arch/alpha/kernel/sys_noritake.c

   1 /*
   2  *      linux/arch/alpha/kernel/sys_noritake.c
   3  *
   4  *      Copyright (C) 1995 David A Rusling
   5  *      Copyright (C) 1996 Jay A Estabrook
   6  *      Copyright (C) 1998, 1999 Richard Henderson
   7  *
   8  * Code supporting the NORITAKE (AlphaServer 1000A),
   9  * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/mm.h>
  15 #include <linux/sched.h>
  16 #include <linux/pci.h>
  17 #include <linux/init.h>
  18 #include <linux/bitops.h>
  19
  20 #include <asm/ptrace.h>
  21 #include <asm/mce.h>
  22 #include <asm/dma.h>
  23 #include <asm/irq.h>
  24 #include <asm/mmu_context.h>
  25 #include <asm/io.h>
  26 #include <asm/pgtable.h>
  27 #include <asm/core_apecs.h>
  28 #include <asm/core_cia.h>
  29 #include <asm/tlbflush.h>
  30
  31 #include "proto.h"
  32 #include "irq_impl.h"
  33 #include "pci_impl.h"
  34 #include "machvec_impl.h"
  35
  36 /* Note mask bit is true for ENABLED irqs.  */
  37 static int cached_irq_mask;
  38
  39 static inline void
  40 noritake_update_irq_hw(int irq, int mask)
  41 {
  42         int port = 0x54a;
  43         if (irq >= 32) {
  44             mask >>= 16;
  45             port = 0x54c;
  46         }
  47         outw(mask, port);
  48 }
  49
  50 static void
  51 noritake_enable_irq(struct irq_data *d)
  52 {
  53         noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
  54 }
  55
  56 static void
  57 noritake_disable_irq(struct irq_data *d)
  58 {
  59         noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
  60 }
  61
  62 static struct irq_chip noritake_irq_type = {
  63         .name           = "NORITAKE",
  64         .irq_unmask     = noritake_enable_irq,
  65         .irq_mask       = noritake_disable_irq,
  66         .irq_mask_ack   = noritake_disable_irq,
  67 };
  68
  69 static void
  70 noritake_device_interrupt(unsigned long vector)
  71 {
  72         unsigned long pld;
  73         unsigned int i;
  74
  75         /* Read the interrupt summary registers of NORITAKE */
  76         pld = (((unsigned long) inw(0x54c) << 32)
  77                | ((unsigned long) inw(0x54a) << 16)
  78                | ((unsigned long) inb(0xa0) << 8)
  79                | inb(0x20));
  80
  81         /*
  82          * Now for every possible bit set, work through them and call
  83          * the appropriate interrupt handler.
  84          */
  85         while (pld) {
  86                 i = ffz(~pld);
  87                 pld &= pld - 1; /* clear least bit set */
  88                 if (i < 16) {
  89                         isa_device_interrupt(vector);
  90                 } else {
  91                         handle_irq(i);
  92                 }
  93         }
  94 }
  95
  96 static void
  97 noritake_srm_device_interrupt(unsigned long vector)
  98 {
  99         int irq;
 100
 101         irq = (vector - 0x800) >> 4;
 102
 103         /*
 104          * I really hate to do this, too, but the NORITAKE SRM console also
 105          * reports PCI vectors *lower* than I expected from the bit numbers
 106          * in the documentation.
 107          * But I really don't want to change the fixup code for allocation
 108          * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
 109          * look nice and clean now.
 110          * So, here's this additional grotty hack... :-(
 111          */
 112         if (irq >= 16)
 113                 irq = irq + 1;
 114
 115         handle_irq(irq);
 116 }
 117
 118 static void __init
 119 noritake_init_irq(void)
 120 {
 121         long i;
 122
 123         if (alpha_using_srm)
 124                 alpha_mv.device_interrupt = noritake_srm_device_interrupt;
 125
 126         outw(0, 0x54a);
 127         outw(0, 0x54c);
 128
 129         for (i = 16; i < 48; ++i) {
 130                 irq_set_chip_and_handler(i, &noritake_irq_type,
 131                                          handle_level_irq);
 132                 irq_set_status_flags(i, IRQ_LEVEL);
 133         }
 134
 135         init_i8259a_irqs();
 136         common_init_isa_dma();
 137 }
 138
 139
 140 /*
 141  * PCI Fixup configuration.
 142  *
 143  * Summary @ 0x542, summary register #1:
 144  * Bit      Meaning
 145  * 0        All valid ints from summary regs 2 & 3
 146  * 1        QLOGIC ISP1020A SCSI
 147  * 2        Interrupt Line A from slot 0
 148  * 3        Interrupt Line B from slot 0
 149  * 4        Interrupt Line A from slot 1
 150  * 5        Interrupt line B from slot 1
 151  * 6        Interrupt Line A from slot 2
 152  * 7        Interrupt Line B from slot 2
 153  * 8        Interrupt Line A from slot 3
 154  * 9        Interrupt Line B from slot 3
 155  *10        Interrupt Line A from slot 4
 156  *11        Interrupt Line B from slot 4
 157  *12        Interrupt Line A from slot 5
 158  *13        Interrupt Line B from slot 5
 159  *14        Interrupt Line A from slot 6
 160  *15        Interrupt Line B from slot 6
 161  *
 162  * Summary @ 0x544, summary register #2:
 163  * Bit      Meaning
 164  * 0        OR of all unmasked ints in SR #2
 165  * 1        OR of secondary bus ints
 166  * 2        Interrupt Line C from slot 0
 167  * 3        Interrupt Line D from slot 0
 168  * 4        Interrupt Line C from slot 1
 169  * 5        Interrupt line D from slot 1
 170  * 6        Interrupt Line C from slot 2
 171  * 7        Interrupt Line D from slot 2
 172  * 8        Interrupt Line C from slot 3
 173  * 9        Interrupt Line D from slot 3
 174  *10        Interrupt Line C from slot 4
 175  *11        Interrupt Line D from slot 4
 176  *12        Interrupt Line C from slot 5
 177  *13        Interrupt Line D from slot 5
 178  *14        Interrupt Line C from slot 6
 179  *15        Interrupt Line D from slot 6
 180  *
 181  * The device to slot mapping looks like:
 182  *
 183  * Slot     Device
 184  *  7       Intel PCI-EISA bridge chip
 185  *  8       DEC PCI-PCI bridge chip
 186  * 11       PCI on board slot 0
 187  * 12       PCI on board slot 1
 188  * 13       PCI on board slot 2
 189  *
 190  *
 191  * This two layered interrupt approach means that we allocate IRQ 16 and
 192  * above for PCI interrupts.  The IRQ relates to which bit the interrupt
 193  * comes in on.  This makes interrupt processing much easier.
 194  */
 195
 196 static int __init
 197 noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 198 {
 199         static char irq_tab[15][5] __initdata = {
 200                 /*INT    INTA   INTB   INTC   INTD */
 201                 /* note: IDSELs 16, 17, and 25 are CORELLE only */
 202                 { 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
 203                 {   -1,    -1,    -1,    -1,    -1},  /* IdSel 17, S3 Trio64 */
 204                 {   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCEB */
 205                 {   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PPB  */
 206                 {   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  ???? */
 207                 {   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  ???? */
 208                 { 16+2,  16+2,  16+3,  32+2,  32+3},  /* IdSel 22,  slot 0 */
 209                 { 16+4,  16+4,  16+5,  32+4,  32+5},  /* IdSel 23,  slot 1 */
 210                 { 16+6,  16+6,  16+7,  32+6,  32+7},  /* IdSel 24,  slot 2 */
 211                 { 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 25,  slot 3 */
 212                 /* The following 5 are actually on PCI bus 1, which is
 213                    across the built-in bridge of the NORITAKE only.  */
 214                 { 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
 215                 { 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 17,  slot 3 */
 216                 {16+10, 16+10, 16+11, 32+10, 32+11},  /* IdSel 18,  slot 4 */
 217                 {16+12, 16+12, 16+13, 32+12, 32+13},  /* IdSel 19,  slot 5 */
 218                 {16+14, 16+14, 16+15, 32+14, 32+15},  /* IdSel 20,  slot 6 */
 219         };
 220         const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
 221         return COMMON_TABLE_LOOKUP;
 222 }
 223
 224 static u8 __init
 225 noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 226 {
 227         int slot, pin = *pinp;
 228
 229         if (dev->bus->number == 0) {
 230                 slot = PCI_SLOT(dev->devfn);
 231         }
 232         /* Check for the built-in bridge */
 233         else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
 234                 slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
 235         }
 236         else
 237         {
 238                 /* Must be a card-based bridge.  */
 239                 do {
 240                         if (PCI_SLOT(dev->bus->self->devfn) == 8) {
 241                                 slot = PCI_SLOT(dev->devfn) + 15;
 242                                 break;
 243                         }
 244                         pin = pci_swizzle_interrupt_pin(dev, pin);
 245
 246                         /* Move up the chain of bridges.  */
 247                         dev = dev->bus->self;
 248                         /* Slot of the next bridge.  */
 249                         slot = PCI_SLOT(dev->devfn);
 250                 } while (dev->bus->self);
 251         }
 252         *pinp = pin;
 253         return slot;
 254 }
 255
 256 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
 257 static void
 258 noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
 259 {
 260 #define MCHK_NO_DEVSEL 0x205U
 261 #define MCHK_NO_TABT 0x204U
 262
 263         struct el_common *mchk_header;
 264         unsigned int code;
 265
 266         mchk_header = (struct el_common *)la_ptr;
 267
 268         /* Clear the error before any reporting.  */
 269         mb();
 270         mb(); /* magic */
 271         draina();
 272         apecs_pci_clr_err();
 273         wrmces(0x7);
 274         mb();
 275
 276         code = mchk_header->code;
 277         process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
 278                             (mcheck_expected(0)
 279                              && (code == MCHK_NO_DEVSEL
 280                                  || code == MCHK_NO_TABT)));
 281 }
 282 #endif
 283
 284
 285 /*
 286  * The System Vectors
 287  */
 288
 289 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
 290 struct alpha_machine_vector noritake_mv __initmv = {
 291         .vector_name            = "Noritake",
 292         DO_EV4_MMU,
 293         DO_DEFAULT_RTC,
 294         DO_APECS_IO,
 295         .machine_check          = noritake_apecs_machine_check,
 296         .max_isa_dma_address    = ALPHA_MAX_ISA_DMA_ADDRESS,
 297         .min_io_address         = EISA_DEFAULT_IO_BASE,
 298         .min_mem_address        = APECS_AND_LCA_DEFAULT_MEM_BASE,
 299
 300         .nr_irqs                = 48,
 301         .device_interrupt       = noritake_device_interrupt,
 302
 303         .init_arch              = apecs_init_arch,
 304         .init_irq               = noritake_init_irq,
 305         .init_rtc               = common_init_rtc,
 306         .init_pci               = common_init_pci,
 307         .pci_map_irq            = noritake_map_irq,
 308         .pci_swizzle            = noritake_swizzle,
 309 };
 310 ALIAS_MV(noritake)
 311 #endif
 312
 313 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 314 struct alpha_machine_vector noritake_primo_mv __initmv = {
 315         .vector_name            = "Noritake-Primo",
 316         DO_EV5_MMU,
 317         DO_DEFAULT_RTC,
 318         DO_CIA_IO,
 319         .machine_check          = cia_machine_check,
 320         .max_isa_dma_address    = ALPHA_MAX_ISA_DMA_ADDRESS,
 321         .min_io_address         = EISA_DEFAULT_IO_BASE,
 322         .min_mem_address        = CIA_DEFAULT_MEM_BASE,
 323
 324         .nr_irqs                = 48,
 325         .device_interrupt       = noritake_device_interrupt,
 326
 327         .init_arch              = cia_init_arch,
 328         .init_irq               = noritake_init_irq,
 329         .init_rtc               = common_init_rtc,
 330         .init_pci               = cia_init_pci,
 331         .kill_arch              = cia_kill_arch,
 332         .pci_map_irq            = noritake_map_irq,
 333         .pci_swizzle            = noritake_swizzle,
 334 };
 335 ALIAS_MV(noritake_primo)
 336 #endif