?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ia64: add pci_get_legacy_ide_irq()
[linux/fpc-iii.git] / drivers / pci / hotplug / ibmphp_hpc.c
blob1a3eb8d3d4cbd8b5bbeeb277a14124a992e5c7f2
1 /*
2 * IBM Hot Plug Controller Driver
3 *
4 * Written By: Jyoti Shah, IBM Corporation
5 *
6 * Copyright (C) 2001-2003 IBM Corp.
7 *
8 * All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * Send feedback to <gregkh@us.ibm.com>
26 * <jshah@us.ibm.com>
27 *
28 */
29
30 #include <linux/wait.h>
31 #include <linux/time.h>
32 #include <linux/delay.h>
33 #include <linux/module.h>
34 #include <linux/pci.h>
35 #include <linux/smp_lock.h>
36 #include <linux/init.h>
37 #include "ibmphp.h"
38
39 static int to_debug = FALSE;
40 #define debug_polling(fmt, arg...) do { if (to_debug) debug (fmt, arg); } while (0)
41
42 //----------------------------------------------------------------------------
43 // timeout values
44 //----------------------------------------------------------------------------
45 #define CMD_COMPLETE_TOUT_SEC 60 // give HPC 60 sec to finish cmd
46 #define HPC_CTLR_WORKING_TOUT 60 // give HPC 60 sec to finish cmd
47 #define HPC_GETACCESS_TIMEOUT 60 // seconds
48 #define POLL_INTERVAL_SEC 2 // poll HPC every 2 seconds
49 #define POLL_LATCH_CNT 5 // poll latch 5 times, then poll slots
50
51 //----------------------------------------------------------------------------
52 // Winnipeg Architected Register Offsets
53 //----------------------------------------------------------------------------
54 #define WPG_I2CMBUFL_OFFSET 0x08 // I2C Message Buffer Low
55 #define WPG_I2CMOSUP_OFFSET 0x10 // I2C Master Operation Setup Reg
56 #define WPG_I2CMCNTL_OFFSET 0x20 // I2C Master Control Register
57 #define WPG_I2CPARM_OFFSET 0x40 // I2C Parameter Register
58 #define WPG_I2CSTAT_OFFSET 0x70 // I2C Status Register
59
60 //----------------------------------------------------------------------------
61 // Winnipeg Store Type commands (Add this commands to the register offset)
62 //----------------------------------------------------------------------------
63 #define WPG_I2C_AND 0x1000 // I2C AND operation
64 #define WPG_I2C_OR 0x2000 // I2C OR operation
65
66 //----------------------------------------------------------------------------
67 // Command set for I2C Master Operation Setup Register
68 //----------------------------------------------------------------------------
69 #define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
70 #define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
71 #define WPG_READDIRECT_MASK 0x10010000
72 #define WPG_WRITEDIRECT_MASK 0x60010000
73
74
75 //----------------------------------------------------------------------------
76 // bit masks for I2C Master Control Register
77 //----------------------------------------------------------------------------
78 #define WPG_I2CMCNTL_STARTOP_MASK 0x00000002 // Start the Operation
79
80 //----------------------------------------------------------------------------
81 //
82 //----------------------------------------------------------------------------
83 #define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
84
85 //----------------------------------------------------------------------------
86 // command index
87 //----------------------------------------------------------------------------
88 #define WPG_1ST_SLOT_INDEX 0x01 // index - 1st slot for ctlr
89 #define WPG_CTLR_INDEX 0x0F // index - ctlr
90 #define WPG_1ST_EXTSLOT_INDEX 0x10 // index - 1st ext slot for ctlr
91 #define WPG_1ST_BUS_INDEX 0x1F // index - 1st bus for ctlr
92
93 //----------------------------------------------------------------------------
94 // macro utilities
95 //----------------------------------------------------------------------------
96 // if bits 20,22,25,26,27,29,30 are OFF return TRUE
97 #define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? FALSE : TRUE))
98
99 //----------------------------------------------------------------------------
100 // global variables
101 //----------------------------------------------------------------------------
102 static int ibmphp_shutdown;
103 static int tid_poll;
104 static struct semaphore sem_hpcaccess; // lock access to HPC
105 static struct semaphore semOperations; // lock all operations and
106 // access to data structures
107 static struct semaphore sem_exit; // make sure polling thread goes away
108 //----------------------------------------------------------------------------
109 // local function prototypes
110 //----------------------------------------------------------------------------
111 static u8 i2c_ctrl_read (struct controller *, void __iomem *, u8);
112 static u8 i2c_ctrl_write (struct controller *, void __iomem *, u8, u8);
113 static u8 hpc_writecmdtoindex (u8, u8);
114 static u8 hpc_readcmdtoindex (u8, u8);
115 static void get_hpc_access (void);
116 static void free_hpc_access (void);
117 static void poll_hpc (void);
118 static int process_changeinstatus (struct slot *, struct slot *);
119 static int process_changeinlatch (u8, u8, struct controller *);
120 static int hpc_poll_thread (void *);
121 static int hpc_wait_ctlr_notworking (int, struct controller *, void __iomem *, u8 *);
122 //----------------------------------------------------------------------------
123
124
125 /*----------------------------------------------------------------------
126 * Name: ibmphp_hpc_initvars
127 *
128 * Action: initialize semaphores and variables
129 *---------------------------------------------------------------------*/
130 void __init ibmphp_hpc_initvars (void)
131 {
132 debug ("%s - Entry\n", __FUNCTION__);
133
134 init_MUTEX (&sem_hpcaccess);
135 init_MUTEX (&semOperations);
136 init_MUTEX_LOCKED (&sem_exit);
137 to_debug = FALSE;
138 ibmphp_shutdown = FALSE;
139 tid_poll = 0;
140
141 debug ("%s - Exit\n", __FUNCTION__);
142 }
143
144 /*----------------------------------------------------------------------
145 * Name: i2c_ctrl_read
146 *
147 * Action: read from HPC over I2C
148 *
149 *---------------------------------------------------------------------*/
150 static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
151 {
152 u8 status;
153 int i;
154 void __iomem *wpg_addr; // base addr + offset
155 unsigned long wpg_data; // data to/from WPG LOHI format
156 unsigned long ultemp;
157 unsigned long data; // actual data HILO format
158
159 debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
160
161 //--------------------------------------------------------------------
162 // READ - step 1
163 // read at address, byte length, I2C address (shifted), index
164 // or read direct, byte length, index
165 if (ctlr_ptr->ctlr_type == 0x02) {
166 data = WPG_READATADDR_MASK;
167 // fill in I2C address
168 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
169 ultemp = ultemp >> 1;
170 data |= (ultemp << 8);
171
172 // fill in index
173 data |= (unsigned long)index;
174 } else if (ctlr_ptr->ctlr_type == 0x04) {
175 data = WPG_READDIRECT_MASK;
176
177 // fill in index
178 ultemp = (unsigned long)index;
179 ultemp = ultemp << 8;
180 data |= ultemp;
181 } else {
182 err ("this controller type is not supported \n");
183 return HPC_ERROR;
184 }
185
186 wpg_data = swab32 (data); // swap data before writing
187 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
188 writel (wpg_data, wpg_addr);
189
190 //--------------------------------------------------------------------
191 // READ - step 2 : clear the message buffer
192 data = 0x00000000;
193 wpg_data = swab32 (data);
194 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
195 writel (wpg_data, wpg_addr);
196
197 //--------------------------------------------------------------------
198 // READ - step 3 : issue start operation, I2C master control bit 30:ON
199 // 2020 : [20] OR operation at [20] offset 0x20
200 data = WPG_I2CMCNTL_STARTOP_MASK;
201 wpg_data = swab32 (data);
202 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
203 writel (wpg_data, wpg_addr);
204
205 //--------------------------------------------------------------------
206 // READ - step 4 : wait until start operation bit clears
207 i = CMD_COMPLETE_TOUT_SEC;
208 while (i) {
209 msleep(10);
210 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
211 wpg_data = readl (wpg_addr);
212 data = swab32 (wpg_data);
213 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
214 break;
215 i--;
216 }
217 if (i == 0) {
218 debug ("%s - Error : WPG timeout\n", __FUNCTION__);
219 return HPC_ERROR;
220 }
221 //--------------------------------------------------------------------
222 // READ - step 5 : read I2C status register
223 i = CMD_COMPLETE_TOUT_SEC;
224 while (i) {
225 msleep(10);
226 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
227 wpg_data = readl (wpg_addr);
228 data = swab32 (wpg_data);
229 if (HPC_I2CSTATUS_CHECK (data))
230 break;
231 i--;
232 }
233 if (i == 0) {
234 debug ("ctrl_read - Exit Error:I2C timeout\n");
235 return HPC_ERROR;
236 }
237
238 //--------------------------------------------------------------------
239 // READ - step 6 : get DATA
240 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
241 wpg_data = readl (wpg_addr);
242 data = swab32 (wpg_data);
243
244 status = (u8) data;
245
246 debug_polling ("%s - Exit index[%x] status[%x]\n", __FUNCTION__, index, status);
247
248 return (status);
249 }
250
251 /*----------------------------------------------------------------------
252 * Name: i2c_ctrl_write
253 *
254 * Action: write to HPC over I2C
255 *
256 * Return 0 or error codes
257 *---------------------------------------------------------------------*/
258 static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
259 {
260 u8 rc;
261 void __iomem *wpg_addr; // base addr + offset
262 unsigned long wpg_data; // data to/from WPG LOHI format
263 unsigned long ultemp;
264 unsigned long data; // actual data HILO format
265 int i;
266
267 debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
268
269 rc = 0;
270 //--------------------------------------------------------------------
271 // WRITE - step 1
272 // write at address, byte length, I2C address (shifted), index
273 // or write direct, byte length, index
274 data = 0x00000000;
275
276 if (ctlr_ptr->ctlr_type == 0x02) {
277 data = WPG_WRITEATADDR_MASK;
278 // fill in I2C address
279 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
280 ultemp = ultemp >> 1;
281 data |= (ultemp << 8);
282
283 // fill in index
284 data |= (unsigned long)index;
285 } else if (ctlr_ptr->ctlr_type == 0x04) {
286 data = WPG_WRITEDIRECT_MASK;
287
288 // fill in index
289 ultemp = (unsigned long)index;
290 ultemp = ultemp << 8;
291 data |= ultemp;
292 } else {
293 err ("this controller type is not supported \n");
294 return HPC_ERROR;
295 }
296
297 wpg_data = swab32 (data); // swap data before writing
298 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
299 writel (wpg_data, wpg_addr);
300
301 //--------------------------------------------------------------------
302 // WRITE - step 2 : clear the message buffer
303 data = 0x00000000 | (unsigned long)cmd;
304 wpg_data = swab32 (data);
305 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
306 writel (wpg_data, wpg_addr);
307
308 //--------------------------------------------------------------------
309 // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
310 // 2020 : [20] OR operation at [20] offset 0x20
311 data = WPG_I2CMCNTL_STARTOP_MASK;
312 wpg_data = swab32 (data);
313 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
314 writel (wpg_data, wpg_addr);
315
316 //--------------------------------------------------------------------
317 // WRITE - step 4 : wait until start operation bit clears
318 i = CMD_COMPLETE_TOUT_SEC;
319 while (i) {
320 msleep(10);
321 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
322 wpg_data = readl (wpg_addr);
323 data = swab32 (wpg_data);
324 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
325 break;
326 i--;
327 }
328 if (i == 0) {
329 debug ("%s - Exit Error:WPG timeout\n", __FUNCTION__);
330 rc = HPC_ERROR;
331 }
332
333 //--------------------------------------------------------------------
334 // WRITE - step 5 : read I2C status register
335 i = CMD_COMPLETE_TOUT_SEC;
336 while (i) {
337 msleep(10);
338 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
339 wpg_data = readl (wpg_addr);
340 data = swab32 (wpg_data);
341 if (HPC_I2CSTATUS_CHECK (data))
342 break;
343 i--;
344 }
345 if (i == 0) {
346 debug ("ctrl_read - Error : I2C timeout\n");
347 rc = HPC_ERROR;
348 }
349
350 debug_polling ("%s Exit rc[%x]\n", __FUNCTION__, rc);
351 return (rc);
352 }
353
354 //------------------------------------------------------------
355 // Read from ISA type HPC
356 //------------------------------------------------------------
357 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
358 {
359 u16 start_address;
360 u16 end_address;
361 u8 data;
362
363 start_address = ctlr_ptr->u.isa_ctlr.io_start;
364 end_address = ctlr_ptr->u.isa_ctlr.io_end;
365 data = inb (start_address + offset);
366 return data;
367 }
368
369 //--------------------------------------------------------------
370 // Write to ISA type HPC
371 //--------------------------------------------------------------
372 static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
373 {
374 u16 start_address;
375 u16 port_address;
376
377 start_address = ctlr_ptr->u.isa_ctlr.io_start;
378 port_address = start_address + (u16) offset;
379 outb (data, port_address);
380 }
381
382 static u8 pci_ctrl_read (struct controller *ctrl, u8 offset)
383 {
384 u8 data = 0x00;
385 debug ("inside pci_ctrl_read\n");
386 if (ctrl->ctrl_dev)
387 pci_read_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
388 return data;
389 }
390
391 static u8 pci_ctrl_write (struct controller *ctrl, u8 offset, u8 data)
392 {
393 u8 rc = -ENODEV;
394 debug ("inside pci_ctrl_write\n");
395 if (ctrl->ctrl_dev) {
396 pci_write_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
397 rc = 0;
398 }
399 return rc;
400 }
401
402 static u8 ctrl_read (struct controller *ctlr, void __iomem *base, u8 offset)
403 {
404 u8 rc;
405 switch (ctlr->ctlr_type) {
406 case 0:
407 rc = isa_ctrl_read (ctlr, offset);
408 break;
409 case 1:
410 rc = pci_ctrl_read (ctlr, offset);
411 break;
412 case 2:
413 case 4:
414 rc = i2c_ctrl_read (ctlr, base, offset);
415 break;
416 default:
417 return -ENODEV;
418 }
419 return rc;
420 }
421
422 static u8 ctrl_write (struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
423 {
424 u8 rc = 0;
425 switch (ctlr->ctlr_type) {
426 case 0:
427 isa_ctrl_write(ctlr, offset, data);
428 break;
429 case 1:
430 rc = pci_ctrl_write (ctlr, offset, data);
431 break;
432 case 2:
433 case 4:
434 rc = i2c_ctrl_write(ctlr, base, offset, data);
435 break;
436 default:
437 return -ENODEV;
438 }
439 return rc;
440 }
441 /*----------------------------------------------------------------------
442 * Name: hpc_writecmdtoindex()
443 *
444 * Action: convert a write command to proper index within a controller
445 *
446 * Return index, HPC_ERROR
447 *---------------------------------------------------------------------*/
448 static u8 hpc_writecmdtoindex (u8 cmd, u8 index)
449 {
450 u8 rc;
451
452 switch (cmd) {
453 case HPC_CTLR_ENABLEIRQ: // 0x00.N.15
454 case HPC_CTLR_CLEARIRQ: // 0x06.N.15
455 case HPC_CTLR_RESET: // 0x07.N.15
456 case HPC_CTLR_IRQSTEER: // 0x08.N.15
457 case HPC_CTLR_DISABLEIRQ: // 0x01.N.15
458 case HPC_ALLSLOT_ON: // 0x11.N.15
459 case HPC_ALLSLOT_OFF: // 0x12.N.15
460 rc = 0x0F;
461 break;
462
463 case HPC_SLOT_OFF: // 0x02.Y.0-14
464 case HPC_SLOT_ON: // 0x03.Y.0-14
465 case HPC_SLOT_ATTNOFF: // 0x04.N.0-14
466 case HPC_SLOT_ATTNON: // 0x05.N.0-14
467 case HPC_SLOT_BLINKLED: // 0x13.N.0-14
468 rc = index;
469 break;
470
471 case HPC_BUS_33CONVMODE:
472 case HPC_BUS_66CONVMODE:
473 case HPC_BUS_66PCIXMODE:
474 case HPC_BUS_100PCIXMODE:
475 case HPC_BUS_133PCIXMODE:
476 rc = index + WPG_1ST_BUS_INDEX - 1;
477 break;
478
479 default:
480 err ("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
481 rc = HPC_ERROR;
482 }
483
484 return rc;
485 }
486
487 /*----------------------------------------------------------------------
488 * Name: hpc_readcmdtoindex()
489 *
490 * Action: convert a read command to proper index within a controller
491 *
492 * Return index, HPC_ERROR
493 *---------------------------------------------------------------------*/
494 static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
495 {
496 u8 rc;
497
498 switch (cmd) {
499 case READ_CTLRSTATUS:
500 rc = 0x0F;
501 break;
502 case READ_SLOTSTATUS:
503 case READ_ALLSTAT:
504 rc = index;
505 break;
506 case READ_EXTSLOTSTATUS:
507 rc = index + WPG_1ST_EXTSLOT_INDEX;
508 break;
509 case READ_BUSSTATUS:
510 rc = index + WPG_1ST_BUS_INDEX - 1;
511 break;
512 case READ_SLOTLATCHLOWREG:
513 rc = 0x28;
514 break;
515 case READ_REVLEVEL:
516 rc = 0x25;
517 break;
518 case READ_HPCOPTIONS:
519 rc = 0x27;
520 break;
521 default:
522 rc = HPC_ERROR;
523 }
524 return rc;
525 }
526
527 /*----------------------------------------------------------------------
528 * Name: HPCreadslot()
529 *
530 * Action: issue a READ command to HPC
531 *
532 * Input: pslot - can not be NULL for READ_ALLSTAT
533 * pstatus - can be NULL for READ_ALLSTAT
534 *
535 * Return 0 or error codes
536 *---------------------------------------------------------------------*/
537 int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
538 {
539 void __iomem *wpg_bbar = NULL;
540 struct controller *ctlr_ptr;
541 struct list_head *pslotlist;
542 u8 index, status;
543 int rc = 0;
544 int busindex;
545
546 debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
547
548 if ((pslot == NULL)
549 || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
550 rc = -EINVAL;
551 err ("%s - Error invalid pointer, rc[%d]\n", __FUNCTION__, rc);
552 return rc;
553 }
554
555 if (cmd == READ_BUSSTATUS) {
556 busindex = ibmphp_get_bus_index (pslot->bus);
557 if (busindex < 0) {
558 rc = -EINVAL;
559 err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
560 return rc;
561 } else
562 index = (u8) busindex;
563 } else
564 index = pslot->ctlr_index;
565
566 index = hpc_readcmdtoindex (cmd, index);
567
568 if (index == HPC_ERROR) {
569 rc = -EINVAL;
570 err ("%s - Exit Error:invalid index, rc[%d]\n", __FUNCTION__, rc);
571 return rc;
572 }
573
574 ctlr_ptr = pslot->ctrl;
575
576 get_hpc_access ();
577
578 //--------------------------------------------------------------------
579 // map physical address to logical address
580 //--------------------------------------------------------------------
581 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
582 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
583
584 //--------------------------------------------------------------------
585 // check controller status before reading
586 //--------------------------------------------------------------------
587 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
588 if (!rc) {
589 switch (cmd) {
590 case READ_ALLSTAT:
591 // update the slot structure
592 pslot->ctrl->status = status;
593 pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
594 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
595 &status);
596 if (!rc)
597 pslot->ext_status = ctrl_read (ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
598
599 break;
600
601 case READ_SLOTSTATUS:
602 // DO NOT update the slot structure
603 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
604 break;
605
606 case READ_EXTSLOTSTATUS:
607 // DO NOT update the slot structure
608 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
609 break;
610
611 case READ_CTLRSTATUS:
612 // DO NOT update the slot structure
613 *pstatus = status;
614 break;
615
616 case READ_BUSSTATUS:
617 pslot->busstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
618 break;
619 case READ_REVLEVEL:
620 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
621 break;
622 case READ_HPCOPTIONS:
623 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
624 break;
625 case READ_SLOTLATCHLOWREG:
626 // DO NOT update the slot structure
627 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
628 break;
629
630 // Not used
631 case READ_ALLSLOT:
632 list_for_each (pslotlist, &ibmphp_slot_head) {
633 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
634 index = pslot->ctlr_index;
635 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr,
636 wpg_bbar, &status);
637 if (!rc) {
638 pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
639 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT,
640 ctlr_ptr, wpg_bbar, &status);
641 if (!rc)
642 pslot->ext_status =
643 ctrl_read (ctlr_ptr, wpg_bbar,
644 index + WPG_1ST_EXTSLOT_INDEX);
645 } else {
646 err ("%s - Error ctrl_read failed\n", __FUNCTION__);
647 rc = -EINVAL;
648 break;
649 }
650 }
651 break;
652 default:
653 rc = -EINVAL;
654 break;
655 }
656 }
657 //--------------------------------------------------------------------
658 // cleanup
659 //--------------------------------------------------------------------
660
661 // remove physical to logical address mapping
662 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
663 iounmap (wpg_bbar);
664
665 free_hpc_access ();
666
667 debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
668 return rc;
669 }
670
671 /*----------------------------------------------------------------------
672 * Name: ibmphp_hpc_writeslot()
673 *
674 * Action: issue a WRITE command to HPC
675 *---------------------------------------------------------------------*/
676 int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
677 {
678 void __iomem *wpg_bbar = NULL;
679 struct controller *ctlr_ptr;
680 u8 index, status;
681 int busindex;
682 u8 done;
683 int rc = 0;
684 int timeout;
685
686 debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
687 if (pslot == NULL) {
688 rc = -EINVAL;
689 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
690 return rc;
691 }
692
693 if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
694 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
695 (cmd == HPC_BUS_133PCIXMODE)) {
696 busindex = ibmphp_get_bus_index (pslot->bus);
697 if (busindex < 0) {
698 rc = -EINVAL;
699 err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
700 return rc;
701 } else
702 index = (u8) busindex;
703 } else
704 index = pslot->ctlr_index;
705
706 index = hpc_writecmdtoindex (cmd, index);
707
708 if (index == HPC_ERROR) {
709 rc = -EINVAL;
710 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
711 return rc;
712 }
713
714 ctlr_ptr = pslot->ctrl;
715
716 get_hpc_access ();
717
718 //--------------------------------------------------------------------
719 // map physical address to logical address
720 //--------------------------------------------------------------------
721 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
722 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
723
724 debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
725 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
726 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
727 }
728 //--------------------------------------------------------------------
729 // check controller status before writing
730 //--------------------------------------------------------------------
731 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
732 if (!rc) {
733
734 ctrl_write (ctlr_ptr, wpg_bbar, index, cmd);
735
736 //--------------------------------------------------------------------
737 // check controller is still not working on the command
738 //--------------------------------------------------------------------
739 timeout = CMD_COMPLETE_TOUT_SEC;
740 done = FALSE;
741 while (!done) {
742 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
743 &status);
744 if (!rc) {
745 if (NEEDTOCHECK_CMDSTATUS (cmd)) {
746 if (CTLR_FINISHED (status) == HPC_CTLR_FINISHED_YES)
747 done = TRUE;
748 } else
749 done = TRUE;
750 }
751 if (!done) {
752 msleep(1000);
753 if (timeout < 1) {
754 done = TRUE;
755 err ("%s - Error command complete timeout\n", __FUNCTION__);
756 rc = -EFAULT;
757 } else
758 timeout--;
759 }
760 }
761 ctlr_ptr->status = status;
762 }
763 // cleanup
764
765 // remove physical to logical address mapping
766 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
767 iounmap (wpg_bbar);
768 free_hpc_access ();
769
770 debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
771 return rc;
772 }
773
774 /*----------------------------------------------------------------------
775 * Name: get_hpc_access()
776 *
777 * Action: make sure only one process can access HPC at one time
778 *---------------------------------------------------------------------*/
779 static void get_hpc_access (void)
780 {
781 down (&sem_hpcaccess);
782 }
783
784 /*----------------------------------------------------------------------
785 * Name: free_hpc_access()
786 *---------------------------------------------------------------------*/
787 void free_hpc_access (void)
788 {
789 up (&sem_hpcaccess);
790 }
791
792 /*----------------------------------------------------------------------
793 * Name: ibmphp_lock_operations()
794 *
795 * Action: make sure only one process can change the data structure
796 *---------------------------------------------------------------------*/
797 void ibmphp_lock_operations (void)
798 {
799 down (&semOperations);
800 to_debug = TRUE;
801 }
802
803 /*----------------------------------------------------------------------
804 * Name: ibmphp_unlock_operations()
805 *---------------------------------------------------------------------*/
806 void ibmphp_unlock_operations (void)
807 {
808 debug ("%s - Entry\n", __FUNCTION__);
809 up (&semOperations);
810 to_debug = FALSE;
811 debug ("%s - Exit\n", __FUNCTION__);
812 }
813
814 /*----------------------------------------------------------------------
815 * Name: poll_hpc()
816 *---------------------------------------------------------------------*/
817 #define POLL_LATCH_REGISTER 0
818 #define POLL_SLOTS 1
819 #define POLL_SLEEP 2
820 static void poll_hpc (void)
821 {
822 struct slot myslot;
823 struct slot *pslot = NULL;
824 struct list_head *pslotlist;
825 int rc;
826 int poll_state = POLL_LATCH_REGISTER;
827 u8 oldlatchlow = 0x00;
828 u8 curlatchlow = 0x00;
829 int poll_count = 0;
830 u8 ctrl_count = 0x00;
831
832 debug ("%s - Entry\n", __FUNCTION__);
833
834 while (!ibmphp_shutdown) {
835 if (ibmphp_shutdown)
836 break;
837
838 /* try to get the lock to do some kind of hardware access */
839 down (&semOperations);
840
841 switch (poll_state) {
842 case POLL_LATCH_REGISTER:
843 oldlatchlow = curlatchlow;
844 ctrl_count = 0x00;
845 list_for_each (pslotlist, &ibmphp_slot_head) {
846 if (ctrl_count >= ibmphp_get_total_controllers())
847 break;
848 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
849 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
850 ctrl_count++;
851 if (READ_SLOT_LATCH (pslot->ctrl)) {
852 rc = ibmphp_hpc_readslot (pslot,
853 READ_SLOTLATCHLOWREG,
854 &curlatchlow);
855 if (oldlatchlow != curlatchlow)
856 process_changeinlatch (oldlatchlow,
857 curlatchlow,
858 pslot->ctrl);
859 }
860 }
861 }
862 ++poll_count;
863 poll_state = POLL_SLEEP;
864 break;
865 case POLL_SLOTS:
866 list_for_each (pslotlist, &ibmphp_slot_head) {
867 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
868 // make a copy of the old status
869 memcpy ((void *) &myslot, (void *) pslot,
870 sizeof (struct slot));
871 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
872 if ((myslot.status != pslot->status)
873 || (myslot.ext_status != pslot->ext_status))
874 process_changeinstatus (pslot, &myslot);
875 }
876 ctrl_count = 0x00;
877 list_for_each (pslotlist, &ibmphp_slot_head) {
878 if (ctrl_count >= ibmphp_get_total_controllers())
879 break;
880 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
881 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
882 ctrl_count++;
883 if (READ_SLOT_LATCH (pslot->ctrl))
884 rc = ibmphp_hpc_readslot (pslot,
885 READ_SLOTLATCHLOWREG,
886 &curlatchlow);
887 }
888 }
889 ++poll_count;
890 poll_state = POLL_SLEEP;
891 break;
892 case POLL_SLEEP:
893 /* don't sleep with a lock on the hardware */
894 up (&semOperations);
895 msleep(POLL_INTERVAL_SEC * 1000);
896
897 if (ibmphp_shutdown)
898 break;
899
900 down (&semOperations);
901
902 if (poll_count >= POLL_LATCH_CNT) {
903 poll_count = 0;
904 poll_state = POLL_SLOTS;
905 } else
906 poll_state = POLL_LATCH_REGISTER;
907 break;
908 }
909 /* give up the hardware semaphore */
910 up (&semOperations);
911 /* sleep for a short time just for good measure */
912 msleep(100);
913 }
914 up (&sem_exit);
915 debug ("%s - Exit\n", __FUNCTION__);
916 }
917
918
919 /*----------------------------------------------------------------------
920 * Name: process_changeinstatus
921 *
922 * Action: compare old and new slot status, process the change in status
923 *
924 * Input: pointer to slot struct, old slot struct
925 *
926 * Return 0 or error codes
927 * Value:
928 *
929 * Side
930 * Effects: None.
931 *
932 * Notes:
933 *---------------------------------------------------------------------*/
934 static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
935 {
936 u8 status;
937 int rc = 0;
938 u8 disable = FALSE;
939 u8 update = FALSE;
940
941 debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
942
943 // bit 0 - HPC_SLOT_POWER
944 if ((pslot->status & 0x01) != (poldslot->status & 0x01))
945 update = TRUE;
946
947 // bit 1 - HPC_SLOT_CONNECT
948 // ignore
949
950 // bit 2 - HPC_SLOT_ATTN
951 if ((pslot->status & 0x04) != (poldslot->status & 0x04))
952 update = TRUE;
953
954 // bit 3 - HPC_SLOT_PRSNT2
955 // bit 4 - HPC_SLOT_PRSNT1
956 if (((pslot->status & 0x08) != (poldslot->status & 0x08))
957 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
958 update = TRUE;
959
960 // bit 5 - HPC_SLOT_PWRGD
961 if ((pslot->status & 0x20) != (poldslot->status & 0x20))
962 // OFF -> ON: ignore, ON -> OFF: disable slot
963 if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
964 disable = TRUE;
965
966 // bit 6 - HPC_SLOT_BUS_SPEED
967 // ignore
968
969 // bit 7 - HPC_SLOT_LATCH
970 if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
971 update = TRUE;
972 // OPEN -> CLOSE
973 if (pslot->status & 0x80) {
974 if (SLOT_PWRGD (pslot->status)) {
975 // power goes on and off after closing latch
976 // check again to make sure power is still ON
977 msleep(1000);
978 rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
979 if (SLOT_PWRGD (status))
980 update = TRUE;
981 else // overwrite power in pslot to OFF
982 pslot->status &= ~HPC_SLOT_POWER;
983 }
984 }
985 // CLOSE -> OPEN
986 else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
987 && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
988 disable = TRUE;
989 }
990 // else - ignore
991 }
992 // bit 4 - HPC_SLOT_BLINK_ATTN
993 if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
994 update = TRUE;
995
996 if (disable) {
997 debug ("process_changeinstatus - disable slot\n");
998 pslot->flag = FALSE;
999 rc = ibmphp_do_disable_slot (pslot);
1000 }
1001
1002 if (update || disable) {
1003 ibmphp_update_slot_info (pslot);
1004 }
1005
1006 debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __FUNCTION__, rc, disable, update);
1007
1008 return rc;
1009 }
1010
1011 /*----------------------------------------------------------------------
1012 * Name: process_changeinlatch
1013 *
1014 * Action: compare old and new latch reg status, process the change
1015 *
1016 * Input: old and current latch register status
1017 *
1018 * Return 0 or error codes
1019 * Value:
1020 *---------------------------------------------------------------------*/
1021 static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
1022 {
1023 struct slot myslot, *pslot;
1024 u8 i;
1025 u8 mask;
1026 int rc = 0;
1027
1028 debug ("%s - Entry old[%x], new[%x]\n", __FUNCTION__, old, new);
1029 // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
1030
1031 for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
1032 mask = 0x01 << i;
1033 if ((mask & old) != (mask & new)) {
1034 pslot = ibmphp_get_slot_from_physical_num (i);
1035 if (pslot) {
1036 memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
1037 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
1038 debug ("%s - call process_changeinstatus for slot[%d]\n", __FUNCTION__, i);
1039 process_changeinstatus (pslot, &myslot);
1040 } else {
1041 rc = -EINVAL;
1042 err ("%s - Error bad pointer for slot[%d]\n", __FUNCTION__, i);
1043 }
1044 }
1045 }
1046 debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
1047 return rc;
1048 }
1049
1050 /*----------------------------------------------------------------------
1051 * Name: hpc_poll_thread
1052 *
1053 * Action: polling
1054 *
1055 * Return 0
1056 * Value:
1057 *---------------------------------------------------------------------*/
1058 static int hpc_poll_thread (void *data)
1059 {
1060 debug ("%s - Entry\n", __FUNCTION__);
1061
1062 daemonize("hpc_poll");
1063 allow_signal(SIGKILL);
1064
1065 poll_hpc ();
1066
1067 tid_poll = 0;
1068 debug ("%s - Exit\n", __FUNCTION__);
1069 return 0;
1070 }
1071
1072
1073 /*----------------------------------------------------------------------
1074 * Name: ibmphp_hpc_start_poll_thread
1075 *
1076 * Action: start polling thread
1077 *---------------------------------------------------------------------*/
1078 int __init ibmphp_hpc_start_poll_thread (void)
1079 {
1080 int rc = 0;
1081
1082 debug ("%s - Entry\n", __FUNCTION__);
1083
1084 tid_poll = kernel_thread (hpc_poll_thread, NULL, 0);
1085 if (tid_poll < 0) {
1086 err ("%s - Error, thread not started\n", __FUNCTION__);
1087 rc = -1;
1088 }
1089
1090 debug ("%s - Exit tid_poll[%d] rc[%d]\n", __FUNCTION__, tid_poll, rc);
1091 return rc;
1092 }
1093
1094 /*----------------------------------------------------------------------
1095 * Name: ibmphp_hpc_stop_poll_thread
1096 *
1097 * Action: stop polling thread and cleanup
1098 *---------------------------------------------------------------------*/
1099 void __exit ibmphp_hpc_stop_poll_thread (void)
1100 {
1101 debug ("%s - Entry\n", __FUNCTION__);
1102
1103 ibmphp_shutdown = TRUE;
1104 debug ("before locking operations \n");
1105 ibmphp_lock_operations ();
1106 debug ("after locking operations \n");
1107
1108 // wait for poll thread to exit
1109 debug ("before sem_exit down \n");
1110 down (&sem_exit);
1111 debug ("after sem_exit down \n");
1112
1113 // cleanup
1114 debug ("before free_hpc_access \n");
1115 free_hpc_access ();
1116 debug ("after free_hpc_access \n");
1117 ibmphp_unlock_operations ();
1118 debug ("after unlock operations \n");
1119 up (&sem_exit);
1120 debug ("after sem exit up\n");
1121
1122 debug ("%s - Exit\n", __FUNCTION__);
1123 }
1124
1125 /*----------------------------------------------------------------------
1126 * Name: hpc_wait_ctlr_notworking
1127 *
1128 * Action: wait until the controller is in a not working state
1129 *
1130 * Return 0, HPC_ERROR
1131 * Value:
1132 *---------------------------------------------------------------------*/
1133 static int hpc_wait_ctlr_notworking (int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1134 u8 * pstatus)
1135 {
1136 int rc = 0;
1137 u8 done = FALSE;
1138
1139 debug_polling ("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1140
1141 while (!done) {
1142 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1143 if (*pstatus == HPC_ERROR) {
1144 rc = HPC_ERROR;
1145 done = TRUE;
1146 }
1147 if (CTLR_WORKING (*pstatus) == HPC_CTLR_WORKING_NO)
1148 done = TRUE;
1149 if (!done) {
1150 msleep(1000);
1151 if (timeout < 1) {
1152 done = TRUE;
1153 err ("HPCreadslot - Error ctlr timeout\n");
1154 rc = HPC_ERROR;
1155 } else
1156 timeout--;
1157 }
1158 }
1159 debug_polling ("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
1160 return rc;
1161 }
Linux with added FPC-III support