arch/i386/mach-visws/visws_apic.c

   1 /*
   2  *      linux/arch/i386/mach_visws/visws_apic.c
   3  *
   4  *      Copyright (C) 1999 Bent Hagemark, Ingo Molnar
   5  *
   6  *  SGI Visual Workstation interrupt controller
   7  *
   8  *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
   9  *  which serves as the main interrupt controller in the system.  Non-legacy
  10  *  hardware in the system uses this controller directly.  Legacy devices
  11  *  are connected to the PIIX4 which in turn has its 8259(s) connected to
  12  *  a of the Cobalt APIC entry.
  13  *
  14  *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
  15  *
  16  *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
  17  */
  18
  19 #include <linux/config.h>
  20 #include <linux/kernel_stat.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/smp_lock.h>
  23 #include <linux/init.h>
  24
  25 #include <asm/io.h>
  26 #include <asm/apic.h>
  27 #include <asm/i8259.h>
  28
  29 #include "cobalt.h"
  30 #include "irq_vectors.h"
  31
  32
  33 static DEFINE_SPINLOCK(cobalt_lock);
  34
  35 /*
  36  * Set the given Cobalt APIC Redirection Table entry to point
  37  * to the given IDT vector/index.
  38  */
  39 static inline void co_apic_set(int entry, int irq)
  40 {
  41         co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
  42         co_apic_write(CO_APIC_HI(entry), 0);
  43 }
  44
  45 /*
  46  * Cobalt (IO)-APIC functions to handle PCI devices.
  47  */
  48 static inline int co_apic_ide0_hack(void)
  49 {
  50         extern char visws_board_type;
  51         extern char visws_board_rev;
  52
  53         if (visws_board_type == VISWS_320 && visws_board_rev == 5)
  54                 return 5;
  55         return CO_APIC_IDE0;
  56 }
  57
  58 static int is_co_apic(unsigned int irq)
  59 {
  60         if (IS_CO_APIC(irq))
  61                 return CO_APIC(irq);
  62
  63         switch (irq) {
  64                 case 0: return CO_APIC_CPU;
  65                 case CO_IRQ_IDE0: return co_apic_ide0_hack();
  66                 case CO_IRQ_IDE1: return CO_APIC_IDE1;
  67                 default: return -1;
  68         }
  69 }
  70
  71
  72 /*
  73  * This is the SGI Cobalt (IO-)APIC:
  74  */
  75
  76 static void enable_cobalt_irq(unsigned int irq)
  77 {
  78         co_apic_set(is_co_apic(irq), irq);
  79 }
  80
  81 static void disable_cobalt_irq(unsigned int irq)
  82 {
  83         int entry = is_co_apic(irq);
  84
  85         co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
  86         co_apic_read(CO_APIC_LO(entry));
  87 }
  88
  89 /*
  90  * "irq" really just serves to identify the device.  Here is where we
  91  * map this to the Cobalt APIC entry where it's physically wired.
  92  * This is called via request_irq -> setup_irq -> irq_desc->startup()
  93  */
  94 static unsigned int startup_cobalt_irq(unsigned int irq)
  95 {
  96         unsigned long flags;
  97
  98         spin_lock_irqsave(&cobalt_lock, flags);
  99         if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
 100                 irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
 101         enable_cobalt_irq(irq);
 102         spin_unlock_irqrestore(&cobalt_lock, flags);
 103         return 0;
 104 }
 105
 106 static void ack_cobalt_irq(unsigned int irq)
 107 {
 108         unsigned long flags;
 109
 110         spin_lock_irqsave(&cobalt_lock, flags);
 111         disable_cobalt_irq(irq);
 112         apic_write(APIC_EOI, APIC_EIO_ACK);
 113         spin_unlock_irqrestore(&cobalt_lock, flags);
 114 }
 115
 116 static void end_cobalt_irq(unsigned int irq)
 117 {
 118         unsigned long flags;
 119
 120         spin_lock_irqsave(&cobalt_lock, flags);
 121         if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
 122                 enable_cobalt_irq(irq);
 123         spin_unlock_irqrestore(&cobalt_lock, flags);
 124 }
 125
 126 static struct hw_interrupt_type cobalt_irq_type = {
 127         .typename =     "Cobalt-APIC",
 128         .startup =      startup_cobalt_irq,
 129         .shutdown =     disable_cobalt_irq,
 130         .enable =       enable_cobalt_irq,
 131         .disable =      disable_cobalt_irq,
 132         .ack =          ack_cobalt_irq,
 133         .end =          end_cobalt_irq,
 134 };
 135
 136
 137 /*
 138  * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
 139  * -- not the manner expected by the code in i8259.c.
 140  *
 141  * there is a 'master' physical interrupt source that gets sent to
 142  * the CPU. But in the chipset there are various 'virtual' interrupts
 143  * waiting to be handled. We represent this to Linux through a 'master'
 144  * interrupt controller type, and through a special virtual interrupt-
 145  * controller. Device drivers only see the virtual interrupt sources.
 146  */
 147 static unsigned int startup_piix4_master_irq(unsigned int irq)
 148 {
 149         init_8259A(0);
 150
 151         return startup_cobalt_irq(irq);
 152 }
 153
 154 static void end_piix4_master_irq(unsigned int irq)
 155 {
 156         unsigned long flags;
 157
 158         spin_lock_irqsave(&cobalt_lock, flags);
 159         enable_cobalt_irq(irq);
 160         spin_unlock_irqrestore(&cobalt_lock, flags);
 161 }
 162
 163 static struct hw_interrupt_type piix4_master_irq_type = {
 164         .typename =     "PIIX4-master",
 165         .startup =      startup_piix4_master_irq,
 166         .ack =          ack_cobalt_irq,
 167         .end =          end_piix4_master_irq,
 168 };
 169
 170
 171 static struct hw_interrupt_type piix4_virtual_irq_type = {
 172         .typename =     "PIIX4-virtual",
 173         .startup =      startup_8259A_irq,
 174         .shutdown =     disable_8259A_irq,
 175         .enable =       enable_8259A_irq,
 176         .disable =      disable_8259A_irq,
 177 };
 178
 179
 180 /*
 181  * PIIX4-8259 master/virtual functions to handle interrupt requests
 182  * from legacy devices: floppy, parallel, serial, rtc.
 183  *
 184  * None of these get Cobalt APIC entries, neither do they have IDT
 185  * entries. These interrupts are purely virtual and distributed from
 186  * the 'master' interrupt source: CO_IRQ_8259.
 187  *
 188  * When the 8259 interrupts its handler figures out which of these
 189  * devices is interrupting and dispatches to its handler.
 190  *
 191  * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
 192  * enable_irq gets the right irq. This 'master' irq is never directly
 193  * manipulated by any driver.
 194  */
 195 static irqreturn_t piix4_master_intr(int irq, void *dev_id, struct pt_regs * regs)
 196 {
 197         int realirq;
 198         irq_desc_t *desc;
 199         unsigned long flags;
 200
 201         spin_lock_irqsave(&i8259A_lock, flags);
 202
 203         /* Find out what's interrupting in the PIIX4 master 8259 */
 204         outb(0x0c, 0x20);               /* OCW3 Poll command */
 205         realirq = inb(0x20);
 206
 207         /*
 208          * Bit 7 == 0 means invalid/spurious
 209          */
 210         if (unlikely(!(realirq & 0x80)))
 211                 goto out_unlock;
 212
 213         realirq &= 7;
 214
 215         if (unlikely(realirq == 2)) {
 216                 outb(0x0c, 0xa0);
 217                 realirq = inb(0xa0);
 218
 219                 if (unlikely(!(realirq & 0x80)))
 220                         goto out_unlock;
 221
 222                 realirq = (realirq & 7) + 8;
 223         }
 224
 225         /* mask and ack interrupt */
 226         cached_irq_mask |= 1 << realirq;
 227         if (unlikely(realirq > 7)) {
 228                 inb(0xa1);
 229                 outb(cached_slave_mask, 0xa1);
 230                 outb(0x60 + (realirq & 7), 0xa0);
 231                 outb(0x60 + 2, 0x20);
 232         } else {
 233                 inb(0x21);
 234                 outb(cached_master_mask, 0x21);
 235                 outb(0x60 + realirq, 0x20);
 236         }
 237
 238         spin_unlock_irqrestore(&i8259A_lock, flags);
 239
 240         desc = irq_desc + realirq;
 241
 242         /*
 243          * handle this 'virtual interrupt' as a Cobalt one now.
 244          */
 245         kstat_cpu(smp_processor_id()).irqs[realirq]++;
 246
 247         if (likely(desc->action != NULL))
 248                 handle_IRQ_event(realirq, regs, desc->action);
 249
 250         if (!(desc->status & IRQ_DISABLED))
 251                 enable_8259A_irq(realirq);
 252
 253         return IRQ_HANDLED;
 254
 255 out_unlock:
 256         spin_unlock_irqrestore(&i8259A_lock, flags);
 257         return IRQ_NONE;
 258 }
 259
 260 static struct irqaction master_action = {
 261         .handler =      piix4_master_intr,
 262         .name =         "PIIX4-8259",
 263 };
 264
 265 static struct irqaction cascade_action = {
 266         .handler =      no_action,
 267         .name =         "cascade",
 268 };
 269
 270
 271 void init_VISWS_APIC_irqs(void)
 272 {
 273         int i;
 274
 275         for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
 276                 irq_desc[i].status = IRQ_DISABLED;
 277                 irq_desc[i].action = 0;
 278                 irq_desc[i].depth = 1;
 279
 280                 if (i == 0) {
 281                         irq_desc[i].handler = &cobalt_irq_type;
 282                 }
 283                 else if (i == CO_IRQ_IDE0) {
 284                         irq_desc[i].handler = &cobalt_irq_type;
 285                 }
 286                 else if (i == CO_IRQ_IDE1) {
 287                         irq_desc[i].handler = &cobalt_irq_type;
 288                 }
 289                 else if (i == CO_IRQ_8259) {
 290                         irq_desc[i].handler = &piix4_master_irq_type;
 291                 }
 292                 else if (i < CO_IRQ_APIC0) {
 293                         irq_desc[i].handler = &piix4_virtual_irq_type;
 294                 }
 295                 else if (IS_CO_APIC(i)) {
 296                         irq_desc[i].handler = &cobalt_irq_type;
 297                 }
 298         }
 299
 300         setup_irq(CO_IRQ_8259, &master_action);
 301         setup_irq(2, &cascade_action);
 302 }