?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
s390/ptrace: get rid of long longs in psw_bits
[linux/fpc-iii.git] / drivers / scsi / lpfc / lpfc_scsi.c
blob4679ed4444a737e906342473031397b2137443ff
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2015 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
8 * *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
21 #include <linux/pci.h>
22 #include <linux/slab.h>
23 #include <linux/interrupt.h>
24 #include <linux/export.h>
25 #include <linux/delay.h>
26 #include <asm/unaligned.h>
27 #include <linux/crc-t10dif.h>
28 #include <net/checksum.h>
29
30 #include <scsi/scsi.h>
31 #include <scsi/scsi_device.h>
32 #include <scsi/scsi_eh.h>
33 #include <scsi/scsi_host.h>
34 #include <scsi/scsi_tcq.h>
35 #include <scsi/scsi_transport_fc.h>
36
37 #include "lpfc_version.h"
38 #include "lpfc_hw4.h"
39 #include "lpfc_hw.h"
40 #include "lpfc_sli.h"
41 #include "lpfc_sli4.h"
42 #include "lpfc_nl.h"
43 #include "lpfc_disc.h"
44 #include "lpfc.h"
45 #include "lpfc_scsi.h"
46 #include "lpfc_logmsg.h"
47 #include "lpfc_crtn.h"
48 #include "lpfc_vport.h"
49
50 #define LPFC_RESET_WAIT 2
51 #define LPFC_ABORT_WAIT 2
52
53 int _dump_buf_done = 1;
54
55 static char *dif_op_str[] = {
56 "PROT_NORMAL",
57 "PROT_READ_INSERT",
58 "PROT_WRITE_STRIP",
59 "PROT_READ_STRIP",
60 "PROT_WRITE_INSERT",
61 "PROT_READ_PASS",
62 "PROT_WRITE_PASS",
63 };
64
65 struct scsi_dif_tuple {
66 __be16 guard_tag; /* Checksum */
67 __be16 app_tag; /* Opaque storage */
68 __be32 ref_tag; /* Target LBA or indirect LBA */
69 };
70
71 static struct lpfc_rport_data *
72 lpfc_rport_data_from_scsi_device(struct scsi_device *sdev)
73 {
74 struct lpfc_vport *vport = (struct lpfc_vport *)sdev->host->hostdata;
75
76 if (vport->phba->cfg_fof)
77 return ((struct lpfc_device_data *)sdev->hostdata)->rport_data;
78 else
79 return (struct lpfc_rport_data *)sdev->hostdata;
80 }
81
82 static void
83 lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
84 static void
85 lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
86 static int
87 lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc);
88
89 static void
90 lpfc_debug_save_data(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
91 {
92 void *src, *dst;
93 struct scatterlist *sgde = scsi_sglist(cmnd);
94
95 if (!_dump_buf_data) {
96 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
97 "9050 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
98 __func__);
99 return;
100 }
101
102
103 if (!sgde) {
104 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
105 "9051 BLKGRD: ERROR: data scatterlist is null\n");
106 return;
107 }
108
109 dst = (void *) _dump_buf_data;
110 while (sgde) {
111 src = sg_virt(sgde);
112 memcpy(dst, src, sgde->length);
113 dst += sgde->length;
114 sgde = sg_next(sgde);
115 }
116 }
117
118 static void
119 lpfc_debug_save_dif(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
120 {
121 void *src, *dst;
122 struct scatterlist *sgde = scsi_prot_sglist(cmnd);
123
124 if (!_dump_buf_dif) {
125 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
126 "9052 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
127 __func__);
128 return;
129 }
130
131 if (!sgde) {
132 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
133 "9053 BLKGRD: ERROR: prot scatterlist is null\n");
134 return;
135 }
136
137 dst = _dump_buf_dif;
138 while (sgde) {
139 src = sg_virt(sgde);
140 memcpy(dst, src, sgde->length);
141 dst += sgde->length;
142 sgde = sg_next(sgde);
143 }
144 }
145
146 static inline unsigned
147 lpfc_cmd_blksize(struct scsi_cmnd *sc)
148 {
149 return sc->device->sector_size;
150 }
151
152 #define LPFC_CHECK_PROTECT_GUARD 1
153 #define LPFC_CHECK_PROTECT_REF 2
154 static inline unsigned
155 lpfc_cmd_protect(struct scsi_cmnd *sc, int flag)
156 {
157 return 1;
158 }
159
160 static inline unsigned
161 lpfc_cmd_guard_csum(struct scsi_cmnd *sc)
162 {
163 if (lpfc_prot_group_type(NULL, sc) == LPFC_PG_TYPE_NO_DIF)
164 return 0;
165 if (scsi_host_get_guard(sc->device->host) == SHOST_DIX_GUARD_IP)
166 return 1;
167 return 0;
168 }
169
170 /**
171 * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge.
172 * @phba: Pointer to HBA object.
173 * @lpfc_cmd: lpfc scsi command object pointer.
174 *
175 * This function is called from the lpfc_prep_task_mgmt_cmd function to
176 * set the last bit in the response sge entry.
177 **/
178 static void
179 lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
180 struct lpfc_scsi_buf *lpfc_cmd)
181 {
182 struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
183 if (sgl) {
184 sgl += 1;
185 sgl->word2 = le32_to_cpu(sgl->word2);
186 bf_set(lpfc_sli4_sge_last, sgl, 1);
187 sgl->word2 = cpu_to_le32(sgl->word2);
188 }
189 }
190
191 /**
192 * lpfc_update_stats - Update statistical data for the command completion
193 * @phba: Pointer to HBA object.
194 * @lpfc_cmd: lpfc scsi command object pointer.
195 *
196 * This function is called when there is a command completion and this
197 * function updates the statistical data for the command completion.
198 **/
199 static void
200 lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
201 {
202 struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
203 struct lpfc_nodelist *pnode = rdata->pnode;
204 struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
205 unsigned long flags;
206 struct Scsi_Host *shost = cmd->device->host;
207 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
208 unsigned long latency;
209 int i;
210
211 if (cmd->result)
212 return;
213
214 latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time);
215
216 spin_lock_irqsave(shost->host_lock, flags);
217 if (!vport->stat_data_enabled ||
218 vport->stat_data_blocked ||
219 !pnode ||
220 !pnode->lat_data ||
221 (phba->bucket_type == LPFC_NO_BUCKET)) {
222 spin_unlock_irqrestore(shost->host_lock, flags);
223 return;
224 }
225
226 if (phba->bucket_type == LPFC_LINEAR_BUCKET) {
227 i = (latency + phba->bucket_step - 1 - phba->bucket_base)/
228 phba->bucket_step;
229 /* check array subscript bounds */
230 if (i < 0)
231 i = 0;
232 else if (i >= LPFC_MAX_BUCKET_COUNT)
233 i = LPFC_MAX_BUCKET_COUNT - 1;
234 } else {
235 for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++)
236 if (latency <= (phba->bucket_base +
237 ((1<<i)*phba->bucket_step)))
238 break;
239 }
240
241 pnode->lat_data[i].cmd_count++;
242 spin_unlock_irqrestore(shost->host_lock, flags);
243 }
244
245 /**
246 * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
247 * @phba: The Hba for which this call is being executed.
248 *
249 * This routine is called when there is resource error in driver or firmware.
250 * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine
251 * posts at most 1 event each second. This routine wakes up worker thread of
252 * @phba to process WORKER_RAM_DOWN_EVENT event.
253 *
254 * This routine should be called with no lock held.
255 **/
256 void
257 lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
258 {
259 unsigned long flags;
260 uint32_t evt_posted;
261 unsigned long expires;
262
263 spin_lock_irqsave(&phba->hbalock, flags);
264 atomic_inc(&phba->num_rsrc_err);
265 phba->last_rsrc_error_time = jiffies;
266
267 expires = phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL;
268 if (time_after(expires, jiffies)) {
269 spin_unlock_irqrestore(&phba->hbalock, flags);
270 return;
271 }
272
273 phba->last_ramp_down_time = jiffies;
274
275 spin_unlock_irqrestore(&phba->hbalock, flags);
276
277 spin_lock_irqsave(&phba->pport->work_port_lock, flags);
278 evt_posted = phba->pport->work_port_events & WORKER_RAMP_DOWN_QUEUE;
279 if (!evt_posted)
280 phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
281 spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
282
283 if (!evt_posted)
284 lpfc_worker_wake_up(phba);
285 return;
286 }
287
288 /**
289 * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
290 * @phba: The Hba for which this call is being executed.
291 *
292 * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker
293 * thread.This routine reduces queue depth for all scsi device on each vport
294 * associated with @phba.
295 **/
296 void
297 lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
298 {
299 struct lpfc_vport **vports;
300 struct Scsi_Host *shost;
301 struct scsi_device *sdev;
302 unsigned long new_queue_depth;
303 unsigned long num_rsrc_err, num_cmd_success;
304 int i;
305
306 num_rsrc_err = atomic_read(&phba->num_rsrc_err);
307 num_cmd_success = atomic_read(&phba->num_cmd_success);
308
309 /*
310 * The error and success command counters are global per
311 * driver instance. If another handler has already
312 * operated on this error event, just exit.
313 */
314 if (num_rsrc_err == 0)
315 return;
316
317 vports = lpfc_create_vport_work_array(phba);
318 if (vports != NULL)
319 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
320 shost = lpfc_shost_from_vport(vports[i]);
321 shost_for_each_device(sdev, shost) {
322 new_queue_depth =
323 sdev->queue_depth * num_rsrc_err /
324 (num_rsrc_err + num_cmd_success);
325 if (!new_queue_depth)
326 new_queue_depth = sdev->queue_depth - 1;
327 else
328 new_queue_depth = sdev->queue_depth -
329 new_queue_depth;
330 scsi_change_queue_depth(sdev, new_queue_depth);
331 }
332 }
333 lpfc_destroy_vport_work_array(phba, vports);
334 atomic_set(&phba->num_rsrc_err, 0);
335 atomic_set(&phba->num_cmd_success, 0);
336 }
337
338 /**
339 * lpfc_scsi_dev_block - set all scsi hosts to block state
340 * @phba: Pointer to HBA context object.
341 *
342 * This function walks vport list and set each SCSI host to block state
343 * by invoking fc_remote_port_delete() routine. This function is invoked
344 * with EEH when device's PCI slot has been permanently disabled.
345 **/
346 void
347 lpfc_scsi_dev_block(struct lpfc_hba *phba)
348 {
349 struct lpfc_vport **vports;
350 struct Scsi_Host *shost;
351 struct scsi_device *sdev;
352 struct fc_rport *rport;
353 int i;
354
355 vports = lpfc_create_vport_work_array(phba);
356 if (vports != NULL)
357 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
358 shost = lpfc_shost_from_vport(vports[i]);
359 shost_for_each_device(sdev, shost) {
360 rport = starget_to_rport(scsi_target(sdev));
361 fc_remote_port_delete(rport);
362 }
363 }
364 lpfc_destroy_vport_work_array(phba, vports);
365 }
366
367 /**
368 * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
369 * @vport: The virtual port for which this call being executed.
370 * @num_to_allocate: The requested number of buffers to allocate.
371 *
372 * This routine allocates a scsi buffer for device with SLI-3 interface spec,
373 * the scsi buffer contains all the necessary information needed to initiate
374 * a SCSI I/O. The non-DMAable buffer region contains information to build
375 * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
376 * and the initial BPL. In addition to allocating memory, the FCP CMND and
377 * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
378 *
379 * Return codes:
380 * int - number of scsi buffers that were allocated.
381 * 0 = failure, less than num_to_alloc is a partial failure.
382 **/
383 static int
384 lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
385 {
386 struct lpfc_hba *phba = vport->phba;
387 struct lpfc_scsi_buf *psb;
388 struct ulp_bde64 *bpl;
389 IOCB_t *iocb;
390 dma_addr_t pdma_phys_fcp_cmd;
391 dma_addr_t pdma_phys_fcp_rsp;
392 dma_addr_t pdma_phys_bpl;
393 uint16_t iotag;
394 int bcnt, bpl_size;
395
396 bpl_size = phba->cfg_sg_dma_buf_size -
397 (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
398
399 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
400 "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
401 num_to_alloc, phba->cfg_sg_dma_buf_size,
402 (int)sizeof(struct fcp_cmnd),
403 (int)sizeof(struct fcp_rsp), bpl_size);
404
405 for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
406 psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
407 if (!psb)
408 break;
409
410 /*
411 * Get memory from the pci pool to map the virt space to pci
412 * bus space for an I/O. The DMA buffer includes space for the
413 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
414 * necessary to support the sg_tablesize.
415 */
416 psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
417 GFP_KERNEL, &psb->dma_handle);
418 if (!psb->data) {
419 kfree(psb);
420 break;
421 }
422
423 /* Initialize virtual ptrs to dma_buf region. */
424 memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
425
426 /* Allocate iotag for psb->cur_iocbq. */
427 iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
428 if (iotag == 0) {
429 pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
430 psb->data, psb->dma_handle);
431 kfree(psb);
432 break;
433 }
434 psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
435
436 psb->fcp_cmnd = psb->data;
437 psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
438 psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
439 sizeof(struct fcp_rsp);
440
441 /* Initialize local short-hand pointers. */
442 bpl = psb->fcp_bpl;
443 pdma_phys_fcp_cmd = psb->dma_handle;
444 pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
445 pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
446 sizeof(struct fcp_rsp);
447
448 /*
449 * The first two bdes are the FCP_CMD and FCP_RSP. The balance
450 * are sg list bdes. Initialize the first two and leave the
451 * rest for queuecommand.
452 */
453 bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
454 bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
455 bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
456 bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
457 bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
458
459 /* Setup the physical region for the FCP RSP */
460 bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
461 bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
462 bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
463 bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
464 bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
465
466 /*
467 * Since the IOCB for the FCP I/O is built into this
468 * lpfc_scsi_buf, initialize it with all known data now.
469 */
470 iocb = &psb->cur_iocbq.iocb;
471 iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
472 if ((phba->sli_rev == 3) &&
473 !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
474 /* fill in immediate fcp command BDE */
475 iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
476 iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
477 iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
478 unsli3.fcp_ext.icd);
479 iocb->un.fcpi64.bdl.addrHigh = 0;
480 iocb->ulpBdeCount = 0;
481 iocb->ulpLe = 0;
482 /* fill in response BDE */
483 iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
484 BUFF_TYPE_BDE_64;
485 iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
486 sizeof(struct fcp_rsp);
487 iocb->unsli3.fcp_ext.rbde.addrLow =
488 putPaddrLow(pdma_phys_fcp_rsp);
489 iocb->unsli3.fcp_ext.rbde.addrHigh =
490 putPaddrHigh(pdma_phys_fcp_rsp);
491 } else {
492 iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
493 iocb->un.fcpi64.bdl.bdeSize =
494 (2 * sizeof(struct ulp_bde64));
495 iocb->un.fcpi64.bdl.addrLow =
496 putPaddrLow(pdma_phys_bpl);
497 iocb->un.fcpi64.bdl.addrHigh =
498 putPaddrHigh(pdma_phys_bpl);
499 iocb->ulpBdeCount = 1;
500 iocb->ulpLe = 1;
501 }
502 iocb->ulpClass = CLASS3;
503 psb->status = IOSTAT_SUCCESS;
504 /* Put it back into the SCSI buffer list */
505 psb->cur_iocbq.context1 = psb;
506 lpfc_release_scsi_buf_s3(phba, psb);
507
508 }
509
510 return bcnt;
511 }
512
513 /**
514 * lpfc_sli4_vport_delete_fcp_xri_aborted -Remove all ndlp references for vport
515 * @vport: pointer to lpfc vport data structure.
516 *
517 * This routine is invoked by the vport cleanup for deletions and the cleanup
518 * for an ndlp on removal.
519 **/
520 void
521 lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport)
522 {
523 struct lpfc_hba *phba = vport->phba;
524 struct lpfc_scsi_buf *psb, *next_psb;
525 unsigned long iflag = 0;
526
527 spin_lock_irqsave(&phba->hbalock, iflag);
528 spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
529 list_for_each_entry_safe(psb, next_psb,
530 &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
531 if (psb->rdata && psb->rdata->pnode
532 && psb->rdata->pnode->vport == vport)
533 psb->rdata = NULL;
534 }
535 spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
536 spin_unlock_irqrestore(&phba->hbalock, iflag);
537 }
538
539 /**
540 * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
541 * @phba: pointer to lpfc hba data structure.
542 * @axri: pointer to the fcp xri abort wcqe structure.
543 *
544 * This routine is invoked by the worker thread to process a SLI4 fast-path
545 * FCP aborted xri.
546 **/
547 void
548 lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
549 struct sli4_wcqe_xri_aborted *axri)
550 {
551 uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
552 uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
553 struct lpfc_scsi_buf *psb, *next_psb;
554 unsigned long iflag = 0;
555 struct lpfc_iocbq *iocbq;
556 int i;
557 struct lpfc_nodelist *ndlp;
558 int rrq_empty = 0;
559 struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
560
561 spin_lock_irqsave(&phba->hbalock, iflag);
562 spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
563 list_for_each_entry_safe(psb, next_psb,
564 &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
565 if (psb->cur_iocbq.sli4_xritag == xri) {
566 list_del(&psb->list);
567 psb->exch_busy = 0;
568 psb->status = IOSTAT_SUCCESS;
569 spin_unlock(
570 &phba->sli4_hba.abts_scsi_buf_list_lock);
571 if (psb->rdata && psb->rdata->pnode)
572 ndlp = psb->rdata->pnode;
573 else
574 ndlp = NULL;
575
576 rrq_empty = list_empty(&phba->active_rrq_list);
577 spin_unlock_irqrestore(&phba->hbalock, iflag);
578 if (ndlp) {
579 lpfc_set_rrq_active(phba, ndlp,
580 psb->cur_iocbq.sli4_lxritag, rxid, 1);
581 lpfc_sli4_abts_err_handler(phba, ndlp, axri);
582 }
583 lpfc_release_scsi_buf_s4(phba, psb);
584 if (rrq_empty)
585 lpfc_worker_wake_up(phba);
586 return;
587 }
588 }
589 spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
590 for (i = 1; i <= phba->sli.last_iotag; i++) {
591 iocbq = phba->sli.iocbq_lookup[i];
592
593 if (!(iocbq->iocb_flag & LPFC_IO_FCP) ||
594 (iocbq->iocb_flag & LPFC_IO_LIBDFC))
595 continue;
596 if (iocbq->sli4_xritag != xri)
597 continue;
598 psb = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
599 psb->exch_busy = 0;
600 spin_unlock_irqrestore(&phba->hbalock, iflag);
601 if (!list_empty(&pring->txq))
602 lpfc_worker_wake_up(phba);
603 return;
604
605 }
606 spin_unlock_irqrestore(&phba->hbalock, iflag);
607 }
608
609 /**
610 * lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list
611 * @phba: pointer to lpfc hba data structure.
612 * @post_sblist: pointer to the scsi buffer list.
613 *
614 * This routine walks a list of scsi buffers that was passed in. It attempts
615 * to construct blocks of scsi buffer sgls which contains contiguous xris and
616 * uses the non-embedded SGL block post mailbox commands to post to the port.
617 * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use
618 * embedded SGL post mailbox command for posting. The @post_sblist passed in
619 * must be local list, thus no lock is needed when manipulate the list.
620 *
621 * Returns: 0 = failure, non-zero number of successfully posted buffers.
622 **/
623 static int
624 lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
625 struct list_head *post_sblist, int sb_count)
626 {
627 struct lpfc_scsi_buf *psb, *psb_next;
628 int status, sgl_size;
629 int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
630 dma_addr_t pdma_phys_bpl1;
631 int last_xritag = NO_XRI;
632 LIST_HEAD(prep_sblist);
633 LIST_HEAD(blck_sblist);
634 LIST_HEAD(scsi_sblist);
635
636 /* sanity check */
637 if (sb_count <= 0)
638 return -EINVAL;
639
640 sgl_size = phba->cfg_sg_dma_buf_size -
641 (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
642
643 list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
644 list_del_init(&psb->list);
645 block_cnt++;
646 if ((last_xritag != NO_XRI) &&
647 (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) {
648 /* a hole in xri block, form a sgl posting block */
649 list_splice_init(&prep_sblist, &blck_sblist);
650 post_cnt = block_cnt - 1;
651 /* prepare list for next posting block */
652 list_add_tail(&psb->list, &prep_sblist);
653 block_cnt = 1;
654 } else {
655 /* prepare list for next posting block */
656 list_add_tail(&psb->list, &prep_sblist);
657 /* enough sgls for non-embed sgl mbox command */
658 if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
659 list_splice_init(&prep_sblist, &blck_sblist);
660 post_cnt = block_cnt;
661 block_cnt = 0;
662 }
663 }
664 num_posting++;
665 last_xritag = psb->cur_iocbq.sli4_xritag;
666
667 /* end of repost sgl list condition for SCSI buffers */
668 if (num_posting == sb_count) {
669 if (post_cnt == 0) {
670 /* last sgl posting block */
671 list_splice_init(&prep_sblist, &blck_sblist);
672 post_cnt = block_cnt;
673 } else if (block_cnt == 1) {
674 /* last single sgl with non-contiguous xri */
675 if (sgl_size > SGL_PAGE_SIZE)
676 pdma_phys_bpl1 = psb->dma_phys_bpl +
677 SGL_PAGE_SIZE;
678 else
679 pdma_phys_bpl1 = 0;
680 status = lpfc_sli4_post_sgl(phba,
681 psb->dma_phys_bpl,
682 pdma_phys_bpl1,
683 psb->cur_iocbq.sli4_xritag);
684 if (status) {
685 /* failure, put on abort scsi list */
686 psb->exch_busy = 1;
687 } else {
688 /* success, put on SCSI buffer list */
689 psb->exch_busy = 0;
690 psb->status = IOSTAT_SUCCESS;
691 num_posted++;
692 }
693 /* success, put on SCSI buffer sgl list */
694 list_add_tail(&psb->list, &scsi_sblist);
695 }
696 }
697
698 /* continue until a nembed page worth of sgls */
699 if (post_cnt == 0)
700 continue;
701
702 /* post block of SCSI buffer list sgls */
703 status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist,
704 post_cnt);
705
706 /* don't reset xirtag due to hole in xri block */
707 if (block_cnt == 0)
708 last_xritag = NO_XRI;
709
710 /* reset SCSI buffer post count for next round of posting */
711 post_cnt = 0;
712
713 /* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */
714 while (!list_empty(&blck_sblist)) {
715 list_remove_head(&blck_sblist, psb,
716 struct lpfc_scsi_buf, list);
717 if (status) {
718 /* failure, put on abort scsi list */
719 psb->exch_busy = 1;
720 } else {
721 /* success, put on SCSI buffer list */
722 psb->exch_busy = 0;
723 psb->status = IOSTAT_SUCCESS;
724 num_posted++;
725 }
726 list_add_tail(&psb->list, &scsi_sblist);
727 }
728 }
729 /* Push SCSI buffers with sgl posted to the availble list */
730 while (!list_empty(&scsi_sblist)) {
731 list_remove_head(&scsi_sblist, psb,
732 struct lpfc_scsi_buf, list);
733 lpfc_release_scsi_buf_s4(phba, psb);
734 }
735 return num_posted;
736 }
737
738 /**
739 * lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls
740 * @phba: pointer to lpfc hba data structure.
741 *
742 * This routine walks the list of scsi buffers that have been allocated and
743 * repost them to the port by using SGL block post. This is needed after a
744 * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
745 * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
746 * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
747 *
748 * Returns: 0 = success, non-zero failure.
749 **/
750 int
751 lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
752 {
753 LIST_HEAD(post_sblist);
754 int num_posted, rc = 0;
755
756 /* get all SCSI buffers need to repost to a local list */
757 spin_lock_irq(&phba->scsi_buf_list_get_lock);
758 spin_lock(&phba->scsi_buf_list_put_lock);
759 list_splice_init(&phba->lpfc_scsi_buf_list_get, &post_sblist);
760 list_splice(&phba->lpfc_scsi_buf_list_put, &post_sblist);
761 spin_unlock(&phba->scsi_buf_list_put_lock);
762 spin_unlock_irq(&phba->scsi_buf_list_get_lock);
763
764 /* post the list of scsi buffer sgls to port if available */
765 if (!list_empty(&post_sblist)) {
766 num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist,
767 phba->sli4_hba.scsi_xri_cnt);
768 /* failed to post any scsi buffer, return error */
769 if (num_posted == 0)
770 rc = -EIO;
771 }
772 return rc;
773 }
774
775 /**
776 * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
777 * @vport: The virtual port for which this call being executed.
778 * @num_to_allocate: The requested number of buffers to allocate.
779 *
780 * This routine allocates scsi buffers for device with SLI-4 interface spec,
781 * the scsi buffer contains all the necessary information needed to initiate
782 * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put
783 * them on a list, it post them to the port by using SGL block post.
784 *
785 * Return codes:
786 * int - number of scsi buffers that were allocated and posted.
787 * 0 = failure, less than num_to_alloc is a partial failure.
788 **/
789 static int
790 lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
791 {
792 struct lpfc_hba *phba = vport->phba;
793 struct lpfc_scsi_buf *psb;
794 struct sli4_sge *sgl;
795 IOCB_t *iocb;
796 dma_addr_t pdma_phys_fcp_cmd;
797 dma_addr_t pdma_phys_fcp_rsp;
798 dma_addr_t pdma_phys_bpl;
799 uint16_t iotag, lxri = 0;
800 int bcnt, num_posted, sgl_size;
801 LIST_HEAD(prep_sblist);
802 LIST_HEAD(post_sblist);
803 LIST_HEAD(scsi_sblist);
804
805 sgl_size = phba->cfg_sg_dma_buf_size -
806 (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
807
808 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
809 "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
810 num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size,
811 (int)sizeof(struct fcp_cmnd),
812 (int)sizeof(struct fcp_rsp));
813
814 for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
815 psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
816 if (!psb)
817 break;
818 /*
819 * Get memory from the pci pool to map the virt space to
820 * pci bus space for an I/O. The DMA buffer includes space
821 * for the struct fcp_cmnd, struct fcp_rsp and the number
822 * of bde's necessary to support the sg_tablesize.
823 */
824 psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
825 GFP_KERNEL, &psb->dma_handle);
826 if (!psb->data) {
827 kfree(psb);
828 break;
829 }
830 memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
831
832 /*
833 * 4K Page alignment is CRITICAL to BlockGuard, double check
834 * to be sure.
835 */
836 if (phba->cfg_enable_bg && (((unsigned long)(psb->data) &
837 (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
838 pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
839 psb->data, psb->dma_handle);
840 kfree(psb);
841 break;
842 }
843
844
845 lxri = lpfc_sli4_next_xritag(phba);
846 if (lxri == NO_XRI) {
847 pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
848 psb->data, psb->dma_handle);
849 kfree(psb);
850 break;
851 }
852
853 /* Allocate iotag for psb->cur_iocbq. */
854 iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
855 if (iotag == 0) {
856 pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
857 psb->data, psb->dma_handle);
858 kfree(psb);
859 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
860 "3368 Failed to allocated IOTAG for"
861 " XRI:0x%x\n", lxri);
862 lpfc_sli4_free_xri(phba, lxri);
863 break;
864 }
865 psb->cur_iocbq.sli4_lxritag = lxri;
866 psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
867 psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
868 psb->fcp_bpl = psb->data;
869 psb->fcp_cmnd = (psb->data + sgl_size);
870 psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
871 sizeof(struct fcp_cmnd));
872
873 /* Initialize local short-hand pointers. */
874 sgl = (struct sli4_sge *)psb->fcp_bpl;
875 pdma_phys_bpl = psb->dma_handle;
876 pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size);
877 pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
878
879 /*
880 * The first two bdes are the FCP_CMD and FCP_RSP.
881 * The balance are sg list bdes. Initialize the
882 * first two and leave the rest for queuecommand.
883 */
884 sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
885 sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
886 sgl->word2 = le32_to_cpu(sgl->word2);
887 bf_set(lpfc_sli4_sge_last, sgl, 0);
888 sgl->word2 = cpu_to_le32(sgl->word2);
889 sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd));
890 sgl++;
891
892 /* Setup the physical region for the FCP RSP */
893 sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
894 sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
895 sgl->word2 = le32_to_cpu(sgl->word2);
896 bf_set(lpfc_sli4_sge_last, sgl, 1);
897 sgl->word2 = cpu_to_le32(sgl->word2);
898 sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp));
899
900 /*
901 * Since the IOCB for the FCP I/O is built into this
902 * lpfc_scsi_buf, initialize it with all known data now.
903 */
904 iocb = &psb->cur_iocbq.iocb;
905 iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
906 iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
907 /* setting the BLP size to 2 * sizeof BDE may not be correct.
908 * We are setting the bpl to point to out sgl. An sgl's
909 * entries are 16 bytes, a bpl entries are 12 bytes.
910 */
911 iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
912 iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
913 iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
914 iocb->ulpBdeCount = 1;
915 iocb->ulpLe = 1;
916 iocb->ulpClass = CLASS3;
917 psb->cur_iocbq.context1 = psb;
918 psb->dma_phys_bpl = pdma_phys_bpl;
919
920 /* add the scsi buffer to a post list */
921 list_add_tail(&psb->list, &post_sblist);
922 spin_lock_irq(&phba->scsi_buf_list_get_lock);
923 phba->sli4_hba.scsi_xri_cnt++;
924 spin_unlock_irq(&phba->scsi_buf_list_get_lock);
925 }
926 lpfc_printf_log(phba, KERN_INFO, LOG_BG,
927 "3021 Allocate %d out of %d requested new SCSI "
928 "buffers\n", bcnt, num_to_alloc);
929
930 /* post the list of scsi buffer sgls to port if available */
931 if (!list_empty(&post_sblist))
932 num_posted = lpfc_sli4_post_scsi_sgl_list(phba,
933 &post_sblist, bcnt);
934 else
935 num_posted = 0;
936
937 return num_posted;
938 }
939
940 /**
941 * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
942 * @vport: The virtual port for which this call being executed.
943 * @num_to_allocate: The requested number of buffers to allocate.
944 *
945 * This routine wraps the actual SCSI buffer allocator function pointer from
946 * the lpfc_hba struct.
947 *
948 * Return codes:
949 * int - number of scsi buffers that were allocated.
950 * 0 = failure, less than num_to_alloc is a partial failure.
951 **/
952 static inline int
953 lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
954 {
955 return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
956 }
957
958 /**
959 * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
960 * @phba: The HBA for which this call is being executed.
961 *
962 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
963 * and returns to caller.
964 *
965 * Return codes:
966 * NULL - Error
967 * Pointer to lpfc_scsi_buf - Success
968 **/
969 static struct lpfc_scsi_buf*
970 lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
971 {
972 struct lpfc_scsi_buf * lpfc_cmd = NULL;
973 struct list_head *scsi_buf_list_get = &phba->lpfc_scsi_buf_list_get;
974 unsigned long iflag = 0;
975
976 spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag);
977 list_remove_head(scsi_buf_list_get, lpfc_cmd, struct lpfc_scsi_buf,
978 list);
979 if (!lpfc_cmd) {
980 spin_lock(&phba->scsi_buf_list_put_lock);
981 list_splice(&phba->lpfc_scsi_buf_list_put,
982 &phba->lpfc_scsi_buf_list_get);
983 INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
984 list_remove_head(scsi_buf_list_get, lpfc_cmd,
985 struct lpfc_scsi_buf, list);
986 spin_unlock(&phba->scsi_buf_list_put_lock);
987 }
988 spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag);
989 return lpfc_cmd;
990 }
991 /**
992 * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
993 * @phba: The HBA for which this call is being executed.
994 *
995 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
996 * and returns to caller.
997 *
998 * Return codes:
999 * NULL - Error
1000 * Pointer to lpfc_scsi_buf - Success
1001 **/
1002 static struct lpfc_scsi_buf*
1003 lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
1004 {
1005 struct lpfc_scsi_buf *lpfc_cmd, *lpfc_cmd_next;
1006 unsigned long iflag = 0;
1007 int found = 0;
1008
1009 spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag);
1010 list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
1011 &phba->lpfc_scsi_buf_list_get, list) {
1012 if (lpfc_test_rrq_active(phba, ndlp,
1013 lpfc_cmd->cur_iocbq.sli4_lxritag))
1014 continue;
1015 list_del(&lpfc_cmd->list);
1016 found = 1;
1017 break;
1018 }
1019 if (!found) {
1020 spin_lock(&phba->scsi_buf_list_put_lock);
1021 list_splice(&phba->lpfc_scsi_buf_list_put,
1022 &phba->lpfc_scsi_buf_list_get);
1023 INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
1024 spin_unlock(&phba->scsi_buf_list_put_lock);
1025 list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
1026 &phba->lpfc_scsi_buf_list_get, list) {
1027 if (lpfc_test_rrq_active(
1028 phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag))
1029 continue;
1030 list_del(&lpfc_cmd->list);
1031 found = 1;
1032 break;
1033 }
1034 }
1035 spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag);
1036 if (!found)
1037 return NULL;
1038 return lpfc_cmd;
1039 }
1040 /**
1041 * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
1042 * @phba: The HBA for which this call is being executed.
1043 *
1044 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
1045 * and returns to caller.
1046 *
1047 * Return codes:
1048 * NULL - Error
1049 * Pointer to lpfc_scsi_buf - Success
1050 **/
1051 static struct lpfc_scsi_buf*
1052 lpfc_get_scsi_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
1053 {
1054 return phba->lpfc_get_scsi_buf(phba, ndlp);
1055 }
1056
1057 /**
1058 * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
1059 * @phba: The Hba for which this call is being executed.
1060 * @psb: The scsi buffer which is being released.
1061 *
1062 * This routine releases @psb scsi buffer by adding it to tail of @phba
1063 * lpfc_scsi_buf_list list.
1064 **/
1065 static void
1066 lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1067 {
1068 unsigned long iflag = 0;
1069
1070 psb->seg_cnt = 0;
1071 psb->nonsg_phys = 0;
1072 psb->prot_seg_cnt = 0;
1073
1074 spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
1075 psb->pCmd = NULL;
1076 psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
1077 list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
1078 spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
1079 }
1080
1081 /**
1082 * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
1083 * @phba: The Hba for which this call is being executed.
1084 * @psb: The scsi buffer which is being released.
1085 *
1086 * This routine releases @psb scsi buffer by adding it to tail of @phba
1087 * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
1088 * and cannot be reused for at least RA_TOV amount of time if it was
1089 * aborted.
1090 **/
1091 static void
1092 lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1093 {
1094 unsigned long iflag = 0;
1095
1096 psb->seg_cnt = 0;
1097 psb->nonsg_phys = 0;
1098 psb->prot_seg_cnt = 0;
1099
1100 if (psb->exch_busy) {
1101 spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
1102 iflag);
1103 psb->pCmd = NULL;
1104 list_add_tail(&psb->list,
1105 &phba->sli4_hba.lpfc_abts_scsi_buf_list);
1106 spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
1107 iflag);
1108 } else {
1109 psb->pCmd = NULL;
1110 psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
1111 spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
1112 list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
1113 spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
1114 }
1115 }
1116
1117 /**
1118 * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
1119 * @phba: The Hba for which this call is being executed.
1120 * @psb: The scsi buffer which is being released.
1121 *
1122 * This routine releases @psb scsi buffer by adding it to tail of @phba
1123 * lpfc_scsi_buf_list list.
1124 **/
1125 static void
1126 lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1127 {
1128
1129 phba->lpfc_release_scsi_buf(phba, psb);
1130 }
1131
1132 /**
1133 * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
1134 * @phba: The Hba for which this call is being executed.
1135 * @lpfc_cmd: The scsi buffer which is going to be mapped.
1136 *
1137 * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
1138 * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
1139 * through sg elements and format the bdea. This routine also initializes all
1140 * IOCB fields which are dependent on scsi command request buffer.
1141 *
1142 * Return codes:
1143 * 1 - Error
1144 * 0 - Success
1145 **/
1146 static int
1147 lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
1148 {
1149 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
1150 struct scatterlist *sgel = NULL;
1151 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
1152 struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
1153 struct lpfc_iocbq *iocbq = &lpfc_cmd->cur_iocbq;
1154 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
1155 struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
1156 dma_addr_t physaddr;
1157 uint32_t num_bde = 0;
1158 int nseg, datadir = scsi_cmnd->sc_data_direction;
1159
1160 /*
1161 * There are three possibilities here - use scatter-gather segment, use
1162 * the single mapping, or neither. Start the lpfc command prep by
1163 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
1164 * data bde entry.
1165 */
1166 bpl += 2;
1167 if (scsi_sg_count(scsi_cmnd)) {
1168 /*
1169 * The driver stores the segment count returned from pci_map_sg
1170 * because this a count of dma-mappings used to map the use_sg
1171 * pages. They are not guaranteed to be the same for those
1172 * architectures that implement an IOMMU.
1173 */
1174
1175 nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
1176 scsi_sg_count(scsi_cmnd), datadir);
1177 if (unlikely(!nseg))
1178 return 1;
1179
1180 lpfc_cmd->seg_cnt = nseg;
1181 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
1182 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1183 "9064 BLKGRD: %s: Too many sg segments from "
1184 "dma_map_sg. Config %d, seg_cnt %d\n",
1185 __func__, phba->cfg_sg_seg_cnt,
1186 lpfc_cmd->seg_cnt);
1187 lpfc_cmd->seg_cnt = 0;
1188 scsi_dma_unmap(scsi_cmnd);
1189 return 1;
1190 }
1191
1192 /*
1193 * The driver established a maximum scatter-gather segment count
1194 * during probe that limits the number of sg elements in any
1195 * single scsi command. Just run through the seg_cnt and format
1196 * the bde's.
1197 * When using SLI-3 the driver will try to fit all the BDEs into
1198 * the IOCB. If it can't then the BDEs get added to a BPL as it
1199 * does for SLI-2 mode.
1200 */
1201 scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
1202 physaddr = sg_dma_address(sgel);
1203 if (phba->sli_rev == 3 &&
1204 !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
1205 !(iocbq->iocb_flag & DSS_SECURITY_OP) &&
1206 nseg <= LPFC_EXT_DATA_BDE_COUNT) {
1207 data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
1208 data_bde->tus.f.bdeSize = sg_dma_len(sgel);
1209 data_bde->addrLow = putPaddrLow(physaddr);
1210 data_bde->addrHigh = putPaddrHigh(physaddr);
1211 data_bde++;
1212 } else {
1213 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
1214 bpl->tus.f.bdeSize = sg_dma_len(sgel);
1215 bpl->tus.w = le32_to_cpu(bpl->tus.w);
1216 bpl->addrLow =
1217 le32_to_cpu(putPaddrLow(physaddr));
1218 bpl->addrHigh =
1219 le32_to_cpu(putPaddrHigh(physaddr));
1220 bpl++;
1221 }
1222 }
1223 }
1224
1225 /*
1226 * Finish initializing those IOCB fields that are dependent on the
1227 * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
1228 * explicitly reinitialized and for SLI-3 the extended bde count is
1229 * explicitly reinitialized since all iocb memory resources are reused.
1230 */
1231 if (phba->sli_rev == 3 &&
1232 !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
1233 !(iocbq->iocb_flag & DSS_SECURITY_OP)) {
1234 if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
1235 /*
1236 * The extended IOCB format can only fit 3 BDE or a BPL.
1237 * This I/O has more than 3 BDE so the 1st data bde will
1238 * be a BPL that is filled in here.
1239 */
1240 physaddr = lpfc_cmd->dma_handle;
1241 data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
1242 data_bde->tus.f.bdeSize = (num_bde *
1243 sizeof(struct ulp_bde64));
1244 physaddr += (sizeof(struct fcp_cmnd) +
1245 sizeof(struct fcp_rsp) +
1246 (2 * sizeof(struct ulp_bde64)));
1247 data_bde->addrHigh = putPaddrHigh(physaddr);
1248 data_bde->addrLow = putPaddrLow(physaddr);
1249 /* ebde count includes the response bde and data bpl */
1250 iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
1251 } else {
1252 /* ebde count includes the response bde and data bdes */
1253 iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
1254 }
1255 } else {
1256 iocb_cmd->un.fcpi64.bdl.bdeSize =
1257 ((num_bde + 2) * sizeof(struct ulp_bde64));
1258 iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
1259 }
1260 fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
1261
1262 /*
1263 * Due to difference in data length between DIF/non-DIF paths,
1264 * we need to set word 4 of IOCB here
1265 */
1266 iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
1267 return 0;
1268 }
1269
1270 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1271
1272 /* Return if if error injection is detected by Initiator */
1273 #define BG_ERR_INIT 0x1
1274 /* Return if if error injection is detected by Target */
1275 #define BG_ERR_TGT 0x2
1276 /* Return if if swapping CSUM<-->CRC is required for error injection */
1277 #define BG_ERR_SWAP 0x10
1278 /* Return if disabling Guard/Ref/App checking is required for error injection */
1279 #define BG_ERR_CHECK 0x20
1280
1281 /**
1282 * lpfc_bg_err_inject - Determine if we should inject an error
1283 * @phba: The Hba for which this call is being executed.
1284 * @sc: The SCSI command to examine
1285 * @reftag: (out) BlockGuard reference tag for transmitted data
1286 * @apptag: (out) BlockGuard application tag for transmitted data
1287 * @new_guard (in) Value to replace CRC with if needed
1288 *
1289 * Returns BG_ERR_* bit mask or 0 if request ignored
1290 **/
1291 static int
1292 lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1293 uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
1294 {
1295 struct scatterlist *sgpe; /* s/g prot entry */
1296 struct lpfc_scsi_buf *lpfc_cmd = NULL;
1297 struct scsi_dif_tuple *src = NULL;
1298 struct lpfc_nodelist *ndlp;
1299 struct lpfc_rport_data *rdata;
1300 uint32_t op = scsi_get_prot_op(sc);
1301 uint32_t blksize;
1302 uint32_t numblks;
1303 sector_t lba;
1304 int rc = 0;
1305 int blockoff = 0;
1306
1307 if (op == SCSI_PROT_NORMAL)
1308 return 0;
1309
1310 sgpe = scsi_prot_sglist(sc);
1311 lba = scsi_get_lba(sc);
1312
1313 /* First check if we need to match the LBA */
1314 if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
1315 blksize = lpfc_cmd_blksize(sc);
1316 numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;
1317
1318 /* Make sure we have the right LBA if one is specified */
1319 if ((phba->lpfc_injerr_lba < lba) ||
1320 (phba->lpfc_injerr_lba >= (lba + numblks)))
1321 return 0;
1322 if (sgpe) {
1323 blockoff = phba->lpfc_injerr_lba - lba;
1324 numblks = sg_dma_len(sgpe) /
1325 sizeof(struct scsi_dif_tuple);
1326 if (numblks < blockoff)
1327 blockoff = numblks;
1328 }
1329 }
1330
1331 /* Next check if we need to match the remote NPortID or WWPN */
1332 rdata = lpfc_rport_data_from_scsi_device(sc->device);
1333 if (rdata && rdata->pnode) {
1334 ndlp = rdata->pnode;
1335
1336 /* Make sure we have the right NPortID if one is specified */
1337 if (phba->lpfc_injerr_nportid &&
1338 (phba->lpfc_injerr_nportid != ndlp->nlp_DID))
1339 return 0;
1340
1341 /*
1342 * Make sure we have the right WWPN if one is specified.
1343 * wwn[0] should be a non-zero NAA in a good WWPN.
1344 */
1345 if (phba->lpfc_injerr_wwpn.u.wwn[0] &&
1346 (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn,
1347 sizeof(struct lpfc_name)) != 0))
1348 return 0;
1349 }
1350
1351 /* Setup a ptr to the protection data if the SCSI host provides it */
1352 if (sgpe) {
1353 src = (struct scsi_dif_tuple *)sg_virt(sgpe);
1354 src += blockoff;
1355 lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble;
1356 }
1357
1358 /* Should we change the Reference Tag */
1359 if (reftag) {
1360 if (phba->lpfc_injerr_wref_cnt) {
1361 switch (op) {
1362 case SCSI_PROT_WRITE_PASS:
1363 if (src) {
1364 /*
1365 * For WRITE_PASS, force the error
1366 * to be sent on the wire. It should
1367 * be detected by the Target.
1368 * If blockoff != 0 error will be
1369 * inserted in middle of the IO.
1370 */
1371
1372 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1373 "9076 BLKGRD: Injecting reftag error: "
1374 "write lba x%lx + x%x oldrefTag x%x\n",
1375 (unsigned long)lba, blockoff,
1376 be32_to_cpu(src->ref_tag));
1377
1378 /*
1379 * Save the old ref_tag so we can
1380 * restore it on completion.
1381 */
1382 if (lpfc_cmd) {
1383 lpfc_cmd->prot_data_type =
1384 LPFC_INJERR_REFTAG;
1385 lpfc_cmd->prot_data_segment =
1386 src;
1387 lpfc_cmd->prot_data =
1388 src->ref_tag;
1389 }
1390 src->ref_tag = cpu_to_be32(0xDEADBEEF);
1391 phba->lpfc_injerr_wref_cnt--;
1392 if (phba->lpfc_injerr_wref_cnt == 0) {
1393 phba->lpfc_injerr_nportid = 0;
1394 phba->lpfc_injerr_lba =
1395 LPFC_INJERR_LBA_OFF;
1396 memset(&phba->lpfc_injerr_wwpn,
1397 0, sizeof(struct lpfc_name));
1398 }
1399 rc = BG_ERR_TGT | BG_ERR_CHECK;
1400
1401 break;
1402 }
1403 /* Drop thru */
1404 case SCSI_PROT_WRITE_INSERT:
1405 /*
1406 * For WRITE_INSERT, force the error
1407 * to be sent on the wire. It should be
1408 * detected by the Target.
1409 */
1410 /* DEADBEEF will be the reftag on the wire */
1411 *reftag = 0xDEADBEEF;
1412 phba->lpfc_injerr_wref_cnt--;
1413 if (phba->lpfc_injerr_wref_cnt == 0) {
1414 phba->lpfc_injerr_nportid = 0;
1415 phba->lpfc_injerr_lba =
1416 LPFC_INJERR_LBA_OFF;
1417 memset(&phba->lpfc_injerr_wwpn,
1418 0, sizeof(struct lpfc_name));
1419 }
1420 rc = BG_ERR_TGT | BG_ERR_CHECK;
1421
1422 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1423 "9078 BLKGRD: Injecting reftag error: "
1424 "write lba x%lx\n", (unsigned long)lba);
1425 break;
1426 case SCSI_PROT_WRITE_STRIP:
1427 /*
1428 * For WRITE_STRIP and WRITE_PASS,
1429 * force the error on data
1430 * being copied from SLI-Host to SLI-Port.
1431 */
1432 *reftag = 0xDEADBEEF;
1433 phba->lpfc_injerr_wref_cnt--;
1434 if (phba->lpfc_injerr_wref_cnt == 0) {
1435 phba->lpfc_injerr_nportid = 0;
1436 phba->lpfc_injerr_lba =
1437 LPFC_INJERR_LBA_OFF;
1438 memset(&phba->lpfc_injerr_wwpn,
1439 0, sizeof(struct lpfc_name));
1440 }
1441 rc = BG_ERR_INIT;
1442
1443 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1444 "9077 BLKGRD: Injecting reftag error: "
1445 "write lba x%lx\n", (unsigned long)lba);
1446 break;
1447 }
1448 }
1449 if (phba->lpfc_injerr_rref_cnt) {
1450 switch (op) {
1451 case SCSI_PROT_READ_INSERT:
1452 case SCSI_PROT_READ_STRIP:
1453 case SCSI_PROT_READ_PASS:
1454 /*
1455 * For READ_STRIP and READ_PASS, force the
1456 * error on data being read off the wire. It
1457 * should force an IO error to the driver.
1458 */
1459 *reftag = 0xDEADBEEF;
1460 phba->lpfc_injerr_rref_cnt--;
1461 if (phba->lpfc_injerr_rref_cnt == 0) {
1462 phba->lpfc_injerr_nportid = 0;
1463 phba->lpfc_injerr_lba =
1464 LPFC_INJERR_LBA_OFF;
1465 memset(&phba->lpfc_injerr_wwpn,
1466 0, sizeof(struct lpfc_name));
1467 }
1468 rc = BG_ERR_INIT;
1469
1470 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1471 "9079 BLKGRD: Injecting reftag error: "
1472 "read lba x%lx\n", (unsigned long)lba);
1473 break;
1474 }
1475 }
1476 }
1477
1478 /* Should we change the Application Tag */
1479 if (apptag) {
1480 if (phba->lpfc_injerr_wapp_cnt) {
1481 switch (op) {
1482 case SCSI_PROT_WRITE_PASS:
1483 if (src) {
1484 /*
1485 * For WRITE_PASS, force the error
1486 * to be sent on the wire. It should
1487 * be detected by the Target.
1488 * If blockoff != 0 error will be
1489 * inserted in middle of the IO.
1490 */
1491
1492 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1493 "9080 BLKGRD: Injecting apptag error: "
1494 "write lba x%lx + x%x oldappTag x%x\n",
1495 (unsigned long)lba, blockoff,
1496 be16_to_cpu(src->app_tag));
1497
1498 /*
1499 * Save the old app_tag so we can
1500 * restore it on completion.
1501 */
1502 if (lpfc_cmd) {
1503 lpfc_cmd->prot_data_type =
1504 LPFC_INJERR_APPTAG;
1505 lpfc_cmd->prot_data_segment =
1506 src;
1507 lpfc_cmd->prot_data =
1508 src->app_tag;
1509 }
1510 src->app_tag = cpu_to_be16(0xDEAD);
1511 phba->lpfc_injerr_wapp_cnt--;
1512 if (phba->lpfc_injerr_wapp_cnt == 0) {
1513 phba->lpfc_injerr_nportid = 0;
1514 phba->lpfc_injerr_lba =
1515 LPFC_INJERR_LBA_OFF;
1516 memset(&phba->lpfc_injerr_wwpn,
1517 0, sizeof(struct lpfc_name));
1518 }
1519 rc = BG_ERR_TGT | BG_ERR_CHECK;
1520 break;
1521 }
1522 /* Drop thru */
1523 case SCSI_PROT_WRITE_INSERT:
1524 /*
1525 * For WRITE_INSERT, force the
1526 * error to be sent on the wire. It should be
1527 * detected by the Target.
1528 */
1529 /* DEAD will be the apptag on the wire */
1530 *apptag = 0xDEAD;
1531 phba->lpfc_injerr_wapp_cnt--;
1532 if (phba->lpfc_injerr_wapp_cnt == 0) {
1533 phba->lpfc_injerr_nportid = 0;
1534 phba->lpfc_injerr_lba =
1535 LPFC_INJERR_LBA_OFF;
1536 memset(&phba->lpfc_injerr_wwpn,
1537 0, sizeof(struct lpfc_name));
1538 }
1539 rc = BG_ERR_TGT | BG_ERR_CHECK;
1540
1541 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1542 "0813 BLKGRD: Injecting apptag error: "
1543 "write lba x%lx\n", (unsigned long)lba);
1544 break;
1545 case SCSI_PROT_WRITE_STRIP:
1546 /*
1547 * For WRITE_STRIP and WRITE_PASS,
1548 * force the error on data
1549 * being copied from SLI-Host to SLI-Port.
1550 */
1551 *apptag = 0xDEAD;
1552 phba->lpfc_injerr_wapp_cnt--;
1553 if (phba->lpfc_injerr_wapp_cnt == 0) {
1554 phba->lpfc_injerr_nportid = 0;
1555 phba->lpfc_injerr_lba =
1556 LPFC_INJERR_LBA_OFF;
1557 memset(&phba->lpfc_injerr_wwpn,
1558 0, sizeof(struct lpfc_name));
1559 }
1560 rc = BG_ERR_INIT;
1561
1562 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1563 "0812 BLKGRD: Injecting apptag error: "
1564 "write lba x%lx\n", (unsigned long)lba);
1565 break;
1566 }
1567 }
1568 if (phba->lpfc_injerr_rapp_cnt) {
1569 switch (op) {
1570 case SCSI_PROT_READ_INSERT:
1571 case SCSI_PROT_READ_STRIP:
1572 case SCSI_PROT_READ_PASS:
1573 /*
1574 * For READ_STRIP and READ_PASS, force the
1575 * error on data being read off the wire. It
1576 * should force an IO error to the driver.
1577 */
1578 *apptag = 0xDEAD;
1579 phba->lpfc_injerr_rapp_cnt--;
1580 if (phba->lpfc_injerr_rapp_cnt == 0) {
1581 phba->lpfc_injerr_nportid = 0;
1582 phba->lpfc_injerr_lba =
1583 LPFC_INJERR_LBA_OFF;
1584 memset(&phba->lpfc_injerr_wwpn,
1585 0, sizeof(struct lpfc_name));
1586 }
1587 rc = BG_ERR_INIT;
1588
1589 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1590 "0814 BLKGRD: Injecting apptag error: "
1591 "read lba x%lx\n", (unsigned long)lba);
1592 break;
1593 }
1594 }
1595 }
1596
1597
1598 /* Should we change the Guard Tag */
1599 if (new_guard) {
1600 if (phba->lpfc_injerr_wgrd_cnt) {
1601 switch (op) {
1602 case SCSI_PROT_WRITE_PASS:
1603 rc = BG_ERR_CHECK;
1604 /* Drop thru */
1605
1606 case SCSI_PROT_WRITE_INSERT:
1607 /*
1608 * For WRITE_INSERT, force the
1609 * error to be sent on the wire. It should be
1610 * detected by the Target.
1611 */
1612 phba->lpfc_injerr_wgrd_cnt--;
1613 if (phba->lpfc_injerr_wgrd_cnt == 0) {
1614 phba->lpfc_injerr_nportid = 0;
1615 phba->lpfc_injerr_lba =
1616 LPFC_INJERR_LBA_OFF;
1617 memset(&phba->lpfc_injerr_wwpn,
1618 0, sizeof(struct lpfc_name));
1619 }
1620
1621 rc |= BG_ERR_TGT | BG_ERR_SWAP;
1622 /* Signals the caller to swap CRC->CSUM */
1623
1624 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1625 "0817 BLKGRD: Injecting guard error: "
1626 "write lba x%lx\n", (unsigned long)lba);
1627 break;
1628 case SCSI_PROT_WRITE_STRIP:
1629 /*
1630 * For WRITE_STRIP and WRITE_PASS,
1631 * force the error on data
1632 * being copied from SLI-Host to SLI-Port.
1633 */
1634 phba->lpfc_injerr_wgrd_cnt--;
1635 if (phba->lpfc_injerr_wgrd_cnt == 0) {
1636 phba->lpfc_injerr_nportid = 0;
1637 phba->lpfc_injerr_lba =
1638 LPFC_INJERR_LBA_OFF;
1639 memset(&phba->lpfc_injerr_wwpn,
1640 0, sizeof(struct lpfc_name));
1641 }
1642
1643 rc = BG_ERR_INIT | BG_ERR_SWAP;
1644 /* Signals the caller to swap CRC->CSUM */
1645
1646 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1647 "0816 BLKGRD: Injecting guard error: "
1648 "write lba x%lx\n", (unsigned long)lba);
1649 break;
1650 }
1651 }
1652 if (phba->lpfc_injerr_rgrd_cnt) {
1653 switch (op) {
1654 case SCSI_PROT_READ_INSERT:
1655 case SCSI_PROT_READ_STRIP:
1656 case SCSI_PROT_READ_PASS:
1657 /*
1658 * For READ_STRIP and READ_PASS, force the
1659 * error on data being read off the wire. It
1660 * should force an IO error to the driver.
1661 */
1662 phba->lpfc_injerr_rgrd_cnt--;
1663 if (phba->lpfc_injerr_rgrd_cnt == 0) {
1664 phba->lpfc_injerr_nportid = 0;
1665 phba->lpfc_injerr_lba =
1666 LPFC_INJERR_LBA_OFF;
1667 memset(&phba->lpfc_injerr_wwpn,
1668 0, sizeof(struct lpfc_name));
1669 }
1670
1671 rc = BG_ERR_INIT | BG_ERR_SWAP;
1672 /* Signals the caller to swap CRC->CSUM */
1673
1674 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1675 "0818 BLKGRD: Injecting guard error: "
1676 "read lba x%lx\n", (unsigned long)lba);
1677 }
1678 }
1679 }
1680
1681 return rc;
1682 }
1683 #endif
1684
1685 /**
1686 * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with
1687 * the specified SCSI command.
1688 * @phba: The Hba for which this call is being executed.
1689 * @sc: The SCSI command to examine
1690 * @txopt: (out) BlockGuard operation for transmitted data
1691 * @rxopt: (out) BlockGuard operation for received data
1692 *
1693 * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
1694 *
1695 **/
1696 static int
1697 lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1698 uint8_t *txop, uint8_t *rxop)
1699 {
1700 uint8_t ret = 0;
1701
1702 if (lpfc_cmd_guard_csum(sc)) {
1703 switch (scsi_get_prot_op(sc)) {
1704 case SCSI_PROT_READ_INSERT:
1705 case SCSI_PROT_WRITE_STRIP:
1706 *rxop = BG_OP_IN_NODIF_OUT_CSUM;
1707 *txop = BG_OP_IN_CSUM_OUT_NODIF;
1708 break;
1709
1710 case SCSI_PROT_READ_STRIP:
1711 case SCSI_PROT_WRITE_INSERT:
1712 *rxop = BG_OP_IN_CRC_OUT_NODIF;
1713 *txop = BG_OP_IN_NODIF_OUT_CRC;
1714 break;
1715
1716 case SCSI_PROT_READ_PASS:
1717 case SCSI_PROT_WRITE_PASS:
1718 *rxop = BG_OP_IN_CRC_OUT_CSUM;
1719 *txop = BG_OP_IN_CSUM_OUT_CRC;
1720 break;
1721
1722 case SCSI_PROT_NORMAL:
1723 default:
1724 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1725 "9063 BLKGRD: Bad op/guard:%d/IP combination\n",
1726 scsi_get_prot_op(sc));
1727 ret = 1;
1728 break;
1729
1730 }
1731 } else {
1732 switch (scsi_get_prot_op(sc)) {
1733 case SCSI_PROT_READ_STRIP:
1734 case SCSI_PROT_WRITE_INSERT:
1735 *rxop = BG_OP_IN_CRC_OUT_NODIF;
1736 *txop = BG_OP_IN_NODIF_OUT_CRC;
1737 break;
1738
1739 case SCSI_PROT_READ_PASS:
1740 case SCSI_PROT_WRITE_PASS:
1741 *rxop = BG_OP_IN_CRC_OUT_CRC;
1742 *txop = BG_OP_IN_CRC_OUT_CRC;
1743 break;
1744
1745 case SCSI_PROT_READ_INSERT:
1746 case SCSI_PROT_WRITE_STRIP:
1747 *rxop = BG_OP_IN_NODIF_OUT_CRC;
1748 *txop = BG_OP_IN_CRC_OUT_NODIF;
1749 break;
1750
1751 case SCSI_PROT_NORMAL:
1752 default:
1753 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1754 "9075 BLKGRD: Bad op/guard:%d/CRC combination\n",
1755 scsi_get_prot_op(sc));
1756 ret = 1;
1757 break;
1758 }
1759 }
1760
1761 return ret;
1762 }
1763
1764 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1765 /**
1766 * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with
1767 * the specified SCSI command in order to force a guard tag error.
1768 * @phba: The Hba for which this call is being executed.
1769 * @sc: The SCSI command to examine
1770 * @txopt: (out) BlockGuard operation for transmitted data
1771 * @rxopt: (out) BlockGuard operation for received data
1772 *
1773 * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
1774 *
1775 **/
1776 static int
1777 lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1778 uint8_t *txop, uint8_t *rxop)
1779 {
1780 uint8_t ret = 0;
1781
1782 if (lpfc_cmd_guard_csum(sc)) {
1783 switch (scsi_get_prot_op(sc)) {
1784 case SCSI_PROT_READ_INSERT:
1785 case SCSI_PROT_WRITE_STRIP:
1786 *rxop = BG_OP_IN_NODIF_OUT_CRC;
1787 *txop = BG_OP_IN_CRC_OUT_NODIF;
1788 break;
1789
1790 case SCSI_PROT_READ_STRIP:
1791 case SCSI_PROT_WRITE_INSERT:
1792 *rxop = BG_OP_IN_CSUM_OUT_NODIF;
1793 *txop = BG_OP_IN_NODIF_OUT_CSUM;
1794 break;
1795
1796 case SCSI_PROT_READ_PASS:
1797 case SCSI_PROT_WRITE_PASS:
1798 *rxop = BG_OP_IN_CSUM_OUT_CRC;
1799 *txop = BG_OP_IN_CRC_OUT_CSUM;
1800 break;
1801
1802 case SCSI_PROT_NORMAL:
1803 default:
1804 break;
1805
1806 }
1807 } else {
1808 switch (scsi_get_prot_op(sc)) {
1809 case SCSI_PROT_READ_STRIP:
1810 case SCSI_PROT_WRITE_INSERT:
1811 *rxop = BG_OP_IN_CSUM_OUT_NODIF;
1812 *txop = BG_OP_IN_NODIF_OUT_CSUM;
1813 break;
1814
1815 case SCSI_PROT_READ_PASS:
1816 case SCSI_PROT_WRITE_PASS:
1817 *rxop = BG_OP_IN_CSUM_OUT_CSUM;
1818 *txop = BG_OP_IN_CSUM_OUT_CSUM;
1819 break;
1820
1821 case SCSI_PROT_READ_INSERT:
1822 case SCSI_PROT_WRITE_STRIP:
1823 *rxop = BG_OP_IN_NODIF_OUT_CSUM;
1824 *txop = BG_OP_IN_CSUM_OUT_NODIF;
1825 break;
1826
1827 case SCSI_PROT_NORMAL:
1828 default:
1829 break;
1830 }
1831 }
1832
1833 return ret;
1834 }
1835 #endif
1836
1837 /**
1838 * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data
1839 * @phba: The Hba for which this call is being executed.
1840 * @sc: pointer to scsi command we're working on
1841 * @bpl: pointer to buffer list for protection groups
1842 * @datacnt: number of segments of data that have been dma mapped
1843 *
1844 * This function sets up BPL buffer list for protection groups of
1845 * type LPFC_PG_TYPE_NO_DIF
1846 *
1847 * This is usually used when the HBA is instructed to generate
1848 * DIFs and insert them into data stream (or strip DIF from
1849 * incoming data stream)
1850 *
1851 * The buffer list consists of just one protection group described
1852 * below:
1853 * +-------------------------+
1854 * start of prot group --> | PDE_5 |
1855 * +-------------------------+
1856 * | PDE_6 |
1857 * +-------------------------+
1858 * | Data BDE |
1859 * +-------------------------+
1860 * |more Data BDE's ... (opt)|
1861 * +-------------------------+
1862 *
1863 *
1864 * Note: Data s/g buffers have been dma mapped
1865 *
1866 * Returns the number of BDEs added to the BPL.
1867 **/
1868 static int
1869 lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1870 struct ulp_bde64 *bpl, int datasegcnt)
1871 {
1872 struct scatterlist *sgde = NULL; /* s/g data entry */
1873 struct lpfc_pde5 *pde5 = NULL;
1874 struct lpfc_pde6 *pde6 = NULL;
1875 dma_addr_t physaddr;
1876 int i = 0, num_bde = 0, status;
1877 int datadir = sc->sc_data_direction;
1878 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1879 uint32_t rc;
1880 #endif
1881 uint32_t checking = 1;
1882 uint32_t reftag;
1883 uint8_t txop, rxop;
1884
1885 status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
1886 if (status)
1887 goto out;
1888
1889 /* extract some info from the scsi command for pde*/
1890 reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
1891
1892 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1893 rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
1894 if (rc) {
1895 if (rc & BG_ERR_SWAP)
1896 lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
1897 if (rc & BG_ERR_CHECK)
1898 checking = 0;
1899 }
1900 #endif
1901
1902 /* setup PDE5 with what we have */
1903 pde5 = (struct lpfc_pde5 *) bpl;
1904 memset(pde5, 0, sizeof(struct lpfc_pde5));
1905 bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
1906
1907 /* Endianness conversion if necessary for PDE5 */
1908 pde5->word0 = cpu_to_le32(pde5->word0);
1909 pde5->reftag = cpu_to_le32(reftag);
1910
1911 /* advance bpl and increment bde count */
1912 num_bde++;
1913 bpl++;
1914 pde6 = (struct lpfc_pde6 *) bpl;
1915
1916 /* setup PDE6 with the rest of the info */
1917 memset(pde6, 0, sizeof(struct lpfc_pde6));
1918 bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
1919 bf_set(pde6_optx, pde6, txop);
1920 bf_set(pde6_oprx, pde6, rxop);
1921
1922 /*
1923 * We only need to check the data on READs, for WRITEs
1924 * protection data is automatically generated, not checked.
1925 */
1926 if (datadir == DMA_FROM_DEVICE) {
1927 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
1928 bf_set(pde6_ce, pde6, checking);
1929 else
1930 bf_set(pde6_ce, pde6, 0);
1931
1932 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
1933 bf_set(pde6_re, pde6, checking);
1934 else
1935 bf_set(pde6_re, pde6, 0);
1936 }
1937 bf_set(pde6_ai, pde6, 1);
1938 bf_set(pde6_ae, pde6, 0);
1939 bf_set(pde6_apptagval, pde6, 0);
1940
1941 /* Endianness conversion if necessary for PDE6 */
1942 pde6->word0 = cpu_to_le32(pde6->word0);
1943 pde6->word1 = cpu_to_le32(pde6->word1);
1944 pde6->word2 = cpu_to_le32(pde6->word2);
1945
1946 /* advance bpl and increment bde count */
1947 num_bde++;
1948 bpl++;
1949
1950 /* assumption: caller has already run dma_map_sg on command data */
1951 scsi_for_each_sg(sc, sgde, datasegcnt, i) {
1952 physaddr = sg_dma_address(sgde);
1953 bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
1954 bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
1955 bpl->tus.f.bdeSize = sg_dma_len(sgde);
1956 if (datadir == DMA_TO_DEVICE)
1957 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
1958 else
1959 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
1960 bpl->tus.w = le32_to_cpu(bpl->tus.w);
1961 bpl++;
1962 num_bde++;
1963 }
1964
1965 out:
1966 return num_bde;
1967 }
1968
1969 /**
1970 * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data
1971 * @phba: The Hba for which this call is being executed.
1972 * @sc: pointer to scsi command we're working on
1973 * @bpl: pointer to buffer list for protection groups
1974 * @datacnt: number of segments of data that have been dma mapped
1975 * @protcnt: number of segment of protection data that have been dma mapped
1976 *
1977 * This function sets up BPL buffer list for protection groups of
1978 * type LPFC_PG_TYPE_DIF
1979 *
1980 * This is usually used when DIFs are in their own buffers,
1981 * separate from the data. The HBA can then by instructed
1982 * to place the DIFs in the outgoing stream. For read operations,
1983 * The HBA could extract the DIFs and place it in DIF buffers.
1984 *
1985 * The buffer list for this type consists of one or more of the
1986 * protection groups described below:
1987 * +-------------------------+
1988 * start of first prot group --> | PDE_5 |
1989 * +-------------------------+
1990 * | PDE_6 |
1991 * +-------------------------+
1992 * | PDE_7 (Prot BDE) |
1993 * +-------------------------+
1994 * | Data BDE |
1995 * +-------------------------+
1996 * |more Data BDE's ... (opt)|
1997 * +-------------------------+
1998 * start of new prot group --> | PDE_5 |
1999 * +-------------------------+
2000 * | ... |
2001 * +-------------------------+
2002 *
2003 * Note: It is assumed that both data and protection s/g buffers have been
2004 * mapped for DMA
2005 *
2006 * Returns the number of BDEs added to the BPL.
2007 **/
2008 static int
2009 lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
2010 struct ulp_bde64 *bpl, int datacnt, int protcnt)
2011 {
2012 struct scatterlist *sgde = NULL; /* s/g data entry */
2013 struct scatterlist *sgpe = NULL; /* s/g prot entry */
2014 struct lpfc_pde5 *pde5 = NULL;
2015 struct lpfc_pde6 *pde6 = NULL;
2016 struct lpfc_pde7 *pde7 = NULL;
2017 dma_addr_t dataphysaddr, protphysaddr;
2018 unsigned short curr_data = 0, curr_prot = 0;
2019 unsigned int split_offset;
2020 unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
2021 unsigned int protgrp_blks, protgrp_bytes;
2022 unsigned int remainder, subtotal;
2023 int status;
2024 int datadir = sc->sc_data_direction;
2025 unsigned char pgdone = 0, alldone = 0;
2026 unsigned blksize;
2027 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2028 uint32_t rc;
2029 #endif
2030 uint32_t checking = 1;
2031 uint32_t reftag;
2032 uint8_t txop, rxop;
2033 int num_bde = 0;
2034
2035 sgpe = scsi_prot_sglist(sc);
2036 sgde = scsi_sglist(sc);
2037
2038 if (!sgpe || !sgde) {
2039 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2040 "9020 Invalid s/g entry: data=0x%p prot=0x%p\n",
2041 sgpe, sgde);
2042 return 0;
2043 }
2044
2045 status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
2046 if (status)
2047 goto out;
2048
2049 /* extract some info from the scsi command */
2050 blksize = lpfc_cmd_blksize(sc);
2051 reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2052
2053 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2054 rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2055 if (rc) {
2056 if (rc & BG_ERR_SWAP)
2057 lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2058 if (rc & BG_ERR_CHECK)
2059 checking = 0;
2060 }
2061 #endif
2062
2063 split_offset = 0;
2064 do {
2065 /* Check to see if we ran out of space */
2066 if (num_bde >= (phba->cfg_total_seg_cnt - 2))
2067 return num_bde + 3;
2068
2069 /* setup PDE5 with what we have */
2070 pde5 = (struct lpfc_pde5 *) bpl;
2071 memset(pde5, 0, sizeof(struct lpfc_pde5));
2072 bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
2073
2074 /* Endianness conversion if necessary for PDE5 */
2075 pde5->word0 = cpu_to_le32(pde5->word0);
2076 pde5->reftag = cpu_to_le32(reftag);
2077
2078 /* advance bpl and increment bde count */
2079 num_bde++;
2080 bpl++;
2081 pde6 = (struct lpfc_pde6 *) bpl;
2082
2083 /* setup PDE6 with the rest of the info */
2084 memset(pde6, 0, sizeof(struct lpfc_pde6));
2085 bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
2086 bf_set(pde6_optx, pde6, txop);
2087 bf_set(pde6_oprx, pde6, rxop);
2088
2089 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2090 bf_set(pde6_ce, pde6, checking);
2091 else
2092 bf_set(pde6_ce, pde6, 0);
2093
2094 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2095 bf_set(pde6_re, pde6, checking);
2096 else
2097 bf_set(pde6_re, pde6, 0);
2098
2099 bf_set(pde6_ai, pde6, 1);
2100 bf_set(pde6_ae, pde6, 0);
2101 bf_set(pde6_apptagval, pde6, 0);
2102
2103 /* Endianness conversion if necessary for PDE6 */
2104 pde6->word0 = cpu_to_le32(pde6->word0);
2105 pde6->word1 = cpu_to_le32(pde6->word1);
2106 pde6->word2 = cpu_to_le32(pde6->word2);
2107
2108 /* advance bpl and increment bde count */
2109 num_bde++;
2110 bpl++;
2111
2112 /* setup the first BDE that points to protection buffer */
2113 protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
2114 protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
2115
2116 /* must be integer multiple of the DIF block length */
2117 BUG_ON(protgroup_len % 8);
2118
2119 pde7 = (struct lpfc_pde7 *) bpl;
2120 memset(pde7, 0, sizeof(struct lpfc_pde7));
2121 bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR);
2122
2123 pde7->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
2124 pde7->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));
2125
2126 protgrp_blks = protgroup_len / 8;
2127 protgrp_bytes = protgrp_blks * blksize;
2128
2129 /* check if this pde is crossing the 4K boundary; if so split */
2130 if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) {
2131 protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff);
2132 protgroup_offset += protgroup_remainder;
2133 protgrp_blks = protgroup_remainder / 8;
2134 protgrp_bytes = protgrp_blks * blksize;
2135 } else {
2136 protgroup_offset = 0;
2137 curr_prot++;
2138 }
2139
2140 num_bde++;
2141
2142 /* setup BDE's for data blocks associated with DIF data */
2143 pgdone = 0;
2144 subtotal = 0; /* total bytes processed for current prot grp */
2145 while (!pgdone) {
2146 /* Check to see if we ran out of space */
2147 if (num_bde >= phba->cfg_total_seg_cnt)
2148 return num_bde + 1;
2149
2150 if (!sgde) {
2151 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2152 "9065 BLKGRD:%s Invalid data segment\n",
2153 __func__);
2154 return 0;
2155 }
2156 bpl++;
2157 dataphysaddr = sg_dma_address(sgde) + split_offset;
2158 bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr));
2159 bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr));
2160
2161 remainder = sg_dma_len(sgde) - split_offset;
2162
2163 if ((subtotal + remainder) <= protgrp_bytes) {
2164 /* we can use this whole buffer */
2165 bpl->tus.f.bdeSize = remainder;
2166 split_offset = 0;
2167
2168 if ((subtotal + remainder) == protgrp_bytes)
2169 pgdone = 1;
2170 } else {
2171 /* must split this buffer with next prot grp */
2172 bpl->tus.f.bdeSize = protgrp_bytes - subtotal;
2173 split_offset += bpl->tus.f.bdeSize;
2174 }
2175
2176 subtotal += bpl->tus.f.bdeSize;
2177
2178 if (datadir == DMA_TO_DEVICE)
2179 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
2180 else
2181 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
2182 bpl->tus.w = le32_to_cpu(bpl->tus.w);
2183
2184 num_bde++;
2185 curr_data++;
2186
2187 if (split_offset)
2188 break;
2189
2190 /* Move to the next s/g segment if possible */
2191 sgde = sg_next(sgde);
2192
2193 }
2194
2195 if (protgroup_offset) {
2196 /* update the reference tag */
2197 reftag += protgrp_blks;
2198 bpl++;
2199 continue;
2200 }
2201
2202 /* are we done ? */
2203 if (curr_prot == protcnt) {
2204 alldone = 1;
2205 } else if (curr_prot < protcnt) {
2206 /* advance to next prot buffer */
2207 sgpe = sg_next(sgpe);
2208 bpl++;
2209
2210 /* update the reference tag */
2211 reftag += protgrp_blks;
2212 } else {
2213 /* if we're here, we have a bug */
2214 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2215 "9054 BLKGRD: bug in %s\n", __func__);
2216 }
2217
2218 } while (!alldone);
2219 out:
2220
2221 return num_bde;
2222 }
2223
2224 /**
2225 * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data
2226 * @phba: The Hba for which this call is being executed.
2227 * @sc: pointer to scsi command we're working on
2228 * @sgl: pointer to buffer list for protection groups
2229 * @datacnt: number of segments of data that have been dma mapped
2230 *
2231 * This function sets up SGL buffer list for protection groups of
2232 * type LPFC_PG_TYPE_NO_DIF
2233 *
2234 * This is usually used when the HBA is instructed to generate
2235 * DIFs and insert them into data stream (or strip DIF from
2236 * incoming data stream)
2237 *
2238 * The buffer list consists of just one protection group described
2239 * below:
2240 * +-------------------------+
2241 * start of prot group --> | DI_SEED |
2242 * +-------------------------+
2243 * | Data SGE |
2244 * +-------------------------+
2245 * |more Data SGE's ... (opt)|
2246 * +-------------------------+
2247 *
2248 *
2249 * Note: Data s/g buffers have been dma mapped
2250 *
2251 * Returns the number of SGEs added to the SGL.
2252 **/
2253 static int
2254 lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
2255 struct sli4_sge *sgl, int datasegcnt)
2256 {
2257 struct scatterlist *sgde = NULL; /* s/g data entry */
2258 struct sli4_sge_diseed *diseed = NULL;
2259 dma_addr_t physaddr;
2260 int i = 0, num_sge = 0, status;
2261 uint32_t reftag;
2262 uint8_t txop, rxop;
2263 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2264 uint32_t rc;
2265 #endif
2266 uint32_t checking = 1;
2267 uint32_t dma_len;
2268 uint32_t dma_offset = 0;
2269
2270 status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
2271 if (status)
2272 goto out;
2273
2274 /* extract some info from the scsi command for pde*/
2275 reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2276
2277 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2278 rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2279 if (rc) {
2280 if (rc & BG_ERR_SWAP)
2281 lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2282 if (rc & BG_ERR_CHECK)
2283 checking = 0;
2284 }
2285 #endif
2286
2287 /* setup DISEED with what we have */
2288 diseed = (struct sli4_sge_diseed *) sgl;
2289 memset(diseed, 0, sizeof(struct sli4_sge_diseed));
2290 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
2291
2292 /* Endianness conversion if necessary */
2293 diseed->ref_tag = cpu_to_le32(reftag);
2294 diseed->ref_tag_tran = diseed->ref_tag;
2295
2296 /*
2297 * We only need to check the data on READs, for WRITEs
2298 * protection data is automatically generated, not checked.
2299 */
2300 if (sc->sc_data_direction == DMA_FROM_DEVICE) {
2301 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2302 bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
2303 else
2304 bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
2305
2306 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2307 bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
2308 else
2309 bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
2310 }
2311
2312 /* setup DISEED with the rest of the info */
2313 bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
2314 bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
2315
2316 bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
2317 bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
2318
2319 /* Endianness conversion if necessary for DISEED */
2320 diseed->word2 = cpu_to_le32(diseed->word2);
2321 diseed->word3 = cpu_to_le32(diseed->word3);
2322
2323 /* advance bpl and increment sge count */
2324 num_sge++;
2325 sgl++;
2326
2327 /* assumption: caller has already run dma_map_sg on command data */
2328 scsi_for_each_sg(sc, sgde, datasegcnt, i) {
2329 physaddr = sg_dma_address(sgde);
2330 dma_len = sg_dma_len(sgde);
2331 sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
2332 sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
2333 if ((i + 1) == datasegcnt)
2334 bf_set(lpfc_sli4_sge_last, sgl, 1);
2335 else
2336 bf_set(lpfc_sli4_sge_last, sgl, 0);
2337 bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
2338 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
2339
2340 sgl->sge_len = cpu_to_le32(dma_len);
2341 dma_offset += dma_len;
2342
2343 sgl++;
2344 num_sge++;
2345 }
2346
2347 out:
2348 return num_sge;
2349 }
2350
2351 /**
2352 * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data
2353 * @phba: The Hba for which this call is being executed.
2354 * @sc: pointer to scsi command we're working on
2355 * @sgl: pointer to buffer list for protection groups
2356 * @datacnt: number of segments of data that have been dma mapped
2357 * @protcnt: number of segment of protection data that have been dma mapped
2358 *
2359 * This function sets up SGL buffer list for protection groups of
2360 * type LPFC_PG_TYPE_DIF
2361 *
2362 * This is usually used when DIFs are in their own buffers,
2363 * separate from the data. The HBA can then by instructed
2364 * to place the DIFs in the outgoing stream. For read operations,
2365 * The HBA could extract the DIFs and place it in DIF buffers.
2366 *
2367 * The buffer list for this type consists of one or more of the
2368 * protection groups described below:
2369 * +-------------------------+
2370 * start of first prot group --> | DISEED |
2371 * +-------------------------+
2372 * | DIF (Prot SGE) |
2373 * +-------------------------+
2374 * | Data SGE |
2375 * +-------------------------+
2376 * |more Data SGE's ... (opt)|
2377 * +-------------------------+
2378 * start of new prot group --> | DISEED |
2379 * +-------------------------+
2380 * | ... |
2381 * +-------------------------+
2382 *
2383 * Note: It is assumed that both data and protection s/g buffers have been
2384 * mapped for DMA
2385 *
2386 * Returns the number of SGEs added to the SGL.
2387 **/
2388 static int
2389 lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
2390 struct sli4_sge *sgl, int datacnt, int protcnt)
2391 {
2392 struct scatterlist *sgde = NULL; /* s/g data entry */
2393 struct scatterlist *sgpe = NULL; /* s/g prot entry */
2394 struct sli4_sge_diseed *diseed = NULL;
2395 dma_addr_t dataphysaddr, protphysaddr;
2396 unsigned short curr_data = 0, curr_prot = 0;
2397 unsigned int split_offset;
2398 unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
2399 unsigned int protgrp_blks, protgrp_bytes;
2400 unsigned int remainder, subtotal;
2401 int status;
2402 unsigned char pgdone = 0, alldone = 0;
2403 unsigned blksize;
2404 uint32_t reftag;
2405 uint8_t txop, rxop;
2406 uint32_t dma_len;
2407 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2408 uint32_t rc;
2409 #endif
2410 uint32_t checking = 1;
2411 uint32_t dma_offset = 0;
2412 int num_sge = 0;
2413
2414 sgpe = scsi_prot_sglist(sc);
2415 sgde = scsi_sglist(sc);
2416
2417 if (!sgpe || !sgde) {
2418 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2419 "9082 Invalid s/g entry: data=0x%p prot=0x%p\n",
2420 sgpe, sgde);
2421 return 0;
2422 }
2423
2424 status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
2425 if (status)
2426 goto out;
2427
2428 /* extract some info from the scsi command */
2429 blksize = lpfc_cmd_blksize(sc);
2430 reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2431
2432 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2433 rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2434 if (rc) {
2435 if (rc & BG_ERR_SWAP)
2436 lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2437 if (rc & BG_ERR_CHECK)
2438 checking = 0;
2439 }
2440 #endif
2441
2442 split_offset = 0;
2443 do {
2444 /* Check to see if we ran out of space */
2445 if (num_sge >= (phba->cfg_total_seg_cnt - 2))
2446 return num_sge + 3;
2447
2448 /* setup DISEED with what we have */
2449 diseed = (struct sli4_sge_diseed *) sgl;
2450 memset(diseed, 0, sizeof(struct sli4_sge_diseed));
2451 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
2452
2453 /* Endianness conversion if necessary */
2454 diseed->ref_tag = cpu_to_le32(reftag);
2455 diseed->ref_tag_tran = diseed->ref_tag;
2456
2457 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) {
2458 bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
2459
2460 } else {
2461 bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
2462 /*
2463 * When in this mode, the hardware will replace
2464 * the guard tag from the host with a
2465 * newly generated good CRC for the wire.
2466 * Switch to raw mode here to avoid this
2467 * behavior. What the host sends gets put on the wire.
2468 */
2469 if (txop == BG_OP_IN_CRC_OUT_CRC) {
2470 txop = BG_OP_RAW_MODE;
2471 rxop = BG_OP_RAW_MODE;
2472 }
2473 }
2474
2475
2476 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2477 bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
2478 else
2479 bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
2480
2481 /* setup DISEED with the rest of the info */
2482 bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
2483 bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
2484
2485 bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
2486 bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
2487
2488 /* Endianness conversion if necessary for DISEED */
2489 diseed->word2 = cpu_to_le32(diseed->word2);
2490 diseed->word3 = cpu_to_le32(diseed->word3);
2491
2492 /* advance sgl and increment bde count */
2493 num_sge++;
2494 sgl++;
2495
2496 /* setup the first BDE that points to protection buffer */
2497 protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
2498 protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
2499
2500 /* must be integer multiple of the DIF block length */
2501 BUG_ON(protgroup_len % 8);
2502
2503 /* Now setup DIF SGE */
2504 sgl->word2 = 0;
2505 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF);
2506 sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr));
2507 sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr));
2508 sgl->word2 = cpu_to_le32(sgl->word2);
2509
2510 protgrp_blks = protgroup_len / 8;
2511 protgrp_bytes = protgrp_blks * blksize;
2512
2513 /* check if DIF SGE is crossing the 4K boundary; if so split */
2514 if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) {
2515 protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff);
2516 protgroup_offset += protgroup_remainder;
2517 protgrp_blks = protgroup_remainder / 8;
2518 protgrp_bytes = protgrp_blks * blksize;
2519 } else {
2520 protgroup_offset = 0;
2521 curr_prot++;
2522 }
2523
2524 num_sge++;
2525
2526 /* setup SGE's for data blocks associated with DIF data */
2527 pgdone = 0;
2528 subtotal = 0; /* total bytes processed for current prot grp */
2529 while (!pgdone) {
2530 /* Check to see if we ran out of space */
2531 if (num_sge >= phba->cfg_total_seg_cnt)
2532 return num_sge + 1;
2533
2534 if (!sgde) {
2535 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2536 "9086 BLKGRD:%s Invalid data segment\n",
2537 __func__);
2538 return 0;
2539 }
2540 sgl++;
2541 dataphysaddr = sg_dma_address(sgde) + split_offset;
2542
2543 remainder = sg_dma_len(sgde) - split_offset;
2544
2545 if ((subtotal + remainder) <= protgrp_bytes) {
2546 /* we can use this whole buffer */
2547 dma_len = remainder;
2548 split_offset = 0;
2549
2550 if ((subtotal + remainder) == protgrp_bytes)
2551 pgdone = 1;
2552 } else {
2553 /* must split this buffer with next prot grp */
2554 dma_len = protgrp_bytes - subtotal;
2555 split_offset += dma_len;
2556 }
2557
2558 subtotal += dma_len;
2559
2560 sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr));
2561 sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr));
2562 bf_set(lpfc_sli4_sge_last, sgl, 0);
2563 bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
2564 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
2565
2566 sgl->sge_len = cpu_to_le32(dma_len);
2567 dma_offset += dma_len;
2568
2569 num_sge++;
2570 curr_data++;
2571
2572 if (split_offset)
2573 break;
2574
2575 /* Move to the next s/g segment if possible */
2576 sgde = sg_next(sgde);
2577 }
2578
2579 if (protgroup_offset) {
2580 /* update the reference tag */
2581 reftag += protgrp_blks;
2582 sgl++;
2583 continue;
2584 }
2585
2586 /* are we done ? */
2587 if (curr_prot == protcnt) {
2588 bf_set(lpfc_sli4_sge_last, sgl, 1);
2589 alldone = 1;
2590 } else if (curr_prot < protcnt) {
2591 /* advance to next prot buffer */
2592 sgpe = sg_next(sgpe);
2593 sgl++;
2594
2595 /* update the reference tag */
2596 reftag += protgrp_blks;
2597 } else {
2598 /* if we're here, we have a bug */
2599 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2600 "9085 BLKGRD: bug in %s\n", __func__);
2601 }
2602
2603 } while (!alldone);
2604
2605 out:
2606
2607 return num_sge;
2608 }
2609
2610 /**
2611 * lpfc_prot_group_type - Get prtotection group type of SCSI command
2612 * @phba: The Hba for which this call is being executed.
2613 * @sc: pointer to scsi command we're working on
2614 *
2615 * Given a SCSI command that supports DIF, determine composition of protection
2616 * groups involved in setting up buffer lists
2617 *
2618 * Returns: Protection group type (with or without DIF)
2619 *
2620 **/
2621 static int
2622 lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
2623 {
2624 int ret = LPFC_PG_TYPE_INVALID;
2625 unsigned char op = scsi_get_prot_op(sc);
2626
2627 switch (op) {
2628 case SCSI_PROT_READ_STRIP:
2629 case SCSI_PROT_WRITE_INSERT:
2630 ret = LPFC_PG_TYPE_NO_DIF;
2631 break;
2632 case SCSI_PROT_READ_INSERT:
2633 case SCSI_PROT_WRITE_STRIP:
2634 case SCSI_PROT_READ_PASS:
2635 case SCSI_PROT_WRITE_PASS:
2636 ret = LPFC_PG_TYPE_DIF_BUF;
2637 break;
2638 default:
2639 if (phba)
2640 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2641 "9021 Unsupported protection op:%d\n",
2642 op);
2643 break;
2644 }
2645 return ret;
2646 }
2647
2648 /**
2649 * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
2650 * @phba: The Hba for which this call is being executed.
2651 * @lpfc_cmd: The scsi buffer which is going to be adjusted.
2652 *
2653 * Adjust the data length to account for how much data
2654 * is actually on the wire.
2655 *
2656 * returns the adjusted data length
2657 **/
2658 static int
2659 lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
2660 struct lpfc_scsi_buf *lpfc_cmd)
2661 {
2662 struct scsi_cmnd *sc = lpfc_cmd->pCmd;
2663 int fcpdl;
2664
2665 fcpdl = scsi_bufflen(sc);
2666
2667 /* Check if there is protection data on the wire */
2668 if (sc->sc_data_direction == DMA_FROM_DEVICE) {
2669 /* Read check for protection data */
2670 if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT)
2671 return fcpdl;
2672
2673 } else {
2674 /* Write check for protection data */
2675 if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP)
2676 return fcpdl;
2677 }
2678
2679 /*
2680 * If we are in DIF Type 1 mode every data block has a 8 byte
2681 * DIF (trailer) attached to it. Must ajust FCP data length
2682 * to account for the protection data.
2683 */
2684 fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8;
2685
2686 return fcpdl;
2687 }
2688
2689 /**
2690 * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
2691 * @phba: The Hba for which this call is being executed.
2692 * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
2693 *
2694 * This is the protection/DIF aware version of
2695 * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
2696 * two functions eventually, but for now, it's here
2697 **/
2698 static int
2699 lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
2700 struct lpfc_scsi_buf *lpfc_cmd)
2701 {
2702 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
2703 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
2704 struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
2705 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
2706 uint32_t num_bde = 0;
2707 int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
2708 int prot_group_type = 0;
2709 int fcpdl;
2710
2711 /*
2712 * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
2713 * fcp_rsp regions to the first data bde entry
2714 */
2715 bpl += 2;
2716 if (scsi_sg_count(scsi_cmnd)) {
2717 /*
2718 * The driver stores the segment count returned from pci_map_sg
2719 * because this a count of dma-mappings used to map the use_sg
2720 * pages. They are not guaranteed to be the same for those
2721 * architectures that implement an IOMMU.
2722 */
2723 datasegcnt = dma_map_sg(&phba->pcidev->dev,
2724 scsi_sglist(scsi_cmnd),
2725 scsi_sg_count(scsi_cmnd), datadir);
2726 if (unlikely(!datasegcnt))
2727 return 1;
2728
2729 lpfc_cmd->seg_cnt = datasegcnt;
2730
2731 /* First check if data segment count from SCSI Layer is good */
2732 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
2733 goto err;
2734
2735 prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
2736
2737 switch (prot_group_type) {
2738 case LPFC_PG_TYPE_NO_DIF:
2739
2740 /* Here we need to add a PDE5 and PDE6 to the count */
2741 if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt)
2742 goto err;
2743
2744 num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
2745 datasegcnt);
2746 /* we should have 2 or more entries in buffer list */
2747 if (num_bde < 2)
2748 goto err;
2749 break;
2750
2751 case LPFC_PG_TYPE_DIF_BUF:
2752 /*
2753 * This type indicates that protection buffers are
2754 * passed to the driver, so that needs to be prepared
2755 * for DMA
2756 */
2757 protsegcnt = dma_map_sg(&phba->pcidev->dev,
2758 scsi_prot_sglist(scsi_cmnd),
2759 scsi_prot_sg_count(scsi_cmnd), datadir);
2760 if (unlikely(!protsegcnt)) {
2761 scsi_dma_unmap(scsi_cmnd);
2762 return 1;
2763 }
2764
2765 lpfc_cmd->prot_seg_cnt = protsegcnt;
2766
2767 /*
2768 * There is a minimun of 4 BPLs used for every
2769 * protection data segment.
2770 */
2771 if ((lpfc_cmd->prot_seg_cnt * 4) >
2772 (phba->cfg_total_seg_cnt - 2))
2773 goto err;
2774
2775 num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
2776 datasegcnt, protsegcnt);
2777 /* we should have 3 or more entries in buffer list */
2778 if ((num_bde < 3) ||
2779 (num_bde > phba->cfg_total_seg_cnt))
2780 goto err;
2781 break;
2782
2783 case LPFC_PG_TYPE_INVALID:
2784 default:
2785 scsi_dma_unmap(scsi_cmnd);
2786 lpfc_cmd->seg_cnt = 0;
2787
2788 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2789 "9022 Unexpected protection group %i\n",
2790 prot_group_type);
2791 return 1;
2792 }
2793 }
2794
2795 /*
2796 * Finish initializing those IOCB fields that are dependent on the
2797 * scsi_cmnd request_buffer. Note that the bdeSize is explicitly
2798 * reinitialized since all iocb memory resources are used many times
2799 * for transmit, receive, and continuation bpl's.
2800 */
2801 iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
2802 iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64));
2803 iocb_cmd->ulpBdeCount = 1;
2804 iocb_cmd->ulpLe = 1;
2805
2806 fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
2807 fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
2808
2809 /*
2810 * Due to difference in data length between DIF/non-DIF paths,
2811 * we need to set word 4 of IOCB here
2812 */
2813 iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
2814
2815 return 0;
2816 err:
2817 if (lpfc_cmd->seg_cnt)
2818 scsi_dma_unmap(scsi_cmnd);
2819 if (lpfc_cmd->prot_seg_cnt)
2820 dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
2821 scsi_prot_sg_count(scsi_cmnd),
2822 scsi_cmnd->sc_data_direction);
2823
2824 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2825 "9023 Cannot setup S/G List for HBA"
2826 "IO segs %d/%d BPL %d SCSI %d: %d %d\n",
2827 lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
2828 phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
2829 prot_group_type, num_bde);
2830
2831 lpfc_cmd->seg_cnt = 0;
2832 lpfc_cmd->prot_seg_cnt = 0;
2833 return 1;
2834 }
2835
2836 /*
2837 * This function calcuates the T10 DIF guard tag
2838 * on the specified data using a CRC algorithmn
2839 * using crc_t10dif.
2840 */
2841 static uint16_t
2842 lpfc_bg_crc(uint8_t *data, int count)
2843 {
2844 uint16_t crc = 0;
2845 uint16_t x;
2846
2847 crc = crc_t10dif(data, count);
2848 x = cpu_to_be16(crc);
2849 return x;
2850 }
2851
2852 /*
2853 * This function calcuates the T10 DIF guard tag
2854 * on the specified data using a CSUM algorithmn
2855 * using ip_compute_csum.
2856 */
2857 static uint16_t
2858 lpfc_bg_csum(uint8_t *data, int count)
2859 {
2860 uint16_t ret;
2861
2862 ret = ip_compute_csum(data, count);
2863 return ret;
2864 }
2865
2866 /*
2867 * This function examines the protection data to try to determine
2868 * what type of T10-DIF error occurred.
2869 */
2870 static void
2871 lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
2872 {
2873 struct scatterlist *sgpe; /* s/g prot entry */
2874 struct scatterlist *sgde; /* s/g data entry */
2875 struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
2876 struct scsi_dif_tuple *src = NULL;
2877 uint8_t *data_src = NULL;
2878 uint16_t guard_tag;
2879 uint16_t start_app_tag, app_tag;
2880 uint32_t start_ref_tag, ref_tag;
2881 int prot, protsegcnt;
2882 int err_type, len, data_len;
2883 int chk_ref, chk_app, chk_guard;
2884 uint16_t sum;
2885 unsigned blksize;
2886
2887 err_type = BGS_GUARD_ERR_MASK;
2888 sum = 0;
2889 guard_tag = 0;
2890
2891 /* First check to see if there is protection data to examine */
2892 prot = scsi_get_prot_op(cmd);
2893 if ((prot == SCSI_PROT_READ_STRIP) ||
2894 (prot == SCSI_PROT_WRITE_INSERT) ||
2895 (prot == SCSI_PROT_NORMAL))
2896 goto out;
2897
2898 /* Currently the driver just supports ref_tag and guard_tag checking */
2899 chk_ref = 1;
2900 chk_app = 0;
2901 chk_guard = 0;
2902
2903 /* Setup a ptr to the protection data provided by the SCSI host */
2904 sgpe = scsi_prot_sglist(cmd);
2905 protsegcnt = lpfc_cmd->prot_seg_cnt;
2906
2907 if (sgpe && protsegcnt) {
2908
2909 /*
2910 * We will only try to verify guard tag if the segment
2911 * data length is a multiple of the blksize.
2912 */
2913 sgde = scsi_sglist(cmd);
2914 blksize = lpfc_cmd_blksize(cmd);
2915 data_src = (uint8_t *)sg_virt(sgde);
2916 data_len = sgde->length;
2917 if ((data_len & (blksize - 1)) == 0)
2918 chk_guard = 1;
2919
2920 src = (struct scsi_dif_tuple *)sg_virt(sgpe);
2921 start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
2922 start_app_tag = src->app_tag;
2923 len = sgpe->length;
2924 while (src && protsegcnt) {
2925 while (len) {
2926
2927 /*
2928 * First check to see if a protection data
2929 * check is valid
2930 */
2931 if ((src->ref_tag == 0xffffffff) ||
2932 (src->app_tag == 0xffff)) {
2933 start_ref_tag++;
2934 goto skipit;
2935 }
2936
2937 /* First Guard Tag checking */
2938 if (chk_guard) {
2939 guard_tag = src->guard_tag;
2940 if (lpfc_cmd_guard_csum(cmd))
2941 sum = lpfc_bg_csum(data_src,
2942 blksize);
2943 else
2944 sum = lpfc_bg_crc(data_src,
2945 blksize);
2946 if ((guard_tag != sum)) {
2947 err_type = BGS_GUARD_ERR_MASK;
2948 goto out;
2949 }
2950 }
2951
2952 /* Reference Tag checking */
2953 ref_tag = be32_to_cpu(src->ref_tag);
2954 if (chk_ref && (ref_tag != start_ref_tag)) {
2955 err_type = BGS_REFTAG_ERR_MASK;
2956 goto out;
2957 }
2958 start_ref_tag++;
2959
2960 /* App Tag checking */
2961 app_tag = src->app_tag;
2962 if (chk_app && (app_tag != start_app_tag)) {
2963 err_type = BGS_APPTAG_ERR_MASK;
2964 goto out;
2965 }
2966 skipit:
2967 len -= sizeof(struct scsi_dif_tuple);
2968 if (len < 0)
2969 len = 0;
2970 src++;
2971
2972 data_src += blksize;
2973 data_len -= blksize;
2974
2975 /*
2976 * Are we at the end of the Data segment?
2977 * The data segment is only used for Guard
2978 * tag checking.
2979 */
2980 if (chk_guard && (data_len == 0)) {
2981 chk_guard = 0;
2982 sgde = sg_next(sgde);
2983 if (!sgde)
2984 goto out;
2985
2986 data_src = (uint8_t *)sg_virt(sgde);
2987 data_len = sgde->length;
2988 if ((data_len & (blksize - 1)) == 0)
2989 chk_guard = 1;
2990 }
2991 }
2992
2993 /* Goto the next Protection data segment */
2994 sgpe = sg_next(sgpe);
2995 if (sgpe) {
2996 src = (struct scsi_dif_tuple *)sg_virt(sgpe);
2997 len = sgpe->length;
2998 } else {
2999 src = NULL;
3000 }
3001 protsegcnt--;
3002 }
3003 }
3004 out:
3005 if (err_type == BGS_GUARD_ERR_MASK) {
3006 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3007 0x10, 0x1);
3008 cmd->result = DRIVER_SENSE << 24
3009 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3010 phba->bg_guard_err_cnt++;
3011 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3012 "9069 BLKGRD: LBA %lx grd_tag error %x != %x\n",
3013 (unsigned long)scsi_get_lba(cmd),
3014 sum, guard_tag);
3015
3016 } else if (err_type == BGS_REFTAG_ERR_MASK) {
3017 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3018 0x10, 0x3);
3019 cmd->result = DRIVER_SENSE << 24
3020 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3021
3022 phba->bg_reftag_err_cnt++;
3023 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3024 "9066 BLKGRD: LBA %lx ref_tag error %x != %x\n",
3025 (unsigned long)scsi_get_lba(cmd),
3026 ref_tag, start_ref_tag);
3027
3028 } else if (err_type == BGS_APPTAG_ERR_MASK) {
3029 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3030 0x10, 0x2);
3031 cmd->result = DRIVER_SENSE << 24
3032 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3033
3034 phba->bg_apptag_err_cnt++;
3035 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3036 "9041 BLKGRD: LBA %lx app_tag error %x != %x\n",
3037 (unsigned long)scsi_get_lba(cmd),
3038 app_tag, start_app_tag);
3039 }
3040 }
3041
3042
3043 /*
3044 * This function checks for BlockGuard errors detected by
3045 * the HBA. In case of errors, the ASC/ASCQ fields in the
3046 * sense buffer will be set accordingly, paired with
3047 * ILLEGAL_REQUEST to signal to the kernel that the HBA
3048 * detected corruption.
3049 *
3050 * Returns:
3051 * 0 - No error found
3052 * 1 - BlockGuard error found
3053 * -1 - Internal error (bad profile, ...etc)
3054 */
3055 static int
3056 lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
3057 struct lpfc_iocbq *pIocbOut)
3058 {
3059 struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
3060 struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
3061 int ret = 0;
3062 uint32_t bghm = bgf->bghm;
3063 uint32_t bgstat = bgf->bgstat;
3064 uint64_t failing_sector = 0;
3065
3066 spin_lock(&_dump_buf_lock);
3067 if (!_dump_buf_done) {
3068 lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9070 BLKGRD: Saving"
3069 " Data for %u blocks to debugfs\n",
3070 (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
3071 lpfc_debug_save_data(phba, cmd);
3072
3073 /* If we have a prot sgl, save the DIF buffer */
3074 if (lpfc_prot_group_type(phba, cmd) ==
3075 LPFC_PG_TYPE_DIF_BUF) {
3076 lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9071 BLKGRD: "
3077 "Saving DIF for %u blocks to debugfs\n",
3078 (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
3079 lpfc_debug_save_dif(phba, cmd);
3080 }
3081
3082 _dump_buf_done = 1;
3083 }
3084 spin_unlock(&_dump_buf_lock);
3085
3086 if (lpfc_bgs_get_invalid_prof(bgstat)) {
3087 cmd->result = ScsiResult(DID_ERROR, 0);
3088 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3089 "9072 BLKGRD: Invalid BG Profile in cmd"
3090 " 0x%x lba 0x%llx blk cnt 0x%x "
3091 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3092 (unsigned long long)scsi_get_lba(cmd),
3093 blk_rq_sectors(cmd->request), bgstat, bghm);
3094 ret = (-1);
3095 goto out;
3096 }
3097
3098 if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
3099 cmd->result = ScsiResult(DID_ERROR, 0);
3100 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3101 "9073 BLKGRD: Invalid BG PDIF Block in cmd"
3102 " 0x%x lba 0x%llx blk cnt 0x%x "
3103 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3104 (unsigned long long)scsi_get_lba(cmd),
3105 blk_rq_sectors(cmd->request), bgstat, bghm);
3106 ret = (-1);
3107 goto out;
3108 }
3109
3110 if (lpfc_bgs_get_guard_err(bgstat)) {
3111 ret = 1;
3112
3113 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3114 0x10, 0x1);
3115 cmd->result = DRIVER_SENSE << 24
3116 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3117 phba->bg_guard_err_cnt++;
3118 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3119 "9055 BLKGRD: Guard Tag error in cmd"
3120 " 0x%x lba 0x%llx blk cnt 0x%x "
3121 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3122 (unsigned long long)scsi_get_lba(cmd),
3123 blk_rq_sectors(cmd->request), bgstat, bghm);
3124 }
3125
3126 if (lpfc_bgs_get_reftag_err(bgstat)) {
3127 ret = 1;
3128
3129 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3130 0x10, 0x3);
3131 cmd->result = DRIVER_SENSE << 24
3132 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3133
3134 phba->bg_reftag_err_cnt++;
3135 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3136 "9056 BLKGRD: Ref Tag error in cmd"
3137 " 0x%x lba 0x%llx blk cnt 0x%x "
3138 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3139 (unsigned long long)scsi_get_lba(cmd),
3140 blk_rq_sectors(cmd->request), bgstat, bghm);
3141 }
3142
3143 if (lpfc_bgs_get_apptag_err(bgstat)) {
3144 ret = 1;
3145
3146 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3147 0x10, 0x2);
3148 cmd->result = DRIVER_SENSE << 24
3149 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3150
3151 phba->bg_apptag_err_cnt++;
3152 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3153 "9061 BLKGRD: App Tag error in cmd"
3154 " 0x%x lba 0x%llx blk cnt 0x%x "
3155 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3156 (unsigned long long)scsi_get_lba(cmd),
3157 blk_rq_sectors(cmd->request), bgstat, bghm);
3158 }
3159
3160 if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
3161 /*
3162 * setup sense data descriptor 0 per SPC-4 as an information
3163 * field, and put the failing LBA in it.
3164 * This code assumes there was also a guard/app/ref tag error
3165 * indication.
3166 */
3167 cmd->sense_buffer[7] = 0xc; /* Additional sense length */
3168 cmd->sense_buffer[8] = 0; /* Information descriptor type */
3169 cmd->sense_buffer[9] = 0xa; /* Additional descriptor length */
3170 cmd->sense_buffer[10] = 0x80; /* Validity bit */
3171
3172 /* bghm is a "on the wire" FC frame based count */
3173 switch (scsi_get_prot_op(cmd)) {
3174 case SCSI_PROT_READ_INSERT:
3175 case SCSI_PROT_WRITE_STRIP:
3176 bghm /= cmd->device->sector_size;
3177 break;
3178 case SCSI_PROT_READ_STRIP:
3179 case SCSI_PROT_WRITE_INSERT:
3180 case SCSI_PROT_READ_PASS:
3181 case SCSI_PROT_WRITE_PASS:
3182 bghm /= (cmd->device->sector_size +
3183 sizeof(struct scsi_dif_tuple));
3184 break;
3185 }
3186
3187 failing_sector = scsi_get_lba(cmd);
3188 failing_sector += bghm;
3189
3190 /* Descriptor Information */
3191 put_unaligned_be64(failing_sector, &cmd->sense_buffer[12]);
3192 }
3193
3194 if (!ret) {
3195 /* No error was reported - problem in FW? */
3196 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3197 "9057 BLKGRD: Unknown error in cmd"
3198 " 0x%x lba 0x%llx blk cnt 0x%x "
3199 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3200 (unsigned long long)scsi_get_lba(cmd),
3201 blk_rq_sectors(cmd->request), bgstat, bghm);
3202
3203 /* Calcuate what type of error it was */
3204 lpfc_calc_bg_err(phba, lpfc_cmd);
3205 }
3206 out:
3207 return ret;
3208 }
3209
3210 /**
3211 * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
3212 * @phba: The Hba for which this call is being executed.
3213 * @lpfc_cmd: The scsi buffer which is going to be mapped.
3214 *
3215 * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
3216 * field of @lpfc_cmd for device with SLI-4 interface spec.
3217 *
3218 * Return codes:
3219 * 1 - Error
3220 * 0 - Success
3221 **/
3222 static int
3223 lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
3224 {
3225 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
3226 struct scatterlist *sgel = NULL;
3227 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
3228 struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
3229 struct sli4_sge *first_data_sgl;
3230 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
3231 dma_addr_t physaddr;
3232 uint32_t num_bde = 0;
3233 uint32_t dma_len;
3234 uint32_t dma_offset = 0;
3235 int nseg;
3236 struct ulp_bde64 *bde;
3237
3238 /*
3239 * There are three possibilities here - use scatter-gather segment, use
3240 * the single mapping, or neither. Start the lpfc command prep by
3241 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
3242 * data bde entry.
3243 */
3244 if (scsi_sg_count(scsi_cmnd)) {
3245 /*
3246 * The driver stores the segment count returned from pci_map_sg
3247 * because this a count of dma-mappings used to map the use_sg
3248 * pages. They are not guaranteed to be the same for those
3249 * architectures that implement an IOMMU.
3250 */
3251
3252 nseg = scsi_dma_map(scsi_cmnd);
3253 if (unlikely(nseg <= 0))
3254 return 1;
3255 sgl += 1;
3256 /* clear the last flag in the fcp_rsp map entry */
3257 sgl->word2 = le32_to_cpu(sgl->word2);
3258 bf_set(lpfc_sli4_sge_last, sgl, 0);
3259 sgl->word2 = cpu_to_le32(sgl->word2);
3260 sgl += 1;
3261 first_data_sgl = sgl;
3262 lpfc_cmd->seg_cnt = nseg;
3263 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
3264 lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:"
3265 " %s: Too many sg segments from "
3266 "dma_map_sg. Config %d, seg_cnt %d\n",
3267 __func__, phba->cfg_sg_seg_cnt,
3268 lpfc_cmd->seg_cnt);
3269 lpfc_cmd->seg_cnt = 0;
3270 scsi_dma_unmap(scsi_cmnd);
3271 return 1;
3272 }
3273
3274 /*
3275 * The driver established a maximum scatter-gather segment count
3276 * during probe that limits the number of sg elements in any
3277 * single scsi command. Just run through the seg_cnt and format
3278 * the sge's.
3279 * When using SLI-3 the driver will try to fit all the BDEs into
3280 * the IOCB. If it can't then the BDEs get added to a BPL as it
3281 * does for SLI-2 mode.
3282 */
3283 scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
3284 physaddr = sg_dma_address(sgel);
3285 dma_len = sg_dma_len(sgel);
3286 sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
3287 sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
3288 sgl->word2 = le32_to_cpu(sgl->word2);
3289 if ((num_bde + 1) == nseg)
3290 bf_set(lpfc_sli4_sge_last, sgl, 1);
3291 else
3292 bf_set(lpfc_sli4_sge_last, sgl, 0);
3293 bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
3294 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
3295 sgl->word2 = cpu_to_le32(sgl->word2);
3296 sgl->sge_len = cpu_to_le32(dma_len);
3297 dma_offset += dma_len;
3298 sgl++;
3299 }
3300 /* setup the performance hint (first data BDE) if enabled */
3301 if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
3302 bde = (struct ulp_bde64 *)
3303 &(iocb_cmd->unsli3.sli3Words[5]);
3304 bde->addrLow = first_data_sgl->addr_lo;
3305 bde->addrHigh = first_data_sgl->addr_hi;
3306 bde->tus.f.bdeSize =
3307 le32_to_cpu(first_data_sgl->sge_len);
3308 bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
3309 bde->tus.w = cpu_to_le32(bde->tus.w);
3310 }
3311 } else {
3312 sgl += 1;
3313 /* clear the last flag in the fcp_rsp map entry */
3314 sgl->word2 = le32_to_cpu(sgl->word2);
3315 bf_set(lpfc_sli4_sge_last, sgl, 1);
3316 sgl->word2 = cpu_to_le32(sgl->word2);
3317 }
3318
3319 /*
3320 * Finish initializing those IOCB fields that are dependent on the
3321 * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
3322 * explicitly reinitialized.
3323 * all iocb memory resources are reused.
3324 */
3325 fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
3326
3327 /*
3328 * Due to difference in data length between DIF/non-DIF paths,
3329 * we need to set word 4 of IOCB here
3330 */
3331 iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
3332
3333 /*
3334 * If the OAS driver feature is enabled and the lun is enabled for
3335 * OAS, set the oas iocb related flags.
3336 */
3337 if ((phba->cfg_fof) && ((struct lpfc_device_data *)
3338 scsi_cmnd->device->hostdata)->oas_enabled)
3339 lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
3340 return 0;
3341 }
3342
3343 /**
3344 * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
3345 * @phba: The Hba for which this call is being executed.
3346 * @lpfc_cmd: The scsi buffer which is going to be mapped.
3347 *
3348 * This is the protection/DIF aware version of
3349 * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
3350 * two functions eventually, but for now, it's here
3351 **/
3352 static int
3353 lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
3354 struct lpfc_scsi_buf *lpfc_cmd)
3355 {
3356 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
3357 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
3358 struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
3359 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
3360 uint32_t num_sge = 0;
3361 int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
3362 int prot_group_type = 0;
3363 int fcpdl;
3364
3365 /*
3366 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
3367 * fcp_rsp regions to the first data sge entry
3368 */
3369 if (scsi_sg_count(scsi_cmnd)) {
3370 /*
3371 * The driver stores the segment count returned from pci_map_sg
3372 * because this a count of dma-mappings used to map the use_sg
3373 * pages. They are not guaranteed to be the same for those
3374 * architectures that implement an IOMMU.
3375 */
3376 datasegcnt = dma_map_sg(&phba->pcidev->dev,
3377 scsi_sglist(scsi_cmnd),
3378 scsi_sg_count(scsi_cmnd), datadir);
3379 if (unlikely(!datasegcnt))
3380 return 1;
3381
3382 sgl += 1;
3383 /* clear the last flag in the fcp_rsp map entry */
3384 sgl->word2 = le32_to_cpu(sgl->word2);
3385 bf_set(lpfc_sli4_sge_last, sgl, 0);
3386 sgl->word2 = cpu_to_le32(sgl->word2);
3387
3388 sgl += 1;
3389 lpfc_cmd->seg_cnt = datasegcnt;
3390
3391 /* First check if data segment count from SCSI Layer is good */
3392 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
3393 goto err;
3394
3395 prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
3396
3397 switch (prot_group_type) {
3398 case LPFC_PG_TYPE_NO_DIF:
3399 /* Here we need to add a DISEED to the count */
3400 if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt)
3401 goto err;
3402
3403 num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
3404 datasegcnt);
3405
3406 /* we should have 2 or more entries in buffer list */
3407 if (num_sge < 2)
3408 goto err;
3409 break;
3410
3411 case LPFC_PG_TYPE_DIF_BUF:
3412 /*
3413 * This type indicates that protection buffers are
3414 * passed to the driver, so that needs to be prepared
3415 * for DMA
3416 */
3417 protsegcnt = dma_map_sg(&phba->pcidev->dev,
3418 scsi_prot_sglist(scsi_cmnd),
3419 scsi_prot_sg_count(scsi_cmnd), datadir);
3420 if (unlikely(!protsegcnt)) {
3421 scsi_dma_unmap(scsi_cmnd);
3422 return 1;
3423 }
3424
3425 lpfc_cmd->prot_seg_cnt = protsegcnt;
3426 /*
3427 * There is a minimun of 3 SGEs used for every
3428 * protection data segment.
3429 */
3430 if ((lpfc_cmd->prot_seg_cnt * 3) >
3431 (phba->cfg_total_seg_cnt - 2))
3432 goto err;
3433
3434 num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
3435 datasegcnt, protsegcnt);
3436
3437 /* we should have 3 or more entries in buffer list */
3438 if ((num_sge < 3) ||
3439 (num_sge > phba->cfg_total_seg_cnt))
3440 goto err;
3441 break;
3442
3443 case LPFC_PG_TYPE_INVALID:
3444 default:
3445 scsi_dma_unmap(scsi_cmnd);
3446 lpfc_cmd->seg_cnt = 0;
3447
3448 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
3449 "9083 Unexpected protection group %i\n",
3450 prot_group_type);
3451 return 1;
3452 }
3453 }
3454
3455 switch (scsi_get_prot_op(scsi_cmnd)) {
3456 case SCSI_PROT_WRITE_STRIP:
3457 case SCSI_PROT_READ_STRIP:
3458 lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP;
3459 break;
3460 case SCSI_PROT_WRITE_INSERT:
3461 case SCSI_PROT_READ_INSERT:
3462 lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT;
3463 break;
3464 case SCSI_PROT_WRITE_PASS:
3465 case SCSI_PROT_READ_PASS:
3466 lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS;
3467 break;
3468 }
3469
3470 fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
3471 fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
3472
3473 /*
3474 * Due to difference in data length between DIF/non-DIF paths,
3475 * we need to set word 4 of IOCB here
3476 */
3477 iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
3478
3479 /*
3480 * If the OAS driver feature is enabled and the lun is enabled for
3481 * OAS, set the oas iocb related flags.
3482 */
3483 if ((phba->cfg_fof) && ((struct lpfc_device_data *)
3484 scsi_cmnd->device->hostdata)->oas_enabled)
3485 lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
3486
3487 return 0;
3488 err:
3489 if (lpfc_cmd->seg_cnt)
3490 scsi_dma_unmap(scsi_cmnd);
3491 if (lpfc_cmd->prot_seg_cnt)
3492 dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
3493 scsi_prot_sg_count(scsi_cmnd),
3494 scsi_cmnd->sc_data_direction);
3495
3496 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
3497 "9084 Cannot setup S/G List for HBA"
3498 "IO segs %d/%d SGL %d SCSI %d: %d %d\n",
3499 lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
3500 phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
3501 prot_group_type, num_sge);
3502
3503 lpfc_cmd->seg_cnt = 0;
3504 lpfc_cmd->prot_seg_cnt = 0;
3505 return 1;
3506 }
3507
3508 /**
3509 * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
3510 * @phba: The Hba for which this call is being executed.
3511 * @lpfc_cmd: The scsi buffer which is going to be mapped.
3512 *
3513 * This routine wraps the actual DMA mapping function pointer from the
3514 * lpfc_hba struct.
3515 *
3516 * Return codes:
3517 * 1 - Error
3518 * 0 - Success
3519 **/
3520 static inline int
3521 lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
3522 {
3523 return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
3524 }
3525
3526 /**
3527 * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
3528 * using BlockGuard.
3529 * @phba: The Hba for which this call is being executed.
3530 * @lpfc_cmd: The scsi buffer which is going to be mapped.
3531 *
3532 * This routine wraps the actual DMA mapping function pointer from the
3533 * lpfc_hba struct.
3534 *
3535 * Return codes:
3536 * 1 - Error
3537 * 0 - Success
3538 **/
3539 static inline int
3540 lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
3541 {
3542 return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
3543 }
3544
3545 /**
3546 * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
3547 * @phba: Pointer to hba context object.
3548 * @vport: Pointer to vport object.
3549 * @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
3550 * @rsp_iocb: Pointer to response iocb object which reported error.
3551 *
3552 * This function posts an event when there is a SCSI command reporting
3553 * error from the scsi device.
3554 **/
3555 static void
3556 lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
3557 struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) {
3558 struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
3559 struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
3560 uint32_t resp_info = fcprsp->rspStatus2;
3561 uint32_t scsi_status = fcprsp->rspStatus3;
3562 uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
3563 struct lpfc_fast_path_event *fast_path_evt = NULL;
3564 struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode;
3565 unsigned long flags;
3566
3567 if (!pnode || !NLP_CHK_NODE_ACT(pnode))
3568 return;
3569
3570 /* If there is queuefull or busy condition send a scsi event */
3571 if ((cmnd->result == SAM_STAT_TASK_SET_FULL) ||
3572 (cmnd->result == SAM_STAT_BUSY)) {
3573 fast_path_evt = lpfc_alloc_fast_evt(phba);
3574 if (!fast_path_evt)
3575 return;
3576 fast_path_evt->un.scsi_evt.event_type =
3577 FC_REG_SCSI_EVENT;
3578 fast_path_evt->un.scsi_evt.subcategory =
3579 (cmnd->result == SAM_STAT_TASK_SET_FULL) ?
3580 LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY;
3581 fast_path_evt->un.scsi_evt.lun = cmnd->device->lun;
3582 memcpy(&fast_path_evt->un.scsi_evt.wwpn,
3583 &pnode->nlp_portname, sizeof(struct lpfc_name));
3584 memcpy(&fast_path_evt->un.scsi_evt.wwnn,
3585 &pnode->nlp_nodename, sizeof(struct lpfc_name));
3586 } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen &&
3587 ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) {
3588 fast_path_evt = lpfc_alloc_fast_evt(phba);
3589 if (!fast_path_evt)
3590 return;
3591 fast_path_evt->un.check_cond_evt.scsi_event.event_type =
3592 FC_REG_SCSI_EVENT;
3593 fast_path_evt->un.check_cond_evt.scsi_event.subcategory =
3594 LPFC_EVENT_CHECK_COND;
3595 fast_path_evt->un.check_cond_evt.scsi_event.lun =
3596 cmnd->device->lun;
3597 memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn,
3598 &pnode->nlp_portname, sizeof(struct lpfc_name));
3599 memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn,
3600 &pnode->nlp_nodename, sizeof(struct lpfc_name));
3601 fast_path_evt->un.check_cond_evt.sense_key =
3602 cmnd->sense_buffer[2] & 0xf;
3603 fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12];
3604 fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13];
3605 } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
3606 fcpi_parm &&
3607 ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) ||
3608 ((scsi_status == SAM_STAT_GOOD) &&
3609 !(resp_info & (RESID_UNDER | RESID_OVER))))) {
3610 /*
3611 * If status is good or resid does not match with fcp_param and
3612 * there is valid fcpi_parm, then there is a read_check error
3613 */
3614 fast_path_evt = lpfc_alloc_fast_evt(phba);
3615 if (!fast_path_evt)
3616 return;
3617 fast_path_evt->un.read_check_error.header.event_type =
3618 FC_REG_FABRIC_EVENT;
3619 fast_path_evt->un.read_check_error.header.subcategory =
3620 LPFC_EVENT_FCPRDCHKERR;
3621 memcpy(&fast_path_evt->un.read_check_error.header.wwpn,
3622 &pnode->nlp_portname, sizeof(struct lpfc_name));
3623 memcpy(&fast_path_evt->un.read_check_error.header.wwnn,
3624 &pnode->nlp_nodename, sizeof(struct lpfc_name));
3625 fast_path_evt->un.read_check_error.lun = cmnd->device->lun;
3626 fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0];
3627 fast_path_evt->un.read_check_error.fcpiparam =
3628 fcpi_parm;
3629 } else
3630 return;
3631
3632 fast_path_evt->vport = vport;
3633 spin_lock_irqsave(&phba->hbalock, flags);
3634 list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
3635 spin_unlock_irqrestore(&phba->hbalock, flags);
3636 lpfc_worker_wake_up(phba);
3637 return;
3638 }
3639
3640 /**
3641 * lpfc_scsi_unprep_dma_buf - Un-map DMA mapping of SG-list for dev
3642 * @phba: The HBA for which this call is being executed.
3643 * @psb: The scsi buffer which is going to be un-mapped.
3644 *
3645 * This routine does DMA un-mapping of scatter gather list of scsi command
3646 * field of @lpfc_cmd for device with SLI-3 interface spec.
3647 **/
3648 static void
3649 lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
3650 {
3651 /*
3652 * There are only two special cases to consider. (1) the scsi command
3653 * requested scatter-gather usage or (2) the scsi command allocated
3654 * a request buffer, but did not request use_sg. There is a third
3655 * case, but it does not require resource deallocation.
3656 */
3657 if (psb->seg_cnt > 0)
3658 scsi_dma_unmap(psb->pCmd);
3659 if (psb->prot_seg_cnt > 0)
3660 dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd),
3661 scsi_prot_sg_count(psb->pCmd),
3662 psb->pCmd->sc_data_direction);
3663 }
3664
3665 /**
3666 * lpfc_handler_fcp_err - FCP response handler
3667 * @vport: The virtual port for which this call is being executed.
3668 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
3669 * @rsp_iocb: The response IOCB which contains FCP error.
3670 *
3671 * This routine is called to process response IOCB with status field
3672 * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command
3673 * based upon SCSI and FCP error.
3674 **/
3675 static void
3676 lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
3677 struct lpfc_iocbq *rsp_iocb)
3678 {
3679 struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
3680 struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
3681 struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
3682 uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
3683 uint32_t resp_info = fcprsp->rspStatus2;
3684 uint32_t scsi_status = fcprsp->rspStatus3;
3685 uint32_t *lp;
3686 uint32_t host_status = DID_OK;
3687 uint32_t rsplen = 0;
3688 uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
3689
3690
3691 /*
3692 * If this is a task management command, there is no
3693 * scsi packet associated with this lpfc_cmd. The driver
3694 * consumes it.
3695 */
3696 if (fcpcmd->fcpCntl2) {
3697 scsi_status = 0;
3698 goto out;
3699 }
3700
3701 if (resp_info & RSP_LEN_VALID) {
3702 rsplen = be32_to_cpu(fcprsp->rspRspLen);
3703 if (rsplen != 0 && rsplen != 4 && rsplen != 8) {
3704 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
3705 "2719 Invalid response length: "
3706 "tgt x%x lun x%llx cmnd x%x rsplen x%x\n",
3707 cmnd->device->id,
3708 cmnd->device->lun, cmnd->cmnd[0],
3709 rsplen);
3710 host_status = DID_ERROR;
3711 goto out;
3712 }
3713 if (fcprsp->rspInfo3 != RSP_NO_FAILURE) {
3714 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
3715 "2757 Protocol failure detected during "
3716 "processing of FCP I/O op: "
3717 "tgt x%x lun x%llx cmnd x%x rspInfo3 x%x\n",
3718 cmnd->device->id,
3719 cmnd->device->lun, cmnd->cmnd[0],
3720 fcprsp->rspInfo3);
3721 host_status = DID_ERROR;
3722 goto out;
3723 }
3724 }
3725
3726 if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
3727 uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
3728 if (snslen > SCSI_SENSE_BUFFERSIZE)
3729 snslen = SCSI_SENSE_BUFFERSIZE;
3730
3731 if (resp_info & RSP_LEN_VALID)
3732 rsplen = be32_to_cpu(fcprsp->rspRspLen);
3733 memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
3734 }
3735 lp = (uint32_t *)cmnd->sense_buffer;
3736
3737 /* special handling for under run conditions */
3738 if (!scsi_status && (resp_info & RESID_UNDER)) {
3739 /* don't log under runs if fcp set... */
3740 if (vport->cfg_log_verbose & LOG_FCP)
3741 logit = LOG_FCP_ERROR;
3742 /* unless operator says so */
3743 if (vport->cfg_log_verbose & LOG_FCP_UNDER)
3744 logit = LOG_FCP_UNDER;
3745 }
3746
3747 lpfc_printf_vlog(vport, KERN_WARNING, logit,
3748 "9024 FCP command x%x failed: x%x SNS x%x x%x "
3749 "Data: x%x x%x x%x x%x x%x\n",
3750 cmnd->cmnd[0], scsi_status,
3751 be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
3752 be32_to_cpu(fcprsp->rspResId),
3753 be32_to_cpu(fcprsp->rspSnsLen),
3754 be32_to_cpu(fcprsp->rspRspLen),
3755 fcprsp->rspInfo3);
3756
3757 scsi_set_resid(cmnd, 0);
3758 if (resp_info & RESID_UNDER) {
3759 scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
3760
3761 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
3762 "9025 FCP Read Underrun, expected %d, "
3763 "residual %d Data: x%x x%x x%x\n",
3764 be32_to_cpu(fcpcmd->fcpDl),
3765 scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
3766 cmnd->underflow);
3767
3768 /*
3769 * If there is an under run check if under run reported by
3770 * storage array is same as the under run reported by HBA.
3771 * If this is not same, there is a dropped frame.
3772 */
3773 if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
3774 fcpi_parm &&
3775 (scsi_get_resid(cmnd) != fcpi_parm)) {
3776 lpfc_printf_vlog(vport, KERN_WARNING,
3777 LOG_FCP | LOG_FCP_ERROR,
3778 "9026 FCP Read Check Error "
3779 "and Underrun Data: x%x x%x x%x x%x\n",
3780 be32_to_cpu(fcpcmd->fcpDl),
3781 scsi_get_resid(cmnd), fcpi_parm,
3782 cmnd->cmnd[0]);
3783 scsi_set_resid(cmnd, scsi_bufflen(cmnd));
3784 host_status = DID_ERROR;
3785 }
3786 /*
3787 * The cmnd->underflow is the minimum number of bytes that must
3788 * be transferred for this command. Provided a sense condition
3789 * is not present, make sure the actual amount transferred is at
3790 * least the underflow value or fail.
3791 */
3792 if (!(resp_info & SNS_LEN_VALID) &&
3793 (scsi_status == SAM_STAT_GOOD) &&
3794 (scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
3795 < cmnd->underflow)) {
3796 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
3797 "9027 FCP command x%x residual "
3798 "underrun converted to error "
3799 "Data: x%x x%x x%x\n",
3800 cmnd->cmnd[0], scsi_bufflen(cmnd),
3801 scsi_get_resid(cmnd), cmnd->underflow);
3802 host_status = DID_ERROR;
3803 }
3804 } else if (resp_info & RESID_OVER) {
3805 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
3806 "9028 FCP command x%x residual overrun error. "
3807 "Data: x%x x%x\n", cmnd->cmnd[0],
3808 scsi_bufflen(cmnd), scsi_get_resid(cmnd));
3809 host_status = DID_ERROR;
3810
3811 /*
3812 * Check SLI validation that all the transfer was actually done
3813 * (fcpi_parm should be zero). Apply check only to reads.
3814 */
3815 } else if (fcpi_parm && (cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
3816 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
3817 "9029 FCP Read Check Error Data: "
3818 "x%x x%x x%x x%x x%x\n",
3819 be32_to_cpu(fcpcmd->fcpDl),
3820 be32_to_cpu(fcprsp->rspResId),
3821 fcpi_parm, cmnd->cmnd[0], scsi_status);
3822 switch (scsi_status) {
3823 case SAM_STAT_GOOD:
3824 case SAM_STAT_CHECK_CONDITION:
3825 /* Fabric dropped a data frame. Fail any successful
3826 * command in which we detected dropped frames.
3827 * A status of good or some check conditions could
3828 * be considered a successful command.
3829 */
3830 host_status = DID_ERROR;
3831 break;
3832 }
3833 scsi_set_resid(cmnd, scsi_bufflen(cmnd));
3834 }
3835
3836 out:
3837 cmnd->result = ScsiResult(host_status, scsi_status);
3838 lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb);
3839 }
3840
3841 /**
3842 * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
3843 * @phba: Pointer to HBA context object.
3844 *
3845 * This routine performs a roundrobin SCSI command to SLI4 FCP WQ index
3846 * distribution. This is called by __lpfc_sli_issue_iocb_s4() with the hbalock
3847 * held.
3848 * If scsi-mq is enabled, get the default block layer mapping of software queues
3849 * to hardware queues. This information is saved in request tag.
3850 *
3851 * Return: index into SLI4 fast-path FCP queue index.
3852 **/
3853 int lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba,
3854 struct lpfc_scsi_buf *lpfc_cmd)
3855 {
3856 struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
3857 struct lpfc_vector_map_info *cpup;
3858 int chann, cpu;
3859 uint32_t tag;
3860 uint16_t hwq;
3861
3862 if (shost_use_blk_mq(cmnd->device->host)) {
3863 tag = blk_mq_unique_tag(cmnd->request);
3864 hwq = blk_mq_unique_tag_to_hwq(tag);
3865
3866 return hwq;
3867 }
3868
3869 if (phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_CPU
3870 && phba->cfg_fcp_io_channel > 1) {
3871 cpu = smp_processor_id();
3872 if (cpu < phba->sli4_hba.num_present_cpu) {
3873 cpup = phba->sli4_hba.cpu_map;
3874 cpup += cpu;
3875 return cpup->channel_id;
3876 }
3877 }
3878 chann = atomic_add_return(1, &phba->fcp_qidx);
3879 chann = (chann % phba->cfg_fcp_io_channel);
3880 return chann;
3881 }
3882
3883
3884 /**
3885 * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
3886 * @phba: The Hba for which this call is being executed.
3887 * @pIocbIn: The command IOCBQ for the scsi cmnd.
3888 * @pIocbOut: The response IOCBQ for the scsi cmnd.
3889 *
3890 * This routine assigns scsi command result by looking into response IOCB
3891 * status field appropriately. This routine handles QUEUE FULL condition as
3892 * well by ramping down device queue depth.
3893 **/
3894 static void
3895 lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
3896 struct lpfc_iocbq *pIocbOut)
3897 {
3898 struct lpfc_scsi_buf *lpfc_cmd =
3899 (struct lpfc_scsi_buf *) pIocbIn->context1;
3900 struct lpfc_vport *vport = pIocbIn->vport;
3901 struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
3902 struct lpfc_nodelist *pnode = rdata->pnode;
3903 struct scsi_cmnd *cmd;
3904 int depth;
3905 unsigned long flags;
3906 struct lpfc_fast_path_event *fast_path_evt;
3907 struct Scsi_Host *shost;
3908 uint32_t logit = LOG_FCP;
3909
3910 /* Sanity check on return of outstanding command */
3911 if (!(lpfc_cmd->pCmd))
3912 return;
3913 cmd = lpfc_cmd->pCmd;
3914 shost = cmd->device->host;
3915
3916 lpfc_cmd->result = (pIocbOut->iocb.un.ulpWord[4] & IOERR_PARAM_MASK);
3917 lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
3918 /* pick up SLI4 exhange busy status from HBA */
3919 lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;
3920
3921 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
3922 if (lpfc_cmd->prot_data_type) {
3923 struct scsi_dif_tuple *src = NULL;
3924
3925 src = (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment;
3926 /*
3927 * Used to restore any changes to protection
3928 * data for error injection.
3929 */
3930 switch (lpfc_cmd->prot_data_type) {
3931 case LPFC_INJERR_REFTAG:
3932 src->ref_tag =
3933 lpfc_cmd->prot_data;
3934 break;
3935 case LPFC_INJERR_APPTAG:
3936 src->app_tag =
3937 (uint16_t)lpfc_cmd->prot_data;
3938 break;
3939 case LPFC_INJERR_GUARD:
3940 src->guard_tag =
3941 (uint16_t)lpfc_cmd->prot_data;
3942 break;
3943 default:
3944 break;
3945 }
3946
3947 lpfc_cmd->prot_data = 0;
3948 lpfc_cmd->prot_data_type = 0;
3949 lpfc_cmd->prot_data_segment = NULL;
3950 }
3951 #endif
3952 if (pnode && NLP_CHK_NODE_ACT(pnode))
3953 atomic_dec(&pnode->cmd_pending);
3954
3955 if (lpfc_cmd->status) {
3956 if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
3957 (lpfc_cmd->result & IOERR_DRVR_MASK))
3958 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
3959 else if (lpfc_cmd->status >= IOSTAT_CNT)
3960 lpfc_cmd->status = IOSTAT_DEFAULT;
3961 if (lpfc_cmd->status == IOSTAT_FCP_RSP_ERROR &&
3962 !lpfc_cmd->fcp_rsp->rspStatus3 &&
3963 (lpfc_cmd->fcp_rsp->rspStatus2 & RESID_UNDER) &&
3964 !(vport->cfg_log_verbose & LOG_FCP_UNDER))
3965 logit = 0;
3966 else
3967 logit = LOG_FCP | LOG_FCP_UNDER;
3968 lpfc_printf_vlog(vport, KERN_WARNING, logit,
3969 "9030 FCP cmd x%x failed <%d/%lld> "
3970 "status: x%x result: x%x "
3971 "sid: x%x did: x%x oxid: x%x "
3972 "Data: x%x x%x\n",
3973 cmd->cmnd[0],
3974 cmd->device ? cmd->device->id : 0xffff,
3975 cmd->device ? cmd->device->lun : 0xffff,
3976 lpfc_cmd->status, lpfc_cmd->result,
3977 vport->fc_myDID,
3978 (pnode) ? pnode->nlp_DID : 0,
3979 phba->sli_rev == LPFC_SLI_REV4 ?
3980 lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff,
3981 pIocbOut->iocb.ulpContext,
3982 lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
3983
3984 switch (lpfc_cmd->status) {
3985 case IOSTAT_FCP_RSP_ERROR:
3986 /* Call FCP RSP handler to determine result */
3987 lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
3988 break;
3989 case IOSTAT_NPORT_BSY:
3990 case IOSTAT_FABRIC_BSY:
3991 cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
3992 fast_path_evt = lpfc_alloc_fast_evt(phba);
3993 if (!fast_path_evt)
3994 break;
3995 fast_path_evt->un.fabric_evt.event_type =
3996 FC_REG_FABRIC_EVENT;
3997 fast_path_evt->un.fabric_evt.subcategory =
3998 (lpfc_cmd->status == IOSTAT_NPORT_BSY) ?
3999 LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY;
4000 if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4001 memcpy(&fast_path_evt->un.fabric_evt.wwpn,
4002 &pnode->nlp_portname,
4003 sizeof(struct lpfc_name));
4004 memcpy(&fast_path_evt->un.fabric_evt.wwnn,
4005 &pnode->nlp_nodename,
4006 sizeof(struct lpfc_name));
4007 }
4008 fast_path_evt->vport = vport;
4009 fast_path_evt->work_evt.evt =
4010 LPFC_EVT_FASTPATH_MGMT_EVT;
4011 spin_lock_irqsave(&phba->hbalock, flags);
4012 list_add_tail(&fast_path_evt->work_evt.evt_listp,
4013 &phba->work_list);
4014 spin_unlock_irqrestore(&phba->hbalock, flags);
4015 lpfc_worker_wake_up(phba);
4016 break;
4017 case IOSTAT_LOCAL_REJECT:
4018 case IOSTAT_REMOTE_STOP:
4019 if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR ||
4020 lpfc_cmd->result ==
4021 IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR ||
4022 lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR ||
4023 lpfc_cmd->result ==
4024 IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) {
4025 cmd->result = ScsiResult(DID_NO_CONNECT, 0);
4026 break;
4027 }
4028 if (lpfc_cmd->result == IOERR_INVALID_RPI ||
4029 lpfc_cmd->result == IOERR_NO_RESOURCES ||
4030 lpfc_cmd->result == IOERR_ABORT_REQUESTED ||
4031 lpfc_cmd->result == IOERR_SLER_CMD_RCV_FAILURE) {
4032 cmd->result = ScsiResult(DID_REQUEUE, 0);
4033 break;
4034 }
4035 if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
4036 lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
4037 pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
4038 if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
4039 /*
4040 * This is a response for a BG enabled
4041 * cmd. Parse BG error
4042 */
4043 lpfc_parse_bg_err(phba, lpfc_cmd,
4044 pIocbOut);
4045 break;
4046 } else {
4047 lpfc_printf_vlog(vport, KERN_WARNING,
4048 LOG_BG,
4049 "9031 non-zero BGSTAT "
4050 "on unprotected cmd\n");
4051 }
4052 }
4053 if ((lpfc_cmd->status == IOSTAT_REMOTE_STOP)
4054 && (phba->sli_rev == LPFC_SLI_REV4)
4055 && (pnode && NLP_CHK_NODE_ACT(pnode))) {
4056 /* This IO was aborted by the target, we don't
4057 * know the rxid and because we did not send the
4058 * ABTS we cannot generate and RRQ.
4059 */
4060 lpfc_set_rrq_active(phba, pnode,
4061 lpfc_cmd->cur_iocbq.sli4_lxritag,
4062 0, 0);
4063 }
4064 /* else: fall through */
4065 default:
4066 cmd->result = ScsiResult(DID_ERROR, 0);
4067 break;
4068 }
4069
4070 if (!pnode || !NLP_CHK_NODE_ACT(pnode)
4071 || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
4072 cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
4073 SAM_STAT_BUSY);
4074 } else
4075 cmd->result = ScsiResult(DID_OK, 0);
4076
4077 if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
4078 uint32_t *lp = (uint32_t *)cmd->sense_buffer;
4079
4080 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4081 "0710 Iodone <%d/%llu> cmd %p, error "
4082 "x%x SNS x%x x%x Data: x%x x%x\n",
4083 cmd->device->id, cmd->device->lun, cmd,
4084 cmd->result, *lp, *(lp + 3), cmd->retries,
4085 scsi_get_resid(cmd));
4086 }
4087
4088 lpfc_update_stats(phba, lpfc_cmd);
4089 if (vport->cfg_max_scsicmpl_time &&
4090 time_after(jiffies, lpfc_cmd->start_time +
4091 msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
4092 spin_lock_irqsave(shost->host_lock, flags);
4093 if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4094 if (pnode->cmd_qdepth >
4095 atomic_read(&pnode->cmd_pending) &&
4096 (atomic_read(&pnode->cmd_pending) >
4097 LPFC_MIN_TGT_QDEPTH) &&
4098 ((cmd->cmnd[0] == READ_10) ||
4099 (cmd->cmnd[0] == WRITE_10)))
4100 pnode->cmd_qdepth =
4101 atomic_read(&pnode->cmd_pending);
4102
4103 pnode->last_change_time = jiffies;
4104 }
4105 spin_unlock_irqrestore(shost->host_lock, flags);
4106 } else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4107 if ((pnode->cmd_qdepth < vport->cfg_tgt_queue_depth) &&
4108 time_after(jiffies, pnode->last_change_time +
4109 msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
4110 spin_lock_irqsave(shost->host_lock, flags);
4111 depth = pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT
4112 / 100;
4113 depth = depth ? depth : 1;
4114 pnode->cmd_qdepth += depth;
4115 if (pnode->cmd_qdepth > vport->cfg_tgt_queue_depth)
4116 pnode->cmd_qdepth = vport->cfg_tgt_queue_depth;
4117 pnode->last_change_time = jiffies;
4118 spin_unlock_irqrestore(shost->host_lock, flags);
4119 }
4120 }
4121
4122 lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
4123
4124 /* The sdev is not guaranteed to be valid post scsi_done upcall. */
4125 cmd->scsi_done(cmd);
4126
4127 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4128 spin_lock_irqsave(&phba->hbalock, flags);
4129 lpfc_cmd->pCmd = NULL;
4130 spin_unlock_irqrestore(&phba->hbalock, flags);
4131
4132 /*
4133 * If there is a thread waiting for command completion
4134 * wake up the thread.
4135 */
4136 spin_lock_irqsave(shost->host_lock, flags);
4137 if (lpfc_cmd->waitq)
4138 wake_up(lpfc_cmd->waitq);
4139 spin_unlock_irqrestore(shost->host_lock, flags);
4140 lpfc_release_scsi_buf(phba, lpfc_cmd);
4141 return;
4142 }
4143
4144 spin_lock_irqsave(&phba->hbalock, flags);
4145 lpfc_cmd->pCmd = NULL;
4146 spin_unlock_irqrestore(&phba->hbalock, flags);
4147
4148 /*
4149 * If there is a thread waiting for command completion
4150 * wake up the thread.
4151 */
4152 spin_lock_irqsave(shost->host_lock, flags);
4153 if (lpfc_cmd->waitq)
4154 wake_up(lpfc_cmd->waitq);
4155 spin_unlock_irqrestore(shost->host_lock, flags);
4156
4157 lpfc_release_scsi_buf(phba, lpfc_cmd);
4158 }
4159
4160 /**
4161 * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
4162 * @data: A pointer to the immediate command data portion of the IOCB.
4163 * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
4164 *
4165 * The routine copies the entire FCP command from @fcp_cmnd to @data while
4166 * byte swapping the data to big endian format for transmission on the wire.
4167 **/
4168 static void
4169 lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
4170 {
4171 int i, j;
4172 for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
4173 i += sizeof(uint32_t), j++) {
4174 ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
4175 }
4176 }
4177
4178 /**
4179 * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
4180 * @vport: The virtual port for which this call is being executed.
4181 * @lpfc_cmd: The scsi command which needs to send.
4182 * @pnode: Pointer to lpfc_nodelist.
4183 *
4184 * This routine initializes fcp_cmnd and iocb data structure from scsi command
4185 * to transfer for device with SLI3 interface spec.
4186 **/
4187 static void
4188 lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
4189 struct lpfc_nodelist *pnode)
4190 {
4191 struct lpfc_hba *phba = vport->phba;
4192 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
4193 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
4194 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
4195 struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
4196 int datadir = scsi_cmnd->sc_data_direction;
4197 uint8_t *ptr;
4198 bool sli4;
4199 uint32_t fcpdl;
4200
4201 if (!pnode || !NLP_CHK_NODE_ACT(pnode))
4202 return;
4203
4204 lpfc_cmd->fcp_rsp->rspSnsLen = 0;
4205 /* clear task management bits */
4206 lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
4207
4208 int_to_scsilun(lpfc_cmd->pCmd->device->lun,
4209 &lpfc_cmd->fcp_cmnd->fcp_lun);
4210
4211 ptr = &fcp_cmnd->fcpCdb[0];
4212 memcpy(ptr, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
4213 if (scsi_cmnd->cmd_len < LPFC_FCP_CDB_LEN) {
4214 ptr += scsi_cmnd->cmd_len;
4215 memset(ptr, 0, (LPFC_FCP_CDB_LEN - scsi_cmnd->cmd_len));
4216 }
4217
4218 fcp_cmnd->fcpCntl1 = SIMPLE_Q;
4219
4220 sli4 = (phba->sli_rev == LPFC_SLI_REV4);
4221 piocbq->iocb.un.fcpi.fcpi_XRdy = 0;
4222
4223 /*
4224 * There are three possibilities here - use scatter-gather segment, use
4225 * the single mapping, or neither. Start the lpfc command prep by
4226 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
4227 * data bde entry.
4228 */
4229 if (scsi_sg_count(scsi_cmnd)) {
4230 if (datadir == DMA_TO_DEVICE) {
4231 iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
4232 iocb_cmd->ulpPU = PARM_READ_CHECK;
4233 if (vport->cfg_first_burst_size &&
4234 (pnode->nlp_flag & NLP_FIRSTBURST)) {
4235 fcpdl = scsi_bufflen(scsi_cmnd);
4236 if (fcpdl < vport->cfg_first_burst_size)
4237 piocbq->iocb.un.fcpi.fcpi_XRdy = fcpdl;
4238 else
4239 piocbq->iocb.un.fcpi.fcpi_XRdy =
4240 vport->cfg_first_burst_size;
4241 }
4242 fcp_cmnd->fcpCntl3 = WRITE_DATA;
4243 phba->fc4OutputRequests++;
4244 } else {
4245 iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
4246 iocb_cmd->ulpPU = PARM_READ_CHECK;
4247 fcp_cmnd->fcpCntl3 = READ_DATA;
4248 phba->fc4InputRequests++;
4249 }
4250 } else {
4251 iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
4252 iocb_cmd->un.fcpi.fcpi_parm = 0;
4253 iocb_cmd->ulpPU = 0;
4254 fcp_cmnd->fcpCntl3 = 0;
4255 phba->fc4ControlRequests++;
4256 }
4257 if (phba->sli_rev == 3 &&
4258 !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
4259 lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
4260 /*
4261 * Finish initializing those IOCB fields that are independent
4262 * of the scsi_cmnd request_buffer
4263 */
4264 piocbq->iocb.ulpContext = pnode->nlp_rpi;
4265 if (sli4)
4266 piocbq->iocb.ulpContext =
4267 phba->sli4_hba.rpi_ids[pnode->nlp_rpi];
4268 if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
4269 piocbq->iocb.ulpFCP2Rcvy = 1;
4270 else
4271 piocbq->iocb.ulpFCP2Rcvy = 0;
4272
4273 piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
4274 piocbq->context1 = lpfc_cmd;
4275 piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
4276 piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
4277 piocbq->vport = vport;
4278 }
4279
4280 /**
4281 * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit
4282 * @vport: The virtual port for which this call is being executed.
4283 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
4284 * @lun: Logical unit number.
4285 * @task_mgmt_cmd: SCSI task management command.
4286 *
4287 * This routine creates FCP information unit corresponding to @task_mgmt_cmd
4288 * for device with SLI-3 interface spec.
4289 *
4290 * Return codes:
4291 * 0 - Error
4292 * 1 - Success
4293 **/
4294 static int
4295 lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
4296 struct lpfc_scsi_buf *lpfc_cmd,
4297 uint64_t lun,
4298 uint8_t task_mgmt_cmd)
4299 {
4300 struct lpfc_iocbq *piocbq;
4301 IOCB_t *piocb;
4302 struct fcp_cmnd *fcp_cmnd;
4303 struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
4304 struct lpfc_nodelist *ndlp = rdata->pnode;
4305
4306 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) ||
4307 ndlp->nlp_state != NLP_STE_MAPPED_NODE)
4308 return 0;
4309
4310 piocbq = &(lpfc_cmd->cur_iocbq);
4311 piocbq->vport = vport;
4312
4313 piocb = &piocbq->iocb;
4314
4315 fcp_cmnd = lpfc_cmd->fcp_cmnd;
4316 /* Clear out any old data in the FCP command area */
4317 memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
4318 int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
4319 fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
4320 if (vport->phba->sli_rev == 3 &&
4321 !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
4322 lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
4323 piocb->ulpCommand = CMD_FCP_ICMND64_CR;
4324 piocb->ulpContext = ndlp->nlp_rpi;
4325 if (vport->phba->sli_rev == LPFC_SLI_REV4) {
4326 piocb->ulpContext =
4327 vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
4328 }
4329 piocb->ulpFCP2Rcvy = (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) ? 1 : 0;
4330 piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);
4331 piocb->ulpPU = 0;
4332 piocb->un.fcpi.fcpi_parm = 0;
4333
4334 /* ulpTimeout is only one byte */
4335 if (lpfc_cmd->timeout > 0xff) {
4336 /*
4337 * Do not timeout the command at the firmware level.
4338 * The driver will provide the timeout mechanism.
4339 */
4340 piocb->ulpTimeout = 0;
4341 } else
4342 piocb->ulpTimeout = lpfc_cmd->timeout;
4343
4344 if (vport->phba->sli_rev == LPFC_SLI_REV4)
4345 lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
4346
4347 return 1;
4348 }
4349
4350 /**
4351 * lpfc_scsi_api_table_setup - Set up scsi api function jump table
4352 * @phba: The hba struct for which this call is being executed.
4353 * @dev_grp: The HBA PCI-Device group number.
4354 *
4355 * This routine sets up the SCSI interface API function jump table in @phba
4356 * struct.
4357 * Returns: 0 - success, -ENODEV - failure.
4358 **/
4359 int
4360 lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
4361 {
4362
4363 phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
4364 phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;
4365
4366 switch (dev_grp) {
4367 case LPFC_PCI_DEV_LP:
4368 phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
4369 phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
4370 phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
4371 phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
4372 phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
4373 break;
4374 case LPFC_PCI_DEV_OC:
4375 phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
4376 phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
4377 phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
4378 phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
4379 phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
4380 break;
4381 default:
4382 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4383 "1418 Invalid HBA PCI-device group: 0x%x\n",
4384 dev_grp);
4385 return -ENODEV;
4386 break;
4387 }
4388 phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
4389 phba->lpfc_scsi_cmd_iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
4390 return 0;
4391 }
4392
4393 /**
4394 * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
4395 * @phba: The Hba for which this call is being executed.
4396 * @cmdiocbq: Pointer to lpfc_iocbq data structure.
4397 * @rspiocbq: Pointer to lpfc_iocbq data structure.
4398 *
4399 * This routine is IOCB completion routine for device reset and target reset
4400 * routine. This routine release scsi buffer associated with lpfc_cmd.
4401 **/
4402 static void
4403 lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
4404 struct lpfc_iocbq *cmdiocbq,
4405 struct lpfc_iocbq *rspiocbq)
4406 {
4407 struct lpfc_scsi_buf *lpfc_cmd =
4408 (struct lpfc_scsi_buf *) cmdiocbq->context1;
4409 if (lpfc_cmd)
4410 lpfc_release_scsi_buf(phba, lpfc_cmd);
4411 return;
4412 }
4413
4414 /**
4415 * lpfc_info - Info entry point of scsi_host_template data structure
4416 * @host: The scsi host for which this call is being executed.
4417 *
4418 * This routine provides module information about hba.
4419 *
4420 * Reutrn code:
4421 * Pointer to char - Success.
4422 **/
4423 const char *
4424 lpfc_info(struct Scsi_Host *host)
4425 {
4426 struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
4427 struct lpfc_hba *phba = vport->phba;
4428 int len, link_speed = 0;
4429 static char lpfcinfobuf[384];
4430
4431 memset(lpfcinfobuf,0,384);
4432 if (phba && phba->pcidev){
4433 strncpy(lpfcinfobuf, phba->ModelDesc, 256);
4434 len = strlen(lpfcinfobuf);
4435 snprintf(lpfcinfobuf + len,
4436 384-len,
4437 " on PCI bus %02x device %02x irq %d",
4438 phba->pcidev->bus->number,
4439 phba->pcidev->devfn,
4440 phba->pcidev->irq);
4441 len = strlen(lpfcinfobuf);
4442 if (phba->Port[0]) {
4443 snprintf(lpfcinfobuf + len,
4444 384-len,
4445 " port %s",
4446 phba->Port);
4447 }
4448 len = strlen(lpfcinfobuf);
4449 if (phba->sli_rev <= LPFC_SLI_REV3) {
4450 link_speed = lpfc_sli_port_speed_get(phba);
4451 } else {
4452 if (phba->sli4_hba.link_state.logical_speed)
4453 link_speed =
4454 phba->sli4_hba.link_state.logical_speed;
4455 else
4456 link_speed = phba->sli4_hba.link_state.speed;
4457 }
4458 if (link_speed != 0)
4459 snprintf(lpfcinfobuf + len, 384-len,
4460 " Logical Link Speed: %d Mbps", link_speed);
4461 }
4462 return lpfcinfobuf;
4463 }
4464
4465 /**
4466 * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
4467 * @phba: The Hba for which this call is being executed.
4468 *
4469 * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo.
4470 * The default value of cfg_poll_tmo is 10 milliseconds.
4471 **/
4472 static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
4473 {
4474 unsigned long poll_tmo_expires =
4475 (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));
4476
4477 if (!list_empty(&phba->sli.ring[LPFC_FCP_RING].txcmplq))
4478 mod_timer(&phba->fcp_poll_timer,
4479 poll_tmo_expires);
4480 }
4481
4482 /**
4483 * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
4484 * @phba: The Hba for which this call is being executed.
4485 *
4486 * This routine starts the fcp_poll_timer of @phba.
4487 **/
4488 void lpfc_poll_start_timer(struct lpfc_hba * phba)
4489 {
4490 lpfc_poll_rearm_timer(phba);
4491 }
4492
4493 /**
4494 * lpfc_poll_timeout - Restart polling timer
4495 * @ptr: Map to lpfc_hba data structure pointer.
4496 *
4497 * This routine restarts fcp_poll timer, when FCP ring polling is enable
4498 * and FCP Ring interrupt is disable.
4499 **/
4500
4501 void lpfc_poll_timeout(unsigned long ptr)
4502 {
4503 struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
4504
4505 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4506 lpfc_sli_handle_fast_ring_event(phba,
4507 &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
4508
4509 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4510 lpfc_poll_rearm_timer(phba);
4511 }
4512 }
4513
4514 /**
4515 * lpfc_queuecommand - scsi_host_template queuecommand entry point
4516 * @cmnd: Pointer to scsi_cmnd data structure.
4517 * @done: Pointer to done routine.
4518 *
4519 * Driver registers this routine to scsi midlayer to submit a @cmd to process.
4520 * This routine prepares an IOCB from scsi command and provides to firmware.
4521 * The @done callback is invoked after driver finished processing the command.
4522 *
4523 * Return value :
4524 * 0 - Success
4525 * SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
4526 **/
4527 static int
4528 lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
4529 {
4530 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4531 struct lpfc_hba *phba = vport->phba;
4532 struct lpfc_rport_data *rdata;
4533 struct lpfc_nodelist *ndlp;
4534 struct lpfc_scsi_buf *lpfc_cmd;
4535 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
4536 int err;
4537
4538 rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
4539 err = fc_remote_port_chkready(rport);
4540 if (err) {
4541 cmnd->result = err;
4542 goto out_fail_command;
4543 }
4544 ndlp = rdata->pnode;
4545
4546 if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
4547 (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) {
4548
4549 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
4550 "9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
4551 " op:%02x str=%s without registering for"
4552 " BlockGuard - Rejecting command\n",
4553 cmnd->cmnd[0], scsi_get_prot_op(cmnd),
4554 dif_op_str[scsi_get_prot_op(cmnd)]);
4555 goto out_fail_command;
4556 }
4557
4558 /*
4559 * Catch race where our node has transitioned, but the
4560 * transport is still transitioning.
4561 */
4562 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
4563 goto out_tgt_busy;
4564 if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
4565 goto out_tgt_busy;
4566
4567 lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp);
4568 if (lpfc_cmd == NULL) {
4569 lpfc_rampdown_queue_depth(phba);
4570
4571 lpfc_printf_vlog(vport, KERN_INFO, LOG_MISC,
4572 "0707 driver's buffer pool is empty, "
4573 "IO busied\n");
4574 goto out_host_busy;
4575 }
4576
4577 /*
4578 * Store the midlayer's command structure for the completion phase
4579 * and complete the command initialization.
4580 */
4581 lpfc_cmd->pCmd = cmnd;
4582 lpfc_cmd->rdata = rdata;
4583 lpfc_cmd->timeout = 0;
4584 lpfc_cmd->start_time = jiffies;
4585 cmnd->host_scribble = (unsigned char *)lpfc_cmd;
4586
4587 if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
4588 if (vport->phba->cfg_enable_bg) {
4589 lpfc_printf_vlog(vport,
4590 KERN_INFO, LOG_SCSI_CMD,
4591 "9033 BLKGRD: rcvd %s cmd:x%x "
4592 "sector x%llx cnt %u pt %x\n",
4593 dif_op_str[scsi_get_prot_op(cmnd)],
4594 cmnd->cmnd[0],
4595 (unsigned long long)scsi_get_lba(cmnd),
4596 blk_rq_sectors(cmnd->request),
4597 (cmnd->cmnd[1]>>5));
4598 }
4599 err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
4600 } else {
4601 if (vport->phba->cfg_enable_bg) {
4602 lpfc_printf_vlog(vport,
4603 KERN_INFO, LOG_SCSI_CMD,
4604 "9038 BLKGRD: rcvd PROT_NORMAL cmd: "
4605 "x%x sector x%llx cnt %u pt %x\n",
4606 cmnd->cmnd[0],
4607 (unsigned long long)scsi_get_lba(cmnd),
4608 blk_rq_sectors(cmnd->request),
4609 (cmnd->cmnd[1]>>5));
4610 }
4611 err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
4612 }
4613
4614 if (err)
4615 goto out_host_busy_free_buf;
4616
4617 lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
4618
4619 atomic_inc(&ndlp->cmd_pending);
4620 err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
4621 &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
4622 if (err) {
4623 atomic_dec(&ndlp->cmd_pending);
4624 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4625 "3376 FCP could not issue IOCB err %x"
4626 "FCP cmd x%x <%d/%llu> "
4627 "sid: x%x did: x%x oxid: x%x "
4628 "Data: x%x x%x x%x x%x\n",
4629 err, cmnd->cmnd[0],
4630 cmnd->device ? cmnd->device->id : 0xffff,
4631 cmnd->device ? cmnd->device->lun : (u64) -1,
4632 vport->fc_myDID, ndlp->nlp_DID,
4633 phba->sli_rev == LPFC_SLI_REV4 ?
4634 lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff,
4635 lpfc_cmd->cur_iocbq.iocb.ulpContext,
4636 lpfc_cmd->cur_iocbq.iocb.ulpIoTag,
4637 lpfc_cmd->cur_iocbq.iocb.ulpTimeout,
4638 (uint32_t)
4639 (cmnd->request->timeout / 1000));
4640
4641
4642 goto out_host_busy_free_buf;
4643 }
4644 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4645 lpfc_sli_handle_fast_ring_event(phba,
4646 &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
4647
4648 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4649 lpfc_poll_rearm_timer(phba);
4650 }
4651
4652 return 0;
4653
4654 out_host_busy_free_buf:
4655 lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
4656 lpfc_release_scsi_buf(phba, lpfc_cmd);
4657 out_host_busy:
4658 return SCSI_MLQUEUE_HOST_BUSY;
4659
4660 out_tgt_busy:
4661 return SCSI_MLQUEUE_TARGET_BUSY;
4662
4663 out_fail_command:
4664 cmnd->scsi_done(cmnd);
4665 return 0;
4666 }
4667
4668
4669 /**
4670 * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
4671 * @cmnd: Pointer to scsi_cmnd data structure.
4672 *
4673 * This routine aborts @cmnd pending in base driver.
4674 *
4675 * Return code :
4676 * 0x2003 - Error
4677 * 0x2002 - Success
4678 **/
4679 static int
4680 lpfc_abort_handler(struct scsi_cmnd *cmnd)
4681 {
4682 struct Scsi_Host *shost = cmnd->device->host;
4683 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4684 struct lpfc_hba *phba = vport->phba;
4685 struct lpfc_iocbq *iocb;
4686 struct lpfc_iocbq *abtsiocb;
4687 struct lpfc_scsi_buf *lpfc_cmd;
4688 IOCB_t *cmd, *icmd;
4689 int ret = SUCCESS, status = 0;
4690 struct lpfc_sli_ring *pring_s4;
4691 int ring_number, ret_val;
4692 unsigned long flags, iflags;
4693 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
4694
4695 status = fc_block_scsi_eh(cmnd);
4696 if (status != 0 && status != SUCCESS)
4697 return status;
4698
4699 spin_lock_irqsave(&phba->hbalock, flags);
4700 /* driver queued commands are in process of being flushed */
4701 if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) {
4702 spin_unlock_irqrestore(&phba->hbalock, flags);
4703 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4704 "3168 SCSI Layer abort requested I/O has been "
4705 "flushed by LLD.\n");
4706 return FAILED;
4707 }
4708
4709 lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
4710 if (!lpfc_cmd || !lpfc_cmd->pCmd) {
4711 spin_unlock_irqrestore(&phba->hbalock, flags);
4712 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4713 "2873 SCSI Layer I/O Abort Request IO CMPL Status "
4714 "x%x ID %d LUN %llu\n",
4715 SUCCESS, cmnd->device->id, cmnd->device->lun);
4716 return SUCCESS;
4717 }
4718
4719 iocb = &lpfc_cmd->cur_iocbq;
4720 /* the command is in process of being cancelled */
4721 if (!(iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
4722 spin_unlock_irqrestore(&phba->hbalock, flags);
4723 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4724 "3169 SCSI Layer abort requested I/O has been "
4725 "cancelled by LLD.\n");
4726 return FAILED;
4727 }
4728 /*
4729 * If pCmd field of the corresponding lpfc_scsi_buf structure
4730 * points to a different SCSI command, then the driver has
4731 * already completed this command, but the midlayer did not
4732 * see the completion before the eh fired. Just return SUCCESS.
4733 */
4734 if (lpfc_cmd->pCmd != cmnd) {
4735 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4736 "3170 SCSI Layer abort requested I/O has been "
4737 "completed by LLD.\n");
4738 goto out_unlock;
4739 }
4740
4741 BUG_ON(iocb->context1 != lpfc_cmd);
4742
4743 /* abort issued in recovery is still in progress */
4744 if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) {
4745 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4746 "3389 SCSI Layer I/O Abort Request is pending\n");
4747 spin_unlock_irqrestore(&phba->hbalock, flags);
4748 goto wait_for_cmpl;
4749 }
4750
4751 abtsiocb = __lpfc_sli_get_iocbq(phba);
4752 if (abtsiocb == NULL) {
4753 ret = FAILED;
4754 goto out_unlock;
4755 }
4756
4757 /* Indicate the IO is being aborted by the driver. */
4758 iocb->iocb_flag |= LPFC_DRIVER_ABORTED;
4759
4760 /*
4761 * The scsi command can not be in txq and it is in flight because the
4762 * pCmd is still pointig at the SCSI command we have to abort. There
4763 * is no need to search the txcmplq. Just send an abort to the FW.
4764 */
4765
4766 cmd = &iocb->iocb;
4767 icmd = &abtsiocb->iocb;
4768 icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
4769 icmd->un.acxri.abortContextTag = cmd->ulpContext;
4770 if (phba->sli_rev == LPFC_SLI_REV4)
4771 icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
4772 else
4773 icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
4774
4775 icmd->ulpLe = 1;
4776 icmd->ulpClass = cmd->ulpClass;
4777
4778 /* ABTS WQE must go to the same WQ as the WQE to be aborted */
4779 abtsiocb->fcp_wqidx = iocb->fcp_wqidx;
4780 abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
4781 if (iocb->iocb_flag & LPFC_IO_FOF)
4782 abtsiocb->iocb_flag |= LPFC_IO_FOF;
4783
4784 if (lpfc_is_link_up(phba))
4785 icmd->ulpCommand = CMD_ABORT_XRI_CN;
4786 else
4787 icmd->ulpCommand = CMD_CLOSE_XRI_CN;
4788
4789 abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
4790 abtsiocb->vport = vport;
4791 if (phba->sli_rev == LPFC_SLI_REV4) {
4792 ring_number = MAX_SLI3_CONFIGURED_RINGS + iocb->fcp_wqidx;
4793 pring_s4 = &phba->sli.ring[ring_number];
4794 /* Note: both hbalock and ring_lock must be set here */
4795 spin_lock_irqsave(&pring_s4->ring_lock, iflags);
4796 ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
4797 abtsiocb, 0);
4798 spin_unlock_irqrestore(&pring_s4->ring_lock, iflags);
4799 } else {
4800 ret_val = __lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
4801 abtsiocb, 0);
4802 }
4803 /* no longer need the lock after this point */
4804 spin_unlock_irqrestore(&phba->hbalock, flags);
4805
4806
4807 if (ret_val == IOCB_ERROR) {
4808 lpfc_sli_release_iocbq(phba, abtsiocb);
4809 ret = FAILED;
4810 goto out;
4811 }
4812
4813 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4814 lpfc_sli_handle_fast_ring_event(phba,
4815 &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
4816
4817 wait_for_cmpl:
4818 lpfc_cmd->waitq = &waitq;
4819 /* Wait for abort to complete */
4820 wait_event_timeout(waitq,
4821 (lpfc_cmd->pCmd != cmnd),
4822 msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
4823
4824 spin_lock_irqsave(shost->host_lock, flags);
4825 lpfc_cmd->waitq = NULL;
4826 spin_unlock_irqrestore(shost->host_lock, flags);
4827
4828 if (lpfc_cmd->pCmd == cmnd) {
4829 ret = FAILED;
4830 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
4831 "0748 abort handler timed out waiting "
4832 "for abortng I/O (xri:x%x) to complete: "
4833 "ret %#x, ID %d, LUN %llu\n",
4834 iocb->sli4_xritag, ret,
4835 cmnd->device->id, cmnd->device->lun);
4836 }
4837 goto out;
4838
4839 out_unlock:
4840 spin_unlock_irqrestore(&phba->hbalock, flags);
4841 out:
4842 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4843 "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
4844 "LUN %llu\n", ret, cmnd->device->id,
4845 cmnd->device->lun);
4846 return ret;
4847 }
4848
4849 static char *
4850 lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
4851 {
4852 switch (task_mgmt_cmd) {
4853 case FCP_ABORT_TASK_SET:
4854 return "ABORT_TASK_SET";
4855 case FCP_CLEAR_TASK_SET:
4856 return "FCP_CLEAR_TASK_SET";
4857 case FCP_BUS_RESET:
4858 return "FCP_BUS_RESET";
4859 case FCP_LUN_RESET:
4860 return "FCP_LUN_RESET";
4861 case FCP_TARGET_RESET:
4862 return "FCP_TARGET_RESET";
4863 case FCP_CLEAR_ACA:
4864 return "FCP_CLEAR_ACA";
4865 case FCP_TERMINATE_TASK:
4866 return "FCP_TERMINATE_TASK";
4867 default:
4868 return "unknown";
4869 }
4870 }
4871
4872
4873 /**
4874 * lpfc_check_fcp_rsp - check the returned fcp_rsp to see if task failed
4875 * @vport: The virtual port for which this call is being executed.
4876 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
4877 *
4878 * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeded
4879 *
4880 * Return code :
4881 * 0x2003 - Error
4882 * 0x2002 - Success
4883 **/
4884 static int
4885 lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd)
4886 {
4887 struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
4888 uint32_t rsp_info;
4889 uint32_t rsp_len;
4890 uint8_t rsp_info_code;
4891 int ret = FAILED;
4892
4893
4894 if (fcprsp == NULL)
4895 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4896 "0703 fcp_rsp is missing\n");
4897 else {
4898 rsp_info = fcprsp->rspStatus2;
4899 rsp_len = be32_to_cpu(fcprsp->rspRspLen);
4900 rsp_info_code = fcprsp->rspInfo3;
4901
4902
4903 lpfc_printf_vlog(vport, KERN_INFO,
4904 LOG_FCP,
4905 "0706 fcp_rsp valid 0x%x,"
4906 " rsp len=%d code 0x%x\n",
4907 rsp_info,
4908 rsp_len, rsp_info_code);
4909
4910 if ((fcprsp->rspStatus2&RSP_LEN_VALID) && (rsp_len == 8)) {
4911 switch (rsp_info_code) {
4912 case RSP_NO_FAILURE:
4913 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4914 "0715 Task Mgmt No Failure\n");
4915 ret = SUCCESS;
4916 break;
4917 case RSP_TM_NOT_SUPPORTED: /* TM rejected */
4918 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4919 "0716 Task Mgmt Target "
4920 "reject\n");
4921 break;
4922 case RSP_TM_NOT_COMPLETED: /* TM failed */
4923 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4924 "0717 Task Mgmt Target "
4925 "failed TM\n");
4926 break;
4927 case RSP_TM_INVALID_LU: /* TM to invalid LU! */
4928 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4929 "0718 Task Mgmt to invalid "
4930 "LUN\n");
4931 break;
4932 }
4933 }
4934 }
4935 return ret;
4936 }
4937
4938
4939 /**
4940 * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
4941 * @vport: The virtual port for which this call is being executed.
4942 * @rdata: Pointer to remote port local data
4943 * @tgt_id: Target ID of remote device.
4944 * @lun_id: Lun number for the TMF
4945 * @task_mgmt_cmd: type of TMF to send
4946 *
4947 * This routine builds and sends a TMF (SCSI Task Mgmt Function) to
4948 * a remote port.
4949 *
4950 * Return Code:
4951 * 0x2003 - Error
4952 * 0x2002 - Success.
4953 **/
4954 static int
4955 lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata,
4956 unsigned tgt_id, uint64_t lun_id,
4957 uint8_t task_mgmt_cmd)
4958 {
4959 struct lpfc_hba *phba = vport->phba;
4960 struct lpfc_scsi_buf *lpfc_cmd;
4961 struct lpfc_iocbq *iocbq;
4962 struct lpfc_iocbq *iocbqrsp;
4963 struct lpfc_nodelist *pnode = rdata->pnode;
4964 int ret;
4965 int status;
4966
4967 if (!pnode || !NLP_CHK_NODE_ACT(pnode))
4968 return FAILED;
4969
4970 lpfc_cmd = lpfc_get_scsi_buf(phba, rdata->pnode);
4971 if (lpfc_cmd == NULL)
4972 return FAILED;
4973 lpfc_cmd->timeout = phba->cfg_task_mgmt_tmo;
4974 lpfc_cmd->rdata = rdata;
4975
4976 status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
4977 task_mgmt_cmd);
4978 if (!status) {
4979 lpfc_release_scsi_buf(phba, lpfc_cmd);
4980 return FAILED;
4981 }
4982
4983 iocbq = &lpfc_cmd->cur_iocbq;
4984 iocbqrsp = lpfc_sli_get_iocbq(phba);
4985 if (iocbqrsp == NULL) {
4986 lpfc_release_scsi_buf(phba, lpfc_cmd);
4987 return FAILED;
4988 }
4989 iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
4990
4991 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4992 "0702 Issue %s to TGT %d LUN %llu "
4993 "rpi x%x nlp_flag x%x Data: x%x x%x\n",
4994 lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
4995 pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag,
4996 iocbq->iocb_flag);
4997
4998 status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
4999 iocbq, iocbqrsp, lpfc_cmd->timeout);
5000 if ((status != IOCB_SUCCESS) ||
5001 (iocbqrsp->iocb.ulpStatus != IOSTAT_SUCCESS)) {
5002 if (status != IOCB_SUCCESS ||
5003 iocbqrsp->iocb.ulpStatus != IOSTAT_FCP_RSP_ERROR)
5004 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5005 "0727 TMF %s to TGT %d LUN %llu "
5006 "failed (%d, %d) iocb_flag x%x\n",
5007 lpfc_taskmgmt_name(task_mgmt_cmd),
5008 tgt_id, lun_id,
5009 iocbqrsp->iocb.ulpStatus,
5010 iocbqrsp->iocb.un.ulpWord[4],
5011 iocbq->iocb_flag);
5012 /* if ulpStatus != IOCB_SUCCESS, then status == IOCB_SUCCESS */
5013 if (status == IOCB_SUCCESS) {
5014 if (iocbqrsp->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
5015 /* Something in the FCP_RSP was invalid.
5016 * Check conditions */
5017 ret = lpfc_check_fcp_rsp(vport, lpfc_cmd);
5018 else
5019 ret = FAILED;
5020 } else if (status == IOCB_TIMEDOUT) {
5021 ret = TIMEOUT_ERROR;
5022 } else {
5023 ret = FAILED;
5024 }
5025 } else
5026 ret = SUCCESS;
5027
5028 lpfc_sli_release_iocbq(phba, iocbqrsp);
5029
5030 if (ret != TIMEOUT_ERROR)
5031 lpfc_release_scsi_buf(phba, lpfc_cmd);
5032
5033 return ret;
5034 }
5035
5036 /**
5037 * lpfc_chk_tgt_mapped -
5038 * @vport: The virtual port to check on
5039 * @cmnd: Pointer to scsi_cmnd data structure.
5040 *
5041 * This routine delays until the scsi target (aka rport) for the
5042 * command exists (is present and logged in) or we declare it non-existent.
5043 *
5044 * Return code :
5045 * 0x2003 - Error
5046 * 0x2002 - Success
5047 **/
5048 static int
5049 lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
5050 {
5051 struct lpfc_rport_data *rdata;
5052 struct lpfc_nodelist *pnode;
5053 unsigned long later;
5054
5055 rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5056 if (!rdata) {
5057 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
5058 "0797 Tgt Map rport failure: rdata x%p\n", rdata);
5059 return FAILED;
5060 }
5061 pnode = rdata->pnode;
5062 /*
5063 * If target is not in a MAPPED state, delay until
5064 * target is rediscovered or devloss timeout expires.
5065 */
5066 later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
5067 while (time_after(later, jiffies)) {
5068 if (!pnode || !NLP_CHK_NODE_ACT(pnode))
5069 return FAILED;
5070 if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
5071 return SUCCESS;
5072 schedule_timeout_uninterruptible(msecs_to_jiffies(500));
5073 rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5074 if (!rdata)
5075 return FAILED;
5076 pnode = rdata->pnode;
5077 }
5078 if (!pnode || !NLP_CHK_NODE_ACT(pnode) ||
5079 (pnode->nlp_state != NLP_STE_MAPPED_NODE))
5080 return FAILED;
5081 return SUCCESS;
5082 }
5083
5084 /**
5085 * lpfc_reset_flush_io_context -
5086 * @vport: The virtual port (scsi_host) for the flush context
5087 * @tgt_id: If aborting by Target contect - specifies the target id
5088 * @lun_id: If aborting by Lun context - specifies the lun id
5089 * @context: specifies the context level to flush at.
5090 *
5091 * After a reset condition via TMF, we need to flush orphaned i/o
5092 * contexts from the adapter. This routine aborts any contexts
5093 * outstanding, then waits for their completions. The wait is
5094 * bounded by devloss_tmo though.
5095 *
5096 * Return code :
5097 * 0x2003 - Error
5098 * 0x2002 - Success
5099 **/
5100 static int
5101 lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
5102 uint64_t lun_id, lpfc_ctx_cmd context)
5103 {
5104 struct lpfc_hba *phba = vport->phba;
5105 unsigned long later;
5106 int cnt;
5107
5108 cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
5109 if (cnt)
5110 lpfc_sli_abort_taskmgmt(vport,
5111 &phba->sli.ring[phba->sli.fcp_ring],
5112 tgt_id, lun_id, context);
5113 later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
5114 while (time_after(later, jiffies) && cnt) {
5115 schedule_timeout_uninterruptible(msecs_to_jiffies(20));
5116 cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
5117 }
5118 if (cnt) {
5119 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5120 "0724 I/O flush failure for context %s : cnt x%x\n",
5121 ((context == LPFC_CTX_LUN) ? "LUN" :
5122 ((context == LPFC_CTX_TGT) ? "TGT" :
5123 ((context == LPFC_CTX_HOST) ? "HOST" : "Unknown"))),
5124 cnt);
5125 return FAILED;
5126 }
5127 return SUCCESS;
5128 }
5129
5130 /**
5131 * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
5132 * @cmnd: Pointer to scsi_cmnd data structure.
5133 *
5134 * This routine does a device reset by sending a LUN_RESET task management
5135 * command.
5136 *
5137 * Return code :
5138 * 0x2003 - Error
5139 * 0x2002 - Success
5140 **/
5141 static int
5142 lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
5143 {
5144 struct Scsi_Host *shost = cmnd->device->host;
5145 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5146 struct lpfc_rport_data *rdata;
5147 struct lpfc_nodelist *pnode;
5148 unsigned tgt_id = cmnd->device->id;
5149 uint64_t lun_id = cmnd->device->lun;
5150 struct lpfc_scsi_event_header scsi_event;
5151 int status;
5152
5153 rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5154 if (!rdata || !rdata->pnode) {
5155 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5156 "0798 Device Reset rport failure: rdata x%p\n",
5157 rdata);
5158 return FAILED;
5159 }
5160 pnode = rdata->pnode;
5161 status = fc_block_scsi_eh(cmnd);
5162 if (status != 0 && status != SUCCESS)
5163 return status;
5164
5165 status = lpfc_chk_tgt_mapped(vport, cmnd);
5166 if (status == FAILED) {
5167 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5168 "0721 Device Reset rport failure: rdata x%p\n", rdata);
5169 return FAILED;
5170 }
5171
5172 scsi_event.event_type = FC_REG_SCSI_EVENT;
5173 scsi_event.subcategory = LPFC_EVENT_LUNRESET;
5174 scsi_event.lun = lun_id;
5175 memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
5176 memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
5177
5178 fc_host_post_vendor_event(shost, fc_get_event_number(),
5179 sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
5180
5181 status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
5182 FCP_LUN_RESET);
5183
5184 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5185 "0713 SCSI layer issued Device Reset (%d, %llu) "
5186 "return x%x\n", tgt_id, lun_id, status);
5187
5188 /*
5189 * We have to clean up i/o as : they may be orphaned by the TMF;
5190 * or if the TMF failed, they may be in an indeterminate state.
5191 * So, continue on.
5192 * We will report success if all the i/o aborts successfully.
5193 */
5194 if (status == SUCCESS)
5195 status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5196 LPFC_CTX_LUN);
5197
5198 return status;
5199 }
5200
5201 /**
5202 * lpfc_target_reset_handler - scsi_host_template eh_target_reset entry point
5203 * @cmnd: Pointer to scsi_cmnd data structure.
5204 *
5205 * This routine does a target reset by sending a TARGET_RESET task management
5206 * command.
5207 *
5208 * Return code :
5209 * 0x2003 - Error
5210 * 0x2002 - Success
5211 **/
5212 static int
5213 lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
5214 {
5215 struct Scsi_Host *shost = cmnd->device->host;
5216 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5217 struct lpfc_rport_data *rdata;
5218 struct lpfc_nodelist *pnode;
5219 unsigned tgt_id = cmnd->device->id;
5220 uint64_t lun_id = cmnd->device->lun;
5221 struct lpfc_scsi_event_header scsi_event;
5222 int status;
5223
5224 rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5225 if (!rdata) {
5226 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5227 "0799 Target Reset rport failure: rdata x%p\n", rdata);
5228 return FAILED;
5229 }
5230 pnode = rdata->pnode;
5231 status = fc_block_scsi_eh(cmnd);
5232 if (status != 0 && status != SUCCESS)
5233 return status;
5234
5235 status = lpfc_chk_tgt_mapped(vport, cmnd);
5236 if (status == FAILED) {
5237 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5238 "0722 Target Reset rport failure: rdata x%p\n", rdata);
5239 if (pnode) {
5240 spin_lock_irq(shost->host_lock);
5241 pnode->nlp_flag &= ~NLP_NPR_ADISC;
5242 pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
5243 spin_unlock_irq(shost->host_lock);
5244 }
5245 lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5246 LPFC_CTX_TGT);
5247 return FAST_IO_FAIL;
5248 }
5249
5250 scsi_event.event_type = FC_REG_SCSI_EVENT;
5251 scsi_event.subcategory = LPFC_EVENT_TGTRESET;
5252 scsi_event.lun = 0;
5253 memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
5254 memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
5255
5256 fc_host_post_vendor_event(shost, fc_get_event_number(),
5257 sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
5258
5259 status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
5260 FCP_TARGET_RESET);
5261
5262 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5263 "0723 SCSI layer issued Target Reset (%d, %llu) "
5264 "return x%x\n", tgt_id, lun_id, status);
5265
5266 /*
5267 * We have to clean up i/o as : they may be orphaned by the TMF;
5268 * or if the TMF failed, they may be in an indeterminate state.
5269 * So, continue on.
5270 * We will report success if all the i/o aborts successfully.
5271 */
5272 if (status == SUCCESS)
5273 status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5274 LPFC_CTX_TGT);
5275 return status;
5276 }
5277
5278 /**
5279 * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
5280 * @cmnd: Pointer to scsi_cmnd data structure.
5281 *
5282 * This routine does target reset to all targets on @cmnd->device->host.
5283 * This emulates Parallel SCSI Bus Reset Semantics.
5284 *
5285 * Return code :
5286 * 0x2003 - Error
5287 * 0x2002 - Success
5288 **/
5289 static int
5290 lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
5291 {
5292 struct Scsi_Host *shost = cmnd->device->host;
5293 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5294 struct lpfc_nodelist *ndlp = NULL;
5295 struct lpfc_scsi_event_header scsi_event;
5296 int match;
5297 int ret = SUCCESS, status, i;
5298
5299 scsi_event.event_type = FC_REG_SCSI_EVENT;
5300 scsi_event.subcategory = LPFC_EVENT_BUSRESET;
5301 scsi_event.lun = 0;
5302 memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
5303 memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
5304
5305 fc_host_post_vendor_event(shost, fc_get_event_number(),
5306 sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
5307
5308 status = fc_block_scsi_eh(cmnd);
5309 if (status != 0 && status != SUCCESS)
5310 return status;
5311
5312 /*
5313 * Since the driver manages a single bus device, reset all
5314 * targets known to the driver. Should any target reset
5315 * fail, this routine returns failure to the midlayer.
5316 */
5317 for (i = 0; i < LPFC_MAX_TARGET; i++) {
5318 /* Search for mapped node by target ID */
5319 match = 0;
5320 spin_lock_irq(shost->host_lock);
5321 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
5322 if (!NLP_CHK_NODE_ACT(ndlp))
5323 continue;
5324 if (vport->phba->cfg_fcp2_no_tgt_reset &&
5325 (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
5326 continue;
5327 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
5328 ndlp->nlp_sid == i &&
5329 ndlp->rport) {
5330 match = 1;
5331 break;
5332 }
5333 }
5334 spin_unlock_irq(shost->host_lock);
5335 if (!match)
5336 continue;
5337
5338 status = lpfc_send_taskmgmt(vport, ndlp->rport->dd_data,
5339 i, 0, FCP_TARGET_RESET);
5340
5341 if (status != SUCCESS) {
5342 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5343 "0700 Bus Reset on target %d failed\n",
5344 i);
5345 ret = FAILED;
5346 }
5347 }
5348 /*
5349 * We have to clean up i/o as : they may be orphaned by the TMFs
5350 * above; or if any of the TMFs failed, they may be in an
5351 * indeterminate state.
5352 * We will report success if all the i/o aborts successfully.
5353 */
5354
5355 status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
5356 if (status != SUCCESS)
5357 ret = FAILED;
5358
5359 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5360 "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
5361 return ret;
5362 }
5363
5364 /**
5365 * lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
5366 * @cmnd: Pointer to scsi_cmnd data structure.
5367 *
5368 * This routine does host reset to the adaptor port. It brings the HBA
5369 * offline, performs a board restart, and then brings the board back online.
5370 * The lpfc_offline calls lpfc_sli_hba_down which will abort and local
5371 * reject all outstanding SCSI commands to the host and error returned
5372 * back to SCSI mid-level. As this will be SCSI mid-level's last resort
5373 * of error handling, it will only return error if resetting of the adapter
5374 * is not successful; in all other cases, will return success.
5375 *
5376 * Return code :
5377 * 0x2003 - Error
5378 * 0x2002 - Success
5379 **/
5380 static int
5381 lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
5382 {
5383 struct Scsi_Host *shost = cmnd->device->host;
5384 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5385 struct lpfc_hba *phba = vport->phba;
5386 int rc, ret = SUCCESS;
5387
5388 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5389 "3172 SCSI layer issued Host Reset Data:\n");
5390
5391 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
5392 lpfc_offline(phba);
5393 rc = lpfc_sli_brdrestart(phba);
5394 if (rc)
5395 ret = FAILED;
5396 rc = lpfc_online(phba);
5397 if (rc)
5398 ret = FAILED;
5399 lpfc_unblock_mgmt_io(phba);
5400
5401 if (ret == FAILED) {
5402 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5403 "3323 Failed host reset, bring it offline\n");
5404 lpfc_sli4_offline_eratt(phba);
5405 }
5406 return ret;
5407 }
5408
5409 /**
5410 * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
5411 * @sdev: Pointer to scsi_device.
5412 *
5413 * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
5414 * globally available list of scsi buffers. This routine also makes sure scsi
5415 * buffer is not allocated more than HBA limit conveyed to midlayer. This list
5416 * of scsi buffer exists for the lifetime of the driver.
5417 *
5418 * Return codes:
5419 * non-0 - Error
5420 * 0 - Success
5421 **/
5422 static int
5423 lpfc_slave_alloc(struct scsi_device *sdev)
5424 {
5425 struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
5426 struct lpfc_hba *phba = vport->phba;
5427 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
5428 uint32_t total = 0;
5429 uint32_t num_to_alloc = 0;
5430 int num_allocated = 0;
5431 uint32_t sdev_cnt;
5432 struct lpfc_device_data *device_data;
5433 unsigned long flags;
5434 struct lpfc_name target_wwpn;
5435
5436 if (!rport || fc_remote_port_chkready(rport))
5437 return -ENXIO;
5438
5439 if (phba->cfg_fof) {
5440
5441 /*
5442 * Check to see if the device data structure for the lun
5443 * exists. If not, create one.
5444 */
5445
5446 u64_to_wwn(rport->port_name, target_wwpn.u.wwn);
5447 spin_lock_irqsave(&phba->devicelock, flags);
5448 device_data = __lpfc_get_device_data(phba,
5449 &phba->luns,
5450 &vport->fc_portname,
5451 &target_wwpn,
5452 sdev->lun);
5453 if (!device_data) {
5454 spin_unlock_irqrestore(&phba->devicelock, flags);
5455 device_data = lpfc_create_device_data(phba,
5456 &vport->fc_portname,
5457 &target_wwpn,
5458 sdev->lun, true);
5459 if (!device_data)
5460 return -ENOMEM;
5461 spin_lock_irqsave(&phba->devicelock, flags);
5462 list_add_tail(&device_data->listentry, &phba->luns);
5463 }
5464 device_data->rport_data = rport->dd_data;
5465 device_data->available = true;
5466 spin_unlock_irqrestore(&phba->devicelock, flags);
5467 sdev->hostdata = device_data;
5468 } else {
5469 sdev->hostdata = rport->dd_data;
5470 }
5471 sdev_cnt = atomic_inc_return(&phba->sdev_cnt);
5472
5473 /*
5474 * Populate the cmds_per_lun count scsi_bufs into this host's globally
5475 * available list of scsi buffers. Don't allocate more than the
5476 * HBA limit conveyed to the midlayer via the host structure. The
5477 * formula accounts for the lun_queue_depth + error handlers + 1
5478 * extra. This list of scsi bufs exists for the lifetime of the driver.
5479 */
5480 total = phba->total_scsi_bufs;
5481 num_to_alloc = vport->cfg_lun_queue_depth + 2;
5482
5483 /* If allocated buffers are enough do nothing */
5484 if ((sdev_cnt * (vport->cfg_lun_queue_depth + 2)) < total)
5485 return 0;
5486
5487 /* Allow some exchanges to be available always to complete discovery */
5488 if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
5489 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
5490 "0704 At limitation of %d preallocated "
5491 "command buffers\n", total);
5492 return 0;
5493 /* Allow some exchanges to be available always to complete discovery */
5494 } else if (total + num_to_alloc >
5495 phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
5496 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
5497 "0705 Allocation request of %d "
5498 "command buffers will exceed max of %d. "
5499 "Reducing allocation request to %d.\n",
5500 num_to_alloc, phba->cfg_hba_queue_depth,
5501 (phba->cfg_hba_queue_depth - total));
5502 num_to_alloc = phba->cfg_hba_queue_depth - total;
5503 }
5504 num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
5505 if (num_to_alloc != num_allocated) {
5506 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5507 "0708 Allocation request of %d "
5508 "command buffers did not succeed. "
5509 "Allocated %d buffers.\n",
5510 num_to_alloc, num_allocated);
5511 }
5512 if (num_allocated > 0)
5513 phba->total_scsi_bufs += num_allocated;
5514 return 0;
5515 }
5516
5517 /**
5518 * lpfc_slave_configure - scsi_host_template slave_configure entry point
5519 * @sdev: Pointer to scsi_device.
5520 *
5521 * This routine configures following items
5522 * - Tag command queuing support for @sdev if supported.
5523 * - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set.
5524 *
5525 * Return codes:
5526 * 0 - Success
5527 **/
5528 static int
5529 lpfc_slave_configure(struct scsi_device *sdev)
5530 {
5531 struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
5532 struct lpfc_hba *phba = vport->phba;
5533
5534 scsi_change_queue_depth(sdev, vport->cfg_lun_queue_depth);
5535
5536 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
5537 lpfc_sli_handle_fast_ring_event(phba,
5538 &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
5539 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
5540 lpfc_poll_rearm_timer(phba);
5541 }
5542
5543 return 0;
5544 }
5545
5546 /**
5547 * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
5548 * @sdev: Pointer to scsi_device.
5549 *
5550 * This routine sets @sdev hostatdata filed to null.
5551 **/
5552 static void
5553 lpfc_slave_destroy(struct scsi_device *sdev)
5554 {
5555 struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
5556 struct lpfc_hba *phba = vport->phba;
5557 unsigned long flags;
5558 struct lpfc_device_data *device_data = sdev->hostdata;
5559
5560 atomic_dec(&phba->sdev_cnt);
5561 if ((phba->cfg_fof) && (device_data)) {
5562 spin_lock_irqsave(&phba->devicelock, flags);
5563 device_data->available = false;
5564 if (!device_data->oas_enabled)
5565 lpfc_delete_device_data(phba, device_data);
5566 spin_unlock_irqrestore(&phba->devicelock, flags);
5567 }
5568 sdev->hostdata = NULL;
5569 return;
5570 }
5571
5572 /**
5573 * lpfc_create_device_data - creates and initializes device data structure for OAS
5574 * @pha: Pointer to host bus adapter structure.
5575 * @vport_wwpn: Pointer to vport's wwpn information
5576 * @target_wwpn: Pointer to target's wwpn information
5577 * @lun: Lun on target
5578 * @atomic_create: Flag to indicate if memory should be allocated using the
5579 * GFP_ATOMIC flag or not.
5580 *
5581 * This routine creates a device data structure which will contain identifying
5582 * information for the device (host wwpn, target wwpn, lun), state of OAS,
5583 * whether or not the corresponding lun is available by the system,
5584 * and pointer to the rport data.
5585 *
5586 * Return codes:
5587 * NULL - Error
5588 * Pointer to lpfc_device_data - Success
5589 **/
5590 struct lpfc_device_data*
5591 lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5592 struct lpfc_name *target_wwpn, uint64_t lun,
5593 bool atomic_create)
5594 {
5595
5596 struct lpfc_device_data *lun_info;
5597 int memory_flags;
5598
5599 if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5600 !(phba->cfg_fof))
5601 return NULL;
5602
5603 /* Attempt to create the device data to contain lun info */
5604
5605 if (atomic_create)
5606 memory_flags = GFP_ATOMIC;
5607 else
5608 memory_flags = GFP_KERNEL;
5609 lun_info = mempool_alloc(phba->device_data_mem_pool, memory_flags);
5610 if (!lun_info)
5611 return NULL;
5612 INIT_LIST_HEAD(&lun_info->listentry);
5613 lun_info->rport_data = NULL;
5614 memcpy(&lun_info->device_id.vport_wwpn, vport_wwpn,
5615 sizeof(struct lpfc_name));
5616 memcpy(&lun_info->device_id.target_wwpn, target_wwpn,
5617 sizeof(struct lpfc_name));
5618 lun_info->device_id.lun = lun;
5619 lun_info->oas_enabled = false;
5620 lun_info->available = false;
5621 return lun_info;
5622 }
5623
5624 /**
5625 * lpfc_delete_device_data - frees a device data structure for OAS
5626 * @pha: Pointer to host bus adapter structure.
5627 * @lun_info: Pointer to device data structure to free.
5628 *
5629 * This routine frees the previously allocated device data structure passed.
5630 *
5631 **/
5632 void
5633 lpfc_delete_device_data(struct lpfc_hba *phba,
5634 struct lpfc_device_data *lun_info)
5635 {
5636
5637 if (unlikely(!phba) || !lun_info ||
5638 !(phba->cfg_fof))
5639 return;
5640
5641 if (!list_empty(&lun_info->listentry))
5642 list_del(&lun_info->listentry);
5643 mempool_free(lun_info, phba->device_data_mem_pool);
5644 return;
5645 }
5646
5647 /**
5648 * __lpfc_get_device_data - returns the device data for the specified lun
5649 * @pha: Pointer to host bus adapter structure.
5650 * @list: Point to list to search.
5651 * @vport_wwpn: Pointer to vport's wwpn information
5652 * @target_wwpn: Pointer to target's wwpn information
5653 * @lun: Lun on target
5654 *
5655 * This routine searches the list passed for the specified lun's device data.
5656 * This function does not hold locks, it is the responsibility of the caller
5657 * to ensure the proper lock is held before calling the function.
5658 *
5659 * Return codes:
5660 * NULL - Error
5661 * Pointer to lpfc_device_data - Success
5662 **/
5663 struct lpfc_device_data*
5664 __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
5665 struct lpfc_name *vport_wwpn,
5666 struct lpfc_name *target_wwpn, uint64_t lun)
5667 {
5668
5669 struct lpfc_device_data *lun_info;
5670
5671 if (unlikely(!phba) || !list || !vport_wwpn || !target_wwpn ||
5672 !phba->cfg_fof)
5673 return NULL;
5674
5675 /* Check to see if the lun is already enabled for OAS. */
5676
5677 list_for_each_entry(lun_info, list, listentry) {
5678 if ((memcmp(&lun_info->device_id.vport_wwpn, vport_wwpn,
5679 sizeof(struct lpfc_name)) == 0) &&
5680 (memcmp(&lun_info->device_id.target_wwpn, target_wwpn,
5681 sizeof(struct lpfc_name)) == 0) &&
5682 (lun_info->device_id.lun == lun))
5683 return lun_info;
5684 }
5685
5686 return NULL;
5687 }
5688
5689 /**
5690 * lpfc_find_next_oas_lun - searches for the next oas lun
5691 * @pha: Pointer to host bus adapter structure.
5692 * @vport_wwpn: Pointer to vport's wwpn information
5693 * @target_wwpn: Pointer to target's wwpn information
5694 * @starting_lun: Pointer to the lun to start searching for
5695 * @found_vport_wwpn: Pointer to the found lun's vport wwpn information
5696 * @found_target_wwpn: Pointer to the found lun's target wwpn information
5697 * @found_lun: Pointer to the found lun.
5698 * @found_lun_status: Pointer to status of the found lun.
5699 *
5700 * This routine searches the luns list for the specified lun
5701 * or the first lun for the vport/target. If the vport wwpn contains
5702 * a zero value then a specific vport is not specified. In this case
5703 * any vport which contains the lun will be considered a match. If the
5704 * target wwpn contains a zero value then a specific target is not specified.
5705 * In this case any target which contains the lun will be considered a
5706 * match. If the lun is found, the lun, vport wwpn, target wwpn and lun status
5707 * are returned. The function will also return the next lun if available.
5708 * If the next lun is not found, starting_lun parameter will be set to
5709 * NO_MORE_OAS_LUN.
5710 *
5711 * Return codes:
5712 * non-0 - Error
5713 * 0 - Success
5714 **/
5715 bool
5716 lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5717 struct lpfc_name *target_wwpn, uint64_t *starting_lun,
5718 struct lpfc_name *found_vport_wwpn,
5719 struct lpfc_name *found_target_wwpn,
5720 uint64_t *found_lun,
5721 uint32_t *found_lun_status)
5722 {
5723
5724 unsigned long flags;
5725 struct lpfc_device_data *lun_info;
5726 struct lpfc_device_id *device_id;
5727 uint64_t lun;
5728 bool found = false;
5729
5730 if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5731 !starting_lun || !found_vport_wwpn ||
5732 !found_target_wwpn || !found_lun || !found_lun_status ||
5733 (*starting_lun == NO_MORE_OAS_LUN) ||
5734 !phba->cfg_fof)
5735 return false;
5736
5737 lun = *starting_lun;
5738 *found_lun = NO_MORE_OAS_LUN;
5739 *starting_lun = NO_MORE_OAS_LUN;
5740
5741 /* Search for lun or the lun closet in value */
5742
5743 spin_lock_irqsave(&phba->devicelock, flags);
5744 list_for_each_entry(lun_info, &phba->luns, listentry) {
5745 if (((wwn_to_u64(vport_wwpn->u.wwn) == 0) ||
5746 (memcmp(&lun_info->device_id.vport_wwpn, vport_wwpn,
5747 sizeof(struct lpfc_name)) == 0)) &&
5748 ((wwn_to_u64(target_wwpn->u.wwn) == 0) ||
5749 (memcmp(&lun_info->device_id.target_wwpn, target_wwpn,
5750 sizeof(struct lpfc_name)) == 0)) &&
5751 (lun_info->oas_enabled)) {
5752 device_id = &lun_info->device_id;
5753 if ((!found) &&
5754 ((lun == FIND_FIRST_OAS_LUN) ||
5755 (device_id->lun == lun))) {
5756 *found_lun = device_id->lun;
5757 memcpy(found_vport_wwpn,
5758 &device_id->vport_wwpn,
5759 sizeof(struct lpfc_name));
5760 memcpy(found_target_wwpn,
5761 &device_id->target_wwpn,
5762 sizeof(struct lpfc_name));
5763 if (lun_info->available)
5764 *found_lun_status =
5765 OAS_LUN_STATUS_EXISTS;
5766 else
5767 *found_lun_status = 0;
5768 if (phba->cfg_oas_flags & OAS_FIND_ANY_VPORT)
5769 memset(vport_wwpn, 0x0,
5770 sizeof(struct lpfc_name));
5771 if (phba->cfg_oas_flags & OAS_FIND_ANY_TARGET)
5772 memset(target_wwpn, 0x0,
5773 sizeof(struct lpfc_name));
5774 found = true;
5775 } else if (found) {
5776 *starting_lun = device_id->lun;
5777 memcpy(vport_wwpn, &device_id->vport_wwpn,
5778 sizeof(struct lpfc_name));
5779 memcpy(target_wwpn, &device_id->target_wwpn,
5780 sizeof(struct lpfc_name));
5781 break;
5782 }
5783 }
5784 }
5785 spin_unlock_irqrestore(&phba->devicelock, flags);
5786 return found;
5787 }
5788
5789 /**
5790 * lpfc_enable_oas_lun - enables a lun for OAS operations
5791 * @pha: Pointer to host bus adapter structure.
5792 * @vport_wwpn: Pointer to vport's wwpn information
5793 * @target_wwpn: Pointer to target's wwpn information
5794 * @lun: Lun
5795 *
5796 * This routine enables a lun for oas operations. The routines does so by
5797 * doing the following :
5798 *
5799 * 1) Checks to see if the device data for the lun has been created.
5800 * 2) If found, sets the OAS enabled flag if not set and returns.
5801 * 3) Otherwise, creates a device data structure.
5802 * 4) If successfully created, indicates the device data is for an OAS lun,
5803 * indicates the lun is not available and add to the list of luns.
5804 *
5805 * Return codes:
5806 * false - Error
5807 * true - Success
5808 **/
5809 bool
5810 lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5811 struct lpfc_name *target_wwpn, uint64_t lun)
5812 {
5813
5814 struct lpfc_device_data *lun_info;
5815 unsigned long flags;
5816
5817 if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5818 !phba->cfg_fof)
5819 return false;
5820
5821 spin_lock_irqsave(&phba->devicelock, flags);
5822
5823 /* Check to see if the device data for the lun has been created */
5824 lun_info = __lpfc_get_device_data(phba, &phba->luns, vport_wwpn,
5825 target_wwpn, lun);
5826 if (lun_info) {
5827 if (!lun_info->oas_enabled)
5828 lun_info->oas_enabled = true;
5829 spin_unlock_irqrestore(&phba->devicelock, flags);
5830 return true;
5831 }
5832
5833 /* Create an lun info structure and add to list of luns */
5834 lun_info = lpfc_create_device_data(phba, vport_wwpn, target_wwpn, lun,
5835 false);
5836 if (lun_info) {
5837 lun_info->oas_enabled = true;
5838 lun_info->available = false;
5839 list_add_tail(&lun_info->listentry, &phba->luns);
5840 spin_unlock_irqrestore(&phba->devicelock, flags);
5841 return true;
5842 }
5843 spin_unlock_irqrestore(&phba->devicelock, flags);
5844 return false;
5845 }
5846
5847 /**
5848 * lpfc_disable_oas_lun - disables a lun for OAS operations
5849 * @pha: Pointer to host bus adapter structure.
5850 * @vport_wwpn: Pointer to vport's wwpn information
5851 * @target_wwpn: Pointer to target's wwpn information
5852 * @lun: Lun
5853 *
5854 * This routine disables a lun for oas operations. The routines does so by
5855 * doing the following :
5856 *
5857 * 1) Checks to see if the device data for the lun is created.
5858 * 2) If present, clears the flag indicating this lun is for OAS.
5859 * 3) If the lun is not available by the system, the device data is
5860 * freed.
5861 *
5862 * Return codes:
5863 * false - Error
5864 * true - Success
5865 **/
5866 bool
5867 lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5868 struct lpfc_name *target_wwpn, uint64_t lun)
5869 {
5870
5871 struct lpfc_device_data *lun_info;
5872 unsigned long flags;
5873
5874 if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5875 !phba->cfg_fof)
5876 return false;
5877
5878 spin_lock_irqsave(&phba->devicelock, flags);
5879
5880 /* Check to see if the lun is available. */
5881 lun_info = __lpfc_get_device_data(phba,
5882 &phba->luns, vport_wwpn,
5883 target_wwpn, lun);
5884 if (lun_info) {
5885 lun_info->oas_enabled = false;
5886 if (!lun_info->available)
5887 lpfc_delete_device_data(phba, lun_info);
5888 spin_unlock_irqrestore(&phba->devicelock, flags);
5889 return true;
5890 }
5891
5892 spin_unlock_irqrestore(&phba->devicelock, flags);
5893 return false;
5894 }
5895
5896 struct scsi_host_template lpfc_template_s3 = {
5897 .module = THIS_MODULE,
5898 .name = LPFC_DRIVER_NAME,
5899 .info = lpfc_info,
5900 .queuecommand = lpfc_queuecommand,
5901 .eh_abort_handler = lpfc_abort_handler,
5902 .eh_device_reset_handler = lpfc_device_reset_handler,
5903 .eh_target_reset_handler = lpfc_target_reset_handler,
5904 .eh_bus_reset_handler = lpfc_bus_reset_handler,
5905 .slave_alloc = lpfc_slave_alloc,
5906 .slave_configure = lpfc_slave_configure,
5907 .slave_destroy = lpfc_slave_destroy,
5908 .scan_finished = lpfc_scan_finished,
5909 .this_id = -1,
5910 .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
5911 .cmd_per_lun = LPFC_CMD_PER_LUN,
5912 .use_clustering = ENABLE_CLUSTERING,
5913 .shost_attrs = lpfc_hba_attrs,
5914 .max_sectors = 0xFFFF,
5915 .vendor_id = LPFC_NL_VENDOR_ID,
5916 .change_queue_depth = scsi_change_queue_depth,
5917 .track_queue_depth = 1,
5918 };
5919
5920 struct scsi_host_template lpfc_template = {
5921 .module = THIS_MODULE,
5922 .name = LPFC_DRIVER_NAME,
5923 .info = lpfc_info,
5924 .queuecommand = lpfc_queuecommand,
5925 .eh_abort_handler = lpfc_abort_handler,
5926 .eh_device_reset_handler = lpfc_device_reset_handler,
5927 .eh_target_reset_handler = lpfc_target_reset_handler,
5928 .eh_bus_reset_handler = lpfc_bus_reset_handler,
5929 .eh_host_reset_handler = lpfc_host_reset_handler,
5930 .slave_alloc = lpfc_slave_alloc,
5931 .slave_configure = lpfc_slave_configure,
5932 .slave_destroy = lpfc_slave_destroy,
5933 .scan_finished = lpfc_scan_finished,
5934 .this_id = -1,
5935 .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
5936 .cmd_per_lun = LPFC_CMD_PER_LUN,
5937 .use_clustering = ENABLE_CLUSTERING,
5938 .shost_attrs = lpfc_hba_attrs,
5939 .max_sectors = 0xFFFF,
5940 .vendor_id = LPFC_NL_VENDOR_ID,
5941 .change_queue_depth = scsi_change_queue_depth,
5942 .track_queue_depth = 1,
5943 };
5944
5945 struct scsi_host_template lpfc_vport_template = {
5946 .module = THIS_MODULE,
5947 .name = LPFC_DRIVER_NAME,
5948 .info = lpfc_info,
5949 .queuecommand = lpfc_queuecommand,
5950 .eh_abort_handler = lpfc_abort_handler,
5951 .eh_device_reset_handler = lpfc_device_reset_handler,
5952 .eh_target_reset_handler = lpfc_target_reset_handler,
5953 .eh_bus_reset_handler = lpfc_bus_reset_handler,
5954 .slave_alloc = lpfc_slave_alloc,
5955 .slave_configure = lpfc_slave_configure,
5956 .slave_destroy = lpfc_slave_destroy,
5957 .scan_finished = lpfc_scan_finished,
5958 .this_id = -1,
5959 .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
5960 .cmd_per_lun = LPFC_CMD_PER_LUN,
5961 .use_clustering = ENABLE_CLUSTERING,
5962 .shost_attrs = lpfc_vport_attrs,
5963 .max_sectors = 0xFFFF,
5964 .change_queue_depth = scsi_change_queue_depth,
5965 .track_queue_depth = 1,
5966 };
Linux with added FPC-III support