drivers/i2c/busses/i2c-axxia.c

   1 /*
   2  * This driver implements I2C master functionality using the LSI API2C
   3  * controller.
   4  *
   5  * NOTE: The controller has a limitation in that it can only do transfers of
   6  * maximum 255 bytes at a time. If a larger transfer is attempted, error code
   7  * (-EINVAL) is returned.
   8  *
   9  * This software is licensed under the terms of the GNU General Public
  10  * License version 2, as published by the Free Software Foundation, and
  11  * may be copied, distributed, and modified under those terms.
  12  */
  13 #include <linux/clk.h>
  14 #include <linux/clkdev.h>
  15 #include <linux/err.h>
  16 #include <linux/i2c.h>
  17 #include <linux/init.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/module.h>
  20 #include <linux/io.h>
  21 #include <linux/kernel.h>
  22 #include <linux/platform_device.h>
  23
  24 #define SCL_WAIT_TIMEOUT_NS 25000000
  25 #define I2C_XFER_TIMEOUT    (msecs_to_jiffies(250))
  26 #define I2C_STOP_TIMEOUT    (msecs_to_jiffies(100))
  27 #define FIFO_SIZE           8
  28
  29 #define GLOBAL_CONTROL          0x00
  30 #define   GLOBAL_MST_EN         BIT(0)
  31 #define   GLOBAL_SLV_EN         BIT(1)
  32 #define   GLOBAL_IBML_EN        BIT(2)
  33 #define INTERRUPT_STATUS        0x04
  34 #define INTERRUPT_ENABLE        0x08
  35 #define   INT_SLV               BIT(1)
  36 #define   INT_MST               BIT(0)
  37 #define WAIT_TIMER_CONTROL      0x0c
  38 #define   WT_EN                 BIT(15)
  39 #define   WT_VALUE(_x)          ((_x) & 0x7fff)
  40 #define IBML_TIMEOUT            0x10
  41 #define IBML_LOW_MEXT           0x14
  42 #define IBML_LOW_SEXT           0x18
  43 #define TIMER_CLOCK_DIV         0x1c
  44 #define I2C_BUS_MONITOR         0x20
  45 #define   BM_SDAC               BIT(3)
  46 #define   BM_SCLC               BIT(2)
  47 #define   BM_SDAS               BIT(1)
  48 #define   BM_SCLS               BIT(0)
  49 #define SOFT_RESET              0x24
  50 #define MST_COMMAND             0x28
  51 #define   CMD_BUSY              (1<<3)
  52 #define   CMD_MANUAL            (0x00 | CMD_BUSY)
  53 #define   CMD_AUTO              (0x01 | CMD_BUSY)
  54 #define MST_RX_XFER             0x2c
  55 #define MST_TX_XFER             0x30
  56 #define MST_ADDR_1              0x34
  57 #define MST_ADDR_2              0x38
  58 #define MST_DATA                0x3c
  59 #define MST_TX_FIFO             0x40
  60 #define MST_RX_FIFO             0x44
  61 #define MST_INT_ENABLE          0x48
  62 #define MST_INT_STATUS          0x4c
  63 #define   MST_STATUS_RFL        (1 << 13) /* RX FIFO serivce */
  64 #define   MST_STATUS_TFL        (1 << 12) /* TX FIFO service */
  65 #define   MST_STATUS_SNS        (1 << 11) /* Manual mode done */
  66 #define   MST_STATUS_SS         (1 << 10) /* Automatic mode done */
  67 #define   MST_STATUS_SCC        (1 << 9)  /* Stop complete */
  68 #define   MST_STATUS_IP         (1 << 8)  /* Invalid parameter */
  69 #define   MST_STATUS_TSS        (1 << 7)  /* Timeout */
  70 #define   MST_STATUS_AL         (1 << 6)  /* Arbitration lost */
  71 #define   MST_STATUS_ND         (1 << 5)  /* NAK on data phase */
  72 #define   MST_STATUS_NA         (1 << 4)  /* NAK on address phase */
  73 #define   MST_STATUS_NAK        (MST_STATUS_NA | \
  74                                  MST_STATUS_ND)
  75 #define   MST_STATUS_ERR        (MST_STATUS_NAK | \
  76                                  MST_STATUS_AL  | \
  77                                  MST_STATUS_IP  | \
  78                                  MST_STATUS_TSS)
  79 #define MST_TX_BYTES_XFRD       0x50
  80 #define MST_RX_BYTES_XFRD       0x54
  81 #define SCL_HIGH_PERIOD         0x80
  82 #define SCL_LOW_PERIOD          0x84
  83 #define SPIKE_FLTR_LEN          0x88
  84 #define SDA_SETUP_TIME          0x8c
  85 #define SDA_HOLD_TIME           0x90
  86
  87 /**
  88  * axxia_i2c_dev - I2C device context
  89  * @base: pointer to register struct
  90  * @msg: pointer to current message
  91  * @msg_xfrd: number of bytes transferred in msg
  92  * @msg_err: error code for completed message
  93  * @msg_complete: xfer completion object
  94  * @dev: device reference
  95  * @adapter: core i2c abstraction
  96  * @i2c_clk: clock reference for i2c input clock
  97  * @bus_clk_rate: current i2c bus clock rate
  98  */
  99 struct axxia_i2c_dev {
 100         void __iomem *base;
 101         struct i2c_msg *msg;
 102         size_t msg_xfrd;
 103         int msg_err;
 104         struct completion msg_complete;
 105         struct device *dev;
 106         struct i2c_adapter adapter;
 107         struct clk *i2c_clk;
 108         u32 bus_clk_rate;
 109 };
 110
 111 static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask)
 112 {
 113         u32 int_en;
 114
 115         int_en = readl(idev->base + MST_INT_ENABLE);
 116         writel(int_en & ~mask, idev->base + MST_INT_ENABLE);
 117 }
 118
 119 static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
 120 {
 121         u32 int_en;
 122
 123         int_en = readl(idev->base + MST_INT_ENABLE);
 124         writel(int_en | mask, idev->base + MST_INT_ENABLE);
 125 }
 126
 127 /**
 128  * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
 129  */
 130 static u32 ns_to_clk(u64 ns, u32 clk_mhz)
 131 {
 132         return div_u64(ns * clk_mhz, 1000);
 133 }
 134
 135 static int axxia_i2c_init(struct axxia_i2c_dev *idev)
 136 {
 137         u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
 138         u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
 139         u32 t_setup;
 140         u32 t_high, t_low;
 141         u32 tmo_clk;
 142         u32 prescale;
 143         unsigned long timeout;
 144
 145         dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
 146                 idev->bus_clk_rate, clk_mhz, divisor);
 147
 148         /* Reset controller */
 149         writel(0x01, idev->base + SOFT_RESET);
 150         timeout = jiffies + msecs_to_jiffies(100);
 151         while (readl(idev->base + SOFT_RESET) & 1) {
 152                 if (time_after(jiffies, timeout)) {
 153                         dev_warn(idev->dev, "Soft reset failed\n");
 154                         break;
 155                 }
 156         }
 157
 158         /* Enable Master Mode */
 159         writel(0x1, idev->base + GLOBAL_CONTROL);
 160
 161         if (idev->bus_clk_rate <= 100000) {
 162                 /* Standard mode SCL 50/50, tSU:DAT = 250 ns */
 163                 t_high = divisor * 1 / 2;
 164                 t_low = divisor * 1 / 2;
 165                 t_setup = ns_to_clk(250, clk_mhz);
 166         } else {
 167                 /* Fast mode SCL 33/66, tSU:DAT = 100 ns */
 168                 t_high = divisor * 1 / 3;
 169                 t_low = divisor * 2 / 3;
 170                 t_setup = ns_to_clk(100, clk_mhz);
 171         }
 172
 173         /* SCL High Time */
 174         writel(t_high, idev->base + SCL_HIGH_PERIOD);
 175         /* SCL Low Time */
 176         writel(t_low, idev->base + SCL_LOW_PERIOD);
 177         /* SDA Setup Time */
 178         writel(t_setup, idev->base + SDA_SETUP_TIME);
 179         /* SDA Hold Time, 300ns */
 180         writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME);
 181         /* Filter <50ns spikes */
 182         writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN);
 183
 184         /* Configure Time-Out Registers */
 185         tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz);
 186
 187         /* Find prescaler value that makes tmo_clk fit in 15-bits counter. */
 188         for (prescale = 0; prescale < 15; ++prescale) {
 189                 if (tmo_clk <= 0x7fff)
 190                         break;
 191                 tmo_clk >>= 1;
 192         }
 193         if (tmo_clk > 0x7fff)
 194                 tmo_clk = 0x7fff;
 195
 196         /* Prescale divider (log2) */
 197         writel(prescale, idev->base + TIMER_CLOCK_DIV);
 198         /* Timeout in divided clocks */
 199         writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL);
 200
 201         /* Mask all master interrupt bits */
 202         i2c_int_disable(idev, ~0);
 203
 204         /* Interrupt enable */
 205         writel(0x01, idev->base + INTERRUPT_ENABLE);
 206
 207         return 0;
 208 }
 209
 210 static int i2c_m_rd(const struct i2c_msg *msg)
 211 {
 212         return (msg->flags & I2C_M_RD) != 0;
 213 }
 214
 215 static int i2c_m_ten(const struct i2c_msg *msg)
 216 {
 217         return (msg->flags & I2C_M_TEN) != 0;
 218 }
 219
 220 static int i2c_m_recv_len(const struct i2c_msg *msg)
 221 {
 222         return (msg->flags & I2C_M_RECV_LEN) != 0;
 223 }
 224
 225 /**
 226  * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
 227  * transfer length if this is the first byte of such a transfer.
 228  */
 229 static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
 230 {
 231         struct i2c_msg *msg = idev->msg;
 232         size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO);
 233         int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd);
 234
 235         while (bytes_to_transfer-- > 0) {
 236                 int c = readl(idev->base + MST_DATA);
 237
 238                 if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) {
 239                         /*
 240                          * Check length byte for SMBus block read
 241                          */
 242                         if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
 243                                 idev->msg_err = -EPROTO;
 244                                 i2c_int_disable(idev, ~0);
 245                                 complete(&idev->msg_complete);
 246                                 break;
 247                         }
 248                         msg->len = 1 + c;
 249                         writel(msg->len, idev->base + MST_RX_XFER);
 250                 }
 251                 msg->buf[idev->msg_xfrd++] = c;
 252         }
 253
 254         return 0;
 255 }
 256
 257 /**
 258  * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
 259  * @return: Number of bytes left to transfer.
 260  */
 261 static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
 262 {
 263         struct i2c_msg *msg = idev->msg;
 264         size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO);
 265         int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd);
 266         int ret = msg->len - idev->msg_xfrd - bytes_to_transfer;
 267
 268         while (bytes_to_transfer-- > 0)
 269                 writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA);
 270
 271         return ret;
 272 }
 273
 274 static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
 275 {
 276         struct axxia_i2c_dev *idev = _dev;
 277         u32 status;
 278
 279         if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST))
 280                 return IRQ_NONE;
 281
 282         /* Read interrupt status bits */
 283         status = readl(idev->base + MST_INT_STATUS);
 284
 285         if (!idev->msg) {
 286                 dev_warn(idev->dev, "unexpected interrupt\n");
 287                 goto out;
 288         }
 289
 290         /* RX FIFO needs service? */
 291         if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
 292                 axxia_i2c_empty_rx_fifo(idev);
 293
 294         /* TX FIFO needs service? */
 295         if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
 296                 if (axxia_i2c_fill_tx_fifo(idev) == 0)
 297                         i2c_int_disable(idev, MST_STATUS_TFL);
 298         }
 299
 300         if (status & MST_STATUS_SCC) {
 301                 /* Stop completed */
 302                 i2c_int_disable(idev, ~0);
 303                 complete(&idev->msg_complete);
 304         } else if (status & MST_STATUS_SNS) {
 305                 /* Transfer done */
 306                 i2c_int_disable(idev, ~0);
 307                 if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
 308                         axxia_i2c_empty_rx_fifo(idev);
 309                 complete(&idev->msg_complete);
 310         } else if (unlikely(status & MST_STATUS_ERR)) {
 311                 /* Transfer error */
 312                 i2c_int_disable(idev, ~0);
 313                 if (status & MST_STATUS_AL)
 314                         idev->msg_err = -EAGAIN;
 315                 else if (status & MST_STATUS_NAK)
 316                         idev->msg_err = -ENXIO;
 317                 else
 318                         idev->msg_err = -EIO;
 319                 dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n",
 320                         status,
 321                         idev->msg->addr,
 322                         readl(idev->base + MST_RX_BYTES_XFRD),
 323                         readl(idev->base + MST_RX_XFER),
 324                         readl(idev->base + MST_TX_BYTES_XFRD),
 325                         readl(idev->base + MST_TX_XFER));
 326                 complete(&idev->msg_complete);
 327         }
 328
 329 out:
 330         /* Clear interrupt */
 331         writel(INT_MST, idev->base + INTERRUPT_STATUS);
 332
 333         return IRQ_HANDLED;
 334 }
 335
 336 static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 337 {
 338         u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
 339         u32 rx_xfer, tx_xfer;
 340         u32 addr_1, addr_2;
 341         unsigned long time_left;
 342
 343         idev->msg = msg;
 344         idev->msg_xfrd = 0;
 345         idev->msg_err = 0;
 346         reinit_completion(&idev->msg_complete);
 347
 348         if (i2c_m_ten(msg)) {
 349                 /* 10-bit address
 350                  *   addr_1: 5'b11110 | addr[9:8] | (R/nW)
 351                  *   addr_2: addr[7:0]
 352                  */
 353                 addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
 354                 addr_2 = msg->addr & 0xFF;
 355         } else {
 356                 /* 7-bit address
 357                  *   addr_1: addr[6:0] | (R/nW)
 358                  *   addr_2: dont care
 359                  */
 360                 addr_1 = (msg->addr << 1) & 0xFF;
 361                 addr_2 = 0;
 362         }
 363
 364         if (i2c_m_rd(msg)) {
 365                 /* I2C read transfer */
 366                 rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
 367                 tx_xfer = 0;
 368                 addr_1 |= 1;    /* Set the R/nW bit of the address */
 369         } else {
 370                 /* I2C write transfer */
 371                 rx_xfer = 0;
 372                 tx_xfer = msg->len;
 373         }
 374
 375         writel(rx_xfer, idev->base + MST_RX_XFER);
 376         writel(tx_xfer, idev->base + MST_TX_XFER);
 377         writel(addr_1, idev->base + MST_ADDR_1);
 378         writel(addr_2, idev->base + MST_ADDR_2);
 379
 380         if (i2c_m_rd(msg))
 381                 int_mask |= MST_STATUS_RFL;
 382         else if (axxia_i2c_fill_tx_fifo(idev) != 0)
 383                 int_mask |= MST_STATUS_TFL;
 384
 385         /* Start manual mode */
 386         writel(CMD_MANUAL, idev->base + MST_COMMAND);
 387
 388         i2c_int_enable(idev, int_mask);
 389
 390         time_left = wait_for_completion_timeout(&idev->msg_complete,
 391                                               I2C_XFER_TIMEOUT);
 392
 393         i2c_int_disable(idev, int_mask);
 394
 395         if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
 396                 dev_warn(idev->dev, "busy after xfer\n");
 397
 398         if (time_left == 0)
 399                 idev->msg_err = -ETIMEDOUT;
 400
 401         if (idev->msg_err == -ETIMEDOUT)
 402                 i2c_recover_bus(&idev->adapter);
 403
 404         if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
 405                 axxia_i2c_init(idev);
 406
 407         return idev->msg_err;
 408 }
 409
 410 static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
 411 {
 412         u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
 413         unsigned long time_left;
 414
 415         reinit_completion(&idev->msg_complete);
 416
 417         /* Issue stop */
 418         writel(0xb, idev->base + MST_COMMAND);
 419         i2c_int_enable(idev, int_mask);
 420         time_left = wait_for_completion_timeout(&idev->msg_complete,
 421                                               I2C_STOP_TIMEOUT);
 422         i2c_int_disable(idev, int_mask);
 423         if (time_left == 0)
 424                 return -ETIMEDOUT;
 425
 426         if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
 427                 dev_warn(idev->dev, "busy after stop\n");
 428
 429         return 0;
 430 }
 431
 432 static int
 433 axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 434 {
 435         struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
 436         int i;
 437         int ret = 0;
 438
 439         for (i = 0; ret == 0 && i < num; ++i)
 440                 ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
 441
 442         axxia_i2c_stop(idev);
 443
 444         return ret ? : i;
 445 }
 446
 447 static int axxia_i2c_get_scl(struct i2c_adapter *adap)
 448 {
 449         struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
 450
 451         return !!(readl(idev->base + I2C_BUS_MONITOR) & BM_SCLS);
 452 }
 453
 454 static void axxia_i2c_set_scl(struct i2c_adapter *adap, int val)
 455 {
 456         struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
 457         u32 tmp;
 458
 459         /* Preserve SDA Control */
 460         tmp = readl(idev->base + I2C_BUS_MONITOR) & BM_SDAC;
 461         if (!val)
 462                 tmp |= BM_SCLC;
 463         writel(tmp, idev->base + I2C_BUS_MONITOR);
 464 }
 465
 466 static int axxia_i2c_get_sda(struct i2c_adapter *adap)
 467 {
 468         struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
 469
 470         return !!(readl(idev->base + I2C_BUS_MONITOR) & BM_SDAS);
 471 }
 472
 473 static struct i2c_bus_recovery_info axxia_i2c_recovery_info = {
 474         .recover_bus = i2c_generic_scl_recovery,
 475         .get_scl = axxia_i2c_get_scl,
 476         .set_scl = axxia_i2c_set_scl,
 477         .get_sda = axxia_i2c_get_sda,
 478 };
 479
 480 static u32 axxia_i2c_func(struct i2c_adapter *adap)
 481 {
 482         u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
 483                     I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA);
 484         return caps;
 485 }
 486
 487 static const struct i2c_algorithm axxia_i2c_algo = {
 488         .master_xfer = axxia_i2c_xfer,
 489         .functionality = axxia_i2c_func,
 490 };
 491
 492 static struct i2c_adapter_quirks axxia_i2c_quirks = {
 493         .max_read_len = 255,
 494         .max_write_len = 255,
 495 };
 496
 497 static int axxia_i2c_probe(struct platform_device *pdev)
 498 {
 499         struct device_node *np = pdev->dev.of_node;
 500         struct axxia_i2c_dev *idev = NULL;
 501         struct resource *res;
 502         void __iomem *base;
 503         int irq;
 504         int ret = 0;
 505
 506         idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 507         if (!idev)
 508                 return -ENOMEM;
 509
 510         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 511         base = devm_ioremap_resource(&pdev->dev, res);
 512         if (IS_ERR(base))
 513                 return PTR_ERR(base);
 514
 515         irq = platform_get_irq(pdev, 0);
 516         if (irq < 0) {
 517                 dev_err(&pdev->dev, "missing interrupt resource\n");
 518                 return irq;
 519         }
 520
 521         idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
 522         if (IS_ERR(idev->i2c_clk)) {
 523                 dev_err(&pdev->dev, "missing clock\n");
 524                 return PTR_ERR(idev->i2c_clk);
 525         }
 526
 527         idev->base = base;
 528         idev->dev = &pdev->dev;
 529         init_completion(&idev->msg_complete);
 530
 531         of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
 532         if (idev->bus_clk_rate == 0)
 533                 idev->bus_clk_rate = 100000;    /* default clock rate */
 534
 535         ret = axxia_i2c_init(idev);
 536         if (ret) {
 537                 dev_err(&pdev->dev, "failed to initialize\n");
 538                 return ret;
 539         }
 540
 541         ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
 542                                pdev->name, idev);
 543         if (ret) {
 544                 dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
 545                 return ret;
 546         }
 547
 548         clk_prepare_enable(idev->i2c_clk);
 549
 550         i2c_set_adapdata(&idev->adapter, idev);
 551         strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
 552         idev->adapter.owner = THIS_MODULE;
 553         idev->adapter.algo = &axxia_i2c_algo;
 554         idev->adapter.bus_recovery_info = &axxia_i2c_recovery_info;
 555         idev->adapter.quirks = &axxia_i2c_quirks;
 556         idev->adapter.dev.parent = &pdev->dev;
 557         idev->adapter.dev.of_node = pdev->dev.of_node;
 558
 559         platform_set_drvdata(pdev, idev);
 560
 561         ret = i2c_add_adapter(&idev->adapter);
 562         if (ret) {
 563                 dev_err(&pdev->dev, "failed to add adapter\n");
 564                 return ret;
 565         }
 566
 567         return 0;
 568 }
 569
 570 static int axxia_i2c_remove(struct platform_device *pdev)
 571 {
 572         struct axxia_i2c_dev *idev = platform_get_drvdata(pdev);
 573
 574         clk_disable_unprepare(idev->i2c_clk);
 575         i2c_del_adapter(&idev->adapter);
 576
 577         return 0;
 578 }
 579
 580 /* Match table for of_platform binding */
 581 static const struct of_device_id axxia_i2c_of_match[] = {
 582         { .compatible = "lsi,api2c", },
 583         {},
 584 };
 585
 586 MODULE_DEVICE_TABLE(of, axxia_i2c_of_match);
 587
 588 static struct platform_driver axxia_i2c_driver = {
 589         .probe = axxia_i2c_probe,
 590         .remove = axxia_i2c_remove,
 591         .driver = {
 592                 .name = "axxia-i2c",
 593                 .of_match_table = axxia_i2c_of_match,
 594         },
 595 };
 596
 597 module_platform_driver(axxia_i2c_driver);
 598
 599 MODULE_DESCRIPTION("Axxia I2C Bus driver");
 600 MODULE_AUTHOR("Anders Berg <anders.berg@lsi.com>");
 601 MODULE_LICENSE("GPL v2");