2 * linux/kernel/power/swap.c
4 * This file provides functions for reading the suspend image from
5 * and writing it to a swap partition.
7 * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
8 * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
9 * Copyright (C) 2010-2012 Bojan Smojver <bojan@rexursive.com>
11 * This file is released under the GPLv2.
15 #include <linux/module.h>
16 #include <linux/file.h>
17 #include <linux/delay.h>
18 #include <linux/bitops.h>
19 #include <linux/genhd.h>
20 #include <linux/device.h>
21 #include <linux/bio.h>
22 #include <linux/blkdev.h>
23 #include <linux/swap.h>
24 #include <linux/swapops.h>
26 #include <linux/slab.h>
27 #include <linux/lzo.h>
28 #include <linux/vmalloc.h>
29 #include <linux/cpumask.h>
30 #include <linux/atomic.h>
31 #include <linux/kthread.h>
32 #include <linux/crc32.h>
33 #include <linux/ktime.h>
37 #define HIBERNATE_SIG "S1SUSPEND"
40 * When reading an {un,}compressed image, we may restore pages in place,
41 * in which case some architectures need these pages cleaning before they
42 * can be executed. We don't know which pages these may be, so clean the lot.
44 static bool clean_pages_on_read
;
45 static bool clean_pages_on_decompress
;
48 * The swap map is a data structure used for keeping track of each page
49 * written to a swap partition. It consists of many swap_map_page
50 * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
51 * These structures are stored on the swap and linked together with the
52 * help of the .next_swap member.
54 * The swap map is created during suspend. The swap map pages are
55 * allocated and populated one at a time, so we only need one memory
56 * page to set up the entire structure.
58 * During resume we pick up all swap_map_page structures into a list.
61 #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
64 * Number of free pages that are not high.
66 static inline unsigned long low_free_pages(void)
68 return nr_free_pages() - nr_free_highpages();
72 * Number of pages required to be kept free while writing the image. Always
73 * half of all available low pages before the writing starts.
75 static inline unsigned long reqd_free_pages(void)
77 return low_free_pages() / 2;
80 struct swap_map_page
{
81 sector_t entries
[MAP_PAGE_ENTRIES
];
85 struct swap_map_page_list
{
86 struct swap_map_page
*map
;
87 struct swap_map_page_list
*next
;
91 * The swap_map_handle structure is used for handling swap in
95 struct swap_map_handle
{
96 struct swap_map_page
*cur
;
97 struct swap_map_page_list
*maps
;
99 sector_t first_sector
;
101 unsigned long reqd_free_pages
;
105 struct swsusp_header
{
106 char reserved
[PAGE_SIZE
- 20 - sizeof(sector_t
) - sizeof(int) -
110 unsigned int flags
; /* Flags to pass to the "boot" kernel */
115 static struct swsusp_header
*swsusp_header
;
118 * The following functions are used for tracing the allocated
119 * swap pages, so that they can be freed in case of an error.
122 struct swsusp_extent
{
128 static struct rb_root swsusp_extents
= RB_ROOT
;
130 static int swsusp_extents_insert(unsigned long swap_offset
)
132 struct rb_node
**new = &(swsusp_extents
.rb_node
);
133 struct rb_node
*parent
= NULL
;
134 struct swsusp_extent
*ext
;
136 /* Figure out where to put the new node */
138 ext
= rb_entry(*new, struct swsusp_extent
, node
);
140 if (swap_offset
< ext
->start
) {
142 if (swap_offset
== ext
->start
- 1) {
146 new = &((*new)->rb_left
);
147 } else if (swap_offset
> ext
->end
) {
149 if (swap_offset
== ext
->end
+ 1) {
153 new = &((*new)->rb_right
);
155 /* It already is in the tree */
159 /* Add the new node and rebalance the tree. */
160 ext
= kzalloc(sizeof(struct swsusp_extent
), GFP_KERNEL
);
164 ext
->start
= swap_offset
;
165 ext
->end
= swap_offset
;
166 rb_link_node(&ext
->node
, parent
, new);
167 rb_insert_color(&ext
->node
, &swsusp_extents
);
172 * alloc_swapdev_block - allocate a swap page and register that it has
173 * been allocated, so that it can be freed in case of an error.
176 sector_t
alloc_swapdev_block(int swap
)
178 unsigned long offset
;
180 offset
= swp_offset(get_swap_page_of_type(swap
));
182 if (swsusp_extents_insert(offset
))
183 swap_free(swp_entry(swap
, offset
));
185 return swapdev_block(swap
, offset
);
191 * free_all_swap_pages - free swap pages allocated for saving image data.
192 * It also frees the extents used to register which swap entries had been
196 void free_all_swap_pages(int swap
)
198 struct rb_node
*node
;
200 while ((node
= swsusp_extents
.rb_node
)) {
201 struct swsusp_extent
*ext
;
202 unsigned long offset
;
204 ext
= container_of(node
, struct swsusp_extent
, node
);
205 rb_erase(node
, &swsusp_extents
);
206 for (offset
= ext
->start
; offset
<= ext
->end
; offset
++)
207 swap_free(swp_entry(swap
, offset
));
213 int swsusp_swap_in_use(void)
215 return (swsusp_extents
.rb_node
!= NULL
);
222 static unsigned short root_swap
= 0xffff;
223 static struct block_device
*hib_resume_bdev
;
225 struct hib_bio_batch
{
227 wait_queue_head_t wait
;
231 static void hib_init_batch(struct hib_bio_batch
*hb
)
233 atomic_set(&hb
->count
, 0);
234 init_waitqueue_head(&hb
->wait
);
238 static void hib_end_io(struct bio
*bio
)
240 struct hib_bio_batch
*hb
= bio
->bi_private
;
241 struct page
*page
= bio
->bi_io_vec
[0].bv_page
;
244 printk(KERN_ALERT
"Read-error on swap-device (%u:%u:%Lu)\n",
245 imajor(bio
->bi_bdev
->bd_inode
),
246 iminor(bio
->bi_bdev
->bd_inode
),
247 (unsigned long long)bio
->bi_iter
.bi_sector
);
250 if (bio_data_dir(bio
) == WRITE
)
252 else if (clean_pages_on_read
)
253 flush_icache_range((unsigned long)page_address(page
),
254 (unsigned long)page_address(page
) + PAGE_SIZE
);
256 if (bio
->bi_error
&& !hb
->error
)
257 hb
->error
= bio
->bi_error
;
258 if (atomic_dec_and_test(&hb
->count
))
264 static int hib_submit_io(int op
, int op_flags
, pgoff_t page_off
, void *addr
,
265 struct hib_bio_batch
*hb
)
267 struct page
*page
= virt_to_page(addr
);
271 bio
= bio_alloc(__GFP_RECLAIM
| __GFP_HIGH
, 1);
272 bio
->bi_iter
.bi_sector
= page_off
* (PAGE_SIZE
>> 9);
273 bio
->bi_bdev
= hib_resume_bdev
;
274 bio_set_op_attrs(bio
, op
, op_flags
);
276 if (bio_add_page(bio
, page
, PAGE_SIZE
, 0) < PAGE_SIZE
) {
277 printk(KERN_ERR
"PM: Adding page to bio failed at %llu\n",
278 (unsigned long long)bio
->bi_iter
.bi_sector
);
284 bio
->bi_end_io
= hib_end_io
;
285 bio
->bi_private
= hb
;
286 atomic_inc(&hb
->count
);
289 error
= submit_bio_wait(bio
);
296 static int hib_wait_io(struct hib_bio_batch
*hb
)
298 wait_event(hb
->wait
, atomic_read(&hb
->count
) == 0);
306 static int mark_swapfiles(struct swap_map_handle
*handle
, unsigned int flags
)
310 hib_submit_io(REQ_OP_READ
, READ_SYNC
, swsusp_resume_block
,
311 swsusp_header
, NULL
);
312 if (!memcmp("SWAP-SPACE",swsusp_header
->sig
, 10) ||
313 !memcmp("SWAPSPACE2",swsusp_header
->sig
, 10)) {
314 memcpy(swsusp_header
->orig_sig
,swsusp_header
->sig
, 10);
315 memcpy(swsusp_header
->sig
, HIBERNATE_SIG
, 10);
316 swsusp_header
->image
= handle
->first_sector
;
317 swsusp_header
->flags
= flags
;
318 if (flags
& SF_CRC32_MODE
)
319 swsusp_header
->crc32
= handle
->crc32
;
320 error
= hib_submit_io(REQ_OP_WRITE
, WRITE_SYNC
,
321 swsusp_resume_block
, swsusp_header
, NULL
);
323 printk(KERN_ERR
"PM: Swap header not found!\n");
330 * swsusp_swap_check - check if the resume device is a swap device
331 * and get its index (if so)
333 * This is called before saving image
335 static int swsusp_swap_check(void)
339 res
= swap_type_of(swsusp_resume_device
, swsusp_resume_block
,
345 res
= blkdev_get(hib_resume_bdev
, FMODE_WRITE
, NULL
);
349 res
= set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
351 blkdev_put(hib_resume_bdev
, FMODE_WRITE
);
354 * Update the resume device to the one actually used,
355 * so the test_resume mode can use it in case it is
356 * invoked from hibernate() to test the snapshot.
358 swsusp_resume_device
= hib_resume_bdev
->bd_dev
;
363 * write_page - Write one page to given swap location.
364 * @buf: Address we're writing.
365 * @offset: Offset of the swap page we're writing to.
366 * @hb: bio completion batch
369 static int write_page(void *buf
, sector_t offset
, struct hib_bio_batch
*hb
)
378 src
= (void *)__get_free_page(__GFP_RECLAIM
| __GFP_NOWARN
|
383 ret
= hib_wait_io(hb
); /* Free pages */
386 src
= (void *)__get_free_page(__GFP_RECLAIM
|
393 hb
= NULL
; /* Go synchronous */
400 return hib_submit_io(REQ_OP_WRITE
, WRITE_SYNC
, offset
, src
, hb
);
403 static void release_swap_writer(struct swap_map_handle
*handle
)
406 free_page((unsigned long)handle
->cur
);
410 static int get_swap_writer(struct swap_map_handle
*handle
)
414 ret
= swsusp_swap_check();
417 printk(KERN_ERR
"PM: Cannot find swap device, try "
421 handle
->cur
= (struct swap_map_page
*)get_zeroed_page(GFP_KERNEL
);
426 handle
->cur_swap
= alloc_swapdev_block(root_swap
);
427 if (!handle
->cur_swap
) {
432 handle
->reqd_free_pages
= reqd_free_pages();
433 handle
->first_sector
= handle
->cur_swap
;
436 release_swap_writer(handle
);
438 swsusp_close(FMODE_WRITE
);
442 static int swap_write_page(struct swap_map_handle
*handle
, void *buf
,
443 struct hib_bio_batch
*hb
)
450 offset
= alloc_swapdev_block(root_swap
);
451 error
= write_page(buf
, offset
, hb
);
454 handle
->cur
->entries
[handle
->k
++] = offset
;
455 if (handle
->k
>= MAP_PAGE_ENTRIES
) {
456 offset
= alloc_swapdev_block(root_swap
);
459 handle
->cur
->next_swap
= offset
;
460 error
= write_page(handle
->cur
, handle
->cur_swap
, hb
);
463 clear_page(handle
->cur
);
464 handle
->cur_swap
= offset
;
467 if (hb
&& low_free_pages() <= handle
->reqd_free_pages
) {
468 error
= hib_wait_io(hb
);
472 * Recalculate the number of required free pages, to
473 * make sure we never take more than half.
475 handle
->reqd_free_pages
= reqd_free_pages();
482 static int flush_swap_writer(struct swap_map_handle
*handle
)
484 if (handle
->cur
&& handle
->cur_swap
)
485 return write_page(handle
->cur
, handle
->cur_swap
, NULL
);
490 static int swap_writer_finish(struct swap_map_handle
*handle
,
491 unsigned int flags
, int error
)
494 flush_swap_writer(handle
);
495 printk(KERN_INFO
"PM: S");
496 error
= mark_swapfiles(handle
, flags
);
501 free_all_swap_pages(root_swap
);
502 release_swap_writer(handle
);
503 swsusp_close(FMODE_WRITE
);
508 /* We need to remember how much compressed data we need to read. */
509 #define LZO_HEADER sizeof(size_t)
511 /* Number of pages/bytes we'll compress at one time. */
512 #define LZO_UNC_PAGES 32
513 #define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE)
515 /* Number of pages/bytes we need for compressed data (worst case). */
516 #define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \
517 LZO_HEADER, PAGE_SIZE)
518 #define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE)
520 /* Maximum number of threads for compression/decompression. */
521 #define LZO_THREADS 3
523 /* Minimum/maximum number of pages for read buffering. */
524 #define LZO_MIN_RD_PAGES 1024
525 #define LZO_MAX_RD_PAGES 8192
529 * save_image - save the suspend image data
532 static int save_image(struct swap_map_handle
*handle
,
533 struct snapshot_handle
*snapshot
,
534 unsigned int nr_to_write
)
540 struct hib_bio_batch hb
;
546 printk(KERN_INFO
"PM: Saving image data pages (%u pages)...\n",
548 m
= nr_to_write
/ 10;
554 ret
= snapshot_read_next(snapshot
);
557 ret
= swap_write_page(handle
, data_of(*snapshot
), &hb
);
561 printk(KERN_INFO
"PM: Image saving progress: %3d%%\n",
565 err2
= hib_wait_io(&hb
);
570 printk(KERN_INFO
"PM: Image saving done.\n");
571 swsusp_show_speed(start
, stop
, nr_to_write
, "Wrote");
576 * Structure used for CRC32.
579 struct task_struct
*thr
; /* thread */
580 atomic_t ready
; /* ready to start flag */
581 atomic_t stop
; /* ready to stop flag */
582 unsigned run_threads
; /* nr current threads */
583 wait_queue_head_t go
; /* start crc update */
584 wait_queue_head_t done
; /* crc update done */
585 u32
*crc32
; /* points to handle's crc32 */
586 size_t *unc_len
[LZO_THREADS
]; /* uncompressed lengths */
587 unsigned char *unc
[LZO_THREADS
]; /* uncompressed data */
591 * CRC32 update function that runs in its own thread.
593 static int crc32_threadfn(void *data
)
595 struct crc_data
*d
= data
;
599 wait_event(d
->go
, atomic_read(&d
->ready
) ||
600 kthread_should_stop());
601 if (kthread_should_stop()) {
603 atomic_set(&d
->stop
, 1);
607 atomic_set(&d
->ready
, 0);
609 for (i
= 0; i
< d
->run_threads
; i
++)
610 *d
->crc32
= crc32_le(*d
->crc32
,
611 d
->unc
[i
], *d
->unc_len
[i
]);
612 atomic_set(&d
->stop
, 1);
618 * Structure used for LZO data compression.
621 struct task_struct
*thr
; /* thread */
622 atomic_t ready
; /* ready to start flag */
623 atomic_t stop
; /* ready to stop flag */
624 int ret
; /* return code */
625 wait_queue_head_t go
; /* start compression */
626 wait_queue_head_t done
; /* compression done */
627 size_t unc_len
; /* uncompressed length */
628 size_t cmp_len
; /* compressed length */
629 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
630 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
631 unsigned char wrk
[LZO1X_1_MEM_COMPRESS
]; /* compression workspace */
635 * Compression function that runs in its own thread.
637 static int lzo_compress_threadfn(void *data
)
639 struct cmp_data
*d
= data
;
642 wait_event(d
->go
, atomic_read(&d
->ready
) ||
643 kthread_should_stop());
644 if (kthread_should_stop()) {
647 atomic_set(&d
->stop
, 1);
651 atomic_set(&d
->ready
, 0);
653 d
->ret
= lzo1x_1_compress(d
->unc
, d
->unc_len
,
654 d
->cmp
+ LZO_HEADER
, &d
->cmp_len
,
656 atomic_set(&d
->stop
, 1);
663 * save_image_lzo - Save the suspend image data compressed with LZO.
664 * @handle: Swap map handle to use for saving the image.
665 * @snapshot: Image to read data from.
666 * @nr_to_write: Number of pages to save.
668 static int save_image_lzo(struct swap_map_handle
*handle
,
669 struct snapshot_handle
*snapshot
,
670 unsigned int nr_to_write
)
676 struct hib_bio_batch hb
;
680 unsigned thr
, run_threads
, nr_threads
;
681 unsigned char *page
= NULL
;
682 struct cmp_data
*data
= NULL
;
683 struct crc_data
*crc
= NULL
;
688 * We'll limit the number of threads for compression to limit memory
691 nr_threads
= num_online_cpus() - 1;
692 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
694 page
= (void *)__get_free_page(__GFP_RECLAIM
| __GFP_HIGH
);
696 printk(KERN_ERR
"PM: Failed to allocate LZO page\n");
701 data
= vmalloc(sizeof(*data
) * nr_threads
);
703 printk(KERN_ERR
"PM: Failed to allocate LZO data\n");
707 for (thr
= 0; thr
< nr_threads
; thr
++)
708 memset(&data
[thr
], 0, offsetof(struct cmp_data
, go
));
710 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
712 printk(KERN_ERR
"PM: Failed to allocate crc\n");
716 memset(crc
, 0, offsetof(struct crc_data
, go
));
719 * Start the compression threads.
721 for (thr
= 0; thr
< nr_threads
; thr
++) {
722 init_waitqueue_head(&data
[thr
].go
);
723 init_waitqueue_head(&data
[thr
].done
);
725 data
[thr
].thr
= kthread_run(lzo_compress_threadfn
,
727 "image_compress/%u", thr
);
728 if (IS_ERR(data
[thr
].thr
)) {
729 data
[thr
].thr
= NULL
;
731 "PM: Cannot start compression threads\n");
738 * Start the CRC32 thread.
740 init_waitqueue_head(&crc
->go
);
741 init_waitqueue_head(&crc
->done
);
744 crc
->crc32
= &handle
->crc32
;
745 for (thr
= 0; thr
< nr_threads
; thr
++) {
746 crc
->unc
[thr
] = data
[thr
].unc
;
747 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
750 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
751 if (IS_ERR(crc
->thr
)) {
753 printk(KERN_ERR
"PM: Cannot start CRC32 thread\n");
759 * Adjust the number of required free pages after all allocations have
760 * been done. We don't want to run out of pages when writing.
762 handle
->reqd_free_pages
= reqd_free_pages();
765 "PM: Using %u thread(s) for compression.\n"
766 "PM: Compressing and saving image data (%u pages)...\n",
767 nr_threads
, nr_to_write
);
768 m
= nr_to_write
/ 10;
774 for (thr
= 0; thr
< nr_threads
; thr
++) {
775 for (off
= 0; off
< LZO_UNC_SIZE
; off
+= PAGE_SIZE
) {
776 ret
= snapshot_read_next(snapshot
);
783 memcpy(data
[thr
].unc
+ off
,
784 data_of(*snapshot
), PAGE_SIZE
);
788 "PM: Image saving progress: "
796 data
[thr
].unc_len
= off
;
798 atomic_set(&data
[thr
].ready
, 1);
799 wake_up(&data
[thr
].go
);
805 crc
->run_threads
= thr
;
806 atomic_set(&crc
->ready
, 1);
809 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
810 wait_event(data
[thr
].done
,
811 atomic_read(&data
[thr
].stop
));
812 atomic_set(&data
[thr
].stop
, 0);
817 printk(KERN_ERR
"PM: LZO compression failed\n");
821 if (unlikely(!data
[thr
].cmp_len
||
823 lzo1x_worst_compress(data
[thr
].unc_len
))) {
825 "PM: Invalid LZO compressed length\n");
830 *(size_t *)data
[thr
].cmp
= data
[thr
].cmp_len
;
833 * Given we are writing one page at a time to disk, we
834 * copy that much from the buffer, although the last
835 * bit will likely be smaller than full page. This is
836 * OK - we saved the length of the compressed data, so
837 * any garbage at the end will be discarded when we
841 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
843 memcpy(page
, data
[thr
].cmp
+ off
, PAGE_SIZE
);
845 ret
= swap_write_page(handle
, page
, &hb
);
851 wait_event(crc
->done
, atomic_read(&crc
->stop
));
852 atomic_set(&crc
->stop
, 0);
856 err2
= hib_wait_io(&hb
);
861 printk(KERN_INFO
"PM: Image saving done.\n");
862 swsusp_show_speed(start
, stop
, nr_to_write
, "Wrote");
866 kthread_stop(crc
->thr
);
870 for (thr
= 0; thr
< nr_threads
; thr
++)
872 kthread_stop(data
[thr
].thr
);
875 if (page
) free_page((unsigned long)page
);
881 * enough_swap - Make sure we have enough swap to save the image.
883 * Returns TRUE or FALSE after checking the total amount of swap
884 * space avaiable from the resume partition.
887 static int enough_swap(unsigned int nr_pages
, unsigned int flags
)
889 unsigned int free_swap
= count_swap_pages(root_swap
, 1);
890 unsigned int required
;
892 pr_debug("PM: Free swap pages: %u\n", free_swap
);
894 required
= PAGES_FOR_IO
+ nr_pages
;
895 return free_swap
> required
;
899 * swsusp_write - Write entire image and metadata.
900 * @flags: flags to pass to the "boot" kernel in the image header
902 * It is important _NOT_ to umount filesystems at this point. We want
903 * them synced (in case something goes wrong) but we DO not want to mark
904 * filesystem clean: it is not. (And it does not matter, if we resume
905 * correctly, we'll mark system clean, anyway.)
908 int swsusp_write(unsigned int flags
)
910 struct swap_map_handle handle
;
911 struct snapshot_handle snapshot
;
912 struct swsusp_info
*header
;
916 pages
= snapshot_get_image_size();
917 error
= get_swap_writer(&handle
);
919 printk(KERN_ERR
"PM: Cannot get swap writer\n");
922 if (flags
& SF_NOCOMPRESS_MODE
) {
923 if (!enough_swap(pages
, flags
)) {
924 printk(KERN_ERR
"PM: Not enough free swap\n");
929 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
930 error
= snapshot_read_next(&snapshot
);
931 if (error
< PAGE_SIZE
) {
937 header
= (struct swsusp_info
*)data_of(snapshot
);
938 error
= swap_write_page(&handle
, header
, NULL
);
940 error
= (flags
& SF_NOCOMPRESS_MODE
) ?
941 save_image(&handle
, &snapshot
, pages
- 1) :
942 save_image_lzo(&handle
, &snapshot
, pages
- 1);
945 error
= swap_writer_finish(&handle
, flags
, error
);
950 * The following functions allow us to read data using a swap map
951 * in a file-alike way
954 static void release_swap_reader(struct swap_map_handle
*handle
)
956 struct swap_map_page_list
*tmp
;
958 while (handle
->maps
) {
959 if (handle
->maps
->map
)
960 free_page((unsigned long)handle
->maps
->map
);
962 handle
->maps
= handle
->maps
->next
;
968 static int get_swap_reader(struct swap_map_handle
*handle
,
969 unsigned int *flags_p
)
972 struct swap_map_page_list
*tmp
, *last
;
975 *flags_p
= swsusp_header
->flags
;
977 if (!swsusp_header
->image
) /* how can this happen? */
981 last
= handle
->maps
= NULL
;
982 offset
= swsusp_header
->image
;
984 tmp
= kmalloc(sizeof(*handle
->maps
), GFP_KERNEL
);
986 release_swap_reader(handle
);
989 memset(tmp
, 0, sizeof(*tmp
));
996 tmp
->map
= (struct swap_map_page
*)
997 __get_free_page(__GFP_RECLAIM
| __GFP_HIGH
);
999 release_swap_reader(handle
);
1003 error
= hib_submit_io(REQ_OP_READ
, READ_SYNC
, offset
,
1006 release_swap_reader(handle
);
1009 offset
= tmp
->map
->next_swap
;
1012 handle
->cur
= handle
->maps
->map
;
1016 static int swap_read_page(struct swap_map_handle
*handle
, void *buf
,
1017 struct hib_bio_batch
*hb
)
1021 struct swap_map_page_list
*tmp
;
1025 offset
= handle
->cur
->entries
[handle
->k
];
1028 error
= hib_submit_io(REQ_OP_READ
, READ_SYNC
, offset
, buf
, hb
);
1031 if (++handle
->k
>= MAP_PAGE_ENTRIES
) {
1033 free_page((unsigned long)handle
->maps
->map
);
1035 handle
->maps
= handle
->maps
->next
;
1038 release_swap_reader(handle
);
1040 handle
->cur
= handle
->maps
->map
;
1045 static int swap_reader_finish(struct swap_map_handle
*handle
)
1047 release_swap_reader(handle
);
1053 * load_image - load the image using the swap map handle
1054 * @handle and the snapshot handle @snapshot
1055 * (assume there are @nr_pages pages to load)
1058 static int load_image(struct swap_map_handle
*handle
,
1059 struct snapshot_handle
*snapshot
,
1060 unsigned int nr_to_read
)
1066 struct hib_bio_batch hb
;
1070 hib_init_batch(&hb
);
1072 clean_pages_on_read
= true;
1073 printk(KERN_INFO
"PM: Loading image data pages (%u pages)...\n",
1075 m
= nr_to_read
/ 10;
1079 start
= ktime_get();
1081 ret
= snapshot_write_next(snapshot
);
1084 ret
= swap_read_page(handle
, data_of(*snapshot
), &hb
);
1087 if (snapshot
->sync_read
)
1088 ret
= hib_wait_io(&hb
);
1091 if (!(nr_pages
% m
))
1092 printk(KERN_INFO
"PM: Image loading progress: %3d%%\n",
1096 err2
= hib_wait_io(&hb
);
1101 printk(KERN_INFO
"PM: Image loading done.\n");
1102 snapshot_write_finalize(snapshot
);
1103 if (!snapshot_image_loaded(snapshot
))
1106 swsusp_show_speed(start
, stop
, nr_to_read
, "Read");
1111 * Structure used for LZO data decompression.
1114 struct task_struct
*thr
; /* thread */
1115 atomic_t ready
; /* ready to start flag */
1116 atomic_t stop
; /* ready to stop flag */
1117 int ret
; /* return code */
1118 wait_queue_head_t go
; /* start decompression */
1119 wait_queue_head_t done
; /* decompression done */
1120 size_t unc_len
; /* uncompressed length */
1121 size_t cmp_len
; /* compressed length */
1122 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
1123 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
1127 * Deompression function that runs in its own thread.
1129 static int lzo_decompress_threadfn(void *data
)
1131 struct dec_data
*d
= data
;
1134 wait_event(d
->go
, atomic_read(&d
->ready
) ||
1135 kthread_should_stop());
1136 if (kthread_should_stop()) {
1139 atomic_set(&d
->stop
, 1);
1143 atomic_set(&d
->ready
, 0);
1145 d
->unc_len
= LZO_UNC_SIZE
;
1146 d
->ret
= lzo1x_decompress_safe(d
->cmp
+ LZO_HEADER
, d
->cmp_len
,
1147 d
->unc
, &d
->unc_len
);
1148 if (clean_pages_on_decompress
)
1149 flush_icache_range((unsigned long)d
->unc
,
1150 (unsigned long)d
->unc
+ d
->unc_len
);
1152 atomic_set(&d
->stop
, 1);
1159 * load_image_lzo - Load compressed image data and decompress them with LZO.
1160 * @handle: Swap map handle to use for loading data.
1161 * @snapshot: Image to copy uncompressed data into.
1162 * @nr_to_read: Number of pages to load.
1164 static int load_image_lzo(struct swap_map_handle
*handle
,
1165 struct snapshot_handle
*snapshot
,
1166 unsigned int nr_to_read
)
1171 struct hib_bio_batch hb
;
1176 unsigned i
, thr
, run_threads
, nr_threads
;
1177 unsigned ring
= 0, pg
= 0, ring_size
= 0,
1178 have
= 0, want
, need
, asked
= 0;
1179 unsigned long read_pages
= 0;
1180 unsigned char **page
= NULL
;
1181 struct dec_data
*data
= NULL
;
1182 struct crc_data
*crc
= NULL
;
1184 hib_init_batch(&hb
);
1187 * We'll limit the number of threads for decompression to limit memory
1190 nr_threads
= num_online_cpus() - 1;
1191 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
1193 page
= vmalloc(sizeof(*page
) * LZO_MAX_RD_PAGES
);
1195 printk(KERN_ERR
"PM: Failed to allocate LZO page\n");
1200 data
= vmalloc(sizeof(*data
) * nr_threads
);
1202 printk(KERN_ERR
"PM: Failed to allocate LZO data\n");
1206 for (thr
= 0; thr
< nr_threads
; thr
++)
1207 memset(&data
[thr
], 0, offsetof(struct dec_data
, go
));
1209 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
1211 printk(KERN_ERR
"PM: Failed to allocate crc\n");
1215 memset(crc
, 0, offsetof(struct crc_data
, go
));
1217 clean_pages_on_decompress
= true;
1220 * Start the decompression threads.
1222 for (thr
= 0; thr
< nr_threads
; thr
++) {
1223 init_waitqueue_head(&data
[thr
].go
);
1224 init_waitqueue_head(&data
[thr
].done
);
1226 data
[thr
].thr
= kthread_run(lzo_decompress_threadfn
,
1228 "image_decompress/%u", thr
);
1229 if (IS_ERR(data
[thr
].thr
)) {
1230 data
[thr
].thr
= NULL
;
1232 "PM: Cannot start decompression threads\n");
1239 * Start the CRC32 thread.
1241 init_waitqueue_head(&crc
->go
);
1242 init_waitqueue_head(&crc
->done
);
1245 crc
->crc32
= &handle
->crc32
;
1246 for (thr
= 0; thr
< nr_threads
; thr
++) {
1247 crc
->unc
[thr
] = data
[thr
].unc
;
1248 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
1251 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
1252 if (IS_ERR(crc
->thr
)) {
1254 printk(KERN_ERR
"PM: Cannot start CRC32 thread\n");
1260 * Set the number of pages for read buffering.
1261 * This is complete guesswork, because we'll only know the real
1262 * picture once prepare_image() is called, which is much later on
1263 * during the image load phase. We'll assume the worst case and
1264 * say that none of the image pages are from high memory.
1266 if (low_free_pages() > snapshot_get_image_size())
1267 read_pages
= (low_free_pages() - snapshot_get_image_size()) / 2;
1268 read_pages
= clamp_val(read_pages
, LZO_MIN_RD_PAGES
, LZO_MAX_RD_PAGES
);
1270 for (i
= 0; i
< read_pages
; i
++) {
1271 page
[i
] = (void *)__get_free_page(i
< LZO_CMP_PAGES
?
1272 __GFP_RECLAIM
| __GFP_HIGH
:
1273 __GFP_RECLAIM
| __GFP_NOWARN
|
1277 if (i
< LZO_CMP_PAGES
) {
1280 "PM: Failed to allocate LZO pages\n");
1288 want
= ring_size
= i
;
1291 "PM: Using %u thread(s) for decompression.\n"
1292 "PM: Loading and decompressing image data (%u pages)...\n",
1293 nr_threads
, nr_to_read
);
1294 m
= nr_to_read
/ 10;
1298 start
= ktime_get();
1300 ret
= snapshot_write_next(snapshot
);
1305 for (i
= 0; !eof
&& i
< want
; i
++) {
1306 ret
= swap_read_page(handle
, page
[ring
], &hb
);
1309 * On real read error, finish. On end of data,
1310 * set EOF flag and just exit the read loop.
1313 handle
->cur
->entries
[handle
->k
]) {
1320 if (++ring
>= ring_size
)
1327 * We are out of data, wait for some more.
1333 ret
= hib_wait_io(&hb
);
1342 if (crc
->run_threads
) {
1343 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1344 atomic_set(&crc
->stop
, 0);
1345 crc
->run_threads
= 0;
1348 for (thr
= 0; have
&& thr
< nr_threads
; thr
++) {
1349 data
[thr
].cmp_len
= *(size_t *)page
[pg
];
1350 if (unlikely(!data
[thr
].cmp_len
||
1352 lzo1x_worst_compress(LZO_UNC_SIZE
))) {
1354 "PM: Invalid LZO compressed length\n");
1359 need
= DIV_ROUND_UP(data
[thr
].cmp_len
+ LZO_HEADER
,
1370 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
1372 memcpy(data
[thr
].cmp
+ off
,
1373 page
[pg
], PAGE_SIZE
);
1376 if (++pg
>= ring_size
)
1380 atomic_set(&data
[thr
].ready
, 1);
1381 wake_up(&data
[thr
].go
);
1385 * Wait for more data while we are decompressing.
1387 if (have
< LZO_CMP_PAGES
&& asked
) {
1388 ret
= hib_wait_io(&hb
);
1397 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
1398 wait_event(data
[thr
].done
,
1399 atomic_read(&data
[thr
].stop
));
1400 atomic_set(&data
[thr
].stop
, 0);
1402 ret
= data
[thr
].ret
;
1406 "PM: LZO decompression failed\n");
1410 if (unlikely(!data
[thr
].unc_len
||
1411 data
[thr
].unc_len
> LZO_UNC_SIZE
||
1412 data
[thr
].unc_len
& (PAGE_SIZE
- 1))) {
1414 "PM: Invalid LZO uncompressed length\n");
1420 off
< data
[thr
].unc_len
; off
+= PAGE_SIZE
) {
1421 memcpy(data_of(*snapshot
),
1422 data
[thr
].unc
+ off
, PAGE_SIZE
);
1424 if (!(nr_pages
% m
))
1426 "PM: Image loading progress: "
1431 ret
= snapshot_write_next(snapshot
);
1433 crc
->run_threads
= thr
+ 1;
1434 atomic_set(&crc
->ready
, 1);
1441 crc
->run_threads
= thr
;
1442 atomic_set(&crc
->ready
, 1);
1447 if (crc
->run_threads
) {
1448 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1449 atomic_set(&crc
->stop
, 0);
1453 printk(KERN_INFO
"PM: Image loading done.\n");
1454 snapshot_write_finalize(snapshot
);
1455 if (!snapshot_image_loaded(snapshot
))
1458 if (swsusp_header
->flags
& SF_CRC32_MODE
) {
1459 if(handle
->crc32
!= swsusp_header
->crc32
) {
1461 "PM: Invalid image CRC32!\n");
1467 swsusp_show_speed(start
, stop
, nr_to_read
, "Read");
1469 for (i
= 0; i
< ring_size
; i
++)
1470 free_page((unsigned long)page
[i
]);
1473 kthread_stop(crc
->thr
);
1477 for (thr
= 0; thr
< nr_threads
; thr
++)
1479 kthread_stop(data
[thr
].thr
);
1488 * swsusp_read - read the hibernation image.
1489 * @flags_p: flags passed by the "frozen" kernel in the image header should
1490 * be written into this memory location
1493 int swsusp_read(unsigned int *flags_p
)
1496 struct swap_map_handle handle
;
1497 struct snapshot_handle snapshot
;
1498 struct swsusp_info
*header
;
1500 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
1501 error
= snapshot_write_next(&snapshot
);
1502 if (error
< PAGE_SIZE
)
1503 return error
< 0 ? error
: -EFAULT
;
1504 header
= (struct swsusp_info
*)data_of(snapshot
);
1505 error
= get_swap_reader(&handle
, flags_p
);
1509 error
= swap_read_page(&handle
, header
, NULL
);
1511 error
= (*flags_p
& SF_NOCOMPRESS_MODE
) ?
1512 load_image(&handle
, &snapshot
, header
->pages
- 1) :
1513 load_image_lzo(&handle
, &snapshot
, header
->pages
- 1);
1515 swap_reader_finish(&handle
);
1518 pr_debug("PM: Image successfully loaded\n");
1520 pr_debug("PM: Error %d resuming\n", error
);
1525 * swsusp_check - Check for swsusp signature in the resume device
1528 int swsusp_check(void)
1532 hib_resume_bdev
= blkdev_get_by_dev(swsusp_resume_device
,
1534 if (!IS_ERR(hib_resume_bdev
)) {
1535 set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
1536 clear_page(swsusp_header
);
1537 error
= hib_submit_io(REQ_OP_READ
, READ_SYNC
,
1538 swsusp_resume_block
,
1539 swsusp_header
, NULL
);
1543 if (!memcmp(HIBERNATE_SIG
, swsusp_header
->sig
, 10)) {
1544 memcpy(swsusp_header
->sig
, swsusp_header
->orig_sig
, 10);
1545 /* Reset swap signature now */
1546 error
= hib_submit_io(REQ_OP_WRITE
, WRITE_SYNC
,
1547 swsusp_resume_block
,
1548 swsusp_header
, NULL
);
1555 blkdev_put(hib_resume_bdev
, FMODE_READ
);
1557 pr_debug("PM: Image signature found, resuming\n");
1559 error
= PTR_ERR(hib_resume_bdev
);
1563 pr_debug("PM: Image not found (code %d)\n", error
);
1569 * swsusp_close - close swap device.
1572 void swsusp_close(fmode_t mode
)
1574 if (IS_ERR(hib_resume_bdev
)) {
1575 pr_debug("PM: Image device not initialised\n");
1579 blkdev_put(hib_resume_bdev
, mode
);
1583 * swsusp_unmark - Unmark swsusp signature in the resume device
1586 #ifdef CONFIG_SUSPEND
1587 int swsusp_unmark(void)
1591 hib_submit_io(REQ_OP_READ
, READ_SYNC
, swsusp_resume_block
,
1592 swsusp_header
, NULL
);
1593 if (!memcmp(HIBERNATE_SIG
,swsusp_header
->sig
, 10)) {
1594 memcpy(swsusp_header
->sig
,swsusp_header
->orig_sig
, 10);
1595 error
= hib_submit_io(REQ_OP_WRITE
, WRITE_SYNC
,
1596 swsusp_resume_block
,
1597 swsusp_header
, NULL
);
1599 printk(KERN_ERR
"PM: Cannot find swsusp signature!\n");
1604 * We just returned from suspend, we don't need the image any more.
1606 free_all_swap_pages(root_swap
);
1612 static int swsusp_header_init(void)
1614 swsusp_header
= (struct swsusp_header
*) __get_free_page(GFP_KERNEL
);
1616 panic("Could not allocate memory for swsusp_header\n");
1620 core_initcall(swsusp_header_init
);