVICE(FTDI_VID
, FTDI_CTI_NANO_PID
) },
143 { USB_DEVICE(FTDI_VID
, FTDI_AMC232_PID
) },
144 { USB_DEVICE(FTDI_VID
, FTDI_CANUSB_PID
) },
145 { USB_DEVICE(FTDI_VID
, FTDI_CANDAPTER_PID
) },
146 { USB_DEVICE(FTDI_VID
, FTDI_BM_ATOM_NANO_PID
) },
147 { USB_DEVICE(FTDI_VID
, FTDI_NXTCAM_PID
) },
148 { USB_DEVICE(FTDI_VID
, FTDI_EV3CON_PID
) },
149 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_0_PID
) },
150 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_1_PID
) },
151 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_2_PID
) },
152 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_3_PID
) },
153 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_4_PID
) },
154 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_5_PID
) },
155 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_6_PID
) },
156 { USB_DEVICE(FTDI_VID
, FTDI_SCS_DEVICE_7_PID
) },
157 { USB_DEVICE(FTDI_VID
, FTDI_USINT_CAT_PID
) },
158 { USB_DEVICE(FTDI_VID
, FTDI_USINT_WKEY_PID
) },
159 { USB_DEVICE(FTDI_VID
, FTDI_USINT_RS232_PID
) },
160 { USB_DEVICE(FTDI_VID
, FTDI_ACTZWAVE_PID
) },
161 { USB_DEVICE(FTDI_VID
, FTDI_IRTRANS_PID
) },
162 { USB_DEVICE(FTDI_VID
, FTDI_IPLUS_PID
) },
163 { USB_DEVICE(FTDI_VID
, FTDI_IPLUS2_PID
) },
164 { USB_DEVICE(FTDI_VID
, FTDI_DMX4ALL
) },
165 { USB_DEVICE(FTDI_VID
, FTDI_SIO_PID
) },
166 { USB_DEVICE(FTDI_VID
, FTDI_8U232AM_PID
) },
167 { USB_DEVICE(FTDI_VID
, FTDI_8U232AM_ALT_PID
) },
168 { USB_DEVICE(FTDI_VID
, FTDI_232RL_PID
) },
169 { USB_DEVICE(FTDI_VID
, FTDI_8U2232C_PID
) ,
170 .driver_info
= (kernel_ulong_t
)&ftdi_8u2232c_quirk
},
171 { USB_DEVICE(FTDI_VID
, FTDI_4232H_PID
) },
172 { USB_DEVICE(FTDI_VID
, FTDI_232H_PID
) },
173 { USB_DEVICE(FTDI_VID
, FTDI_FTX_PID
) },
174 { USB_DEVICE(FTDI_VID
, FTDI_MICRO_CHAMELEON_PID
) },
175 { USB_DEVICE(FTDI_VID
, FTDI_RELAIS_PID
) },
176 { USB_DEVICE(FTDI_VID
, FTDI_OPENDCC_PID
) },
177 { USB_DEVICE(FTDI_VID
, FTDI_OPENDCC_SNIFFER_PID
) },
178 { USB_DEVICE(FTDI_VID
, FTDI_OPENDCC_THROTTLE_PID
) },
179 { USB_DEVICE(FTDI_VID
, FTDI_OPENDCC_GATEWAY_PID
) },
180 { USB_DEVICE(FTDI_VID
, FTDI_OPENDCC_GBM_PID
) },
181 { USB_DEVICE(FTDI_VID
, FTDI_OPENDCC_GBM_BOOST_PID
) },
182 { USB_DEVICE(NEWPORT_VID
, NEWPORT_AGILIS_PID
) },
183 { USB_DEVICE(NEWPORT_VID
, NEWPORT_CONEX_CC_PID
) },
184 { USB_DEVICE(NEWPORT_VID
, NEWPORT_CONEX_AGP_PID
) },
185 { USB_DEVICE(INTERBIOMETRICS_VID
, INTERBIOMETRICS_IOBOARD_PID
) },
186 { USB_DEVICE(INTERBIOMETRICS_VID
, INTERBIOMETRICS_MINI_IOBOARD_PID
) },
187 { USB_DEVICE(FTDI_VID
, FTDI_SPROG_II
) },
188 { USB_DEVICE(FTDI_VID
, FTDI_TAGSYS_LP101_PID
) },
189 { USB_DEVICE(FTDI_VID
, FTDI_TAGSYS_P200X_PID
) },
190 { USB_DEVICE(FTDI_VID
, FTDI_LENZ_LIUSB_PID
) },
191 { USB_DEVICE(FTDI_VID
, FTDI_XF_632_PID
) },
192 { USB_DEVICE(FTDI_VID
, FTDI_XF_634_PID
) },
193 { USB_DEVICE(FTDI_VID
, FTDI_XF_547_PID
) },
194 { USB_DEVICE(FTDI_VID
, FTDI_XF_633_PID
) },
195 { USB_DEVICE(FTDI_VID
, FTDI_XF_631_PID
) },
196 { USB_DEVICE(FTDI_VID
, FTDI_XF_635_PID
) },
197 { USB_DEVICE(FTDI_VID
, FTDI_XF_640_PID
) },
198 { USB_DEVICE(FTDI_VID
, FTDI_XF_642_PID
) },
199 { USB_DEVICE(FTDI_VID
, FTDI_DSS20_PID
) },
200 { USB_DEVICE(FTDI_VID
, FTDI_URBAN_0_PID
) },
201 { USB_DEVICE(FTDI_VID
, FTDI_URBAN_1_PID
) },
202 { USB_DEVICE(FTDI_NF_RIC_VID
, FTDI_NF_RIC_PID
) },
203 { USB_DEVICE(FTDI_VID
, FTDI_VNHCPCUSB_D_PID
) },
204 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_0_PID
) },
205 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_1_PID
) },
206 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_2_PID
) },
207 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_3_PID
) },
208 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_4_PID
) },
209 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_5_PID
) },
210 { USB_DEVICE(FTDI_VID
, FTDI_MTXORB_6_PID
) },
211 { USB_DEVICE(FTDI_VID
, FTDI_R2000KU_TRUE_RNG
) },
212 { USB_DEVICE(FTDI_VID
, FTDI_VARDAAN_PID
) },
213 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0100_PID
) },
214 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0101_PID
) },
215 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0102_PID
) },
216 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0103_PID
) },
217 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0104_PID
) },
218 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0105_PID
) },
219 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0106_PID
) },
220 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0107_PID
) },
221 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0108_PID
) },
222 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0109_PID
) },
223 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_010A_PID
) },
224 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_010B_PID
) },
225 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_010C_PID
) },
226 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_010D_PID
) },
227 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_010E_PID
) },
228 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_010F_PID
) },
229 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0110_PID
) },
230 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0111_PID
) },
231 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0112_PID
) },
232 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0113_PID
) },
233 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0114_PID
) },
234 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0115_PID
) },
235 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0116_PID
) },
236 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0117_PID
) },
237 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0118_PID
) },
238 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0119_PID
) },
239 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_011A_PID
) },
240 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_011B_PID
) },
241 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_011C_PID
) },
242 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_011D_PID
) },
243 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_011E_PID
) },
244 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_011F_PID
) },
245 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0120_PID
) },
246 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0121_PID
) },
247 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0122_PID
) },
248 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0123_PID
) },
249 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0124_PID
) },
250 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0125_PID
) },
251 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0126_PID
) },
252 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0127_PID
) },
253 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0128_PID
) },
254 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0129_PID
) },
255 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_012A_PID
) },
256 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_012B_PID
) },
257 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_012C_PID
) },
258 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_012D_PID
) },
259 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_012E_PID
) },
260 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_012F_PID
) },
261 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0130_PID
) },
262 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0131_PID
) },
263 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0132_PID
) },
264 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0133_PID
) },
265 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0134_PID
) },
266 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0135_PID
) },
267 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0136_PID
) },
268 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0137_PID
) },
269 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0138_PID
) },
270 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0139_PID
) },
271 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_013A_PID
) },
272 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_013B_PID
) },
273 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_013C_PID
) },
274 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_013D_PID
) },
275 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_013E_PID
) },
276 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_013F_PID
) },
277 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0140_PID
) },
278 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0141_PID
) },
279 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0142_PID
) },
280 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0143_PID
) },
281 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0144_PID
) },
282 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0145_PID
) },
283 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0146_PID
) },
284 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0147_PID
) },
285 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0148_PID
) },
286 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0149_PID
) },
287 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_014A_PID
) },
288 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_014B_PID
) },
289 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_014C_PID
) },
290 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_014D_PID
) },
291 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_014E_PID
) },
292 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_014F_PID
) },
293 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0150_PID
) },
294 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0151_PID
) },
295 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0152_PID
) },
296 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0153_PID
) },
297 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0154_PID
) },
298 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0155_PID
) },
299 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0156_PID
) },
300 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0157_PID
) },
301 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0158_PID
) },
302 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0159_PID
) },
303 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_015A_PID
) },
304 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_015B_PID
) },
305 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_015C_PID
) },
306 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_015D_PID
) },
307 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_015E_PID
) },
308 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_015F_PID
) },
309 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0160_PID
) },
310 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0161_PID
) },
311 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0162_PID
) },
312 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0163_PID
) },
313 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0164_PID
) },
314 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0165_PID
) },
315 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0166_PID
) },
316 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0167_PID
) },
317 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0168_PID
) },
318 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0169_PID
) },
319 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_016A_PID
) },
320 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_016B_PID
) },
321 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_016C_PID
) },
322 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_016D_PID
) },
323 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_016E_PID
) },
324 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_016F_PID
) },
325 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0170_PID
) },
326 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0171_PID
) },
327 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0172_PID
) },
328 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0173_PID
) },
329 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0174_PID
) },
330 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0175_PID
) },
331 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0176_PID
) },
332 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0177_PID
) },
333 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0178_PID
) },
334 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0179_PID
) },
335 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_017A_PID
) },
336 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_017B_PID
) },
337 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_017C_PID
) },
338 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_017D_PID
) },
339 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_017E_PID
) },
340 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_017F_PID
) },
341 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0180_PID
) },
342 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0181_PID
) },
343 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0182_PID
) },
344 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0183_PID
) },
345 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0184_PID
) },
346 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0185_PID
) },
347 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0186_PID
) },
348 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0187_PID
) },
349 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0188_PID
) },
350 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0189_PID
) },
351 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_018A_PID
) },
352 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_018B_PID
) },
353 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_018C_PID
) },
354 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_018D_PID
) },
355 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_018E_PID
) },
356 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_018F_PID
) },
357 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0190_PID
) },
358 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0191_PID
) },
359 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0192_PID
) },
360 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0193_PID
) },
361 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0194_PID
) },
362 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0195_PID
) },
363 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0196_PID
) },
364 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0197_PID
) },
365 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0198_PID
) },
366 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_0199_PID
) },
367 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_019A_PID
) },
368 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_019B_PID
) },
369 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_019C_PID
) },
370 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_019D_PID
) },
371 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_019E_PID
) },
372 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_019F_PID
) },
373 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A0_PID
) },
374 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A1_PID
) },
375 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A2_PID
) },
376 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A3_PID
) },
377 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A4_PID
) },
378 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A5_PID
) },
379 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A6_PID
) },
380 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A7_PID
) },
381 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A8_PID
) },
382 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01A9_PID
) },
383 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01AA_PID
) },
384 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01AB_PID
) },
385 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01AC_PID
) },
386 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01AD_PID
) },
387 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01AE_PID
) },
388 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01AF_PID
) },
389 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B0_PID
) },
390 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B1_PID
) },
391 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B2_PID
) },
392 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B3_PID
) },
393 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B4_PID
) },
394 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B5_PID
) },
395 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B6_PID
) },
396 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B7_PID
) },
397 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B8_PID
) },
398 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01B9_PID
) },
399 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01BA_PID
) },
400 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01BB_PID
) },
401 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01BC_PID
) },
402 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01BD_PID
) },
403 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01BE_PID
) },
404 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01BF_PID
) },
405 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C0_PID
) },
406 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C1_PID
) },
407 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C2_PID
) },
408 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C3_PID
) },
409 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C4_PID
) },
410 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C5_PID
) },
411 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C6_PID
) },
412 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C7_PID
) },
413 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C8_PID
) },
414 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01C9_PID
) },
415 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01CA_PID
) },
416 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01CB_PID
) },
417 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01CC_PID
) },
418 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01CD_PID
) },
419 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01CE_PID
) },
420 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01CF_PID
) },
421 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D0_PID
) },
422 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D1_PID
) },
423 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D2_PID
) },
424 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D3_PID
) },
425 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D4_PID
) },
426 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D5_PID
) },
427 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D6_PID
) },
428 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D7_PID
) },
429 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D8_PID
) },
430 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01D9_PID
) },
431 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01DA_PID
) },
432 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01DB_PID
) },
433 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01DC_PID
) },
434 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01DD_PID
) },
435 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01DE_PID
) },
436 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01DF_PID
) },
437 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E0_PID
) },
438 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E1_PID
) },
439 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E2_PID
) },
440 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E3_PID
) },
441 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E4_PID
) },
442 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E5_PID
) },
443 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E6_PID
) },
444 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E7_PID
) },
445 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E8_PID
) },
446 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01E9_PID
) },
447 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01EA_PID
) },
448 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01EB_PID
) },
449 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01EC_PID
) },
450 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01ED_PID
) },
451 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01EE_PID
) },
452 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01EF_PID
) },
453 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F0_PID
) },
454 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F1_PID
) },
455 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F2_PID
) },
456 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F3_PID
) },
457 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F4_PID
) },
458 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F5_PID
) },
459 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F6_PID
) },
460 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F7_PID
) },
461 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F8_PID
) },
462 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01F9_PID
) },
463 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01FA_PID
) },
464 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01FB_PID
) },
465 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01FC_PID
) },
466 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01FD_PID
) },
467 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01FE_PID
) },
468 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_01FF_PID
) },
469 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_4701_PID
) },
470 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9300_PID
) },
471 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9301_PID
) },
472 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9302_PID
) },
473 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9303_PID
) },
474 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9304_PID
) },
475 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9305_PID
) },
476 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9306_PID
) },
477 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9307_PID
) },
478 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9308_PID
) },
479 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9309_PID
) },
480 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_930A_PID
) },
481 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_930B_PID
) },
482 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_930C_PID
) },
483 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_930D_PID
) },
484 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_930E_PID
) },
485 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_930F_PID
) },
486 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9310_PID
) },
487 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9311_PID
) },
488 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9312_PID
) },
489 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9313_PID
) },
490 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9314_PID
) },
491 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9315_PID
) },
492 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9316_PID
) },
493 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9317_PID
) },
494 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9318_PID
) },
495 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_9319_PID
) },
496 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_931A_PID
) },
497 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_931B_PID
) },
498 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_931C_PID
) },
499 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_931D_PID
) },
500 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_931E_PID
) },
501 { USB_DEVICE(MTXORB_VID
, MTXORB_FTDI_RANGE_931F_PID
) },
502 { USB_DEVICE(FTDI_VID
, FTDI_PERLE_ULTRAPORT_PID
) },
503 { USB_DEVICE(FTDI_VID
, FTDI_PIEGROUP_PID
) },
504 { USB_DEVICE(FTDI_VID
, FTDI_TNC_X_PID
) },
505 { USB_DEVICE(FTDI_VID
, FTDI_USBX_707_PID
) },
506 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2101_PID
) },
507 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2102_PID
) },
508 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2103_PID
) },
509 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2104_PID
) },
510 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2106_PID
) },
511 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2201_1_PID
) },
512 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2201_2_PID
) },
513 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2202_1_PID
) },
514 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2202_2_PID
) },
515 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2203_1_PID
) },
516 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2203_2_PID
) },
517 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2401_1_PID
) },
518 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2401_2_PID
) },
519 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2401_3_PID
) },
520 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2401_4_PID
) },
521 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2402_1_PID
) },
522 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2402_2_PID
) },
523 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2402_3_PID
) },
524 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2402_4_PID
) },
525 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2403_1_PID
) },
526 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2403_2_PID
) },
527 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2403_3_PID
) },
528 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2403_4_PID
) },
529 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_1_PID
) },
530 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_2_PID
) },
531 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_3_PID
) },
532 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_4_PID
) },
533 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_5_PID
) },
534 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_6_PID
) },
535 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_7_PID
) },
536 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2801_8_PID
) },
537 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_1_PID
) },
538 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_2_PID
) },
539 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_3_PID
) },
540 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_4_PID
) },
541 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_5_PID
) },
542 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_6_PID
) },
543 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_7_PID
) },
544 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2802_8_PID
) },
545 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_1_PID
) },
546 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_2_PID
) },
547 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_3_PID
) },
548 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_4_PID
) },
549 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_5_PID
) },
550 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_6_PID
) },
551 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_7_PID
) },
552 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803_8_PID
) },
553 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803R_1_PID
) },
554 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803R_2_PID
) },
555 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803R_3_PID
) },
556 { USB_DEVICE(SEALEVEL_VID
, SEALEVEL_2803R_4_PID
) },
557 { USB_DEVICE(IDTECH_VID
, IDTECH_IDT1221U_PID
) },
558 { USB_DEVICE(OCT_VID
, OCT_US101_PID
) },
559 { USB_DEVICE(OCT_VID
, OCT_DK201_PID
) },
560 { USB_DEVICE(FTDI_VID
, FTDI_HE_TIRA1_PID
),
561 .driver_info
= (kernel_ulong_t
)&ftdi_HE_TIRA1_quirk
},
562 { USB_DEVICE(FTDI_VID
, FTDI_USB_UIRT_PID
),
563 .driver_info
= (kernel_ulong_t
)&ftdi_USB_UIRT_quirk
},
564 { USB_DEVICE(FTDI_VID
, PROTEGO_SPECIAL_1
) },
565 { USB_DEVICE(FTDI_VID
, PROTEGO_R2X0
) },
566 { USB_DEVICE(FTDI_VID
, PROTEGO_SPECIAL_3
) },
567 { USB_DEVICE(FTDI_VID
, PROTEGO_SPECIAL_4
) },
568 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E808_PID
) },
569 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E809_PID
) },
570 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E80A_PID
) },
571 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E80B_PID
) },
572 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E80C_PID
) },
573 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E80D_PID
) },
574 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E80E_PID
) },
575 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E80F_PID
) },
576 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E888_PID
) },
577 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E889_PID
) },
578 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E88A_PID
) },
579 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E88B_PID
) },
580 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E88C_PID
) },
581 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E88D_PID
) },
582 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E88E_PID
) },
583 { USB_DEVICE(FTDI_VID
, FTDI_GUDEADS_E88F_PID
) },
584 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UO100_PID
) },
585 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UM100_PID
) },
586 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UR100_PID
) },
587 { USB_DEVICE(FTDI_VID
, FTDI_ELV_ALC8500_PID
) },
588 { USB_DEVICE(FTDI_VID
, FTDI_PYRAMID_PID
) },
589 { USB_DEVICE(FTDI_VID
, FTDI_ELV_FHZ1000PC_PID
) },
590 { USB_DEVICE(FTDI_VID
, FTDI_IBS_US485_PID
) },
591 { USB_DEVICE(FTDI_VID
, FTDI_IBS_PICPRO_PID
) },
592 { USB_DEVICE(FTDI_VID
, FTDI_IBS_PCMCIA_PID
) },
593 { USB_DEVICE(FTDI_VID
, FTDI_IBS_PK1_PID
) },
594 { USB_DEVICE(FTDI_VID
, FTDI_IBS_RS232MON_PID
) },
595 { USB_DEVICE(FTDI_VID
, FTDI_IBS_APP70_PID
) },
596 { USB_DEVICE(FTDI_VID
, FTDI_IBS_PEDO_PID
) },
597 { USB_DEVICE(FTDI_VID
, FTDI_IBS_PROD_PID
) },
598 { USB_DEVICE(FTDI_VID
, FTDI_TAVIR_STK500_PID
) },
599 { USB_DEVICE(FTDI_VID
, FTDI_TIAO_UMPA_PID
),
600 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
601 { USB_DEVICE(FTDI_VID
, FTDI_NT_ORIONLXM_PID
),
602 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
603 { USB_DEVICE(FTDI_VID
, FTDI_SYNAPSE_SS200_PID
) },
604 { USB_DEVICE(FTDI_VID
, FTDI_CUSTOMWARE_MINIPLEX_PID
) },
605 { USB_DEVICE(FTDI_VID
, FTDI_CUSTOMWARE_MINIPLEX2_PID
) },
606 { USB_DEVICE(FTDI_VID
, FTDI_CUSTOMWARE_MINIPLEX2WI_PID
) },
607 { USB_DEVICE(FTDI_VID
, FTDI_CUSTOMWARE_MINIPLEX3_PID
) },
611 { USB_DEVICE(FTDI_ELV_VID
, FTDI_ELV_WS300_PID
) },
612 { USB_DEVICE(FTDI_VID
, FTDI_ELV_USR_PID
) },
613 { USB_DEVICE(FTDI_VID
, FTDI_ELV_MSM1_PID
) },
614 { USB_DEVICE(FTDI_VID
, FTDI_ELV_KL100_PID
) },
615 { USB_DEVICE(FTDI_VID
, FTDI_ELV_WS550_PID
) },
616 { USB_DEVICE(FTDI_VID
, FTDI_ELV_EC3000_PID
) },
617 { USB_DEVICE(FTDI_VID
, FTDI_ELV_WS888_PID
) },
618 { USB_DEVICE(FTDI_VID
, FTDI_ELV_TWS550_PID
) },
619 { USB_DEVICE(FTDI_VID
, FTDI_ELV_FEM_PID
) },
620 { USB_DEVICE(FTDI_VID
, FTDI_ELV_CLI7000_PID
) },
621 { USB_DEVICE(FTDI_VID
, FTDI_ELV_PPS7330_PID
) },
622 { USB_DEVICE(FTDI_VID
, FTDI_ELV_TFM100_PID
) },
623 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UDF77_PID
) },
624 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UIO88_PID
) },
625 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UAD8_PID
) },
626 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UDA7_PID
) },
627 { USB_DEVICE(FTDI_VID
, FTDI_ELV_USI2_PID
) },
628 { USB_DEVICE(FTDI_VID
, FTDI_ELV_T1100_PID
) },
629 { USB_DEVICE(FTDI_VID
, FTDI_ELV_PCD200_PID
) },
630 { USB_DEVICE(FTDI_VID
, FTDI_ELV_ULA200_PID
) },
631 { USB_DEVICE(FTDI_VID
, FTDI_ELV_CSI8_PID
) },
632 { USB_DEVICE(FTDI_VID
, FTDI_ELV_EM1000DL_PID
) },
633 { USB_DEVICE(FTDI_VID
, FTDI_ELV_PCK100_PID
) },
634 { USB_DEVICE(FTDI_VID
, FTDI_ELV_RFP500_PID
) },
635 { USB_DEVICE(FTDI_VID
, FTDI_ELV_FS20SIG_PID
) },
636 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UTP8_PID
) },
637 { USB_DEVICE(FTDI_VID
, FTDI_ELV_WS300PC_PID
) },
638 { USB_DEVICE(FTDI_VID
, FTDI_ELV_WS444PC_PID
) },
639 { USB_DEVICE(FTDI_VID
, FTDI_ELV_FHZ1300PC_PID
) },
640 { USB_DEVICE(FTDI_VID
, FTDI_ELV_EM1010PC_PID
) },
641 { USB_DEVICE(FTDI_VID
, FTDI_ELV_WS500_PID
) },
642 { USB_DEVICE(FTDI_VID
, FTDI_ELV_HS485_PID
) },
643 { USB_DEVICE(FTDI_VID
, FTDI_ELV_UMS100_PID
) },
644 { USB_DEVICE(FTDI_VID
, FTDI_ELV_TFD128_PID
) },
645 { USB_DEVICE(FTDI_VID
, FTDI_ELV_FM3RX_PID
) },
646 { USB_DEVICE(FTDI_VID
, FTDI_ELV_WS777_PID
) },
647 { USB_DEVICE(FTDI_VID
, FTDI_PALMSENS_PID
) },
648 { USB_DEVICE(FTDI_VID
, FTDI_IVIUM_XSTAT_PID
) },
649 { USB_DEVICE(FTDI_VID
, LINX_SDMUSBQSS_PID
) },
650 { USB_DEVICE(FTDI_VID
, LINX_MASTERDEVEL2_PID
) },
651 { USB_DEVICE(FTDI_VID
, LINX_FUTURE_0_PID
) },
652 { USB_DEVICE(FTDI_VID
, LINX_FUTURE_1_PID
) },
653 { USB_DEVICE(FTDI_VID
, LINX_FUTURE_2_PID
) },
654 { USB_DEVICE(FTDI_VID
, FTDI_CCSICDU20_0_PID
) },
655 { USB_DEVICE(FTDI_VID
, FTDI_CCSICDU40_1_PID
) },
656 { USB_DEVICE(FTDI_VID
, FTDI_CCSMACHX_2_PID
) },
657 { USB_DEVICE(FTDI_VID
, FTDI_CCSLOAD_N_GO_3_PID
) },
658 { USB_DEVICE(FTDI_VID
, FTDI_CCSICDU64_4_PID
) },
659 { USB_DEVICE(FTDI_VID
, FTDI_CCSPRIME8_5_PID
) },
660 { USB_DEVICE(FTDI_VID
, INSIDE_ACCESSO
) },
661 { USB_DEVICE(INTREPID_VID
, INTREPID_VALUECAN_PID
) },
662 { USB_DEVICE(INTREPID_VID
, INTREPID_NEOVI_PID
) },
663 { USB_DEVICE(FALCOM_VID
, FALCOM_TWIST_PID
) },
664 { USB_DEVICE(FALCOM_VID
, FALCOM_SAMBA_PID
) },
665 { USB_DEVICE(FTDI_VID
, FTDI_SUUNTO_SPORTS_PID
) },
666 { USB_DEVICE(FTDI_VID
, FTDI_OCEANIC_PID
) },
667 { USB_DEVICE(TTI_VID
, TTI_QL355P_PID
) },
668 { USB_DEVICE(FTDI_VID
, FTDI_RM_CANVIEW_PID
) },
669 { USB_DEVICE(ACTON_VID
, ACTON_SPECTRAPRO_PID
) },
670 { USB_DEVICE(CONTEC_VID
, CONTEC_COM1USBH_PID
) },
671 { USB_DEVICE(MITSUBISHI_VID
, MITSUBISHI_FXUSB_PID
) },
672 { USB_DEVICE(BANDB_VID
, BANDB_USOTL4_PID
) },
673 { USB_DEVICE(BANDB_VID
, BANDB_USTL4_PID
) },
674 { USB_DEVICE(BANDB_VID
, BANDB_USO9ML2_PID
) },
675 { USB_DEVICE(BANDB_VID
, BANDB_USOPTL4_PID
) },
676 { USB_DEVICE(BANDB_VID
, BANDB_USPTL4_PID
) },
677 { USB_DEVICE(BANDB_VID
, BANDB_USO9ML2DR_2_PID
) },
678 { USB_DEVICE(BANDB_VID
, BANDB_USO9ML2DR_PID
) },
679 { USB_DEVICE(BANDB_VID
, BANDB_USOPTL4DR2_PID
) },
680 { USB_DEVICE(BANDB_VID
, BANDB_USOPTL4DR_PID
) },
681 { USB_DEVICE(BANDB_VID
, BANDB_485USB9F_2W_PID
) },
682 { USB_DEVICE(BANDB_VID
, BANDB_485USB9F_4W_PID
) },
683 { USB_DEVICE(BANDB_VID
, BANDB_232USB9M_PID
) },
684 { USB_DEVICE(BANDB_VID
, BANDB_485USBTB_2W_PID
) },
685 { USB_DEVICE(BANDB_VID
, BANDB_485USBTB_4W_PID
) },
686 { USB_DEVICE(BANDB_VID
, BANDB_TTL5USB9M_PID
) },
687 { USB_DEVICE(BANDB_VID
, BANDB_TTL3USB9M_PID
) },
688 { USB_DEVICE(BANDB_VID
, BANDB_ZZ_PROG1_USB_PID
) },
689 { USB_DEVICE(FTDI_VID
, EVER_ECO_PRO_CDS
) },
690 { USB_DEVICE(FTDI_VID
, FTDI_4N_GALAXY_DE_1_PID
) },
691 { USB_DEVICE(FTDI_VID
, FTDI_4N_GALAXY_DE_2_PID
) },
692 { USB_DEVICE(FTDI_VID
, FTDI_4N_GALAXY_DE_3_PID
) },
693 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_0_PID
) },
694 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_1_PID
) },
695 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_2_PID
) },
696 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_3_PID
) },
697 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_4_PID
) },
698 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_5_PID
) },
699 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_6_PID
) },
700 { USB_DEVICE(FTDI_VID
, XSENS_CONVERTER_7_PID
) },
701 { USB_DEVICE(XSENS_VID
, XSENS_AWINDA_DONGLE_PID
) },
702 { USB_DEVICE(XSENS_VID
, XSENS_AWINDA_STATION_PID
) },
703 { USB_DEVICE(XSENS_VID
, XSENS_CONVERTER_PID
) },
704 { USB_DEVICE(XSENS_VID
, XSENS_MTDEVBOARD_PID
) },
705 { USB_DEVICE(XSENS_VID
, XSENS_MTW_PID
) },
706 { USB_DEVICE(FTDI_VID
, FTDI_OMNI1509
) },
707 { USB_DEVICE(MOBILITY_VID
, MOBILITY_USB_SERIAL_PID
) },
708 { USB_DEVICE(FTDI_VID
, FTDI_ACTIVE_ROBOTS_PID
) },
709 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_KW_PID
) },
710 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_YS_PID
) },
711 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_Y6_PID
) },
712 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_Y8_PID
) },
713 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_IC_PID
) },
714 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_DB9_PID
) },
715 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_RS232_PID
) },
716 { USB_DEVICE(FTDI_VID
, FTDI_MHAM_Y9_PID
) },
717 { USB_DEVICE(FTDI_VID
, FTDI_TERATRONIK_VCP_PID
) },
718 { USB_DEVICE(FTDI_VID
, FTDI_TERATRONIK_D2XX_PID
) },
719 { USB_DEVICE(EVOLUTION_VID
, EVOLUTION_ER1_PID
) },
720 { USB_DEVICE(EVOLUTION_VID
, EVO_HYBRID_PID
) },
721 { USB_DEVICE(EVOLUTION_VID
, EVO_RCM4_PID
) },
722 { USB_DEVICE(FTDI_VID
, FTDI_ARTEMIS_PID
) },
723 { USB_DEVICE(FTDI_VID
, FTDI_ATIK_ATK16_PID
) },
724 { USB_DEVICE(FTDI_VID
, FTDI_ATIK_ATK16C_PID
) },
725 { USB_DEVICE(FTDI_VID
, FTDI_ATIK_ATK16HR_PID
) },
726 { USB_DEVICE(FTDI_VID
, FTDI_ATIK_ATK16HRC_PID
) },
727 { USB_DEVICE(FTDI_VID
, FTDI_ATIK_ATK16IC_PID
) },
728 { USB_DEVICE(KOBIL_VID
, KOBIL_CONV_B1_PID
) },
729 { USB_DEVICE(KOBIL_VID
, KOBIL_CONV_KAAN_PID
) },
730 { USB_DEVICE(POSIFLEX_VID
, POSIFLEX_PP7000_PID
) },
731 { USB_DEVICE(FTDI_VID
, FTDI_TTUSB_PID
) },
732 { USB_DEVICE(FTDI_VID
, FTDI_ECLO_COM_1WIRE_PID
) },
733 { USB_DEVICE(FTDI_VID
, FTDI_WESTREX_MODEL_777_PID
) },
734 { USB_DEVICE(FTDI_VID
, FTDI_WESTREX_MODEL_8900F_PID
) },
735 { USB_DEVICE(FTDI_VID
, FTDI_PCDJ_DAC2_PID
) },
736 { USB_DEVICE(FTDI_VID
, FTDI_RRCIRKITS_LOCOBUFFER_PID
) },
737 { USB_DEVICE(FTDI_VID
, FTDI_ASK_RDR400_PID
) },
738 { USB_DEVICE(FTDI_VID
, FTDI_NZR_SEM_USB_PID
) },
739 { USB_DEVICE(ICOM_VID
, ICOM_ID_1_PID
) },
740 { USB_DEVICE(ICOM_VID
, ICOM_OPC_U_UC_PID
) },
741 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2C1_PID
) },
742 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2C2_PID
) },
743 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2D_PID
) },
744 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2VT_PID
) },
745 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2VR_PID
) },
746 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP4KVT_PID
) },
747 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP4KVR_PID
) },
748 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2KVT_PID
) },
749 { USB_DEVICE(ICOM_VID
, ICOM_ID_RP2KVR_PID
) },
750 { USB_DEVICE(FTDI_VID
, FTDI_ACG_HFDUAL_PID
) },
751 { USB_DEVICE(FTDI_VID
, FTDI_YEI_SERVOCENTER31_PID
) },
752 { USB_DEVICE(FTDI_VID
, FTDI_THORLABS_PID
) },
753 { USB_DEVICE(TESTO_VID
, TESTO_1_PID
) },
754 { USB_DEVICE(TESTO_VID
, TESTO_3_PID
) },
755 { USB_DEVICE(FTDI_VID
, FTDI_GAMMA_SCOUT_PID
) },
756 { USB_DEVICE(FTDI_VID
, FTDI_TACTRIX_OPENPORT_13M_PID
) },
757 { USB_DEVICE(FTDI_VID
, FTDI_TACTRIX_OPENPORT_13S_PID
) },
758 { USB_DEVICE(FTDI_VID
, FTDI_TACTRIX_OPENPORT_13U_PID
) },
759 { USB_DEVICE(ELEKTOR_VID
, ELEKTOR_FT323R_PID
) },
760 { USB_DEVICE(FTDI_VID
, FTDI_NDI_HUC_PID
),
761 .driver_info
= (kernel_ulong_t
)&ftdi_NDI_device_quirk
},
762 { USB_DEVICE(FTDI_VID
, FTDI_NDI_SPECTRA_SCU_PID
),
763 .driver_info
= (kernel_ulong_t
)&ftdi_NDI_device_quirk
},
764 { USB_DEVICE(FTDI_VID
, FTDI_NDI_FUTURE_2_PID
),
765 .driver_info
= (kernel_ulong_t
)&ftdi_NDI_device_quirk
},
766 { USB_DEVICE(FTDI_VID
, FTDI_NDI_FUTURE_3_PID
),
767 .driver_info
= (kernel_ulong_t
)&ftdi_NDI_device_quirk
},
768 { USB_DEVICE(FTDI_VID
, FTDI_NDI_AURORA_SCU_PID
),
769 .driver_info
= (kernel_ulong_t
)&ftdi_NDI_device_quirk
},
770 { USB_DEVICE(TELLDUS_VID
, TELLDUS_TELLSTICK_PID
) },
771 { USB_DEVICE(NOVITUS_VID
, NOVITUS_BONO_E_PID
) },
772 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_S03_PID
) },
773 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_59_PID
) },
774 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_57A_PID
) },
775 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_57B_PID
) },
776 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_29A_PID
) },
777 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_29B_PID
) },
778 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_29F_PID
) },
779 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_62B_PID
) },
780 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_S01_PID
) },
781 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_63_PID
) },
782 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_29C_PID
) },
783 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_81B_PID
) },
784 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_82B_PID
) },
785 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_K5D_PID
) },
786 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_K4Y_PID
) },
787 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_K5G_PID
) },
788 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_S05_PID
) },
789 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_60_PID
) },
790 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_61_PID
) },
791 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_62_PID
) },
792 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_63B_PID
) },
793 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_64_PID
) },
794 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_65_PID
) },
795 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_92_PID
) },
796 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_92D_PID
) },
797 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_W5R_PID
) },
798 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_A5R_PID
) },
799 { USB_DEVICE(RTSYSTEMS_VID
, RTSYSTEMS_USB_PW1_PID
) },
800 { USB_DEVICE(FTDI_VID
, FTDI_MAXSTREAM_PID
) },
801 { USB_DEVICE(FTDI_VID
, FTDI_PHI_FISCO_PID
) },
802 { USB_DEVICE(TML_VID
, TML_USB_SERIAL_PID
) },
803 { USB_DEVICE(FTDI_VID
, FTDI_ELSTER_UNICOM_PID
) },
804 { USB_DEVICE(FTDI_VID
, FTDI_PROPOX_JTAGCABLEII_PID
) },
805 { USB_DEVICE(FTDI_VID
, FTDI_PROPOX_ISPCABLEIII_PID
) },
806 { USB_DEVICE(FTDI_VID
, CYBER_CORTEX_AV_PID
),
807 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
808 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID
, OLIMEX_ARM_USB_OCD_PID
, 1) },
809 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID
, OLIMEX_ARM_USB_OCD_H_PID
, 1) },
810 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID
, OLIMEX_ARM_USB_TINY_PID
, 1) },
811 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID
, OLIMEX_ARM_USB_TINY_H_PID
, 1) },
812 { USB_DEVICE(FIC_VID
, FIC_NEO1973_DEBUG_PID
),
813 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
814 { USB_DEVICE(FTDI_VID
, FTDI_OOCDLINK_PID
),
815 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
816 { USB_DEVICE(FTDI_VID
, LMI_LM3S_DEVEL_BOARD_PID
),
817 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
818 { USB_DEVICE(FTDI_VID
, LMI_LM3S_EVAL_BOARD_PID
),
819 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
820 { USB_DEVICE(FTDI_VID
, LMI_LM3S_ICDI_BOARD_PID
),
821 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
822 { USB_DEVICE(FTDI_VID
, FTDI_TURTELIZER_PID
),
823 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
824 { USB_DEVICE(RATOC_VENDOR_ID
, RATOC_PRODUCT_ID_USB60F
) },
825 { USB_DEVICE(RATOC_VENDOR_ID
, RATOC_PRODUCT_ID_SCU18
) },
826 { USB_DEVICE(FTDI_VID
, FTDI_REU_TINY_PID
) },
828 /* Papouch devices based on FTDI chip */
829 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB485_PID
) },
830 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_AP485_PID
) },
831 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB422_PID
) },
832 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB485_2_PID
) },
833 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_AP485_2_PID
) },
834 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB422_2_PID
) },
835 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB485S_PID
) },
836 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB485C_PID
) },
837 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_LEC_PID
) },
838 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SB232_PID
) },
839 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_TMU_PID
) },
840 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_IRAMP_PID
) },
841 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_DRAK5_PID
) },
842 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO8x8_PID
) },
843 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO4x4_PID
) },
844 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO2x2_PID
) },
845 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO10x1_PID
) },
846 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO30x3_PID
) },
847 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO60x3_PID
) },
848 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO2x16_PID
) },
849 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_QUIDO3x32_PID
) },
850 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_DRAK6_PID
) },
851 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_UPSUSB_PID
) },
852 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_MU_PID
) },
853 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_SIMUKEY_PID
) },
854 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_AD4USB_PID
) },
855 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_GMUX_PID
) },
856 { USB_DEVICE(PAPOUCH_VID
, PAPOUCH_GMSR_PID
) },
858 { USB_DEVICE(FTDI_VID
, FTDI_DOMINTELL_DGQG_PID
) },
859 { USB_DEVICE(FTDI_VID
, FTDI_DOMINTELL_DUSB_PID
) },
860 { USB_DEVICE(ALTI2_VID
, ALTI2_N3_PID
) },
861 { USB_DEVICE(FTDI_VID
, DIEBOLD_BCS_SE923_PID
) },
862 { USB_DEVICE(ATMEL_VID
, STK541_PID
) },
863 { USB_DEVICE(DE_VID
, STB_PID
) },
864 { USB_DEVICE(DE_VID
, WHT_PID
) },
865 { USB_DEVICE(ADI_VID
, ADI_GNICE_PID
),
866 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
867 { USB_DEVICE(ADI_VID
, ADI_GNICEPLUS_PID
),
868 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
869 { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID
, MICROCHIP_USB_BOARD_PID
,
870 USB_CLASS_VENDOR_SPEC
,
871 USB_SUBCLASS_VENDOR_SPEC
, 0x00) },
872 { USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID
, MICROSEMI_ARROW_SF2PLUS_BOARD_PID
, 2) },
873 { USB_DEVICE(JETI_VID
, JETI_SPC1201_PID
) },
874 { USB_DEVICE(MARVELL_VID
, MARVELL_SHEEVAPLUG_PID
),
875 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
876 { USB_DEVICE(LARSENBRUSGAARD_VID
, LB_ALTITRACK_PID
) },
877 { USB_DEVICE(GN_OTOMETRICS_VID
, AURICAL_USB_PID
) },
878 { USB_DEVICE(FTDI_VID
, PI_C865_PID
) },
879 { USB_DEVICE(FTDI_VID
, PI_C857_PID
) },
880 { USB_DEVICE(PI_VID
, PI_C866_PID
) },
881 { USB_DEVICE(PI_VID
, PI_C663_PID
) },
882 { USB_DEVICE(PI_VID
, PI_C725_PID
) },
883 { USB_DEVICE(PI_VID
, PI_E517_PID
) },
884 { USB_DEVICE(PI_VID
, PI_C863_PID
) },
885 { USB_DEVICE(PI_VID
, PI_E861_PID
) },
886 { USB_DEVICE(PI_VID
, PI_C867_PID
) },
887 { USB_DEVICE(PI_VID
, PI_E609_PID
) },
888 { USB_DEVICE(PI_VID
, PI_E709_PID
) },
889 { USB_DEVICE(PI_VID
, PI_100F_PID
) },
890 { USB_DEVICE(PI_VID
, PI_1011_PID
) },
891 { USB_DEVICE(PI_VID
, PI_1012_PID
) },
892 { USB_DEVICE(PI_VID
, PI_1013_PID
) },
893 { USB_DEVICE(PI_VID
, PI_1014_PID
) },
894 { USB_DEVICE(PI_VID
, PI_1015_PID
) },
895 { USB_DEVICE(PI_VID
, PI_1016_PID
) },
896 { USB_DEVICE(KONDO_VID
, KONDO_USB_SERIAL_PID
) },
897 { USB_DEVICE(BAYER_VID
, BAYER_CONTOUR_CABLE_PID
) },
898 { USB_DEVICE(FTDI_VID
, MARVELL_OPENRD_PID
),
899 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
900 { USB_DEVICE(FTDI_VID
, TI_XDS100V2_PID
),
901 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
902 { USB_DEVICE(FTDI_VID
, HAMEG_HO820_PID
) },
903 { USB_DEVICE(FTDI_VID
, HAMEG_HO720_PID
) },
904 { USB_DEVICE(FTDI_VID
, HAMEG_HO730_PID
) },
905 { USB_DEVICE(FTDI_VID
, HAMEG_HO870_PID
) },
906 { USB_DEVICE(FTDI_VID
, MJSG_GENERIC_PID
) },
907 { USB_DEVICE(FTDI_VID
, MJSG_SR_RADIO_PID
) },
908 { USB_DEVICE(FTDI_VID
, MJSG_HD_RADIO_PID
) },
909 { USB_DEVICE(FTDI_VID
, MJSG_XM_RADIO_PID
) },
910 { USB_DEVICE(FTDI_VID
, XVERVE_SIGNALYZER_ST_PID
),
911 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
912 { USB_DEVICE(FTDI_VID
, XVERVE_SIGNALYZER_SLITE_PID
),
913 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
914 { USB_DEVICE(FTDI_VID
, XVERVE_SIGNALYZER_SH2_PID
),
915 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
916 { USB_DEVICE(FTDI_VID
, XVERVE_SIGNALYZER_SH4_PID
),
917 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
918 { USB_DEVICE(FTDI_VID
, SEGWAY_RMP200_PID
) },
919 { USB_DEVICE(FTDI_VID
, ACCESIO_COM4SM_PID
) },
920 { USB_DEVICE(IONICS_VID
, IONICS_PLUGCOMPUTER_PID
),
921 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
922 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_24_MASTER_WING_PID
) },
923 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_PC_WING_PID
) },
924 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_USB_DMX_PID
) },
925 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_MIDI_TIMECODE_PID
) },
926 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_MINI_WING_PID
) },
927 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_MAXI_WING_PID
) },
928 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_MEDIA_WING_PID
) },
929 { USB_DEVICE(FTDI_VID
, FTDI_CHAMSYS_WING_PID
) },
930 { USB_DEVICE(FTDI_VID
, FTDI_SCIENCESCOPE_LOGBOOKML_PID
) },
931 { USB_DEVICE(FTDI_VID
, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID
) },
932 { USB_DEVICE(FTDI_VID
, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID
) },
933 { USB_DEVICE(FTDI_VID
, FTDI_CINTERION_MC55I_PID
) },
934 { USB_DEVICE(FTDI_VID
, FTDI_DOTEC_PID
) },
935 { USB_DEVICE(QIHARDWARE_VID
, MILKYMISTONE_JTAGSERIAL_PID
),
936 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
937 { USB_DEVICE(ST_VID
, ST_STMCLT_2232_PID
),
938 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
939 { USB_DEVICE(ST_VID
, ST_STMCLT_4232_PID
),
940 .driver_info
= (kernel_ulong_t
)&ftdi_stmclite_quirk
},
941 { USB_DEVICE(FTDI_VID
, FTDI_RF_R106
) },
942 { USB_DEVICE(FTDI_VID
, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID
),
943 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
944 { USB_DEVICE(FTDI_VID
, FTDI_LUMEL_PD12_PID
) },
945 /* Crucible Devices */
946 { USB_DEVICE(FTDI_VID
, FTDI_CT_COMET_PID
) },
947 { USB_DEVICE(FTDI_VID
, FTDI_Z3X_PID
) },
949 { USB_DEVICE(FTDI_VID
, FTDI_CRESSI_PID
) },
950 /* Brainboxes Devices */
951 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_VX_001_PID
) },
952 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_VX_012_PID
) },
953 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_VX_023_PID
) },
954 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_VX_034_PID
) },
955 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_101_PID
) },
956 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_1_PID
) },
957 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_2_PID
) },
958 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_3_PID
) },
959 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_4_PID
) },
960 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_5_PID
) },
961 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_6_PID
) },
962 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_7_PID
) },
963 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_160_8_PID
) },
964 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_257_PID
) },
965 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_279_1_PID
) },
966 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_279_2_PID
) },
967 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_279_3_PID
) },
968 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_279_4_PID
) },
969 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_313_PID
) },
970 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_324_PID
) },
971 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_346_1_PID
) },
972 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_346_2_PID
) },
973 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_357_PID
) },
974 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_606_1_PID
) },
975 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_606_2_PID
) },
976 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_606_3_PID
) },
977 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_701_1_PID
) },
978 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_701_2_PID
) },
979 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_842_1_PID
) },
980 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_842_2_PID
) },
981 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_842_3_PID
) },
982 { USB_DEVICE(BRAINBOXES_VID
, BRAINBOXES_US_842_4_PID
) },
984 { USB_DEVICE(FTDI_VID
, FTDI_EKEY_CONV_USB_PID
) },
985 /* Infineon Devices */
986 { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID
, INFINEON_TRIBOARD_TC1798_PID
, 1) },
987 { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID
, INFINEON_TRIBOARD_TC2X7_PID
, 1) },
988 /* GE Healthcare devices */
989 { USB_DEVICE(GE_HEALTHCARE_VID
, GE_HEALTHCARE_NEMO_TRACKER_PID
) },
990 /* Active Research (Actisense) devices */
991 { USB_DEVICE(FTDI_VID
, ACTISENSE_NDC_PID
) },
992 { USB_DEVICE(FTDI_VID
, ACTISENSE_USG_PID
) },
993 { USB_DEVICE(FTDI_VID
, ACTISENSE_NGT_PID
) },
994 { USB_DEVICE(FTDI_VID
, ACTISENSE_NGW_PID
) },
995 { USB_DEVICE(FTDI_VID
, ACTISENSE_D9AC_PID
) },
996 { USB_DEVICE(FTDI_VID
, ACTISENSE_D9AD_PID
) },
997 { USB_DEVICE(FTDI_VID
, ACTISENSE_D9AE_PID
) },
998 { USB_DEVICE(FTDI_VID
, ACTISENSE_D9AF_PID
) },
999 { USB_DEVICE(FTDI_VID
, CHETCO_SEAGAUGE_PID
) },
1000 { USB_DEVICE(FTDI_VID
, CHETCO_SEASWITCH_PID
) },
1001 { USB_DEVICE(FTDI_VID
, CHETCO_SEASMART_NMEA2000_PID
) },
1002 { USB_DEVICE(FTDI_VID
, CHETCO_SEASMART_ETHERNET_PID
) },
1003 { USB_DEVICE(FTDI_VID
, CHETCO_SEASMART_WIFI_PID
) },
1004 { USB_DEVICE(FTDI_VID
, CHETCO_SEASMART_DISPLAY_PID
) },
1005 { USB_DEVICE(FTDI_VID
, CHETCO_SEASMART_LITE_PID
) },
1006 { USB_DEVICE(FTDI_VID
, CHETCO_SEASMART_ANALOG_PID
) },
1007 /* ICP DAS I-756xU devices */
1008 { USB_DEVICE(ICPDAS_VID
, ICPDAS_I7560U_PID
) },
1009 { USB_DEVICE(ICPDAS_VID
, ICPDAS_I7561U_PID
) },
1010 { USB_DEVICE(ICPDAS_VID
, ICPDAS_I7563U_PID
) },
1011 { USB_DEVICE(WICED_VID
, WICED_USB20706V2_PID
) },
1012 { USB_DEVICE(TI_VID
, TI_CC3200_LAUNCHPAD_PID
),
1013 .driver_info
= (kernel_ulong_t
)&ftdi_jtag_quirk
},
1014 { USB_DEVICE(CYPRESS_VID
, CYPRESS_WICED_BT_USB_PID
) },
1015 { USB_DEVICE(CYPRESS_VID
, CYPRESS_WICED_WL_USB_PID
) },
1016 { USB_DEVICE(AIRBUS_DS_VID
, AIRBUS_DS_P8GR
) },
1017 { } /* Terminating entry */
1020 MODULE_DEVICE_TABLE(usb
, id_table_combined
);
1022 static const char *ftdi_chip_name
[] = {
1023 [SIO
] = "SIO", /* the serial part of FT8U100AX */
1024 [FT8U232AM
] = "FT8U232AM",
1025 [FT232BM
] = "FT232BM",
1026 [FT2232C
] = "FT2232C",
1027 [FT232RL
] = "FT232RL",
1028 [FT2232H
] = "FT2232H",
1029 [FT4232H
] = "FT4232H",
1030 [FT232H
] = "FT232H",
1035 /* Used for TIOCMIWAIT */
1036 #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
1037 #define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
1038 /* End TIOCMIWAIT */
1040 /* function prototypes for a FTDI serial converter */
1041 static int ftdi_sio_probe(struct usb_serial
*serial
,
1042 const struct usb_device_id
*id
);
1043 static int ftdi_sio_port_probe(struct usb_serial_port
*port
);
1044 static int ftdi_sio_port_remove(struct usb_serial_port
*port
);
1045 static int ftdi_open(struct tty_struct
*tty
, struct usb_serial_port
*port
);
1046 static void ftdi_dtr_rts(struct usb_serial_port
*port
, int on
);
1047 static void ftdi_process_read_urb(struct urb
*urb
);
1048 static int ftdi_prepare_write_buffer(struct usb_serial_port
*port
,
1049 void *dest
, size_t size
);
1050 static void ftdi_set_termios(struct tty_struct
*tty
,
1051 struct usb_serial_port
*port
, struct ktermios
*old
);
1052 static int ftdi_tiocmget(struct tty_struct
*tty
);
1053 static int ftdi_tiocmset(struct tty_struct
*tty
,
1054 unsigned int set
, unsigned int clear
);
1055 static int ftdi_ioctl(struct tty_struct
*tty
,
1056 unsigned int cmd
, unsigned long arg
);
1057 static void ftdi_break_ctl(struct tty_struct
*tty
, int break_state
);
1058 static bool ftdi_tx_empty(struct usb_serial_port
*port
);
1059 static int ftdi_get_modem_status(struct usb_serial_port
*port
,
1060 unsigned char status
[2]);
1062 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud
, int base
);
1063 static unsigned short int ftdi_232am_baud_to_divisor(int baud
);
1064 static __u32
ftdi_232bm_baud_base_to_divisor(int baud
, int base
);
1065 static __u32
ftdi_232bm_baud_to_divisor(int baud
);
1066 static __u32
ftdi_2232h_baud_base_to_divisor(int baud
, int base
);
1067 static __u32
ftdi_2232h_baud_to_divisor(int baud
);
1069 static struct usb_serial_driver ftdi_sio_device
= {
1071 .owner
= THIS_MODULE
,
1074 .description
= "FTDI USB Serial Device",
1075 .id_table
= id_table_combined
,
1077 .bulk_in_size
= 512,
1078 .bulk_out_size
= 256,
1079 .probe
= ftdi_sio_probe
,
1080 .port_probe
= ftdi_sio_port_probe
,
1081 .port_remove
= ftdi_sio_port_remove
,
1083 .dtr_rts
= ftdi_dtr_rts
,
1084 .throttle
= usb_serial_generic_throttle
,
1085 .unthrottle
= usb_serial_generic_unthrottle
,
1086 .process_read_urb
= ftdi_process_read_urb
,
1087 .prepare_write_buffer
= ftdi_prepare_write_buffer
,
1088 .tiocmget
= ftdi_tiocmget
,
1089 .tiocmset
= ftdi_tiocmset
,
1090 .tiocmiwait
= usb_serial_generic_tiocmiwait
,
1091 .get_icount
= usb_serial_generic_get_icount
,
1092 .ioctl
= ftdi_ioctl
,
1093 .set_termios
= ftdi_set_termios
,
1094 .break_ctl
= ftdi_break_ctl
,
1095 .tx_empty
= ftdi_tx_empty
,
1098 static struct usb_serial_driver
* const serial_drivers
[] = {
1099 &ftdi_sio_device
, NULL
1103 #define WDR_TIMEOUT 5000 /* default urb timeout */
1104 #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
1107 * ***************************************************************************
1109 * ***************************************************************************
1112 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud
, int base
)
1114 unsigned short int divisor
;
1115 /* divisor shifted 3 bits to the left */
1116 int divisor3
= base
/ 2 / baud
;
1117 if ((divisor3
& 0x7) == 7)
1118 divisor3
++; /* round x.7/8 up to x+1 */
1119 divisor
= divisor3
>> 3;
1123 else if (divisor3
>= 4)
1125 else if (divisor3
!= 0)
1127 else if (divisor
== 1)
1128 divisor
= 0; /* special case for maximum baud rate */
1132 static unsigned short int ftdi_232am_baud_to_divisor(int baud
)
1134 return ftdi_232am_baud_base_to_divisor(baud
, 48000000);
1137 static __u32
ftdi_232bm_baud_base_to_divisor(int baud
, int base
)
1139 static const unsigned char divfrac
[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
1141 /* divisor shifted 3 bits to the left */
1142 int divisor3
= base
/ 2 / baud
;
1143 divisor
= divisor3
>> 3;
1144 divisor
|= (__u32
)divfrac
[divisor3
& 0x7] << 14;
1145 /* Deal with special cases for highest baud rates. */
1148 else if (divisor
== 0x4001)
1153 static __u32
ftdi_232bm_baud_to_divisor(int baud
)
1155 return ftdi_232bm_baud_base_to_divisor(baud
, 48000000);
1158 static __u32
ftdi_2232h_baud_base_to_divisor(int baud
, int base
)
1160 static const unsigned char divfrac
[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
1164 /* hi-speed baud rate is 10-bit sampling instead of 16-bit */
1165 divisor3
= base
* 8 / (baud
* 10);
1167 divisor
= divisor3
>> 3;
1168 divisor
|= (__u32
)divfrac
[divisor3
& 0x7] << 14;
1169 /* Deal with special cases for highest baud rates. */
1172 else if (divisor
== 0x4001)
1175 * Set this bit to turn off a divide by 2.5 on baud rate generator
1176 * This enables baud rates up to 12Mbaud but cannot reach below 1200
1177 * baud with this bit set
1179 divisor
|= 0x00020000;
1183 static __u32
ftdi_2232h_baud_to_divisor(int baud
)
1185 return ftdi_2232h_baud_base_to_divisor(baud
, 120000000);
1188 #define set_mctrl(port, set) update_mctrl((port), (set), 0)
1189 #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
1191 static int update_mctrl(struct usb_serial_port
*port
, unsigned int set
,
1194 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1195 struct device
*dev
= &port
->dev
;
1199 if (((set
| clear
) & (TIOCM_DTR
| TIOCM_RTS
)) == 0) {
1200 dev_dbg(dev
, "%s - DTR|RTS not being set|cleared\n", __func__
);
1201 return 0; /* no change */
1204 clear
&= ~set
; /* 'set' takes precedence over 'clear' */
1206 if (clear
& TIOCM_DTR
)
1207 urb_value
|= FTDI_SIO_SET_DTR_LOW
;
1208 if (clear
& TIOCM_RTS
)
1209 urb_value
|= FTDI_SIO_SET_RTS_LOW
;
1210 if (set
& TIOCM_DTR
)
1211 urb_value
|= FTDI_SIO_SET_DTR_HIGH
;
1212 if (set
& TIOCM_RTS
)
1213 urb_value
|= FTDI_SIO_SET_RTS_HIGH
;
1214 rv
= usb_control_msg(port
->serial
->dev
,
1215 usb_sndctrlpipe(port
->serial
->dev
, 0),
1216 FTDI_SIO_SET_MODEM_CTRL_REQUEST
,
1217 FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE
,
1218 urb_value
, priv
->interface
,
1219 NULL
, 0, WDR_TIMEOUT
);
1221 dev_dbg(dev
, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n",
1223 (set
& TIOCM_DTR
) ? "HIGH" : (clear
& TIOCM_DTR
) ? "LOW" : "unchanged",
1224 (set
& TIOCM_RTS
) ? "HIGH" : (clear
& TIOCM_RTS
) ? "LOW" : "unchanged");
1225 rv
= usb_translate_errors(rv
);
1227 dev_dbg(dev
, "%s - DTR %s, RTS %s\n", __func__
,
1228 (set
& TIOCM_DTR
) ? "HIGH" : (clear
& TIOCM_DTR
) ? "LOW" : "unchanged",
1229 (set
& TIOCM_RTS
) ? "HIGH" : (clear
& TIOCM_RTS
) ? "LOW" : "unchanged");
1230 /* FIXME: locking on last_dtr_rts */
1231 priv
->last_dtr_rts
= (priv
->last_dtr_rts
& ~clear
) | set
;
1237 static __u32
get_ftdi_divisor(struct tty_struct
*tty
,
1238 struct usb_serial_port
*port
)
1240 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1241 struct device
*dev
= &port
->dev
;
1242 __u32 div_value
= 0;
1246 baud
= tty_get_baud_rate(tty
);
1247 dev_dbg(dev
, "%s - tty_get_baud_rate reports speed %d\n", __func__
, baud
);
1250 * Observe deprecated async-compatible custom_divisor hack, update
1251 * baudrate if needed.
1253 if (baud
== 38400 &&
1254 ((priv
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_CUST
) &&
1255 (priv
->custom_divisor
)) {
1256 baud
= priv
->baud_base
/ priv
->custom_divisor
;
1257 dev_dbg(dev
, "%s - custom divisor %d sets baud rate to %d\n",
1258 __func__
, priv
->custom_divisor
, baud
);
1263 switch (priv
->chip_type
) {
1264 case SIO
: /* SIO chip */
1266 case 300: div_value
= ftdi_sio_b300
; break;
1267 case 600: div_value
= ftdi_sio_b600
; break;
1268 case 1200: div_value
= ftdi_sio_b1200
; break;
1269 case 2400: div_value
= ftdi_sio_b2400
; break;
1270 case 4800: div_value
= ftdi_sio_b4800
; break;
1271 case 9600: div_value
= ftdi_sio_b9600
; break;
1272 case 19200: div_value
= ftdi_sio_b19200
; break;
1273 case 38400: div_value
= ftdi_sio_b38400
; break;
1274 case 57600: div_value
= ftdi_sio_b57600
; break;
1275 case 115200: div_value
= ftdi_sio_b115200
; break;
1277 if (div_value
== 0) {
1278 dev_dbg(dev
, "%s - Baudrate (%d) requested is not supported\n",
1280 div_value
= ftdi_sio_b9600
;
1285 case FT8U232AM
: /* 8U232AM chip */
1286 if (baud
<= 3000000) {
1287 div_value
= ftdi_232am_baud_to_divisor(baud
);
1289 dev_dbg(dev
, "%s - Baud rate too high!\n", __func__
);
1291 div_value
= ftdi_232am_baud_to_divisor(9600);
1295 case FT232BM
: /* FT232BM chip */
1296 case FT2232C
: /* FT2232C chip */
1297 case FT232RL
: /* FT232RL chip */
1298 case FTX
: /* FT-X series */
1299 if (baud
<= 3000000) {
1300 __u16 product_id
= le16_to_cpu(
1301 port
->serial
->dev
->descriptor
.idProduct
);
1302 if (((product_id
== FTDI_NDI_HUC_PID
) ||
1303 (product_id
== FTDI_NDI_SPECTRA_SCU_PID
) ||
1304 (product_id
== FTDI_NDI_FUTURE_2_PID
) ||
1305 (product_id
== FTDI_NDI_FUTURE_3_PID
) ||
1306 (product_id
== FTDI_NDI_AURORA_SCU_PID
)) &&
1310 div_value
= ftdi_232bm_baud_to_divisor(baud
);
1312 dev_dbg(dev
, "%s - Baud rate too high!\n", __func__
);
1313 div_value
= ftdi_232bm_baud_to_divisor(9600);
1318 case FT2232H
: /* FT2232H chip */
1319 case FT4232H
: /* FT4232H chip */
1320 case FT232H
: /* FT232H chip */
1321 if ((baud
<= 12000000) && (baud
>= 1200)) {
1322 div_value
= ftdi_2232h_baud_to_divisor(baud
);
1323 } else if (baud
< 1200) {
1324 div_value
= ftdi_232bm_baud_to_divisor(baud
);
1326 dev_dbg(dev
, "%s - Baud rate too high!\n", __func__
);
1327 div_value
= ftdi_232bm_baud_to_divisor(9600);
1332 } /* priv->chip_type */
1335 dev_dbg(dev
, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n",
1336 __func__
, baud
, (unsigned long)div_value
,
1337 ftdi_chip_name
[priv
->chip_type
]);
1340 tty_encode_baud_rate(tty
, baud
, baud
);
1344 static int change_speed(struct tty_struct
*tty
, struct usb_serial_port
*port
)
1346 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1349 __u32 urb_index_value
;
1352 urb_index_value
= get_ftdi_divisor(tty
, port
);
1353 urb_value
= (__u16
)urb_index_value
;
1354 urb_index
= (__u16
)(urb_index_value
>> 16);
1355 if ((priv
->chip_type
== FT2232C
) || (priv
->chip_type
== FT2232H
) ||
1356 (priv
->chip_type
== FT4232H
) || (priv
->chip_type
== FT232H
)) {
1357 /* Probably the BM type needs the MSB of the encoded fractional
1358 * divider also moved like for the chips above. Any infos? */
1359 urb_index
= (__u16
)((urb_index
<< 8) | priv
->interface
);
1362 rv
= usb_control_msg(port
->serial
->dev
,
1363 usb_sndctrlpipe(port
->serial
->dev
, 0),
1364 FTDI_SIO_SET_BAUDRATE_REQUEST
,
1365 FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE
,
1366 urb_value
, urb_index
,
1367 NULL
, 0, WDR_SHORT_TIMEOUT
);
1371 static int write_latency_timer(struct usb_serial_port
*port
)
1373 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1374 struct usb_device
*udev
= port
->serial
->dev
;
1376 int l
= priv
->latency
;
1378 if (priv
->chip_type
== SIO
|| priv
->chip_type
== FT8U232AM
)
1381 if (priv
->flags
& ASYNC_LOW_LATENCY
)
1384 dev_dbg(&port
->dev
, "%s: setting latency timer = %i\n", __func__
, l
);
1386 rv
= usb_control_msg(udev
,
1387 usb_sndctrlpipe(udev
, 0),
1388 FTDI_SIO_SET_LATENCY_TIMER_REQUEST
,
1389 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE
,
1391 NULL
, 0, WDR_TIMEOUT
);
1393 dev_err(&port
->dev
, "Unable to write latency timer: %i\n", rv
);
1397 static int _read_latency_timer(struct usb_serial_port
*port
)
1399 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1400 struct usb_device
*udev
= port
->serial
->dev
;
1404 buf
= kmalloc(1, GFP_KERNEL
);
1408 rv
= usb_control_msg(udev
,
1409 usb_rcvctrlpipe(udev
, 0),
1410 FTDI_SIO_GET_LATENCY_TIMER_REQUEST
,
1411 FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE
,
1413 buf
, 1, WDR_TIMEOUT
);
1426 static int read_latency_timer(struct usb_serial_port
*port
)
1428 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1431 if (priv
->chip_type
== SIO
|| priv
->chip_type
== FT8U232AM
)
1434 rv
= _read_latency_timer(port
);
1436 dev_err(&port
->dev
, "Unable to read latency timer: %i\n", rv
);
1445 static int get_serial_info(struct usb_serial_port
*port
,
1446 struct serial_struct __user
*retinfo
)
1448 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1449 struct serial_struct tmp
;
1451 memset(&tmp
, 0, sizeof(tmp
));
1452 tmp
.flags
= priv
->flags
;
1453 tmp
.baud_base
= priv
->baud_base
;
1454 tmp
.custom_divisor
= priv
->custom_divisor
;
1455 if (copy_to_user(retinfo
, &tmp
, sizeof(*retinfo
)))
1460 static int set_serial_info(struct tty_struct
*tty
,
1461 struct usb_serial_port
*port
, struct serial_struct __user
*newinfo
)
1463 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1464 struct serial_struct new_serial
;
1465 struct ftdi_private old_priv
;
1467 if (copy_from_user(&new_serial
, newinfo
, sizeof(new_serial
)))
1470 mutex_lock(&priv
->cfg_lock
);
1473 /* Do error checking and permission checking */
1475 if (!capable(CAP_SYS_ADMIN
)) {
1476 if ((new_serial
.flags
^ priv
->flags
) & ~ASYNC_USR_MASK
) {
1477 mutex_unlock(&priv
->cfg_lock
);
1480 priv
->flags
= ((priv
->flags
& ~ASYNC_USR_MASK
) |
1481 (new_serial
.flags
& ASYNC_USR_MASK
));
1482 priv
->custom_divisor
= new_serial
.custom_divisor
;
1483 goto check_and_exit
;
1486 if (new_serial
.baud_base
!= priv
->baud_base
) {
1487 mutex_unlock(&priv
->cfg_lock
);
1491 /* Make the changes - these are privileged changes! */
1493 priv
->flags
= ((priv
->flags
& ~ASYNC_FLAGS
) |
1494 (new_serial
.flags
& ASYNC_FLAGS
));
1495 priv
->custom_divisor
= new_serial
.custom_divisor
;
1498 write_latency_timer(port
);
1500 if ((priv
->flags
^ old_priv
.flags
) & ASYNC_SPD_MASK
||
1501 ((priv
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_CUST
&&
1502 priv
->custom_divisor
!= old_priv
.custom_divisor
)) {
1504 /* warn about deprecation unless clearing */
1505 if (priv
->flags
& ASYNC_SPD_MASK
)
1506 dev_warn_ratelimited(&port
->dev
, "use of SPD flags is deprecated\n");
1508 change_speed(tty
, port
);
1509 mutex_unlock(&priv
->cfg_lock
);
1512 mutex_unlock(&priv
->cfg_lock
);
1516 static int get_lsr_info(struct usb_serial_port
*port
,
1517 unsigned int __user
*retinfo
)
1519 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1520 unsigned int result
= 0;
1522 if (priv
->transmit_empty
)
1523 result
= TIOCSER_TEMT
;
1525 if (copy_to_user(retinfo
, &result
, sizeof(unsigned int)))
1531 /* Determine type of FTDI chip based on USB config and descriptor. */
1532 static void ftdi_determine_type(struct usb_serial_port
*port
)
1534 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1535 struct usb_serial
*serial
= port
->serial
;
1536 struct usb_device
*udev
= serial
->dev
;
1538 unsigned interfaces
;
1540 /* Assume it is not the original SIO device for now. */
1541 priv
->baud_base
= 48000000 / 2;
1543 version
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
1544 interfaces
= udev
->actconfig
->desc
.bNumInterfaces
;
1545 dev_dbg(&port
->dev
, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__
,
1546 version
, interfaces
);
1547 if (interfaces
> 1) {
1550 /* Multiple interfaces.*/
1551 if (version
== 0x0800) {
1552 priv
->chip_type
= FT4232H
;
1553 /* Hi-speed - baud clock runs at 120MHz */
1554 priv
->baud_base
= 120000000 / 2;
1555 } else if (version
== 0x0700) {
1556 priv
->chip_type
= FT2232H
;
1557 /* Hi-speed - baud clock runs at 120MHz */
1558 priv
->baud_base
= 120000000 / 2;
1560 priv
->chip_type
= FT2232C
;
1562 /* Determine interface code. */
1563 inter
= serial
->interface
->altsetting
->desc
.bInterfaceNumber
;
1565 priv
->interface
= INTERFACE_A
;
1566 } else if (inter
== 1) {
1567 priv
->interface
= INTERFACE_B
;
1568 } else if (inter
== 2) {
1569 priv
->interface
= INTERFACE_C
;
1570 } else if (inter
== 3) {
1571 priv
->interface
= INTERFACE_D
;
1573 /* BM-type devices have a bug where bcdDevice gets set
1574 * to 0x200 when iSerialNumber is 0. */
1575 if (version
< 0x500) {
1577 "%s: something fishy - bcdDevice too low for multi-interface device\n",
1580 } else if (version
< 0x200) {
1581 /* Old device. Assume it's the original SIO. */
1582 priv
->chip_type
= SIO
;
1583 priv
->baud_base
= 12000000 / 16;
1584 } else if (version
< 0x400) {
1585 /* Assume it's an FT8U232AM (or FT8U245AM) */
1586 priv
->chip_type
= FT8U232AM
;
1588 * It might be a BM type because of the iSerialNumber bug.
1589 * If iSerialNumber==0 and the latency timer is readable,
1590 * assume it is BM type.
1592 if (udev
->descriptor
.iSerialNumber
== 0 &&
1593 _read_latency_timer(port
) >= 0) {
1595 "%s: has latency timer so not an AM type\n",
1597 priv
->chip_type
= FT232BM
;
1599 } else if (version
< 0x600) {
1600 /* Assume it's an FT232BM (or FT245BM) */
1601 priv
->chip_type
= FT232BM
;
1602 } else if (version
< 0x900) {
1603 /* Assume it's an FT232RL */
1604 priv
->chip_type
= FT232RL
;
1605 } else if (version
< 0x1000) {
1606 /* Assume it's an FT232H */
1607 priv
->chip_type
= FT232H
;
1609 /* Assume it's an FT-X series device */
1610 priv
->chip_type
= FTX
;
1613 dev_info(&udev
->dev
, "Detected %s\n", ftdi_chip_name
[priv
->chip_type
]);
1618 * Determine the maximum packet size for the device. This depends on the chip
1619 * type and the USB host capabilities. The value should be obtained from the
1620 * device descriptor as the chip will use the appropriate values for the host.
1622 static void ftdi_set_max_packet_size(struct usb_serial_port
*port
)
1624 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1625 struct usb_interface
*interface
= port
->serial
->interface
;
1626 struct usb_endpoint_descriptor
*ep_desc
;
1627 unsigned num_endpoints
;
1630 num_endpoints
= interface
->cur_altsetting
->desc
.bNumEndpoints
;
1635 * NOTE: Some customers have programmed FT232R/FT245R devices
1636 * with an endpoint size of 0 - not good. In this case, we
1637 * want to override the endpoint descriptor setting and use a
1638 * value of 64 for wMaxPacketSize.
1640 for (i
= 0; i
< num_endpoints
; i
++) {
1641 ep_desc
= &interface
->cur_altsetting
->endpoint
[i
].desc
;
1642 if (!ep_desc
->wMaxPacketSize
) {
1643 ep_desc
->wMaxPacketSize
= cpu_to_le16(0x40);
1644 dev_warn(&port
->dev
, "Overriding wMaxPacketSize on endpoint %d\n",
1645 usb_endpoint_num(ep_desc
));
1649 /* Set max packet size based on last descriptor. */
1650 priv
->max_packet_size
= usb_endpoint_maxp(ep_desc
);
1655 * ***************************************************************************
1657 * ***************************************************************************
1660 static ssize_t
latency_timer_show(struct device
*dev
,
1661 struct device_attribute
*attr
, char *buf
)
1663 struct usb_serial_port
*port
= to_usb_serial_port(dev
);
1664 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1665 if (priv
->flags
& ASYNC_LOW_LATENCY
)
1666 return sprintf(buf
, "1\n");
1668 return sprintf(buf
, "%i\n", priv
->latency
);
1671 /* Write a new value of the latency timer, in units of milliseconds. */
1672 static ssize_t
latency_timer_store(struct device
*dev
,
1673 struct device_attribute
*attr
,
1674 const char *valbuf
, size_t count
)
1676 struct usb_serial_port
*port
= to_usb_serial_port(dev
);
1677 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1681 if (kstrtou8(valbuf
, 10, &v
))
1685 rv
= write_latency_timer(port
);
1690 static DEVICE_ATTR_RW(latency_timer
);
1692 /* Write an event character directly to the FTDI register. The ASCII
1693 value is in the low 8 bits, with the enable bit in the 9th bit. */
1694 static ssize_t
event_char_store(struct device
*dev
,
1695 struct device_attribute
*attr
, const char *valbuf
, size_t count
)
1697 struct usb_serial_port
*port
= to_usb_serial_port(dev
);
1698 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1699 struct usb_device
*udev
= port
->serial
->dev
;
1703 if (kstrtouint(valbuf
, 0, &v
) || v
>= 0x200)
1706 dev_dbg(&port
->dev
, "%s: setting event char = 0x%03x\n", __func__
, v
);
1708 rv
= usb_control_msg(udev
,
1709 usb_sndctrlpipe(udev
, 0),
1710 FTDI_SIO_SET_EVENT_CHAR_REQUEST
,
1711 FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE
,
1713 NULL
, 0, WDR_TIMEOUT
);
1715 dev_dbg(&port
->dev
, "Unable to write event character: %i\n", rv
);
1721 static DEVICE_ATTR_WO(event_char
);
1723 static int create_sysfs_attrs(struct usb_serial_port
*port
)
1725 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1728 /* XXX I've no idea if the original SIO supports the event_char
1729 * sysfs parameter, so I'm playing it safe. */
1730 if (priv
->chip_type
!= SIO
) {
1731 dev_dbg(&port
->dev
, "sysfs attributes for %s\n", ftdi_chip_name
[priv
->chip_type
]);
1732 retval
= device_create_file(&port
->dev
, &dev_attr_event_char
);
1734 (priv
->chip_type
== FT232BM
||
1735 priv
->chip_type
== FT2232C
||
1736 priv
->chip_type
== FT232RL
||
1737 priv
->chip_type
== FT2232H
||
1738 priv
->chip_type
== FT4232H
||
1739 priv
->chip_type
== FT232H
||
1740 priv
->chip_type
== FTX
)) {
1741 retval
= device_create_file(&port
->dev
,
1742 &dev_attr_latency_timer
);
1748 static void remove_sysfs_attrs(struct usb_serial_port
*port
)
1750 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1752 /* XXX see create_sysfs_attrs */
1753 if (priv
->chip_type
!= SIO
) {
1754 device_remove_file(&port
->dev
, &dev_attr_event_char
);
1755 if (priv
->chip_type
== FT232BM
||
1756 priv
->chip_type
== FT2232C
||
1757 priv
->chip_type
== FT232RL
||
1758 priv
->chip_type
== FT2232H
||
1759 priv
->chip_type
== FT4232H
||
1760 priv
->chip_type
== FT232H
||
1761 priv
->chip_type
== FTX
) {
1762 device_remove_file(&port
->dev
, &dev_attr_latency_timer
);
1769 * ***************************************************************************
1770 * FTDI driver specific functions
1771 * ***************************************************************************
1774 /* Probe function to check for special devices */
1775 static int ftdi_sio_probe(struct usb_serial
*serial
,
1776 const struct usb_device_id
*id
)
1778 const struct ftdi_sio_quirk
*quirk
=
1779 (struct ftdi_sio_quirk
*)id
->driver_info
;
1781 if (quirk
&& quirk
->probe
) {
1782 int ret
= quirk
->probe(serial
);
1787 usb_set_serial_data(serial
, (void *)id
->driver_info
);
1792 static int ftdi_sio_port_probe(struct usb_serial_port
*port
)
1794 struct ftdi_private
*priv
;
1795 const struct ftdi_sio_quirk
*quirk
= usb_get_serial_data(port
->serial
);
1798 priv
= kzalloc(sizeof(struct ftdi_private
), GFP_KERNEL
);
1802 mutex_init(&priv
->cfg_lock
);
1804 if (quirk
&& quirk
->port_probe
)
1805 quirk
->port_probe(priv
);
1807 usb_set_serial_port_data(port
, priv
);
1809 ftdi_determine_type(port
);
1810 ftdi_set_max_packet_size(port
);
1811 if (read_latency_timer(port
) < 0)
1813 write_latency_timer(port
);
1814 create_sysfs_attrs(port
);
1818 /* Setup for the USB-UIRT device, which requires hardwired
1819 * baudrate (38400 gets mapped to 312500) */
1820 /* Called from usbserial:serial_probe */
1821 static void ftdi_USB_UIRT_setup(struct ftdi_private
*priv
)
1823 priv
->flags
|= ASYNC_SPD_CUST
;
1824 priv
->custom_divisor
= 77;
1825 priv
->force_baud
= 38400;
1828 /* Setup for the HE-TIRA1 device, which requires hardwired
1829 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
1831 static void ftdi_HE_TIRA1_setup(struct ftdi_private
*priv
)
1833 priv
->flags
|= ASYNC_SPD_CUST
;
1834 priv
->custom_divisor
= 240;
1835 priv
->force_baud
= 38400;
1836 priv
->force_rtscts
= 1;
1840 * Module parameter to control latency timer for NDI FTDI-based USB devices.
1841 * If this value is not set in /etc/modprobe.d/ its value will be set
1844 static int ndi_latency_timer
= 1;
1846 /* Setup for the NDI FTDI-based USB devices, which requires hardwired
1847 * baudrate (19200 gets mapped to 1200000).
1849 * Called from usbserial:serial_probe.
1851 static int ftdi_NDI_device_setup(struct usb_serial
*serial
)
1853 struct usb_device
*udev
= serial
->dev
;
1854 int latency
= ndi_latency_timer
;
1861 dev_dbg(&udev
->dev
, "%s setting NDI device latency to %d\n", __func__
, latency
);
1862 dev_info(&udev
->dev
, "NDI device with a latency value of %d\n", latency
);
1864 /* FIXME: errors are not returned */
1865 usb_control_msg(udev
, usb_sndctrlpipe(udev
, 0),
1866 FTDI_SIO_SET_LATENCY_TIMER_REQUEST
,
1867 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE
,
1868 latency
, 0, NULL
, 0, WDR_TIMEOUT
);
1873 * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
1874 * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
1875 * userspace using openocd.
1877 static int ftdi_jtag_probe(struct usb_serial
*serial
)
1879 struct usb_device
*udev
= serial
->dev
;
1880 struct usb_interface
*interface
= serial
->interface
;
1882 if (interface
== udev
->actconfig
->interface
[0]) {
1883 dev_info(&udev
->dev
,
1884 "Ignoring serial port reserved for JTAG\n");
1891 static int ftdi_8u2232c_probe(struct usb_serial
*serial
)
1893 struct usb_device
*udev
= serial
->dev
;
1895 if (udev
->manufacturer
&& !strcmp(udev
->manufacturer
, "CALAO Systems"))
1896 return ftdi_jtag_probe(serial
);
1898 if (udev
->product
&&
1899 (!strcmp(udev
->product
, "BeagleBone/XDS100V2") ||
1900 !strcmp(udev
->product
, "SNAP Connect E10")))
1901 return ftdi_jtag_probe(serial
);
1907 * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
1908 * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
1909 * can be accessed from userspace.
1910 * The next two ports are enabled as UARTs by default, where port 2 is
1911 * a conventional RS-232 UART.
1913 static int ftdi_stmclite_probe(struct usb_serial
*serial
)
1915 struct usb_device
*udev
= serial
->dev
;
1916 struct usb_interface
*interface
= serial
->interface
;
1918 if (interface
== udev
->actconfig
->interface
[0] ||
1919 interface
== udev
->actconfig
->interface
[1]) {
1920 dev_info(&udev
->dev
, "Ignoring serial port reserved for JTAG\n");
1927 static int ftdi_sio_port_remove(struct usb_serial_port
*port
)
1929 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1931 remove_sysfs_attrs(port
);
1938 static int ftdi_open(struct tty_struct
*tty
, struct usb_serial_port
*port
)
1940 struct usb_device
*dev
= port
->serial
->dev
;
1941 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1943 /* No error checking for this (will get errors later anyway) */
1944 /* See ftdi_sio.h for description of what is reset */
1945 usb_control_msg(dev
, usb_sndctrlpipe(dev
, 0),
1946 FTDI_SIO_RESET_REQUEST
, FTDI_SIO_RESET_REQUEST_TYPE
,
1948 priv
->interface
, NULL
, 0, WDR_TIMEOUT
);
1950 /* Termios defaults are set by usb_serial_init. We don't change
1951 port->tty->termios - this would lose speed settings, etc.
1952 This is same behaviour as serial.c/rs_open() - Kuba */
1954 /* ftdi_set_termios will send usb control messages */
1956 ftdi_set_termios(tty
, port
, NULL
);
1958 return usb_serial_generic_open(tty
, port
);
1961 static void ftdi_dtr_rts(struct usb_serial_port
*port
, int on
)
1963 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
1965 /* Disable flow control */
1967 if (usb_control_msg(port
->serial
->dev
,
1968 usb_sndctrlpipe(port
->serial
->dev
, 0),
1969 FTDI_SIO_SET_FLOW_CTRL_REQUEST
,
1970 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE
,
1971 0, priv
->interface
, NULL
, 0,
1973 dev_err(&port
->dev
, "error from flowcontrol urb\n");
1976 /* drop RTS and DTR */
1978 set_mctrl(port
, TIOCM_DTR
| TIOCM_RTS
);
1980 clear_mctrl(port
, TIOCM_DTR
| TIOCM_RTS
);
1983 /* The SIO requires the first byte to have:
1986 * B2..7 length of message excluding byte 0
1988 * The new devices do not require this byte
1990 static int ftdi_prepare_write_buffer(struct usb_serial_port
*port
,
1991 void *dest
, size_t size
)
1993 struct ftdi_private
*priv
;
1995 unsigned long flags
;
1997 priv
= usb_get_serial_port_data(port
);
1999 if (priv
->chip_type
== SIO
) {
2000 unsigned char *buffer
= dest
;
2004 spin_lock_irqsave(&port
->lock
, flags
);
2005 for (i
= 0; i
< size
- 1; i
+= priv
->max_packet_size
) {
2006 len
= min_t(int, size
- i
, priv
->max_packet_size
) - 1;
2007 c
= kfifo_out(&port
->write_fifo
, &buffer
[i
+ 1], len
);
2010 port
->icount
.tx
+= c
;
2011 buffer
[i
] = (c
<< 2) + 1;
2014 spin_unlock_irqrestore(&port
->lock
, flags
);
2016 count
= kfifo_out_locked(&port
->write_fifo
, dest
, size
,
2018 port
->icount
.tx
+= count
;
2024 #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
2026 static int ftdi_process_packet(struct usb_serial_port
*port
,
2027 struct ftdi_private
*priv
, char *packet
, int len
)
2035 dev_dbg(&port
->dev
, "malformed packet\n");
2039 /* Compare new line status to the old one, signal if different/
2040 N.B. packet may be processed more than once, but differences
2041 are only processed once. */
2042 status
= packet
[0] & FTDI_STATUS_B0_MASK
;
2043 if (status
!= priv
->prev_status
) {
2044 char diff_status
= status
^ priv
->prev_status
;
2046 if (diff_status
& FTDI_RS0_CTS
)
2048 if (diff_status
& FTDI_RS0_DSR
)
2050 if (diff_status
& FTDI_RS0_RI
)
2052 if (diff_status
& FTDI_RS0_RLSD
) {
2053 struct tty_struct
*tty
;
2056 tty
= tty_port_tty_get(&port
->port
);
2058 usb_serial_handle_dcd_change(port
, tty
,
2059 status
& FTDI_RS0_RLSD
);
2063 wake_up_interruptible(&port
->port
.delta_msr_wait
);
2064 priv
->prev_status
= status
;
2067 /* save if the transmitter is empty or not */
2068 if (packet
[1] & FTDI_RS_TEMT
)
2069 priv
->transmit_empty
= 1;
2071 priv
->transmit_empty
= 0;
2075 return 0; /* status only */
2078 * Break and error status must only be processed for packets with
2079 * data payload to avoid over-reporting.
2082 if (packet
[1] & FTDI_RS_ERR_MASK
) {
2083 /* Break takes precedence over parity, which takes precedence
2084 * over framing errors */
2085 if (packet
[1] & FTDI_RS_BI
) {
2088 usb_serial_handle_break(port
);
2089 } else if (packet
[1] & FTDI_RS_PE
) {
2091 port
->icount
.parity
++;
2092 } else if (packet
[1] & FTDI_RS_FE
) {
2094 port
->icount
.frame
++;
2096 /* Overrun is special, not associated with a char */
2097 if (packet
[1] & FTDI_RS_OE
) {
2098 port
->icount
.overrun
++;
2099 tty_insert_flip_char(&port
->port
, 0, TTY_OVERRUN
);
2103 port
->icount
.rx
+= len
;
2106 if (port
->port
.console
&& port
->sysrq
) {
2107 for (i
= 0; i
< len
; i
++, ch
++) {
2108 if (!usb_serial_handle_sysrq_char(port
, *ch
))
2109 tty_insert_flip_char(&port
->port
, *ch
, flag
);
2112 tty_insert_flip_string_fixed_flag(&port
->port
, ch
, flag
, len
);
2118 static void ftdi_process_read_urb(struct urb
*urb
)
2120 struct usb_serial_port
*port
= urb
->context
;
2121 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
2122 char *data
= (char *)urb
->transfer_buffer
;
2127 for (i
= 0; i
< urb
->actual_length
; i
+= priv
->max_packet_size
) {
2128 len
= min_t(int, urb
->actual_length
- i
, priv
->max_packet_size
);
2129 count
+= ftdi_process_packet(port
, priv
, &data
[i
], len
);
2133 tty_flip_buffer_push(&port
->port
);
2136 static void ftdi_break_ctl(struct tty_struct
*tty
, int break_state
)
2138 struct usb_serial_port
*port
= tty
->driver_data
;
2139 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
2142 /* break_state = -1 to turn on break, and 0 to turn off break */
2143 /* see drivers/char/tty_io.c to see it used */
2144 /* last_set_data_urb_value NEVER has the break bit set in it */
2147 urb_value
= priv
->last_set_data_urb_value
| FTDI_SIO_SET_BREAK
;
2149 urb_value
= priv
->last_set_data_urb_value
;
2151 if (usb_control_msg(port
->serial
->dev
,
2152 usb_sndctrlpipe(port
->serial
->dev
, 0),
2153 FTDI_SIO_SET_DATA_REQUEST
,
2154 FTDI_SIO_SET_DATA_REQUEST_TYPE
,
2155 urb_value
, priv
->interface
,
2156 NULL
, 0, WDR_TIMEOUT
) < 0) {
2157 dev_err(&port
->dev
, "%s FAILED to enable/disable break state (state was %d)\n",
2158 __func__
, break_state
);
2161 dev_dbg(&port
->dev
, "%s break state is %d - urb is %d\n", __func__
,
2162 break_state
, urb_value
);
2166 static bool ftdi_tx_empty(struct usb_serial_port
*port
)
2168 unsigned char buf
[2];
2171 ret
= ftdi_get_modem_status(port
, buf
);
2173 if (!(buf
[1] & FTDI_RS_TEMT
))
2180 /* old_termios contains the original termios settings and tty->termios contains
2181 * the new setting to be used
2182 * WARNING: set_termios calls this with old_termios in kernel space
2184 static void ftdi_set_termios(struct tty_struct
*tty
,
2185 struct usb_serial_port
*port
, struct ktermios
*old_termios
)
2187 struct usb_device
*dev
= port
->serial
->dev
;
2188 struct device
*ddev
= &port
->dev
;
2189 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
2190 struct ktermios
*termios
= &tty
->termios
;
2191 unsigned int cflag
= termios
->c_cflag
;
2192 __u16 urb_value
; /* will hold the new flags */
2194 /* Added for xon/xoff support */
2195 unsigned int iflag
= termios
->c_iflag
;
2196 unsigned char vstop
;
2197 unsigned char vstart
;
2199 /* Force baud rate if this device requires it, unless it is set to
2201 if (priv
->force_baud
&& ((termios
->c_cflag
& CBAUD
) != B0
)) {
2202 dev_dbg(ddev
, "%s: forcing baud rate for this device\n", __func__
);
2203 tty_encode_baud_rate(tty
, priv
->force_baud
,
2207 /* Force RTS-CTS if this device requires it. */
2208 if (priv
->force_rtscts
) {
2209 dev_dbg(ddev
, "%s: forcing rtscts for this device\n", __func__
);
2210 termios
->c_cflag
|= CRTSCTS
;
2214 * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
2215 * support CS5/6 and revert the CSIZE setting instead.
2217 * CS5 however is used to control some smartcard readers which abuse
2218 * this limitation to switch modes. Original FTDI chips fall back to
2221 * TODO: Implement a quirk to only allow this with mentioned
2222 * readers. One I know of (Argolis Smartreader V1)
2223 * returns "USB smartcard server" as iInterface string.
2224 * The vendor didn't bother with a custom VID/PID of
2227 if (C_CSIZE(tty
) == CS6
) {
2228 dev_warn(ddev
, "requested CSIZE setting not supported\n");
2230 termios
->c_cflag
&= ~CSIZE
;
2232 termios
->c_cflag
|= old_termios
->c_cflag
& CSIZE
;
2234 termios
->c_cflag
|= CS8
;
2237 cflag
= termios
->c_cflag
;
2242 if (old_termios
->c_cflag
== termios
->c_cflag
2243 && old_termios
->c_ispeed
== termios
->c_ispeed
2244 && old_termios
->c_ospeed
== termios
->c_ospeed
)
2245 goto no_c_cflag_changes
;
2247 /* NOTE These routines can get interrupted by
2248 ftdi_sio_read_bulk_callback - need to examine what this means -
2249 don't see any problems yet */
2251 if ((old_termios
->c_cflag
& (CSIZE
|PARODD
|PARENB
|CMSPAR
|CSTOPB
)) ==
2252 (termios
->c_cflag
& (CSIZE
|PARODD
|PARENB
|CMSPAR
|CSTOPB
)))
2253 goto no_data_parity_stop_changes
;
2256 /* Set number of data bits, parity, stop bits */
2259 urb_value
|= (cflag
& CSTOPB
? FTDI_SIO_SET_DATA_STOP_BITS_2
:
2260 FTDI_SIO_SET_DATA_STOP_BITS_1
);
2261 if (cflag
& PARENB
) {
2263 urb_value
|= cflag
& PARODD
?
2264 FTDI_SIO_SET_DATA_PARITY_MARK
:
2265 FTDI_SIO_SET_DATA_PARITY_SPACE
;
2267 urb_value
|= cflag
& PARODD
?
2268 FTDI_SIO_SET_DATA_PARITY_ODD
:
2269 FTDI_SIO_SET_DATA_PARITY_EVEN
;
2271 urb_value
|= FTDI_SIO_SET_DATA_PARITY_NONE
;
2273 switch (cflag
& CSIZE
) {
2275 dev_dbg(ddev
, "Setting CS5 quirk\n");
2279 dev_dbg(ddev
, "Setting CS7\n");
2284 dev_dbg(ddev
, "Setting CS8\n");
2288 /* This is needed by the break command since it uses the same command
2289 - but is or'ed with this value */
2290 priv
->last_set_data_urb_value
= urb_value
;
2292 if (usb_control_msg(dev
, usb_sndctrlpipe(dev
, 0),
2293 FTDI_SIO_SET_DATA_REQUEST
,
2294 FTDI_SIO_SET_DATA_REQUEST_TYPE
,
2295 urb_value
, priv
->interface
,
2296 NULL
, 0, WDR_SHORT_TIMEOUT
) < 0) {
2297 dev_err(ddev
, "%s FAILED to set databits/stopbits/parity\n",
2301 /* Now do the baudrate */
2302 no_data_parity_stop_changes
:
2303 if ((cflag
& CBAUD
) == B0
) {
2304 /* Disable flow control */
2305 if (usb_control_msg(dev
, usb_sndctrlpipe(dev
, 0),
2306 FTDI_SIO_SET_FLOW_CTRL_REQUEST
,
2307 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE
,
2309 NULL
, 0, WDR_TIMEOUT
) < 0) {
2310 dev_err(ddev
, "%s error from disable flowcontrol urb\n",
2313 /* Drop RTS and DTR */
2314 clear_mctrl(port
, TIOCM_DTR
| TIOCM_RTS
);
2316 /* set the baudrate determined before */
2317 mutex_lock(&priv
->cfg_lock
);
2318 if (change_speed(tty
, port
))
2319 dev_err(ddev
, "%s urb failed to set baudrate\n", __func__
);
2320 mutex_unlock(&priv
->cfg_lock
);
2321 /* Ensure RTS and DTR are raised when baudrate changed from 0 */
2322 if (old_termios
&& (old_termios
->c_cflag
& CBAUD
) == B0
)
2323 set_mctrl(port
, TIOCM_DTR
| TIOCM_RTS
);
2326 /* Set flow control */
2327 /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
2329 if (cflag
& CRTSCTS
) {
2330 dev_dbg(ddev
, "%s Setting to CRTSCTS flow control\n", __func__
);
2331 if (usb_control_msg(dev
,
2332 usb_sndctrlpipe(dev
, 0),
2333 FTDI_SIO_SET_FLOW_CTRL_REQUEST
,
2334 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE
,
2335 0 , (FTDI_SIO_RTS_CTS_HS
| priv
->interface
),
2336 NULL
, 0, WDR_TIMEOUT
) < 0) {
2337 dev_err(ddev
, "urb failed to set to rts/cts flow control\n");
2343 * Check the IXOFF status in the iflag component of the
2344 * termios structure. If IXOFF is not set, the pre-xon/xoff
2347 if (iflag
& IXOFF
) {
2348 dev_dbg(ddev
, "%s request to enable xonxoff iflag=%04x\n",
2350 /* Try to enable the XON/XOFF on the ftdi_sio
2351 * Set the vstart and vstop -- could have been done up
2352 * above where a lot of other dereferencing is done but
2353 * that would be very inefficient as vstart and vstop
2354 * are not always needed.
2356 vstart
= termios
->c_cc
[VSTART
];
2357 vstop
= termios
->c_cc
[VSTOP
];
2358 urb_value
= (vstop
<< 8) | (vstart
);
2360 if (usb_control_msg(dev
,
2361 usb_sndctrlpipe(dev
, 0),
2362 FTDI_SIO_SET_FLOW_CTRL_REQUEST
,
2363 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE
,
2364 urb_value
, (FTDI_SIO_XON_XOFF_HS
2366 NULL
, 0, WDR_TIMEOUT
) < 0) {
2367 dev_err(&port
->dev
, "urb failed to set to "
2368 "xon/xoff flow control\n");
2371 /* else clause to only run if cflag ! CRTSCTS and iflag
2372 * ! XOFF. CHECKME Assuming XON/XOFF handled by tty
2373 * stack - not by device */
2374 dev_dbg(ddev
, "%s Turning off hardware flow control\n", __func__
);
2375 if (usb_control_msg(dev
,
2376 usb_sndctrlpipe(dev
, 0),
2377 FTDI_SIO_SET_FLOW_CTRL_REQUEST
,
2378 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE
,
2380 NULL
, 0, WDR_TIMEOUT
) < 0) {
2381 dev_err(ddev
, "urb failed to clear flow control\n");
2388 * Get modem-control status.
2390 * Returns the number of status bytes retrieved (device dependant), or
2391 * negative error code.
2393 static int ftdi_get_modem_status(struct usb_serial_port
*port
,
2394 unsigned char status
[2])
2396 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
2401 buf
= kmalloc(2, GFP_KERNEL
);
2405 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
2406 * the same format as the data returned from the in point.
2408 switch (priv
->chip_type
) {
2427 ret
= usb_control_msg(port
->serial
->dev
,
2428 usb_rcvctrlpipe(port
->serial
->dev
, 0),
2429 FTDI_SIO_GET_MODEM_STATUS_REQUEST
,
2430 FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE
,
2432 buf
, len
, WDR_TIMEOUT
);
2434 /* NOTE: We allow short responses and handle that below. */
2436 dev_err(&port
->dev
, "failed to get modem status: %d\n", ret
);
2439 ret
= usb_translate_errors(ret
);
2449 dev_dbg(&port
->dev
, "%s - 0x%02x%02x\n", __func__
, status
[0],
2457 static int ftdi_tiocmget(struct tty_struct
*tty
)
2459 struct usb_serial_port
*port
= tty
->driver_data
;
2460 struct ftdi_private
*priv
= usb_get_serial_port_data(port
);
2461 unsigned char buf
[2];
2464 ret
= ftdi_get_modem_status(port
, buf
);
2468 ret
= (buf
[0] & FTDI_SIO_DSR_MASK
? TIOCM_DSR
: 0) |
2469 (buf
[0] & FTDI_SIO_CTS_MASK
? TIOCM_CTS
: 0) |
2470 (buf
[0] & FTDI_SIO_RI_MASK
? TIOCM_RI
: 0) |
2471 (buf
[0] & FTDI_SIO_RLSD_MASK
? TIOCM_CD
: 0) |
2477 static int ftdi_tiocmset(struct tty_struct
*tty
,
2478 unsigned int set
, unsigned int clear
)
2480 struct usb_serial_port
*port
= tty
->driver_data
;
2482 return update_mctrl(port
, set
, clear
);
2485 static int ftdi_ioctl(struct tty_struct
*tty
,
2486 unsigned int cmd
, unsigned long arg
)
2488 struct usb_serial_port
*port
= tty
->driver_data
;
2489 void __user
*argp
= (void __user
*)arg
;
2493 return get_serial_info(port
, argp
);
2495 return set_serial_info(tty
, port
, argp
);
2497 return get_lsr_info(port
, argp
);
2502 return -ENOIOCTLCMD
;
2505 module_usb_serial_driver(serial_drivers
, id_table_combined
);
2507 MODULE_AUTHOR(DRIVER_AUTHOR
);
2508 MODULE_DESCRIPTION(DRIVER_DESC
);
2509 MODULE_LICENSE("GPL");
2511 module_param(ndi_latency_timer
, int, S_IRUGO
| S_IWUSR
);
2512 MODULE_PARM_DESC(ndi_latency_timer
, "NDI device latency timer override");
