media: dvb_demux.h: get rid of DMX_FEED_ENTRY() macro

[linux/fpc-iii.git] / include / drm / drm_modes.h

/*
 * Copyright © 2006 Keith Packard
 * Copyright © 2007-2008 Dave Airlie
 * Copyright © 2007-2008 Intel Corporation
 *   Jesse Barnes <jesse.barnes@intel.com>
 * Copyright © 2014 Intel Corporation
 *   Daniel Vetter <daniel.vetter@ffwll.ch>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */
#ifndef __DRM_MODES_H__
#define __DRM_MODES_H__

#include <linux/hdmi.h>

#include <drm/drm_mode_object.h>
#include <drm/drm_connector.h>

struct videomode;

/*
 * Note on terminology:  here, for brevity and convenience, we refer to connector
 * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,
 * DVI, etc.  And 'screen' refers to the whole of the visible display, which
 * may span multiple monitors (and therefore multiple CRTC and connector
 * structures).
 */

/**
 * enum drm_mode_status - hardware support status of a mode
 * @MODE_OK: Mode OK
 * @MODE_HSYNC: hsync out of range
 * @MODE_VSYNC: vsync out of range
 * @MODE_H_ILLEGAL: mode has illegal horizontal timings
 * @MODE_V_ILLEGAL: mode has illegal horizontal timings
 * @MODE_BAD_WIDTH: requires an unsupported linepitch
 * @MODE_NOMODE: no mode with a matching name
 * @MODE_NO_INTERLACE: interlaced mode not supported
 * @MODE_NO_DBLESCAN: doublescan mode not supported
 * @MODE_NO_VSCAN: multiscan mode not supported
 * @MODE_MEM: insufficient video memory
 * @MODE_VIRTUAL_X: mode width too large for specified virtual size
 * @MODE_VIRTUAL_Y: mode height too large for specified virtual size
 * @MODE_MEM_VIRT: insufficient video memory given virtual size
 * @MODE_NOCLOCK: no fixed clock available
 * @MODE_CLOCK_HIGH: clock required is too high
 * @MODE_CLOCK_LOW: clock required is too low
 * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange
 * @MODE_BAD_HVALUE: horizontal timing was out of range
 * @MODE_BAD_VVALUE: vertical timing was out of range
 * @MODE_BAD_VSCAN: VScan value out of range
 * @MODE_HSYNC_NARROW: horizontal sync too narrow
 * @MODE_HSYNC_WIDE: horizontal sync too wide
 * @MODE_HBLANK_NARROW: horizontal blanking too narrow
 * @MODE_HBLANK_WIDE: horizontal blanking too wide
 * @MODE_VSYNC_NARROW: vertical sync too narrow
 * @MODE_VSYNC_WIDE: vertical sync too wide
 * @MODE_VBLANK_NARROW: vertical blanking too narrow
 * @MODE_VBLANK_WIDE: vertical blanking too wide
 * @MODE_PANEL: exceeds panel dimensions
 * @MODE_INTERLACE_WIDTH: width too large for interlaced mode
 * @MODE_ONE_WIDTH: only one width is supported
 * @MODE_ONE_HEIGHT: only one height is supported
 * @MODE_ONE_SIZE: only one resolution is supported
 * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
 * @MODE_NO_STEREO: stereo modes not supported
 * @MODE_NO_420: ycbcr 420 modes not supported
 * @MODE_STALE: mode has become stale
 * @MODE_BAD: unspecified reason
 * @MODE_ERROR: error condition
 *
 * This enum is used to filter out modes not supported by the driver/hardware
 * combination.
 */
enum drm_mode_status {
        MODE_OK = 0,
        MODE_HSYNC,
        MODE_VSYNC,
        MODE_H_ILLEGAL,
        MODE_V_ILLEGAL,
        MODE_BAD_WIDTH,
        MODE_NOMODE,
        MODE_NO_INTERLACE,
        MODE_NO_DBLESCAN,
        MODE_NO_VSCAN,
        MODE_MEM,
        MODE_VIRTUAL_X,
        MODE_VIRTUAL_Y,
        MODE_MEM_VIRT,
        MODE_NOCLOCK,
        MODE_CLOCK_HIGH,
        MODE_CLOCK_LOW,
        MODE_CLOCK_RANGE,
        MODE_BAD_HVALUE,
        MODE_BAD_VVALUE,
        MODE_BAD_VSCAN,
        MODE_HSYNC_NARROW,
        MODE_HSYNC_WIDE,
        MODE_HBLANK_NARROW,
        MODE_HBLANK_WIDE,
        MODE_VSYNC_NARROW,
        MODE_VSYNC_WIDE,
        MODE_VBLANK_NARROW,
        MODE_VBLANK_WIDE,
        MODE_PANEL,
        MODE_INTERLACE_WIDTH,
        MODE_ONE_WIDTH,
        MODE_ONE_HEIGHT,
        MODE_ONE_SIZE,
        MODE_NO_REDUCED,
        MODE_NO_STEREO,
        MODE_NO_420,
        MODE_STALE = -3,
        MODE_BAD = -2,
        MODE_ERROR = -1
};

#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
                                    DRM_MODE_TYPE_CRTC_C)

#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
        .name = nm, .status = 0, .type = (t), .clock = (c), \
        .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
        .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
        .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
        .vscan = (vs), .flags = (f), \
        .base.type = DRM_MODE_OBJECT_MODE

#define CRTC_INTERLACE_HALVE_V  (1 << 0) /* halve V values for interlacing */
#define CRTC_STEREO_DOUBLE      (1 << 1) /* adjust timings for stereo modes */
#define CRTC_NO_DBLSCAN         (1 << 2) /* don't adjust doublescan */
#define CRTC_NO_VSCAN           (1 << 3) /* don't adjust doublescan */
#define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)

#define DRM_MODE_FLAG_3D_MAX    DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF

/**
 * struct drm_display_mode - DRM kernel-internal display mode structure
 * @hdisplay: horizontal display size
 * @hsync_start: horizontal sync start
 * @hsync_end: horizontal sync end
 * @htotal: horizontal total size
 * @hskew: horizontal skew?!
 * @vdisplay: vertical display size
 * @vsync_start: vertical sync start
 * @vsync_end: vertical sync end
 * @vtotal: vertical total size
 * @vscan: vertical scan?!
 * @crtc_hdisplay: hardware mode horizontal display size
 * @crtc_hblank_start: hardware mode horizontal blank start
 * @crtc_hblank_end: hardware mode horizontal blank end
 * @crtc_hsync_start: hardware mode horizontal sync start
 * @crtc_hsync_end: hardware mode horizontal sync end
 * @crtc_htotal: hardware mode horizontal total size
 * @crtc_hskew: hardware mode horizontal skew?!
 * @crtc_vdisplay: hardware mode vertical display size
 * @crtc_vblank_start: hardware mode vertical blank start
 * @crtc_vblank_end: hardware mode vertical blank end
 * @crtc_vsync_start: hardware mode vertical sync start
 * @crtc_vsync_end: hardware mode vertical sync end
 * @crtc_vtotal: hardware mode vertical total size
 *
 * The horizontal and vertical timings are defined per the following diagram.
 *
 * ::
 *
 *
 *               Active                 Front           Sync           Back
 *              Region                 Porch                          Porch
 *     <-----------------------><----------------><-------------><-------------->
 *       //////////////////////|
 *      ////////////////////// |
 *     //////////////////////  |..................               ................
 *                                                _______________
 *     <----- [hv]display ----->
 *     <------------- [hv]sync_start ------------>
 *     <--------------------- [hv]sync_end --------------------->
 *     <-------------------------------- [hv]total ----------------------------->*
 *
 * This structure contains two copies of timings. First are the plain timings,
 * which specify the logical mode, as it would be for a progressive 1:1 scanout
 * at the refresh rate userspace can observe through vblank timestamps. Then
 * there's the hardware timings, which are corrected for interlacing,
 * double-clocking and similar things. They are provided as a convenience, and
 * can be appropriately computed using drm_mode_set_crtcinfo().
 *
 * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
 */
struct drm_display_mode {
        /**
         * @head:
         *
         * struct list_head for mode lists.
         */
        struct list_head head;

        /**
         * @base:
         *
         * A display mode is a normal modeset object, possibly including public
         * userspace id.
         *
         * FIXME:
         *
         * This can probably be removed since the entire concept of userspace
         * managing modes explicitly has never landed in upstream kernel mode
         * setting support.
         */
        struct drm_mode_object base;

        /**
         * @name:
         *
         * Human-readable name of the mode, filled out with drm_mode_set_name().
         */
        char name[DRM_DISPLAY_MODE_LEN];

        /**
         * @status:
         *
         * Status of the mode, used to filter out modes not supported by the
         * hardware. See enum &drm_mode_status.
         */
        enum drm_mode_status status;

        /**
         * @type:
         *
         * A bitmask of flags, mostly about the source of a mode. Possible flags
         * are:
         *
         *  - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, effectively
         *    unused.
         *  - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
         *    resolution of an LCD panel. There should only be one preferred
         *    mode per connector at any given time.
         *  - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
         *    them really. Drivers must set this bit for all modes they create
         *    and expose to userspace.
         *
         * Plus a big list of flags which shouldn't be used at all, but are
         * still around since these flags are also used in the userspace ABI:
         *
         *  - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
         *    DRM_MODE_TYPE_PREFERRED instead.
         *  - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
         *    which are stuck around for hysterical raisins only. No one has an
         *    idea what they were meant for. Don't use.
         *  - DRM_MODE_TYPE_USERDEF: Mode defined by userspace, again a vestige
         *    from older kms designs where userspace had to first add a custom
         *    mode to the kernel's mode list before it could use it. Don't use.
         */
        unsigned int type;

        /**
         * @clock:
         *
         * Pixel clock in kHz.
         */
        int clock;              /* in kHz */
        int hdisplay;
        int hsync_start;
        int hsync_end;
        int htotal;
        int hskew;
        int vdisplay;
        int vsync_start;
        int vsync_end;
        int vtotal;
        int vscan;
        /**
         * @flags:
         *
         * Sync and timing flags:
         *
         *  - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high.
         *  - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low.
         *  - DRM_MODE_FLAG_PVSYNC: vertical sync is active high.
         *  - DRM_MODE_FLAG_NVSYNC: vertical sync is active low.
         *  - DRM_MODE_FLAG_INTERLACE: mode is interlaced.
         *  - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan.
         *  - DRM_MODE_FLAG_CSYNC: mode uses composite sync.
         *  - DRM_MODE_FLAG_PCSYNC: composite sync is active high.
         *  - DRM_MODE_FLAG_NCSYNC: composite sync is active low.
         *  - DRM_MODE_FLAG_HSKEW: hskew provided (not used?).
         *  - DRM_MODE_FLAG_BCAST: not used?
         *  - DRM_MODE_FLAG_PIXMUX: not used?
         *  - DRM_MODE_FLAG_DBLCLK: double-clocked mode.
         *  - DRM_MODE_FLAG_CLKDIV2: half-clocked mode.
         *
         * Additionally there's flags to specify how 3D modes are packed:
         *
         *  - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode.
         *  - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right.
         *  - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields.
         *  - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines.
         *  - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames.
         *  - DRM_MODE_FLAG_3D_L_DEPTH: ?
         *  - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ?
         *  - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom
         *    parts.
         *  - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
         *    right parts.
         */
        unsigned int flags;

        /**
         * @width_mm:
         *
         * Addressable size of the output in mm, projectors should set this to
         * 0.
         */
        int width_mm;

        /**
         * @height_mm:
         *
         * Addressable size of the output in mm, projectors should set this to
         * 0.
         */
        int height_mm;

        /**
         * @crtc_clock:
         *
         * Actual pixel or dot clock in the hardware. This differs from the
         * logical @clock when e.g. using interlacing, double-clocking, stereo
         * modes or other fancy stuff that changes the timings and signals
         * actually sent over the wire.
         *
         * This is again in kHz.
         *
         * Note that with digital outputs like HDMI or DP there's usually a
         * massive confusion between the dot clock and the signal clock at the
         * bit encoding level. Especially when a 8b/10b encoding is used and the
         * difference is exactly a factor of 10.
         */
        int crtc_clock;
        int crtc_hdisplay;
        int crtc_hblank_start;
        int crtc_hblank_end;
        int crtc_hsync_start;
        int crtc_hsync_end;
        int crtc_htotal;
        int crtc_hskew;
        int crtc_vdisplay;
        int crtc_vblank_start;
        int crtc_vblank_end;
        int crtc_vsync_start;
        int crtc_vsync_end;
        int crtc_vtotal;

        /**
         * @private:
         *
         * Pointer for driver private data. This can only be used for mode
         * objects passed to drivers in modeset operations. It shouldn't be used
         * by atomic drivers since they can store any additional data by
         * subclassing state structures.
         */
        int *private;

        /**
         * @private_flags:
         *
         * Similar to @private, but just an integer.
         */
        int private_flags;

        /**
         * @vrefresh:
         *
         * Vertical refresh rate, for debug output in human readable form. Not
         * used in a functional way.
         *
         * This value is in Hz.
         */
        int vrefresh;

        /**
         * @hsync:
         *
         * Horizontal refresh rate, for debug output in human readable form. Not
         * used in a functional way.
         *
         * This value is in kHz.
         */
        int hsync;

        /**
         * @picture_aspect_ratio:
         *
         * Field for setting the HDMI picture aspect ratio of a mode.
         */
        enum hdmi_picture_aspect picture_aspect_ratio;
};

/**
 * DRM_MODE_FMT - printf string for &struct drm_display_mode
 */
#define DRM_MODE_FMT    "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"

/**
 * DRM_MODE_ARG - printf arguments for &struct drm_display_mode
 * @m: display mode
 */
#define DRM_MODE_ARG(m) \
        (m)->base.id, (m)->name, (m)->vrefresh, (m)->clock, \
        (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
        (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
        (m)->type, (m)->flags

#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)

/**
 * drm_mode_is_stereo - check for stereo mode flags
 * @mode: drm_display_mode to check
 *
 * Returns:
 * True if the mode is one of the stereo modes (like side-by-side), false if
 * not.
 */
static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
{
        return mode->flags & DRM_MODE_FLAG_3D_MASK;
}

struct drm_connector;
struct drm_cmdline_mode;

struct drm_display_mode *drm_mode_create(struct drm_device *dev);
void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
                               const struct drm_display_mode *in);
int drm_mode_convert_umode(struct drm_display_mode *out,
                           const struct drm_mode_modeinfo *in);
void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
bool drm_mode_is_420_only(const struct drm_display_info *display,
                          const struct drm_display_mode *mode);
bool drm_mode_is_420_also(const struct drm_display_info *display,
                          const struct drm_display_mode *mode);
bool drm_mode_is_420(const struct drm_display_info *display,
                     const struct drm_display_mode *mode);

struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
                                      int hdisplay, int vdisplay, int vrefresh,
                                      bool reduced, bool interlaced,
                                      bool margins);
struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
                                      int hdisplay, int vdisplay, int vrefresh,
                                      bool interlaced, int margins);
struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
                                              int hdisplay, int vdisplay,
                                              int vrefresh, bool interlaced,
                                              int margins,
                                              int GTF_M, int GTF_2C,
                                              int GTF_K, int GTF_2J);
void drm_display_mode_from_videomode(const struct videomode *vm,
                                     struct drm_display_mode *dmode);
void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
                                   struct videomode *vm);
void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
int of_get_drm_display_mode(struct device_node *np,
                            struct drm_display_mode *dmode, u32 *bus_flags,
                            int index);

void drm_mode_set_name(struct drm_display_mode *mode);
int drm_mode_hsync(const struct drm_display_mode *mode);
int drm_mode_vrefresh(const struct drm_display_mode *mode);
void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
                            int *hdisplay, int *vdisplay);

void drm_mode_set_crtcinfo(struct drm_display_mode *p,
                           int adjust_flags);
void drm_mode_copy(struct drm_display_mode *dst,
                   const struct drm_display_mode *src);
struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
                                            const struct drm_display_mode *mode);
bool drm_mode_equal(const struct drm_display_mode *mode1,
                    const struct drm_display_mode *mode2);
bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
                              const struct drm_display_mode *mode2);
bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
                                        const struct drm_display_mode *mode2);

/* for use by the crtc helper probe functions */
enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode);
enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
                                            int maxX, int maxY);
enum drm_mode_status
drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
                           struct drm_connector *connector);
void drm_mode_prune_invalid(struct drm_device *dev,
                            struct list_head *mode_list, bool verbose);
void drm_mode_sort(struct list_head *mode_list);
void drm_mode_connector_list_update(struct drm_connector *connector);

/* parsing cmdline modes */
bool
drm_mode_parse_command_line_for_connector(const char *mode_option,
                                          struct drm_connector *connector,
                                          struct drm_cmdline_mode *mode);
struct drm_display_mode *
drm_mode_create_from_cmdline_mode(struct drm_device *dev,
                                  struct drm_cmdline_mode *cmd);

#endif /* __DRM_MODES_H__ */