Linux 5.4.41
[linux/fpc-iii.git] / drivers / leds / leds-lp3952.c
blob4e4e542774cba25a12f5109e103d8ea22c613543
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * LED driver for TI lp3952 controller
5 * Copyright (C) 2016, DAQRI, LLC.
6 * Author: Tony Makkiel <tony.makkiel@daqri.com>
7 */
9 #include <linux/delay.h>
10 #include <linux/gpio.h>
11 #include <linux/i2c.h>
12 #include <linux/io.h>
13 #include <linux/kernel.h>
14 #include <linux/leds.h>
15 #include <linux/leds-lp3952.h>
16 #include <linux/module.h>
17 #include <linux/notifier.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm.h>
20 #include <linux/reboot.h>
21 #include <linux/regmap.h>
23 static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val)
25 int ret;
26 struct lp3952_led_array *priv = i2c_get_clientdata(client);
28 ret = regmap_write(priv->regmap, reg, val);
30 if (ret)
31 dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
32 __func__, reg, val, ret);
33 return ret;
36 static void lp3952_on_off(struct lp3952_led_array *priv,
37 enum lp3952_leds led_id, bool on)
39 int ret, val;
41 dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on);
43 val = 1 << led_id;
44 if (led_id == LP3952_LED_ALL)
45 val = LP3952_LED_MASK_ALL;
47 ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val,
48 on ? val : 0);
49 if (ret)
50 dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret);
54 * Using Imax to control brightness. There are 4 possible
55 * setting 25, 50, 75 and 100 % of Imax. Possible values are
56 * values 0-4. 0 meaning turn off.
58 static int lp3952_set_brightness(struct led_classdev *cdev,
59 enum led_brightness value)
61 unsigned int reg, shift_val;
62 struct lp3952_ctrl_hdl *led = container_of(cdev,
63 struct lp3952_ctrl_hdl,
64 cdev);
65 struct lp3952_led_array *priv = (struct lp3952_led_array *)led->priv;
67 dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value,
68 led->channel);
70 if (value == LED_OFF) {
71 lp3952_on_off(priv, led->channel, false);
72 return 0;
75 if (led->channel > LP3952_RED_1) {
76 dev_err(cdev->dev, " %s Invalid LED requested", __func__);
77 return -EINVAL;
80 if (led->channel >= LP3952_BLUE_1) {
81 reg = LP3952_REG_RGB1_MAX_I_CTRL;
82 shift_val = (led->channel - LP3952_BLUE_1) * 2;
83 } else {
84 reg = LP3952_REG_RGB2_MAX_I_CTRL;
85 shift_val = led->channel * 2;
88 /* Enable the LED in case it is not enabled already */
89 lp3952_on_off(priv, led->channel, true);
91 return regmap_update_bits(priv->regmap, reg, 3 << shift_val,
92 --value << shift_val);
95 static int lp3952_get_label(struct device *dev, const char *label, char *dest)
97 int ret;
98 const char *str;
100 ret = device_property_read_string(dev, label, &str);
101 if (ret)
102 return ret;
104 strncpy(dest, str, LP3952_LABEL_MAX_LEN);
105 return 0;
108 static int lp3952_register_led_classdev(struct lp3952_led_array *priv)
110 int i, acpi_ret, ret = -ENODEV;
111 static const char *led_name_hdl[LP3952_LED_ALL] = {
112 "blue2",
113 "green2",
114 "red2",
115 "blue1",
116 "green1",
117 "red1"
120 for (i = 0; i < LP3952_LED_ALL; i++) {
121 acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i],
122 priv->leds[i].name);
123 if (acpi_ret)
124 continue;
126 priv->leds[i].cdev.name = priv->leds[i].name;
127 priv->leds[i].cdev.brightness = LED_OFF;
128 priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX;
129 priv->leds[i].cdev.brightness_set_blocking =
130 lp3952_set_brightness;
131 priv->leds[i].channel = i;
132 priv->leds[i].priv = priv;
134 ret = devm_led_classdev_register(&priv->client->dev,
135 &priv->leds[i].cdev);
136 if (ret < 0) {
137 dev_err(&priv->client->dev,
138 "couldn't register LED %s\n",
139 priv->leds[i].cdev.name);
140 break;
143 return ret;
146 static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv,
147 u8 cmd_index, u8 r, u8 g, u8 b,
148 enum lp3952_tt tt, enum lp3952_cet cet)
150 int ret;
151 struct ptrn_gen_cmd line = {
154 .r = r,
155 .g = g,
156 .b = b,
157 .cet = cet,
158 .tt = tt
163 if (cmd_index >= LP3952_CMD_REG_COUNT)
164 return -EINVAL;
166 ret = lp3952_register_write(priv->client,
167 LP3952_REG_CMD_0 + cmd_index * 2,
168 line.bytes.msb);
169 if (ret)
170 return ret;
172 return lp3952_register_write(priv->client,
173 LP3952_REG_CMD_0 + cmd_index * 2 + 1,
174 line.bytes.lsb);
177 static int lp3952_configure(struct lp3952_led_array *priv)
179 int ret;
181 /* Disable any LEDs on from any previous conf. */
182 ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0);
183 if (ret)
184 return ret;
186 /* enable rgb patter, loop */
187 ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL,
188 LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN);
189 if (ret)
190 return ret;
192 /* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */
193 ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES,
194 LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR);
195 if (ret)
196 return ret;
198 /* Set Cmd1 for RGB intensity,cmd and transition time */
199 return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0,
200 CET197);
203 static const struct regmap_config lp3952_regmap = {
204 .reg_bits = 8,
205 .val_bits = 8,
206 .max_register = REG_MAX,
207 .cache_type = REGCACHE_RBTREE,
210 static int lp3952_probe(struct i2c_client *client,
211 const struct i2c_device_id *id)
213 int status;
214 struct lp3952_led_array *priv;
216 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
217 if (!priv)
218 return -ENOMEM;
220 priv->client = client;
222 priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst",
223 GPIOD_OUT_HIGH);
224 if (IS_ERR(priv->enable_gpio)) {
225 status = PTR_ERR(priv->enable_gpio);
226 dev_err(&client->dev, "Failed to enable gpio: %d\n", status);
227 return status;
230 priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
231 if (IS_ERR(priv->regmap)) {
232 int err = PTR_ERR(priv->regmap);
234 dev_err(&client->dev, "Failed to allocate register map: %d\n",
235 err);
236 return err;
239 i2c_set_clientdata(client, priv);
241 status = lp3952_configure(priv);
242 if (status) {
243 dev_err(&client->dev, "Probe failed. Device not found (%d)\n",
244 status);
245 return status;
248 status = lp3952_register_led_classdev(priv);
249 if (status) {
250 dev_err(&client->dev, "Unable to register led_classdev: %d\n",
251 status);
252 return status;
255 return 0;
258 static int lp3952_remove(struct i2c_client *client)
260 struct lp3952_led_array *priv;
262 priv = i2c_get_clientdata(client);
263 lp3952_on_off(priv, LP3952_LED_ALL, false);
264 gpiod_set_value(priv->enable_gpio, 0);
266 return 0;
269 static const struct i2c_device_id lp3952_id[] = {
270 {LP3952_NAME, 0},
273 MODULE_DEVICE_TABLE(i2c, lp3952_id);
275 static struct i2c_driver lp3952_i2c_driver = {
276 .driver = {
277 .name = LP3952_NAME,
279 .probe = lp3952_probe,
280 .remove = lp3952_remove,
281 .id_table = lp3952_id,
284 module_i2c_driver(lp3952_i2c_driver);
286 MODULE_AUTHOR("Tony Makkiel <tony.makkiel@daqri.com>");
287 MODULE_DESCRIPTION("lp3952 I2C LED controller driver");
288 MODULE_LICENSE("GPL v2");