2 * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
15 #include <linux/clk.h>
16 #include <linux/i2c.h>
17 #include <linux/interrupt.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
22 #define UNIPHIER_I2C_DTRM 0x00 /* TX register */
23 #define UNIPHIER_I2C_DTRM_IRQEN BIT(11) /* enable interrupt */
24 #define UNIPHIER_I2C_DTRM_STA BIT(10) /* start condition */
25 #define UNIPHIER_I2C_DTRM_STO BIT(9) /* stop condition */
26 #define UNIPHIER_I2C_DTRM_NACK BIT(8) /* do not return ACK */
27 #define UNIPHIER_I2C_DTRM_RD BIT(0) /* read transaction */
28 #define UNIPHIER_I2C_DREC 0x04 /* RX register */
29 #define UNIPHIER_I2C_DREC_MST BIT(14) /* 1 = master, 0 = slave */
30 #define UNIPHIER_I2C_DREC_TX BIT(13) /* 1 = transmit, 0 = receive */
31 #define UNIPHIER_I2C_DREC_STS BIT(12) /* stop condition detected */
32 #define UNIPHIER_I2C_DREC_LRB BIT(11) /* no ACK */
33 #define UNIPHIER_I2C_DREC_LAB BIT(9) /* arbitration lost */
34 #define UNIPHIER_I2C_DREC_BBN BIT(8) /* bus not busy */
35 #define UNIPHIER_I2C_MYAD 0x08 /* slave address */
36 #define UNIPHIER_I2C_CLK 0x0c /* clock frequency control */
37 #define UNIPHIER_I2C_BRST 0x10 /* bus reset */
38 #define UNIPHIER_I2C_BRST_FOEN BIT(1) /* normal operation */
39 #define UNIPHIER_I2C_BRST_RSCL BIT(0) /* release SCL */
40 #define UNIPHIER_I2C_HOLD 0x14 /* hold time control */
41 #define UNIPHIER_I2C_BSTS 0x18 /* bus status monitor */
42 #define UNIPHIER_I2C_BSTS_SDA BIT(1) /* readback of SDA line */
43 #define UNIPHIER_I2C_BSTS_SCL BIT(0) /* readback of SCL line */
44 #define UNIPHIER_I2C_NOISE 0x1c /* noise filter control */
45 #define UNIPHIER_I2C_SETUP 0x20 /* setup time control */
47 #define UNIPHIER_I2C_DEFAULT_SPEED 100000
48 #define UNIPHIER_I2C_MAX_SPEED 400000
50 struct uniphier_i2c_priv
{
51 struct completion comp
;
52 struct i2c_adapter adap
;
53 void __iomem
*membase
;
55 unsigned int busy_cnt
;
58 static irqreturn_t
uniphier_i2c_interrupt(int irq
, void *dev_id
)
60 struct uniphier_i2c_priv
*priv
= dev_id
;
63 * This hardware uses edge triggered interrupt. Do not touch the
64 * hardware registers in this handler to make sure to catch the next
65 * interrupt edge. Just send a complete signal and return.
67 complete(&priv
->comp
);
72 static int uniphier_i2c_xfer_byte(struct i2c_adapter
*adap
, u32 txdata
,
75 struct uniphier_i2c_priv
*priv
= i2c_get_adapdata(adap
);
76 unsigned long time_left
;
79 reinit_completion(&priv
->comp
);
81 txdata
|= UNIPHIER_I2C_DTRM_IRQEN
;
82 dev_dbg(&adap
->dev
, "write data: 0x%04x\n", txdata
);
83 writel(txdata
, priv
->membase
+ UNIPHIER_I2C_DTRM
);
85 time_left
= wait_for_completion_timeout(&priv
->comp
, adap
->timeout
);
86 if (unlikely(!time_left
)) {
87 dev_err(&adap
->dev
, "transaction timeout\n");
91 rxdata
= readl(priv
->membase
+ UNIPHIER_I2C_DREC
);
92 dev_dbg(&adap
->dev
, "read data: 0x%04x\n", rxdata
);
100 static int uniphier_i2c_send_byte(struct i2c_adapter
*adap
, u32 txdata
)
105 ret
= uniphier_i2c_xfer_byte(adap
, txdata
, &rxdata
);
109 if (unlikely(rxdata
& UNIPHIER_I2C_DREC_LAB
)) {
110 dev_dbg(&adap
->dev
, "arbitration lost\n");
113 if (unlikely(rxdata
& UNIPHIER_I2C_DREC_LRB
)) {
114 dev_dbg(&adap
->dev
, "could not get ACK\n");
121 static int uniphier_i2c_tx(struct i2c_adapter
*adap
, u16 addr
, u16 len
,
126 dev_dbg(&adap
->dev
, "start condition\n");
127 ret
= uniphier_i2c_send_byte(adap
, addr
<< 1 |
128 UNIPHIER_I2C_DTRM_STA
|
129 UNIPHIER_I2C_DTRM_NACK
);
134 ret
= uniphier_i2c_send_byte(adap
,
135 UNIPHIER_I2C_DTRM_NACK
| *buf
++);
143 static int uniphier_i2c_rx(struct i2c_adapter
*adap
, u16 addr
, u16 len
,
148 dev_dbg(&adap
->dev
, "start condition\n");
149 ret
= uniphier_i2c_send_byte(adap
, addr
<< 1 |
150 UNIPHIER_I2C_DTRM_STA
|
151 UNIPHIER_I2C_DTRM_NACK
|
152 UNIPHIER_I2C_DTRM_RD
);
159 ret
= uniphier_i2c_xfer_byte(adap
,
160 len
? 0 : UNIPHIER_I2C_DTRM_NACK
,
170 static int uniphier_i2c_stop(struct i2c_adapter
*adap
)
172 dev_dbg(&adap
->dev
, "stop condition\n");
173 return uniphier_i2c_send_byte(adap
, UNIPHIER_I2C_DTRM_STO
|
174 UNIPHIER_I2C_DTRM_NACK
);
177 static int uniphier_i2c_master_xfer_one(struct i2c_adapter
*adap
,
178 struct i2c_msg
*msg
, bool stop
)
180 bool is_read
= msg
->flags
& I2C_M_RD
;
181 bool recovery
= false;
184 dev_dbg(&adap
->dev
, "%s: addr=0x%02x, len=%d, stop=%d\n",
185 is_read
? "receive" : "transmit", msg
->addr
, msg
->len
, stop
);
188 ret
= uniphier_i2c_rx(adap
, msg
->addr
, msg
->len
, msg
->buf
);
190 ret
= uniphier_i2c_tx(adap
, msg
->addr
, msg
->len
, msg
->buf
);
192 if (ret
== -EAGAIN
) /* could not acquire bus. bail out without STOP */
195 if (ret
== -ETIMEDOUT
) {
196 /* This error is fatal. Needs recovery. */
202 int ret2
= uniphier_i2c_stop(adap
);
205 /* Failed to issue STOP. The bus needs recovery. */
212 i2c_recover_bus(adap
);
217 static int uniphier_i2c_check_bus_busy(struct i2c_adapter
*adap
)
219 struct uniphier_i2c_priv
*priv
= i2c_get_adapdata(adap
);
221 if (!(readl(priv
->membase
+ UNIPHIER_I2C_DREC
) &
222 UNIPHIER_I2C_DREC_BBN
)) {
223 if (priv
->busy_cnt
++ > 3) {
225 * If bus busy continues too long, it is probably
226 * in a wrong state. Try bus recovery.
228 i2c_recover_bus(adap
);
239 static int uniphier_i2c_master_xfer(struct i2c_adapter
*adap
,
240 struct i2c_msg
*msgs
, int num
)
242 struct i2c_msg
*msg
, *emsg
= msgs
+ num
;
245 ret
= uniphier_i2c_check_bus_busy(adap
);
249 for (msg
= msgs
; msg
< emsg
; msg
++) {
250 /* If next message is read, skip the stop condition */
251 bool stop
= !(msg
+ 1 < emsg
&& msg
[1].flags
& I2C_M_RD
);
252 /* but, force it if I2C_M_STOP is set */
253 if (msg
->flags
& I2C_M_STOP
)
256 ret
= uniphier_i2c_master_xfer_one(adap
, msg
, stop
);
264 static u32
uniphier_i2c_functionality(struct i2c_adapter
*adap
)
266 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
;
269 static const struct i2c_algorithm uniphier_i2c_algo
= {
270 .master_xfer
= uniphier_i2c_master_xfer
,
271 .functionality
= uniphier_i2c_functionality
,
274 static void uniphier_i2c_reset(struct uniphier_i2c_priv
*priv
, bool reset_on
)
276 u32 val
= UNIPHIER_I2C_BRST_RSCL
;
278 val
|= reset_on
? 0 : UNIPHIER_I2C_BRST_FOEN
;
279 writel(val
, priv
->membase
+ UNIPHIER_I2C_BRST
);
282 static int uniphier_i2c_get_scl(struct i2c_adapter
*adap
)
284 struct uniphier_i2c_priv
*priv
= i2c_get_adapdata(adap
);
286 return !!(readl(priv
->membase
+ UNIPHIER_I2C_BSTS
) &
287 UNIPHIER_I2C_BSTS_SCL
);
290 static void uniphier_i2c_set_scl(struct i2c_adapter
*adap
, int val
)
292 struct uniphier_i2c_priv
*priv
= i2c_get_adapdata(adap
);
294 writel(val
? UNIPHIER_I2C_BRST_RSCL
: 0,
295 priv
->membase
+ UNIPHIER_I2C_BRST
);
298 static int uniphier_i2c_get_sda(struct i2c_adapter
*adap
)
300 struct uniphier_i2c_priv
*priv
= i2c_get_adapdata(adap
);
302 return !!(readl(priv
->membase
+ UNIPHIER_I2C_BSTS
) &
303 UNIPHIER_I2C_BSTS_SDA
);
306 static void uniphier_i2c_unprepare_recovery(struct i2c_adapter
*adap
)
308 uniphier_i2c_reset(i2c_get_adapdata(adap
), false);
311 static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info
= {
312 .recover_bus
= i2c_generic_scl_recovery
,
313 .get_scl
= uniphier_i2c_get_scl
,
314 .set_scl
= uniphier_i2c_set_scl
,
315 .get_sda
= uniphier_i2c_get_sda
,
316 .unprepare_recovery
= uniphier_i2c_unprepare_recovery
,
319 static int uniphier_i2c_clk_init(struct device
*dev
,
320 struct uniphier_i2c_priv
*priv
)
322 struct device_node
*np
= dev
->of_node
;
323 unsigned long clk_rate
;
327 if (of_property_read_u32(np
, "clock-frequency", &bus_speed
))
328 bus_speed
= UNIPHIER_I2C_DEFAULT_SPEED
;
330 if (bus_speed
> UNIPHIER_I2C_MAX_SPEED
)
331 bus_speed
= UNIPHIER_I2C_MAX_SPEED
;
333 /* Get input clk rate through clk driver */
334 priv
->clk
= devm_clk_get(dev
, NULL
);
335 if (IS_ERR(priv
->clk
)) {
336 dev_err(dev
, "failed to get clock\n");
337 return PTR_ERR(priv
->clk
);
340 ret
= clk_prepare_enable(priv
->clk
);
344 clk_rate
= clk_get_rate(priv
->clk
);
346 uniphier_i2c_reset(priv
, true);
348 writel((clk_rate
/ bus_speed
/ 2 << 16) | (clk_rate
/ bus_speed
),
349 priv
->membase
+ UNIPHIER_I2C_CLK
);
351 uniphier_i2c_reset(priv
, false);
356 static int uniphier_i2c_probe(struct platform_device
*pdev
)
358 struct device
*dev
= &pdev
->dev
;
359 struct uniphier_i2c_priv
*priv
;
360 struct resource
*regs
;
364 priv
= devm_kzalloc(dev
, sizeof(*priv
), GFP_KERNEL
);
368 regs
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
369 priv
->membase
= devm_ioremap_resource(dev
, regs
);
370 if (IS_ERR(priv
->membase
))
371 return PTR_ERR(priv
->membase
);
373 irq
= platform_get_irq(pdev
, 0);
375 dev_err(dev
, "failed to get IRQ number");
379 init_completion(&priv
->comp
);
380 priv
->adap
.owner
= THIS_MODULE
;
381 priv
->adap
.algo
= &uniphier_i2c_algo
;
382 priv
->adap
.dev
.parent
= dev
;
383 priv
->adap
.dev
.of_node
= dev
->of_node
;
384 strlcpy(priv
->adap
.name
, "UniPhier I2C", sizeof(priv
->adap
.name
));
385 priv
->adap
.bus_recovery_info
= &uniphier_i2c_bus_recovery_info
;
386 i2c_set_adapdata(&priv
->adap
, priv
);
387 platform_set_drvdata(pdev
, priv
);
389 ret
= uniphier_i2c_clk_init(dev
, priv
);
393 ret
= devm_request_irq(dev
, irq
, uniphier_i2c_interrupt
, 0, pdev
->name
,
396 dev_err(dev
, "failed to request irq %d\n", irq
);
400 ret
= i2c_add_adapter(&priv
->adap
);
402 dev_err(dev
, "failed to add I2C adapter\n");
408 clk_disable_unprepare(priv
->clk
);
413 static int uniphier_i2c_remove(struct platform_device
*pdev
)
415 struct uniphier_i2c_priv
*priv
= platform_get_drvdata(pdev
);
417 i2c_del_adapter(&priv
->adap
);
418 clk_disable_unprepare(priv
->clk
);
423 static const struct of_device_id uniphier_i2c_match
[] = {
424 { .compatible
= "socionext,uniphier-i2c" },
427 MODULE_DEVICE_TABLE(of
, uniphier_i2c_match
);
429 static struct platform_driver uniphier_i2c_drv
= {
430 .probe
= uniphier_i2c_probe
,
431 .remove
= uniphier_i2c_remove
,
433 .name
= "uniphier-i2c",
434 .of_match_table
= uniphier_i2c_match
,
437 module_platform_driver(uniphier_i2c_drv
);
439 MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
440 MODULE_DESCRIPTION("UniPhier I2C bus driver");
441 MODULE_LICENSE("GPL");